mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 09:44:18 +08:00
2dd54a54c1
The .buf_queue() V4L2 driver method is called under spinlock_irqsave(q->irqlock,...), don't take the lock again inside the function. Reported-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
820 lines
20 KiB
C
820 lines
20 KiB
C
/*
|
|
* V4L2 Driver for i.MXL/i.MXL camera (CSI) host
|
|
*
|
|
* Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
|
|
* Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
|
|
*
|
|
* Based on PXA SoC camera driver
|
|
* Copyright (C) 2006, Sascha Hauer, Pengutronix
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/time.h>
|
|
#include <linux/version.h>
|
|
#include <linux/videodev2.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-dev.h>
|
|
#include <media/videobuf-dma-contig.h>
|
|
|
|
#include <asm/dma.h>
|
|
#include <asm/fiq.h>
|
|
#include <mach/dma-mx1-mx2.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/mx1_camera.h>
|
|
|
|
/*
|
|
* CSI registers
|
|
*/
|
|
#define DMA_CCR(x) (0x8c + ((x) << 6)) /* Control Registers */
|
|
#define DMA_DIMR 0x08 /* Interrupt mask Register */
|
|
#define CSICR1 0x00 /* CSI Control Register 1 */
|
|
#define CSISR 0x08 /* CSI Status Register */
|
|
#define CSIRXR 0x10 /* CSI RxFIFO Register */
|
|
|
|
#define CSICR1_RXFF_LEVEL(x) (((x) & 0x3) << 19)
|
|
#define CSICR1_SOF_POL (1 << 17)
|
|
#define CSICR1_SOF_INTEN (1 << 16)
|
|
#define CSICR1_MCLKDIV(x) (((x) & 0xf) << 12)
|
|
#define CSICR1_MCLKEN (1 << 9)
|
|
#define CSICR1_FCC (1 << 8)
|
|
#define CSICR1_BIG_ENDIAN (1 << 7)
|
|
#define CSICR1_CLR_RXFIFO (1 << 5)
|
|
#define CSICR1_GCLK_MODE (1 << 4)
|
|
#define CSICR1_DATA_POL (1 << 2)
|
|
#define CSICR1_REDGE (1 << 1)
|
|
#define CSICR1_EN (1 << 0)
|
|
|
|
#define CSISR_SFF_OR_INT (1 << 25)
|
|
#define CSISR_RFF_OR_INT (1 << 24)
|
|
#define CSISR_STATFF_INT (1 << 21)
|
|
#define CSISR_RXFF_INT (1 << 18)
|
|
#define CSISR_SOF_INT (1 << 16)
|
|
#define CSISR_DRDY (1 << 0)
|
|
|
|
#define VERSION_CODE KERNEL_VERSION(0, 0, 1)
|
|
#define DRIVER_NAME "mx1-camera"
|
|
|
|
#define CSI_IRQ_MASK (CSISR_SFF_OR_INT | CSISR_RFF_OR_INT | \
|
|
CSISR_STATFF_INT | CSISR_RXFF_INT | CSISR_SOF_INT)
|
|
|
|
#define CSI_BUS_FLAGS (SOCAM_MASTER | SOCAM_HSYNC_ACTIVE_HIGH | \
|
|
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW | \
|
|
SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING | \
|
|
SOCAM_DATA_ACTIVE_HIGH | SOCAM_DATA_ACTIVE_LOW | \
|
|
SOCAM_DATAWIDTH_8)
|
|
|
|
#define MAX_VIDEO_MEM 16 /* Video memory limit in megabytes */
|
|
|
|
/*
|
|
* Structures
|
|
*/
|
|
|
|
/* buffer for one video frame */
|
|
struct mx1_buffer {
|
|
/* common v4l buffer stuff -- must be first */
|
|
struct videobuf_buffer vb;
|
|
const struct soc_camera_data_format *fmt;
|
|
int inwork;
|
|
};
|
|
|
|
/* i.MX1/i.MXL is only supposed to handle one camera on its Camera Sensor
|
|
* Interface. If anyone ever builds hardware to enable more than
|
|
* one camera, they will have to modify this driver too */
|
|
struct mx1_camera_dev {
|
|
struct soc_camera_host soc_host;
|
|
struct soc_camera_device *icd;
|
|
struct mx1_camera_pdata *pdata;
|
|
struct mx1_buffer *active;
|
|
struct resource *res;
|
|
struct clk *clk;
|
|
struct list_head capture;
|
|
|
|
void __iomem *base;
|
|
int dma_chan;
|
|
unsigned int irq;
|
|
unsigned long mclk;
|
|
|
|
spinlock_t lock;
|
|
};
|
|
|
|
/*
|
|
* Videobuf operations
|
|
*/
|
|
static int mx1_videobuf_setup(struct videobuf_queue *vq, unsigned int *count,
|
|
unsigned int *size)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
|
|
*size = icd->width * icd->height *
|
|
((icd->current_fmt->depth + 7) >> 3);
|
|
|
|
if (!*count)
|
|
*count = 32;
|
|
|
|
while (*size * *count > MAX_VIDEO_MEM * 1024 * 1024)
|
|
(*count)--;
|
|
|
|
dev_dbg(&icd->dev, "count=%d, size=%d\n", *count, *size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void free_buffer(struct videobuf_queue *vq, struct mx1_buffer *buf)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct videobuf_buffer *vb = &buf->vb;
|
|
|
|
BUG_ON(in_interrupt());
|
|
|
|
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
|
|
vb, vb->baddr, vb->bsize);
|
|
|
|
/* This waits until this buffer is out of danger, i.e., until it is no
|
|
* longer in STATE_QUEUED or STATE_ACTIVE */
|
|
videobuf_waiton(vb, 0, 0);
|
|
videobuf_dma_contig_free(vq, vb);
|
|
|
|
vb->state = VIDEOBUF_NEEDS_INIT;
|
|
}
|
|
|
|
static int mx1_videobuf_prepare(struct videobuf_queue *vq,
|
|
struct videobuf_buffer *vb, enum v4l2_field field)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
|
|
int ret;
|
|
|
|
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
|
|
vb, vb->baddr, vb->bsize);
|
|
|
|
/* Added list head initialization on alloc */
|
|
WARN_ON(!list_empty(&vb->queue));
|
|
|
|
BUG_ON(NULL == icd->current_fmt);
|
|
|
|
/* I think, in buf_prepare you only have to protect global data,
|
|
* the actual buffer is yours */
|
|
buf->inwork = 1;
|
|
|
|
if (buf->fmt != icd->current_fmt ||
|
|
vb->width != icd->width ||
|
|
vb->height != icd->height ||
|
|
vb->field != field) {
|
|
buf->fmt = icd->current_fmt;
|
|
vb->width = icd->width;
|
|
vb->height = icd->height;
|
|
vb->field = field;
|
|
vb->state = VIDEOBUF_NEEDS_INIT;
|
|
}
|
|
|
|
vb->size = vb->width * vb->height * ((buf->fmt->depth + 7) >> 3);
|
|
if (0 != vb->baddr && vb->bsize < vb->size) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (vb->state == VIDEOBUF_NEEDS_INIT) {
|
|
ret = videobuf_iolock(vq, vb, NULL);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
vb->state = VIDEOBUF_PREPARED;
|
|
}
|
|
|
|
buf->inwork = 0;
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
free_buffer(vq, buf);
|
|
out:
|
|
buf->inwork = 0;
|
|
return ret;
|
|
}
|
|
|
|
static int mx1_camera_setup_dma(struct mx1_camera_dev *pcdev)
|
|
{
|
|
struct videobuf_buffer *vbuf = &pcdev->active->vb;
|
|
int ret;
|
|
|
|
if (unlikely(!pcdev->active)) {
|
|
dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* setup sg list for future DMA */
|
|
ret = imx_dma_setup_single(pcdev->dma_chan,
|
|
videobuf_to_dma_contig(vbuf),
|
|
vbuf->size, pcdev->res->start +
|
|
CSIRXR, DMA_MODE_READ);
|
|
if (unlikely(ret))
|
|
dev_err(pcdev->soc_host.dev, "Failed to setup DMA sg list\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Called under spinlock_irqsave(&pcdev->lock, ...) */
|
|
static void mx1_videobuf_queue(struct videobuf_queue *vq,
|
|
struct videobuf_buffer *vb)
|
|
{
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx1_camera_dev *pcdev = ici->priv;
|
|
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
|
|
|
|
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
|
|
vb, vb->baddr, vb->bsize);
|
|
|
|
list_add_tail(&vb->queue, &pcdev->capture);
|
|
|
|
vb->state = VIDEOBUF_ACTIVE;
|
|
|
|
if (!pcdev->active) {
|
|
pcdev->active = buf;
|
|
|
|
/* setup sg list for future DMA */
|
|
if (!mx1_camera_setup_dma(pcdev)) {
|
|
unsigned int temp;
|
|
/* enable SOF irq */
|
|
temp = __raw_readl(pcdev->base + CSICR1) |
|
|
CSICR1_SOF_INTEN;
|
|
__raw_writel(temp, pcdev->base + CSICR1);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void mx1_videobuf_release(struct videobuf_queue *vq,
|
|
struct videobuf_buffer *vb)
|
|
{
|
|
struct mx1_buffer *buf = container_of(vb, struct mx1_buffer, vb);
|
|
#ifdef DEBUG
|
|
struct soc_camera_device *icd = vq->priv_data;
|
|
|
|
dev_dbg(&icd->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
|
|
vb, vb->baddr, vb->bsize);
|
|
|
|
switch (vb->state) {
|
|
case VIDEOBUF_ACTIVE:
|
|
dev_dbg(&icd->dev, "%s (active)\n", __func__);
|
|
break;
|
|
case VIDEOBUF_QUEUED:
|
|
dev_dbg(&icd->dev, "%s (queued)\n", __func__);
|
|
break;
|
|
case VIDEOBUF_PREPARED:
|
|
dev_dbg(&icd->dev, "%s (prepared)\n", __func__);
|
|
break;
|
|
default:
|
|
dev_dbg(&icd->dev, "%s (unknown)\n", __func__);
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
free_buffer(vq, buf);
|
|
}
|
|
|
|
static void mx1_camera_wakeup(struct mx1_camera_dev *pcdev,
|
|
struct videobuf_buffer *vb,
|
|
struct mx1_buffer *buf)
|
|
{
|
|
/* _init is used to debug races, see comment in mx1_camera_reqbufs() */
|
|
list_del_init(&vb->queue);
|
|
vb->state = VIDEOBUF_DONE;
|
|
do_gettimeofday(&vb->ts);
|
|
vb->field_count++;
|
|
wake_up(&vb->done);
|
|
|
|
if (list_empty(&pcdev->capture)) {
|
|
pcdev->active = NULL;
|
|
return;
|
|
}
|
|
|
|
pcdev->active = list_entry(pcdev->capture.next,
|
|
struct mx1_buffer, vb.queue);
|
|
|
|
/* setup sg list for future DMA */
|
|
if (likely(!mx1_camera_setup_dma(pcdev))) {
|
|
unsigned int temp;
|
|
|
|
/* enable SOF irq */
|
|
temp = __raw_readl(pcdev->base + CSICR1) | CSICR1_SOF_INTEN;
|
|
__raw_writel(temp, pcdev->base + CSICR1);
|
|
}
|
|
}
|
|
|
|
static void mx1_camera_dma_irq(int channel, void *data)
|
|
{
|
|
struct mx1_camera_dev *pcdev = data;
|
|
struct mx1_buffer *buf;
|
|
struct videobuf_buffer *vb;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pcdev->lock, flags);
|
|
|
|
imx_dma_disable(channel);
|
|
|
|
if (unlikely(!pcdev->active)) {
|
|
dev_err(pcdev->soc_host.dev, "DMA End IRQ with no active buffer\n");
|
|
goto out;
|
|
}
|
|
|
|
vb = &pcdev->active->vb;
|
|
buf = container_of(vb, struct mx1_buffer, vb);
|
|
WARN_ON(buf->inwork || list_empty(&vb->queue));
|
|
dev_dbg(pcdev->soc_host.dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__,
|
|
vb, vb->baddr, vb->bsize);
|
|
|
|
mx1_camera_wakeup(pcdev, vb, buf);
|
|
out:
|
|
spin_unlock_irqrestore(&pcdev->lock, flags);
|
|
}
|
|
|
|
static struct videobuf_queue_ops mx1_videobuf_ops = {
|
|
.buf_setup = mx1_videobuf_setup,
|
|
.buf_prepare = mx1_videobuf_prepare,
|
|
.buf_queue = mx1_videobuf_queue,
|
|
.buf_release = mx1_videobuf_release,
|
|
};
|
|
|
|
static void mx1_camera_init_videobuf(struct videobuf_queue *q,
|
|
struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx1_camera_dev *pcdev = ici->priv;
|
|
|
|
videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, ici->dev,
|
|
&pcdev->lock,
|
|
V4L2_BUF_TYPE_VIDEO_CAPTURE,
|
|
V4L2_FIELD_NONE,
|
|
sizeof(struct mx1_buffer), icd);
|
|
}
|
|
|
|
static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
|
|
{
|
|
unsigned int mclk = pcdev->mclk;
|
|
unsigned long div;
|
|
unsigned long lcdclk;
|
|
|
|
lcdclk = clk_get_rate(pcdev->clk);
|
|
|
|
/* We verify platform_mclk_10khz != 0, so if anyone breaks it, here
|
|
* they get a nice Oops */
|
|
div = (lcdclk + 2 * mclk - 1) / (2 * mclk) - 1;
|
|
|
|
dev_dbg(pcdev->soc_host.dev, "System clock %lukHz, target freq %dkHz, "
|
|
"divisor %lu\n", lcdclk / 1000, mclk / 1000, div);
|
|
|
|
return div;
|
|
}
|
|
|
|
static void mx1_camera_activate(struct mx1_camera_dev *pcdev)
|
|
{
|
|
unsigned int csicr1 = CSICR1_EN;
|
|
|
|
dev_dbg(pcdev->soc_host.dev, "Activate device\n");
|
|
|
|
clk_enable(pcdev->clk);
|
|
|
|
/* enable CSI before doing anything else */
|
|
__raw_writel(csicr1, pcdev->base + CSICR1);
|
|
|
|
csicr1 |= CSICR1_MCLKEN | CSICR1_FCC | CSICR1_GCLK_MODE;
|
|
csicr1 |= CSICR1_MCLKDIV(mclk_get_divisor(pcdev));
|
|
csicr1 |= CSICR1_RXFF_LEVEL(2); /* 16 words */
|
|
|
|
__raw_writel(csicr1, pcdev->base + CSICR1);
|
|
}
|
|
|
|
static void mx1_camera_deactivate(struct mx1_camera_dev *pcdev)
|
|
{
|
|
dev_dbg(pcdev->soc_host.dev, "Deactivate device\n");
|
|
|
|
/* Disable all CSI interface */
|
|
__raw_writel(0x00, pcdev->base + CSICR1);
|
|
|
|
clk_disable(pcdev->clk);
|
|
}
|
|
|
|
/* The following two functions absolutely depend on the fact, that
|
|
* there can be only one camera on i.MX1/i.MXL camera sensor interface */
|
|
static int mx1_camera_add_device(struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx1_camera_dev *pcdev = ici->priv;
|
|
int ret;
|
|
|
|
if (pcdev->icd) {
|
|
ret = -EBUSY;
|
|
goto ebusy;
|
|
}
|
|
|
|
dev_info(&icd->dev, "MX1 Camera driver attached to camera %d\n",
|
|
icd->devnum);
|
|
|
|
mx1_camera_activate(pcdev);
|
|
ret = icd->ops->init(icd);
|
|
|
|
if (!ret)
|
|
pcdev->icd = icd;
|
|
|
|
ebusy:
|
|
return ret;
|
|
}
|
|
|
|
static void mx1_camera_remove_device(struct soc_camera_device *icd)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx1_camera_dev *pcdev = ici->priv;
|
|
unsigned int csicr1;
|
|
|
|
BUG_ON(icd != pcdev->icd);
|
|
|
|
/* disable interrupts */
|
|
csicr1 = __raw_readl(pcdev->base + CSICR1) & ~CSI_IRQ_MASK;
|
|
__raw_writel(csicr1, pcdev->base + CSICR1);
|
|
|
|
/* Stop DMA engine */
|
|
imx_dma_disable(pcdev->dma_chan);
|
|
|
|
dev_info(&icd->dev, "MX1 Camera driver detached from camera %d\n",
|
|
icd->devnum);
|
|
|
|
icd->ops->release(icd);
|
|
|
|
mx1_camera_deactivate(pcdev);
|
|
|
|
pcdev->icd = NULL;
|
|
}
|
|
|
|
static int mx1_camera_set_crop(struct soc_camera_device *icd,
|
|
struct v4l2_rect *rect)
|
|
{
|
|
return icd->ops->set_crop(icd, rect);
|
|
}
|
|
|
|
static int mx1_camera_set_bus_param(struct soc_camera_device *icd, __u32 pixfmt)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
struct mx1_camera_dev *pcdev = ici->priv;
|
|
unsigned long camera_flags, common_flags;
|
|
unsigned int csicr1;
|
|
int ret;
|
|
|
|
camera_flags = icd->ops->query_bus_param(icd);
|
|
|
|
/* MX1 supports only 8bit buswidth */
|
|
common_flags = soc_camera_bus_param_compatible(camera_flags,
|
|
CSI_BUS_FLAGS);
|
|
if (!common_flags)
|
|
return -EINVAL;
|
|
|
|
icd->buswidth = 8;
|
|
|
|
/* Make choises, based on platform choice */
|
|
if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) &&
|
|
(common_flags & SOCAM_VSYNC_ACTIVE_LOW)) {
|
|
if (!pcdev->pdata ||
|
|
pcdev->pdata->flags & MX1_CAMERA_VSYNC_HIGH)
|
|
common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW;
|
|
else
|
|
common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH;
|
|
}
|
|
|
|
if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) &&
|
|
(common_flags & SOCAM_PCLK_SAMPLE_FALLING)) {
|
|
if (!pcdev->pdata ||
|
|
pcdev->pdata->flags & MX1_CAMERA_PCLK_RISING)
|
|
common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING;
|
|
else
|
|
common_flags &= ~SOCAM_PCLK_SAMPLE_RISING;
|
|
}
|
|
|
|
if ((common_flags & SOCAM_DATA_ACTIVE_HIGH) &&
|
|
(common_flags & SOCAM_DATA_ACTIVE_LOW)) {
|
|
if (!pcdev->pdata ||
|
|
pcdev->pdata->flags & MX1_CAMERA_DATA_HIGH)
|
|
common_flags &= ~SOCAM_DATA_ACTIVE_LOW;
|
|
else
|
|
common_flags &= ~SOCAM_DATA_ACTIVE_HIGH;
|
|
}
|
|
|
|
ret = icd->ops->set_bus_param(icd, common_flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
csicr1 = __raw_readl(pcdev->base + CSICR1);
|
|
|
|
if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
|
|
csicr1 |= CSICR1_REDGE;
|
|
if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
|
|
csicr1 |= CSICR1_SOF_POL;
|
|
if (common_flags & SOCAM_DATA_ACTIVE_LOW)
|
|
csicr1 |= CSICR1_DATA_POL;
|
|
|
|
__raw_writel(csicr1, pcdev->base + CSICR1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mx1_camera_set_fmt(struct soc_camera_device *icd,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
|
|
const struct soc_camera_format_xlate *xlate;
|
|
struct v4l2_pix_format *pix = &f->fmt.pix;
|
|
int ret;
|
|
|
|
xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat);
|
|
if (!xlate) {
|
|
dev_warn(ici->dev, "Format %x not found\n", pix->pixelformat);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = icd->ops->set_fmt(icd, f);
|
|
if (!ret) {
|
|
icd->buswidth = xlate->buswidth;
|
|
icd->current_fmt = xlate->host_fmt;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mx1_camera_try_fmt(struct soc_camera_device *icd,
|
|
struct v4l2_format *f)
|
|
{
|
|
/* TODO: limit to mx1 hardware capabilities */
|
|
|
|
/* limit to sensor capabilities */
|
|
return icd->ops->try_fmt(icd, f);
|
|
}
|
|
|
|
static int mx1_camera_reqbufs(struct soc_camera_file *icf,
|
|
struct v4l2_requestbuffers *p)
|
|
{
|
|
int i;
|
|
|
|
/* This is for locking debugging only. I removed spinlocks and now I
|
|
* check whether .prepare is ever called on a linked buffer, or whether
|
|
* a dma IRQ can occur for an in-work or unlinked buffer. Until now
|
|
* it hadn't triggered */
|
|
for (i = 0; i < p->count; i++) {
|
|
struct mx1_buffer *buf = container_of(icf->vb_vidq.bufs[i],
|
|
struct mx1_buffer, vb);
|
|
buf->inwork = 0;
|
|
INIT_LIST_HEAD(&buf->vb.queue);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int mx1_camera_poll(struct file *file, poll_table *pt)
|
|
{
|
|
struct soc_camera_file *icf = file->private_data;
|
|
struct mx1_buffer *buf;
|
|
|
|
buf = list_entry(icf->vb_vidq.stream.next, struct mx1_buffer,
|
|
vb.stream);
|
|
|
|
poll_wait(file, &buf->vb.done, pt);
|
|
|
|
if (buf->vb.state == VIDEOBUF_DONE ||
|
|
buf->vb.state == VIDEOBUF_ERROR)
|
|
return POLLIN | POLLRDNORM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mx1_camera_querycap(struct soc_camera_host *ici,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
/* cap->name is set by the friendly caller:-> */
|
|
strlcpy(cap->card, "i.MX1/i.MXL Camera", sizeof(cap->card));
|
|
cap->version = VERSION_CODE;
|
|
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct soc_camera_host_ops mx1_soc_camera_host_ops = {
|
|
.owner = THIS_MODULE,
|
|
.add = mx1_camera_add_device,
|
|
.remove = mx1_camera_remove_device,
|
|
.set_bus_param = mx1_camera_set_bus_param,
|
|
.set_crop = mx1_camera_set_crop,
|
|
.set_fmt = mx1_camera_set_fmt,
|
|
.try_fmt = mx1_camera_try_fmt,
|
|
.init_videobuf = mx1_camera_init_videobuf,
|
|
.reqbufs = mx1_camera_reqbufs,
|
|
.poll = mx1_camera_poll,
|
|
.querycap = mx1_camera_querycap,
|
|
};
|
|
|
|
static struct fiq_handler fh = {
|
|
.name = "csi_sof"
|
|
};
|
|
|
|
static int __init mx1_camera_probe(struct platform_device *pdev)
|
|
{
|
|
struct mx1_camera_dev *pcdev;
|
|
struct resource *res;
|
|
struct pt_regs regs;
|
|
struct clk *clk;
|
|
void __iomem *base;
|
|
unsigned int irq;
|
|
int err = 0;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (!res || !irq) {
|
|
err = -ENODEV;
|
|
goto exit;
|
|
}
|
|
|
|
clk = clk_get(&pdev->dev, "csi_clk");
|
|
if (IS_ERR(clk)) {
|
|
err = PTR_ERR(clk);
|
|
goto exit;
|
|
}
|
|
|
|
pcdev = kzalloc(sizeof(*pcdev), GFP_KERNEL);
|
|
if (!pcdev) {
|
|
dev_err(&pdev->dev, "Could not allocate pcdev\n");
|
|
err = -ENOMEM;
|
|
goto exit_put_clk;
|
|
}
|
|
|
|
pcdev->res = res;
|
|
pcdev->clk = clk;
|
|
|
|
pcdev->pdata = pdev->dev.platform_data;
|
|
|
|
if (pcdev->pdata)
|
|
pcdev->mclk = pcdev->pdata->mclk_10khz * 10000;
|
|
|
|
if (!pcdev->mclk) {
|
|
dev_warn(&pdev->dev,
|
|
"mclk_10khz == 0! Please, fix your platform data. "
|
|
"Using default 20MHz\n");
|
|
pcdev->mclk = 20000000;
|
|
}
|
|
|
|
INIT_LIST_HEAD(&pcdev->capture);
|
|
spin_lock_init(&pcdev->lock);
|
|
|
|
/*
|
|
* Request the regions.
|
|
*/
|
|
if (!request_mem_region(res->start, resource_size(res), DRIVER_NAME)) {
|
|
err = -EBUSY;
|
|
goto exit_kfree;
|
|
}
|
|
|
|
base = ioremap(res->start, resource_size(res));
|
|
if (!base) {
|
|
err = -ENOMEM;
|
|
goto exit_release;
|
|
}
|
|
pcdev->irq = irq;
|
|
pcdev->base = base;
|
|
|
|
/* request dma */
|
|
pcdev->dma_chan = imx_dma_request_by_prio(DRIVER_NAME, DMA_PRIO_HIGH);
|
|
if (pcdev->dma_chan < 0) {
|
|
dev_err(&pdev->dev, "Can't request DMA for MX1 CSI\n");
|
|
err = -EBUSY;
|
|
goto exit_iounmap;
|
|
}
|
|
dev_dbg(&pdev->dev, "got DMA channel %d\n", pcdev->dma_chan);
|
|
|
|
imx_dma_setup_handlers(pcdev->dma_chan, mx1_camera_dma_irq, NULL,
|
|
pcdev);
|
|
|
|
imx_dma_config_channel(pcdev->dma_chan, IMX_DMA_TYPE_FIFO,
|
|
IMX_DMA_MEMSIZE_32, DMA_REQ_CSI_R, 0);
|
|
/* burst length : 16 words = 64 bytes */
|
|
imx_dma_config_burstlen(pcdev->dma_chan, 0);
|
|
|
|
/* request irq */
|
|
err = claim_fiq(&fh);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Camera interrupt register failed \n");
|
|
goto exit_free_dma;
|
|
}
|
|
|
|
set_fiq_handler(&mx1_camera_sof_fiq_start, &mx1_camera_sof_fiq_end -
|
|
&mx1_camera_sof_fiq_start);
|
|
|
|
regs.ARM_r8 = DMA_BASE + DMA_DIMR;
|
|
regs.ARM_r9 = DMA_BASE + DMA_CCR(pcdev->dma_chan);
|
|
regs.ARM_r10 = (long)pcdev->base + CSICR1;
|
|
regs.ARM_fp = (long)pcdev->base + CSISR;
|
|
regs.ARM_sp = 1 << pcdev->dma_chan;
|
|
set_fiq_regs(®s);
|
|
|
|
mxc_set_irq_fiq(irq, 1);
|
|
enable_fiq(irq);
|
|
|
|
pcdev->soc_host.drv_name = DRIVER_NAME;
|
|
pcdev->soc_host.ops = &mx1_soc_camera_host_ops;
|
|
pcdev->soc_host.priv = pcdev;
|
|
pcdev->soc_host.dev = &pdev->dev;
|
|
pcdev->soc_host.nr = pdev->id;
|
|
err = soc_camera_host_register(&pcdev->soc_host);
|
|
if (err)
|
|
goto exit_free_irq;
|
|
|
|
dev_info(&pdev->dev, "MX1 Camera driver loaded\n");
|
|
|
|
return 0;
|
|
|
|
exit_free_irq:
|
|
disable_fiq(irq);
|
|
mxc_set_irq_fiq(irq, 0);
|
|
release_fiq(&fh);
|
|
exit_free_dma:
|
|
imx_dma_free(pcdev->dma_chan);
|
|
exit_iounmap:
|
|
iounmap(base);
|
|
exit_release:
|
|
release_mem_region(res->start, resource_size(res));
|
|
exit_kfree:
|
|
kfree(pcdev);
|
|
exit_put_clk:
|
|
clk_put(clk);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __exit mx1_camera_remove(struct platform_device *pdev)
|
|
{
|
|
struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev);
|
|
struct mx1_camera_dev *pcdev = container_of(soc_host,
|
|
struct mx1_camera_dev, soc_host);
|
|
struct resource *res;
|
|
|
|
imx_dma_free(pcdev->dma_chan);
|
|
disable_fiq(pcdev->irq);
|
|
mxc_set_irq_fiq(pcdev->irq, 0);
|
|
release_fiq(&fh);
|
|
|
|
clk_put(pcdev->clk);
|
|
|
|
soc_camera_host_unregister(soc_host);
|
|
|
|
iounmap(pcdev->base);
|
|
|
|
res = pcdev->res;
|
|
release_mem_region(res->start, resource_size(res));
|
|
|
|
kfree(pcdev);
|
|
|
|
dev_info(&pdev->dev, "MX1 Camera driver unloaded\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mx1_camera_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
},
|
|
.remove = __exit_p(mx1_camera_remove),
|
|
};
|
|
|
|
static int __init mx1_camera_init(void)
|
|
{
|
|
return platform_driver_probe(&mx1_camera_driver, mx1_camera_probe);
|
|
}
|
|
|
|
static void __exit mx1_camera_exit(void)
|
|
{
|
|
return platform_driver_unregister(&mx1_camera_driver);
|
|
}
|
|
|
|
module_init(mx1_camera_init);
|
|
module_exit(mx1_camera_exit);
|
|
|
|
MODULE_DESCRIPTION("i.MX1/i.MXL SoC Camera Host driver");
|
|
MODULE_AUTHOR("Paulius Zaleckas <paulius.zaleckas@teltonika.lt>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|