linux/drivers/usb/musb
Uwe Kleine-König 39cee200c2 usb: musb: core: call init and shutdown for the usb phy
The phy's init routine must be called before it can be used. Do so in
musb_init_controller and the matching shutdown in musb_remove.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22 12:05:44 -06:00
..
am35x.c usb: musb: am35x: fix build warnings 2015-05-27 12:29:57 -05:00
blackfin.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
blackfin.h
cppi_dma.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
cppi_dma.h
da8xx.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
davinci.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
davinci.h usb: musb: davinci: Fix build breakage 2012-06-04 18:29:42 +03:00
jz4740.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
Kconfig usb: musb: USB_TI_CPPI41_DMA requires dmaengine support 2015-11-18 15:09:26 -06:00
Makefile usb: musb: sunxi: Add support for the Allwinner sunxi musb controller 2015-07-29 09:59:20 -05:00
musb_am335x.c usb: musb: Fix panic upon musb_am335x module removal 2014-06-27 10:53:06 -05:00
musb_core.c usb: musb: core: call init and shutdown for the usb phy 2015-12-22 12:05:44 -06:00
musb_core.h usb: musb: core: Fix handling of the phy notifications 2015-12-16 10:07:28 -06:00
musb_cppi41.c usb: musb: fix cppi channel teardown for isoch transfer 2015-09-21 14:42:36 -05:00
musb_debug.h
musb_debugfs.c usb: musb: add softconnect for host mode 2015-05-07 13:49:23 -05:00
musb_dma.h usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
musb_dsps.c usb: common: of_usb_get_dr_mode to usb_get_dr_mode 2015-09-27 10:54:31 -05:00
musb_gadget_ep0.c usb: musb: gadget: use common is_selfpowered 2015-01-29 10:35:43 -06:00
musb_gadget.c usb: musb: gadget: remove redundant condition 2015-12-16 10:07:28 -06:00
musb_gadget.h usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes 2013-05-28 19:22:23 +03:00
musb_host.c usb: musb: fix tx fifo flush handling 2015-11-17 11:35:48 -06:00
musb_host.h usb: musb: fix prototype for musb_port_reset 2013-12-20 15:05:43 -06:00
musb_io.h usb: musb: Make busctl_offset an io-op rather then a define 2015-05-26 10:46:54 -05:00
musb_regs.h usb: musb: Make busctl_offset an io-op rather then a define 2015-05-26 10:46:54 -05:00
musb_virthub.c usb: musb: host: rely on port_mode to call musb_start() 2015-07-06 12:34:07 -05:00
musbhsdma.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
musbhsdma.h usb: musb: remove generic_interrupt 2012-11-06 15:32:13 +02:00
omap2430.c usb: musb: Fix unbalanced pm_runtime_enable 2015-12-16 10:07:28 -06:00
omap2430.h usb: start using the control module driver 2013-01-25 12:27:24 +02:00
sunxi.c musb: sunxi: Make sunxi musb glue work without MUSB_PIO_ONLY 2015-10-09 16:35:00 -05:00
tusb6010_omap.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
tusb6010.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
tusb6010.h usb: musb: Fix up DMA related macros 2015-05-07 13:35:46 -05:00
ux500_dma.c usb: musb: Set up function pointers for DMA 2015-05-07 13:35:51 -05:00
ux500.c usb: musb: ux500: Fix module autoload for OF platform driver 2015-09-14 10:14:54 -05:00