mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
945d004788
The OPP properties, like "operating-points", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can create an OPP table. Add such missing properties. Fix other missing properties (clocks, clock latency) as well to make it all work. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Olof Johansson <olof@lixom.net>
541 lines
12 KiB
Plaintext
541 lines
12 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
|
|
*
|
|
* Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
|
|
*
|
|
* based on GPL'ed 2.6 kernel sources
|
|
* (c) Marvell International Ltd.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/berlin2.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
model = "Marvell Armada 1500 (BG2) SoC";
|
|
compatible = "marvell,berlin2", "marvell,berlin";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "marvell,berlin-smp";
|
|
|
|
cpu@0 {
|
|
compatible = "marvell,pj4b";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <0>;
|
|
|
|
clocks = <&chip_clk CLKID_CPU>;
|
|
clock-latency = <100000>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1200000 1200000
|
|
1000000 1200000
|
|
800000 1200000
|
|
600000 1200000
|
|
>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "marvell,pj4b";
|
|
device_type = "cpu";
|
|
next-level-cache = <&l2>;
|
|
reg = <1>;
|
|
|
|
clocks = <&chip_clk CLKID_CPU>;
|
|
clock-latency = <100000>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1200000 1200000
|
|
1000000 1200000
|
|
800000 1200000
|
|
600000 1200000
|
|
>;
|
|
};
|
|
};
|
|
|
|
refclk: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <25000000>;
|
|
};
|
|
|
|
soc@f7000000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
|
|
ranges = <0 0xf7000000 0x1000000>;
|
|
|
|
sdhci0: sdhci@ab0000 {
|
|
compatible = "mrvl,pxav3-mmc";
|
|
reg = <0xab0000 0x200>;
|
|
clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
|
|
clock-names = "io", "core";
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci1: sdhci@ab0800 {
|
|
compatible = "mrvl,pxav3-mmc";
|
|
reg = <0xab0800 0x200>;
|
|
clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
|
|
clock-names = "io", "core";
|
|
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci2: sdhci@ab1000 {
|
|
compatible = "mrvl,pxav3-mmc";
|
|
reg = <0xab1000 0x200>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
|
|
clock-names = "io", "core";
|
|
pinctrl-0 = <&emmc_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
l2: l2-cache-controller@ac0000 {
|
|
compatible = "marvell,tauros3-cache", "arm,pl310-cache";
|
|
reg = <0xac0000 0x1000>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
scu: snoop-control-unit@ad0000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xad0000 0x58>;
|
|
};
|
|
|
|
gic: interrupt-controller@ad1000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
};
|
|
|
|
local-timer@ad0600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xad0600 0x20>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
|
|
clocks = <&chip_clk CLKID_TWD>;
|
|
};
|
|
|
|
eth1: ethernet@b90000 {
|
|
compatible = "marvell,pxa168-eth";
|
|
reg = <0xb90000 0x10000>;
|
|
clocks = <&chip_clk CLKID_GETH1>;
|
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
|
/* set by bootloader */
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy-connection-type = "mii";
|
|
phy-handle = <ðphy1>;
|
|
status = "disabled";
|
|
|
|
ethphy1: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
cpu-ctrl@dd0000 {
|
|
compatible = "marvell,berlin-cpu-ctrl";
|
|
reg = <0xdd0000 0x10000>;
|
|
};
|
|
|
|
eth0: ethernet@e50000 {
|
|
compatible = "marvell,pxa168-eth";
|
|
reg = <0xe50000 0x10000>;
|
|
clocks = <&chip_clk CLKID_GETH0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
/* set by bootloader */
|
|
local-mac-address = [00 00 00 00 00 00];
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy-connection-type = "mii";
|
|
phy-handle = <ðphy0>;
|
|
status = "disabled";
|
|
|
|
ethphy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
apb@e80000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0 0xe80000 0x10000>;
|
|
interrupt-parent = <&aic>;
|
|
|
|
gpio0: gpio@400 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x0400 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
porta: gpio-port@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0>;
|
|
};
|
|
};
|
|
|
|
gpio1: gpio@800 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x0800 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portb: gpio-port@1 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <1>;
|
|
};
|
|
};
|
|
|
|
gpio2: gpio@c00 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x0c00 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portc: gpio-port@2 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <2>;
|
|
};
|
|
};
|
|
|
|
gpio3: gpio@1000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x1000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portd: gpio-port@3 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <3>;
|
|
};
|
|
};
|
|
|
|
timer0: timer@2c00 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c00 0x14>;
|
|
interrupts = <8>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "okay";
|
|
};
|
|
|
|
timer1: timer@2c14 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c14 0x14>;
|
|
interrupts = <9>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "okay";
|
|
};
|
|
|
|
timer2: timer@2c28 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c28 0x14>;
|
|
interrupts = <10>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer3: timer@2c3c {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c3c 0x14>;
|
|
interrupts = <11>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer4: timer@2c50 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c50 0x14>;
|
|
interrupts = <12>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer5: timer@2c64 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c64 0x14>;
|
|
interrupts = <13>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer6: timer@2c78 {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c78 0x14>;
|
|
interrupts = <14>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer7: timer@2c8c {
|
|
compatible = "snps,dw-apb-timer";
|
|
reg = <0x2c8c 0x14>;
|
|
interrupts = <15>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
clock-names = "timer";
|
|
status = "disabled";
|
|
};
|
|
|
|
aic: interrupt-controller@3000 {
|
|
compatible = "snps,dw-apb-ictl";
|
|
reg = <0x3000 0xc00>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
ahci: sata@e90000 {
|
|
compatible = "marvell,berlin2-ahci", "generic-ahci";
|
|
reg = <0xe90000 0x1000>;
|
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&chip_clk CLKID_SATA>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata0: sata-port@0 {
|
|
reg = <0>;
|
|
phys = <&sata_phy 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata1: sata-port@1 {
|
|
reg = <1>;
|
|
phys = <&sata_phy 1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
sata_phy: phy@e900a0 {
|
|
compatible = "marvell,berlin2-sata-phy";
|
|
reg = <0xe900a0 0x200>;
|
|
clocks = <&chip_clk CLKID_SATA>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
#phy-cells = <1>;
|
|
status = "disabled";
|
|
|
|
sata-phy@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
sata-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
chip: chip-control@ea0000 {
|
|
compatible = "simple-mfd", "syscon";
|
|
reg = <0xea0000 0x400>;
|
|
|
|
chip_clk: clock {
|
|
compatible = "marvell,berlin2-clk";
|
|
#clock-cells = <1>;
|
|
clocks = <&refclk>;
|
|
clock-names = "refclk";
|
|
};
|
|
|
|
soc_pinctrl: pin-controller {
|
|
compatible = "marvell,berlin2-soc-pinctrl";
|
|
|
|
emmc_pmux: emmc-pmux {
|
|
groups = "G26";
|
|
function = "emmc";
|
|
};
|
|
};
|
|
|
|
chip_rst: reset {
|
|
compatible = "marvell,berlin2-reset";
|
|
#reset-cells = <2>;
|
|
};
|
|
};
|
|
|
|
pwm: pwm@f20000 {
|
|
compatible = "marvell,berlin-pwm";
|
|
reg = <0xf20000 0x40>;
|
|
clocks = <&chip_clk CLKID_CFG>;
|
|
#pwm-cells = <3>;
|
|
};
|
|
|
|
apb@fc0000 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
ranges = <0 0xfc0000 0x10000>;
|
|
interrupt-parent = <&sic>;
|
|
|
|
wdt0: watchdog@1000 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0x1000 0x100>;
|
|
clocks = <&refclk>;
|
|
interrupts = <0>;
|
|
};
|
|
|
|
wdt1: watchdog@2000 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0x2000 0x100>;
|
|
clocks = <&refclk>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
wdt2: watchdog@3000 {
|
|
compatible = "snps,dw-wdt";
|
|
reg = <0x3000 0x100>;
|
|
clocks = <&refclk>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
sm_gpio1: gpio@5000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x5000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
portf: gpio-port@5 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
sm_gpio0: gpio@c000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0xc000 0x400>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
porte: gpio-port@4 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <11>;
|
|
};
|
|
};
|
|
|
|
uart0: serial@9000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x9000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
interrupts = <8>;
|
|
clocks = <&refclk>;
|
|
pinctrl-0 = <&uart0_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@a000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xa000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
interrupts = <9>;
|
|
clocks = <&refclk>;
|
|
pinctrl-0 = <&uart1_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@b000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0xb000 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <1>;
|
|
interrupts = <10>;
|
|
clocks = <&refclk>;
|
|
pinctrl-0 = <&uart2_pmux>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
sysctrl: system-controller@d000 {
|
|
compatible = "simple-mfd", "syscon";
|
|
reg = <0xd000 0x100>;
|
|
|
|
sys_pinctrl: pin-controller {
|
|
compatible = "marvell,berlin2-system-pinctrl";
|
|
uart0_pmux: uart0-pmux {
|
|
groups = "GSM4";
|
|
function = "uart0";
|
|
};
|
|
|
|
uart1_pmux: uart1-pmux {
|
|
groups = "GSM5";
|
|
function = "uart1";
|
|
};
|
|
uart2_pmux: uart2-pmux {
|
|
groups = "GSM3";
|
|
function = "uart2";
|
|
};
|
|
};
|
|
};
|
|
|
|
sic: interrupt-controller@e000 {
|
|
compatible = "snps,dw-apb-ictl";
|
|
reg = <0xe000 0x400>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
};
|