mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
0f57b21300
A bank PMIC EIC contains 16 EICs, and the operating registers are BIT0-BIT15, such as BIT0 of the register operated by EIC0. Using the one-dimensional array reg[CACHE_NR_REGS] for maintenance will cause the configuration of other EICs to be affected when operating a certain EIC. In order to solve this problem, configure the bit corresponding to the EIC through offset. Signed-off-by: Wenhua Lin <Wenhua.Lin@unisoc.com> Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
389 lines
10 KiB
C
389 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Spreadtrum Communications Inc.
|
|
* Copyright (C) 2018 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* EIC registers definition */
|
|
#define SPRD_PMIC_EIC_DATA 0x0
|
|
#define SPRD_PMIC_EIC_DMSK 0x4
|
|
#define SPRD_PMIC_EIC_IEV 0x14
|
|
#define SPRD_PMIC_EIC_IE 0x18
|
|
#define SPRD_PMIC_EIC_RIS 0x1c
|
|
#define SPRD_PMIC_EIC_MIS 0x20
|
|
#define SPRD_PMIC_EIC_IC 0x24
|
|
#define SPRD_PMIC_EIC_TRIG 0x28
|
|
#define SPRD_PMIC_EIC_CTRL0 0x40
|
|
|
|
/*
|
|
* The PMIC EIC controller only has one bank, and each bank now can contain
|
|
* 16 EICs.
|
|
*/
|
|
#define SPRD_PMIC_EIC_PER_BANK_NR 16
|
|
#define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR
|
|
#define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0)
|
|
#define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
|
|
#define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0)
|
|
|
|
/*
|
|
* These registers are modified under the irq bus lock and cached to avoid
|
|
* unnecessary writes in bus_sync_unlock.
|
|
*/
|
|
enum {
|
|
REG_IEV,
|
|
REG_IE,
|
|
REG_TRIG,
|
|
CACHE_NR_REGS
|
|
};
|
|
|
|
/**
|
|
* struct sprd_pmic_eic - PMIC EIC controller
|
|
* @chip: the gpio_chip structure.
|
|
* @map: the regmap from the parent device.
|
|
* @offset: the EIC controller's offset address of the PMIC.
|
|
* @reg: the array to cache the EIC registers.
|
|
* @buslock: for bus lock/sync and unlock.
|
|
* @irq: the interrupt number of the PMIC EIC conteroller.
|
|
*/
|
|
struct sprd_pmic_eic {
|
|
struct gpio_chip chip;
|
|
struct regmap *map;
|
|
u32 offset;
|
|
u8 reg[CACHE_NR_REGS];
|
|
struct mutex buslock;
|
|
int irq;
|
|
};
|
|
|
|
static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
|
|
u16 reg, unsigned int val)
|
|
{
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 shift = SPRD_PMIC_EIC_BIT(offset);
|
|
|
|
regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
|
|
BIT(shift), val << shift);
|
|
}
|
|
|
|
static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
|
|
u16 reg)
|
|
{
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 value;
|
|
int ret;
|
|
|
|
ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
|
|
}
|
|
|
|
static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
|
|
}
|
|
|
|
static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
|
|
}
|
|
|
|
static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
/* EICs are always input, nothing need to do here. */
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
/* EICs are always input, nothing need to do here. */
|
|
}
|
|
|
|
static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
|
|
unsigned int offset,
|
|
unsigned int debounce)
|
|
{
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 reg, value;
|
|
int ret;
|
|
|
|
reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
|
|
ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
value &= ~SPRD_PMIC_EIC_DBNC_MASK;
|
|
value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
|
|
return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
|
|
}
|
|
|
|
static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
unsigned long param = pinconf_to_config_param(config);
|
|
u32 arg = pinconf_to_config_argument(config);
|
|
|
|
if (param == PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return sprd_pmic_eic_set_debounce(chip, offset, arg);
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static void sprd_pmic_eic_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
pmic_eic->reg[REG_IE] &= ~BIT(offset);
|
|
pmic_eic->reg[REG_TRIG] &= ~BIT(offset);
|
|
|
|
gpiochip_disable_irq(chip, offset);
|
|
}
|
|
|
|
static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
gpiochip_enable_irq(chip, offset);
|
|
|
|
pmic_eic->reg[REG_IE] |= BIT(offset);
|
|
pmic_eic->reg[REG_TRIG] |= BIT(offset);
|
|
}
|
|
|
|
static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
|
|
unsigned int flow_type)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
|
|
switch (flow_type) {
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pmic_eic->reg[REG_IEV] |= BIT(offset);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pmic_eic->reg[REG_IEV] &= ~BIT(offset);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
/*
|
|
* Will set the trigger level according to current EIC level
|
|
* in irq_bus_sync_unlock() interface, so here nothing to do.
|
|
*/
|
|
break;
|
|
default:
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sprd_pmic_eic_bus_lock(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
|
|
mutex_lock(&pmic_eic->buslock);
|
|
}
|
|
|
|
static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
|
|
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
|
|
u32 trigger = irqd_get_trigger_type(data);
|
|
u32 offset = irqd_to_hwirq(data);
|
|
int state;
|
|
|
|
/* Set irq type */
|
|
if (trigger & IRQ_TYPE_EDGE_BOTH) {
|
|
state = sprd_pmic_eic_get(chip, offset);
|
|
if (state)
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
|
|
else
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
|
|
} else {
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
|
|
!!(pmic_eic->reg[REG_IEV] & BIT(offset)));
|
|
}
|
|
|
|
/* Set irq unmask */
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
|
|
!!(pmic_eic->reg[REG_IE] & BIT(offset)));
|
|
/* Generate trigger start pulse for debounce EIC */
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
|
|
!!(pmic_eic->reg[REG_TRIG] & BIT(offset)));
|
|
|
|
mutex_unlock(&pmic_eic->buslock);
|
|
}
|
|
|
|
static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip,
|
|
unsigned int irq, unsigned int offset)
|
|
{
|
|
u32 trigger = irq_get_trigger_type(irq);
|
|
int state, post_state;
|
|
|
|
if (!(trigger & IRQ_TYPE_EDGE_BOTH))
|
|
return;
|
|
|
|
state = sprd_pmic_eic_get(chip, offset);
|
|
retry:
|
|
if (state)
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
|
|
else
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
|
|
|
|
post_state = sprd_pmic_eic_get(chip, offset);
|
|
if (state != post_state) {
|
|
dev_warn(chip->parent, "PMIC EIC level was changed.\n");
|
|
state = post_state;
|
|
goto retry;
|
|
}
|
|
|
|
/* Set irq unmask */
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1);
|
|
/* Generate trigger start pulse for debounce EIC */
|
|
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1);
|
|
}
|
|
|
|
static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
|
|
{
|
|
struct sprd_pmic_eic *pmic_eic = data;
|
|
struct gpio_chip *chip = &pmic_eic->chip;
|
|
unsigned long status;
|
|
u32 n, girq, val;
|
|
int ret;
|
|
|
|
ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
|
|
&val);
|
|
if (ret)
|
|
return IRQ_RETVAL(ret);
|
|
|
|
status = val & SPRD_PMIC_EIC_DATA_MASK;
|
|
|
|
for_each_set_bit(n, &status, chip->ngpio) {
|
|
/* Clear the interrupt */
|
|
sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
|
|
|
|
girq = irq_find_mapping(chip->irq.domain, n);
|
|
handle_nested_irq(girq);
|
|
|
|
/*
|
|
* The PMIC EIC can only support level trigger, so we can
|
|
* toggle the level trigger to emulate the edge trigger.
|
|
*/
|
|
sprd_pmic_eic_toggle_trigger(chip, girq, n);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct irq_chip pmic_eic_irq_chip = {
|
|
.name = "sprd-pmic-eic",
|
|
.irq_mask = sprd_pmic_eic_irq_mask,
|
|
.irq_unmask = sprd_pmic_eic_irq_unmask,
|
|
.irq_set_type = sprd_pmic_eic_irq_set_type,
|
|
.irq_bus_lock = sprd_pmic_eic_bus_lock,
|
|
.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock,
|
|
.flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_IMMUTABLE,
|
|
GPIOCHIP_IRQ_RESOURCE_HELPERS,
|
|
};
|
|
|
|
static int sprd_pmic_eic_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpio_irq_chip *irq;
|
|
struct sprd_pmic_eic *pmic_eic;
|
|
int ret;
|
|
|
|
pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
|
|
if (!pmic_eic)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&pmic_eic->buslock);
|
|
|
|
pmic_eic->irq = platform_get_irq(pdev, 0);
|
|
if (pmic_eic->irq < 0)
|
|
return pmic_eic->irq;
|
|
|
|
pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!pmic_eic->map)
|
|
return -ENODEV;
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
|
|
sprd_pmic_eic_irq_handler,
|
|
IRQF_ONESHOT | IRQF_NO_SUSPEND,
|
|
dev_name(&pdev->dev), pmic_eic);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
|
|
return ret;
|
|
}
|
|
|
|
pmic_eic->chip.label = dev_name(&pdev->dev);
|
|
pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
|
|
pmic_eic->chip.base = -1;
|
|
pmic_eic->chip.parent = &pdev->dev;
|
|
pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
|
|
pmic_eic->chip.request = sprd_pmic_eic_request;
|
|
pmic_eic->chip.free = sprd_pmic_eic_free;
|
|
pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
|
|
pmic_eic->chip.set = sprd_pmic_eic_set;
|
|
pmic_eic->chip.get = sprd_pmic_eic_get;
|
|
pmic_eic->chip.can_sleep = true;
|
|
|
|
irq = &pmic_eic->chip.irq;
|
|
gpio_irq_chip_set_chip(irq, &pmic_eic_irq_chip);
|
|
irq->threaded = true;
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sprd_pmic_eic_of_match[] = {
|
|
{ .compatible = "sprd,sc2731-eic", },
|
|
{ /* end of list */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
|
|
|
|
static struct platform_driver sprd_pmic_eic_driver = {
|
|
.probe = sprd_pmic_eic_probe,
|
|
.driver = {
|
|
.name = "sprd-pmic-eic",
|
|
.of_match_table = sprd_pmic_eic_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sprd_pmic_eic_driver);
|
|
|
|
MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
|
|
MODULE_LICENSE("GPL v2");
|