mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 18:54:09 +08:00
81777ff9dd
This patch fixes the following DTC warnings: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
309 lines
7.5 KiB
Plaintext
309 lines
7.5 KiB
Plaintext
/*
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include "omap34xx.dtsi"
|
|
#include "omap-gpmc-smsc911x.dtsi"
|
|
|
|
/ {
|
|
model = "TI OMAP3430 LDP (Zoom1 Labrador)";
|
|
compatible = "ti,omap3-ldp", "ti,omap3";
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x8000000>; /* 128 MB */
|
|
};
|
|
|
|
cpus {
|
|
cpu@0 {
|
|
cpu0-supply = <&vcc>;
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_key_pins>;
|
|
|
|
key_enter {
|
|
label = "enter";
|
|
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
|
|
linux,code = <KEY_ENTER>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f1 {
|
|
label = "f1";
|
|
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
|
|
linux,code = <KEY_F1>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f2 {
|
|
label = "f2";
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
|
|
linux,code = <KEY_F2>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f3 {
|
|
label = "f3";
|
|
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
|
|
linux,code = <KEY_F3>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_f4 {
|
|
label = "f4";
|
|
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
|
|
linux,code = <KEY_F4>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_left {
|
|
label = "left";
|
|
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
|
|
linux,code = <KEY_LEFT>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_right {
|
|
label = "right";
|
|
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
|
|
linux,code = <KEY_RIGHT>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_up {
|
|
label = "up";
|
|
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
|
|
linux,code = <KEY_UP>;
|
|
wakeup-source;
|
|
};
|
|
|
|
key_down {
|
|
label = "down";
|
|
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
|
|
linux,code = <KEY_DOWN>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gpmc {
|
|
ranges = <0 0 0x30000000 0x1000000>, /* CS0 space, 16MB */
|
|
<1 0 0x08000000 0x1000000>; /* CS1 space, 16MB */
|
|
|
|
nand@0,0 {
|
|
compatible = "ti,omap2-nand";
|
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
|
interrupt-parent = <&gpmc>;
|
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
|
linux,mtd-name= "micron,nand";
|
|
nand-bus-width = <16>;
|
|
gpmc,device-width = <2>;
|
|
ti,nand-ecc-opt = "bch8";
|
|
|
|
gpmc,sync-clk-ps = <0>;
|
|
gpmc,cs-on-ns = <0>;
|
|
gpmc,cs-rd-off-ns = <44>;
|
|
gpmc,cs-wr-off-ns = <44>;
|
|
gpmc,adv-on-ns = <6>;
|
|
gpmc,adv-rd-off-ns = <34>;
|
|
gpmc,adv-wr-off-ns = <44>;
|
|
gpmc,we-off-ns = <40>;
|
|
gpmc,oe-off-ns = <54>;
|
|
gpmc,access-ns = <64>;
|
|
gpmc,rd-cycle-ns = <82>;
|
|
gpmc,wr-cycle-ns = <82>;
|
|
gpmc,wr-access-ns = <40>;
|
|
gpmc,wr-data-mux-bus-ns = <0>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "X-Loader";
|
|
reg = <0 0x80000>;
|
|
};
|
|
partition@80000 {
|
|
label = "U-Boot";
|
|
reg = <0x80000 0x140000>;
|
|
};
|
|
partition@1c0000 {
|
|
label = "Environment";
|
|
reg = <0x1c0000 0x40000>;
|
|
};
|
|
partition@200000 {
|
|
label = "Kernel";
|
|
reg = <0x200000 0x1e00000>;
|
|
};
|
|
partition@2000000 {
|
|
label = "Filesystem";
|
|
reg = <0x2000000 0x6000000>;
|
|
};
|
|
};
|
|
|
|
ethernet@gpmc {
|
|
interrupt-parent = <&gpio5>;
|
|
interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
|
|
reg = <1 0 0xff>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
clock-frequency = <2600000>;
|
|
|
|
twl: twl@48 {
|
|
reg = <0x48>;
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
interrupt-parent = <&intc>;
|
|
|
|
twl_power: power {
|
|
compatible = "ti,twl4030-power-idle";
|
|
ti,use_poweroff;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "twl4030.dtsi"
|
|
#include "twl4030_omap3.dtsi"
|
|
#include "omap3-panel-sharp-ls037v7dw01.dtsi"
|
|
|
|
&backlight0 {
|
|
gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
&i2c3 {
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
/* tps61130rsa enabled by twl4030 regen */
|
|
&lcd_3v3 {
|
|
regulator-always-on;
|
|
};
|
|
|
|
&lcd0 {
|
|
enable-gpios = <&twl_gpio 15 GPIO_ACTIVE_HIGH>; /* lcd INI */
|
|
reset-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; /* gpio55, lcd RESB */
|
|
mode-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio56, lcd MO */
|
|
};
|
|
|
|
&mcspi1 {
|
|
tsc2046@0 {
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <22 0>; /* gpio54 */
|
|
pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
/* See 35xx errata 2.1.1.128 in SPRZ278F */
|
|
compatible = "ti,omap3-pre-es3-hsmmc";
|
|
vmmc-supply = <&vmmc1>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
};
|
|
|
|
&mmc2 {
|
|
status="disabled";
|
|
};
|
|
|
|
&mmc3 {
|
|
status="disabled";
|
|
};
|
|
|
|
&omap3_pmx_core {
|
|
gpio_key_pins: pinmux_gpio_key_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* cam_d2.gpio_101 */
|
|
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* cam_d3.gpio_102 */
|
|
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* cam_d4.gpio_103 */
|
|
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* cam_d5.gpio_104 */
|
|
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* cam_d6.gpio_105 */
|
|
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* cam_d7.gpio_106 */
|
|
OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* cam_d8.gpio_107 */
|
|
OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* cam_d9.gpio_108 */
|
|
OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* cam_d10.gpio_109 */
|
|
>;
|
|
};
|
|
|
|
musb_pins: pinmux_musb_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x21a2, PIN_INPUT | MUX_MODE0) /* hsusb0_clk.hsusb0_clk */
|
|
OMAP3_CORE1_IOPAD(0x21aa, PIN_INPUT | MUX_MODE0) /* hsusb0_data0.hsusb0_data0 */
|
|
OMAP3_CORE1_IOPAD(0x21ac, PIN_INPUT | MUX_MODE0) /* hsusb0_data1.hsusb0_data1 */
|
|
OMAP3_CORE1_IOPAD(0x21ae, PIN_INPUT | MUX_MODE0) /* hsusb0_data2.hsusb0_data2 */
|
|
OMAP3_CORE1_IOPAD(0x21b0, PIN_INPUT | MUX_MODE0) /* hsusb0_data3.hsusb0_data3 */
|
|
OMAP3_CORE1_IOPAD(0x21b2, PIN_INPUT | MUX_MODE0) /* hsusb0_data4.hsusb0_data4 */
|
|
OMAP3_CORE1_IOPAD(0x21b4, PIN_INPUT | MUX_MODE0) /* hsusb0_data5.hsusb0_data5 */
|
|
OMAP3_CORE1_IOPAD(0x21b6, PIN_INPUT | MUX_MODE0) /* hsusb0_data6.hsusb0_data6 */
|
|
OMAP3_CORE1_IOPAD(0x21b8, PIN_INPUT | MUX_MODE0) /* hsusb0_data7.hsusb0_data7 */
|
|
OMAP3_CORE1_IOPAD(0x21a6, PIN_INPUT | MUX_MODE0) /* hsusb0_dir.hsusb0_dir */
|
|
OMAP3_CORE1_IOPAD(0x21a8, PIN_INPUT | MUX_MODE0) /* hsusb0_nxt.hsusb0_nxt */
|
|
OMAP3_CORE1_IOPAD(0x21a4, PIN_OUTPUT | MUX_MODE0) /* hsusb0_stp.hsusb0_stp */
|
|
>;
|
|
};
|
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
|
|
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
|
|
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
|
|
OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
|
|
OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
|
|
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&twl_keypad {
|
|
linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
|
|
MATRIX_KEY(0, 1, KEY_2)
|
|
MATRIX_KEY(0, 2, KEY_3)
|
|
MATRIX_KEY(1, 0, KEY_4)
|
|
MATRIX_KEY(1, 1, KEY_5)
|
|
MATRIX_KEY(1, 2, KEY_6)
|
|
MATRIX_KEY(1, 3, KEY_F5)
|
|
MATRIX_KEY(2, 0, KEY_7)
|
|
MATRIX_KEY(2, 1, KEY_8)
|
|
MATRIX_KEY(2, 2, KEY_9)
|
|
MATRIX_KEY(2, 3, KEY_F6)
|
|
MATRIX_KEY(3, 0, KEY_F7)
|
|
MATRIX_KEY(3, 1, KEY_0)
|
|
MATRIX_KEY(3, 2, KEY_F8)
|
|
MATRIX_KEY(5, 4, KEY_RESERVED)
|
|
MATRIX_KEY(4, 4, KEY_VOLUMEUP)
|
|
MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
|
|
};
|
|
|
|
&uart3 {
|
|
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
|
};
|
|
|
|
&usb_otg_hs {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&musb_pins>;
|
|
interface-type = <0>;
|
|
usb-phy = <&usb2_phy>;
|
|
mode = <3>;
|
|
power = <50>;
|
|
};
|
|
|
|
&vaux1 {
|
|
/* Needed for ads7846 */
|
|
regulator-name = "vcc";
|
|
};
|