linux/arch/mips/loongson64/init.c
Huang Pei 822df315cc MIPS: loongson64: set nid for reserved memblock region
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.

This works around booting failure on 3A1000+ since commit 61167ad5fe
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.

Signed-off-by: Huang Pei <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-01-27 11:07:57 +01:00

230 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Lemote Inc.
* Author: Wu Zhangjin, wuzhangjin@gmail.com
*/
#include <linux/irqchip.h>
#include <linux/logic_pio.h>
#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/bootinfo.h>
#include <asm/traps.h>
#include <asm/smp-ops.h>
#include <asm/cacheflush.h>
#include <asm/fw/fw.h>
#include <loongson.h>
#include <boot_param.h>
#define NODE_ID_OFFSET_ADDR ((void __iomem *)TO_UNCAC(0x1001041c))
u32 node_id_offset;
static void __init mips_nmi_setup(void)
{
void *base;
base = (void *)(CAC_BASE + 0x380);
memcpy(base, except_vec_nmi, 0x80);
flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
}
void ls7a_early_config(void)
{
node_id_offset = ((readl(NODE_ID_OFFSET_ADDR) >> 8) & 0x1f) + 36;
}
void rs780e_early_config(void)
{
node_id_offset = 37;
}
void virtual_early_config(void)
{
node_id_offset = 44;
}
void __init szmem(unsigned int node)
{
u32 i, mem_type;
phys_addr_t node_id, mem_start, mem_size;
/* Otherwise come from DTB */
if (loongson_sysconf.fw_interface != LOONGSON_LEFI)
return;
/* Parse memory information and activate */
for (i = 0; i < loongson_memmap->nr_map; i++) {
node_id = loongson_memmap->map[i].node_id;
if (node_id != node)
continue;
mem_type = loongson_memmap->map[i].mem_type;
mem_size = loongson_memmap->map[i].mem_size;
/* Memory size comes in MB if MEM_SIZE_IS_IN_BYTES not set */
if (mem_size & MEM_SIZE_IS_IN_BYTES)
mem_size &= ~MEM_SIZE_IS_IN_BYTES;
else
mem_size = mem_size << 20;
mem_start = (node_id << 44) | loongson_memmap->map[i].mem_start;
switch (mem_type) {
case SYSTEM_RAM_LOW:
case SYSTEM_RAM_HIGH:
case UMA_VIDEO_RAM:
pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes usable\n",
(u32)node_id, mem_type, &mem_start, &mem_size);
memblock_add_node(mem_start, mem_size, node,
MEMBLOCK_NONE);
break;
case SYSTEM_RAM_RESERVED:
case VIDEO_ROM:
case ADAPTER_ROM:
case ACPI_TABLE:
case SMBIOS_TABLE:
pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes reserved\n",
(u32)node_id, mem_type, &mem_start, &mem_size);
memblock_reserve(mem_start, mem_size);
break;
/* We should not reserve VUMA_VIDEO_RAM as it overlaps with MMIO */
case VUMA_VIDEO_RAM:
default:
pr_info("Node %d, mem_type:%d\t[%pa], %pa bytes unhandled\n",
(u32)node_id, mem_type, &mem_start, &mem_size);
break;
}
}
/* Reserve vgabios if it comes from firmware */
if (loongson_sysconf.vgabios_addr)
memblock_reserve(virt_to_phys((void *)loongson_sysconf.vgabios_addr),
SZ_256K);
/* set nid for reserved memory */
memblock_set_node((u64)node << 44, (u64)(node + 1) << 44,
&memblock.reserved, node);
}
#ifndef CONFIG_NUMA
static void __init prom_init_memory(void)
{
szmem(0);
}
#endif
void __init prom_init(void)
{
fw_init_cmdline();
if (fw_arg2 == 0 || (fdt_magic(fw_arg2) == FDT_MAGIC)) {
loongson_sysconf.fw_interface = LOONGSON_DTB;
prom_dtb_init_env();
} else {
loongson_sysconf.fw_interface = LOONGSON_LEFI;
prom_lefi_init_env();
}
/* init base address of io space */
set_io_port_base(PCI_IOBASE);
if (loongson_sysconf.early_config)
loongson_sysconf.early_config();
#ifdef CONFIG_NUMA
prom_init_numa_memory();
#else
prom_init_memory();
#endif
/* Hardcode to CPU UART 0 */
if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R)
setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE), 0, 1024);
else
setup_8250_early_printk_port(TO_UNCAC(LOONGSON_REG_BASE + 0x1e0), 0, 1024);
register_smp_ops(&loongson3_smp_ops);
board_nmi_handler_setup = mips_nmi_setup;
}
static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, resource_size_t hw_start,
resource_size_t size)
{
int ret = 0;
struct logic_pio_hwaddr *range;
unsigned long vaddr;
range = kzalloc(sizeof(*range), GFP_ATOMIC);
if (!range)
return -ENOMEM;
range->fwnode = fwnode;
range->size = size = round_up(size, PAGE_SIZE);
range->hw_start = hw_start;
range->flags = LOGIC_PIO_CPU_MMIO;
ret = logic_pio_register_range(range);
if (ret) {
kfree(range);
return ret;
}
/* Legacy ISA must placed at the start of PCI_IOBASE */
if (range->io_start != 0) {
logic_pio_unregister_range(range);
kfree(range);
return -EINVAL;
}
vaddr = PCI_IOBASE + range->io_start;
ioremap_page_range(vaddr, vaddr + size, hw_start, pgprot_device(PAGE_KERNEL));
return 0;
}
static __init void reserve_pio_range(void)
{
struct device_node *np;
for_each_node_by_name(np, "isa") {
struct of_range range;
struct of_range_parser parser;
pr_info("ISA Bridge: %pOF\n", np);
if (of_range_parser_init(&parser, np)) {
pr_info("Failed to parse resources.\n");
of_node_put(np);
break;
}
for_each_of_range(&parser, &range) {
switch (range.flags & IORESOURCE_TYPE_BITS) {
case IORESOURCE_IO:
pr_info(" IO 0x%016llx..0x%016llx -> 0x%016llx\n",
range.cpu_addr,
range.cpu_addr + range.size - 1,
range.bus_addr);
if (add_legacy_isa_io(&np->fwnode, range.cpu_addr, range.size))
pr_warn("Failed to reserve legacy IO in Logic PIO\n");
break;
case IORESOURCE_MEM:
pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx\n",
range.cpu_addr,
range.cpu_addr + range.size - 1,
range.bus_addr);
break;
}
}
}
}
void __init arch_init_irq(void)
{
reserve_pio_range();
irqchip_init();
}