mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 17:24:17 +08:00
b82162bcd2
Now struct musb has the timer (dev_timer) for glue drivers, so let's remove the duplicated timer defined in dsps glue driver, and use dev_timer defined in struct musb. Signed-off-by: Bin Liu <b-liu@ti.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1094 lines
27 KiB
C
1094 lines
27 KiB
C
/*
|
|
* Texas Instruments DSPS platforms "glue layer"
|
|
*
|
|
* Copyright (C) 2012, by Texas Instruments
|
|
*
|
|
* Based on the am35x "glue layer" code.
|
|
*
|
|
* This file is part of the Inventra Controller Driver for Linux.
|
|
*
|
|
* The Inventra Controller Driver for Linux is free software; you
|
|
* can redistribute it and/or modify it under the terms of the GNU
|
|
* General Public License version 2 as published by the Free Software
|
|
* Foundation.
|
|
*
|
|
* The Inventra Controller Driver for Linux is distributed in
|
|
* the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
|
* without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
|
|
* License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with The Inventra Controller Driver for Linux ; if not,
|
|
* write to the Free Software Foundation, Inc., 59 Temple Place,
|
|
* Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* musb_dsps.c will be a common file for all the TI DSPS platforms
|
|
* such as dm64x, dm36x, dm35x, da8x, am35x and ti81x.
|
|
* For now only ti81x is using this and in future davinci.c, am35x.c
|
|
* da8xx.c would be merged to this file after testing.
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/module.h>
|
|
#include <linux/usb/usb_phy_generic.h>
|
|
#include <linux/platform_data/usb-omap.h>
|
|
#include <linux/sizes.h>
|
|
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/usb/of.h>
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
#include "musb_core.h"
|
|
|
|
static const struct of_device_id musb_dsps_of_match[];
|
|
|
|
/**
|
|
* DSPS musb wrapper register offset.
|
|
* FIXME: This should be expanded to have all the wrapper registers from TI DSPS
|
|
* musb ips.
|
|
*/
|
|
struct dsps_musb_wrapper {
|
|
u16 revision;
|
|
u16 control;
|
|
u16 status;
|
|
u16 epintr_set;
|
|
u16 epintr_clear;
|
|
u16 epintr_status;
|
|
u16 coreintr_set;
|
|
u16 coreintr_clear;
|
|
u16 coreintr_status;
|
|
u16 phy_utmi;
|
|
u16 mode;
|
|
u16 tx_mode;
|
|
u16 rx_mode;
|
|
|
|
/* bit positions for control */
|
|
unsigned reset:5;
|
|
|
|
/* bit positions for interrupt */
|
|
unsigned usb_shift:5;
|
|
u32 usb_mask;
|
|
u32 usb_bitmap;
|
|
unsigned drvvbus:5;
|
|
|
|
unsigned txep_shift:5;
|
|
u32 txep_mask;
|
|
u32 txep_bitmap;
|
|
|
|
unsigned rxep_shift:5;
|
|
u32 rxep_mask;
|
|
u32 rxep_bitmap;
|
|
|
|
/* bit positions for phy_utmi */
|
|
unsigned otg_disable:5;
|
|
|
|
/* bit positions for mode */
|
|
unsigned iddig:5;
|
|
unsigned iddig_mux:5;
|
|
/* miscellaneous stuff */
|
|
unsigned poll_timeout;
|
|
};
|
|
|
|
/*
|
|
* register shadow for suspend
|
|
*/
|
|
struct dsps_context {
|
|
u32 control;
|
|
u32 epintr;
|
|
u32 coreintr;
|
|
u32 phy_utmi;
|
|
u32 mode;
|
|
u32 tx_mode;
|
|
u32 rx_mode;
|
|
};
|
|
|
|
/**
|
|
* DSPS glue structure.
|
|
*/
|
|
struct dsps_glue {
|
|
struct device *dev;
|
|
struct platform_device *musb; /* child musb pdev */
|
|
const struct dsps_musb_wrapper *wrp; /* wrapper register offsets */
|
|
int vbus_irq; /* optional vbus irq */
|
|
unsigned long last_timer; /* last timer data for each instance */
|
|
bool sw_babble_enabled;
|
|
void __iomem *usbss_base;
|
|
|
|
struct dsps_context context;
|
|
struct debugfs_regset32 regset;
|
|
struct dentry *dbgfs_root;
|
|
};
|
|
|
|
static const struct debugfs_reg32 dsps_musb_regs[] = {
|
|
{ "revision", 0x00 },
|
|
{ "control", 0x14 },
|
|
{ "status", 0x18 },
|
|
{ "eoi", 0x24 },
|
|
{ "intr0_stat", 0x30 },
|
|
{ "intr1_stat", 0x34 },
|
|
{ "intr0_set", 0x38 },
|
|
{ "intr1_set", 0x3c },
|
|
{ "txmode", 0x70 },
|
|
{ "rxmode", 0x74 },
|
|
{ "autoreq", 0xd0 },
|
|
{ "srpfixtime", 0xd4 },
|
|
{ "tdown", 0xd8 },
|
|
{ "phy_utmi", 0xe0 },
|
|
{ "mode", 0xe8 },
|
|
};
|
|
|
|
static void dsps_mod_timer(struct dsps_glue *glue, int wait_ms)
|
|
{
|
|
struct musb *musb = platform_get_drvdata(glue->musb);
|
|
int wait;
|
|
|
|
if (wait_ms < 0)
|
|
wait = msecs_to_jiffies(glue->wrp->poll_timeout);
|
|
else
|
|
wait = msecs_to_jiffies(wait_ms);
|
|
|
|
mod_timer(&musb->dev_timer, jiffies + wait);
|
|
}
|
|
|
|
/*
|
|
* If no vbus irq from the PMIC is configured, we need to poll VBUS status.
|
|
*/
|
|
static void dsps_mod_timer_optional(struct dsps_glue *glue)
|
|
{
|
|
if (glue->vbus_irq)
|
|
return;
|
|
|
|
dsps_mod_timer(glue, -1);
|
|
}
|
|
|
|
/* USBSS / USB AM335x */
|
|
#define USBSS_IRQ_STATUS 0x28
|
|
#define USBSS_IRQ_ENABLER 0x2c
|
|
#define USBSS_IRQ_CLEARR 0x30
|
|
|
|
#define USBSS_IRQ_PD_COMP (1 << 2)
|
|
|
|
/**
|
|
* dsps_musb_enable - enable interrupts
|
|
*/
|
|
static void dsps_musb_enable(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
u32 epmask, coremask;
|
|
|
|
/* Workaround: setup IRQs through both register sets. */
|
|
epmask = ((musb->epmask & wrp->txep_mask) << wrp->txep_shift) |
|
|
((musb->epmask & wrp->rxep_mask) << wrp->rxep_shift);
|
|
coremask = (wrp->usb_bitmap & ~MUSB_INTR_SOF);
|
|
|
|
musb_writel(reg_base, wrp->epintr_set, epmask);
|
|
musb_writel(reg_base, wrp->coreintr_set, coremask);
|
|
/* start polling for ID change in dual-role idle mode */
|
|
if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
|
|
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
|
|
dsps_mod_timer(glue, -1);
|
|
}
|
|
|
|
/**
|
|
* dsps_musb_disable - disable HDRC and flush interrupts
|
|
*/
|
|
static void dsps_musb_disable(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct platform_device *pdev = to_platform_device(dev->parent);
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
|
|
musb_writel(reg_base, wrp->coreintr_clear, wrp->usb_bitmap);
|
|
musb_writel(reg_base, wrp->epintr_clear,
|
|
wrp->txep_bitmap | wrp->rxep_bitmap);
|
|
del_timer_sync(&musb->dev_timer);
|
|
}
|
|
|
|
/* Caller must take musb->lock */
|
|
static int dsps_check_status(struct musb *musb, void *unused)
|
|
{
|
|
void __iomem *mregs = musb->mregs;
|
|
struct device *dev = musb->controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
u8 devctl;
|
|
int skip_session = 0;
|
|
|
|
if (glue->vbus_irq)
|
|
del_timer(&musb->dev_timer);
|
|
|
|
/*
|
|
* We poll because DSPS IP's won't expose several OTG-critical
|
|
* status change events (from the transceiver) otherwise.
|
|
*/
|
|
devctl = musb_readb(mregs, MUSB_DEVCTL);
|
|
dev_dbg(musb->controller, "Poll devctl %02x (%s)\n", devctl,
|
|
usb_otg_state_string(musb->xceiv->otg->state));
|
|
|
|
switch (musb->xceiv->otg->state) {
|
|
case OTG_STATE_A_WAIT_VRISE:
|
|
dsps_mod_timer_optional(glue);
|
|
break;
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
/* keep VBUS on for host-only mode */
|
|
if (musb->port_mode == MUSB_PORT_MODE_HOST) {
|
|
dsps_mod_timer_optional(glue);
|
|
break;
|
|
}
|
|
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
|
|
skip_session = 1;
|
|
/* fall */
|
|
|
|
case OTG_STATE_A_IDLE:
|
|
case OTG_STATE_B_IDLE:
|
|
if (!glue->vbus_irq) {
|
|
if (devctl & MUSB_DEVCTL_BDEVICE) {
|
|
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
|
|
MUSB_DEV_MODE(musb);
|
|
} else {
|
|
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
|
|
MUSB_HST_MODE(musb);
|
|
}
|
|
if (!(devctl & MUSB_DEVCTL_SESSION) && !skip_session)
|
|
musb_writeb(mregs, MUSB_DEVCTL,
|
|
MUSB_DEVCTL_SESSION);
|
|
}
|
|
dsps_mod_timer_optional(glue);
|
|
break;
|
|
case OTG_STATE_A_WAIT_VFALL:
|
|
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
|
|
musb_writel(musb->ctrl_base, wrp->coreintr_set,
|
|
MUSB_INTR_VBUSERROR << wrp->usb_shift);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void otg_timer(struct timer_list *t)
|
|
{
|
|
struct musb *musb = from_timer(musb, t, dev_timer);
|
|
struct device *dev = musb->controller;
|
|
unsigned long flags;
|
|
int err;
|
|
|
|
err = pm_runtime_get(dev);
|
|
if ((err != -EINPROGRESS) && err < 0) {
|
|
dev_err(dev, "Poll could not pm_runtime_get: %i\n", err);
|
|
pm_runtime_put_noidle(dev);
|
|
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
err = musb_queue_resume_work(musb, dsps_check_status, NULL);
|
|
if (err < 0)
|
|
dev_err(dev, "%s resume work: %i\n", __func__, err);
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
pm_runtime_mark_last_busy(dev);
|
|
pm_runtime_put_autosuspend(dev);
|
|
}
|
|
|
|
static void dsps_musb_clear_ep_rxintr(struct musb *musb, int epnum)
|
|
{
|
|
u32 epintr;
|
|
struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
|
|
/* musb->lock might already been held */
|
|
epintr = (1 << epnum) << wrp->rxep_shift;
|
|
musb_writel(musb->ctrl_base, wrp->epintr_status, epintr);
|
|
}
|
|
|
|
static irqreturn_t dsps_interrupt(int irq, void *hci)
|
|
{
|
|
struct musb *musb = hci;
|
|
void __iomem *reg_base = musb->ctrl_base;
|
|
struct device *dev = musb->controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
unsigned long flags;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 epintr, usbintr;
|
|
|
|
spin_lock_irqsave(&musb->lock, flags);
|
|
|
|
/* Get endpoint interrupts */
|
|
epintr = musb_readl(reg_base, wrp->epintr_status);
|
|
musb->int_rx = (epintr & wrp->rxep_bitmap) >> wrp->rxep_shift;
|
|
musb->int_tx = (epintr & wrp->txep_bitmap) >> wrp->txep_shift;
|
|
|
|
if (epintr)
|
|
musb_writel(reg_base, wrp->epintr_status, epintr);
|
|
|
|
/* Get usb core interrupts */
|
|
usbintr = musb_readl(reg_base, wrp->coreintr_status);
|
|
if (!usbintr && !epintr)
|
|
goto out;
|
|
|
|
musb->int_usb = (usbintr & wrp->usb_bitmap) >> wrp->usb_shift;
|
|
if (usbintr)
|
|
musb_writel(reg_base, wrp->coreintr_status, usbintr);
|
|
|
|
dev_dbg(musb->controller, "usbintr (%x) epintr(%x)\n",
|
|
usbintr, epintr);
|
|
|
|
if (usbintr & ((1 << wrp->drvvbus) << wrp->usb_shift)) {
|
|
int drvvbus = musb_readl(reg_base, wrp->status);
|
|
void __iomem *mregs = musb->mregs;
|
|
u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
|
|
int err;
|
|
|
|
err = musb->int_usb & MUSB_INTR_VBUSERROR;
|
|
if (err) {
|
|
/*
|
|
* The Mentor core doesn't debounce VBUS as needed
|
|
* to cope with device connect current spikes. This
|
|
* means it's not uncommon for bus-powered devices
|
|
* to get VBUS errors during enumeration.
|
|
*
|
|
* This is a workaround, but newer RTL from Mentor
|
|
* seems to allow a better one: "re"-starting sessions
|
|
* without waiting for VBUS to stop registering in
|
|
* devctl.
|
|
*/
|
|
musb->int_usb &= ~MUSB_INTR_VBUSERROR;
|
|
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VFALL;
|
|
dsps_mod_timer_optional(glue);
|
|
WARNING("VBUS error workaround (delay coming)\n");
|
|
} else if (drvvbus) {
|
|
MUSB_HST_MODE(musb);
|
|
musb->xceiv->otg->default_a = 1;
|
|
musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE;
|
|
dsps_mod_timer_optional(glue);
|
|
} else {
|
|
musb->is_active = 0;
|
|
MUSB_DEV_MODE(musb);
|
|
musb->xceiv->otg->default_a = 0;
|
|
musb->xceiv->otg->state = OTG_STATE_B_IDLE;
|
|
}
|
|
|
|
/* NOTE: this must complete power-on within 100 ms. */
|
|
dev_dbg(musb->controller, "VBUS %s (%s)%s, devctl %02x\n",
|
|
drvvbus ? "on" : "off",
|
|
usb_otg_state_string(musb->xceiv->otg->state),
|
|
err ? " ERROR" : "",
|
|
devctl);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if (musb->int_tx || musb->int_rx || musb->int_usb)
|
|
ret |= musb_interrupt(musb);
|
|
|
|
/* Poll for ID change and connect */
|
|
switch (musb->xceiv->otg->state) {
|
|
case OTG_STATE_B_IDLE:
|
|
case OTG_STATE_A_WAIT_BCON:
|
|
dsps_mod_timer_optional(glue);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&musb->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue)
|
|
{
|
|
struct dentry *root;
|
|
struct dentry *file;
|
|
char buf[128];
|
|
|
|
sprintf(buf, "%s.dsps", dev_name(musb->controller));
|
|
root = debugfs_create_dir(buf, NULL);
|
|
if (!root)
|
|
return -ENOMEM;
|
|
glue->dbgfs_root = root;
|
|
|
|
glue->regset.regs = dsps_musb_regs;
|
|
glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs);
|
|
glue->regset.base = musb->ctrl_base;
|
|
|
|
file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset);
|
|
if (!file) {
|
|
debugfs_remove_recursive(root);
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int dsps_musb_init(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
|
|
struct platform_device *parent = to_platform_device(dev->parent);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
void __iomem *reg_base;
|
|
struct resource *r;
|
|
u32 rev, val;
|
|
int ret;
|
|
|
|
r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control");
|
|
reg_base = devm_ioremap_resource(dev, r);
|
|
if (IS_ERR(reg_base))
|
|
return PTR_ERR(reg_base);
|
|
musb->ctrl_base = reg_base;
|
|
|
|
/* NOP driver needs change if supporting dual instance */
|
|
musb->xceiv = devm_usb_get_phy_by_phandle(dev->parent, "phys", 0);
|
|
if (IS_ERR(musb->xceiv))
|
|
return PTR_ERR(musb->xceiv);
|
|
|
|
musb->phy = devm_phy_get(dev->parent, "usb2-phy");
|
|
|
|
/* Returns zero if e.g. not clocked */
|
|
rev = musb_readl(reg_base, wrp->revision);
|
|
if (!rev)
|
|
return -ENODEV;
|
|
|
|
usb_phy_init(musb->xceiv);
|
|
if (IS_ERR(musb->phy)) {
|
|
musb->phy = NULL;
|
|
} else {
|
|
ret = phy_init(musb->phy);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = phy_power_on(musb->phy);
|
|
if (ret) {
|
|
phy_exit(musb->phy);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
timer_setup(&musb->dev_timer, otg_timer, 0);
|
|
|
|
/* Reset the musb */
|
|
musb_writel(reg_base, wrp->control, (1 << wrp->reset));
|
|
|
|
musb->isr = dsps_interrupt;
|
|
|
|
/* reset the otgdisable bit, needed for host mode to work */
|
|
val = musb_readl(reg_base, wrp->phy_utmi);
|
|
val &= ~(1 << wrp->otg_disable);
|
|
musb_writel(musb->ctrl_base, wrp->phy_utmi, val);
|
|
|
|
/*
|
|
* Check whether the dsps version has babble control enabled.
|
|
* In latest silicon revision the babble control logic is enabled.
|
|
* If MUSB_BABBLE_CTL returns 0x4 then we have the babble control
|
|
* logic enabled.
|
|
*/
|
|
val = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
|
|
if (val & MUSB_BABBLE_RCV_DISABLE) {
|
|
glue->sw_babble_enabled = true;
|
|
val |= MUSB_BABBLE_SW_SESSION_CTRL;
|
|
musb_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
|
|
}
|
|
|
|
dsps_mod_timer(glue, -1);
|
|
|
|
return dsps_musb_dbg_init(musb, glue);
|
|
}
|
|
|
|
static int dsps_musb_exit(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
|
|
|
|
del_timer_sync(&musb->dev_timer);
|
|
usb_phy_shutdown(musb->xceiv);
|
|
phy_power_off(musb->phy);
|
|
phy_exit(musb->phy);
|
|
debugfs_remove_recursive(glue->dbgfs_root);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsps_musb_set_mode(struct musb *musb, u8 mode)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
void __iomem *ctrl_base = musb->ctrl_base;
|
|
u32 reg;
|
|
|
|
reg = musb_readl(ctrl_base, wrp->mode);
|
|
|
|
switch (mode) {
|
|
case MUSB_HOST:
|
|
reg &= ~(1 << wrp->iddig);
|
|
|
|
/*
|
|
* if we're setting mode to host-only or device-only, we're
|
|
* going to ignore whatever the PHY sends us and just force
|
|
* ID pin status by SW
|
|
*/
|
|
reg |= (1 << wrp->iddig_mux);
|
|
|
|
musb_writel(ctrl_base, wrp->mode, reg);
|
|
musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
|
|
break;
|
|
case MUSB_PERIPHERAL:
|
|
reg |= (1 << wrp->iddig);
|
|
|
|
/*
|
|
* if we're setting mode to host-only or device-only, we're
|
|
* going to ignore whatever the PHY sends us and just force
|
|
* ID pin status by SW
|
|
*/
|
|
reg |= (1 << wrp->iddig_mux);
|
|
|
|
musb_writel(ctrl_base, wrp->mode, reg);
|
|
break;
|
|
case MUSB_OTG:
|
|
musb_writel(ctrl_base, wrp->phy_utmi, 0x02);
|
|
break;
|
|
default:
|
|
dev_err(glue->dev, "unsupported mode %d\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool dsps_sw_babble_control(struct musb *musb)
|
|
{
|
|
u8 babble_ctl;
|
|
bool session_restart = false;
|
|
|
|
babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
|
|
dev_dbg(musb->controller, "babble: MUSB_BABBLE_CTL value %x\n",
|
|
babble_ctl);
|
|
/*
|
|
* check line monitor flag to check whether babble is
|
|
* due to noise
|
|
*/
|
|
dev_dbg(musb->controller, "STUCK_J is %s\n",
|
|
babble_ctl & MUSB_BABBLE_STUCK_J ? "set" : "reset");
|
|
|
|
if (babble_ctl & MUSB_BABBLE_STUCK_J) {
|
|
int timeout = 10;
|
|
|
|
/*
|
|
* babble is due to noise, then set transmit idle (d7 bit)
|
|
* to resume normal operation
|
|
*/
|
|
babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
|
|
babble_ctl |= MUSB_BABBLE_FORCE_TXIDLE;
|
|
musb_writeb(musb->mregs, MUSB_BABBLE_CTL, babble_ctl);
|
|
|
|
/* wait till line monitor flag cleared */
|
|
dev_dbg(musb->controller, "Set TXIDLE, wait J to clear\n");
|
|
do {
|
|
babble_ctl = musb_readb(musb->mregs, MUSB_BABBLE_CTL);
|
|
udelay(1);
|
|
} while ((babble_ctl & MUSB_BABBLE_STUCK_J) && timeout--);
|
|
|
|
/* check whether stuck_at_j bit cleared */
|
|
if (babble_ctl & MUSB_BABBLE_STUCK_J) {
|
|
/*
|
|
* real babble condition has occurred
|
|
* restart the controller to start the
|
|
* session again
|
|
*/
|
|
dev_dbg(musb->controller, "J not cleared, misc (%x)\n",
|
|
babble_ctl);
|
|
session_restart = true;
|
|
}
|
|
} else {
|
|
session_restart = true;
|
|
}
|
|
|
|
return session_restart;
|
|
}
|
|
|
|
static int dsps_musb_recover(struct musb *musb)
|
|
{
|
|
struct device *dev = musb->controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(dev->parent);
|
|
int session_restart = 0;
|
|
|
|
if (glue->sw_babble_enabled)
|
|
session_restart = dsps_sw_babble_control(musb);
|
|
else
|
|
session_restart = 1;
|
|
|
|
return session_restart ? 0 : -EPIPE;
|
|
}
|
|
|
|
/* Similar to am35x, dm81xx support only 32-bit read operation */
|
|
static void dsps_read_fifo32(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
|
|
{
|
|
void __iomem *fifo = hw_ep->fifo;
|
|
|
|
if (len >= 4) {
|
|
ioread32_rep(fifo, dst, len >> 2);
|
|
dst += len & ~0x03;
|
|
len &= 0x03;
|
|
}
|
|
|
|
/* Read any remaining 1 to 3 bytes */
|
|
if (len > 0) {
|
|
u32 val = musb_readl(fifo, 0);
|
|
memcpy(dst, &val, len);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_USB_TI_CPPI41_DMA
|
|
static void dsps_dma_controller_callback(struct dma_controller *c)
|
|
{
|
|
struct musb *musb = c->musb;
|
|
struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
|
|
void __iomem *usbss_base = glue->usbss_base;
|
|
u32 status;
|
|
|
|
status = musb_readl(usbss_base, USBSS_IRQ_STATUS);
|
|
if (status & USBSS_IRQ_PD_COMP)
|
|
musb_writel(usbss_base, USBSS_IRQ_STATUS, USBSS_IRQ_PD_COMP);
|
|
}
|
|
|
|
static struct dma_controller *
|
|
dsps_dma_controller_create(struct musb *musb, void __iomem *base)
|
|
{
|
|
struct dma_controller *controller;
|
|
struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
|
|
void __iomem *usbss_base = glue->usbss_base;
|
|
|
|
controller = cppi41_dma_controller_create(musb, base);
|
|
if (IS_ERR_OR_NULL(controller))
|
|
return controller;
|
|
|
|
musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
|
|
controller->dma_callback = dsps_dma_controller_callback;
|
|
|
|
return controller;
|
|
}
|
|
|
|
static void dsps_dma_controller_destroy(struct dma_controller *c)
|
|
{
|
|
struct musb *musb = c->musb;
|
|
struct dsps_glue *glue = dev_get_drvdata(musb->controller->parent);
|
|
void __iomem *usbss_base = glue->usbss_base;
|
|
|
|
musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
|
|
cppi41_dma_controller_destroy(c);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void dsps_dma_controller_suspend(struct dsps_glue *glue)
|
|
{
|
|
void __iomem *usbss_base = glue->usbss_base;
|
|
|
|
musb_writel(usbss_base, USBSS_IRQ_CLEARR, USBSS_IRQ_PD_COMP);
|
|
}
|
|
|
|
static void dsps_dma_controller_resume(struct dsps_glue *glue)
|
|
{
|
|
void __iomem *usbss_base = glue->usbss_base;
|
|
|
|
musb_writel(usbss_base, USBSS_IRQ_ENABLER, USBSS_IRQ_PD_COMP);
|
|
}
|
|
#endif
|
|
#else /* CONFIG_USB_TI_CPPI41_DMA */
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void dsps_dma_controller_suspend(struct dsps_glue *glue) {}
|
|
static void dsps_dma_controller_resume(struct dsps_glue *glue) {}
|
|
#endif
|
|
#endif /* CONFIG_USB_TI_CPPI41_DMA */
|
|
|
|
static struct musb_platform_ops dsps_ops = {
|
|
.quirks = MUSB_DMA_CPPI41 | MUSB_INDEXED_EP,
|
|
.init = dsps_musb_init,
|
|
.exit = dsps_musb_exit,
|
|
|
|
#ifdef CONFIG_USB_TI_CPPI41_DMA
|
|
.dma_init = dsps_dma_controller_create,
|
|
.dma_exit = dsps_dma_controller_destroy,
|
|
#endif
|
|
.enable = dsps_musb_enable,
|
|
.disable = dsps_musb_disable,
|
|
|
|
.set_mode = dsps_musb_set_mode,
|
|
.recover = dsps_musb_recover,
|
|
.clear_ep_rxintr = dsps_musb_clear_ep_rxintr,
|
|
};
|
|
|
|
static u64 musb_dmamask = DMA_BIT_MASK(32);
|
|
|
|
static int get_int_prop(struct device_node *dn, const char *s)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = of_property_read_u32(dn, s, &val);
|
|
if (ret)
|
|
return 0;
|
|
return val;
|
|
}
|
|
|
|
static int get_musb_port_mode(struct device *dev)
|
|
{
|
|
enum usb_dr_mode mode;
|
|
|
|
mode = usb_get_dr_mode(dev);
|
|
switch (mode) {
|
|
case USB_DR_MODE_HOST:
|
|
return MUSB_PORT_MODE_HOST;
|
|
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
return MUSB_PORT_MODE_GADGET;
|
|
|
|
case USB_DR_MODE_UNKNOWN:
|
|
case USB_DR_MODE_OTG:
|
|
default:
|
|
return MUSB_PORT_MODE_DUAL_ROLE;
|
|
}
|
|
}
|
|
|
|
static int dsps_create_musb_pdev(struct dsps_glue *glue,
|
|
struct platform_device *parent)
|
|
{
|
|
struct musb_hdrc_platform_data pdata;
|
|
struct resource resources[2];
|
|
struct resource *res;
|
|
struct device *dev = &parent->dev;
|
|
struct musb_hdrc_config *config;
|
|
struct platform_device *musb;
|
|
struct device_node *dn = parent->dev.of_node;
|
|
int ret, val;
|
|
|
|
memset(resources, 0, sizeof(resources));
|
|
res = platform_get_resource_byname(parent, IORESOURCE_MEM, "mc");
|
|
if (!res) {
|
|
dev_err(dev, "failed to get memory.\n");
|
|
return -EINVAL;
|
|
}
|
|
resources[0] = *res;
|
|
|
|
res = platform_get_resource_byname(parent, IORESOURCE_IRQ, "mc");
|
|
if (!res) {
|
|
dev_err(dev, "failed to get irq.\n");
|
|
return -EINVAL;
|
|
}
|
|
resources[1] = *res;
|
|
|
|
/* allocate the child platform device */
|
|
musb = platform_device_alloc("musb-hdrc",
|
|
(resources[0].start & 0xFFF) == 0x400 ? 0 : 1);
|
|
if (!musb) {
|
|
dev_err(dev, "failed to allocate musb device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
musb->dev.parent = dev;
|
|
musb->dev.dma_mask = &musb_dmamask;
|
|
musb->dev.coherent_dma_mask = musb_dmamask;
|
|
|
|
glue->musb = musb;
|
|
|
|
ret = platform_device_add_resources(musb, resources,
|
|
ARRAY_SIZE(resources));
|
|
if (ret) {
|
|
dev_err(dev, "failed to add resources\n");
|
|
goto err;
|
|
}
|
|
|
|
config = devm_kzalloc(&parent->dev, sizeof(*config), GFP_KERNEL);
|
|
if (!config) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
pdata.config = config;
|
|
pdata.platform_ops = &dsps_ops;
|
|
|
|
config->num_eps = get_int_prop(dn, "mentor,num-eps");
|
|
config->ram_bits = get_int_prop(dn, "mentor,ram-bits");
|
|
config->host_port_deassert_reset_at_resume = 1;
|
|
pdata.mode = get_musb_port_mode(dev);
|
|
/* DT keeps this entry in mA, musb expects it as per USB spec */
|
|
pdata.power = get_int_prop(dn, "mentor,power") / 2;
|
|
|
|
ret = of_property_read_u32(dn, "mentor,multipoint", &val);
|
|
if (!ret && val)
|
|
config->multipoint = true;
|
|
|
|
config->maximum_speed = usb_get_maximum_speed(&parent->dev);
|
|
switch (config->maximum_speed) {
|
|
case USB_SPEED_LOW:
|
|
case USB_SPEED_FULL:
|
|
break;
|
|
case USB_SPEED_SUPER:
|
|
dev_warn(dev, "ignore incorrect maximum_speed "
|
|
"(super-speed) setting in dts");
|
|
/* fall through */
|
|
default:
|
|
config->maximum_speed = USB_SPEED_HIGH;
|
|
}
|
|
|
|
ret = platform_device_add_data(musb, &pdata, sizeof(pdata));
|
|
if (ret) {
|
|
dev_err(dev, "failed to add platform_data\n");
|
|
goto err;
|
|
}
|
|
|
|
ret = platform_device_add(musb);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register musb device\n");
|
|
goto err;
|
|
}
|
|
return 0;
|
|
|
|
err:
|
|
platform_device_put(musb);
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t dsps_vbus_threaded_irq(int irq, void *priv)
|
|
{
|
|
struct dsps_glue *glue = priv;
|
|
struct musb *musb = platform_get_drvdata(glue->musb);
|
|
|
|
if (!musb)
|
|
return IRQ_NONE;
|
|
|
|
dev_dbg(glue->dev, "VBUS interrupt\n");
|
|
dsps_mod_timer(glue, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int dsps_setup_optional_vbus_irq(struct platform_device *pdev,
|
|
struct dsps_glue *glue)
|
|
{
|
|
int error;
|
|
|
|
glue->vbus_irq = platform_get_irq_byname(pdev, "vbus");
|
|
if (glue->vbus_irq == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
|
|
if (glue->vbus_irq <= 0) {
|
|
glue->vbus_irq = 0;
|
|
return 0;
|
|
}
|
|
|
|
error = devm_request_threaded_irq(glue->dev, glue->vbus_irq,
|
|
NULL, dsps_vbus_threaded_irq,
|
|
IRQF_ONESHOT,
|
|
"vbus", glue);
|
|
if (error) {
|
|
glue->vbus_irq = 0;
|
|
return error;
|
|
}
|
|
dev_dbg(glue->dev, "VBUS irq %i configured\n", glue->vbus_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsps_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
const struct dsps_musb_wrapper *wrp;
|
|
struct dsps_glue *glue;
|
|
int ret;
|
|
|
|
if (!strcmp(pdev->name, "musb-hdrc"))
|
|
return -ENODEV;
|
|
|
|
match = of_match_node(musb_dsps_of_match, pdev->dev.of_node);
|
|
if (!match) {
|
|
dev_err(&pdev->dev, "fail to get matching of_match struct\n");
|
|
return -EINVAL;
|
|
}
|
|
wrp = match->data;
|
|
|
|
if (of_device_is_compatible(pdev->dev.of_node, "ti,musb-dm816"))
|
|
dsps_ops.read_fifo = dsps_read_fifo32;
|
|
|
|
/* allocate glue */
|
|
glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
|
|
if (!glue)
|
|
return -ENOMEM;
|
|
|
|
glue->dev = &pdev->dev;
|
|
glue->wrp = wrp;
|
|
glue->usbss_base = of_iomap(pdev->dev.parent->of_node, 0);
|
|
if (!glue->usbss_base)
|
|
return -ENXIO;
|
|
|
|
if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
|
|
ret = dsps_setup_optional_vbus_irq(pdev, glue);
|
|
if (ret)
|
|
goto err_iounmap;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, glue);
|
|
pm_runtime_enable(&pdev->dev);
|
|
ret = dsps_create_musb_pdev(glue, pdev);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
pm_runtime_disable(&pdev->dev);
|
|
err_iounmap:
|
|
iounmap(glue->usbss_base);
|
|
return ret;
|
|
}
|
|
|
|
static int dsps_remove(struct platform_device *pdev)
|
|
{
|
|
struct dsps_glue *glue = platform_get_drvdata(pdev);
|
|
|
|
platform_device_unregister(glue->musb);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
iounmap(glue->usbss_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dsps_musb_wrapper am33xx_driver_data = {
|
|
.revision = 0x00,
|
|
.control = 0x14,
|
|
.status = 0x18,
|
|
.epintr_set = 0x38,
|
|
.epintr_clear = 0x40,
|
|
.epintr_status = 0x30,
|
|
.coreintr_set = 0x3c,
|
|
.coreintr_clear = 0x44,
|
|
.coreintr_status = 0x34,
|
|
.phy_utmi = 0xe0,
|
|
.mode = 0xe8,
|
|
.tx_mode = 0x70,
|
|
.rx_mode = 0x74,
|
|
.reset = 0,
|
|
.otg_disable = 21,
|
|
.iddig = 8,
|
|
.iddig_mux = 7,
|
|
.usb_shift = 0,
|
|
.usb_mask = 0x1ff,
|
|
.usb_bitmap = (0x1ff << 0),
|
|
.drvvbus = 8,
|
|
.txep_shift = 0,
|
|
.txep_mask = 0xffff,
|
|
.txep_bitmap = (0xffff << 0),
|
|
.rxep_shift = 16,
|
|
.rxep_mask = 0xfffe,
|
|
.rxep_bitmap = (0xfffe << 16),
|
|
.poll_timeout = 2000, /* ms */
|
|
};
|
|
|
|
static const struct of_device_id musb_dsps_of_match[] = {
|
|
{ .compatible = "ti,musb-am33xx",
|
|
.data = &am33xx_driver_data, },
|
|
{ .compatible = "ti,musb-dm816",
|
|
.data = &am33xx_driver_data, },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, musb_dsps_of_match);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int dsps_suspend(struct device *dev)
|
|
{
|
|
struct dsps_glue *glue = dev_get_drvdata(dev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
struct musb *musb = platform_get_drvdata(glue->musb);
|
|
void __iomem *mbase;
|
|
int ret;
|
|
|
|
if (!musb)
|
|
/* This can happen if the musb device is in -EPROBE_DEFER */
|
|
return 0;
|
|
|
|
ret = pm_runtime_get_sync(dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(dev);
|
|
return ret;
|
|
}
|
|
|
|
del_timer_sync(&musb->dev_timer);
|
|
|
|
mbase = musb->ctrl_base;
|
|
glue->context.control = musb_readl(mbase, wrp->control);
|
|
glue->context.epintr = musb_readl(mbase, wrp->epintr_set);
|
|
glue->context.coreintr = musb_readl(mbase, wrp->coreintr_set);
|
|
glue->context.phy_utmi = musb_readl(mbase, wrp->phy_utmi);
|
|
glue->context.mode = musb_readl(mbase, wrp->mode);
|
|
glue->context.tx_mode = musb_readl(mbase, wrp->tx_mode);
|
|
glue->context.rx_mode = musb_readl(mbase, wrp->rx_mode);
|
|
|
|
dsps_dma_controller_suspend(glue);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsps_resume(struct device *dev)
|
|
{
|
|
struct dsps_glue *glue = dev_get_drvdata(dev);
|
|
const struct dsps_musb_wrapper *wrp = glue->wrp;
|
|
struct musb *musb = platform_get_drvdata(glue->musb);
|
|
void __iomem *mbase;
|
|
|
|
if (!musb)
|
|
return 0;
|
|
|
|
dsps_dma_controller_resume(glue);
|
|
|
|
mbase = musb->ctrl_base;
|
|
musb_writel(mbase, wrp->control, glue->context.control);
|
|
musb_writel(mbase, wrp->epintr_set, glue->context.epintr);
|
|
musb_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
|
|
musb_writel(mbase, wrp->phy_utmi, glue->context.phy_utmi);
|
|
musb_writel(mbase, wrp->mode, glue->context.mode);
|
|
musb_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
|
|
musb_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
|
|
if (musb->xceiv->otg->state == OTG_STATE_B_IDLE &&
|
|
musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
|
|
dsps_mod_timer(glue, -1);
|
|
|
|
pm_runtime_put(dev);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(dsps_pm_ops, dsps_suspend, dsps_resume);
|
|
|
|
static struct platform_driver dsps_usbss_driver = {
|
|
.probe = dsps_probe,
|
|
.remove = dsps_remove,
|
|
.driver = {
|
|
.name = "musb-dsps",
|
|
.pm = &dsps_pm_ops,
|
|
.of_match_table = musb_dsps_of_match,
|
|
},
|
|
};
|
|
|
|
MODULE_DESCRIPTION("TI DSPS MUSB Glue Layer");
|
|
MODULE_AUTHOR("Ravi B <ravibabu@ti.com>");
|
|
MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
module_platform_driver(dsps_usbss_driver);
|