mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 06:24:53 +08:00
3c22939eb3
The devm_clk_get_enabled() helper: - calls devm_clk_get() - calls clk_prepare_enable() and registers what is needed in order to call clk_disable_unprepare() when needed, as a managed resource. This simplifies the code and avoids the need of a dedicated function used with devm_add_action_or_reset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/5e4255782fbb43d1b4b5cd03bd12d7a184497134.1672498920.git.christophe.jaillet@wanadoo.fr Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
373 lines
10 KiB
C
373 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
||
/*
|
||
* Realtek Otto MIPS platform watchdog
|
||
*
|
||
* Watchdog timer that will reset the system after timeout, using the selected
|
||
* reset mode.
|
||
*
|
||
* Counter scaling and timeouts:
|
||
* - Base prescale of (2 << 25), providing tick duration T_0: 168ms @ 200MHz
|
||
* - PRESCALE: logarithmic prescaler adding a factor of {1, 2, 4, 8}
|
||
* - Phase 1: Times out after (PHASE1 + 1) × PRESCALE × T_0
|
||
* Generates an interrupt, WDT cannot be stopped after phase 1
|
||
* - Phase 2: starts after phase 1, times out after (PHASE2 + 1) × PRESCALE × T_0
|
||
* Resets the system according to RST_MODE
|
||
*/
|
||
|
||
#include <linux/bits.h>
|
||
#include <linux/bitfield.h>
|
||
#include <linux/clk.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/io.h>
|
||
#include <linux/math.h>
|
||
#include <linux/minmax.h>
|
||
#include <linux/module.h>
|
||
#include <linux/mod_devicetable.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/property.h>
|
||
#include <linux/reboot.h>
|
||
#include <linux/watchdog.h>
|
||
|
||
#define OTTO_WDT_REG_CNTR 0x0
|
||
#define OTTO_WDT_CNTR_PING BIT(31)
|
||
|
||
#define OTTO_WDT_REG_INTR 0x4
|
||
#define OTTO_WDT_INTR_PHASE_1 BIT(31)
|
||
#define OTTO_WDT_INTR_PHASE_2 BIT(30)
|
||
|
||
#define OTTO_WDT_REG_CTRL 0x8
|
||
#define OTTO_WDT_CTRL_ENABLE BIT(31)
|
||
#define OTTO_WDT_CTRL_PRESCALE GENMASK(30, 29)
|
||
#define OTTO_WDT_CTRL_PHASE1 GENMASK(26, 22)
|
||
#define OTTO_WDT_CTRL_PHASE2 GENMASK(19, 15)
|
||
#define OTTO_WDT_CTRL_RST_MODE GENMASK(1, 0)
|
||
#define OTTO_WDT_MODE_SOC 0
|
||
#define OTTO_WDT_MODE_CPU 1
|
||
#define OTTO_WDT_MODE_SOFTWARE 2
|
||
#define OTTO_WDT_CTRL_DEFAULT OTTO_WDT_MODE_CPU
|
||
|
||
#define OTTO_WDT_PRESCALE_MAX 3
|
||
|
||
/*
|
||
* One higher than the max values contained in PHASE{1,2}, since a value of 0
|
||
* corresponds to one tick.
|
||
*/
|
||
#define OTTO_WDT_PHASE_TICKS_MAX 32
|
||
|
||
/*
|
||
* The maximum reset delay is actually 2×32 ticks, but that would require large
|
||
* pretimeout values for timeouts longer than 32 ticks. Limit the maximum timeout
|
||
* to 32 + 1 to ensure small pretimeout values can be configured as expected.
|
||
*/
|
||
#define OTTO_WDT_TIMEOUT_TICKS_MAX (OTTO_WDT_PHASE_TICKS_MAX + 1)
|
||
|
||
struct otto_wdt_ctrl {
|
||
struct watchdog_device wdev;
|
||
struct device *dev;
|
||
void __iomem *base;
|
||
unsigned int clk_rate_khz;
|
||
int irq_phase1;
|
||
};
|
||
|
||
static int otto_wdt_start(struct watchdog_device *wdev)
|
||
{
|
||
struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
|
||
u32 v;
|
||
|
||
v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
|
||
v |= OTTO_WDT_CTRL_ENABLE;
|
||
iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int otto_wdt_stop(struct watchdog_device *wdev)
|
||
{
|
||
struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
|
||
u32 v;
|
||
|
||
v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
|
||
v &= ~OTTO_WDT_CTRL_ENABLE;
|
||
iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int otto_wdt_ping(struct watchdog_device *wdev)
|
||
{
|
||
struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
|
||
|
||
iowrite32(OTTO_WDT_CNTR_PING, ctrl->base + OTTO_WDT_REG_CNTR);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int otto_wdt_tick_ms(struct otto_wdt_ctrl *ctrl, int prescale)
|
||
{
|
||
return DIV_ROUND_CLOSEST(1 << (25 + prescale), ctrl->clk_rate_khz);
|
||
}
|
||
|
||
/*
|
||
* The timer asserts the PHASE1/PHASE2 IRQs when the number of ticks exceeds
|
||
* the value stored in those fields. This means each phase will run for at least
|
||
* one tick, so small values need to be clamped to correctly reflect the timeout.
|
||
*/
|
||
static inline unsigned int div_round_ticks(unsigned int val, unsigned int tick_duration,
|
||
unsigned int min_ticks)
|
||
{
|
||
return max(min_ticks, DIV_ROUND_UP(val, tick_duration));
|
||
}
|
||
|
||
static int otto_wdt_determine_timeouts(struct watchdog_device *wdev, unsigned int timeout,
|
||
unsigned int pretimeout)
|
||
{
|
||
struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
|
||
unsigned int pretimeout_ms = pretimeout * 1000;
|
||
unsigned int timeout_ms = timeout * 1000;
|
||
unsigned int prescale_next = 0;
|
||
unsigned int phase1_ticks;
|
||
unsigned int phase2_ticks;
|
||
unsigned int total_ticks;
|
||
unsigned int prescale;
|
||
unsigned int tick_ms;
|
||
u32 v;
|
||
|
||
do {
|
||
prescale = prescale_next;
|
||
if (prescale > OTTO_WDT_PRESCALE_MAX)
|
||
return -EINVAL;
|
||
|
||
tick_ms = otto_wdt_tick_ms(ctrl, prescale);
|
||
total_ticks = div_round_ticks(timeout_ms, tick_ms, 2);
|
||
phase1_ticks = div_round_ticks(timeout_ms - pretimeout_ms, tick_ms, 1);
|
||
phase2_ticks = total_ticks - phase1_ticks;
|
||
|
||
prescale_next++;
|
||
} while (phase1_ticks > OTTO_WDT_PHASE_TICKS_MAX
|
||
|| phase2_ticks > OTTO_WDT_PHASE_TICKS_MAX);
|
||
|
||
v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
v &= ~(OTTO_WDT_CTRL_PRESCALE | OTTO_WDT_CTRL_PHASE1 | OTTO_WDT_CTRL_PHASE2);
|
||
v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE1, phase1_ticks - 1);
|
||
v |= FIELD_PREP(OTTO_WDT_CTRL_PHASE2, phase2_ticks - 1);
|
||
v |= FIELD_PREP(OTTO_WDT_CTRL_PRESCALE, prescale);
|
||
|
||
iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
timeout_ms = total_ticks * tick_ms;
|
||
ctrl->wdev.timeout = timeout_ms / 1000;
|
||
|
||
pretimeout_ms = phase2_ticks * tick_ms;
|
||
ctrl->wdev.pretimeout = pretimeout_ms / 1000;
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int otto_wdt_set_timeout(struct watchdog_device *wdev, unsigned int val)
|
||
{
|
||
return otto_wdt_determine_timeouts(wdev, val, min(wdev->pretimeout, val - 1));
|
||
}
|
||
|
||
static int otto_wdt_set_pretimeout(struct watchdog_device *wdev, unsigned int val)
|
||
{
|
||
return otto_wdt_determine_timeouts(wdev, wdev->timeout, val);
|
||
}
|
||
|
||
static int otto_wdt_restart(struct watchdog_device *wdev, unsigned long reboot_mode,
|
||
void *data)
|
||
{
|
||
struct otto_wdt_ctrl *ctrl = watchdog_get_drvdata(wdev);
|
||
u32 reset_mode;
|
||
u32 v;
|
||
|
||
disable_irq(ctrl->irq_phase1);
|
||
|
||
switch (reboot_mode) {
|
||
case REBOOT_SOFT:
|
||
reset_mode = OTTO_WDT_MODE_SOFTWARE;
|
||
break;
|
||
case REBOOT_WARM:
|
||
reset_mode = OTTO_WDT_MODE_CPU;
|
||
break;
|
||
default:
|
||
reset_mode = OTTO_WDT_MODE_SOC;
|
||
break;
|
||
}
|
||
|
||
/* Configure for shortest timeout and wait for reset to occur */
|
||
v = FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, reset_mode) | OTTO_WDT_CTRL_ENABLE;
|
||
iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
mdelay(3 * otto_wdt_tick_ms(ctrl, 0));
|
||
|
||
return 0;
|
||
}
|
||
|
||
static irqreturn_t otto_wdt_phase1_isr(int irq, void *dev_id)
|
||
{
|
||
struct otto_wdt_ctrl *ctrl = dev_id;
|
||
|
||
iowrite32(OTTO_WDT_INTR_PHASE_1, ctrl->base + OTTO_WDT_REG_INTR);
|
||
dev_crit(ctrl->dev, "phase 1 timeout\n");
|
||
watchdog_notify_pretimeout(&ctrl->wdev);
|
||
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
static const struct watchdog_ops otto_wdt_ops = {
|
||
.owner = THIS_MODULE,
|
||
.start = otto_wdt_start,
|
||
.stop = otto_wdt_stop,
|
||
.ping = otto_wdt_ping,
|
||
.set_timeout = otto_wdt_set_timeout,
|
||
.set_pretimeout = otto_wdt_set_pretimeout,
|
||
.restart = otto_wdt_restart,
|
||
};
|
||
|
||
static const struct watchdog_info otto_wdt_info = {
|
||
.identity = "Realtek Otto watchdog timer",
|
||
.options = WDIOF_KEEPALIVEPING |
|
||
WDIOF_MAGICCLOSE |
|
||
WDIOF_SETTIMEOUT |
|
||
WDIOF_PRETIMEOUT,
|
||
};
|
||
|
||
static int otto_wdt_probe_clk(struct otto_wdt_ctrl *ctrl)
|
||
{
|
||
struct clk *clk;
|
||
|
||
clk = devm_clk_get_enabled(ctrl->dev, NULL);
|
||
if (IS_ERR(clk))
|
||
return dev_err_probe(ctrl->dev, PTR_ERR(clk), "Failed to get clock\n");
|
||
|
||
ctrl->clk_rate_khz = clk_get_rate(clk) / 1000;
|
||
if (ctrl->clk_rate_khz == 0)
|
||
return dev_err_probe(ctrl->dev, -ENXIO, "Failed to get clock rate\n");
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int otto_wdt_probe_reset_mode(struct otto_wdt_ctrl *ctrl)
|
||
{
|
||
static const char *mode_property = "realtek,reset-mode";
|
||
const struct fwnode_handle *node = ctrl->dev->fwnode;
|
||
int mode_count;
|
||
u32 mode;
|
||
u32 v;
|
||
|
||
if (!node)
|
||
return -ENXIO;
|
||
|
||
mode_count = fwnode_property_string_array_count(node, mode_property);
|
||
if (mode_count < 0)
|
||
return mode_count;
|
||
else if (mode_count == 0)
|
||
return 0;
|
||
else if (mode_count != 1)
|
||
return -EINVAL;
|
||
|
||
if (fwnode_property_match_string(node, mode_property, "soc") == 0)
|
||
mode = OTTO_WDT_MODE_SOC;
|
||
else if (fwnode_property_match_string(node, mode_property, "cpu") == 0)
|
||
mode = OTTO_WDT_MODE_CPU;
|
||
else if (fwnode_property_match_string(node, mode_property, "software") == 0)
|
||
mode = OTTO_WDT_MODE_SOFTWARE;
|
||
else
|
||
return -EINVAL;
|
||
|
||
v = ioread32(ctrl->base + OTTO_WDT_REG_CTRL);
|
||
v &= ~OTTO_WDT_CTRL_RST_MODE;
|
||
v |= FIELD_PREP(OTTO_WDT_CTRL_RST_MODE, mode);
|
||
iowrite32(v, ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int otto_wdt_probe(struct platform_device *pdev)
|
||
{
|
||
struct device *dev = &pdev->dev;
|
||
struct otto_wdt_ctrl *ctrl;
|
||
unsigned int max_tick_ms;
|
||
int ret;
|
||
|
||
ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
|
||
if (!ctrl)
|
||
return -ENOMEM;
|
||
|
||
ctrl->dev = dev;
|
||
ctrl->base = devm_platform_ioremap_resource(pdev, 0);
|
||
if (IS_ERR(ctrl->base))
|
||
return PTR_ERR(ctrl->base);
|
||
|
||
/* Clear any old interrupts and reset initial state */
|
||
iowrite32(OTTO_WDT_INTR_PHASE_1 | OTTO_WDT_INTR_PHASE_2,
|
||
ctrl->base + OTTO_WDT_REG_INTR);
|
||
iowrite32(OTTO_WDT_CTRL_DEFAULT, ctrl->base + OTTO_WDT_REG_CTRL);
|
||
|
||
ret = otto_wdt_probe_clk(ctrl);
|
||
if (ret)
|
||
return ret;
|
||
|
||
ctrl->irq_phase1 = platform_get_irq_byname(pdev, "phase1");
|
||
if (ctrl->irq_phase1 < 0)
|
||
return ctrl->irq_phase1;
|
||
|
||
ret = devm_request_irq(dev, ctrl->irq_phase1, otto_wdt_phase1_isr, 0,
|
||
"realtek-otto-wdt", ctrl);
|
||
if (ret)
|
||
return dev_err_probe(dev, ret, "Failed to get IRQ for phase1\n");
|
||
|
||
ret = otto_wdt_probe_reset_mode(ctrl);
|
||
if (ret)
|
||
return dev_err_probe(dev, ret, "Invalid reset mode specified\n");
|
||
|
||
ctrl->wdev.parent = dev;
|
||
ctrl->wdev.info = &otto_wdt_info;
|
||
ctrl->wdev.ops = &otto_wdt_ops;
|
||
|
||
/*
|
||
* Since pretimeout cannot be disabled, min. timeout is twice the
|
||
* subsystem resolution. Max. timeout is ca. 43s at a bus clock of 200MHz.
|
||
*/
|
||
ctrl->wdev.min_timeout = 2;
|
||
max_tick_ms = otto_wdt_tick_ms(ctrl, OTTO_WDT_PRESCALE_MAX);
|
||
ctrl->wdev.max_hw_heartbeat_ms = max_tick_ms * OTTO_WDT_TIMEOUT_TICKS_MAX;
|
||
ctrl->wdev.timeout = min(30U, ctrl->wdev.max_hw_heartbeat_ms / 1000);
|
||
|
||
watchdog_set_drvdata(&ctrl->wdev, ctrl);
|
||
watchdog_init_timeout(&ctrl->wdev, 0, dev);
|
||
watchdog_stop_on_reboot(&ctrl->wdev);
|
||
watchdog_set_restart_priority(&ctrl->wdev, 128);
|
||
|
||
ret = otto_wdt_determine_timeouts(&ctrl->wdev, ctrl->wdev.timeout, 1);
|
||
if (ret)
|
||
return dev_err_probe(dev, ret, "Failed to set timeout\n");
|
||
|
||
return devm_watchdog_register_device(dev, &ctrl->wdev);
|
||
}
|
||
|
||
static const struct of_device_id otto_wdt_ids[] = {
|
||
{ .compatible = "realtek,rtl8380-wdt" },
|
||
{ .compatible = "realtek,rtl8390-wdt" },
|
||
{ .compatible = "realtek,rtl9300-wdt" },
|
||
{ .compatible = "realtek,rtl9310-wdt" },
|
||
{ }
|
||
};
|
||
MODULE_DEVICE_TABLE(of, otto_wdt_ids);
|
||
|
||
static struct platform_driver otto_wdt_driver = {
|
||
.probe = otto_wdt_probe,
|
||
.driver = {
|
||
.name = "realtek-otto-watchdog",
|
||
.of_match_table = otto_wdt_ids,
|
||
},
|
||
};
|
||
module_platform_driver(otto_wdt_driver);
|
||
|
||
MODULE_LICENSE("GPL v2");
|
||
MODULE_AUTHOR("Sander Vanheule <sander@svanheule.net>");
|
||
MODULE_DESCRIPTION("Realtek Otto watchdog timer driver");
|