linux/drivers/net/wireless/iwlwifi/iwl-agn-lib.c

/******************************************************************************
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 *****************************************************************************/
#include <linux/etherdevice.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>

#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-shared.h"

int iwlagn_hw_valid_rtc_data_addr(u32 addr)
{
	return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
		(addr < IWLAGN_RTC_DATA_UPPER_BOUND);
}

int iwlagn_send_tx_power(struct iwl_priv *priv)
{
	struct iwlagn_tx_power_dbm_cmd tx_power_cmd;
	u8 tx_ant_cfg_cmd;

	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->shrd->status),
		      "TX Power requested while scanning!\n"))
		return -EAGAIN;

	/* half dBm need to multiply */
	tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);

	if (priv->tx_power_lmt_in_half_dbm &&
	    priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
		/*
		 * For the newer devices which using enhanced/extend tx power
		 * table in EEPROM, the format is in half dBm. driver need to
		 * convert to dBm format before report to mac80211.
		 * By doing so, there is a possibility of 1/2 dBm resolution
		 * lost. driver will perform "round-up" operation before
		 * reporting, but it will cause 1/2 dBm tx power over the
		 * regulatory limit. Perform the checking here, if the
		 * "tx_power_user_lmt" is higher than EEPROM value (in
		 * half-dBm format), lower the tx power based on EEPROM
		 */
		tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
	}
	tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED;
	tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO;

	if (IWL_UCODE_API(priv->ucode_ver) == 1)
		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
	else
		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;

	return iwl_trans_send_cmd_pdu(trans(priv), tx_ant_cfg_cmd, CMD_SYNC,
			sizeof(tx_power_cmd), &tx_power_cmd);
}

void iwlagn_temperature(struct iwl_priv *priv)
{
	/* store temperature from correct statistics (in Celsius) */
	priv->temperature = le32_to_cpu(priv->statistics.common.temperature);
	iwl_tt_handler(priv);
}

u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv)
{
	struct iwl_eeprom_calib_hdr *hdr;

	hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
							EEPROM_CALIB_ALL);
	return hdr->version;

}

/*
 * EEPROM
 */
static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
{
	u16 offset = 0;

	if ((address & INDIRECT_ADDRESS) == 0)
		return address;

	switch (address & INDIRECT_TYPE_MSK) {
	case INDIRECT_HOST:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST);
		break;
	case INDIRECT_GENERAL:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL);
		break;
	case INDIRECT_REGULATORY:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
		break;
	case INDIRECT_TXP_LIMIT:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT);
		break;
	case INDIRECT_TXP_LIMIT_SIZE:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE);
		break;
	case INDIRECT_CALIBRATION:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
		break;
	case INDIRECT_PROCESS_ADJST:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST);
		break;
	case INDIRECT_OTHERS:
		offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS);
		break;
	default:
		IWL_ERR(priv, "illegal indirect type: 0x%X\n",
		address & INDIRECT_TYPE_MSK);
		break;
	}

	/* translate the offset from words to byte */
	return (address & ADDRESS_MSK) + (offset << 1);
}

const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset)
{
	u32 address = eeprom_indirect_address(priv, offset);
	BUG_ON(address >= priv->cfg->base_params->eeprom_size);
	return &priv->eeprom[address];
}

struct iwl_mod_params iwlagn_mod_params = {
	.amsdu_size_8K = 1,
	.restart_fw = 1,
	.plcp_check = true,
	.bt_coex_active = true,
	.no_sleep_autoadjust = true,
	.power_level = IWL_POWER_INDEX_1,
	.bt_ch_announce = true,
	.wanted_ucode_alternative = 1,
	.auto_agg = true,
	/* the rest are 0 by default */
};

int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
{
	int idx = 0;
	int band_offset = 0;

	/* HT rate format: mac80211 wants an MCS number, which is just LSB */
	if (rate_n_flags & RATE_MCS_HT_MSK) {
		idx = (rate_n_flags & 0xff);
		return idx;
	/* Legacy rate format, search for match in table */
	} else {
		if (band == IEEE80211_BAND_5GHZ)
			band_offset = IWL_FIRST_OFDM_RATE;
		for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
			if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
				return idx - band_offset;
	}

	return -1;
}

int iwlagn_manage_ibss_station(struct iwl_priv *priv,
			       struct ieee80211_vif *vif, bool add)
{
	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;

	if (add)
		return iwlagn_add_bssid_station(priv, vif_priv->ctx,
						vif->bss_conf.bssid,
						&vif_priv->ibss_bssid_sta_id);
	return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
				  vif->bss_conf.bssid);
}

/**
 * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
 *
 * pre-requirements:
 *  1. acquire mutex before calling
 *  2. make sure rf is on and not in exit state
 */
int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
{
	struct iwl_txfifo_flush_cmd flush_cmd;
	struct iwl_host_cmd cmd = {
		.id = REPLY_TXFIFO_FLUSH,
		.len = { sizeof(struct iwl_txfifo_flush_cmd), },
		.flags = CMD_SYNC,
		.data = { &flush_cmd, },
	};

	might_sleep();

	memset(&flush_cmd, 0, sizeof(flush_cmd));
	if (flush_control & BIT(IWL_RXON_CTX_BSS))
		flush_cmd.fifo_control = IWL_SCD_VO_MSK | IWL_SCD_VI_MSK |
				 IWL_SCD_BE_MSK | IWL_SCD_BK_MSK |
				 IWL_SCD_MGMT_MSK;
	if ((flush_control & BIT(IWL_RXON_CTX_PAN)) &&
	    (priv->shrd->valid_contexts != BIT(IWL_RXON_CTX_BSS)))
		flush_cmd.fifo_control |= IWL_PAN_SCD_VO_MSK |
				IWL_PAN_SCD_VI_MSK | IWL_PAN_SCD_BE_MSK |
				IWL_PAN_SCD_BK_MSK | IWL_PAN_SCD_MGMT_MSK |
				IWL_PAN_SCD_MULTICAST_MSK;

	if (priv->cfg->sku & EEPROM_SKU_CAP_11N_ENABLE)
		flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK;

	IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n",
		       flush_cmd.fifo_control);
	flush_cmd.flush_control = cpu_to_le16(flush_control);

	return iwl_trans_send_cmd(trans(priv), &cmd);
}

void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
{
	mutex_lock(&priv->shrd->mutex);
	ieee80211_stop_queues(priv->hw);
	if (iwlagn_txfifo_flush(priv, IWL_DROP_ALL)) {
		IWL_ERR(priv, "flush request fail\n");
		goto done;
	}
	IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n");
	iwl_trans_wait_tx_queue_empty(trans(priv));
done:
	ieee80211_wake_queues(priv->hw);
	mutex_unlock(&priv->shrd->mutex);
}

/*
 * BT coex
 */
/*
 * Macros to access the lookup table.
 *
 * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
* wifi_prio, wifi_txrx and wifi_sh_ant_req.
 *
 * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
 *
 * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
 * one after another in 32-bit registers, and "registers" 0 through 7 contain
 * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
 *
 * These macros encode that format.
 */
#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
		  wifi_txrx, wifi_sh_ant_req) \
	(bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
	(wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))

#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
	lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
				 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	(!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
				   bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
				   wifi_sh_ant_req))))
#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
				wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
			       bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
			       wifi_sh_ant_req))
#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
				  wifi_req, wifi_prio, wifi_txrx, \
				  wifi_sh_ant_req) \
	LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
			       bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
			       wifi_sh_ant_req))

#define LUT_WLAN_KILL_OP(lut, op, val) \
	lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
			   wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	(!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
			     wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
			  wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
			 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
			    wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
			 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))

#define LUT_ANT_SWITCH_OP(lut, op, val) \
	lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
			    wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	(!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
			      wifi_req, wifi_prio, wifi_txrx, \
			      wifi_sh_ant_req))))
#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
			   wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
			  wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
			     wifi_prio, wifi_txrx, wifi_sh_ant_req) \
	LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
			  wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))

static const __le32 iwlagn_def_3w_lookup[12] = {
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaeaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xcc00ff28),
	cpu_to_le32(0x0000aaaa),
	cpu_to_le32(0xcc00aaaa),
	cpu_to_le32(0x0000aaaa),
	cpu_to_le32(0xc0004000),
	cpu_to_le32(0x00004000),
	cpu_to_le32(0xf0005000),
	cpu_to_le32(0xf0005000),
};

static const __le32 iwlagn_concurrent_lookup[12] = {
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0xaaaaaaaa),
	cpu_to_le32(0x00000000),
	cpu_to_le32(0x00000000),
	cpu_to_le32(0x00000000),
	cpu_to_le32(0x00000000),
};

void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
{
	struct iwl_basic_bt_cmd basic = {
		.max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
		.bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
		.bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
		.bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
	};
	struct iwl6000_bt_cmd bt_cmd_6000;
	struct iwl2000_bt_cmd bt_cmd_2000;
	int ret;

	BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
			sizeof(basic.bt3_lookup_table));

	if (priv->cfg->bt_params) {
		if (priv->cfg->bt_params->bt_session_2) {
			bt_cmd_2000.prio_boost = cpu_to_le32(
				priv->cfg->bt_params->bt_prio_boost);
			bt_cmd_2000.tx_prio_boost = 0;
			bt_cmd_2000.rx_prio_boost = 0;
		} else {
			bt_cmd_6000.prio_boost =
				priv->cfg->bt_params->bt_prio_boost;
			bt_cmd_6000.tx_prio_boost = 0;
			bt_cmd_6000.rx_prio_boost = 0;
		}
	} else {
		IWL_ERR(priv, "failed to construct BT Coex Config\n");
		return;
	}

	basic.kill_ack_mask = priv->kill_ack_mask;
	basic.kill_cts_mask = priv->kill_cts_mask;
	basic.valid = priv->bt_valid;

	/*
	 * Configure BT coex mode to "no coexistence" when the
	 * user disabled BT coexistence, we have no interface
	 * (might be in monitor mode), or the interface is in
	 * IBSS mode (no proper uCode support for coex then).
	 */
	if (!iwlagn_mod_params.bt_coex_active ||
	    priv->iw_mode == NL80211_IFTYPE_ADHOC) {
		basic.flags = IWLAGN_BT_FLAG_COEX_MODE_DISABLED;
	} else {
		basic.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
					IWLAGN_BT_FLAG_COEX_MODE_SHIFT;

		if (!priv->bt_enable_pspoll)
			basic.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
		else
			basic.flags &= ~IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;

		if (priv->bt_ch_announce)
			basic.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
		IWL_DEBUG_COEX(priv, "BT coex flag: 0X%x\n", basic.flags);
	}
	priv->bt_enable_flag = basic.flags;
	if (priv->bt_full_concurrent)
		memcpy(basic.bt3_lookup_table, iwlagn_concurrent_lookup,
			sizeof(iwlagn_concurrent_lookup));
	else
		memcpy(basic.bt3_lookup_table, iwlagn_def_3w_lookup,
			sizeof(iwlagn_def_3w_lookup));

	IWL_DEBUG_COEX(priv, "BT coex %s in %s mode\n",
		       basic.flags ? "active" : "disabled",
		       priv->bt_full_concurrent ?
		       "full concurrency" : "3-wire");

	if (priv->cfg->bt_params->bt_session_2) {
		memcpy(&bt_cmd_2000.basic, &basic,
			sizeof(basic));
		ret = iwl_trans_send_cmd_pdu(trans(priv), REPLY_BT_CONFIG,
			CMD_SYNC, sizeof(bt_cmd_2000), &bt_cmd_2000);
	} else {
		memcpy(&bt_cmd_6000.basic, &basic,
			sizeof(basic));
		ret = iwl_trans_send_cmd_pdu(trans(priv), REPLY_BT_CONFIG,
			CMD_SYNC, sizeof(bt_cmd_6000), &bt_cmd_6000);
	}
	if (ret)
		IWL_ERR(priv, "failed to send BT Coex Config\n");

}

void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena)
{
	struct iwl_rxon_context *ctx, *found_ctx = NULL;
	bool found_ap = false;

	lockdep_assert_held(&priv->shrd->mutex);

	/* Check whether AP or GO mode is active. */
	if (rssi_ena) {
		for_each_context(priv, ctx) {
			if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_AP &&
			    iwl_is_associated_ctx(ctx)) {
				found_ap = true;
				break;
			}
		}
	}

	/*
	 * If disable was received or If GO/AP mode, disable RSSI
	 * measurements.
	 */
	if (!rssi_ena || found_ap) {
		if (priv->cur_rssi_ctx) {
			ctx = priv->cur_rssi_ctx;
			ieee80211_disable_rssi_reports(ctx->vif);
			priv->cur_rssi_ctx = NULL;
		}
		return;
	}

	/*
	 * If rssi measurements need to be enabled, consider all cases now.
	 * Figure out how many contexts are active.
	 */
	for_each_context(priv, ctx) {
		if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION &&
		    iwl_is_associated_ctx(ctx)) {
			found_ctx = ctx;
			break;
		}
	}

	/*
	 * rssi monitor already enabled for the correct interface...nothing
	 * to do.
	 */
	if (found_ctx == priv->cur_rssi_ctx)
		return;

	/*
	 * Figure out if rssi monitor is currently enabled, and needs
	 * to be changed. If rssi monitor is already enabled, disable
	 * it first else just enable rssi measurements on the
	 * interface found above.
	 */
	if (priv->cur_rssi_ctx) {
		ctx = priv->cur_rssi_ctx;
		if (ctx->vif)
			ieee80211_disable_rssi_reports(ctx->vif);
	}

	priv->cur_rssi_ctx = found_ctx;

	if (!found_ctx)
		return;

	ieee80211_enable_rssi_reports(found_ctx->vif,
			IWLAGN_BT_PSP_MIN_RSSI_THRESHOLD,
			IWLAGN_BT_PSP_MAX_RSSI_THRESHOLD);
}

static bool iwlagn_bt_traffic_is_sco(struct iwl_bt_uart_msg *uart_msg)
{
	return BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3 >>
			BT_UART_MSG_FRAME3SCOESCO_POS;
}

static void iwlagn_bt_traffic_change_work(struct work_struct *work)
{
	struct iwl_priv *priv =
		container_of(work, struct iwl_priv, bt_traffic_change_work);
	struct iwl_rxon_context *ctx;
	int smps_request = -1;

	if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
		/* bt coex disabled */
		return;
	}

	/*
	 * Note: bt_traffic_load can be overridden by scan complete and
	 * coex profile notifications. Ignore that since only bad consequence
	 * can be not matching debug print with actual state.
	 */
	IWL_DEBUG_COEX(priv, "BT traffic load changes: %d\n",
		       priv->bt_traffic_load);

	switch (priv->bt_traffic_load) {
	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
		if (priv->bt_status)
			smps_request = IEEE80211_SMPS_DYNAMIC;
		else
			smps_request = IEEE80211_SMPS_AUTOMATIC;
		break;
	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
		smps_request = IEEE80211_SMPS_DYNAMIC;
		break;
	case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
	case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
		smps_request = IEEE80211_SMPS_STATIC;
		break;
	default:
		IWL_ERR(priv, "Invalid BT traffic load: %d\n",
			priv->bt_traffic_load);
		break;
	}

	mutex_lock(&priv->shrd->mutex);

	/*
	 * We can not send command to firmware while scanning. When the scan
	 * complete we will schedule this work again. We do check with mutex
	 * locked to prevent new scan request to arrive. We do not check
	 * STATUS_SCANNING to avoid race when queue_work two times from
	 * different notifications, but quit and not perform any work at all.
	 */
	if (test_bit(STATUS_SCAN_HW, &priv->shrd->status))
		goto out;

	iwl_update_chain_flags(priv);

	if (smps_request != -1) {
		priv->current_ht_config.smps = smps_request;
		for_each_context(priv, ctx) {
			if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION)
				ieee80211_request_smps(ctx->vif, smps_request);
		}
	}

	/*
	 * Dynamic PS poll related functionality. Adjust RSSI measurements if
	 * necessary.
	 */
	iwlagn_bt_coex_rssi_monitor(priv);
out:
	mutex_unlock(&priv->shrd->mutex);
}

/*
 * If BT sco traffic, and RSSI monitor is enabled, move measurements to the
 * correct interface or disable it if this is the last interface to be
 * removed.
 */
void iwlagn_bt_coex_rssi_monitor(struct iwl_priv *priv)
{
	if (priv->bt_is_sco &&
	    priv->bt_traffic_load == IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS)
		iwlagn_bt_adjust_rssi_monitor(priv, true);
	else
		iwlagn_bt_adjust_rssi_monitor(priv, false);
}

static void iwlagn_print_uartmsg(struct iwl_priv *priv,
				struct iwl_bt_uart_msg *uart_msg)
{
	IWL_DEBUG_COEX(priv, "Message Type = 0x%X, SSN = 0x%X, "
			"Update Req = 0x%X",
		(BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
			BT_UART_MSG_FRAME1MSGTYPE_POS,
		(BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
			BT_UART_MSG_FRAME1SSN_POS,
		(BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
			BT_UART_MSG_FRAME1UPDATEREQ_POS);

	IWL_DEBUG_COEX(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
			"Chl_SeqN = 0x%X, In band = 0x%X",
		(BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
			BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
		(BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
			BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
		(BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
			BT_UART_MSG_FRAME2CHLSEQN_POS,
		(BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
			BT_UART_MSG_FRAME2INBAND_POS);

	IWL_DEBUG_COEX(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
			"ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
		(BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
			BT_UART_MSG_FRAME3SCOESCO_POS,
		(BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
			BT_UART_MSG_FRAME3SNIFF_POS,
		(BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
			BT_UART_MSG_FRAME3A2DP_POS,
		(BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
			BT_UART_MSG_FRAME3ACL_POS,
		(BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
			BT_UART_MSG_FRAME3MASTER_POS,
		(BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
			BT_UART_MSG_FRAME3OBEX_POS);

	IWL_DEBUG_COEX(priv, "Idle duration = 0x%X",
		(BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
			BT_UART_MSG_FRAME4IDLEDURATION_POS);

	IWL_DEBUG_COEX(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
			"eSCO Retransmissions = 0x%X",
		(BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
			BT_UART_MSG_FRAME5TXACTIVITY_POS,
		(BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
			BT_UART_MSG_FRAME5RXACTIVITY_POS,
		(BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
			BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);

	IWL_DEBUG_COEX(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X",
		(BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
			BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
		(BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
			BT_UART_MSG_FRAME6DISCOVERABLE_POS);

	IWL_DEBUG_COEX(priv, "Sniff Activity = 0x%X, Page = "
			"0x%X, Inquiry = 0x%X, Connectable = 0x%X",
		(BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
			BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
		(BT_UART_MSG_FRAME7PAGE_MSK & uart_msg->frame7) >>
			BT_UART_MSG_FRAME7PAGE_POS,
		(BT_UART_MSG_FRAME7INQUIRY_MSK & uart_msg->frame7) >>
			BT_UART_MSG_FRAME7INQUIRY_POS,
		(BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
			BT_UART_MSG_FRAME7CONNECTABLE_POS);
}

static void iwlagn_set_kill_msk(struct iwl_priv *priv,
				struct iwl_bt_uart_msg *uart_msg)
{
	u8 kill_msk;
	static const __le32 bt_kill_ack_msg[2] = {
		IWLAGN_BT_KILL_ACK_MASK_DEFAULT,
		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO };
	static const __le32 bt_kill_cts_msg[2] = {
		IWLAGN_BT_KILL_CTS_MASK_DEFAULT,
		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO };

	kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
		? 1 : 0;
	if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] ||
	    priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) {
		priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
		priv->kill_ack_mask = bt_kill_ack_msg[kill_msk];
		priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK;
		priv->kill_cts_mask = bt_kill_cts_msg[kill_msk];

		/* schedule to send runtime bt_config */
		queue_work(priv->shrd->workqueue, &priv->bt_runtime_config);
	}
}

int iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
				  struct iwl_rx_mem_buffer *rxb,
				  struct iwl_device_cmd *cmd)
{
	unsigned long flags;
	struct iwl_rx_packet *pkt = rxb_addr(rxb);
	struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
	struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;

	if (priv->bt_enable_flag == IWLAGN_BT_FLAG_COEX_MODE_DISABLED) {
		/* bt coex disabled */
		return 0;
	}

	IWL_DEBUG_COEX(priv, "BT Coex notification:\n");
	IWL_DEBUG_COEX(priv, "    status: %d\n", coex->bt_status);
	IWL_DEBUG_COEX(priv, "    traffic load: %d\n", coex->bt_traffic_load);
	IWL_DEBUG_COEX(priv, "    CI compliance: %d\n",
			coex->bt_ci_compliance);
	iwlagn_print_uartmsg(priv, uart_msg);

	priv->last_bt_traffic_load = priv->bt_traffic_load;
	priv->bt_is_sco = iwlagn_bt_traffic_is_sco(uart_msg);

	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
		if (priv->bt_status != coex->bt_status ||
		    priv->last_bt_traffic_load != coex->bt_traffic_load) {
			if (coex->bt_status) {
				/* BT on */
				if (!priv->bt_ch_announce)
					priv->bt_traffic_load =
						IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
				else
					priv->bt_traffic_load =
						coex->bt_traffic_load;
			} else {
				/* BT off */
				priv->bt_traffic_load =
					IWL_BT_COEX_TRAFFIC_LOAD_NONE;
			}
			priv->bt_status = coex->bt_status;
			queue_work(priv->shrd->workqueue,
				   &priv->bt_traffic_change_work);
		}
	}

	iwlagn_set_kill_msk(priv, uart_msg);

	/* FIXME: based on notification, adjust the prio_boost */

	spin_lock_irqsave(&priv->shrd->lock, flags);
	priv->bt_ci_compliance = coex->bt_ci_compliance;
	spin_unlock_irqrestore(&priv->shrd->lock, flags);
	return 0;
}

void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
{
	priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
		iwlagn_bt_coex_profile_notif;
}

void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
{
	INIT_WORK(&priv->bt_traffic_change_work,
		  iwlagn_bt_traffic_change_work);
}

void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
{
	cancel_work_sync(&priv->bt_traffic_change_work);
}

static bool is_single_rx_stream(struct iwl_priv *priv)
{
	return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
	       priv->current_ht_config.single_chain_sufficient;
}

#define IWL_NUM_RX_CHAINS_MULTIPLE	3
#define IWL_NUM_RX_CHAINS_SINGLE	2
#define IWL_NUM_IDLE_CHAINS_DUAL	2
#define IWL_NUM_IDLE_CHAINS_SINGLE	1

/*
 * Determine how many receiver/antenna chains to use.
 *
 * More provides better reception via diversity.  Fewer saves power
 * at the expense of throughput, but only when not in powersave to
 * start with.
 *
 * MIMO (dual stream) requires at least 2, but works better with 3.
 * This does not determine *which* chains to use, just how many.
 */
static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
{
	if (priv->cfg->bt_params &&
	    priv->cfg->bt_params->advanced_bt_coexist &&
	    (priv->bt_full_concurrent ||
	     priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
		/*
		 * only use chain 'A' in bt high traffic load or
		 * full concurrency mode
		 */
		return IWL_NUM_RX_CHAINS_SINGLE;
	}
	/* # of Rx chains to use when expecting MIMO. */
	if (is_single_rx_stream(priv))
		return IWL_NUM_RX_CHAINS_SINGLE;
	else
		return IWL_NUM_RX_CHAINS_MULTIPLE;
}

/*
 * When we are in power saving mode, unless device support spatial
 * multiplexing power save, use the active count for rx chain count.
 */
static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
{
	/* # Rx chains when idling, depending on SMPS mode */
	switch (priv->current_ht_config.smps) {
	case IEEE80211_SMPS_STATIC:
	case IEEE80211_SMPS_DYNAMIC:
		return IWL_NUM_IDLE_CHAINS_SINGLE;
	case IEEE80211_SMPS_OFF:
		return active_cnt;
	default:
		WARN(1, "invalid SMPS mode %d",
		     priv->current_ht_config.smps);
		return active_cnt;
	}
}

/* up to 4 chains */
static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
{
	u8 res;
	res = (chain_bitmap & BIT(0)) >> 0;
	res += (chain_bitmap & BIT(1)) >> 1;
	res += (chain_bitmap & BIT(2)) >> 2;
	res += (chain_bitmap & BIT(3)) >> 3;
	return res;
}

/**
 * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
 *
 * Selects how many and which Rx receivers/antennas/chains to use.
 * This should not be used for scan command ... it puts data in wrong place.
 */
void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
{
	bool is_single = is_single_rx_stream(priv);
	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->shrd->status);
	u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
	u32 active_chains;
	u16 rx_chain;

	/* Tell uCode which antennas are actually connected.
	 * Before first association, we assume all antennas are connected.
	 * Just after first association, iwl_chain_noise_calibration()
	 *    checks which antennas actually *are* connected. */
	if (priv->chain_noise_data.active_chains)
		active_chains = priv->chain_noise_data.active_chains;
	else
		active_chains = hw_params(priv).valid_rx_ant;

	if (priv->cfg->bt_params &&
	    priv->cfg->bt_params->advanced_bt_coexist &&
	    (priv->bt_full_concurrent ||
	     priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
		/*
		 * only use chain 'A' in bt high traffic load or
		 * full concurrency mode
		 */
		active_chains = first_antenna(active_chains);
	}

	rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;

	/* How many receivers should we use? */
	active_rx_cnt = iwl_get_active_rx_chain_count(priv);
	idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);


	/* correct rx chain count according hw settings
	 * and chain noise calibration
	 */
	valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
	if (valid_rx_cnt < active_rx_cnt)
		active_rx_cnt = valid_rx_cnt;

	if (valid_rx_cnt < idle_rx_cnt)
		idle_rx_cnt = valid_rx_cnt;

	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
	rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;

	ctx->staging.rx_chain = cpu_to_le16(rx_chain);

	if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
		ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
	else
		ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;

	IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
			ctx->staging.rx_chain,
			active_rx_cnt, idle_rx_cnt);

	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
		active_rx_cnt < idle_rx_cnt);
}

u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
{
	int i;
	u8 ind = ant;

	if (priv->band == IEEE80211_BAND_2GHZ &&
	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
		return 0;

	for (i = 0; i < RATE_ANT_NUM - 1; i++) {
		ind = (ind + 1) < RATE_ANT_NUM ?  ind + 1 : 0;
		if (valid & BIT(ind))
			return ind;
	}
	return ant;
}

/* notification wait support */
void iwlagn_init_notification_wait(struct iwl_priv *priv,
				   struct iwl_notification_wait *wait_entry,
				   u8 cmd,
				   void (*fn)(struct iwl_priv *priv,
					      struct iwl_rx_packet *pkt,
					      void *data),
				   void *fn_data)
{
	wait_entry->fn = fn;
	wait_entry->fn_data = fn_data;
	wait_entry->cmd = cmd;
	wait_entry->triggered = false;
	wait_entry->aborted = false;

	spin_lock_bh(&priv->notif_wait_lock);
	list_add(&wait_entry->list, &priv->notif_waits);
	spin_unlock_bh(&priv->notif_wait_lock);
}

int iwlagn_wait_notification(struct iwl_priv *priv,
			     struct iwl_notification_wait *wait_entry,
			     unsigned long timeout)
{
	int ret;

	ret = wait_event_timeout(priv->notif_waitq,
				 wait_entry->triggered || wait_entry->aborted,
				 timeout);

	spin_lock_bh(&priv->notif_wait_lock);
	list_del(&wait_entry->list);
	spin_unlock_bh(&priv->notif_wait_lock);

	if (wait_entry->aborted)
		return -EIO;

	/* return value is always >= 0 */
	if (ret <= 0)
		return -ETIMEDOUT;
	return 0;
}

void iwlagn_remove_notification(struct iwl_priv *priv,
				struct iwl_notification_wait *wait_entry)
{
	spin_lock_bh(&priv->notif_wait_lock);
	list_del(&wait_entry->list);
	spin_unlock_bh(&priv->notif_wait_lock);
}