mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
32fde84362
When the gadget driver hasn't been (yet) configured, and the cable is
connected to a HOST, the SFTDISCON gets cleared unconditionally, so the
HOST tries to enumerate it.
At the host side, this can result in a stuck USB port or worse. When
getting lucky, some dmesg can be observed at the host side:
new high-speed USB device number ...
device descriptor read/64, error -110
Fix it in drd, by checking the enabled flag before calling
dwc2_hsotg_core_connect(). It will be called later, once configured,
by the normal flow:
- udc_bind_to_driver
- usb_gadget_connect
- dwc2_hsotg_pullup
- dwc2_hsotg_core_connect
Fixes: 17f934024e
("usb: dwc2: override PHY input signals with usb role switch support")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
250 lines
6.8 KiB
C
250 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* drd.c - DesignWare USB2 DRD Controller Dual-role support
|
|
*
|
|
* Copyright (C) 2020 STMicroelectronics
|
|
*
|
|
* Author(s): Amelie Delaunay <amelie.delaunay@st.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/usb/role.h>
|
|
#include "core.h"
|
|
|
|
#define dwc2_ovr_gotgctl(gotgctl) \
|
|
((gotgctl) |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN | GOTGCTL_VBVALOEN | \
|
|
GOTGCTL_DBNCE_FLTR_BYPASS)
|
|
|
|
static void dwc2_ovr_init(struct dwc2_hsotg *hsotg)
|
|
{
|
|
unsigned long flags;
|
|
u32 gotgctl;
|
|
|
|
spin_lock_irqsave(&hsotg->lock, flags);
|
|
|
|
gotgctl = dwc2_readl(hsotg, GOTGCTL);
|
|
dwc2_ovr_gotgctl(gotgctl);
|
|
gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
|
|
if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
|
|
gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
|
|
else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
|
|
gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
|
|
dwc2_writel(hsotg, gotgctl, GOTGCTL);
|
|
|
|
spin_unlock_irqrestore(&hsotg->lock, flags);
|
|
|
|
dwc2_force_mode(hsotg, (hsotg->dr_mode == USB_DR_MODE_HOST));
|
|
}
|
|
|
|
static int dwc2_ovr_avalid(struct dwc2_hsotg *hsotg, bool valid)
|
|
{
|
|
u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
|
|
|
|
/* Check if A-Session is already in the right state */
|
|
if ((valid && (gotgctl & GOTGCTL_ASESVLD)) ||
|
|
(!valid && !(gotgctl & GOTGCTL_ASESVLD)))
|
|
return -EALREADY;
|
|
|
|
/* Always enable overrides to handle the resume case */
|
|
dwc2_ovr_gotgctl(gotgctl);
|
|
|
|
gotgctl &= ~GOTGCTL_BVALOVAL;
|
|
if (valid)
|
|
gotgctl |= GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL;
|
|
else
|
|
gotgctl &= ~(GOTGCTL_AVALOVAL | GOTGCTL_VBVALOVAL);
|
|
dwc2_writel(hsotg, gotgctl, GOTGCTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc2_ovr_bvalid(struct dwc2_hsotg *hsotg, bool valid)
|
|
{
|
|
u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
|
|
|
|
/* Check if B-Session is already in the right state */
|
|
if ((valid && (gotgctl & GOTGCTL_BSESVLD)) ||
|
|
(!valid && !(gotgctl & GOTGCTL_BSESVLD)))
|
|
return -EALREADY;
|
|
|
|
/* Always enable overrides to handle the resume case */
|
|
dwc2_ovr_gotgctl(gotgctl);
|
|
|
|
gotgctl &= ~GOTGCTL_AVALOVAL;
|
|
if (valid)
|
|
gotgctl |= GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL;
|
|
else
|
|
gotgctl &= ~(GOTGCTL_BVALOVAL | GOTGCTL_VBVALOVAL);
|
|
dwc2_writel(hsotg, gotgctl, GOTGCTL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwc2_drd_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
|
|
{
|
|
struct dwc2_hsotg *hsotg = usb_role_switch_get_drvdata(sw);
|
|
unsigned long flags;
|
|
int already = 0;
|
|
|
|
/* Skip session not in line with dr_mode */
|
|
if ((role == USB_ROLE_DEVICE && hsotg->dr_mode == USB_DR_MODE_HOST) ||
|
|
(role == USB_ROLE_HOST && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
|
|
return -EINVAL;
|
|
|
|
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
|
|
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
|
|
/* Skip session if core is in test mode */
|
|
if (role == USB_ROLE_NONE && hsotg->test_mode) {
|
|
dev_dbg(hsotg->dev, "Core is in test mode\n");
|
|
return -EBUSY;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* In case of USB_DR_MODE_PERIPHERAL, clock is disabled at the end of
|
|
* the probe and enabled on udc_start.
|
|
* If role-switch set is called before the udc_start, we need to enable
|
|
* the clock to read/write GOTGCTL and GUSBCFG registers to override
|
|
* mode and sessions. It is the case if cable is plugged at boot.
|
|
*/
|
|
if (!hsotg->ll_hw_enabled && hsotg->clk) {
|
|
int ret = clk_prepare_enable(hsotg->clk);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
spin_lock_irqsave(&hsotg->lock, flags);
|
|
|
|
if (role == USB_ROLE_NONE) {
|
|
/* default operation mode when usb role is USB_ROLE_NONE */
|
|
if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
|
|
role = USB_ROLE_HOST;
|
|
else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
|
|
role = USB_ROLE_DEVICE;
|
|
}
|
|
|
|
if (role == USB_ROLE_HOST) {
|
|
already = dwc2_ovr_avalid(hsotg, true);
|
|
} else if (role == USB_ROLE_DEVICE) {
|
|
already = dwc2_ovr_bvalid(hsotg, true);
|
|
if (dwc2_is_device_enabled(hsotg)) {
|
|
/* This clear DCTL.SFTDISCON bit */
|
|
dwc2_hsotg_core_connect(hsotg);
|
|
}
|
|
} else {
|
|
if (dwc2_is_device_mode(hsotg)) {
|
|
if (!dwc2_ovr_bvalid(hsotg, false))
|
|
/* This set DCTL.SFTDISCON bit */
|
|
dwc2_hsotg_core_disconnect(hsotg);
|
|
} else {
|
|
dwc2_ovr_avalid(hsotg, false);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&hsotg->lock, flags);
|
|
|
|
if (!already && hsotg->dr_mode == USB_DR_MODE_OTG)
|
|
/* This will raise a Connector ID Status Change Interrupt */
|
|
dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
|
|
|
|
if (!hsotg->ll_hw_enabled && hsotg->clk)
|
|
clk_disable_unprepare(hsotg->clk);
|
|
|
|
dev_dbg(hsotg->dev, "%s-session valid\n",
|
|
role == USB_ROLE_NONE ? "No" :
|
|
role == USB_ROLE_HOST ? "A" : "B");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dwc2_drd_init(struct dwc2_hsotg *hsotg)
|
|
{
|
|
struct usb_role_switch_desc role_sw_desc = {0};
|
|
struct usb_role_switch *role_sw;
|
|
int ret;
|
|
|
|
if (!device_property_read_bool(hsotg->dev, "usb-role-switch"))
|
|
return 0;
|
|
|
|
hsotg->role_sw_default_mode = usb_get_role_switch_default_mode(hsotg->dev);
|
|
role_sw_desc.driver_data = hsotg;
|
|
role_sw_desc.fwnode = dev_fwnode(hsotg->dev);
|
|
role_sw_desc.set = dwc2_drd_role_sw_set;
|
|
role_sw_desc.allow_userspace_control = true;
|
|
|
|
role_sw = usb_role_switch_register(hsotg->dev, &role_sw_desc);
|
|
if (IS_ERR(role_sw)) {
|
|
ret = PTR_ERR(role_sw);
|
|
dev_err(hsotg->dev,
|
|
"failed to register role switch: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
hsotg->role_sw = role_sw;
|
|
|
|
/* Enable override and initialize values */
|
|
dwc2_ovr_init(hsotg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dwc2_drd_suspend(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 gintsts, gintmsk;
|
|
|
|
if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
|
|
gintmsk = dwc2_readl(hsotg, GINTMSK);
|
|
gintmsk &= ~GINTSTS_CONIDSTSCHNG;
|
|
dwc2_writel(hsotg, gintmsk, GINTMSK);
|
|
gintsts = dwc2_readl(hsotg, GINTSTS);
|
|
dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
|
|
}
|
|
}
|
|
|
|
void dwc2_drd_resume(struct dwc2_hsotg *hsotg)
|
|
{
|
|
u32 gintsts, gintmsk;
|
|
enum usb_role role;
|
|
|
|
if (hsotg->role_sw) {
|
|
/* get last known role (as the get ops isn't implemented by this driver) */
|
|
role = usb_role_switch_get_role(hsotg->role_sw);
|
|
|
|
if (role == USB_ROLE_NONE) {
|
|
if (hsotg->role_sw_default_mode == USB_DR_MODE_HOST)
|
|
role = USB_ROLE_HOST;
|
|
else if (hsotg->role_sw_default_mode == USB_DR_MODE_PERIPHERAL)
|
|
role = USB_ROLE_DEVICE;
|
|
}
|
|
|
|
/* restore last role that may have been lost */
|
|
if (role == USB_ROLE_HOST)
|
|
dwc2_ovr_avalid(hsotg, true);
|
|
else if (role == USB_ROLE_DEVICE)
|
|
dwc2_ovr_bvalid(hsotg, true);
|
|
|
|
dwc2_force_mode(hsotg, role == USB_ROLE_HOST);
|
|
|
|
dev_dbg(hsotg->dev, "resuming %s-session valid\n",
|
|
role == USB_ROLE_NONE ? "No" :
|
|
role == USB_ROLE_HOST ? "A" : "B");
|
|
}
|
|
|
|
if (hsotg->role_sw && !hsotg->params.external_id_pin_ctl) {
|
|
gintsts = dwc2_readl(hsotg, GINTSTS);
|
|
dwc2_writel(hsotg, gintsts | GINTSTS_CONIDSTSCHNG, GINTSTS);
|
|
gintmsk = dwc2_readl(hsotg, GINTMSK);
|
|
gintmsk |= GINTSTS_CONIDSTSCHNG;
|
|
dwc2_writel(hsotg, gintmsk, GINTMSK);
|
|
}
|
|
}
|
|
|
|
void dwc2_drd_exit(struct dwc2_hsotg *hsotg)
|
|
{
|
|
if (hsotg->role_sw)
|
|
usb_role_switch_unregister(hsotg->role_sw);
|
|
}
|