korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-15 00:04:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
6abf467826
linux/drivers/ata/ahci.c
Erik Inge Bolsø 14bdef982c [libata] convert drivers to use ata.h mode mask defines 
No functional changes in this patch.

Signed-off-by: Erik Inge Bolsø <knan-lkml@anduin.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-24 22:13:27 -04:00

2776 lines
76 KiB
C
Raw Blame History

/*
* ahci.c - AHCI SATA support
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2004-2005 Red Hat, Inc.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* AHCI hardware documentation:
* http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
* http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <linux/dmi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#define DRV_NAME "ahci"
#define DRV_VERSION "3.0"
/* Enclosure Management Control */
#define EM_CTRL_MSG_TYPE 0x000f0000
/* Enclosure Management LED Message Type */
#define EM_MSG_LED_HBA_PORT 0x0000000f
#define EM_MSG_LED_PMP_SLOT 0x0000ff00
#define EM_MSG_LED_VALUE 0xffff0000
#define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
#define EM_MSG_LED_VALUE_OFF 0xfff80000
#define EM_MSG_LED_VALUE_ON 0x00010000
static int ahci_skip_host_reset;
static int ahci_ignore_sss;
module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy);
static void ahci_disable_alpm(struct ata_port *ap);
static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
size_t size);
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
ssize_t size);
#define MAX_SLOTS 8
enum {
AHCI_PCI_BAR = 5,
AHCI_MAX_PORTS = 32,
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
AHCI_CMD_SZ = 32,
AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
AHCI_RX_FIS_SZ = 256,
AHCI_CMD_TBL_CDB = 0x40,
AHCI_CMD_TBL_HDR_SZ = 0x80,
AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
AHCI_RX_FIS_SZ,
AHCI_IRQ_ON_SG = (1 << 31),
AHCI_CMD_ATAPI = (1 << 5),
AHCI_CMD_WRITE = (1 << 6),
AHCI_CMD_PREFETCH = (1 << 7),
AHCI_CMD_RESET = (1 << 8),
AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
board_ahci = 0,
board_ahci_vt8251 = 1,
board_ahci_ign_iferr = 2,
board_ahci_sb600 = 3,
board_ahci_mv = 4,
board_ahci_sb700 = 5, /* for SB700 and SB800 */
board_ahci_mcp65 = 6,
board_ahci_nopmp = 7,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
HOST_CTL = 0x04, /* global host control */
HOST_IRQ_STAT = 0x08, /* interrupt status */
HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
HOST_EM_LOC = 0x1c, /* Enclosure Management location */
HOST_EM_CTL = 0x20, /* Enclosure Management Control */
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
/* HOST_CAP bits */
HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
PORT_IRQ_STAT = 0x10, /* interrupt status */
PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
PORT_CMD = 0x18, /* port command */
PORT_TFDATA = 0x20, /* taskfile data */
PORT_SIG = 0x24, /* device TF signature */
PORT_CMD_ISSUE = 0x38, /* command issue */
PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
/* PORT_IRQ_{STAT,MASK} bits */
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
PORT_IRQ_IF_ERR |
PORT_IRQ_CONNECT |
PORT_IRQ_PHYRDY |
PORT_IRQ_UNK_FIS |
PORT_IRQ_BAD_PMP,
PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
PORT_IRQ_TF_ERR |
PORT_IRQ_HBUS_DATA_ERR,
DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
/* PORT_CMD bits */
PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
PORT_CMD_PMP = (1 << 17), /* PMP attached */
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
PORT_CMD_CLO = (1 << 3), /* Command list override */
PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
/* hpriv->flags bits */
AHCI_HFLAG_NO_NCQ = (1 << 0),
AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
/* ap->flags bits */
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
ATA_FLAG_IPM,
ICH_MAP = 0x90, /* ICH MAP register */
/* em_ctl bits */
EM_CTL_RST = (1 << 9), /* Reset */
EM_CTL_TM = (1 << 8), /* Transmit Message */
EM_CTL_ALHD = (1 << 26), /* Activity LED */
};
struct ahci_cmd_hdr {
__le32 opts;
__le32 status;
__le32 tbl_addr;
__le32 tbl_addr_hi;
__le32 reserved[4];
};
struct ahci_sg {
__le32 addr;
__le32 addr_hi;
__le32 reserved;
__le32 flags_size;
};
struct ahci_em_priv {
enum sw_activity blink_policy;
struct timer_list timer;
unsigned long saved_activity;
unsigned long activity;
unsigned long led_state;
};
struct ahci_host_priv {
unsigned int flags; /* AHCI_HFLAG_* */
u32 cap; /* cap to use */
u32 port_map; /* port map to use */
u32 saved_cap; /* saved initial cap */
u32 saved_port_map; /* saved initial port_map */
u32 em_loc; /* enclosure management location */
};
struct ahci_port_priv {
struct ata_link *active_link;
struct ahci_cmd_hdr *cmd_slot;
dma_addr_t cmd_slot_dma;
void *cmd_tbl;
dma_addr_t cmd_tbl_dma;
void *rx_fis;
dma_addr_t rx_fis_dma;
/* for NCQ spurious interrupt analysis */
unsigned int ncq_saw_d2h:1;
unsigned int ncq_saw_dmas:1;
unsigned int ncq_saw_sdb:1;
u32 intr_mask; /* interrupts to enable */
struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info
* per PM slot */
};
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static void ahci_freeze(struct ata_port *ap);
static void ahci_thaw(struct ata_port *ap);
static void ahci_pmp_attach(struct ata_port *ap);
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static void ahci_postreset(struct ata_link *link, unsigned int *class);
static void ahci_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static int ahci_port_resume(struct ata_port *ap);
static void ahci_dev_config(struct ata_device *dev);
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts);
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
static ssize_t ahci_activity_store(struct ata_device *dev,
enum sw_activity val);
static void ahci_init_sw_activity(struct ata_link *link);
static struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_link_power_management_policy,
&dev_attr_em_message_type,
&dev_attr_em_message,
NULL
};
static struct device_attribute *ahci_sdev_attrs[] = {
&dev_attr_sw_activity,
&dev_attr_unload_heads,
NULL
};
static struct scsi_host_template ahci_sht = {
ATA_NCQ_SHT(DRV_NAME),
.can_queue = AHCI_MAX_CMDS - 1,
.sg_tablesize = AHCI_MAX_SG,
.dma_boundary = AHCI_DMA_BOUNDARY,
.shost_attrs = ahci_shost_attrs,
.sdev_attrs = ahci_sdev_attrs,
};
static struct ata_port_operations ahci_ops = {
.inherits = &sata_pmp_port_ops,
.qc_defer = sata_pmp_qc_defer_cmd_switch,
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
.qc_fill_rtf = ahci_qc_fill_rtf,
.freeze = ahci_freeze,
.thaw = ahci_thaw,
.softreset = ahci_softreset,
.hardreset = ahci_hardreset,
.postreset = ahci_postreset,
.pmp_softreset = ahci_softreset,
.error_handler = ahci_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
.dev_config = ahci_dev_config,
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
.pmp_attach = ahci_pmp_attach,
.pmp_detach = ahci_pmp_detach,
.enable_pm = ahci_enable_alpm,
.disable_pm = ahci_disable_alpm,
.em_show = ahci_led_show,
.em_store = ahci_led_store,
.sw_activity_show = ahci_activity_show,
.sw_activity_store = ahci_activity_store,
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
#endif
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
static struct ata_port_operations ahci_vt8251_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_vt8251_hardreset,
};
static struct ata_port_operations ahci_p5wdh_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_p5wdh_hardreset,
};
static struct ata_port_operations ahci_sb600_ops = {
.inherits = &ahci_ops,
.softreset = ahci_sb600_softreset,
.pmp_softreset = ahci_sb600_softreset,
};
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
static const struct ata_port_info ahci_port_info[] = {
/* board_ahci */
{
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_vt8251 */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_vt8251_ops,
},
/* board_ahci_ign_iferr */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_sb600 */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
AHCI_HFLAG_SECT255),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_sb600_ops,
},
/* board_ahci_mv */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_sb700, for SB700 and SB800 */
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_sb600_ops,
},
/* board_ahci_mcp65 */
{
AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
/* board_ahci_nopmp */
{
AHCI_HFLAGS (AHCI_HFLAG_NO_PMP),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
};
static const struct pci_device_id ahci_pci_tbl[] = {
/* Intel */
{ PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
{ PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
{ PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
{ PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
{ PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
{ PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
{ PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
{ PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
{ PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
{ PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb700 }, /* ATI SB700/800 */
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
/* VIA */
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
/* NVIDIA */
{ PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
{ PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
{ PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */
{ PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
{ PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */
{ PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
/* Marvell */
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */
/* Promise */
{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */
/* Generic, PCI class code for AHCI */
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
{ } /* terminate list */
};
static struct pci_driver ahci_pci_driver = {
.name = DRV_NAME,
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ahci_pci_device_suspend,
.resume = ahci_pci_device_resume,
#endif
};
static int ahci_em_messages = 1;
module_param(ahci_em_messages, int, 0444);
/* add other LED protocol types when they become supported */
MODULE_PARM_DESC(ahci_em_messages,
"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
static int marvell_enable;
#else
static int marvell_enable = 1;
#endif
module_param(marvell_enable, int, 0644);
MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
static inline int ahci_nr_ports(u32 cap)
{
return (cap & 0x1f) + 1;
}
static inline void __iomem *__ahci_port_base(struct ata_host *host,
unsigned int port_no)
{
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
return mmio + 0x100 + (port_no * 0x80);
}
static inline void __iomem *ahci_port_base(struct ata_port *ap)
{
return __ahci_port_base(ap->host, ap->port_no);
}
static void ahci_enable_ahci(void __iomem *mmio)
{
int i;
u32 tmp;
/* turn on AHCI_EN */
tmp = readl(mmio + HOST_CTL);
if (tmp & HOST_AHCI_EN)
return;
/* Some controllers need AHCI_EN to be written multiple times.
* Try a few times before giving up.
*/
for (i = 0; i < 5; i++) {
tmp |= HOST_AHCI_EN;
writel(tmp, mmio + HOST_CTL);
tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
if (tmp & HOST_AHCI_EN)
return;
msleep(10);
}
WARN_ON(1);
}
/**
* ahci_save_initial_config - Save and fixup initial config values
* @pdev: target PCI device
* @hpriv: host private area to store config values
*
* Some registers containing configuration info might be setup by
* BIOS and might be cleared on reset. This function saves the
* initial values of those registers into @hpriv such that they
* can be restored after controller reset.
*
* If inconsistent, config values are fixed up by this function.
*
* LOCKING:
* None.
*/
static void ahci_save_initial_config(struct pci_dev *pdev,
struct ahci_host_priv *hpriv)
{
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
u32 cap, port_map;
int i;
int mv;
/* make sure AHCI mode is enabled before accessing CAP */
ahci_enable_ahci(mmio);
/* Values prefixed with saved_ are written back to host after
* reset. Values without are used for driver operation.
*/
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
/* some chips have errata preventing 64bit use */
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do 64bit DMA, forcing 32bit\n");
cap &= ~HOST_CAP_64;
}
if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do NCQ, turning off CAP_NCQ\n");
cap &= ~HOST_CAP_NCQ;
}
if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can do NCQ, turning on CAP_NCQ\n");
cap |= HOST_CAP_NCQ;
}
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
cap &= ~HOST_CAP_PMP;
}
if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 &&
port_map != 1) {
dev_printk(KERN_INFO, &pdev->dev,
"JMB361 has only one port, port_map 0x%x -> 0x%x\n",
port_map, 1);
port_map = 1;
}
/*
* Temporary Marvell 6145 hack: PATA port presence
* is asserted through the standard AHCI port
* presence register, as bit 4 (counting from 0)
*/
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
if (pdev->device == 0x6121)
mv = 0x3;
else
mv = 0xf;
dev_printk(KERN_ERR, &pdev->dev,
"MV_AHCI HACK: port_map %x -> %x\n",
port_map,
port_map & mv);
dev_printk(KERN_ERR, &pdev->dev,
"Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
port_map &= mv;
}
/* cross check port_map and cap.n_ports */
if (port_map) {
int map_ports = 0;
for (i = 0; i < AHCI_MAX_PORTS; i++)
if (port_map & (1 << i))
map_ports++;
/* If PI has more ports than n_ports, whine, clear
* port_map and let it be generated from n_ports.
*/
if (map_ports > ahci_nr_ports(cap)) {
dev_printk(KERN_WARNING, &pdev->dev,
"implemented port map (0x%x) contains more "
"ports than nr_ports (%u), using nr_ports\n",
port_map, ahci_nr_ports(cap));
port_map = 0;
}
}
/* fabricate port_map from cap.nr_ports */
if (!port_map) {
port_map = (1 << ahci_nr_ports(cap)) - 1;
dev_printk(KERN_WARNING, &pdev->dev,
"forcing PORTS_IMPL to 0x%x\n", port_map);
/* write the fixed up value to the PI register */
hpriv->saved_port_map = port_map;
}
/* record values to use during operation */
hpriv->cap = cap;
hpriv->port_map = port_map;
}
/**
* ahci_restore_initial_config - Restore initial config
* @host: target ATA host
*
* Restore initial config stored by ahci_save_initial_config().
*
* LOCKING:
* None.
*/
static void ahci_restore_initial_config(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
writel(hpriv->saved_cap, mmio + HOST_CAP);
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
}
static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
{
static const int offset[] = {
[SCR_STATUS] = PORT_SCR_STAT,
[SCR_CONTROL] = PORT_SCR_CTL,
[SCR_ERROR] = PORT_SCR_ERR,
[SCR_ACTIVE] = PORT_SCR_ACT,
[SCR_NOTIFICATION] = PORT_SCR_NTF,
};
struct ahci_host_priv *hpriv = ap->host->private_data;
if (sc_reg < ARRAY_SIZE(offset) &&
(sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
return offset[sc_reg];
return 0;
}
static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
int offset = ahci_scr_offset(link->ap, sc_reg);
if (offset) {
*val = readl(port_mmio + offset);
return 0;
}
return -EINVAL;
}
static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
int offset = ahci_scr_offset(link->ap, sc_reg);
if (offset) {
writel(val, port_mmio + offset);
return 0;
}
return -EINVAL;
}
static void ahci_start_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
/* start DMA */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
}
static int ahci_stop_engine(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
tmp = readl(port_mmio + PORT_CMD);
/* check if the HBA is idle */
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
return 0;
/* setting HBA to idle */
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
/* wait for engine to stop. This could be as long as 500 msec */
tmp = ata_wait_register(port_mmio + PORT_CMD,
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
if (tmp & PORT_CMD_LIST_ON)
return -EIO;
return 0;
}
static void ahci_start_fis_rx(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
u32 tmp;
/* set FIS registers */
if (hpriv->cap & HOST_CAP_64)
writel((pp->cmd_slot_dma >> 16) >> 16,
port_mmio + PORT_LST_ADDR_HI);
writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
if (hpriv->cap & HOST_CAP_64)
writel((pp->rx_fis_dma >> 16) >> 16,
port_mmio + PORT_FIS_ADDR_HI);
writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
/* enable FIS reception */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_FIS_RX;
writel(tmp, port_mmio + PORT_CMD);
/* flush */
readl(port_mmio + PORT_CMD);
}
static int ahci_stop_fis_rx(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
/* disable FIS reception */
tmp = readl(port_mmio + PORT_CMD);
tmp &= ~PORT_CMD_FIS_RX;
writel(tmp, port_mmio + PORT_CMD);
/* wait for completion, spec says 500ms, give it 1000 */
tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
PORT_CMD_FIS_ON, 10, 1000);
if (tmp & PORT_CMD_FIS_ON)
return -EBUSY;
return 0;
}
static void ahci_power_up(struct ata_port *ap)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 cmd;
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
/* spin up device */
if (hpriv->cap & HOST_CAP_SSS) {
cmd |= PORT_CMD_SPIN_UP;
writel(cmd, port_mmio + PORT_CMD);
}
/* wake up link */
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
static void ahci_disable_alpm(struct ata_port *ap)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 cmd;
struct ahci_port_priv *pp = ap->private_data;
/* IPM bits should be disabled by libata-core */
/* get the existing command bits */
cmd = readl(port_mmio + PORT_CMD);
/* disable ALPM and ASP */
cmd &= ~PORT_CMD_ASP;
cmd &= ~PORT_CMD_ALPE;
/* force the interface back to active */
cmd |= PORT_CMD_ICC_ACTIVE;
/* write out new cmd value */
writel(cmd, port_mmio + PORT_CMD);
cmd = readl(port_mmio + PORT_CMD);
/* wait 10ms to be sure we've come out of any low power state */
msleep(10);
/* clear out any PhyRdy stuff from interrupt status */
writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
/* go ahead and clean out PhyRdy Change from Serror too */
ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
/*
* Clear flag to indicate that we should ignore all PhyRdy
* state changes
*/
hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
/*
* Enable interrupts on Phy Ready.
*/
pp->intr_mask |= PORT_IRQ_PHYRDY;
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
/*
* don't change the link pm policy - we can be called
* just to turn of link pm temporarily
*/
}
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 cmd;
struct ahci_port_priv *pp = ap->private_data;
u32 asp;
/* Make sure the host is capable of link power management */
if (!(hpriv->cap & HOST_CAP_ALPM))
return -EINVAL;
switch (policy) {
case MAX_PERFORMANCE:
case NOT_AVAILABLE:
/*
* if we came here with NOT_AVAILABLE,
* it just means this is the first time we
* have tried to enable - default to max performance,
* and let the user go to lower power modes on request.
*/
ahci_disable_alpm(ap);
return 0;
case MIN_POWER:
/* configure HBA to enter SLUMBER */
asp = PORT_CMD_ASP;
break;
case MEDIUM_POWER:
/* configure HBA to enter PARTIAL */
asp = 0;
break;
default:
return -EINVAL;
}
/*
* Disable interrupts on Phy Ready. This keeps us from
* getting woken up due to spurious phy ready interrupts
* TBD - Hot plug should be done via polling now, is
* that even supported?
*/
pp->intr_mask &= ~PORT_IRQ_PHYRDY;
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
/*
* Set a flag to indicate that we should ignore all PhyRdy
* state changes since these can happen now whenever we
* change link state
*/
hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
/* get the existing command bits */
cmd = readl(port_mmio + PORT_CMD);
/*
* Set ASP based on Policy
*/
cmd |= asp;
/*
* Setting this bit will instruct the HBA to aggressively
* enter a lower power link state when it's appropriate and
* based on the value set above for ASP
*/
cmd |= PORT_CMD_ALPE;
/* write out new cmd value */
writel(cmd, port_mmio + PORT_CMD);
cmd = readl(port_mmio + PORT_CMD);
/* IPM bits should be set by libata-core */
return 0;
}
#ifdef CONFIG_PM
static void ahci_power_down(struct ata_port *ap)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 cmd, scontrol;
if (!(hpriv->cap & HOST_CAP_SSS))
return;
/* put device into listen mode, first set PxSCTL.DET to 0 */
scontrol = readl(port_mmio + PORT_SCR_CTL);
scontrol &= ~0xf;
writel(scontrol, port_mmio + PORT_SCR_CTL);
/* then set PxCMD.SUD to 0 */
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
cmd &= ~PORT_CMD_SPIN_UP;
writel(cmd, port_mmio + PORT_CMD);
}
#endif
static void ahci_start_port(struct ata_port *ap)
{
struct ahci_port_priv *pp = ap->private_data;
struct ata_link *link;
struct ahci_em_priv *emp;
/* enable FIS reception */
ahci_start_fis_rx(ap);
/* enable DMA */
ahci_start_engine(ap);
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
ata_for_each_link(link, ap, EDGE) {
emp = &pp->em_priv[link->pmp];
ahci_transmit_led_message(ap, emp->led_state, 4);
}
}
if (ap->flags & ATA_FLAG_SW_ACTIVITY)
ata_for_each_link(link, ap, EDGE)
ahci_init_sw_activity(link);
}
static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
{
int rc;
/* disable DMA */
rc = ahci_stop_engine(ap);
if (rc) {
*emsg = "failed to stop engine";
return rc;
}
/* disable FIS reception */
rc = ahci_stop_fis_rx(ap);
if (rc) {
*emsg = "failed stop FIS RX";
return rc;
}
return 0;
}
static int ahci_reset_controller(struct ata_host *host)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 tmp;
/* we must be in AHCI mode, before using anything
* AHCI-specific, such as HOST_RESET.
*/
ahci_enable_ahci(mmio);
/* global controller reset */
if (!ahci_skip_host_reset) {
tmp = readl(mmio + HOST_CTL);
if ((tmp & HOST_RESET) == 0) {
writel(tmp | HOST_RESET, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
}
/*
* to perform host reset, OS should set HOST_RESET
* and poll until this bit is read to be "0".
* reset must complete within 1 second, or
* the hardware should be considered fried.
*/
tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
HOST_RESET, 10, 1000);
if (tmp & HOST_RESET) {
dev_printk(KERN_ERR, host->dev,
"controller reset failed (0x%x)\n", tmp);
return -EIO;
}
/* turn on AHCI mode */
ahci_enable_ahci(mmio);
/* Some registers might be cleared on reset. Restore
* initial values.
*/
ahci_restore_initial_config(host);
} else
dev_printk(KERN_INFO, host->dev,
"skipping global host reset\n");
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
u16 tmp16;
/* configure PCS */
pci_read_config_word(pdev, 0x92, &tmp16);
if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
tmp16 |= hpriv->port_map;
pci_write_config_word(pdev, 0x92, tmp16);
}
}
return 0;
}
static void ahci_sw_activity(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
return;
emp->activity++;
if (!timer_pending(&emp->timer))
mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
}
static void ahci_sw_activity_blink(unsigned long arg)
{
struct ata_link *link = (struct ata_link *)arg;
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
unsigned long led_message = emp->led_state;
u32 activity_led_state;
unsigned long flags;
led_message &= EM_MSG_LED_VALUE;
led_message |= ap->port_no | (link->pmp << 8);
/* check to see if we've had activity. If so,
* toggle state of LED and reset timer. If not,
* turn LED to desired idle state.
*/
spin_lock_irqsave(ap->lock, flags);
if (emp->saved_activity != emp->activity) {
emp->saved_activity = emp->activity;
/* get the current LED state */
activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
if (activity_led_state)
activity_led_state = 0;
else
activity_led_state = 1;
/* clear old state */
led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
/* toggle state */
led_message |= (activity_led_state << 16);
mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
} else {
/* switch to idle */
led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
if (emp->blink_policy == BLINK_OFF)
led_message |= (1 << 16);
}
spin_unlock_irqrestore(ap->lock, flags);
ahci_transmit_led_message(ap, led_message, 4);
}
static void ahci_init_sw_activity(struct ata_link *link)
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
/* init activity stats, setup timer */
emp->saved_activity = emp->activity = 0;
setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
/* check our blink policy and set flag for link if it's enabled */
if (emp->blink_policy)
link->flags |= ATA_LFLAG_SW_ACTIVITY;
}
static int ahci_reset_em(struct ata_host *host)
{
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 em_ctl;
em_ctl = readl(mmio + HOST_EM_CTL);
if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
return -EINVAL;
writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
return 0;
}
static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
ssize_t size)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
u32 em_ctl;
u32 message[] = {0, 0};
unsigned long flags;
int pmp;
struct ahci_em_priv *emp;
/* get the slot number from the message */
pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
if (pmp < MAX_SLOTS)
emp = &pp->em_priv[pmp];
else
return -EINVAL;
spin_lock_irqsave(ap->lock, flags);
/*
* if we are still busy transmitting a previous message,
* do not allow
*/
em_ctl = readl(mmio + HOST_EM_CTL);
if (em_ctl & EM_CTL_TM) {
spin_unlock_irqrestore(ap->lock, flags);
return -EINVAL;
}
/*
* create message header - this is all zero except for
* the message size, which is 4 bytes.
*/
message[0] |= (4 << 8);
/* ignore 0:4 of byte zero, fill in port info yourself */
message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
/* write message to EM_LOC */
writel(message[0], mmio + hpriv->em_loc);
writel(message[1], mmio + hpriv->em_loc+4);
/* save off new led state for port/slot */
emp->led_state = message[1];
/*
* tell hardware to transmit the message
*/
writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
spin_unlock_irqrestore(ap->lock, flags);
return size;
}
static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
{
struct ahci_port_priv *pp = ap->private_data;
struct ata_link *link;
struct ahci_em_priv *emp;
int rc = 0;
ata_for_each_link(link, ap, EDGE) {
emp = &pp->em_priv[link->pmp];
rc += sprintf(buf, "%lx\n", emp->led_state);
}
return rc;
}
static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
size_t size)
{
int state;
int pmp;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp;
state = simple_strtoul(buf, NULL, 0);
/* get the slot number from the message */
pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
if (pmp < MAX_SLOTS)
emp = &pp->em_priv[pmp];
else
return -EINVAL;
/* mask off the activity bits if we are in sw_activity
* mode, user should turn off sw_activity before setting
* activity led through em_message
*/
if (emp->blink_policy)
state &= ~EM_MSG_LED_VALUE_ACTIVITY;
return ahci_transmit_led_message(ap, state, size);
}
static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
{
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
u32 port_led_state = emp->led_state;
/* save the desired Activity LED behavior */
if (val == OFF) {
/* clear LFLAG */
link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
/* set the LED to OFF */
port_led_state &= EM_MSG_LED_VALUE_OFF;
port_led_state |= (ap->port_no | (link->pmp << 8));
ahci_transmit_led_message(ap, port_led_state, 4);
} else {
link->flags |= ATA_LFLAG_SW_ACTIVITY;
if (val == BLINK_OFF) {
/* set LED to ON for idle */
port_led_state &= EM_MSG_LED_VALUE_OFF;
port_led_state |= (ap->port_no | (link->pmp << 8));
port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
ahci_transmit_led_message(ap, port_led_state, 4);
}
}
emp->blink_policy = val;
return 0;
}
static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
{
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
/* display the saved value of activity behavior for this
* disk.
*/
return sprintf(buf, "%d\n", emp->blink_policy);
}
static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
int port_no, void __iomem *mmio,
void __iomem *port_mmio)
{
const char *emsg = NULL;
int rc;
u32 tmp;
/* make sure port is not active */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
dev_printk(KERN_WARNING, &pdev->dev,
"%s (%d)\n", emsg, rc);
/* clear SError */
tmp = readl(port_mmio + PORT_SCR_ERR);
VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
writel(tmp, port_mmio + PORT_SCR_ERR);
/* clear port IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
writel(1 << port_no, mmio + HOST_IRQ_STAT);
}
static void ahci_init_controller(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
int i;
void __iomem *port_mmio;
u32 tmp;
int mv;
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
if (pdev->device == 0x6121)
mv = 2;
else
mv = 4;
port_mmio = __ahci_port_base(host, mv);
writel(0, port_mmio + PORT_IRQ_MASK);
/* clear port IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
if (tmp)
writel(tmp, port_mmio + PORT_IRQ_STAT);
}
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
port_mmio = ahci_port_base(ap);
if (ata_port_is_dummy(ap))
continue;
ahci_port_init(pdev, ap, i, mmio, port_mmio);
}
tmp = readl(mmio + HOST_CTL);
VPRINTK("HOST_CTL 0x%x\n", tmp);
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
tmp = readl(mmio + HOST_CTL);
VPRINTK("HOST_CTL 0x%x\n", tmp);
}
static void ahci_dev_config(struct ata_device *dev)
{
struct ahci_host_priv *hpriv = dev->link->ap->host->private_data;
if (hpriv->flags & AHCI_HFLAG_SECT255) {
dev->max_sectors = 255;
ata_dev_printk(dev, KERN_INFO,
"SB600 AHCI: limiting to 255 sectors per cmd\n");
}
}
static unsigned int ahci_dev_classify(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_taskfile tf;
u32 tmp;
tmp = readl(port_mmio + PORT_SIG);
tf.lbah = (tmp >> 24) & 0xff;
tf.lbam = (tmp >> 16) & 0xff;
tf.lbal = (tmp >> 8) & 0xff;
tf.nsect = (tmp) & 0xff;
return ata_dev_classify(&tf);
}
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
u32 opts)
{
dma_addr_t cmd_tbl_dma;
cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
pp->cmd_slot[tag].opts = cpu_to_le32(opts);
pp->cmd_slot[tag].status = 0;
pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
}
static int ahci_kick_engine(struct ata_port *ap, int force_restart)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_host_priv *hpriv = ap->host->private_data;
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
u32 tmp;
int busy, rc;
/* do we need to kick the port? */
busy = status & (ATA_BUSY | ATA_DRQ);
if (!busy && !force_restart)
return 0;
/* stop engine */
rc = ahci_stop_engine(ap);
if (rc)
goto out_restart;
/* need to do CLO? */
if (!busy) {
rc = 0;
goto out_restart;
}
if (!(hpriv->cap & HOST_CAP_CLO)) {
rc = -EOPNOTSUPP;
goto out_restart;
}
/* perform CLO */
tmp = readl(port_mmio + PORT_CMD);
tmp |= PORT_CMD_CLO;
writel(tmp, port_mmio + PORT_CMD);
rc = 0;
tmp = ata_wait_register(port_mmio + PORT_CMD,
PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
if (tmp & PORT_CMD_CLO)
rc = -EIO;
/* restart engine */
out_restart:
ahci_start_engine(ap);
return rc;
}
static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
struct ata_taskfile *tf, int is_cmd, u16 flags,
unsigned long timeout_msec)
{
const u32 cmd_fis_len = 5; /* five dwords */
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u8 *fis = pp->cmd_tbl;
u32 tmp;
/* prep the command */
ata_tf_to_fis(tf, pmp, is_cmd, fis);
ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
/* issue & wait */
writel(1, port_mmio + PORT_CMD_ISSUE);
if (timeout_msec) {
tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
1, timeout_msec);
if (tmp & 0x1) {
ahci_kick_engine(ap, 1);
return -EBUSY;
}
} else
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
return 0;
}
static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
int pmp, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
int rc;
DPRINTK("ENTER\n");
/* prepare for SRST (AHCI-1.1 10.4.1) */
rc = ahci_kick_engine(ap, 1);
if (rc && rc != -EOPNOTSUPP)
ata_link_printk(link, KERN_WARNING,
"failed to reset engine (errno=%d)\n", rc);
ata_tf_init(link->device, &tf);
/* issue the first D2H Register FIS */
msecs = 0;
now = jiffies;
if (time_after(now, deadline))
msecs = jiffies_to_msecs(deadline - now);
tf.ctl |= ATA_SRST;
if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
rc = -EIO;
reason = "1st FIS failed";
goto fail;
}
/* spec says at least 5us, but be generous and sleep for 1ms */
msleep(1);
/* issue the second D2H Register FIS */
tf.ctl &= ~ATA_SRST;
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
/* wait for link to become ready */
rc = ata_wait_after_reset(link, deadline, check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
goto fail;
}
*class = ahci_dev_classify(ap);
DPRINTK("EXIT, class=%u\n", *class);
return 0;
fail:
ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
return rc;
}
static int ahci_check_ready(struct ata_link *link)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
return ata_check_ready(status);
}
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
int pmp = sata_srst_pmp(link);
DPRINTK("ENTER\n");
return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
}
static int ahci_sb600_check_ready(struct ata_link *link)
{
void __iomem *port_mmio = ahci_port_base(link->ap);
u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
/*
* There is no need to check TFDATA if BAD PMP is found due to HW bug,
* which can save timeout delay.
*/
if (irq_status & PORT_IRQ_BAD_PMP)
return -EIO;
return ata_check_ready(status);
}
static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
void __iomem *port_mmio = ahci_port_base(ap);
int pmp = sata_srst_pmp(link);
int rc;
u32 irq_sts;
DPRINTK("ENTER\n");
rc = ahci_do_softreset(link, class, pmp, deadline,
ahci_sb600_check_ready);
/*
* Soft reset fails on some ATI chips with IPMS set when PMP
* is enabled but SATA HDD/ODD is connected to SATA port,
* do soft reset again to port 0.
*/
if (rc == -EIO) {
irq_sts = readl(port_mmio + PORT_IRQ_STAT);
if (irq_sts & PORT_IRQ_BAD_PMP) {
ata_link_printk(link, KERN_WARNING,
"failed due to HW bug, retry pmp=0\n");
rc = ahci_do_softreset(link, class, 0, deadline,
ahci_check_ready);
}
}
return rc;
}
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
int rc;
DPRINTK("ENTER\n");
ahci_stop_engine(ap);
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
tf.command = 0x80;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
ahci_start_engine(ap);
if (online)
*class = ahci_dev_classify(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
return rc;
}
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
bool online;
int rc;
DPRINTK("ENTER\n");
ahci_stop_engine(ap);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
ahci_start_engine(ap);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
/* vt8251 doesn't clear BSY on signature FIS reception,
* request follow-up softreset.
*/
return online ? -EAGAIN : rc;
}
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
int rc;
ahci_stop_engine(ap);
/* clear D2H reception area to properly wait for D2H FIS */
ata_tf_init(link->device, &tf);
tf.command = 0x80;
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
ahci_start_engine(ap);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
* hardreset if no device is attached to the first downstream
* port && the pseudo device locks up on SRST w/ PMP==0. To
* work around this, wait for !BSY only briefly. If BSY isn't
* cleared, perform CLO and proceed to IDENTIFY (achieved by
* ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
*
* Wait for two seconds. Devices attached to downstream port
* which can't process the following IDENTIFY after this will
* have to be reset again. For most cases, this should
* suffice while making probing snappish enough.
*/
if (online) {
rc = ata_wait_after_reset(link, jiffies + 2 * HZ,
ahci_check_ready);
if (rc)
ahci_kick_engine(ap, 0);
}
return rc;
}
static void ahci_postreset(struct ata_link *link, unsigned int *class)
{
struct ata_port *ap = link->ap;
void __iomem *port_mmio = ahci_port_base(ap);
u32 new_tmp, tmp;
ata_std_postreset(link, class);
/* Make sure port's ATAPI bit is set appropriately */
new_tmp = tmp = readl(port_mmio + PORT_CMD);
if (*class == ATA_DEV_ATAPI)
new_tmp |= PORT_CMD_ATAPI;
else
new_tmp &= ~PORT_CMD_ATAPI;
if (new_tmp != tmp) {
writel(new_tmp, port_mmio + PORT_CMD);
readl(port_mmio + PORT_CMD); /* flush */
}
}
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
{
struct scatterlist *sg;
struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
unsigned int si;
VPRINTK("ENTER\n");
/*
* Next, the S/G list.
*/
for_each_sg(qc->sg, sg, qc->n_elem, si) {
dma_addr_t addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
}
return si;
}
static void ahci_qc_prep(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ahci_port_priv *pp = ap->private_data;
int is_atapi = ata_is_atapi(qc->tf.protocol);
void *cmd_tbl;
u32 opts;
const u32 cmd_fis_len = 5; /* five dwords */
unsigned int n_elem;
/*
* Fill in command table information. First, the header,
* a SATA Register - Host to Device command FIS.
*/
cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
if (is_atapi) {
memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
}
n_elem = 0;
if (qc->flags & ATA_QCFLAG_DMAMAP)
n_elem = ahci_fill_sg(qc, cmd_tbl);
/*
* Fill in command slot information.
*/
opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
if (qc->tf.flags & ATA_TFLAG_WRITE)
opts |= AHCI_CMD_WRITE;
if (is_atapi)
opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
ahci_fill_cmd_slot(pp, qc->tag, opts);
}
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
struct ahci_port_priv *pp = ap->private_data;
struct ata_eh_info *host_ehi = &ap->link.eh_info;
struct ata_link *link = NULL;
struct ata_queued_cmd *active_qc;
struct ata_eh_info *active_ehi;
u32 serror;
/* determine active link */
ata_for_each_link(link, ap, EDGE)
if (ata_link_active(link))
break;
if (!link)
link = &ap->link;
active_qc = ata_qc_from_tag(ap, link->active_tag);
active_ehi = &link->eh_info;
/* record irq stat */
ata_ehi_clear_desc(host_ehi);
ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
/* AHCI needs SError cleared; otherwise, it might lock up */
ahci_scr_read(&ap->link, SCR_ERROR, &serror);
ahci_scr_write(&ap->link, SCR_ERROR, serror);
host_ehi->serror |= serror;
/* some controllers set IRQ_IF_ERR on device errors, ignore it */
if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
irq_stat &= ~PORT_IRQ_IF_ERR;
if (irq_stat & PORT_IRQ_TF_ERR) {
/* If qc is active, charge it; otherwise, the active
* link. There's no active qc on NCQ errors. It will
* be determined by EH by reading log page 10h.
*/
if (active_qc)
active_qc->err_mask |= AC_ERR_DEV;
else
active_ehi->err_mask |= AC_ERR_DEV;
if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
host_ehi->serror &= ~SERR_INTERNAL;
}
if (irq_stat & PORT_IRQ_UNK_FIS) {
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
active_ehi->err_mask |= AC_ERR_HSM;
active_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(active_ehi,
"unknown FIS %08x %08x %08x %08x" ,
unk[0], unk[1], unk[2], unk[3]);
}
if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) {
active_ehi->err_mask |= AC_ERR_HSM;
active_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(active_ehi, "incorrect PMP");
}
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
host_ehi->err_mask |= AC_ERR_HOST_BUS;
host_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(host_ehi, "host bus error");
}
if (irq_stat & PORT_IRQ_IF_ERR) {
host_ehi->err_mask |= AC_ERR_ATA_BUS;
host_ehi->action |= ATA_EH_RESET;
ata_ehi_push_desc(host_ehi, "interface fatal error");
}
if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
ata_ehi_hotplugged(host_ehi);
ata_ehi_push_desc(host_ehi, "%s",
irq_stat & PORT_IRQ_CONNECT ?
"connection status changed" : "PHY RDY changed");
}
/* okay, let's hand over to EH */
if (irq_stat & PORT_IRQ_FREEZE)
ata_port_freeze(ap);
else
ata_port_abort(ap);
}
static void ahci_port_intr(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_eh_info *ehi = &ap->link.eh_info;
struct ahci_port_priv *pp = ap->private_data;
struct ahci_host_priv *hpriv = ap->host->private_data;
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
u32 status, qc_active;
int rc;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
/* ignore BAD_PMP while resetting */
if (unlikely(resetting))
status &= ~PORT_IRQ_BAD_PMP;
/* If we are getting PhyRdy, this is
* just a power state change, we should
* clear out this, plus the PhyRdy/Comm
* Wake bits from Serror
*/
if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
(status & PORT_IRQ_PHYRDY)) {
status &= ~PORT_IRQ_PHYRDY;
ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
}
if (unlikely(status & PORT_IRQ_ERROR)) {
ahci_error_intr(ap, status);
return;
}
if (status & PORT_IRQ_SDB_FIS) {
/* If SNotification is available, leave notification
* handling to sata_async_notification(). If not,
* emulate it by snooping SDB FIS RX area.
*
* Snooping FIS RX area is probably cheaper than
* poking SNotification but some constrollers which
* implement SNotification, ICH9 for example, don't
* store AN SDB FIS into receive area.
*/
if (hpriv->cap & HOST_CAP_SNTF)
sata_async_notification(ap);
else {
/* If the 'N' bit in word 0 of the FIS is set,
* we just received asynchronous notification.
* Tell libata about it.
*/
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
u32 f0 = le32_to_cpu(f[0]);
if (f0 & (1 << 15))
sata_async_notification(ap);
}
}
/* pp->active_link is valid iff any command is in flight */
if (ap->qc_active && pp->active_link->sactive)
qc_active = readl(port_mmio + PORT_SCR_ACT);
else
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
rc = ata_qc_complete_multiple(ap, qc_active);
/* while resetting, invalid completions are expected */
if (unlikely(rc < 0 && !resetting)) {
ehi->err_mask |= AC_ERR_HSM;
ehi->action |= ATA_EH_RESET;
ata_port_freeze(ap);
}
}
static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ahci_host_priv *hpriv;
unsigned int i, handled = 0;
void __iomem *mmio;
u32 irq_stat, irq_masked;
VPRINTK("ENTER\n");
hpriv = host->private_data;
mmio = host->iomap[AHCI_PCI_BAR];
/* sigh. 0xffffffff is a valid return from h/w */
irq_stat = readl(mmio + HOST_IRQ_STAT);
if (!irq_stat)
return IRQ_NONE;
irq_masked = irq_stat & hpriv->port_map;
spin_lock(&host->lock);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap;
if (!(irq_masked & (1 << i)))
continue;
ap = host->ports[i];
if (ap) {
ahci_port_intr(ap);
VPRINTK("port %u\n", i);
} else {
VPRINTK("port %u (no irq)\n", i);
if (ata_ratelimit())
dev_printk(KERN_WARNING, host->dev,
"interrupt on disabled port %u\n", i);
}
handled = 1;
}
/* HOST_IRQ_STAT behaves as level triggered latch meaning that
* it should be cleared after all the port events are cleared;
* otherwise, it will raise a spurious interrupt after each
* valid one. Please read section 10.6.2 of ahci 1.1 for more
* information.
*
* Also, use the unmasked value to clear interrupt as spurious
* pending event on a dummy port might cause screaming IRQ.
*/
writel(irq_stat, mmio + HOST_IRQ_STAT);
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
return IRQ_RETVAL(handled);
}
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_port_priv *pp = ap->private_data;
/* Keep track of the currently active link. It will be used
* in completion path to determine whether NCQ phase is in
* progress.
*/
pp->active_link = qc->dev->link;
if (qc->tf.protocol == ATA_PROT_NCQ)
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
ahci_sw_activity(qc->dev->link);
return 0;
}
static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc)
{
struct ahci_port_priv *pp = qc->ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
ata_tf_from_fis(d2h_fis, &qc->result_tf);
return true;
}
static void ahci_freeze(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
/* turn IRQ off */
writel(0, port_mmio + PORT_IRQ_MASK);
}
static void ahci_thaw(struct ata_port *ap)
{
void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
void __iomem *port_mmio = ahci_port_base(ap);
u32 tmp;
struct ahci_port_priv *pp = ap->private_data;
/* clear IRQ */
tmp = readl(port_mmio + PORT_IRQ_STAT);
writel(tmp, port_mmio + PORT_IRQ_STAT);
writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
/* turn IRQ back on */
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
}
static void ahci_error_handler(struct ata_port *ap)
{
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
/* restart engine */
ahci_stop_engine(ap);
ahci_start_engine(ap);
}
sata_pmp_error_handler(ap);
}
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
/* make DMA engine forget about the failed command */
if (qc->flags & ATA_QCFLAG_FAILED)
ahci_kick_engine(ap, 1);
}
static void ahci_pmp_attach(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_port_priv *pp = ap->private_data;
u32 cmd;
cmd = readl(port_mmio + PORT_CMD);
cmd |= PORT_CMD_PMP;
writel(cmd, port_mmio + PORT_CMD);
pp->intr_mask |= PORT_IRQ_BAD_PMP;
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
}
static void ahci_pmp_detach(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ahci_port_priv *pp = ap->private_data;
u32 cmd;
cmd = readl(port_mmio + PORT_CMD);
cmd &= ~PORT_CMD_PMP;
writel(cmd, port_mmio + PORT_CMD);
pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
}
static int ahci_port_resume(struct ata_port *ap)
{
ahci_power_up(ap);
ahci_start_port(ap);
if (sata_pmp_attached(ap))
ahci_pmp_attach(ap);
else
ahci_pmp_detach(ap);
return 0;
}
#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
const char *emsg = NULL;
int rc;
rc = ahci_deinit_port(ap, &emsg);
if (rc == 0)
ahci_power_down(ap);
else {
ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
ahci_start_port(ap);
}
return rc;
}
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 ctl;
if (mesg.event & PM_EVENT_SLEEP) {
/* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
*/
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
}
return ata_pci_device_suspend(pdev, mesg);
}
static int ahci_pci_device_resume(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
}
ata_host_resume(host);
return 0;
}
#endif
static int ahci_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct ahci_port_priv *pp;
void *mem;
dma_addr_t mem_dma;
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
GFP_KERNEL);
if (!mem)
return -ENOMEM;
memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
/*
* First item in chunk of DMA memory: 32-slot command table,
* 32 bytes each in size
*/
pp->cmd_slot = mem;
pp->cmd_slot_dma = mem_dma;
mem += AHCI_CMD_SLOT_SZ;
mem_dma += AHCI_CMD_SLOT_SZ;
/*
* Second item: Received-FIS area
*/
pp->rx_fis = mem;
pp->rx_fis_dma = mem_dma;
mem += AHCI_RX_FIS_SZ;
mem_dma += AHCI_RX_FIS_SZ;
/*
* Third item: data area for storing a single command
* and its scatter-gather table
*/
pp->cmd_tbl = mem;
pp->cmd_tbl_dma = mem_dma;
/*
* Save off initial list of interrupts to be enabled.
* This could be changed later
*/
pp->intr_mask = DEF_PORT_IRQ;
ap->private_data = pp;
/* engage engines, captain */
return ahci_port_resume(ap);
}
static void ahci_port_stop(struct ata_port *ap)
{
const char *emsg = NULL;
int rc;
/* de-initialize port */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
}
static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
{
int rc;
if (using_dac &&
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (rc) {
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"64-bit DMA enable failed\n");
return rc;
}
}
} else {
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
}
return 0;
}
static void ahci_print_info(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 vers, cap, impl, speed;
const char *speed_s;
u16 cc;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = hpriv->cap;
impl = hpriv->port_map;
speed = (cap >> 20) & 0xf;
if (speed == 1)
speed_s = "1.5";
else if (speed == 2)
speed_s = "3";
else if (speed == 3)
speed_s = "6";
else
speed_s = "?";
pci_read_config_word(pdev, 0x0a, &cc);
if (cc == PCI_CLASS_STORAGE_IDE)
scc_s = "IDE";
else if (cc == PCI_CLASS_STORAGE_SATA)
scc_s = "SATA";
else if (cc == PCI_CLASS_STORAGE_RAID)
scc_s = "RAID";
else
scc_s = "unknown";
dev_printk(KERN_INFO, &pdev->dev,
"AHCI %02x%02x.%02x%02x "
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
,
(vers >> 24) & 0xff,
(vers >> 16) & 0xff,
(vers >> 8) & 0xff,
vers & 0xff,
((cap >> 8) & 0x1f) + 1,
(cap & 0x1f) + 1,
speed_s,
impl,
scc_s);
dev_printk(KERN_INFO, &pdev->dev,
"flags: "
"%s%s%s%s%s%s%s"
"%s%s%s%s%s%s%s"
"%s\n"
,
cap & (1 << 31) ? "64bit " : "",
cap & (1 << 30) ? "ncq " : "",
cap & (1 << 29) ? "sntf " : "",
cap & (1 << 28) ? "ilck " : "",
cap & (1 << 27) ? "stag " : "",
cap & (1 << 26) ? "pm " : "",
cap & (1 << 25) ? "led " : "",
cap & (1 << 24) ? "clo " : "",
cap & (1 << 19) ? "nz " : "",
cap & (1 << 18) ? "only " : "",
cap & (1 << 17) ? "pmp " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
cap & (1 << 13) ? "part " : "",
cap & (1 << 6) ? "ems ": ""
);
}
/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
* hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
* support PMP and the 4726 either directly exports the device
* attached to the first downstream port or acts as a hardware storage
* controller and emulate a single ATA device (can be RAID 0/1 or some
* other configuration).
*
* When there's no device attached to the first downstream port of the
* 4726, "Config Disk" appears, which is a pseudo ATA device to
* configure the 4726. However, ATA emulation of the device is very
* lame. It doesn't send signature D2H Reg FIS after the initial
* hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
*
* The following function works around the problem by always using
* hardreset on the port and not depending on receiving signature FIS
* afterward. If signature FIS isn't received soon, ATA class is
* assumed without follow-up softreset.
*/
static void ahci_p5wdh_workaround(struct ata_host *host)
{
static struct dmi_system_id sysids[] = {
{
.ident = "P5W DH Deluxe",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR,
"ASUSTEK COMPUTER INC"),
DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
},
},
{ }
};
struct pci_dev *pdev = to_pci_dev(host->dev);
if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
dmi_check_system(sysids)) {
struct ata_port *ap = host->ports[1];
dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
"Deluxe on-board SIMG4726 workaround\n");
ap->ops = &ahci_p5wdh_ops;
ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
}
}
static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
{
static const struct dmi_system_id broken_systems[] = {
{
.ident = "HP Compaq nx6310",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"),
},
/* PCI slot number of the controller */
.driver_data = (void *)0x1FUL,
},
{
.ident = "HP Compaq 6720s",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
},
/* PCI slot number of the controller */
.driver_data = (void *)0x1FUL,
},
{ } /* terminate list */
};
const struct dmi_system_id *dmi = dmi_first_match(broken_systems);
if (dmi) {
unsigned long slot = (unsigned long)dmi->driver_data;
/* apply the quirk only to on-board controllers */
return slot == PCI_SLOT(pdev->devfn);
}
return false;
}
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
unsigned int board_id = ent->driver_data;
struct ata_port_info pi = ahci_port_info[board_id];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct ata_host *host;
int n_ports, i, rc;
VPRINTK("ENTER\n");
WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
/* The AHCI driver can only drive the SATA ports, the PATA driver
can drive them all so if both drivers are selected make sure
AHCI stays out of the way */
if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
return -ENODEV;
/* acquire resources */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* AHCI controllers often implement SFF compatible interface.
* Grab all PCI BARs just in case.
*/
rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
if (rc)
return rc;
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
u8 map;
/* ICH6s share the same PCI ID for both piix and ahci
* modes. Enabling ahci mode while MAP indicates
* combined mode is a bad idea. Yield to ata_piix.
*/
pci_read_config_byte(pdev, ICH_MAP, &map);
if (map & 0x3) {
dev_printk(KERN_INFO, &pdev->dev, "controller is in "
"combined mode, can't enable AHCI mode\n");
return -ENODEV;
}
}
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
hpriv->flags |= (unsigned long)pi.private_data;
/* MCP65 revision A1 and A2 can't do MSI */
if (board_id == board_ahci_mcp65 &&
(pdev->revision == 0xa1 || pdev->revision == 0xa2))
hpriv->flags |= AHCI_HFLAG_NO_MSI;
/* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
pci_enable_msi(pdev);
/* save initial config */
ahci_save_initial_config(pdev, hpriv);
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
u8 messages;
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
u32 em_loc = readl(mmio + HOST_EM_LOC);
u32 em_ctl = readl(mmio + HOST_EM_CTL);
messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
/* we only support LED message type right now */
if ((messages & 0x01) && (ahci_em_messages == 1)) {
/* store em_loc */
hpriv->em_loc = ((em_loc >> 16) * 4);
pi.flags |= ATA_FLAG_EM;
if (!(em_ctl & EM_CTL_ALHD))
pi.flags |= ATA_FLAG_SW_ACTIVITY;
}
}
if (ahci_broken_system_poweroff(pdev)) {
pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN;
dev_info(&pdev->dev,
"quirky BIOS, skipping spindown on poweroff\n");
}
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
0x100 + ap->port_no * 0x80, "port");
/* set initial link pm policy */
ap->pm_policy = NOT_AVAILABLE;
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = ahci_em_messages;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
/* apply workaround for ASUS P5W DH Deluxe mainboard */
ahci_p5wdh_workaround(host);
/* initialize adapter */
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
if (rc)
return rc;
rc = ahci_reset_controller(host);
if (rc)
return rc;
ahci_init_controller(host);
ahci_print_info(host);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
&ahci_sht);
}
static int __init ahci_init(void)
{
return pci_register_driver(&ahci_pci_driver);
}
static void __exit ahci_exit(void)
{
pci_unregister_driver(&ahci_pci_driver);
}
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("AHCI SATA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
MODULE_VERSION(DRV_VERSION);
module_init(ahci_init);
module_exit(ahci_exit);
Reference in New Issue View Git Blame Copy Permalink