mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
0df0914d41
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
428 lines
12 KiB
C
428 lines
12 KiB
C
/*
|
|
* linux/arch/arm/plat-omap/sram.c
|
|
*
|
|
* OMAP SRAM detection and management
|
|
*
|
|
* Copyright (C) 2005 Nokia Corporation
|
|
* Written by Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/omapfb.h>
|
|
|
|
#include <asm/tlb.h>
|
|
#include <asm/cacheflush.h>
|
|
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/sram.h>
|
|
#include <plat/board.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/vram.h>
|
|
|
|
#include "sram.h"
|
|
#include "fb.h"
|
|
|
|
/* XXX These "sideways" includes are a sign that something is wrong */
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
# include "../mach-omap2/prm2xxx_3xxx.h"
|
|
# include "../mach-omap2/sdrc.h"
|
|
#endif
|
|
|
|
#define OMAP1_SRAM_PA 0x20000000
|
|
#define OMAP1_SRAM_VA VMALLOC_END
|
|
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
|
|
#define OMAP2_SRAM_VA 0xfe400000
|
|
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
|
|
#define OMAP3_SRAM_VA 0xfe400000
|
|
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
|
|
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
|
|
#define OMAP4_SRAM_VA 0xfe400000
|
|
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
|
|
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
|
|
|
|
#if defined(CONFIG_ARCH_OMAP2PLUS)
|
|
#define SRAM_BOOTLOADER_SZ 0x00
|
|
#else
|
|
#define SRAM_BOOTLOADER_SZ 0x80
|
|
#endif
|
|
|
|
#define OMAP24XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68005048)
|
|
#define OMAP24XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68005050)
|
|
#define OMAP24XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68005058)
|
|
|
|
#define OMAP34XX_VA_REQINFOPERM0 OMAP2_L3_IO_ADDRESS(0x68012848)
|
|
#define OMAP34XX_VA_READPERM0 OMAP2_L3_IO_ADDRESS(0x68012850)
|
|
#define OMAP34XX_VA_WRITEPERM0 OMAP2_L3_IO_ADDRESS(0x68012858)
|
|
#define OMAP34XX_VA_ADDR_MATCH2 OMAP2_L3_IO_ADDRESS(0x68012880)
|
|
#define OMAP34XX_VA_SMS_RG_ATT0 OMAP2_L3_IO_ADDRESS(0x6C000048)
|
|
|
|
#define GP_DEVICE 0x300
|
|
|
|
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
|
|
|
|
static unsigned long omap_sram_start;
|
|
static unsigned long omap_sram_base;
|
|
static unsigned long omap_sram_size;
|
|
static unsigned long omap_sram_ceil;
|
|
|
|
/*
|
|
* Depending on the target RAMFS firewall setup, the public usable amount of
|
|
* SRAM varies. The default accessible size for all device types is 2k. A GP
|
|
* device allows ARM11 but not other initiators for full size. This
|
|
* functionality seems ok until some nice security API happens.
|
|
*/
|
|
static int is_sram_locked(void)
|
|
{
|
|
if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
|
|
/* RAMFW: R/W access to all initiators for all qualifier sets */
|
|
if (cpu_is_omap242x()) {
|
|
__raw_writel(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
|
|
__raw_writel(0xCFDE, OMAP24XX_VA_READPERM0); /* all i-read */
|
|
__raw_writel(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
|
|
}
|
|
if (cpu_is_omap34xx()) {
|
|
__raw_writel(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
|
|
__raw_writel(0xFFFF, OMAP34XX_VA_READPERM0); /* all i-read */
|
|
__raw_writel(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
|
|
__raw_writel(0x0, OMAP34XX_VA_ADDR_MATCH2);
|
|
__raw_writel(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
|
|
}
|
|
return 0;
|
|
} else
|
|
return 1; /* assume locked with no PPA or security driver */
|
|
}
|
|
|
|
/*
|
|
* The amount of SRAM depends on the core type.
|
|
* Note that we cannot try to test for SRAM here because writes
|
|
* to secure SRAM will hang the system. Also the SRAM is not
|
|
* yet mapped at this point.
|
|
*/
|
|
static void __init omap_detect_sram(void)
|
|
{
|
|
unsigned long reserved;
|
|
|
|
if (cpu_class_is_omap2()) {
|
|
if (is_sram_locked()) {
|
|
if (cpu_is_omap34xx()) {
|
|
omap_sram_base = OMAP3_SRAM_PUB_VA;
|
|
omap_sram_start = OMAP3_SRAM_PUB_PA;
|
|
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
|
|
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
|
|
omap_sram_size = 0x7000; /* 28K */
|
|
} else {
|
|
omap_sram_size = 0x8000; /* 32K */
|
|
}
|
|
} else if (cpu_is_omap44xx()) {
|
|
omap_sram_base = OMAP4_SRAM_PUB_VA;
|
|
omap_sram_start = OMAP4_SRAM_PUB_PA;
|
|
omap_sram_size = 0xa000; /* 40K */
|
|
} else {
|
|
omap_sram_base = OMAP2_SRAM_PUB_VA;
|
|
omap_sram_start = OMAP2_SRAM_PUB_PA;
|
|
omap_sram_size = 0x800; /* 2K */
|
|
}
|
|
} else {
|
|
if (cpu_is_omap34xx()) {
|
|
omap_sram_base = OMAP3_SRAM_VA;
|
|
omap_sram_start = OMAP3_SRAM_PA;
|
|
omap_sram_size = 0x10000; /* 64K */
|
|
} else if (cpu_is_omap44xx()) {
|
|
omap_sram_base = OMAP4_SRAM_VA;
|
|
omap_sram_start = OMAP4_SRAM_PA;
|
|
omap_sram_size = 0xe000; /* 56K */
|
|
} else {
|
|
omap_sram_base = OMAP2_SRAM_VA;
|
|
omap_sram_start = OMAP2_SRAM_PA;
|
|
if (cpu_is_omap242x())
|
|
omap_sram_size = 0xa0000; /* 640K */
|
|
else if (cpu_is_omap243x())
|
|
omap_sram_size = 0x10000; /* 64K */
|
|
}
|
|
}
|
|
} else {
|
|
omap_sram_base = OMAP1_SRAM_VA;
|
|
omap_sram_start = OMAP1_SRAM_PA;
|
|
|
|
if (cpu_is_omap7xx())
|
|
omap_sram_size = 0x32000; /* 200K */
|
|
else if (cpu_is_omap15xx())
|
|
omap_sram_size = 0x30000; /* 192K */
|
|
else if (cpu_is_omap1610() || cpu_is_omap1621() ||
|
|
cpu_is_omap1710())
|
|
omap_sram_size = 0x4000; /* 16K */
|
|
else if (cpu_is_omap1611())
|
|
omap_sram_size = SZ_256K;
|
|
else {
|
|
printk(KERN_ERR "Could not detect SRAM size\n");
|
|
omap_sram_size = 0x4000;
|
|
}
|
|
}
|
|
reserved = omapfb_reserve_sram(omap_sram_start, omap_sram_base,
|
|
omap_sram_size,
|
|
omap_sram_start + SRAM_BOOTLOADER_SZ,
|
|
omap_sram_size - SRAM_BOOTLOADER_SZ);
|
|
omap_sram_size -= reserved;
|
|
|
|
reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
|
|
omap_sram_size,
|
|
omap_sram_start + SRAM_BOOTLOADER_SZ,
|
|
omap_sram_size - SRAM_BOOTLOADER_SZ);
|
|
omap_sram_size -= reserved;
|
|
|
|
omap_sram_ceil = omap_sram_base + omap_sram_size;
|
|
}
|
|
|
|
static struct map_desc omap_sram_io_desc[] __initdata = {
|
|
{ /* .length gets filled in at runtime */
|
|
.virtual = OMAP1_SRAM_VA,
|
|
.pfn = __phys_to_pfn(OMAP1_SRAM_PA),
|
|
.type = MT_MEMORY
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
|
|
*/
|
|
static void __init omap_map_sram(void)
|
|
{
|
|
unsigned long base;
|
|
|
|
if (omap_sram_size == 0)
|
|
return;
|
|
|
|
if (cpu_is_omap34xx()) {
|
|
/*
|
|
* SRAM must be marked as non-cached on OMAP3 since the
|
|
* CORE DPLL M2 divider change code (in SRAM) runs with the
|
|
* SDRAM controller disabled, and if it is marked cached,
|
|
* the ARM may attempt to write cache lines back to SDRAM
|
|
* which will cause the system to hang.
|
|
*/
|
|
omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
|
|
}
|
|
|
|
omap_sram_io_desc[0].virtual = omap_sram_base;
|
|
base = omap_sram_start;
|
|
base = ROUND_DOWN(base, PAGE_SIZE);
|
|
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
|
|
omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
|
|
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
|
|
|
|
printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
|
|
__pfn_to_phys(omap_sram_io_desc[0].pfn),
|
|
omap_sram_io_desc[0].virtual,
|
|
omap_sram_io_desc[0].length);
|
|
|
|
/*
|
|
* Normally devicemaps_init() would flush caches and tlb after
|
|
* mdesc->map_io(), but since we're called from map_io(), we
|
|
* must do it here.
|
|
*/
|
|
local_flush_tlb_all();
|
|
flush_cache_all();
|
|
|
|
/*
|
|
* Looks like we need to preserve some bootloader code at the
|
|
* beginning of SRAM for jumping to flash for reboot to work...
|
|
*/
|
|
memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
|
|
omap_sram_size - SRAM_BOOTLOADER_SZ);
|
|
}
|
|
|
|
/*
|
|
* Memory allocator for SRAM: calculates the new ceiling address
|
|
* for pushing a function using the fncpy API.
|
|
*
|
|
* Note that fncpy requires the returned address to be aligned
|
|
* to an 8-byte boundary.
|
|
*/
|
|
void *omap_sram_push_address(unsigned long size)
|
|
{
|
|
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
|
|
printk(KERN_ERR "Not enough space in SRAM\n");
|
|
return NULL;
|
|
}
|
|
|
|
omap_sram_ceil -= size;
|
|
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
|
|
|
|
return (void *)omap_sram_ceil;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
|
|
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
|
|
|
|
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
|
|
{
|
|
BUG_ON(!_omap_sram_reprogram_clock);
|
|
_omap_sram_reprogram_clock(dpllctl, ckctl);
|
|
}
|
|
|
|
static int __init omap1_sram_init(void)
|
|
{
|
|
_omap_sram_reprogram_clock =
|
|
omap_sram_push(omap1_sram_reprogram_clock,
|
|
omap1_sram_reprogram_clock_sz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define omap1_sram_init() do {} while (0)
|
|
#endif
|
|
|
|
#if defined(CONFIG_ARCH_OMAP2)
|
|
|
|
static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
|
|
u32 base_cs, u32 force_unlock);
|
|
|
|
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
|
|
u32 base_cs, u32 force_unlock)
|
|
{
|
|
BUG_ON(!_omap2_sram_ddr_init);
|
|
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
|
|
base_cs, force_unlock);
|
|
}
|
|
|
|
static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
|
|
u32 mem_type);
|
|
|
|
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
|
|
{
|
|
BUG_ON(!_omap2_sram_reprogram_sdrc);
|
|
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
|
|
}
|
|
|
|
static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
|
|
|
|
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
|
|
{
|
|
BUG_ON(!_omap2_set_prcm);
|
|
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_OMAP2420
|
|
static int __init omap242x_sram_init(void)
|
|
{
|
|
_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
|
|
omap242x_sram_ddr_init_sz);
|
|
|
|
_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
|
|
omap242x_sram_reprogram_sdrc_sz);
|
|
|
|
_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
|
|
omap242x_sram_set_prcm_sz);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int omap242x_sram_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_OMAP2430
|
|
static int __init omap243x_sram_init(void)
|
|
{
|
|
_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
|
|
omap243x_sram_ddr_init_sz);
|
|
|
|
_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
|
|
omap243x_sram_reprogram_sdrc_sz);
|
|
|
|
_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
|
|
omap243x_sram_set_prcm_sz);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int omap243x_sram_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
|
|
static u32 (*_omap3_sram_configure_core_dpll)(
|
|
u32 m2, u32 unlock_dll, u32 f, u32 inc,
|
|
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
|
|
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
|
|
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
|
|
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
|
|
|
|
u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
|
|
u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
|
|
u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
|
|
u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
|
|
u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
|
|
{
|
|
BUG_ON(!_omap3_sram_configure_core_dpll);
|
|
return _omap3_sram_configure_core_dpll(
|
|
m2, unlock_dll, f, inc,
|
|
sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
|
|
sdrc_actim_ctrl_b_0, sdrc_mr_0,
|
|
sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
|
|
sdrc_actim_ctrl_b_1, sdrc_mr_1);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
void omap3_sram_restore_context(void)
|
|
{
|
|
omap_sram_ceil = omap_sram_base + omap_sram_size;
|
|
|
|
_omap3_sram_configure_core_dpll =
|
|
omap_sram_push(omap3_sram_configure_core_dpll,
|
|
omap3_sram_configure_core_dpll_sz);
|
|
omap_push_sram_idle();
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static int __init omap34xx_sram_init(void)
|
|
{
|
|
_omap3_sram_configure_core_dpll =
|
|
omap_sram_push(omap3_sram_configure_core_dpll,
|
|
omap3_sram_configure_core_dpll_sz);
|
|
omap_push_sram_idle();
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int omap34xx_sram_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int __init omap_sram_init(void)
|
|
{
|
|
omap_detect_sram();
|
|
omap_map_sram();
|
|
|
|
if (!(cpu_class_is_omap2()))
|
|
omap1_sram_init();
|
|
else if (cpu_is_omap242x())
|
|
omap242x_sram_init();
|
|
else if (cpu_is_omap2430())
|
|
omap243x_sram_init();
|
|
else if (cpu_is_omap34xx())
|
|
omap34xx_sram_init();
|
|
|
|
return 0;
|
|
}
|