mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 10:04:12 +08:00
71810db27c
The modversion symbol CRCs are emitted as ELF symbols, which allows us
to easily populate the kcrctab sections by relying on the linker to
associate each kcrctab slot with the correct value.
This has a couple of downsides:
- Given that the CRCs are treated as memory addresses, we waste 4 bytes
for each CRC on 64 bit architectures,
- On architectures that support runtime relocation, a R_<arch>_RELATIVE
relocation entry is emitted for each CRC value, which identifies it
as a quantity that requires fixing up based on the actual runtime
load offset of the kernel. This results in corrupted CRCs unless we
explicitly undo the fixup (and this is currently being handled in the
core module code)
- Such runtime relocation entries take up 24 bytes of __init space
each, resulting in a x8 overhead in [uncompressed] kernel size for
CRCs.
Switching to explicit 32 bit values on 64 bit architectures fixes most
of these issues, given that 32 bit values are not treated as quantities
that require fixing up based on the actual runtime load offset. Note
that on some ELF64 architectures [such as PPC64], these 32-bit values
are still emitted as [absolute] runtime relocatable quantities, even if
the value resolves to a build time constant. Since relative relocations
are always resolved at build time, this patch enables MODULE_REL_CRCS on
powerpc when CONFIG_RELOCATABLE=y, which turns the absolute CRC
references into relative references into .rodata where the actual CRC
value is stored.
So redefine all CRC fields and variables as u32, and redefine the
__CRC_SYMBOL() macro for 64 bit builds to emit the CRC reference using
inline assembler (which is necessary since 64-bit C code cannot use
32-bit types to hold memory addresses, even if they are ultimately
resolved using values that do not exceed 0xffffffff). To avoid
potential problems with legacy 32-bit architectures using legacy
toolchains, the equivalent C definition of the kcrctab entry is retained
for 32-bit architectures.
Note that this mostly reverts commit d4703aefdb
("module: handle ppc64
relocating kcrctabs when CONFIG_RELOCATABLE=y")
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
793 lines
22 KiB
C
793 lines
22 KiB
C
/* Kernel module help for PPC64.
|
|
Copyright (C) 2001, 2003 Rusty Russell IBM Corporation.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/elf.h>
|
|
#include <linux/moduleloader.h>
|
|
#include <linux/err.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/ftrace.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/uaccess.h>
|
|
#include <asm/module.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/code-patching.h>
|
|
#include <linux/sort.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/sections.h>
|
|
|
|
/* FIXME: We don't do .init separately. To do this, we'd need to have
|
|
a separate r2 value in the init and core section, and stub between
|
|
them, too.
|
|
|
|
Using a magic allocator which places modules within 32MB solves
|
|
this, and makes other things simpler. Anton?
|
|
--RR. */
|
|
|
|
#ifdef PPC64_ELF_ABI_v2
|
|
|
|
/* An address is simply the address of the function. */
|
|
typedef unsigned long func_desc_t;
|
|
|
|
static func_desc_t func_desc(unsigned long addr)
|
|
{
|
|
return addr;
|
|
}
|
|
static unsigned long func_addr(unsigned long addr)
|
|
{
|
|
return addr;
|
|
}
|
|
static unsigned long stub_func_addr(func_desc_t func)
|
|
{
|
|
return func;
|
|
}
|
|
|
|
/* PowerPC64 specific values for the Elf64_Sym st_other field. */
|
|
#define STO_PPC64_LOCAL_BIT 5
|
|
#define STO_PPC64_LOCAL_MASK (7 << STO_PPC64_LOCAL_BIT)
|
|
#define PPC64_LOCAL_ENTRY_OFFSET(other) \
|
|
(((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2)
|
|
|
|
static unsigned int local_entry_offset(const Elf64_Sym *sym)
|
|
{
|
|
/* sym->st_other indicates offset to local entry point
|
|
* (otherwise it will assume r12 is the address of the start
|
|
* of function and try to derive r2 from it). */
|
|
return PPC64_LOCAL_ENTRY_OFFSET(sym->st_other);
|
|
}
|
|
#else
|
|
|
|
/* An address is address of the OPD entry, which contains address of fn. */
|
|
typedef struct ppc64_opd_entry func_desc_t;
|
|
|
|
static func_desc_t func_desc(unsigned long addr)
|
|
{
|
|
return *(struct ppc64_opd_entry *)addr;
|
|
}
|
|
static unsigned long func_addr(unsigned long addr)
|
|
{
|
|
return func_desc(addr).funcaddr;
|
|
}
|
|
static unsigned long stub_func_addr(func_desc_t func)
|
|
{
|
|
return func.funcaddr;
|
|
}
|
|
static unsigned int local_entry_offset(const Elf64_Sym *sym)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#define STUB_MAGIC 0x73747562 /* stub */
|
|
|
|
/* Like PPC32, we need little trampolines to do > 24-bit jumps (into
|
|
the kernel itself). But on PPC64, these need to be used for every
|
|
jump, actually, to reset r2 (TOC+0x8000). */
|
|
struct ppc64_stub_entry
|
|
{
|
|
/* 28 byte jump instruction sequence (7 instructions). We only
|
|
* need 6 instructions on ABIv2 but we always allocate 7 so
|
|
* so we don't have to modify the trampoline load instruction. */
|
|
u32 jump[7];
|
|
/* Used by ftrace to identify stubs */
|
|
u32 magic;
|
|
/* Data for the above code */
|
|
func_desc_t funcdata;
|
|
};
|
|
|
|
/*
|
|
* PPC64 uses 24 bit jumps, but we need to jump into other modules or
|
|
* the kernel which may be further. So we jump to a stub.
|
|
*
|
|
* For ELFv1 we need to use this to set up the new r2 value (aka TOC
|
|
* pointer). For ELFv2 it's the callee's responsibility to set up the
|
|
* new r2, but for both we need to save the old r2.
|
|
*
|
|
* We could simply patch the new r2 value and function pointer into
|
|
* the stub, but it's significantly shorter to put these values at the
|
|
* end of the stub code, and patch the stub address (32-bits relative
|
|
* to the TOC ptr, r2) into the stub.
|
|
*/
|
|
|
|
static u32 ppc64_stub_insns[] = {
|
|
0x3d620000, /* addis r11,r2, <high> */
|
|
0x396b0000, /* addi r11,r11, <low> */
|
|
/* Save current r2 value in magic place on the stack. */
|
|
0xf8410000|R2_STACK_OFFSET, /* std r2,R2_STACK_OFFSET(r1) */
|
|
0xe98b0020, /* ld r12,32(r11) */
|
|
#ifdef PPC64_ELF_ABI_v1
|
|
/* Set up new r2 from function descriptor */
|
|
0xe84b0028, /* ld r2,40(r11) */
|
|
#endif
|
|
0x7d8903a6, /* mtctr r12 */
|
|
0x4e800420 /* bctr */
|
|
};
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
int module_trampoline_target(struct module *mod, unsigned long addr,
|
|
unsigned long *target)
|
|
{
|
|
struct ppc64_stub_entry *stub;
|
|
func_desc_t funcdata;
|
|
u32 magic;
|
|
|
|
if (!within_module_core(addr, mod)) {
|
|
pr_err("%s: stub %lx not in module %s\n", __func__, addr, mod->name);
|
|
return -EFAULT;
|
|
}
|
|
|
|
stub = (struct ppc64_stub_entry *)addr;
|
|
|
|
if (probe_kernel_read(&magic, &stub->magic, sizeof(magic))) {
|
|
pr_err("%s: fault reading magic for stub %lx for %s\n", __func__, addr, mod->name);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (magic != STUB_MAGIC) {
|
|
pr_err("%s: bad magic for stub %lx for %s\n", __func__, addr, mod->name);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (probe_kernel_read(&funcdata, &stub->funcdata, sizeof(funcdata))) {
|
|
pr_err("%s: fault reading funcdata for stub %lx for %s\n", __func__, addr, mod->name);
|
|
return -EFAULT;
|
|
}
|
|
|
|
*target = stub_func_addr(funcdata);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* Count how many different 24-bit relocations (different symbol,
|
|
different addend) */
|
|
static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
|
|
{
|
|
unsigned int i, r_info, r_addend, _count_relocs;
|
|
|
|
/* FIXME: Only count external ones --RR */
|
|
_count_relocs = 0;
|
|
r_info = 0;
|
|
r_addend = 0;
|
|
for (i = 0; i < num; i++)
|
|
/* Only count 24-bit relocs, others don't need stubs */
|
|
if (ELF64_R_TYPE(rela[i].r_info) == R_PPC_REL24 &&
|
|
(r_info != ELF64_R_SYM(rela[i].r_info) ||
|
|
r_addend != rela[i].r_addend)) {
|
|
_count_relocs++;
|
|
r_info = ELF64_R_SYM(rela[i].r_info);
|
|
r_addend = rela[i].r_addend;
|
|
}
|
|
|
|
return _count_relocs;
|
|
}
|
|
|
|
static int relacmp(const void *_x, const void *_y)
|
|
{
|
|
const Elf64_Rela *x, *y;
|
|
|
|
y = (Elf64_Rela *)_x;
|
|
x = (Elf64_Rela *)_y;
|
|
|
|
/* Compare the entire r_info (as opposed to ELF64_R_SYM(r_info) only) to
|
|
* make the comparison cheaper/faster. It won't affect the sorting or
|
|
* the counting algorithms' performance
|
|
*/
|
|
if (x->r_info < y->r_info)
|
|
return -1;
|
|
else if (x->r_info > y->r_info)
|
|
return 1;
|
|
else if (x->r_addend < y->r_addend)
|
|
return -1;
|
|
else if (x->r_addend > y->r_addend)
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static void relaswap(void *_x, void *_y, int size)
|
|
{
|
|
uint64_t *x, *y, tmp;
|
|
int i;
|
|
|
|
y = (uint64_t *)_x;
|
|
x = (uint64_t *)_y;
|
|
|
|
for (i = 0; i < sizeof(Elf64_Rela) / sizeof(uint64_t); i++) {
|
|
tmp = x[i];
|
|
x[i] = y[i];
|
|
y[i] = tmp;
|
|
}
|
|
}
|
|
|
|
/* Get size of potential trampolines required. */
|
|
static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
|
|
const Elf64_Shdr *sechdrs)
|
|
{
|
|
/* One extra reloc so it's always 0-funcaddr terminated */
|
|
unsigned long relocs = 1;
|
|
unsigned i;
|
|
|
|
/* Every relocated section... */
|
|
for (i = 1; i < hdr->e_shnum; i++) {
|
|
if (sechdrs[i].sh_type == SHT_RELA) {
|
|
pr_debug("Found relocations in section %u\n", i);
|
|
pr_debug("Ptr: %p. Number: %Lu\n",
|
|
(void *)sechdrs[i].sh_addr,
|
|
sechdrs[i].sh_size / sizeof(Elf64_Rela));
|
|
|
|
/* Sort the relocation information based on a symbol and
|
|
* addend key. This is a stable O(n*log n) complexity
|
|
* alogrithm but it will reduce the complexity of
|
|
* count_relocs() to linear complexity O(n)
|
|
*/
|
|
sort((void *)sechdrs[i].sh_addr,
|
|
sechdrs[i].sh_size / sizeof(Elf64_Rela),
|
|
sizeof(Elf64_Rela), relacmp, relaswap);
|
|
|
|
relocs += count_relocs((void *)sechdrs[i].sh_addr,
|
|
sechdrs[i].sh_size
|
|
/ sizeof(Elf64_Rela));
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
/* make the trampoline to the ftrace_caller */
|
|
relocs++;
|
|
#endif
|
|
|
|
pr_debug("Looks like a total of %lu stubs, max\n", relocs);
|
|
return relocs * sizeof(struct ppc64_stub_entry);
|
|
}
|
|
|
|
/* Still needed for ELFv2, for .TOC. */
|
|
static void dedotify_versions(struct modversion_info *vers,
|
|
unsigned long size)
|
|
{
|
|
struct modversion_info *end;
|
|
|
|
for (end = (void *)vers + size; vers < end; vers++)
|
|
if (vers->name[0] == '.') {
|
|
memmove(vers->name, vers->name+1, strlen(vers->name));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Undefined symbols which refer to .funcname, hack to funcname. Make .TOC.
|
|
* seem to be defined (value set later).
|
|
*/
|
|
static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 1; i < numsyms; i++) {
|
|
if (syms[i].st_shndx == SHN_UNDEF) {
|
|
char *name = strtab + syms[i].st_name;
|
|
if (name[0] == '.') {
|
|
if (strcmp(name+1, "TOC.") == 0)
|
|
syms[i].st_shndx = SHN_ABS;
|
|
syms[i].st_name++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static Elf64_Sym *find_dot_toc(Elf64_Shdr *sechdrs,
|
|
const char *strtab,
|
|
unsigned int symindex)
|
|
{
|
|
unsigned int i, numsyms;
|
|
Elf64_Sym *syms;
|
|
|
|
syms = (Elf64_Sym *)sechdrs[symindex].sh_addr;
|
|
numsyms = sechdrs[symindex].sh_size / sizeof(Elf64_Sym);
|
|
|
|
for (i = 1; i < numsyms; i++) {
|
|
if (syms[i].st_shndx == SHN_ABS
|
|
&& strcmp(strtab + syms[i].st_name, "TOC.") == 0)
|
|
return &syms[i];
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
int module_frob_arch_sections(Elf64_Ehdr *hdr,
|
|
Elf64_Shdr *sechdrs,
|
|
char *secstrings,
|
|
struct module *me)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Find .toc and .stubs sections, symtab and strtab */
|
|
for (i = 1; i < hdr->e_shnum; i++) {
|
|
char *p;
|
|
if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0)
|
|
me->arch.stubs_section = i;
|
|
else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0)
|
|
me->arch.toc_section = i;
|
|
else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0)
|
|
dedotify_versions((void *)hdr + sechdrs[i].sh_offset,
|
|
sechdrs[i].sh_size);
|
|
|
|
/* We don't handle .init for the moment: rename to _init */
|
|
while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init")))
|
|
p[0] = '_';
|
|
|
|
if (sechdrs[i].sh_type == SHT_SYMTAB)
|
|
dedotify((void *)hdr + sechdrs[i].sh_offset,
|
|
sechdrs[i].sh_size / sizeof(Elf64_Sym),
|
|
(void *)hdr
|
|
+ sechdrs[sechdrs[i].sh_link].sh_offset);
|
|
}
|
|
|
|
if (!me->arch.stubs_section) {
|
|
pr_err("%s: doesn't contain .stubs.\n", me->name);
|
|
return -ENOEXEC;
|
|
}
|
|
|
|
/* If we don't have a .toc, just use .stubs. We need to set r2
|
|
to some reasonable value in case the module calls out to
|
|
other functions via a stub, or if a function pointer escapes
|
|
the module by some means. */
|
|
if (!me->arch.toc_section)
|
|
me->arch.toc_section = me->arch.stubs_section;
|
|
|
|
/* Override the stubs size */
|
|
sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
|
|
return 0;
|
|
}
|
|
|
|
/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this
|
|
gives the value maximum span in an instruction which uses a signed
|
|
offset) */
|
|
static inline unsigned long my_r2(const Elf64_Shdr *sechdrs, struct module *me)
|
|
{
|
|
return sechdrs[me->arch.toc_section].sh_addr + 0x8000;
|
|
}
|
|
|
|
/* Both low and high 16 bits are added as SIGNED additions, so if low
|
|
16 bits has high bit set, high 16 bits must be adjusted. These
|
|
macros do that (stolen from binutils). */
|
|
#define PPC_LO(v) ((v) & 0xffff)
|
|
#define PPC_HI(v) (((v) >> 16) & 0xffff)
|
|
#define PPC_HA(v) PPC_HI ((v) + 0x8000)
|
|
|
|
/* Patch stub to reference function and correct r2 value. */
|
|
static inline int create_stub(const Elf64_Shdr *sechdrs,
|
|
struct ppc64_stub_entry *entry,
|
|
unsigned long addr,
|
|
struct module *me)
|
|
{
|
|
long reladdr;
|
|
|
|
memcpy(entry->jump, ppc64_stub_insns, sizeof(ppc64_stub_insns));
|
|
|
|
/* Stub uses address relative to r2. */
|
|
reladdr = (unsigned long)entry - my_r2(sechdrs, me);
|
|
if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) {
|
|
pr_err("%s: Address %p of stub out of range of %p.\n",
|
|
me->name, (void *)reladdr, (void *)my_r2);
|
|
return 0;
|
|
}
|
|
pr_debug("Stub %p get data from reladdr %li\n", entry, reladdr);
|
|
|
|
entry->jump[0] |= PPC_HA(reladdr);
|
|
entry->jump[1] |= PPC_LO(reladdr);
|
|
entry->funcdata = func_desc(addr);
|
|
entry->magic = STUB_MAGIC;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Create stub to jump to function described in this OPD/ptr: we need the
|
|
stub to set up the TOC ptr (r2) for the function. */
|
|
static unsigned long stub_for_addr(const Elf64_Shdr *sechdrs,
|
|
unsigned long addr,
|
|
struct module *me)
|
|
{
|
|
struct ppc64_stub_entry *stubs;
|
|
unsigned int i, num_stubs;
|
|
|
|
num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs);
|
|
|
|
/* Find this stub, or if that fails, the next avail. entry */
|
|
stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr;
|
|
for (i = 0; stub_func_addr(stubs[i].funcdata); i++) {
|
|
BUG_ON(i >= num_stubs);
|
|
|
|
if (stub_func_addr(stubs[i].funcdata) == func_addr(addr))
|
|
return (unsigned long)&stubs[i];
|
|
}
|
|
|
|
if (!create_stub(sechdrs, &stubs[i], addr, me))
|
|
return 0;
|
|
|
|
return (unsigned long)&stubs[i];
|
|
}
|
|
|
|
#ifdef CC_USING_MPROFILE_KERNEL
|
|
static bool is_early_mcount_callsite(u32 *instruction)
|
|
{
|
|
/*
|
|
* Check if this is one of the -mprofile-kernel sequences.
|
|
*/
|
|
if (instruction[-1] == PPC_INST_STD_LR &&
|
|
instruction[-2] == PPC_INST_MFLR)
|
|
return true;
|
|
|
|
if (instruction[-1] == PPC_INST_MFLR)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* In case of _mcount calls, do not save the current callee's TOC (in r2) into
|
|
* the original caller's stack frame. If we did we would clobber the saved TOC
|
|
* value of the original caller.
|
|
*/
|
|
static void squash_toc_save_inst(const char *name, unsigned long addr)
|
|
{
|
|
struct ppc64_stub_entry *stub = (struct ppc64_stub_entry *)addr;
|
|
|
|
/* Only for calls to _mcount */
|
|
if (strcmp("_mcount", name) != 0)
|
|
return;
|
|
|
|
stub->jump[2] = PPC_INST_NOP;
|
|
}
|
|
#else
|
|
static void squash_toc_save_inst(const char *name, unsigned long addr) { }
|
|
|
|
/* without -mprofile-kernel, mcount calls are never early */
|
|
static bool is_early_mcount_callsite(u32 *instruction)
|
|
{
|
|
return false;
|
|
}
|
|
#endif
|
|
|
|
/* We expect a noop next: if it is, replace it with instruction to
|
|
restore r2. */
|
|
static int restore_r2(u32 *instruction, struct module *me)
|
|
{
|
|
if (is_early_mcount_callsite(instruction - 1))
|
|
return 1;
|
|
|
|
if (*instruction != PPC_INST_NOP) {
|
|
pr_err("%s: Expect noop after relocate, got %08x\n",
|
|
me->name, *instruction);
|
|
return 0;
|
|
}
|
|
/* ld r2,R2_STACK_OFFSET(r1) */
|
|
*instruction = PPC_INST_LD_TOC;
|
|
return 1;
|
|
}
|
|
|
|
int apply_relocate_add(Elf64_Shdr *sechdrs,
|
|
const char *strtab,
|
|
unsigned int symindex,
|
|
unsigned int relsec,
|
|
struct module *me)
|
|
{
|
|
unsigned int i;
|
|
Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr;
|
|
Elf64_Sym *sym;
|
|
unsigned long *location;
|
|
unsigned long value;
|
|
|
|
pr_debug("Applying ADD relocate section %u to %u\n", relsec,
|
|
sechdrs[relsec].sh_info);
|
|
|
|
/* First time we're called, we can fix up .TOC. */
|
|
if (!me->arch.toc_fixed) {
|
|
sym = find_dot_toc(sechdrs, strtab, symindex);
|
|
/* It's theoretically possible that a module doesn't want a
|
|
* .TOC. so don't fail it just for that. */
|
|
if (sym)
|
|
sym->st_value = my_r2(sechdrs, me);
|
|
me->arch.toc_fixed = true;
|
|
}
|
|
|
|
for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
|
|
/* This is where to make the change */
|
|
location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
|
|
+ rela[i].r_offset;
|
|
/* This is the symbol it is referring to */
|
|
sym = (Elf64_Sym *)sechdrs[symindex].sh_addr
|
|
+ ELF64_R_SYM(rela[i].r_info);
|
|
|
|
pr_debug("RELOC at %p: %li-type as %s (0x%lx) + %li\n",
|
|
location, (long)ELF64_R_TYPE(rela[i].r_info),
|
|
strtab + sym->st_name, (unsigned long)sym->st_value,
|
|
(long)rela[i].r_addend);
|
|
|
|
/* `Everything is relative'. */
|
|
value = sym->st_value + rela[i].r_addend;
|
|
|
|
switch (ELF64_R_TYPE(rela[i].r_info)) {
|
|
case R_PPC64_ADDR32:
|
|
/* Simply set it */
|
|
*(u32 *)location = value;
|
|
break;
|
|
|
|
case R_PPC64_ADDR64:
|
|
/* Simply set it */
|
|
*(unsigned long *)location = value;
|
|
break;
|
|
|
|
case R_PPC64_TOC:
|
|
*(unsigned long *)location = my_r2(sechdrs, me);
|
|
break;
|
|
|
|
case R_PPC64_TOC16:
|
|
/* Subtract TOC pointer */
|
|
value -= my_r2(sechdrs, me);
|
|
if (value + 0x8000 > 0xffff) {
|
|
pr_err("%s: bad TOC16 relocation (0x%lx)\n",
|
|
me->name, value);
|
|
return -ENOEXEC;
|
|
}
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xffff)
|
|
| (value & 0xffff);
|
|
break;
|
|
|
|
case R_PPC64_TOC16_LO:
|
|
/* Subtract TOC pointer */
|
|
value -= my_r2(sechdrs, me);
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xffff)
|
|
| (value & 0xffff);
|
|
break;
|
|
|
|
case R_PPC64_TOC16_DS:
|
|
/* Subtract TOC pointer */
|
|
value -= my_r2(sechdrs, me);
|
|
if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
|
|
pr_err("%s: bad TOC16_DS relocation (0x%lx)\n",
|
|
me->name, value);
|
|
return -ENOEXEC;
|
|
}
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xfffc)
|
|
| (value & 0xfffc);
|
|
break;
|
|
|
|
case R_PPC64_TOC16_LO_DS:
|
|
/* Subtract TOC pointer */
|
|
value -= my_r2(sechdrs, me);
|
|
if ((value & 3) != 0) {
|
|
pr_err("%s: bad TOC16_LO_DS relocation (0x%lx)\n",
|
|
me->name, value);
|
|
return -ENOEXEC;
|
|
}
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xfffc)
|
|
| (value & 0xfffc);
|
|
break;
|
|
|
|
case R_PPC64_TOC16_HA:
|
|
/* Subtract TOC pointer */
|
|
value -= my_r2(sechdrs, me);
|
|
value = ((value + 0x8000) >> 16);
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xffff)
|
|
| (value & 0xffff);
|
|
break;
|
|
|
|
case R_PPC_REL24:
|
|
/* FIXME: Handle weak symbols here --RR */
|
|
if (sym->st_shndx == SHN_UNDEF) {
|
|
/* External: go via stub */
|
|
value = stub_for_addr(sechdrs, value, me);
|
|
if (!value)
|
|
return -ENOENT;
|
|
if (!restore_r2((u32 *)location + 1, me))
|
|
return -ENOEXEC;
|
|
|
|
squash_toc_save_inst(strtab + sym->st_name, value);
|
|
} else
|
|
value += local_entry_offset(sym);
|
|
|
|
/* Convert value to relative */
|
|
value -= (unsigned long)location;
|
|
if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){
|
|
pr_err("%s: REL24 %li out of range!\n",
|
|
me->name, (long int)value);
|
|
return -ENOEXEC;
|
|
}
|
|
|
|
/* Only replace bits 2 through 26 */
|
|
*(uint32_t *)location
|
|
= (*(uint32_t *)location & ~0x03fffffc)
|
|
| (value & 0x03fffffc);
|
|
break;
|
|
|
|
case R_PPC64_REL64:
|
|
/* 64 bits relative (used by features fixups) */
|
|
*location = value - (unsigned long)location;
|
|
break;
|
|
|
|
case R_PPC64_REL32:
|
|
/* 32 bits relative (used by relative exception tables) */
|
|
*(u32 *)location = value - (unsigned long)location;
|
|
break;
|
|
|
|
case R_PPC64_TOCSAVE:
|
|
/*
|
|
* Marker reloc indicates we don't have to save r2.
|
|
* That would only save us one instruction, so ignore
|
|
* it.
|
|
*/
|
|
break;
|
|
|
|
case R_PPC64_ENTRY:
|
|
/*
|
|
* Optimize ELFv2 large code model entry point if
|
|
* the TOC is within 2GB range of current location.
|
|
*/
|
|
value = my_r2(sechdrs, me) - (unsigned long)location;
|
|
if (value + 0x80008000 > 0xffffffff)
|
|
break;
|
|
/*
|
|
* Check for the large code model prolog sequence:
|
|
* ld r2, ...(r12)
|
|
* add r2, r2, r12
|
|
*/
|
|
if ((((uint32_t *)location)[0] & ~0xfffc)
|
|
!= 0xe84c0000)
|
|
break;
|
|
if (((uint32_t *)location)[1] != 0x7c426214)
|
|
break;
|
|
/*
|
|
* If found, replace it with:
|
|
* addis r2, r12, (.TOC.-func)@ha
|
|
* addi r2, r12, (.TOC.-func)@l
|
|
*/
|
|
((uint32_t *)location)[0] = 0x3c4c0000 + PPC_HA(value);
|
|
((uint32_t *)location)[1] = 0x38420000 + PPC_LO(value);
|
|
break;
|
|
|
|
case R_PPC64_REL16_HA:
|
|
/* Subtract location pointer */
|
|
value -= (unsigned long)location;
|
|
value = ((value + 0x8000) >> 16);
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xffff)
|
|
| (value & 0xffff);
|
|
break;
|
|
|
|
case R_PPC64_REL16_LO:
|
|
/* Subtract location pointer */
|
|
value -= (unsigned long)location;
|
|
*((uint16_t *) location)
|
|
= (*((uint16_t *) location) & ~0xffff)
|
|
| (value & 0xffff);
|
|
break;
|
|
|
|
default:
|
|
pr_err("%s: Unknown ADD relocation: %lu\n",
|
|
me->name,
|
|
(unsigned long)ELF64_R_TYPE(rela[i].r_info));
|
|
return -ENOEXEC;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DYNAMIC_FTRACE
|
|
|
|
#ifdef CC_USING_MPROFILE_KERNEL
|
|
|
|
#define PACATOC offsetof(struct paca_struct, kernel_toc)
|
|
|
|
/*
|
|
* For mprofile-kernel we use a special stub for ftrace_caller() because we
|
|
* can't rely on r2 containing this module's TOC when we enter the stub.
|
|
*
|
|
* That can happen if the function calling us didn't need to use the toc. In
|
|
* that case it won't have setup r2, and the r2 value will be either the
|
|
* kernel's toc, or possibly another modules toc.
|
|
*
|
|
* To deal with that this stub uses the kernel toc, which is always accessible
|
|
* via the paca (in r13). The target (ftrace_caller()) is responsible for
|
|
* saving and restoring the toc before returning.
|
|
*/
|
|
static unsigned long create_ftrace_stub(const Elf64_Shdr *sechdrs, struct module *me)
|
|
{
|
|
struct ppc64_stub_entry *entry;
|
|
unsigned int i, num_stubs;
|
|
static u32 stub_insns[] = {
|
|
0xe98d0000 | PACATOC, /* ld r12,PACATOC(r13) */
|
|
0x3d8c0000, /* addis r12,r12,<high> */
|
|
0x398c0000, /* addi r12,r12,<low> */
|
|
0x7d8903a6, /* mtctr r12 */
|
|
0x4e800420, /* bctr */
|
|
};
|
|
long reladdr;
|
|
|
|
num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*entry);
|
|
|
|
/* Find the next available stub entry */
|
|
entry = (void *)sechdrs[me->arch.stubs_section].sh_addr;
|
|
for (i = 0; i < num_stubs && stub_func_addr(entry->funcdata); i++, entry++);
|
|
|
|
if (i >= num_stubs) {
|
|
pr_err("%s: Unable to find a free slot for ftrace stub.\n", me->name);
|
|
return 0;
|
|
}
|
|
|
|
memcpy(entry->jump, stub_insns, sizeof(stub_insns));
|
|
|
|
/* Stub uses address relative to kernel toc (from the paca) */
|
|
reladdr = (unsigned long)ftrace_caller - kernel_toc_addr();
|
|
if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) {
|
|
pr_err("%s: Address of ftrace_caller out of range of kernel_toc.\n", me->name);
|
|
return 0;
|
|
}
|
|
|
|
entry->jump[1] |= PPC_HA(reladdr);
|
|
entry->jump[2] |= PPC_LO(reladdr);
|
|
|
|
/* Eventhough we don't use funcdata in the stub, it's needed elsewhere. */
|
|
entry->funcdata = func_desc((unsigned long)ftrace_caller);
|
|
entry->magic = STUB_MAGIC;
|
|
|
|
return (unsigned long)entry;
|
|
}
|
|
#else
|
|
static unsigned long create_ftrace_stub(const Elf64_Shdr *sechdrs, struct module *me)
|
|
{
|
|
return stub_for_addr(sechdrs, (unsigned long)ftrace_caller, me);
|
|
}
|
|
#endif
|
|
|
|
int module_finalize_ftrace(struct module *mod, const Elf_Shdr *sechdrs)
|
|
{
|
|
mod->arch.toc = my_r2(sechdrs, mod);
|
|
mod->arch.tramp = create_ftrace_stub(sechdrs, mod);
|
|
|
|
if (!mod->arch.tramp)
|
|
return -ENOENT;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|