mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 02:04:19 +08:00
4b5e536b0e
This allows an userspace application to poll() on the alarm files to get notified in case of a temperature threshold event. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
512 lines
13 KiB
C
512 lines
13 KiB
C
/*
|
|
* adt7x10.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* This driver handles the ADT7410 and compatible digital temperature sensors.
|
|
* Hartmut Knaack <knaack.h@gmx.de> 2012-07-22
|
|
* based on lm75.c by Frodo Looijaard <frodol@dds.nl>
|
|
* and adt7410.c from iio-staging by Sonic Zhang <sonic.zhang@analog.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include "adt7x10.h"
|
|
|
|
/*
|
|
* ADT7X10 status
|
|
*/
|
|
#define ADT7X10_STAT_T_LOW (1 << 4)
|
|
#define ADT7X10_STAT_T_HIGH (1 << 5)
|
|
#define ADT7X10_STAT_T_CRIT (1 << 6)
|
|
#define ADT7X10_STAT_NOT_RDY (1 << 7)
|
|
|
|
/*
|
|
* ADT7X10 config
|
|
*/
|
|
#define ADT7X10_FAULT_QUEUE_MASK (1 << 0 | 1 << 1)
|
|
#define ADT7X10_CT_POLARITY (1 << 2)
|
|
#define ADT7X10_INT_POLARITY (1 << 3)
|
|
#define ADT7X10_EVENT_MODE (1 << 4)
|
|
#define ADT7X10_MODE_MASK (1 << 5 | 1 << 6)
|
|
#define ADT7X10_FULL (0 << 5 | 0 << 6)
|
|
#define ADT7X10_PD (1 << 5 | 1 << 6)
|
|
#define ADT7X10_RESOLUTION (1 << 7)
|
|
|
|
/*
|
|
* ADT7X10 masks
|
|
*/
|
|
#define ADT7X10_T13_VALUE_MASK 0xFFF8
|
|
#define ADT7X10_T_HYST_MASK 0xF
|
|
|
|
/* straight from the datasheet */
|
|
#define ADT7X10_TEMP_MIN (-55000)
|
|
#define ADT7X10_TEMP_MAX 150000
|
|
|
|
/* Each client has this additional data */
|
|
struct adt7x10_data {
|
|
const struct adt7x10_ops *ops;
|
|
const char *name;
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock;
|
|
u8 config;
|
|
u8 oldconfig;
|
|
bool valid; /* true if registers valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
s16 temp[4]; /* Register values,
|
|
0 = input
|
|
1 = high
|
|
2 = low
|
|
3 = critical */
|
|
u8 hyst; /* hysteresis offset */
|
|
};
|
|
|
|
static int adt7x10_read_byte(struct device *dev, u8 reg)
|
|
{
|
|
struct adt7x10_data *d = dev_get_drvdata(dev);
|
|
return d->ops->read_byte(dev, reg);
|
|
}
|
|
|
|
static int adt7x10_write_byte(struct device *dev, u8 reg, u8 data)
|
|
{
|
|
struct adt7x10_data *d = dev_get_drvdata(dev);
|
|
return d->ops->write_byte(dev, reg, data);
|
|
}
|
|
|
|
static int adt7x10_read_word(struct device *dev, u8 reg)
|
|
{
|
|
struct adt7x10_data *d = dev_get_drvdata(dev);
|
|
return d->ops->read_word(dev, reg);
|
|
}
|
|
|
|
static int adt7x10_write_word(struct device *dev, u8 reg, u16 data)
|
|
{
|
|
struct adt7x10_data *d = dev_get_drvdata(dev);
|
|
return d->ops->write_word(dev, reg, data);
|
|
}
|
|
|
|
static const u8 ADT7X10_REG_TEMP[4] = {
|
|
ADT7X10_TEMPERATURE, /* input */
|
|
ADT7X10_T_ALARM_HIGH, /* high */
|
|
ADT7X10_T_ALARM_LOW, /* low */
|
|
ADT7X10_T_CRIT, /* critical */
|
|
};
|
|
|
|
static irqreturn_t adt7x10_irq_handler(int irq, void *private)
|
|
{
|
|
struct device *dev = private;
|
|
int status;
|
|
|
|
status = adt7x10_read_byte(dev, ADT7X10_STATUS);
|
|
if (status < 0)
|
|
return IRQ_HANDLED;
|
|
|
|
if (status & ADT7X10_STAT_T_HIGH)
|
|
sysfs_notify(&dev->kobj, NULL, "temp1_max_alarm");
|
|
if (status & ADT7X10_STAT_T_LOW)
|
|
sysfs_notify(&dev->kobj, NULL, "temp1_min_alarm");
|
|
if (status & ADT7X10_STAT_T_CRIT)
|
|
sysfs_notify(&dev->kobj, NULL, "temp1_crit_alarm");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int adt7x10_temp_ready(struct device *dev)
|
|
{
|
|
int i, status;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
status = adt7x10_read_byte(dev, ADT7X10_STATUS);
|
|
if (status < 0)
|
|
return status;
|
|
if (!(status & ADT7X10_STAT_NOT_RDY))
|
|
return 0;
|
|
msleep(60);
|
|
}
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int adt7x10_update_temp(struct device *dev)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
int ret = 0;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|
|
|| !data->valid) {
|
|
int temp;
|
|
|
|
dev_dbg(dev, "Starting update\n");
|
|
|
|
ret = adt7x10_temp_ready(dev); /* check for new value */
|
|
if (ret)
|
|
goto abort;
|
|
|
|
temp = adt7x10_read_word(dev, ADT7X10_REG_TEMP[0]);
|
|
if (temp < 0) {
|
|
ret = temp;
|
|
dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
|
|
ADT7X10_REG_TEMP[0], ret);
|
|
goto abort;
|
|
}
|
|
data->temp[0] = temp;
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int adt7x10_fill_cache(struct device *dev)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 1; i < ARRAY_SIZE(data->temp); i++) {
|
|
ret = adt7x10_read_word(dev, ADT7X10_REG_TEMP[i]);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
|
|
ADT7X10_REG_TEMP[i], ret);
|
|
return ret;
|
|
}
|
|
data->temp[i] = ret;
|
|
}
|
|
|
|
ret = adt7x10_read_byte(dev, ADT7X10_T_HYST);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "Failed to read value: reg %d, error %d\n",
|
|
ADT7X10_T_HYST, ret);
|
|
return ret;
|
|
}
|
|
data->hyst = ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static s16 ADT7X10_TEMP_TO_REG(long temp)
|
|
{
|
|
return DIV_ROUND_CLOSEST(clamp_val(temp, ADT7X10_TEMP_MIN,
|
|
ADT7X10_TEMP_MAX) * 128, 1000);
|
|
}
|
|
|
|
static int ADT7X10_REG_TO_TEMP(struct adt7x10_data *data, s16 reg)
|
|
{
|
|
/* in 13 bit mode, bits 0-2 are status flags - mask them out */
|
|
if (!(data->config & ADT7X10_RESOLUTION))
|
|
reg &= ADT7X10_T13_VALUE_MASK;
|
|
/*
|
|
* temperature is stored in twos complement format, in steps of
|
|
* 1/128°C
|
|
*/
|
|
return DIV_ROUND_CLOSEST(reg * 1000, 128);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
/* sysfs attributes for hwmon */
|
|
|
|
static ssize_t adt7x10_show_temp(struct device *dev,
|
|
struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
|
|
|
|
if (attr->index == 0) {
|
|
int ret;
|
|
|
|
ret = adt7x10_update_temp(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", ADT7X10_REG_TO_TEMP(data,
|
|
data->temp[attr->index]));
|
|
}
|
|
|
|
static ssize_t adt7x10_set_temp(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
int nr = attr->index;
|
|
long temp;
|
|
int ret;
|
|
|
|
ret = kstrtol(buf, 10, &temp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp[nr] = ADT7X10_TEMP_TO_REG(temp);
|
|
ret = adt7x10_write_word(dev, ADT7X10_REG_TEMP[nr], data->temp[nr]);
|
|
if (ret)
|
|
count = ret;
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t adt7x10_show_t_hyst(struct device *dev,
|
|
struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
int nr = attr->index;
|
|
int hyst;
|
|
|
|
hyst = (data->hyst & ADT7X10_T_HYST_MASK) * 1000;
|
|
|
|
/*
|
|
* hysteresis is stored as a 4 bit offset in the device, convert it
|
|
* to an absolute value
|
|
*/
|
|
if (nr == 2) /* min has positive offset, others have negative */
|
|
hyst = -hyst;
|
|
return sprintf(buf, "%d\n",
|
|
ADT7X10_REG_TO_TEMP(data, data->temp[nr]) - hyst);
|
|
}
|
|
|
|
static ssize_t adt7x10_set_t_hyst(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
int limit, ret;
|
|
long hyst;
|
|
|
|
ret = kstrtol(buf, 10, &hyst);
|
|
if (ret)
|
|
return ret;
|
|
/* convert absolute hysteresis value to a 4 bit delta value */
|
|
limit = ADT7X10_REG_TO_TEMP(data, data->temp[1]);
|
|
hyst = clamp_val(hyst, ADT7X10_TEMP_MIN, ADT7X10_TEMP_MAX);
|
|
data->hyst = clamp_val(DIV_ROUND_CLOSEST(limit - hyst, 1000),
|
|
0, ADT7X10_T_HYST_MASK);
|
|
ret = adt7x10_write_byte(dev, ADT7X10_T_HYST, data->hyst);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t adt7x10_show_alarm(struct device *dev,
|
|
struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int ret;
|
|
|
|
ret = adt7x10_read_byte(dev, ADT7X10_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return sprintf(buf, "%d\n", !!(ret & attr->index));
|
|
}
|
|
|
|
static ssize_t adt7x10_show_name(struct device *dev,
|
|
struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adt7x10_show_temp, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
|
|
adt7x10_show_temp, adt7x10_set_temp, 1);
|
|
static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
|
|
adt7x10_show_temp, adt7x10_set_temp, 2);
|
|
static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO,
|
|
adt7x10_show_temp, adt7x10_set_temp, 3);
|
|
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO,
|
|
adt7x10_show_t_hyst, adt7x10_set_t_hyst, 1);
|
|
static SENSOR_DEVICE_ATTR(temp1_min_hyst, S_IRUGO,
|
|
adt7x10_show_t_hyst, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO,
|
|
adt7x10_show_t_hyst, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, adt7x10_show_alarm,
|
|
NULL, ADT7X10_STAT_T_LOW);
|
|
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adt7x10_show_alarm,
|
|
NULL, ADT7X10_STAT_T_HIGH);
|
|
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, adt7x10_show_alarm,
|
|
NULL, ADT7X10_STAT_T_CRIT);
|
|
static DEVICE_ATTR(name, S_IRUGO, adt7x10_show_name, NULL);
|
|
|
|
static struct attribute *adt7x10_attributes[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_crit.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group adt7x10_group = {
|
|
.attrs = adt7x10_attributes,
|
|
};
|
|
|
|
int adt7x10_probe(struct device *dev, const char *name, int irq,
|
|
const struct adt7x10_ops *ops)
|
|
{
|
|
struct adt7x10_data *data;
|
|
int ret;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->ops = ops;
|
|
data->name = name;
|
|
|
|
dev_set_drvdata(dev, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* configure as specified */
|
|
ret = adt7x10_read_byte(dev, ADT7X10_CONFIG);
|
|
if (ret < 0) {
|
|
dev_dbg(dev, "Can't read config? %d\n", ret);
|
|
return ret;
|
|
}
|
|
data->oldconfig = ret;
|
|
|
|
/*
|
|
* Set to 16 bit resolution, continous conversion and comparator mode.
|
|
*/
|
|
data->config = data->oldconfig;
|
|
data->config &= ~(ADT7X10_MODE_MASK | ADT7X10_CT_POLARITY |
|
|
ADT7X10_INT_POLARITY);
|
|
data->config |= ADT7X10_FULL | ADT7X10_RESOLUTION | ADT7X10_EVENT_MODE;
|
|
|
|
if (data->config != data->oldconfig) {
|
|
ret = adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
dev_dbg(dev, "Config %02x\n", data->config);
|
|
|
|
ret = adt7x10_fill_cache(dev);
|
|
if (ret)
|
|
goto exit_restore;
|
|
|
|
/* Register sysfs hooks */
|
|
ret = sysfs_create_group(&dev->kobj, &adt7x10_group);
|
|
if (ret)
|
|
goto exit_restore;
|
|
|
|
/*
|
|
* The I2C device will already have it's own 'name' attribute, but for
|
|
* the SPI device we need to register it. name will only be non NULL if
|
|
* the device doesn't register the 'name' attribute on its own.
|
|
*/
|
|
if (name) {
|
|
ret = device_create_file(dev, &dev_attr_name);
|
|
if (ret)
|
|
goto exit_remove;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
ret = PTR_ERR(data->hwmon_dev);
|
|
goto exit_remove_name;
|
|
}
|
|
|
|
if (irq > 0) {
|
|
ret = request_threaded_irq(irq, NULL, adt7x10_irq_handler,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
|
dev_name(dev), dev);
|
|
if (ret)
|
|
goto exit_hwmon_device_unregister;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_hwmon_device_unregister:
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
exit_remove_name:
|
|
if (name)
|
|
device_remove_file(dev, &dev_attr_name);
|
|
exit_remove:
|
|
sysfs_remove_group(&dev->kobj, &adt7x10_group);
|
|
exit_restore:
|
|
adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(adt7x10_probe);
|
|
|
|
int adt7x10_remove(struct device *dev, int irq)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
|
|
if (irq > 0)
|
|
free_irq(irq, dev);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
if (data->name)
|
|
device_remove_file(dev, &dev_attr_name);
|
|
sysfs_remove_group(&dev->kobj, &adt7x10_group);
|
|
if (data->oldconfig != data->config)
|
|
adt7x10_write_byte(dev, ADT7X10_CONFIG, data->oldconfig);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(adt7x10_remove);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int adt7x10_suspend(struct device *dev)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
|
|
return adt7x10_write_byte(dev, ADT7X10_CONFIG,
|
|
data->config | ADT7X10_PD);
|
|
}
|
|
|
|
static int adt7x10_resume(struct device *dev)
|
|
{
|
|
struct adt7x10_data *data = dev_get_drvdata(dev);
|
|
|
|
return adt7x10_write_byte(dev, ADT7X10_CONFIG, data->config);
|
|
}
|
|
|
|
SIMPLE_DEV_PM_OPS(adt7x10_dev_pm_ops, adt7x10_suspend, adt7x10_resume);
|
|
EXPORT_SYMBOL_GPL(adt7x10_dev_pm_ops);
|
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
MODULE_AUTHOR("Hartmut Knaack");
|
|
MODULE_DESCRIPTION("ADT7410/ADT7420, ADT7310/ADT7320 common code");
|
|
MODULE_LICENSE("GPL");
|