mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 01:24:12 +08:00
613cbb91e9
The CSI2 specification specifies a standard method to access camera sensor registers called "Camera Control Interface (CCI)". This uses either 8 or 16 bit (big-endian wire order) register addresses and supports 8, 16, 24 or 32 bit (big-endian wire order) register widths. Currently a lot of Linux camera sensor drivers all have their own custom helpers for this, often copy and pasted from other drivers. Add a set of generic helpers for this so that all sensor drivers can switch to a single common implementation. These helpers take an extra optional "int *err" function parameter, this can be used to chain a bunch of register accesses together with only a single error check at the end, rather than needing to error check each individual register access. The first failing call will set the contents of err to a non 0 value and all other calls will then become no-ops. Link: https://lore.kernel.org/linux-media/59aefa7f-7bf9-6736-6040-39551329cd0a@redhat.com/ Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com> Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
126 lines
4.0 KiB
C
126 lines
4.0 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* MIPI Camera Control Interface (CCI) register access helpers.
|
|
*
|
|
* Copyright (C) 2023 Hans de Goede <hansg@kernel.org>
|
|
*/
|
|
#ifndef _V4L2_CCI_H
|
|
#define _V4L2_CCI_H
|
|
|
|
#include <linux/types.h>
|
|
|
|
struct i2c_client;
|
|
struct regmap;
|
|
|
|
/**
|
|
* struct cci_reg_sequence - An individual write from a sequence of CCI writes
|
|
*
|
|
* @reg: Register address, use CCI_REG#() macros to encode reg width
|
|
* @val: Register value
|
|
*
|
|
* Register/value pairs for sequences of writes.
|
|
*/
|
|
struct cci_reg_sequence {
|
|
u32 reg;
|
|
u64 val;
|
|
};
|
|
|
|
/*
|
|
* Macros to define register address with the register width encoded
|
|
* into the higher bits.
|
|
*/
|
|
#define CCI_REG_ADDR_MASK GENMASK(15, 0)
|
|
#define CCI_REG_WIDTH_SHIFT 16
|
|
#define CCI_REG_WIDTH_MASK GENMASK(19, 16)
|
|
|
|
#define CCI_REG8(x) ((1 << CCI_REG_WIDTH_SHIFT) | (x))
|
|
#define CCI_REG16(x) ((2 << CCI_REG_WIDTH_SHIFT) | (x))
|
|
#define CCI_REG24(x) ((3 << CCI_REG_WIDTH_SHIFT) | (x))
|
|
#define CCI_REG32(x) ((4 << CCI_REG_WIDTH_SHIFT) | (x))
|
|
#define CCI_REG64(x) ((8 << CCI_REG_WIDTH_SHIFT) | (x))
|
|
|
|
/**
|
|
* cci_read() - Read a value from a single CCI register
|
|
*
|
|
* @map: Register map to read from
|
|
* @reg: Register address to read, use CCI_REG#() macros to encode reg width
|
|
* @val: Pointer to store read value
|
|
* @err: Optional pointer to store errors, if a previous error is set
|
|
* then the read will be skipped
|
|
*
|
|
* Return: %0 on success or a negative error code on failure.
|
|
*/
|
|
int cci_read(struct regmap *map, u32 reg, u64 *val, int *err);
|
|
|
|
/**
|
|
* cci_write() - Write a value to a single CCI register
|
|
*
|
|
* @map: Register map to write to
|
|
* @reg: Register address to write, use CCI_REG#() macros to encode reg width
|
|
* @val: Value to be written
|
|
* @err: Optional pointer to store errors, if a previous error is set
|
|
* then the write will be skipped
|
|
*
|
|
* Return: %0 on success or a negative error code on failure.
|
|
*/
|
|
int cci_write(struct regmap *map, u32 reg, u64 val, int *err);
|
|
|
|
/**
|
|
* cci_update_bits() - Perform a read/modify/write cycle on
|
|
* a single CCI register
|
|
*
|
|
* @map: Register map to update
|
|
* @reg: Register address to update, use CCI_REG#() macros to encode reg width
|
|
* @mask: Bitmask to change
|
|
* @val: New value for bitmask
|
|
* @err: Optional pointer to store errors, if a previous error is set
|
|
* then the update will be skipped
|
|
*
|
|
* Note this uses read-modify-write to update the bits, atomicity with regards
|
|
* to other cci_*() register access functions is NOT guaranteed.
|
|
*
|
|
* Return: %0 on success or a negative error code on failure.
|
|
*/
|
|
int cci_update_bits(struct regmap *map, u32 reg, u64 mask, u64 val, int *err);
|
|
|
|
/**
|
|
* cci_multi_reg_write() - Write multiple registers to the device
|
|
*
|
|
* @map: Register map to write to
|
|
* @regs: Array of structures containing register-address, -value pairs to be
|
|
* written, register-addresses use CCI_REG#() macros to encode reg width
|
|
* @num_regs: Number of registers to write
|
|
* @err: Optional pointer to store errors, if a previous error is set
|
|
* then the write will be skipped
|
|
*
|
|
* Write multiple registers to the device where the set of register, value
|
|
* pairs are supplied in any order, possibly not all in a single range.
|
|
*
|
|
* Use of the CCI_REG#() macros to encode reg width is mandatory.
|
|
*
|
|
* For raw lists of register-address, -value pairs with only 8 bit
|
|
* wide writes regmap_multi_reg_write() can be used instead.
|
|
*
|
|
* Return: %0 on success or a negative error code on failure.
|
|
*/
|
|
int cci_multi_reg_write(struct regmap *map, const struct cci_reg_sequence *regs,
|
|
unsigned int num_regs, int *err);
|
|
|
|
#if IS_ENABLED(CONFIG_V4L2_CCI_I2C)
|
|
/**
|
|
* devm_cci_regmap_init_i2c() - Create regmap to use with cci_*() register
|
|
* access functions
|
|
*
|
|
* @client: i2c_client to create the regmap for
|
|
* @reg_addr_bits: register address width to use (8 or 16)
|
|
*
|
|
* Note the memory for the created regmap is devm() managed, tied to the client.
|
|
*
|
|
* Return: %0 on success or a negative error code on failure.
|
|
*/
|
|
struct regmap *devm_cci_regmap_init_i2c(struct i2c_client *client,
|
|
int reg_addr_bits);
|
|
#endif
|
|
|
|
#endif
|