mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-27 21:14:44 +08:00
93d1724711
Introduce support for Broadcom Serial Controller (BSC) I2C bus found in the Kona family of Mobile SoCs. FIFO hardware is utilized but only standard mode (100kHz), fast mode (400kHz), fast mode plus (1MHz), and I2C high-speed (3.4 MHz) bus speeds are supported. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> [wsa: fixed Kconfig sorting, squashed broken out patches into one] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
995 lines
29 KiB
Plaintext
995 lines
29 KiB
Plaintext
#
|
|
# Sensor device configuration
|
|
#
|
|
|
|
menu "I2C Hardware Bus support"
|
|
depends on HAS_IOMEM
|
|
|
|
comment "PC SMBus host controller drivers"
|
|
depends on PCI
|
|
|
|
config I2C_ALI1535
|
|
tristate "ALI 1535"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SMB
|
|
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
|
Power Management Unit (PMU).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali1535.
|
|
|
|
config I2C_ALI1563
|
|
tristate "ALI 1563"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SMB
|
|
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
|
Power Management Unit (PMU).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali1563.
|
|
|
|
config I2C_ALI15X3
|
|
tristate "ALI 15x3"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ali15x3.
|
|
|
|
config I2C_AMD756
|
|
tristate "AMD 756/766/768/8111 and nVidia nForce"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the AMD
|
|
756/766/768 mainboard I2C interfaces. The driver also includes
|
|
support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
|
|
the nVidia nForce I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd756.
|
|
|
|
config I2C_AMD756_S4882
|
|
tristate "SMBus multiplexing on the Tyan S4882"
|
|
depends on I2C_AMD756 && X86
|
|
help
|
|
Enabling this option will add specific SMBus support for the Tyan
|
|
S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
|
over 8 different channels, where the various memory module EEPROMs
|
|
and temperature sensors live. Saying yes here will give you access
|
|
to these in addition to the trunk.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd756-s4882.
|
|
|
|
config I2C_AMD8111
|
|
tristate "AMD 8111"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-amd8111.
|
|
|
|
config I2C_I801
|
|
tristate "Intel 82801 (ICH/PCH)"
|
|
depends on PCI
|
|
select CHECK_SIGNATURE if X86 && DMI
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
801 family of mainboard I2C interfaces. Specifically, the following
|
|
versions of the chipset are supported:
|
|
82801AA
|
|
82801AB
|
|
82801BA
|
|
82801CA/CAM
|
|
82801DB
|
|
82801EB/ER (ICH5/ICH5R)
|
|
6300ESB
|
|
ICH6
|
|
ICH7
|
|
ESB2
|
|
ICH8
|
|
ICH9
|
|
EP80579 (Tolapai)
|
|
ICH10
|
|
5/3400 Series (PCH)
|
|
6 Series (PCH)
|
|
Patsburg (PCH)
|
|
DH89xxCC (PCH)
|
|
Panther Point (PCH)
|
|
Lynx Point (PCH)
|
|
Lynx Point-LP (PCH)
|
|
Avoton (SOC)
|
|
Wellsburg (PCH)
|
|
Coleto Creek (PCH)
|
|
Wildcat Point-LP (PCH)
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-i801.
|
|
|
|
config I2C_ISCH
|
|
tristate "Intel SCH SMBus 1.0"
|
|
depends on PCI
|
|
select LPC_SCH
|
|
help
|
|
Say Y here if you want to use SMBus controller on the Intel SCH
|
|
based systems.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-isch.
|
|
|
|
config I2C_ISMT
|
|
tristate "Intel iSMT SMBus Controller"
|
|
depends on PCI && X86
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
iSMT SMBus host controller interface.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called i2c-ismt.
|
|
|
|
config I2C_PIIX4
|
|
tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Intel
|
|
PIIX4 family of mainboard I2C interfaces. Specifically, the following
|
|
versions of the chipset are supported (note that Serverworks is part
|
|
of Broadcom):
|
|
Intel PIIX4
|
|
Intel 440MX
|
|
ATI IXP200
|
|
ATI IXP300
|
|
ATI IXP400
|
|
ATI SB600
|
|
ATI SB700/SP5100
|
|
ATI SB800
|
|
AMD Hudson-2
|
|
AMD CZ
|
|
Serverworks OSB4
|
|
Serverworks CSB5
|
|
Serverworks CSB6
|
|
Serverworks HT-1000
|
|
Serverworks HT-1100
|
|
SMSC Victory66
|
|
|
|
Some AMD chipsets contain two PIIX4-compatible SMBus
|
|
controllers. This driver will attempt to use both controllers
|
|
on the SB700/SP5100, if they have been initialized by the BIOS.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-piix4.
|
|
|
|
config I2C_NFORCE2
|
|
tristate "Nvidia nForce2, nForce3 and nForce4"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the Nvidia
|
|
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-nforce2.
|
|
|
|
config I2C_NFORCE2_S4985
|
|
tristate "SMBus multiplexing on the Tyan S4985"
|
|
depends on I2C_NFORCE2 && X86
|
|
help
|
|
Enabling this option will add specific SMBus support for the Tyan
|
|
S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
|
over 4 different channels, where the various memory module EEPROMs
|
|
live. Saying yes here will give you access to these in addition
|
|
to the trunk.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-nforce2-s4985.
|
|
|
|
config I2C_SIS5595
|
|
tristate "SiS 5595"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
SiS5595 SMBus (a subset of I2C) interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis5595.
|
|
|
|
config I2C_SIS630
|
|
tristate "SiS 630/730/964"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis630.
|
|
|
|
config I2C_SIS96X
|
|
tristate "SiS 96x"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the SiS
|
|
96x SMBus (a subset of I2C) interfaces. Specifically, the following
|
|
chipsets are supported:
|
|
645/961
|
|
645DX/961
|
|
645DX/962
|
|
648/961
|
|
650/961
|
|
735
|
|
745
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sis96x.
|
|
|
|
config I2C_VIA
|
|
tristate "VIA VT82C586B"
|
|
depends on PCI
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for the VIA
|
|
82C586B I2C interface
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-via.
|
|
|
|
config I2C_VIAPRO
|
|
tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
|
|
depends on PCI
|
|
help
|
|
If you say yes to this option, support will be included for the VIA
|
|
VT82C596 and later SMBus interface. Specifically, the following
|
|
chipsets are supported:
|
|
VT82C596A/B
|
|
VT82C686A/B
|
|
VT8231
|
|
VT8233/A
|
|
VT8235
|
|
VT8237R/A/S
|
|
VT8251
|
|
CX700
|
|
VX800/VX820
|
|
VX855/VX875
|
|
VX900
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-viapro.
|
|
|
|
if ACPI
|
|
|
|
comment "ACPI drivers"
|
|
|
|
config I2C_SCMI
|
|
tristate "SMBus Control Method Interface"
|
|
help
|
|
This driver supports the SMBus Control Method Interface. It needs the
|
|
BIOS to declare ACPI control methods as described in the SMBus Control
|
|
Method Interface specification.
|
|
|
|
To compile this driver as a module, choose M here:
|
|
the module will be called i2c-scmi.
|
|
|
|
endif # ACPI
|
|
|
|
comment "Mac SMBus host controller drivers"
|
|
depends on PPC_CHRP || PPC_PMAC
|
|
|
|
config I2C_HYDRA
|
|
tristate "CHRP Apple Hydra Mac I/O I2C interface"
|
|
depends on PCI && PPC_CHRP
|
|
select I2C_ALGOBIT
|
|
help
|
|
This supports the use of the I2C interface in the Apple Hydra Mac
|
|
I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
|
|
have such a machine.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-hydra.
|
|
|
|
config I2C_POWERMAC
|
|
tristate "Powermac I2C interface"
|
|
depends on PPC_PMAC
|
|
default y
|
|
help
|
|
This exposes the various PowerMac i2c interfaces to the linux i2c
|
|
layer and to userland. It is used by various drivers on the PowerMac
|
|
platform, and should generally be enabled.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-powermac.
|
|
|
|
comment "I2C system bus drivers (mostly embedded / system-on-chip)"
|
|
|
|
config I2C_AT91
|
|
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
|
|
depends on ARCH_AT91
|
|
help
|
|
This supports the use of the I2C interface on Atmel AT91
|
|
processors.
|
|
|
|
A serious problem is that there is no documented way to issue
|
|
repeated START conditions for more than two messages, as needed
|
|
to support combined I2C messages. Use the i2c-gpio driver
|
|
unless your system can cope with this limitation.
|
|
|
|
Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices
|
|
don't have clock stretching in transmission mode. For that reason,
|
|
you can encounter underrun issues causing premature stop sendings if
|
|
the latency to fill the transmission register is too long. If you
|
|
are facing this situation, use the i2c-gpio driver.
|
|
|
|
config I2C_AU1550
|
|
tristate "Au1550/Au1200/Au1300 SMBus interface"
|
|
depends on MIPS_ALCHEMY
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Au1550/Au1200/Au1300 SMBus interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-au1550.
|
|
|
|
config I2C_BCM2835
|
|
tristate "Broadcom BCM2835 I2C controller"
|
|
depends on ARCH_BCM2835
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
BCM2835 I2C controller.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-bcm2835.
|
|
|
|
config I2C_BCM_KONA
|
|
tristate "BCM Kona I2C adapter"
|
|
depends on ARCH_BCM_MOBILE
|
|
default y
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C interface on the Broadcom Kona family of processors.
|
|
|
|
If you do not need KONA I2C inteface, say N.
|
|
|
|
config I2C_BLACKFIN_TWI
|
|
tristate "Blackfin TWI I2C support"
|
|
depends on BLACKFIN
|
|
depends on !BF561 && !BF531 && !BF532 && !BF533
|
|
help
|
|
This is the I2C bus driver for Blackfin on-chip TWI interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-bfin-twi.
|
|
|
|
config I2C_BLACKFIN_TWI_CLK_KHZ
|
|
int "Blackfin TWI I2C clock (kHz)"
|
|
depends on I2C_BLACKFIN_TWI
|
|
range 21 400
|
|
default 50
|
|
help
|
|
The unit of the TWI clock is kHz.
|
|
|
|
config I2C_CBUS_GPIO
|
|
tristate "CBUS I2C driver"
|
|
depends on GPIOLIB
|
|
help
|
|
Support for CBUS access using I2C API. Mostly relevant for Nokia
|
|
Internet Tablets (770, N800 and N810).
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-cbus-gpio.
|
|
|
|
config I2C_CPM
|
|
tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
|
|
depends on (CPM1 || CPM2) && OF_I2C
|
|
help
|
|
This supports the use of the I2C interface on Freescale
|
|
processors with CPM1 or CPM2.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-cpm.
|
|
|
|
config I2C_DAVINCI
|
|
tristate "DaVinci I2C driver"
|
|
depends on ARCH_DAVINCI || ARCH_KEYSTONE
|
|
help
|
|
Support for TI DaVinci I2C controller driver.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-davinci.
|
|
|
|
Please note that this driver might be needed to bring up other
|
|
devices such as DaVinci NIC.
|
|
For details please see http://www.ti.com/davinci
|
|
|
|
config I2C_DESIGNWARE_CORE
|
|
tristate
|
|
|
|
config I2C_DESIGNWARE_PLATFORM
|
|
tristate "Synopsys DesignWare Platform"
|
|
depends on HAVE_CLK
|
|
select I2C_DESIGNWARE_CORE
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Synopsys DesignWare I2C adapter. Only master mode is supported.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-designware-platform.
|
|
|
|
config I2C_DESIGNWARE_PCI
|
|
tristate "Synopsys DesignWare PCI"
|
|
depends on PCI
|
|
select I2C_DESIGNWARE_CORE
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Synopsys DesignWare I2C adapter. Only master mode is supported.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-designware-pci.
|
|
|
|
config I2C_EG20T
|
|
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
|
|
depends on PCI
|
|
help
|
|
This driver is for PCH(Platform controller Hub) I2C of EG20T which
|
|
is an IOH(Input/Output Hub) for x86 embedded processor.
|
|
This driver can access PCH I2C bus device.
|
|
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
|
Output Hub), ML7213, ML7223 and ML7831.
|
|
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
|
|
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
|
|
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
|
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
|
|
|
config I2C_EXYNOS5
|
|
tristate "Exynos5 high-speed I2C driver"
|
|
depends on ARCH_EXYNOS5 && OF
|
|
help
|
|
Say Y here to include support for high-speed I2C controller in the
|
|
Exynos5 based Samsung SoCs.
|
|
|
|
config I2C_GPIO
|
|
tristate "GPIO-based bitbanging I2C"
|
|
depends on GPIOLIB
|
|
select I2C_ALGOBIT
|
|
help
|
|
This is a very simple bitbanging I2C driver utilizing the
|
|
arch-neutral GPIO API to control the SCL and SDA lines.
|
|
|
|
config I2C_HIGHLANDER
|
|
tristate "Highlander FPGA SMBus interface"
|
|
depends on SH_HIGHLANDER
|
|
help
|
|
If you say yes to this option, support will be included for
|
|
the SMBus interface located in the FPGA on various Highlander
|
|
boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
|
|
FPGAs. This is wholly unrelated to the SoC I2C.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-highlander.
|
|
|
|
config I2C_IBM_IIC
|
|
tristate "IBM PPC 4xx on-chip I2C interface"
|
|
depends on 4xx
|
|
help
|
|
Say Y here if you want to use IIC peripheral found on
|
|
embedded IBM PPC 4xx based systems.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ibm_iic.
|
|
|
|
config I2C_IMX
|
|
tristate "IMX I2C interface"
|
|
depends on ARCH_MXC
|
|
help
|
|
Say Y here if you want to use the IIC bus controller on
|
|
the Freescale i.MX/MXC processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-imx.
|
|
|
|
config I2C_IOP3XX
|
|
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
|
|
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
|
|
help
|
|
Say Y here if you want to use the IIC bus controller on
|
|
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-iop3xx.
|
|
|
|
config I2C_KEMPLD
|
|
tristate "Kontron COM I2C Controller"
|
|
depends on MFD_KEMPLD
|
|
help
|
|
This enables support for the I2C bus interface on some Kontron ETX
|
|
and COMexpress (ETXexpress) modules.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-kempld.
|
|
|
|
config I2C_MPC
|
|
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
|
|
depends on PPC
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
|
|
MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mpc.
|
|
|
|
config I2C_MV64XXX
|
|
tristate "Marvell mv64xxx I2C Controller"
|
|
depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the Marvell 64xxx line of host bridges.
|
|
This driver is also used for Allwinner SoCs I2C controllers.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mv64xxx.
|
|
|
|
config I2C_MXS
|
|
tristate "Freescale i.MX28 I2C interface"
|
|
depends on SOC_IMX28
|
|
select STMP_DEVICE
|
|
help
|
|
Say Y here if you want to use the I2C bus controller on
|
|
the Freescale i.MX28 processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-mxs.
|
|
|
|
config I2C_NOMADIK
|
|
tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
|
|
depends on ARM_AMBA
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
|
|
as well as the STA2X11 PCIe I/O HUB.
|
|
|
|
config I2C_NUC900
|
|
tristate "NUC900 I2C Driver"
|
|
depends on ARCH_W90X900
|
|
help
|
|
Say Y here to include support for I2C controller in the
|
|
Winbond/Nuvoton NUC900 based System-on-Chip devices.
|
|
|
|
config I2C_OCORES
|
|
tristate "OpenCores I2C Controller"
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
OpenCores I2C controller. For details see
|
|
http://www.opencores.org/projects.cgi/web/i2c/overview
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-ocores.
|
|
|
|
config I2C_OMAP
|
|
tristate "OMAP I2C adapter"
|
|
depends on ARCH_OMAP
|
|
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C interface on the Texas Instruments OMAP1/2 family of processors.
|
|
Like OMAP1510/1610/1710/5912 and OMAP242x.
|
|
For details see http://www.ti.com/omap.
|
|
|
|
config I2C_PASEMI
|
|
tristate "PA Semi SMBus interface"
|
|
depends on PPC_PASEMI && PCI
|
|
help
|
|
Supports the PA Semi PWRficient on-chip SMBus interfaces.
|
|
|
|
config I2C_PCA_PLATFORM
|
|
tristate "PCA9564/PCA9665 as platform device"
|
|
select I2C_ALGOPCA
|
|
default n
|
|
help
|
|
This driver supports a memory mapped Philips PCA9564/PCA9665
|
|
parallel bus to I2C bus controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pca-platform.
|
|
|
|
config I2C_PMCMSP
|
|
tristate "PMC MSP I2C TWI Controller"
|
|
depends on PMC_MSP
|
|
help
|
|
This driver supports the PMC TWI controller on MSP devices.
|
|
|
|
This driver can also be built as module. If so, the module
|
|
will be called i2c-pmcmsp.
|
|
|
|
config I2C_PNX
|
|
tristate "I2C bus support for Philips PNX and NXP LPC targets"
|
|
depends on ARCH_LPC32XX
|
|
help
|
|
This driver supports the Philips IP3204 I2C IP block master and/or
|
|
slave controller
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pnx.
|
|
|
|
config I2C_PUV3
|
|
tristate "PKUnity v3 I2C bus support"
|
|
depends on UNICORE32 && ARCH_PUV3
|
|
select I2C_ALGOBIT
|
|
help
|
|
This driver supports the I2C IP inside the PKUnity-v3 SoC.
|
|
This I2C bus controller is under AMBA/AXI bus.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-puv3.
|
|
|
|
config I2C_PXA
|
|
tristate "Intel PXA2XX I2C adapter"
|
|
depends on ARCH_PXA || ARCH_MMP || (X86_32 && PCI && OF)
|
|
help
|
|
If you have devices in the PXA I2C bus, say yes to this option.
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pxa.
|
|
|
|
config I2C_PXA_PCI
|
|
def_bool I2C_PXA && X86_32 && PCI && OF
|
|
|
|
config I2C_PXA_SLAVE
|
|
bool "Intel PXA2XX I2C Slave comms support"
|
|
depends on I2C_PXA && !X86_32
|
|
help
|
|
Support I2C slave mode communications on the PXA I2C bus. This
|
|
is necessary for systems where the PXA may be a target on the
|
|
I2C bus.
|
|
|
|
config HAVE_S3C2410_I2C
|
|
bool
|
|
help
|
|
This will include I2C support for Samsung SoCs. If you want to
|
|
include I2C support for any machine, kindly select this in the
|
|
respective Kconfig file.
|
|
|
|
config I2C_S3C2410
|
|
tristate "S3C2410 I2C Driver"
|
|
depends on HAVE_S3C2410_I2C
|
|
help
|
|
Say Y here to include support for I2C controller in the
|
|
Samsung SoCs.
|
|
|
|
config I2C_S6000
|
|
tristate "S6000 I2C support"
|
|
depends on XTENSA_VARIANT_S6000
|
|
help
|
|
This driver supports the on chip I2C device on the
|
|
S6000 xtensa processor family.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called i2c-s6000.
|
|
|
|
config I2C_SH7760
|
|
tristate "Renesas SH7760 I2C Controller"
|
|
depends on CPU_SUBTYPE_SH7760
|
|
help
|
|
This driver supports the 2 I2C interfaces on the Renesas SH7760.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sh7760.
|
|
|
|
config I2C_SH_MOBILE
|
|
tristate "SuperH Mobile I2C Controller"
|
|
depends on SUPERH || ARM || COMPILE_TEST
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
built-in I2C interface on the Renesas SH-Mobile processor.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sh_mobile.
|
|
|
|
config I2C_SIMTEC
|
|
tristate "Simtec Generic I2C interface"
|
|
select I2C_ALGOBIT
|
|
help
|
|
If you say yes to this option, support will be included for
|
|
the Simtec Generic I2C interface. This driver is for the
|
|
simple I2C bus used on newer Simtec products for general
|
|
I2C, such as DDC on the Simtec BBD2016A.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-simtec.
|
|
|
|
config I2C_SIRF
|
|
tristate "CSR SiRFprimaII I2C interface"
|
|
depends on ARCH_SIRF
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
CSR SiRFprimaII I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-sirf.
|
|
|
|
config I2C_ST
|
|
tristate "STMicroelectronics SSC I2C support"
|
|
depends on ARCH_STI
|
|
help
|
|
Enable this option to add support for STMicroelectronics SoCs
|
|
hardware SSC (Synchronous Serial Controller) as an I2C controller.
|
|
|
|
This driver can also be built as module. If so, the module
|
|
will be called i2c-st.
|
|
|
|
config I2C_STU300
|
|
tristate "ST Microelectronics DDC I2C interface"
|
|
depends on MACH_U300
|
|
default y if MACH_U300
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C interface from ST Microelectronics simply called "DDC I2C"
|
|
supporting both I2C and DDC, used in e.g. the U300 series
|
|
mobile platforms.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-stu300.
|
|
|
|
config I2C_TEGRA
|
|
tristate "NVIDIA Tegra internal I2C controller"
|
|
depends on ARCH_TEGRA
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
I2C controller embedded in NVIDIA Tegra SOCs
|
|
|
|
config I2C_VERSATILE
|
|
tristate "ARM Versatile/Realview I2C bus support"
|
|
depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
|
|
select I2C_ALGOBIT
|
|
help
|
|
Say yes if you want to support the I2C serial bus on ARMs Versatile
|
|
range of platforms.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-versatile.
|
|
|
|
config I2C_WMT
|
|
tristate "Wondermedia WM8xxx SoC I2C bus support"
|
|
depends on ARCH_VT8500
|
|
help
|
|
Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
|
|
SoCs.
|
|
|
|
This driver can also be built as a module. If so, the module will be
|
|
called i2c-wmt.
|
|
|
|
config I2C_OCTEON
|
|
tristate "Cavium OCTEON I2C bus support"
|
|
depends on CAVIUM_OCTEON_SOC
|
|
help
|
|
Say yes if you want to support the I2C serial bus on Cavium
|
|
OCTEON SOC.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-octeon.
|
|
|
|
config I2C_XILINX
|
|
tristate "Xilinx I2C Controller"
|
|
depends on HAS_IOMEM
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
Xilinx I2C controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called xilinx_i2c.
|
|
|
|
config I2C_XLR
|
|
tristate "XLR I2C support"
|
|
depends on CPU_XLR
|
|
help
|
|
This driver enables support for the on-chip I2C interface of
|
|
the Netlogic XLR/XLS MIPS processors.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-xlr.
|
|
|
|
config I2C_RCAR
|
|
tristate "Renesas R-Car I2C Controller"
|
|
depends on ARM || COMPILE_TEST
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
R-Car I2C controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-rcar.
|
|
|
|
comment "External I2C/SMBus adapter drivers"
|
|
|
|
config I2C_DIOLAN_U2C
|
|
tristate "Diolan U2C-12 USB adapter"
|
|
depends on USB
|
|
help
|
|
If you say yes to this option, support will be included for Diolan
|
|
U2C-12, a USB to I2C interface.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-diolan-u2c.
|
|
|
|
config I2C_PARPORT
|
|
tristate "Parallel port adapter"
|
|
depends on PARPORT
|
|
select I2C_ALGOBIT
|
|
select I2C_SMBUS
|
|
help
|
|
This supports parallel port I2C adapters such as the ones made by
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
|
Basically any adapter using the parallel port as an I2C bus with
|
|
no extra chipset is supported by this driver, or could be.
|
|
|
|
This driver is a replacement for (and was inspired by) an older
|
|
driver named i2c-philips-par. The new driver supports more devices,
|
|
and makes it easier to add support for new devices.
|
|
|
|
An adapter type parameter is now mandatory. Please read the file
|
|
Documentation/i2c/busses/i2c-parport for details.
|
|
|
|
Another driver exists, named i2c-parport-light, which doesn't depend
|
|
on the parport driver. This is meant for embedded systems. Don't say
|
|
Y here if you intend to say Y or M there.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-parport.
|
|
|
|
config I2C_PARPORT_LIGHT
|
|
tristate "Parallel port adapter (light)"
|
|
select I2C_ALGOBIT
|
|
select I2C_SMBUS
|
|
help
|
|
This supports parallel port I2C adapters such as the ones made by
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
|
Basically any adapter using the parallel port as an I2C bus with
|
|
no extra chipset is supported by this driver, or could be.
|
|
|
|
This driver is a light version of i2c-parport. It doesn't depend
|
|
on the parport driver, and uses direct I/O access instead. This
|
|
might be preferred on embedded systems where wasting memory for
|
|
the clean but heavy parport handling is not an option. The
|
|
drawback is a reduced portability and the impossibility to
|
|
daisy-chain other parallel port devices.
|
|
|
|
Don't say Y here if you said Y or M to i2c-parport. Saying M to
|
|
both is possible but both modules should not be loaded at the same
|
|
time.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-parport-light.
|
|
|
|
config I2C_TAOS_EVM
|
|
tristate "TAOS evaluation module"
|
|
depends on TTY
|
|
select SERIO
|
|
select SERIO_SERPORT
|
|
default n
|
|
help
|
|
This supports TAOS evaluation modules on serial port. In order to
|
|
use this driver, you will need the inputattach tool, which is part
|
|
of the input-utils package.
|
|
|
|
If unsure, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-taos-evm.
|
|
|
|
config I2C_TINY_USB
|
|
tristate "Tiny-USB adapter"
|
|
depends on USB
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
|
|
http://www.harbaum.org/till/i2c_tiny_usb for hardware details.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-tiny-usb.
|
|
|
|
config I2C_VIPERBOARD
|
|
tristate "Viperboard I2C master support"
|
|
depends on MFD_VIPERBOARD && USB
|
|
help
|
|
Say yes here to access the I2C part of the Nano River
|
|
Technologies Viperboard as I2C master.
|
|
See viperboard API specification and Nano
|
|
River Tech's viperboard.h for detailed meaning
|
|
of the module parameters.
|
|
|
|
comment "Other I2C/SMBus bus drivers"
|
|
|
|
config I2C_ACORN
|
|
tristate "Acorn IOC/IOMD I2C bus support"
|
|
depends on ARCH_ACORN
|
|
default y
|
|
select I2C_ALGOBIT
|
|
help
|
|
Say yes if you want to support the I2C bus on Acorn platforms.
|
|
|
|
If you don't know, say Y.
|
|
|
|
config I2C_ELEKTOR
|
|
tristate "Elektor ISA card"
|
|
depends on ISA && HAS_IOPORT && BROKEN_ON_SMP
|
|
select I2C_ALGOPCF
|
|
help
|
|
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
|
|
such an adapter.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called i2c-elektor.
|
|
|
|
config I2C_PCA_ISA
|
|
tristate "PCA9564/PCA9665 on an ISA bus"
|
|
depends on ISA
|
|
select I2C_ALGOPCA
|
|
default n
|
|
help
|
|
This driver supports ISA boards using the Philips PCA9564/PCA9665
|
|
parallel bus to I2C bus controller.
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
will be called i2c-pca-isa.
|
|
|
|
This device is almost undetectable and using this driver on a
|
|
system which doesn't have this device will result in long
|
|
delays when I2C/SMBus chip drivers are loaded (e.g. at boot
|
|
time). If unsure, say N.
|
|
|
|
config I2C_SIBYTE
|
|
tristate "SiByte SMBus interface"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
help
|
|
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
|
|
|
|
config SCx200_I2C
|
|
tristate "NatSemi SCx200 I2C using GPIO pins (DEPRECATED)"
|
|
depends on SCx200_GPIO
|
|
select I2C_ALGOBIT
|
|
help
|
|
Enable the use of two GPIO pins of a SCx200 processor as an I2C bus.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called scx200_i2c.
|
|
|
|
This driver is deprecated and will be dropped soon. Use i2c-gpio
|
|
(or scx200_acb) instead.
|
|
|
|
config SCx200_I2C_SCL
|
|
int "GPIO pin used for SCL"
|
|
depends on SCx200_I2C
|
|
default "12"
|
|
help
|
|
Enter the GPIO pin number used for the SCL signal. This value can
|
|
also be specified with a module parameter.
|
|
|
|
config SCx200_I2C_SDA
|
|
int "GPIO pin used for SDA"
|
|
depends on SCx200_I2C
|
|
default "13"
|
|
help
|
|
Enter the GPIO pin number used for the SSA signal. This value can
|
|
also be specified with a module parameter.
|
|
|
|
config SCx200_ACB
|
|
tristate "Geode ACCESS.bus support"
|
|
depends on X86_32 && PCI
|
|
help
|
|
Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
|
|
SC1100 processors and the CS5535 and CS5536 Geode companion devices.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
This support is also available as a module. If so, the module
|
|
will be called scx200_acb.
|
|
|
|
endmenu
|