mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 04:54:41 +08:00
379c9a24cc
Most if not all i.MX SoC's call a function which enables all UARTS.
This is a problem for users who need to re-parent the clock source,
because any attempt to change the parent results in an busy error
due to the fact that the clocks have been enabled already.
clk: failed to reparent uart1 to sys_pll1_80m: -16
Instead of pre-initializing all UARTS, scan the device tree to see
which UART clocks are associated to stdout, and only enable those
UART clocks if it's needed early. This will move initialization of
the remaining clocks until after the parenting of the clocks.
When the clocks are shutdown, this mechanism will also disable any
clocks that were pre-initialized.
Fixes: 9461f7b33d
("clk: fix CLK_SET_RATE_GATE with clock rate protection")
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
255 lines
14 KiB
C
255 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017~2018 NXP
|
|
*
|
|
* Author: Dong Aisheng <aisheng.dong@nxp.com>
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx7ulp-clock.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "clk.h"
|
|
|
|
static const char * const pll_pre_sels[] = { "sosc", "firc", };
|
|
static const char * const spll_pfd_sels[] = { "spll_pfd0", "spll_pfd1", "spll_pfd2", "spll_pfd3", };
|
|
static const char * const spll_sels[] = { "spll", "spll_pfd_sel", };
|
|
static const char * const apll_pfd_sels[] = { "apll_pfd0", "apll_pfd1", "apll_pfd2", "apll_pfd3", };
|
|
static const char * const apll_sels[] = { "apll", "apll_pfd_sel", };
|
|
static const char * const scs_sels[] = { "dummy", "sosc", "sirc", "firc", "dummy", "apll_sel", "spll_sel", "dummy", };
|
|
static const char * const ddr_sels[] = { "apll_pfd_sel", "dummy", "dummy", "dummy", };
|
|
static const char * const nic_sels[] = { "firc", "ddr_clk", };
|
|
static const char * const periph_plat_sels[] = { "dummy", "nic1_bus_clk", "nic1_clk", "ddr_clk", "apll_pfd2", "apll_pfd1", "apll_pfd0", "upll", };
|
|
static const char * const periph_bus_sels[] = { "dummy", "sosc_bus_clk", "dummy", "firc_bus_clk", "rosc", "nic1_bus_clk", "nic1_clk", "spll_bus_clk", };
|
|
static const char * const arm_sels[] = { "core", "dummy", "dummy", "hsrun_core", };
|
|
|
|
/* used by sosc/sirc/firc/ddr/spll/apll dividers */
|
|
static const struct clk_div_table ulp_div_table[] = {
|
|
{ .val = 1, .div = 1, },
|
|
{ .val = 2, .div = 2, },
|
|
{ .val = 3, .div = 4, },
|
|
{ .val = 4, .div = 8, },
|
|
{ .val = 5, .div = 16, },
|
|
{ .val = 6, .div = 32, },
|
|
{ .val = 7, .div = 64, },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static void __init imx7ulp_clk_scg1_init(struct device_node *np)
|
|
{
|
|
struct clk_hw_onecell_data *clk_data;
|
|
struct clk_hw **hws;
|
|
void __iomem *base;
|
|
|
|
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_SCG1_END),
|
|
GFP_KERNEL);
|
|
if (!clk_data)
|
|
return;
|
|
|
|
clk_data->num = IMX7ULP_CLK_SCG1_END;
|
|
hws = clk_data->hws;
|
|
|
|
hws[IMX7ULP_CLK_DUMMY] = imx_clk_hw_fixed("dummy", 0);
|
|
|
|
hws[IMX7ULP_CLK_ROSC] = imx_obtain_fixed_clk_hw(np, "rosc");
|
|
hws[IMX7ULP_CLK_SOSC] = imx_obtain_fixed_clk_hw(np, "sosc");
|
|
hws[IMX7ULP_CLK_SIRC] = imx_obtain_fixed_clk_hw(np, "sirc");
|
|
hws[IMX7ULP_CLK_FIRC] = imx_obtain_fixed_clk_hw(np, "firc");
|
|
hws[IMX7ULP_CLK_UPLL] = imx_obtain_fixed_clk_hw(np, "upll");
|
|
|
|
/* SCG1 */
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
|
|
/* NOTE: xPLL config can't be changed when xPLL is enabled */
|
|
hws[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_hw_mux_flags("apll_pre_sel", base + 0x508, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
|
|
hws[IMX7ULP_CLK_SPLL_PRE_SEL] = imx_clk_hw_mux_flags("spll_pre_sel", base + 0x608, 0, 1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
|
|
|
|
/* name parent_name reg shift width flags */
|
|
hws[IMX7ULP_CLK_APLL_PRE_DIV] = imx_clk_hw_divider_flags("apll_pre_div", "apll_pre_sel", base + 0x508, 8, 3, CLK_SET_RATE_GATE);
|
|
hws[IMX7ULP_CLK_SPLL_PRE_DIV] = imx_clk_hw_divider_flags("spll_pre_div", "spll_pre_sel", base + 0x608, 8, 3, CLK_SET_RATE_GATE);
|
|
|
|
/* name parent_name base */
|
|
hws[IMX7ULP_CLK_APLL] = imx_clk_hw_pllv4("apll", "apll_pre_div", base + 0x500);
|
|
hws[IMX7ULP_CLK_SPLL] = imx_clk_hw_pllv4("spll", "spll_pre_div", base + 0x600);
|
|
|
|
/* APLL PFDs */
|
|
hws[IMX7ULP_CLK_APLL_PFD0] = imx_clk_hw_pfdv2("apll_pfd0", "apll", base + 0x50c, 0);
|
|
hws[IMX7ULP_CLK_APLL_PFD1] = imx_clk_hw_pfdv2("apll_pfd1", "apll", base + 0x50c, 1);
|
|
hws[IMX7ULP_CLK_APLL_PFD2] = imx_clk_hw_pfdv2("apll_pfd2", "apll", base + 0x50c, 2);
|
|
hws[IMX7ULP_CLK_APLL_PFD3] = imx_clk_hw_pfdv2("apll_pfd3", "apll", base + 0x50c, 3);
|
|
|
|
/* SPLL PFDs */
|
|
hws[IMX7ULP_CLK_SPLL_PFD0] = imx_clk_hw_pfdv2("spll_pfd0", "spll", base + 0x60C, 0);
|
|
hws[IMX7ULP_CLK_SPLL_PFD1] = imx_clk_hw_pfdv2("spll_pfd1", "spll", base + 0x60C, 1);
|
|
hws[IMX7ULP_CLK_SPLL_PFD2] = imx_clk_hw_pfdv2("spll_pfd2", "spll", base + 0x60C, 2);
|
|
hws[IMX7ULP_CLK_SPLL_PFD3] = imx_clk_hw_pfdv2("spll_pfd3", "spll", base + 0x60C, 3);
|
|
|
|
/* PLL Mux */
|
|
hws[IMX7ULP_CLK_APLL_PFD_SEL] = imx_clk_hw_mux_flags("apll_pfd_sel", base + 0x508, 14, 2, apll_pfd_sels, ARRAY_SIZE(apll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
|
|
hws[IMX7ULP_CLK_SPLL_PFD_SEL] = imx_clk_hw_mux_flags("spll_pfd_sel", base + 0x608, 14, 2, spll_pfd_sels, ARRAY_SIZE(spll_pfd_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
|
|
hws[IMX7ULP_CLK_APLL_SEL] = imx_clk_hw_mux_flags("apll_sel", base + 0x508, 1, 1, apll_sels, ARRAY_SIZE(apll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
|
|
hws[IMX7ULP_CLK_SPLL_SEL] = imx_clk_hw_mux_flags("spll_sel", base + 0x608, 1, 1, spll_sels, ARRAY_SIZE(spll_sels), CLK_SET_RATE_PARENT | CLK_SET_PARENT_GATE);
|
|
|
|
hws[IMX7ULP_CLK_SPLL_BUS_CLK] = imx_clk_hw_divider_gate("spll_bus_clk", "spll_sel", CLK_SET_RATE_GATE, base + 0x604, 8, 3, 0, ulp_div_table, &imx_ccm_lock);
|
|
|
|
/* scs/ddr/nic select different clock source requires that clock to be enabled first */
|
|
hws[IMX7ULP_CLK_SYS_SEL] = imx_clk_hw_mux2("scs_sel", base + 0x14, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
|
|
hws[IMX7ULP_CLK_HSRUN_SYS_SEL] = imx_clk_hw_mux2("hsrun_scs_sel", base + 0x1c, 24, 4, scs_sels, ARRAY_SIZE(scs_sels));
|
|
hws[IMX7ULP_CLK_NIC_SEL] = imx_clk_hw_mux2("nic_sel", base + 0x40, 28, 1, nic_sels, ARRAY_SIZE(nic_sels));
|
|
hws[IMX7ULP_CLK_DDR_SEL] = imx_clk_hw_mux_flags("ddr_sel", base + 0x30, 24, 2, ddr_sels, ARRAY_SIZE(ddr_sels), CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE);
|
|
|
|
hws[IMX7ULP_CLK_CORE_DIV] = imx_clk_hw_divider_flags("divcore", "scs_sel", base + 0x14, 16, 4, CLK_SET_RATE_PARENT);
|
|
hws[IMX7ULP_CLK_CORE] = imx_clk_hw_cpu("core", "divcore", hws[IMX7ULP_CLK_CORE_DIV]->clk, hws[IMX7ULP_CLK_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
|
|
hws[IMX7ULP_CLK_HSRUN_CORE_DIV] = imx_clk_hw_divider_flags("hsrun_divcore", "hsrun_scs_sel", base + 0x1c, 16, 4, CLK_SET_RATE_PARENT);
|
|
hws[IMX7ULP_CLK_HSRUN_CORE] = imx_clk_hw_cpu("hsrun_core", "hsrun_divcore", hws[IMX7ULP_CLK_HSRUN_CORE_DIV]->clk, hws[IMX7ULP_CLK_HSRUN_SYS_SEL]->clk, hws[IMX7ULP_CLK_SPLL_SEL]->clk, hws[IMX7ULP_CLK_FIRC]->clk);
|
|
|
|
hws[IMX7ULP_CLK_DDR_DIV] = imx_clk_hw_divider_gate("ddr_clk", "ddr_sel", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, base + 0x30, 0, 3,
|
|
0, ulp_div_table, &imx_ccm_lock);
|
|
|
|
hws[IMX7ULP_CLK_NIC0_DIV] = imx_clk_hw_divider_flags("nic0_clk", "nic_sel", base + 0x40, 24, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
|
|
hws[IMX7ULP_CLK_NIC1_DIV] = imx_clk_hw_divider_flags("nic1_clk", "nic0_clk", base + 0x40, 16, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
|
|
hws[IMX7ULP_CLK_NIC1_BUS_DIV] = imx_clk_hw_divider_flags("nic1_bus_clk", "nic0_clk", base + 0x40, 4, 4, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
|
|
|
|
hws[IMX7ULP_CLK_GPU_DIV] = imx_clk_hw_divider("gpu_clk", "nic0_clk", base + 0x40, 20, 4);
|
|
|
|
hws[IMX7ULP_CLK_SOSC_BUS_CLK] = imx_clk_hw_divider_gate("sosc_bus_clk", "sosc", 0, base + 0x104, 8, 3,
|
|
CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
|
|
hws[IMX7ULP_CLK_FIRC_BUS_CLK] = imx_clk_hw_divider_gate("firc_bus_clk", "firc", 0, base + 0x304, 8, 3,
|
|
CLK_DIVIDER_READ_ONLY, ulp_div_table, &imx_ccm_lock);
|
|
|
|
imx_check_clk_hws(hws, clk_data->num);
|
|
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
|
|
}
|
|
CLK_OF_DECLARE(imx7ulp_clk_scg1, "fsl,imx7ulp-scg1", imx7ulp_clk_scg1_init);
|
|
|
|
static void __init imx7ulp_clk_pcc2_init(struct device_node *np)
|
|
{
|
|
struct clk_hw_onecell_data *clk_data;
|
|
struct clk_hw **hws;
|
|
void __iomem *base;
|
|
|
|
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC2_END),
|
|
GFP_KERNEL);
|
|
if (!clk_data)
|
|
return;
|
|
|
|
clk_data->num = IMX7ULP_CLK_PCC2_END;
|
|
hws = clk_data->hws;
|
|
|
|
/* PCC2 */
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
|
|
hws[IMX7ULP_CLK_DMA1] = imx_clk_hw_gate("dma1", "nic1_clk", base + 0x20, 30);
|
|
hws[IMX7ULP_CLK_RGPIO2P1] = imx_clk_hw_gate("rgpio2p1", "nic1_bus_clk", base + 0x3c, 30);
|
|
hws[IMX7ULP_CLK_DMA_MUX1] = imx_clk_hw_gate("dma_mux1", "nic1_bus_clk", base + 0x84, 30);
|
|
hws[IMX7ULP_CLK_CAAM] = imx_clk_hw_gate("caam", "nic1_clk", base + 0x90, 30);
|
|
hws[IMX7ULP_CLK_LPTPM4] = imx7ulp_clk_hw_composite("lptpm4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
|
|
hws[IMX7ULP_CLK_LPTPM5] = imx7ulp_clk_hw_composite("lptpm5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
|
|
hws[IMX7ULP_CLK_LPIT1] = imx7ulp_clk_hw_composite("lpit1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
|
|
hws[IMX7ULP_CLK_LPSPI2] = imx7ulp_clk_hw_composite("lpspi2", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa4);
|
|
hws[IMX7ULP_CLK_LPSPI3] = imx7ulp_clk_hw_composite("lpspi3", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xa8);
|
|
hws[IMX7ULP_CLK_LPI2C4] = imx7ulp_clk_hw_composite("lpi2c4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xac);
|
|
hws[IMX7ULP_CLK_LPI2C5] = imx7ulp_clk_hw_composite("lpi2c5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb0);
|
|
hws[IMX7ULP_CLK_LPUART4] = imx7ulp_clk_hw_composite("lpuart4", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb4);
|
|
hws[IMX7ULP_CLK_LPUART5] = imx7ulp_clk_hw_composite("lpuart5", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xb8);
|
|
hws[IMX7ULP_CLK_FLEXIO1] = imx7ulp_clk_hw_composite("flexio1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0xc4);
|
|
hws[IMX7ULP_CLK_USB0] = imx7ulp_clk_hw_composite("usb0", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xcc);
|
|
hws[IMX7ULP_CLK_USB1] = imx7ulp_clk_hw_composite("usb1", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xd0);
|
|
hws[IMX7ULP_CLK_USB_PHY] = imx_clk_hw_gate("usb_phy", "nic1_bus_clk", base + 0xd4, 30);
|
|
hws[IMX7ULP_CLK_USDHC0] = imx7ulp_clk_hw_composite("usdhc0", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xdc);
|
|
hws[IMX7ULP_CLK_USDHC1] = imx7ulp_clk_hw_composite("usdhc1", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xe0);
|
|
hws[IMX7ULP_CLK_WDG1] = imx7ulp_clk_hw_composite("wdg1", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0xf4);
|
|
hws[IMX7ULP_CLK_WDG2] = imx7ulp_clk_hw_composite("wdg2", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0x10c);
|
|
|
|
imx_check_clk_hws(hws, clk_data->num);
|
|
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
|
|
|
|
imx_register_uart_clocks(2);
|
|
}
|
|
CLK_OF_DECLARE(imx7ulp_clk_pcc2, "fsl,imx7ulp-pcc2", imx7ulp_clk_pcc2_init);
|
|
|
|
static void __init imx7ulp_clk_pcc3_init(struct device_node *np)
|
|
{
|
|
struct clk_hw_onecell_data *clk_data;
|
|
struct clk_hw **hws;
|
|
void __iomem *base;
|
|
|
|
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_PCC3_END),
|
|
GFP_KERNEL);
|
|
if (!clk_data)
|
|
return;
|
|
|
|
clk_data->num = IMX7ULP_CLK_PCC3_END;
|
|
hws = clk_data->hws;
|
|
|
|
/* PCC3 */
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
|
|
hws[IMX7ULP_CLK_LPTPM6] = imx7ulp_clk_hw_composite("lptpm6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x84);
|
|
hws[IMX7ULP_CLK_LPTPM7] = imx7ulp_clk_hw_composite("lptpm7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x88);
|
|
|
|
hws[IMX7ULP_CLK_MMDC] = clk_hw_register_gate(NULL, "mmdc", "nic1_clk", CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
|
|
base + 0xac, 30, 0, &imx_ccm_lock);
|
|
hws[IMX7ULP_CLK_LPI2C6] = imx7ulp_clk_hw_composite("lpi2c6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x90);
|
|
hws[IMX7ULP_CLK_LPI2C7] = imx7ulp_clk_hw_composite("lpi2c7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x94);
|
|
hws[IMX7ULP_CLK_LPUART6] = imx7ulp_clk_hw_composite("lpuart6", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x98);
|
|
hws[IMX7ULP_CLK_LPUART7] = imx7ulp_clk_hw_composite("lpuart7", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, false, true, base + 0x9c);
|
|
hws[IMX7ULP_CLK_DSI] = imx7ulp_clk_hw_composite("dsi", periph_bus_sels, ARRAY_SIZE(periph_bus_sels), true, true, true, base + 0xa4);
|
|
hws[IMX7ULP_CLK_LCDIF] = imx7ulp_clk_hw_composite("lcdif", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, true, true, base + 0xa8);
|
|
|
|
hws[IMX7ULP_CLK_VIU] = imx_clk_hw_gate("viu", "nic1_clk", base + 0xa0, 30);
|
|
hws[IMX7ULP_CLK_PCTLC] = imx_clk_hw_gate("pctlc", "nic1_bus_clk", base + 0xb8, 30);
|
|
hws[IMX7ULP_CLK_PCTLD] = imx_clk_hw_gate("pctld", "nic1_bus_clk", base + 0xbc, 30);
|
|
hws[IMX7ULP_CLK_PCTLE] = imx_clk_hw_gate("pctle", "nic1_bus_clk", base + 0xc0, 30);
|
|
hws[IMX7ULP_CLK_PCTLF] = imx_clk_hw_gate("pctlf", "nic1_bus_clk", base + 0xc4, 30);
|
|
|
|
hws[IMX7ULP_CLK_GPU3D] = imx7ulp_clk_hw_composite("gpu3d", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x140);
|
|
hws[IMX7ULP_CLK_GPU2D] = imx7ulp_clk_hw_composite("gpu2d", periph_plat_sels, ARRAY_SIZE(periph_plat_sels), true, false, true, base + 0x144);
|
|
|
|
imx_check_clk_hws(hws, clk_data->num);
|
|
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
|
|
|
|
imx_register_uart_clocks(7);
|
|
}
|
|
CLK_OF_DECLARE(imx7ulp_clk_pcc3, "fsl,imx7ulp-pcc3", imx7ulp_clk_pcc3_init);
|
|
|
|
static void __init imx7ulp_clk_smc1_init(struct device_node *np)
|
|
{
|
|
struct clk_hw_onecell_data *clk_data;
|
|
struct clk_hw **hws;
|
|
void __iomem *base;
|
|
|
|
clk_data = kzalloc(struct_size(clk_data, hws, IMX7ULP_CLK_SMC1_END),
|
|
GFP_KERNEL);
|
|
if (!clk_data)
|
|
return;
|
|
|
|
clk_data->num = IMX7ULP_CLK_SMC1_END;
|
|
hws = clk_data->hws;
|
|
|
|
/* SMC1 */
|
|
base = of_iomap(np, 0);
|
|
WARN_ON(!base);
|
|
|
|
hws[IMX7ULP_CLK_ARM] = imx_clk_hw_mux_flags("arm", base + 0x10, 8, 2, arm_sels, ARRAY_SIZE(arm_sels), CLK_SET_RATE_PARENT);
|
|
|
|
imx_check_clk_hws(hws, clk_data->num);
|
|
|
|
of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data);
|
|
}
|
|
CLK_OF_DECLARE(imx7ulp_clk_smc1, "fsl,imx7ulp-smc1", imx7ulp_clk_smc1_init);
|