mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-28 05:24:47 +08:00
abad398337
Temperature reads on bmp280 device always return 0, due to a missing step in the compensation formula (data->tfine is never initialized). Initialize data->tfine value so we get correct temperature and pressure values. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Reviewed-by: Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
417 lines
10 KiB
C
417 lines
10 KiB
C
/*
|
|
* Copyright (c) 2014 Intel Corporation
|
|
*
|
|
* Driver for Bosch Sensortec BMP280 digital pressure sensor.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "bmp280: " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define BMP280_REG_TEMP_XLSB 0xFC
|
|
#define BMP280_REG_TEMP_LSB 0xFB
|
|
#define BMP280_REG_TEMP_MSB 0xFA
|
|
#define BMP280_REG_PRESS_XLSB 0xF9
|
|
#define BMP280_REG_PRESS_LSB 0xF8
|
|
#define BMP280_REG_PRESS_MSB 0xF7
|
|
|
|
#define BMP280_REG_CONFIG 0xF5
|
|
#define BMP280_REG_CTRL_MEAS 0xF4
|
|
#define BMP280_REG_STATUS 0xF3
|
|
#define BMP280_REG_RESET 0xE0
|
|
#define BMP280_REG_ID 0xD0
|
|
|
|
#define BMP280_REG_COMP_TEMP_START 0x88
|
|
#define BMP280_COMP_TEMP_REG_COUNT 6
|
|
|
|
#define BMP280_REG_COMP_PRESS_START 0x8E
|
|
#define BMP280_COMP_PRESS_REG_COUNT 18
|
|
|
|
#define BMP280_FILTER_MASK (BIT(4) | BIT(3) | BIT(2))
|
|
#define BMP280_FILTER_OFF 0
|
|
#define BMP280_FILTER_2X BIT(2)
|
|
#define BMP280_FILTER_4X BIT(3)
|
|
#define BMP280_FILTER_8X (BIT(3) | BIT(2))
|
|
#define BMP280_FILTER_16X BIT(4)
|
|
|
|
#define BMP280_OSRS_TEMP_MASK (BIT(7) | BIT(6) | BIT(5))
|
|
#define BMP280_OSRS_TEMP_SKIP 0
|
|
#define BMP280_OSRS_TEMP_1X BIT(5)
|
|
#define BMP280_OSRS_TEMP_2X BIT(6)
|
|
#define BMP280_OSRS_TEMP_4X (BIT(6) | BIT(5))
|
|
#define BMP280_OSRS_TEMP_8X BIT(7)
|
|
#define BMP280_OSRS_TEMP_16X (BIT(7) | BIT(5))
|
|
|
|
#define BMP280_OSRS_PRESS_MASK (BIT(4) | BIT(3) | BIT(2))
|
|
#define BMP280_OSRS_PRESS_SKIP 0
|
|
#define BMP280_OSRS_PRESS_1X BIT(2)
|
|
#define BMP280_OSRS_PRESS_2X BIT(3)
|
|
#define BMP280_OSRS_PRESS_4X (BIT(3) | BIT(2))
|
|
#define BMP280_OSRS_PRESS_8X BIT(4)
|
|
#define BMP280_OSRS_PRESS_16X (BIT(4) | BIT(2))
|
|
|
|
#define BMP280_MODE_MASK (BIT(1) | BIT(0))
|
|
#define BMP280_MODE_SLEEP 0
|
|
#define BMP280_MODE_FORCED BIT(0)
|
|
#define BMP280_MODE_NORMAL (BIT(1) | BIT(0))
|
|
|
|
#define BMP280_CHIP_ID 0x58
|
|
#define BMP280_SOFT_RESET_VAL 0xB6
|
|
|
|
struct bmp280_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
struct regmap *regmap;
|
|
|
|
/*
|
|
* Carryover value from temperature conversion, used in pressure
|
|
* calculation.
|
|
*/
|
|
s32 t_fine;
|
|
};
|
|
|
|
/*
|
|
* These enums are used for indexing into the array of compensation
|
|
* parameters.
|
|
*/
|
|
enum { T1, T2, T3 };
|
|
enum { P1, P2, P3, P4, P5, P6, P7, P8, P9 };
|
|
|
|
static const struct iio_chan_spec bmp280_channels[] = {
|
|
{
|
|
.type = IIO_PRESSURE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
|
},
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
|
},
|
|
};
|
|
|
|
static bool bmp280_is_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case BMP280_REG_CONFIG:
|
|
case BMP280_REG_CTRL_MEAS:
|
|
case BMP280_REG_RESET:
|
|
return true;
|
|
default:
|
|
return false;
|
|
};
|
|
}
|
|
|
|
static bool bmp280_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case BMP280_REG_TEMP_XLSB:
|
|
case BMP280_REG_TEMP_LSB:
|
|
case BMP280_REG_TEMP_MSB:
|
|
case BMP280_REG_PRESS_XLSB:
|
|
case BMP280_REG_PRESS_LSB:
|
|
case BMP280_REG_PRESS_MSB:
|
|
case BMP280_REG_STATUS:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config bmp280_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.max_register = BMP280_REG_TEMP_XLSB,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
.writeable_reg = bmp280_is_writeable_reg,
|
|
.volatile_reg = bmp280_is_volatile_reg,
|
|
};
|
|
|
|
/*
|
|
* Returns temperature in DegC, resolution is 0.01 DegC. Output value of
|
|
* "5123" equals 51.23 DegC. t_fine carries fine temperature as global
|
|
* value.
|
|
*
|
|
* Taken from datasheet, Section 3.11.3, "Compensation formula".
|
|
*/
|
|
static s32 bmp280_compensate_temp(struct bmp280_data *data,
|
|
s32 adc_temp)
|
|
{
|
|
int ret;
|
|
s32 var1, var2;
|
|
__le16 buf[BMP280_COMP_TEMP_REG_COUNT / 2];
|
|
|
|
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
|
|
buf, BMP280_COMP_TEMP_REG_COUNT);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"failed to read temperature calibration parameters\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The double casts are necessary because le16_to_cpu returns an
|
|
* unsigned 16-bit value. Casting that value directly to a
|
|
* signed 32-bit will not do proper sign extension.
|
|
*
|
|
* Conversely, T1 and P1 are unsigned values, so they can be
|
|
* cast straight to the larger type.
|
|
*/
|
|
var1 = (((adc_temp >> 3) - ((s32)le16_to_cpu(buf[T1]) << 1)) *
|
|
((s32)(s16)le16_to_cpu(buf[T2]))) >> 11;
|
|
var2 = (((((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1]))) *
|
|
((adc_temp >> 4) - ((s32)le16_to_cpu(buf[T1])))) >> 12) *
|
|
((s32)(s16)le16_to_cpu(buf[T3]))) >> 14;
|
|
data->t_fine = var1 + var2;
|
|
|
|
return (data->t_fine * 5 + 128) >> 8;
|
|
}
|
|
|
|
/*
|
|
* Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24
|
|
* integer bits and 8 fractional bits). Output value of "24674867"
|
|
* represents 24674867/256 = 96386.2 Pa = 963.862 hPa
|
|
*
|
|
* Taken from datasheet, Section 3.11.3, "Compensation formula".
|
|
*/
|
|
static u32 bmp280_compensate_press(struct bmp280_data *data,
|
|
s32 adc_press)
|
|
{
|
|
int ret;
|
|
s64 var1, var2, p;
|
|
__le16 buf[BMP280_COMP_PRESS_REG_COUNT / 2];
|
|
|
|
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_PRESS_START,
|
|
buf, BMP280_COMP_PRESS_REG_COUNT);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"failed to read pressure calibration parameters\n");
|
|
return ret;
|
|
}
|
|
|
|
var1 = ((s64)data->t_fine) - 128000;
|
|
var2 = var1 * var1 * (s64)(s16)le16_to_cpu(buf[P6]);
|
|
var2 += (var1 * (s64)(s16)le16_to_cpu(buf[P5])) << 17;
|
|
var2 += ((s64)(s16)le16_to_cpu(buf[P4])) << 35;
|
|
var1 = ((var1 * var1 * (s64)(s16)le16_to_cpu(buf[P3])) >> 8) +
|
|
((var1 * (s64)(s16)le16_to_cpu(buf[P2])) << 12);
|
|
var1 = ((((s64)1) << 47) + var1) * ((s64)le16_to_cpu(buf[P1])) >> 33;
|
|
|
|
if (var1 == 0)
|
|
return 0;
|
|
|
|
p = ((((s64)1048576 - adc_press) << 31) - var2) * 3125;
|
|
p = div64_s64(p, var1);
|
|
var1 = (((s64)(s16)le16_to_cpu(buf[P9])) * (p >> 13) * (p >> 13)) >> 25;
|
|
var2 = (((s64)(s16)le16_to_cpu(buf[P8])) * p) >> 19;
|
|
p = ((p + var1 + var2) >> 8) + (((s64)(s16)le16_to_cpu(buf[P7])) << 4);
|
|
|
|
return (u32)p;
|
|
}
|
|
|
|
static int bmp280_read_temp(struct bmp280_data *data,
|
|
int *val)
|
|
{
|
|
int ret;
|
|
__be32 tmp = 0;
|
|
s32 adc_temp, comp_temp;
|
|
|
|
ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
|
|
(u8 *) &tmp, 3);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "failed to read temperature\n");
|
|
return ret;
|
|
}
|
|
|
|
adc_temp = be32_to_cpu(tmp) >> 12;
|
|
comp_temp = bmp280_compensate_temp(data, adc_temp);
|
|
|
|
/*
|
|
* val might be NULL if we're called by the read_press routine,
|
|
* who only cares about the carry over t_fine value.
|
|
*/
|
|
if (val) {
|
|
*val = comp_temp * 10;
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmp280_read_press(struct bmp280_data *data,
|
|
int *val, int *val2)
|
|
{
|
|
int ret;
|
|
__be32 tmp = 0;
|
|
s32 adc_press;
|
|
u32 comp_press;
|
|
|
|
/* Read and compensate temperature so we get a reading of t_fine. */
|
|
ret = bmp280_read_temp(data, NULL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
|
|
(u8 *) &tmp, 3);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev, "failed to read pressure\n");
|
|
return ret;
|
|
}
|
|
|
|
adc_press = be32_to_cpu(tmp) >> 12;
|
|
comp_press = bmp280_compensate_press(data, adc_press);
|
|
|
|
*val = comp_press;
|
|
*val2 = 256000;
|
|
|
|
return IIO_VAL_FRACTIONAL;
|
|
}
|
|
|
|
static int bmp280_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
int ret;
|
|
struct bmp280_data *data = iio_priv(indio_dev);
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
switch (chan->type) {
|
|
case IIO_PRESSURE:
|
|
ret = bmp280_read_press(data, val, val2);
|
|
break;
|
|
case IIO_TEMP:
|
|
ret = bmp280_read_temp(data, val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info bmp280_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = &bmp280_read_raw,
|
|
};
|
|
|
|
static int bmp280_chip_init(struct bmp280_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_MEAS,
|
|
BMP280_OSRS_TEMP_MASK |
|
|
BMP280_OSRS_PRESS_MASK |
|
|
BMP280_MODE_MASK,
|
|
BMP280_OSRS_TEMP_2X |
|
|
BMP280_OSRS_PRESS_16X |
|
|
BMP280_MODE_NORMAL);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"failed to write ctrl_meas register\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(data->regmap, BMP280_REG_CONFIG,
|
|
BMP280_FILTER_MASK,
|
|
BMP280_FILTER_4X);
|
|
if (ret < 0) {
|
|
dev_err(&data->client->dev,
|
|
"failed to write config register\n");
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bmp280_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
int ret;
|
|
struct iio_dev *indio_dev;
|
|
struct bmp280_data *data;
|
|
unsigned int chip_id;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
mutex_init(&data->lock);
|
|
data->client = client;
|
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
indio_dev->name = id->name;
|
|
indio_dev->channels = bmp280_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(bmp280_channels);
|
|
indio_dev->info = &bmp280_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &bmp280_regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
dev_err(&client->dev, "failed to allocate register map\n");
|
|
return PTR_ERR(data->regmap);
|
|
}
|
|
|
|
ret = regmap_read(data->regmap, BMP280_REG_ID, &chip_id);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (chip_id != BMP280_CHIP_ID) {
|
|
dev_err(&client->dev, "bad chip id. expected %x got %x\n",
|
|
BMP280_CHIP_ID, chip_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = bmp280_chip_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct acpi_device_id bmp280_acpi_match[] = {
|
|
{"BMP0280", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, bmp280_acpi_match);
|
|
|
|
static const struct i2c_device_id bmp280_id[] = {
|
|
{"bmp280", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, bmp280_id);
|
|
|
|
static struct i2c_driver bmp280_driver = {
|
|
.driver = {
|
|
.name = "bmp280",
|
|
.acpi_match_table = ACPI_PTR(bmp280_acpi_match),
|
|
},
|
|
.probe = bmp280_probe,
|
|
.id_table = bmp280_id,
|
|
};
|
|
module_i2c_driver(bmp280_driver);
|
|
|
|
MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
|
|
MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP280 pressure and temperature sensor");
|
|
MODULE_LICENSE("GPL v2");
|