mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-26 20:44:32 +08:00
678e75d3e5
Avoid the parent pll for the mod-clk for de_be0 getting disabled when non of the other users are enabled (which can happen when none of i2c, spi and mmc are in use). Note for now we point directly to the parent rather then to the de_be0 mod-clk as that is not modelled in our devicetree yet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
625 lines
15 KiB
Plaintext
625 lines
15 KiB
Plaintext
/*
|
|
* Copyright 2013 Maxime Ripard
|
|
*
|
|
* Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
/include/ "skeleton.dtsi"
|
|
|
|
/ {
|
|
interrupt-parent = <&intc>;
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
};
|
|
|
|
chosen {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
framebuffer0-hdmi {
|
|
compatible = "simple-framebuffer";
|
|
clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
|
|
<&ahb_gates 44>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a8";
|
|
};
|
|
};
|
|
|
|
memory {
|
|
reg = <0x40000000 0x20000000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
/*
|
|
* This is a dummy clock, to be used as placeholder on
|
|
* other mux clocks when a specific parent clock is not
|
|
* yet implemented. It should be dropped when the driver
|
|
* is complete.
|
|
*/
|
|
dummy: dummy {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc24M: clk@01c20050 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-osc-clk";
|
|
reg = <0x01c20050 0x4>;
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "osc24M";
|
|
};
|
|
|
|
osc32k: clk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "osc32k";
|
|
};
|
|
|
|
pll1: clk@01c20000 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20000 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll1";
|
|
};
|
|
|
|
pll4: clk@01c20018 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-pll1-clk";
|
|
reg = <0x01c20018 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll4";
|
|
};
|
|
|
|
pll5: clk@01c20020 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll5-clk";
|
|
reg = <0x01c20020 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll5_ddr", "pll5_other";
|
|
};
|
|
|
|
pll6: clk@01c20028 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-pll6-clk";
|
|
reg = <0x01c20028 0x4>;
|
|
clocks = <&osc24M>;
|
|
clock-output-names = "pll6_sata", "pll6_other", "pll6";
|
|
};
|
|
|
|
/* dummy is 200M */
|
|
cpu: cpu@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-cpu-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
|
|
clock-output-names = "cpu";
|
|
};
|
|
|
|
axi: axi@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-axi-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&cpu>;
|
|
clock-output-names = "axi";
|
|
};
|
|
|
|
axi_gates: clk@01c2005c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun4i-a10-axi-gates-clk";
|
|
reg = <0x01c2005c 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "axi_dram";
|
|
};
|
|
|
|
ahb: ahb@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-ahb-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&axi>;
|
|
clock-output-names = "ahb";
|
|
};
|
|
|
|
ahb_gates: clk@01c20060 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
|
|
reg = <0x01c20060 0x8>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
|
|
"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
|
|
"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
|
|
"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
|
|
"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
|
|
"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
|
|
"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
|
|
};
|
|
|
|
apb0: apb0@01c20054 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb0-clk";
|
|
reg = <0x01c20054 0x4>;
|
|
clocks = <&ahb>;
|
|
clock-output-names = "apb0";
|
|
};
|
|
|
|
apb0_gates: clk@01c20068 {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
|
|
reg = <0x01c20068 0x4>;
|
|
clocks = <&apb0>;
|
|
clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
|
|
"apb0_ir", "apb0_keypad";
|
|
};
|
|
|
|
apb1_mux: apb1_mux@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-mux-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
|
|
clock-output-names = "apb1_mux";
|
|
};
|
|
|
|
apb1: apb1@01c20058 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-apb1-clk";
|
|
reg = <0x01c20058 0x4>;
|
|
clocks = <&apb1_mux>;
|
|
clock-output-names = "apb1";
|
|
};
|
|
|
|
apb1_gates: clk@01c2006c {
|
|
#clock-cells = <1>;
|
|
compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
|
|
reg = <0x01c2006c 0x4>;
|
|
clocks = <&apb1>;
|
|
clock-output-names = "apb1_i2c0", "apb1_i2c1",
|
|
"apb1_i2c2", "apb1_uart0", "apb1_uart1",
|
|
"apb1_uart2", "apb1_uart3";
|
|
};
|
|
|
|
nand_clk: clk@01c20080 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20080 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
ms_clk: clk@01c20084 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20084 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ms";
|
|
};
|
|
|
|
mmc0_clk: clk@01c20088 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20088 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc0";
|
|
};
|
|
|
|
mmc1_clk: clk@01c2008c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2008c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc1";
|
|
};
|
|
|
|
mmc2_clk: clk@01c20090 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20090 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mmc2";
|
|
};
|
|
|
|
ts_clk: clk@01c20098 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c20098 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ts";
|
|
};
|
|
|
|
ss_clk: clk@01c2009c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c2009c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ss";
|
|
};
|
|
|
|
spi0_clk: clk@01c200a0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi0";
|
|
};
|
|
|
|
spi1_clk: clk@01c200a4 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a4 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi1";
|
|
};
|
|
|
|
spi2_clk: clk@01c200a8 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200a8 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "spi2";
|
|
};
|
|
|
|
ir0_clk: clk@01c200b0 {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun4i-a10-mod0-clk";
|
|
reg = <0x01c200b0 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "ir0";
|
|
};
|
|
|
|
usb_clk: clk@01c200cc {
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-usb-clk";
|
|
reg = <0x01c200cc 0x4>;
|
|
clocks = <&pll6 1>;
|
|
clock-output-names = "usb_ohci0", "usb_phy";
|
|
};
|
|
|
|
mbus_clk: clk@01c2015c {
|
|
#clock-cells = <0>;
|
|
compatible = "allwinner,sun5i-a13-mbus-clk";
|
|
reg = <0x01c2015c 0x4>;
|
|
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
|
|
clock-output-names = "mbus";
|
|
};
|
|
};
|
|
|
|
soc@01c00000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
dma: dma-controller@01c02000 {
|
|
compatible = "allwinner,sun4i-a10-dma";
|
|
reg = <0x01c02000 0x1000>;
|
|
interrupts = <27>;
|
|
clocks = <&ahb_gates 6>;
|
|
#dma-cells = <2>;
|
|
};
|
|
|
|
spi0: spi@01c05000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c05000 0x1000>;
|
|
interrupts = <10>;
|
|
clocks = <&ahb_gates 20>, <&spi0_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 1 27>, <&dma 1 26>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@01c06000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c06000 0x1000>;
|
|
interrupts = <11>;
|
|
clocks = <&ahb_gates 21>, <&spi1_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 1 9>, <&dma 1 8>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
emac: ethernet@01c0b000 {
|
|
compatible = "allwinner,sun4i-a10-emac";
|
|
reg = <0x01c0b000 0x1000>;
|
|
interrupts = <55>;
|
|
clocks = <&ahb_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio@01c0b080 {
|
|
compatible = "allwinner,sun4i-a10-mdio";
|
|
reg = <0x01c0b080 0x14>;
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
mmc0: mmc@01c0f000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c0f000 0x1000>;
|
|
clocks = <&ahb_gates 8>, <&mmc0_clk>;
|
|
clock-names = "ahb", "mmc";
|
|
interrupts = <32>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@01c10000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c10000 0x1000>;
|
|
clocks = <&ahb_gates 9>, <&mmc1_clk>;
|
|
clock-names = "ahb", "mmc";
|
|
interrupts = <33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc2: mmc@01c11000 {
|
|
compatible = "allwinner,sun5i-a13-mmc";
|
|
reg = <0x01c11000 0x1000>;
|
|
clocks = <&ahb_gates 10>, <&mmc2_clk>;
|
|
clock-names = "ahb", "mmc";
|
|
interrupts = <34>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy: phy@01c13400 {
|
|
#phy-cells = <1>;
|
|
compatible = "allwinner,sun5i-a13-usb-phy";
|
|
reg = <0x01c13400 0x10 0x01c14800 0x4>;
|
|
reg-names = "phy_ctrl", "pmu1";
|
|
clocks = <&usb_clk 8>;
|
|
clock-names = "usb_phy";
|
|
resets = <&usb_clk 1>;
|
|
reset-names = "usb1_reset";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci0: usb@01c14000 {
|
|
compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
|
|
reg = <0x01c14000 0x100>;
|
|
interrupts = <39>;
|
|
clocks = <&ahb_gates 1>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci0: usb@01c14400 {
|
|
compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
|
|
reg = <0x01c14400 0x100>;
|
|
interrupts = <40>;
|
|
clocks = <&usb_clk 6>, <&ahb_gates 2>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@01c17000 {
|
|
compatible = "allwinner,sun4i-a10-spi";
|
|
reg = <0x01c17000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&ahb_gates 22>, <&spi2_clk>;
|
|
clock-names = "ahb", "mod";
|
|
dmas = <&dma 1 29>, <&dma 1 28>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@01c20400 {
|
|
compatible = "allwinner,sun4i-a10-ic";
|
|
reg = <0x01c20400 0x400>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
pio: pinctrl@01c20800 {
|
|
compatible = "allwinner,sun5i-a10s-pinctrl";
|
|
reg = <0x01c20800 0x400>;
|
|
interrupts = <28>;
|
|
clocks = <&apb0_gates 5>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
#size-cells = <0>;
|
|
#gpio-cells = <3>;
|
|
|
|
uart0_pins_a: uart0@0 {
|
|
allwinner,pins = "PB19", "PB20";
|
|
allwinner,function = "uart0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart2_pins_a: uart2@0 {
|
|
allwinner,pins = "PC18", "PC19";
|
|
allwinner,function = "uart2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
uart3_pins_a: uart3@0 {
|
|
allwinner,pins = "PG9", "PG10";
|
|
allwinner,function = "uart3";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
emac_pins_a: emac0@0 {
|
|
allwinner,pins = "PA0", "PA1", "PA2",
|
|
"PA3", "PA4", "PA5", "PA6",
|
|
"PA7", "PA8", "PA9", "PA10",
|
|
"PA11", "PA12", "PA13", "PA14",
|
|
"PA15", "PA16";
|
|
allwinner,function = "emac";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c0_pins_a: i2c0@0 {
|
|
allwinner,pins = "PB0", "PB1";
|
|
allwinner,function = "i2c0";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c1_pins_a: i2c1@0 {
|
|
allwinner,pins = "PB15", "PB16";
|
|
allwinner,function = "i2c1";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
i2c2_pins_a: i2c2@0 {
|
|
allwinner,pins = "PB17", "PB18";
|
|
allwinner,function = "i2c2";
|
|
allwinner,drive = <0>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
mmc0_pins_a: mmc0@0 {
|
|
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
|
|
allwinner,function = "mmc0";
|
|
allwinner,drive = <2>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
|
|
mmc1_pins_a: mmc1@0 {
|
|
allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
|
|
allwinner,function = "mmc1";
|
|
allwinner,drive = <2>;
|
|
allwinner,pull = <0>;
|
|
};
|
|
};
|
|
|
|
timer@01c20c00 {
|
|
compatible = "allwinner,sun4i-a10-timer";
|
|
reg = <0x01c20c00 0x90>;
|
|
interrupts = <22>;
|
|
clocks = <&osc24M>;
|
|
};
|
|
|
|
wdt: watchdog@01c20c90 {
|
|
compatible = "allwinner,sun4i-a10-wdt";
|
|
reg = <0x01c20c90 0x10>;
|
|
};
|
|
|
|
sid: eeprom@01c23800 {
|
|
compatible = "allwinner,sun4i-a10-sid";
|
|
reg = <0x01c23800 0x10>;
|
|
};
|
|
|
|
rtp: rtp@01c25000 {
|
|
compatible = "allwinner,sun4i-a10-ts";
|
|
reg = <0x01c25000 0x100>;
|
|
interrupts = <29>;
|
|
};
|
|
|
|
uart0: serial@01c28000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28000 0x400>;
|
|
interrupts = <1>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 16>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@01c28400 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28400 0x400>;
|
|
interrupts = <2>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 17>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@01c28800 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28800 0x400>;
|
|
interrupts = <3>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 18>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@01c28c00 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x01c28c00 0x400>;
|
|
interrupts = <4>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
clocks = <&apb1_gates 19>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@01c2ac00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2ac00 0x400>;
|
|
interrupts = <7>;
|
|
clocks = <&apb1_gates 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@01c2b000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2b000 0x400>;
|
|
interrupts = <8>;
|
|
clocks = <&apb1_gates 1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@01c2b400 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
|
|
reg = <0x01c2b400 0x400>;
|
|
interrupts = <9>;
|
|
clocks = <&apb1_gates 2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
timer@01c60000 {
|
|
compatible = "allwinner,sun5i-a13-hstimer";
|
|
reg = <0x01c60000 0x1000>;
|
|
interrupts = <82>, <83>;
|
|
clocks = <&ahb_gates 28>;
|
|
};
|
|
};
|
|
};
|