mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 16:54:20 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
321 lines
6.8 KiB
C
321 lines
6.8 KiB
C
/* radio-trust.c - Trust FM Radio card driver for Linux 2.2
|
|
* by Eric Lammerts <eric@scintilla.utwente.nl>
|
|
*
|
|
* Based on radio-aztech.c. Original notes:
|
|
*
|
|
* Adapted to support the Video for Linux API by
|
|
* Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
|
|
*
|
|
* Quay Ly
|
|
* Donald Song
|
|
* Jason Lewis (jlewis@twilight.vtc.vsc.edu)
|
|
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
|
|
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
|
|
*
|
|
* The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
|
|
*/
|
|
|
|
#include <stdarg.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/videodev.h>
|
|
#include <linux/config.h> /* CONFIG_RADIO_TRUST_PORT */
|
|
|
|
/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
|
|
|
|
#ifndef CONFIG_RADIO_TRUST_PORT
|
|
#define CONFIG_RADIO_TRUST_PORT -1
|
|
#endif
|
|
|
|
static int io = CONFIG_RADIO_TRUST_PORT;
|
|
static int radio_nr = -1;
|
|
static int ioval = 0xf;
|
|
static __u16 curvol;
|
|
static __u16 curbass;
|
|
static __u16 curtreble;
|
|
static unsigned long curfreq;
|
|
static int curstereo;
|
|
static int curmute;
|
|
|
|
/* i2c addresses */
|
|
#define TDA7318_ADDR 0x88
|
|
#define TSA6060T_ADDR 0xc4
|
|
|
|
#define TR_DELAY do { inb(io); inb(io); inb(io); } while(0)
|
|
#define TR_SET_SCL outb(ioval |= 2, io)
|
|
#define TR_CLR_SCL outb(ioval &= 0xfd, io)
|
|
#define TR_SET_SDA outb(ioval |= 1, io)
|
|
#define TR_CLR_SDA outb(ioval &= 0xfe, io)
|
|
|
|
static void write_i2c(int n, ...)
|
|
{
|
|
unsigned char val, mask;
|
|
va_list args;
|
|
|
|
va_start(args, n);
|
|
|
|
/* start condition */
|
|
TR_SET_SDA;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_CLR_SDA;
|
|
TR_CLR_SCL;
|
|
TR_DELAY;
|
|
|
|
for(; n; n--) {
|
|
val = va_arg(args, unsigned);
|
|
for(mask = 0x80; mask; mask >>= 1) {
|
|
if(val & mask)
|
|
TR_SET_SDA;
|
|
else
|
|
TR_CLR_SDA;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_CLR_SCL;
|
|
TR_DELAY;
|
|
}
|
|
/* acknowledge bit */
|
|
TR_SET_SDA;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_CLR_SCL;
|
|
TR_DELAY;
|
|
}
|
|
|
|
/* stop condition */
|
|
TR_CLR_SDA;
|
|
TR_DELAY;
|
|
TR_SET_SCL;
|
|
TR_DELAY;
|
|
TR_SET_SDA;
|
|
TR_DELAY;
|
|
|
|
va_end(args);
|
|
}
|
|
|
|
static void tr_setvol(__u16 vol)
|
|
{
|
|
curvol = vol / 2048;
|
|
write_i2c(2, TDA7318_ADDR, curvol ^ 0x1f);
|
|
}
|
|
|
|
static int basstreble2chip[15] = {
|
|
0, 1, 2, 3, 4, 5, 6, 7, 14, 13, 12, 11, 10, 9, 8
|
|
};
|
|
|
|
static void tr_setbass(__u16 bass)
|
|
{
|
|
curbass = bass / 4370;
|
|
write_i2c(2, TDA7318_ADDR, 0x60 | basstreble2chip[curbass]);
|
|
}
|
|
|
|
static void tr_settreble(__u16 treble)
|
|
{
|
|
curtreble = treble / 4370;
|
|
write_i2c(2, TDA7318_ADDR, 0x70 | basstreble2chip[curtreble]);
|
|
}
|
|
|
|
static void tr_setstereo(int stereo)
|
|
{
|
|
curstereo = !!stereo;
|
|
ioval = (ioval & 0xfb) | (!curstereo << 2);
|
|
outb(ioval, io);
|
|
}
|
|
|
|
static void tr_setmute(int mute)
|
|
{
|
|
curmute = !!mute;
|
|
ioval = (ioval & 0xf7) | (curmute << 3);
|
|
outb(ioval, io);
|
|
}
|
|
|
|
static int tr_getsigstr(void)
|
|
{
|
|
int i, v;
|
|
|
|
for(i = 0, v = 0; i < 100; i++) v |= inb(io);
|
|
return (v & 1)? 0 : 0xffff;
|
|
}
|
|
|
|
static int tr_getstereo(void)
|
|
{
|
|
/* don't know how to determine it, just return the setting */
|
|
return curstereo;
|
|
}
|
|
|
|
static void tr_setfreq(unsigned long f)
|
|
{
|
|
f /= 160; /* Convert to 10 kHz units */
|
|
f += 1070; /* Add 10.7 MHz IF */
|
|
|
|
write_i2c(5, TSA6060T_ADDR, (f << 1) | 1, f >> 7, 0x60 | ((f >> 15) & 1), 0);
|
|
}
|
|
|
|
static int tr_do_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, void *arg)
|
|
{
|
|
switch(cmd)
|
|
{
|
|
case VIDIOCGCAP:
|
|
{
|
|
struct video_capability *v = arg;
|
|
|
|
memset(v,0,sizeof(*v));
|
|
v->type=VID_TYPE_TUNER;
|
|
v->channels=1;
|
|
v->audios=1;
|
|
strcpy(v->name, "Trust FM Radio");
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCGTUNER:
|
|
{
|
|
struct video_tuner *v = arg;
|
|
|
|
if(v->tuner) /* Only 1 tuner */
|
|
return -EINVAL;
|
|
|
|
v->rangelow = 87500 * 16;
|
|
v->rangehigh = 108000 * 16;
|
|
v->flags = VIDEO_TUNER_LOW;
|
|
v->mode = VIDEO_MODE_AUTO;
|
|
|
|
v->signal = tr_getsigstr();
|
|
if(tr_getstereo())
|
|
v->flags |= VIDEO_TUNER_STEREO_ON;
|
|
|
|
strcpy(v->name, "FM");
|
|
|
|
return 0;
|
|
}
|
|
case VIDIOCSTUNER:
|
|
{
|
|
struct video_tuner *v = arg;
|
|
if(v->tuner != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
case VIDIOCGFREQ:
|
|
{
|
|
unsigned long *freq = arg;
|
|
*freq = curfreq;
|
|
return 0;
|
|
}
|
|
case VIDIOCSFREQ:
|
|
{
|
|
unsigned long *freq = arg;
|
|
tr_setfreq(*freq);
|
|
return 0;
|
|
}
|
|
case VIDIOCGAUDIO:
|
|
{
|
|
struct video_audio *v = arg;
|
|
|
|
memset(v,0, sizeof(*v));
|
|
v->flags = VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME |
|
|
VIDEO_AUDIO_BASS | VIDEO_AUDIO_TREBLE;
|
|
v->mode = curstereo? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
|
|
v->volume = curvol * 2048;
|
|
v->step = 2048;
|
|
v->bass = curbass * 4370;
|
|
v->treble = curtreble * 4370;
|
|
|
|
strcpy(v->name, "Trust FM Radio");
|
|
return 0;
|
|
}
|
|
case VIDIOCSAUDIO:
|
|
{
|
|
struct video_audio *v = arg;
|
|
|
|
if(v->audio)
|
|
return -EINVAL;
|
|
tr_setvol(v->volume);
|
|
tr_setbass(v->bass);
|
|
tr_settreble(v->treble);
|
|
tr_setstereo(v->mode & VIDEO_SOUND_STEREO);
|
|
tr_setmute(v->flags & VIDEO_AUDIO_MUTE);
|
|
return 0;
|
|
}
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static int tr_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return video_usercopy(inode, file, cmd, arg, tr_do_ioctl);
|
|
}
|
|
|
|
static struct file_operations trust_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = video_exclusive_open,
|
|
.release = video_exclusive_release,
|
|
.ioctl = tr_ioctl,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
static struct video_device trust_radio=
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.name = "Trust FM Radio",
|
|
.type = VID_TYPE_TUNER,
|
|
.hardware = VID_HARDWARE_TRUST,
|
|
.fops = &trust_fops,
|
|
};
|
|
|
|
static int __init trust_init(void)
|
|
{
|
|
if(io == -1) {
|
|
printk(KERN_ERR "You must set an I/O address with io=0x???\n");
|
|
return -EINVAL;
|
|
}
|
|
if(!request_region(io, 2, "Trust FM Radio")) {
|
|
printk(KERN_ERR "trust: port 0x%x already in use\n", io);
|
|
return -EBUSY;
|
|
}
|
|
if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
|
|
{
|
|
release_region(io, 2);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_INFO "Trust FM Radio card driver v1.0.\n");
|
|
|
|
write_i2c(2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0xe0); /* speaker att. RR = 0 dB */
|
|
write_i2c(2, TDA7318_ADDR, 0x40); /* stereo 1 input, gain = 18.75 dB */
|
|
|
|
tr_setvol(0x8000);
|
|
tr_setbass(0x8000);
|
|
tr_settreble(0x8000);
|
|
tr_setstereo(1);
|
|
|
|
/* mute card - prevents noisy bootups */
|
|
tr_setmute(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_AUTHOR("Eric Lammerts, Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
|
|
MODULE_DESCRIPTION("A driver for the Trust FM Radio card.");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC(io, "I/O address of the Trust FM Radio card (0x350 or 0x358)");
|
|
module_param(radio_nr, int, 0);
|
|
|
|
static void __exit cleanup_trust_module(void)
|
|
{
|
|
video_unregister_device(&trust_radio);
|
|
release_region(io, 2);
|
|
}
|
|
|
|
module_init(trust_init);
|
|
module_exit(cleanup_trust_module);
|