mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 13:14:07 +08:00
4e2284d23b
time_after (as opposed to time_after_equal) already ensures that the cache lifetime is at least as much as requested. There is no point in manually adding another jiffy to that value, and this can confuse the reader into wrong interpretation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
798 lines
22 KiB
C
798 lines
22 KiB
C
/* tmp401.c
|
|
*
|
|
* Copyright (C) 2007,2008 Hans de Goede <hdegoede@redhat.com>
|
|
* Preliminary tmp411 support by:
|
|
* Gabriel Konat, Sander Leget, Wouter Willems
|
|
* Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
|
|
*
|
|
* Cleanup and support for TMP431 and TMP432 by Guenter Roeck
|
|
* Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
/*
|
|
* Driver for the Texas Instruments TMP401 SMBUS temperature sensor IC.
|
|
*
|
|
* Note this IC is in some aspect similar to the LM90, but it has quite a
|
|
* few differences too, for example the local temp has a higher resolution
|
|
* and thus has 16 bits registers for its value and limit instead of 8 bits.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
|
|
|
|
enum chips { tmp401, tmp411, tmp431, tmp432 };
|
|
|
|
/*
|
|
* The TMP401 registers, note some registers have different addresses for
|
|
* reading and writing
|
|
*/
|
|
#define TMP401_STATUS 0x02
|
|
#define TMP401_CONFIG_READ 0x03
|
|
#define TMP401_CONFIG_WRITE 0x09
|
|
#define TMP401_CONVERSION_RATE_READ 0x04
|
|
#define TMP401_CONVERSION_RATE_WRITE 0x0A
|
|
#define TMP401_TEMP_CRIT_HYST 0x21
|
|
#define TMP401_MANUFACTURER_ID_REG 0xFE
|
|
#define TMP401_DEVICE_ID_REG 0xFF
|
|
|
|
static const u8 TMP401_TEMP_MSB_READ[6][2] = {
|
|
{ 0x00, 0x01 }, /* temp */
|
|
{ 0x06, 0x08 }, /* low limit */
|
|
{ 0x05, 0x07 }, /* high limit */
|
|
{ 0x20, 0x19 }, /* therm (crit) limit */
|
|
{ 0x30, 0x34 }, /* lowest */
|
|
{ 0x32, 0x36 }, /* highest */
|
|
};
|
|
|
|
static const u8 TMP401_TEMP_MSB_WRITE[6][2] = {
|
|
{ 0, 0 }, /* temp (unused) */
|
|
{ 0x0C, 0x0E }, /* low limit */
|
|
{ 0x0B, 0x0D }, /* high limit */
|
|
{ 0x20, 0x19 }, /* therm (crit) limit */
|
|
{ 0x30, 0x34 }, /* lowest */
|
|
{ 0x32, 0x36 }, /* highest */
|
|
};
|
|
|
|
static const u8 TMP401_TEMP_LSB[6][2] = {
|
|
{ 0x15, 0x10 }, /* temp */
|
|
{ 0x17, 0x14 }, /* low limit */
|
|
{ 0x16, 0x13 }, /* high limit */
|
|
{ 0, 0 }, /* therm (crit) limit (unused) */
|
|
{ 0x31, 0x35 }, /* lowest */
|
|
{ 0x33, 0x37 }, /* highest */
|
|
};
|
|
|
|
static const u8 TMP432_TEMP_MSB_READ[4][3] = {
|
|
{ 0x00, 0x01, 0x23 }, /* temp */
|
|
{ 0x06, 0x08, 0x16 }, /* low limit */
|
|
{ 0x05, 0x07, 0x15 }, /* high limit */
|
|
{ 0x20, 0x19, 0x1A }, /* therm (crit) limit */
|
|
};
|
|
|
|
static const u8 TMP432_TEMP_MSB_WRITE[4][3] = {
|
|
{ 0, 0, 0 }, /* temp - unused */
|
|
{ 0x0C, 0x0E, 0x16 }, /* low limit */
|
|
{ 0x0B, 0x0D, 0x15 }, /* high limit */
|
|
{ 0x20, 0x19, 0x1A }, /* therm (crit) limit */
|
|
};
|
|
|
|
static const u8 TMP432_TEMP_LSB[3][3] = {
|
|
{ 0x29, 0x10, 0x24 }, /* temp */
|
|
{ 0x3E, 0x14, 0x18 }, /* low limit */
|
|
{ 0x3D, 0x13, 0x17 }, /* high limit */
|
|
};
|
|
|
|
/* [0] = fault, [1] = low, [2] = high, [3] = therm/crit */
|
|
static const u8 TMP432_STATUS_REG[] = {
|
|
0x1b, 0x36, 0x35, 0x37 };
|
|
|
|
/* Flags */
|
|
#define TMP401_CONFIG_RANGE BIT(2)
|
|
#define TMP401_CONFIG_SHUTDOWN BIT(6)
|
|
#define TMP401_STATUS_LOCAL_CRIT BIT(0)
|
|
#define TMP401_STATUS_REMOTE_CRIT BIT(1)
|
|
#define TMP401_STATUS_REMOTE_OPEN BIT(2)
|
|
#define TMP401_STATUS_REMOTE_LOW BIT(3)
|
|
#define TMP401_STATUS_REMOTE_HIGH BIT(4)
|
|
#define TMP401_STATUS_LOCAL_LOW BIT(5)
|
|
#define TMP401_STATUS_LOCAL_HIGH BIT(6)
|
|
|
|
/* On TMP432, each status has its own register */
|
|
#define TMP432_STATUS_LOCAL BIT(0)
|
|
#define TMP432_STATUS_REMOTE1 BIT(1)
|
|
#define TMP432_STATUS_REMOTE2 BIT(2)
|
|
|
|
/* Manufacturer / Device ID's */
|
|
#define TMP401_MANUFACTURER_ID 0x55
|
|
#define TMP401_DEVICE_ID 0x11
|
|
#define TMP411A_DEVICE_ID 0x12
|
|
#define TMP411B_DEVICE_ID 0x13
|
|
#define TMP411C_DEVICE_ID 0x10
|
|
#define TMP431_DEVICE_ID 0x31
|
|
#define TMP432_DEVICE_ID 0x32
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static const struct i2c_device_id tmp401_id[] = {
|
|
{ "tmp401", tmp401 },
|
|
{ "tmp411", tmp411 },
|
|
{ "tmp431", tmp431 },
|
|
{ "tmp432", tmp432 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, tmp401_id);
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct tmp401_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock;
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
enum chips kind;
|
|
|
|
unsigned int update_interval; /* in milliseconds */
|
|
|
|
/* register values */
|
|
u8 status[4];
|
|
u8 config;
|
|
u16 temp[6][3];
|
|
u8 temp_crit_hyst;
|
|
};
|
|
|
|
/*
|
|
* Sysfs attr show / store functions
|
|
*/
|
|
|
|
static int tmp401_register_to_temp(u16 reg, u8 config)
|
|
{
|
|
int temp = reg;
|
|
|
|
if (config & TMP401_CONFIG_RANGE)
|
|
temp -= 64 * 256;
|
|
|
|
return DIV_ROUND_CLOSEST(temp * 125, 32);
|
|
}
|
|
|
|
static u16 tmp401_temp_to_register(long temp, u8 config, int zbits)
|
|
{
|
|
if (config & TMP401_CONFIG_RANGE) {
|
|
temp = clamp_val(temp, -64000, 191000);
|
|
temp += 64000;
|
|
} else
|
|
temp = clamp_val(temp, 0, 127000);
|
|
|
|
return DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
|
|
}
|
|
|
|
static int tmp401_update_device_reg16(struct i2c_client *client,
|
|
struct tmp401_data *data)
|
|
{
|
|
int i, j, val;
|
|
int num_regs = data->kind == tmp411 ? 6 : 4;
|
|
int num_sensors = data->kind == tmp432 ? 3 : 2;
|
|
|
|
for (i = 0; i < num_sensors; i++) { /* local / r1 / r2 */
|
|
for (j = 0; j < num_regs; j++) { /* temp / low / ... */
|
|
u8 regaddr;
|
|
/*
|
|
* High byte must be read first immediately followed
|
|
* by the low byte
|
|
*/
|
|
regaddr = data->kind == tmp432 ?
|
|
TMP432_TEMP_MSB_READ[j][i] :
|
|
TMP401_TEMP_MSB_READ[j][i];
|
|
val = i2c_smbus_read_byte_data(client, regaddr);
|
|
if (val < 0)
|
|
return val;
|
|
data->temp[j][i] = val << 8;
|
|
if (j == 3) /* crit is msb only */
|
|
continue;
|
|
regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[j][i]
|
|
: TMP401_TEMP_LSB[j][i];
|
|
val = i2c_smbus_read_byte_data(client, regaddr);
|
|
if (val < 0)
|
|
return val;
|
|
data->temp[j][i] |= val;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct tmp401_data *tmp401_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct tmp401_data *data = i2c_get_clientdata(client);
|
|
struct tmp401_data *ret = data;
|
|
int i, val;
|
|
unsigned long next_update;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
next_update = data->last_updated +
|
|
msecs_to_jiffies(data->update_interval);
|
|
if (time_after(jiffies, next_update) || !data->valid) {
|
|
if (data->kind != tmp432) {
|
|
/*
|
|
* The driver uses the TMP432 status format internally.
|
|
* Convert status to TMP432 format for other chips.
|
|
*/
|
|
val = i2c_smbus_read_byte_data(client, TMP401_STATUS);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->status[0] =
|
|
(val & TMP401_STATUS_REMOTE_OPEN) >> 1;
|
|
data->status[1] =
|
|
((val & TMP401_STATUS_REMOTE_LOW) >> 2) |
|
|
((val & TMP401_STATUS_LOCAL_LOW) >> 5);
|
|
data->status[2] =
|
|
((val & TMP401_STATUS_REMOTE_HIGH) >> 3) |
|
|
((val & TMP401_STATUS_LOCAL_HIGH) >> 6);
|
|
data->status[3] = val & (TMP401_STATUS_LOCAL_CRIT
|
|
| TMP401_STATUS_REMOTE_CRIT);
|
|
} else {
|
|
for (i = 0; i < ARRAY_SIZE(data->status); i++) {
|
|
val = i2c_smbus_read_byte_data(client,
|
|
TMP432_STATUS_REG[i]);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->status[i] = val;
|
|
}
|
|
}
|
|
|
|
val = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->config = val;
|
|
val = tmp401_update_device_reg16(client, data);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
val = i2c_smbus_read_byte_data(client, TMP401_TEMP_CRIT_HYST);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->temp_crit_hyst = val;
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t show_temp(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr_2(devattr)->nr;
|
|
int index = to_sensor_dev_attr_2(devattr)->index;
|
|
struct tmp401_data *data = tmp401_update_device(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
return sprintf(buf, "%d\n",
|
|
tmp401_register_to_temp(data->temp[nr][index], data->config));
|
|
}
|
|
|
|
static ssize_t show_temp_crit_hyst(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int temp, index = to_sensor_dev_attr(devattr)->index;
|
|
struct tmp401_data *data = tmp401_update_device(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
temp = tmp401_register_to_temp(data->temp[3][index], data->config);
|
|
temp -= data->temp_crit_hyst * 1000;
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return sprintf(buf, "%d\n", temp);
|
|
}
|
|
|
|
static ssize_t show_status(struct device *dev,
|
|
struct device_attribute *devattr, char *buf)
|
|
{
|
|
int nr = to_sensor_dev_attr_2(devattr)->nr;
|
|
int mask = to_sensor_dev_attr_2(devattr)->index;
|
|
struct tmp401_data *data = tmp401_update_device(dev);
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
return sprintf(buf, "%d\n", !!(data->status[nr] & mask));
|
|
}
|
|
|
|
static ssize_t store_temp(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int nr = to_sensor_dev_attr_2(devattr)->nr;
|
|
int index = to_sensor_dev_attr_2(devattr)->index;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct tmp401_data *data = tmp401_update_device(dev);
|
|
long val;
|
|
u16 reg;
|
|
u8 regaddr;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
if (kstrtol(buf, 10, &val))
|
|
return -EINVAL;
|
|
|
|
reg = tmp401_temp_to_register(val, data->config, nr == 3 ? 8 : 4);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
regaddr = data->kind == tmp432 ? TMP432_TEMP_MSB_WRITE[nr][index]
|
|
: TMP401_TEMP_MSB_WRITE[nr][index];
|
|
i2c_smbus_write_byte_data(client, regaddr, reg >> 8);
|
|
if (nr != 3) {
|
|
regaddr = data->kind == tmp432 ? TMP432_TEMP_LSB[nr][index]
|
|
: TMP401_TEMP_LSB[nr][index];
|
|
i2c_smbus_write_byte_data(client, regaddr, reg & 0xFF);
|
|
}
|
|
data->temp[nr][index] = reg;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t store_temp_crit_hyst(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
int temp, index = to_sensor_dev_attr(devattr)->index;
|
|
struct tmp401_data *data = tmp401_update_device(dev);
|
|
long val;
|
|
u8 reg;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
if (kstrtol(buf, 10, &val))
|
|
return -EINVAL;
|
|
|
|
if (data->config & TMP401_CONFIG_RANGE)
|
|
val = clamp_val(val, -64000, 191000);
|
|
else
|
|
val = clamp_val(val, 0, 127000);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
temp = tmp401_register_to_temp(data->temp[3][index], data->config);
|
|
val = clamp_val(val, temp - 255000, temp);
|
|
reg = ((temp - val) + 500) / 1000;
|
|
|
|
i2c_smbus_write_byte_data(to_i2c_client(dev), TMP401_TEMP_CRIT_HYST,
|
|
reg);
|
|
|
|
data->temp_crit_hyst = reg;
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Resets the historical measurements of minimum and maximum temperatures.
|
|
* This is done by writing any value to any of the minimum/maximum registers
|
|
* (0x30-0x37).
|
|
*/
|
|
static ssize_t reset_temp_history(struct device *dev,
|
|
struct device_attribute *devattr, const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct tmp401_data *data = i2c_get_clientdata(client);
|
|
long val;
|
|
|
|
if (kstrtol(buf, 10, &val))
|
|
return -EINVAL;
|
|
|
|
if (val != 1) {
|
|
dev_err(dev,
|
|
"temp_reset_history value %ld not supported. Use 1 to reset the history!\n",
|
|
val);
|
|
return -EINVAL;
|
|
}
|
|
mutex_lock(&data->update_lock);
|
|
i2c_smbus_write_byte_data(client, TMP401_TEMP_MSB_WRITE[5][0], val);
|
|
data->valid = 0;
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_update_interval(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct tmp401_data *data = i2c_get_clientdata(client);
|
|
|
|
return sprintf(buf, "%u\n", data->update_interval);
|
|
}
|
|
|
|
static ssize_t set_update_interval(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct tmp401_data *data = i2c_get_clientdata(client);
|
|
unsigned long val;
|
|
int err, rate;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
/*
|
|
* For valid rates, interval can be calculated as
|
|
* interval = (1 << (7 - rate)) * 125;
|
|
* Rounded rate is therefore
|
|
* rate = 7 - __fls(interval * 4 / (125 * 3));
|
|
* Use clamp_val() to avoid overflows, and to ensure valid input
|
|
* for __fls.
|
|
*/
|
|
val = clamp_val(val, 125, 16000);
|
|
rate = 7 - __fls(val * 4 / (125 * 3));
|
|
mutex_lock(&data->update_lock);
|
|
i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, rate);
|
|
data->update_interval = (1 << (7 - rate)) * 125;
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_min, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 1, 0);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 2, 0);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 3, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO,
|
|
show_temp_crit_hyst, store_temp_crit_hyst, 0);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_status, NULL,
|
|
1, TMP432_STATUS_LOCAL);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_status, NULL,
|
|
2, TMP432_STATUS_LOCAL);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_status, NULL,
|
|
3, TMP432_STATUS_LOCAL);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_min, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 1, 1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 2, 1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 3, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst,
|
|
NULL, 1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_status, NULL,
|
|
0, TMP432_STATUS_REMOTE1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_status, NULL,
|
|
1, TMP432_STATUS_REMOTE1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_status, NULL,
|
|
2, TMP432_STATUS_REMOTE1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_status, NULL,
|
|
3, TMP432_STATUS_REMOTE1);
|
|
|
|
static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
|
|
set_update_interval);
|
|
|
|
static struct attribute *tmp401_attributes[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_crit.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_crit.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
|
|
|
|
&dev_attr_update_interval.attr,
|
|
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group tmp401_group = {
|
|
.attrs = tmp401_attributes,
|
|
};
|
|
|
|
/*
|
|
* Additional features of the TMP411 chip.
|
|
* The TMP411 stores the minimum and maximum
|
|
* temperature measured since power-on, chip-reset, or
|
|
* minimum and maximum register reset for both the local
|
|
* and remote channels.
|
|
*/
|
|
static SENSOR_DEVICE_ATTR_2(temp1_lowest, S_IRUGO, show_temp, NULL, 4, 0);
|
|
static SENSOR_DEVICE_ATTR_2(temp1_highest, S_IRUGO, show_temp, NULL, 5, 0);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_lowest, S_IRUGO, show_temp, NULL, 4, 1);
|
|
static SENSOR_DEVICE_ATTR_2(temp2_highest, S_IRUGO, show_temp, NULL, 5, 1);
|
|
static SENSOR_DEVICE_ATTR(temp_reset_history, S_IWUSR, NULL, reset_temp_history,
|
|
0);
|
|
|
|
static struct attribute *tmp411_attributes[] = {
|
|
&sensor_dev_attr_temp1_highest.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_highest.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_temp_reset_history.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group tmp411_group = {
|
|
.attrs = tmp411_attributes,
|
|
};
|
|
|
|
static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 1, 2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 2, 2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IWUSR | S_IRUGO, show_temp,
|
|
store_temp, 3, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst,
|
|
NULL, 2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_status, NULL,
|
|
0, TMP432_STATUS_REMOTE2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_status, NULL,
|
|
1, TMP432_STATUS_REMOTE2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_status, NULL,
|
|
2, TMP432_STATUS_REMOTE2);
|
|
static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_status, NULL,
|
|
3, TMP432_STATUS_REMOTE2);
|
|
|
|
static struct attribute *tmp432_attributes[] = {
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_crit.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_fault.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
|
|
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group tmp432_group = {
|
|
.attrs = tmp432_attributes,
|
|
};
|
|
|
|
/*
|
|
* Begin non sysfs callback code (aka Real code)
|
|
*/
|
|
|
|
static void tmp401_init_client(struct i2c_client *client)
|
|
{
|
|
int config, config_orig;
|
|
struct tmp401_data *data = i2c_get_clientdata(client);
|
|
|
|
/* Set the conversion rate to 2 Hz */
|
|
i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
|
|
data->update_interval = 500;
|
|
|
|
/* Start conversions (disable shutdown if necessary) */
|
|
config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
|
|
if (config < 0) {
|
|
dev_warn(&client->dev, "Initialization failed!\n");
|
|
return;
|
|
}
|
|
|
|
config_orig = config;
|
|
config &= ~TMP401_CONFIG_SHUTDOWN;
|
|
|
|
if (config != config_orig)
|
|
i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
|
|
}
|
|
|
|
static int tmp401_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
enum chips kind;
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
u8 reg;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
/* Detect and identify the chip */
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_MANUFACTURER_ID_REG);
|
|
if (reg != TMP401_MANUFACTURER_ID)
|
|
return -ENODEV;
|
|
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_DEVICE_ID_REG);
|
|
|
|
switch (reg) {
|
|
case TMP401_DEVICE_ID:
|
|
if (client->addr != 0x4c)
|
|
return -ENODEV;
|
|
kind = tmp401;
|
|
break;
|
|
case TMP411A_DEVICE_ID:
|
|
if (client->addr != 0x4c)
|
|
return -ENODEV;
|
|
kind = tmp411;
|
|
break;
|
|
case TMP411B_DEVICE_ID:
|
|
if (client->addr != 0x4d)
|
|
return -ENODEV;
|
|
kind = tmp411;
|
|
break;
|
|
case TMP411C_DEVICE_ID:
|
|
if (client->addr != 0x4e)
|
|
return -ENODEV;
|
|
kind = tmp411;
|
|
break;
|
|
case TMP431_DEVICE_ID:
|
|
if (client->addr == 0x4e)
|
|
return -ENODEV;
|
|
kind = tmp431;
|
|
break;
|
|
case TMP432_DEVICE_ID:
|
|
if (client->addr == 0x4e)
|
|
return -ENODEV;
|
|
kind = tmp432;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
|
|
if (reg & 0x1b)
|
|
return -ENODEV;
|
|
|
|
reg = i2c_smbus_read_byte_data(client, TMP401_CONVERSION_RATE_READ);
|
|
/* Datasheet says: 0x1-0x6 */
|
|
if (reg > 15)
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, tmp401_id[kind].name, I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_remove(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct tmp401_data *data = i2c_get_clientdata(client);
|
|
|
|
if (data->hwmon_dev)
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
sysfs_remove_group(&dev->kobj, &tmp401_group);
|
|
|
|
if (data->kind == tmp411)
|
|
sysfs_remove_group(&dev->kobj, &tmp411_group);
|
|
|
|
if (data->kind == tmp432)
|
|
sysfs_remove_group(&dev->kobj, &tmp432_group);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tmp401_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
int err;
|
|
struct tmp401_data *data;
|
|
const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
data->kind = id->driver_data;
|
|
|
|
/* Initialize the TMP401 chip */
|
|
tmp401_init_client(client);
|
|
|
|
/* Register sysfs hooks */
|
|
err = sysfs_create_group(&dev->kobj, &tmp401_group);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Register additional tmp411 sysfs hooks */
|
|
if (data->kind == tmp411) {
|
|
err = sysfs_create_group(&dev->kobj, &tmp411_group);
|
|
if (err)
|
|
goto exit_remove;
|
|
}
|
|
|
|
/* Register additional tmp432 sysfs hooks */
|
|
if (data->kind == tmp432) {
|
|
err = sysfs_create_group(&dev->kobj, &tmp432_group);
|
|
if (err)
|
|
goto exit_remove;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
data->hwmon_dev = NULL;
|
|
goto exit_remove;
|
|
}
|
|
|
|
dev_info(dev, "Detected TI %s chip\n", names[data->kind]);
|
|
|
|
return 0;
|
|
|
|
exit_remove:
|
|
tmp401_remove(client);
|
|
return err;
|
|
}
|
|
|
|
static struct i2c_driver tmp401_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "tmp401",
|
|
},
|
|
.probe = tmp401_probe,
|
|
.remove = tmp401_remove,
|
|
.id_table = tmp401_id,
|
|
.detect = tmp401_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(tmp401_driver);
|
|
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("Texas Instruments TMP401 temperature sensor driver");
|
|
MODULE_LICENSE("GPL");
|