linux/kernel/watchdog_hld.c
Thomas Gleixner 3e863259c4 watchdog/perf: properly initialize the turbo mode timestamp and rearm counter
commit f944ffcbc2 upstream.

For systems on which the performance counter can expire early due to turbo
modes the watchdog handler has a safety net in place which validates that
since the last watchdog event there has at least 4/5th of the watchdog
period elapsed.

This works reliably only after the first watchdog event because the per
CPU variable which holds the timestamp of the last event is never
initialized.

So a first spurious event will validate against a timestamp of 0 which
results in a delta which is likely to be way over the 4/5 threshold of the
period.  As this might happen before the first watchdog hrtimer event
increments the watchdog counter, this can lead to false positives.

Fix this by initializing the timestamp before enabling the hardware event.
Reset the rearm counter as well, as that might be non zero after the
watchdog was disabled and reenabled.

Link: https://lkml.kernel.org/r/87frsfu15a.ffs@tglx
Fixes: 7edaeb6841 ("kernel/watchdog: Prevent false positives with turbo modes")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-03 08:49:42 +02:00

302 lines
7.9 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Detect hard lockups on a system
*
* started by Don Zickus, Copyright (C) 2010 Red Hat, Inc.
*
* Note: Most of this code is borrowed heavily from the original softlockup
* detector, so thanks to Ingo for the initial implementation.
* Some chunks also taken from the old x86-specific nmi watchdog code, thanks
* to those contributors as well.
*/
#define pr_fmt(fmt) "NMI watchdog: " fmt
#include <linux/nmi.h>
#include <linux/atomic.h>
#include <linux/module.h>
#include <linux/sched/debug.h>
#include <asm/irq_regs.h>
#include <linux/perf_event.h>
static DEFINE_PER_CPU(bool, hard_watchdog_warn);
static DEFINE_PER_CPU(bool, watchdog_nmi_touch);
static DEFINE_PER_CPU(struct perf_event *, watchdog_ev);
static DEFINE_PER_CPU(struct perf_event *, dead_event);
static struct cpumask dead_events_mask;
static unsigned long hardlockup_allcpu_dumped;
static atomic_t watchdog_cpus = ATOMIC_INIT(0);
notrace void arch_touch_nmi_watchdog(void)
{
/*
* Using __raw here because some code paths have
* preemption enabled. If preemption is enabled
* then interrupts should be enabled too, in which
* case we shouldn't have to worry about the watchdog
* going off.
*/
raw_cpu_write(watchdog_nmi_touch, true);
}
EXPORT_SYMBOL(arch_touch_nmi_watchdog);
#ifdef CONFIG_HARDLOCKUP_CHECK_TIMESTAMP
static DEFINE_PER_CPU(ktime_t, last_timestamp);
static DEFINE_PER_CPU(unsigned int, nmi_rearmed);
static ktime_t watchdog_hrtimer_sample_threshold __read_mostly;
void watchdog_update_hrtimer_threshold(u64 period)
{
/*
* The hrtimer runs with a period of (watchdog_threshold * 2) / 5
*
* So it runs effectively with 2.5 times the rate of the NMI
* watchdog. That means the hrtimer should fire 2-3 times before
* the NMI watchdog expires. The NMI watchdog on x86 is based on
* unhalted CPU cycles, so if Turbo-Mode is enabled the CPU cycles
* might run way faster than expected and the NMI fires in a
* smaller period than the one deduced from the nominal CPU
* frequency. Depending on the Turbo-Mode factor this might be fast
* enough to get the NMI period smaller than the hrtimer watchdog
* period and trigger false positives.
*
* The sample threshold is used to check in the NMI handler whether
* the minimum time between two NMI samples has elapsed. That
* prevents false positives.
*
* Set this to 4/5 of the actual watchdog threshold period so the
* hrtimer is guaranteed to fire at least once within the real
* watchdog threshold.
*/
watchdog_hrtimer_sample_threshold = period * 2;
}
static bool watchdog_check_timestamp(void)
{
ktime_t delta, now = ktime_get_mono_fast_ns();
delta = now - __this_cpu_read(last_timestamp);
if (delta < watchdog_hrtimer_sample_threshold) {
/*
* If ktime is jiffies based, a stalled timer would prevent
* jiffies from being incremented and the filter would look
* at a stale timestamp and never trigger.
*/
if (__this_cpu_inc_return(nmi_rearmed) < 10)
return false;
}
__this_cpu_write(nmi_rearmed, 0);
__this_cpu_write(last_timestamp, now);
return true;
}
static void watchdog_init_timestamp(void)
{
__this_cpu_write(nmi_rearmed, 0);
__this_cpu_write(last_timestamp, ktime_get_mono_fast_ns());
}
#else
static inline bool watchdog_check_timestamp(void) { return true; }
static inline void watchdog_init_timestamp(void) { }
#endif
static struct perf_event_attr wd_hw_attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
.size = sizeof(struct perf_event_attr),
.pinned = 1,
.disabled = 1,
};
/* Callback function for perf event subsystem */
static void watchdog_overflow_callback(struct perf_event *event,
struct perf_sample_data *data,
struct pt_regs *regs)
{
/* Ensure the watchdog never gets throttled */
event->hw.interrupts = 0;
if (!watchdog_check_timestamp())
return;
if (__this_cpu_read(watchdog_nmi_touch) == true) {
__this_cpu_write(watchdog_nmi_touch, false);
return;
}
/* check for a hardlockup
* This is done by making sure our timer interrupt
* is incrementing. The timer interrupt should have
* fired multiple times before we overflow'd. If it hasn't
* then this is a good indication the cpu is stuck
*/
if (is_hardlockup()) {
int this_cpu = smp_processor_id();
/* only print hardlockups once */
if (__this_cpu_read(hard_watchdog_warn) == true)
return;
pr_emerg("Watchdog detected hard LOCKUP on cpu %d\n",
this_cpu);
print_modules();
print_irqtrace_events(current);
if (regs)
show_regs(regs);
else
dump_stack();
/*
* Perform all-CPU dump only once to avoid multiple hardlockups
* generating interleaving traces
*/
if (sysctl_hardlockup_all_cpu_backtrace &&
!test_and_set_bit(0, &hardlockup_allcpu_dumped))
trigger_allbutself_cpu_backtrace();
if (hardlockup_panic)
nmi_panic(regs, "Hard LOCKUP");
__this_cpu_write(hard_watchdog_warn, true);
return;
}
__this_cpu_write(hard_watchdog_warn, false);
return;
}
static int hardlockup_detector_event_create(void)
{
unsigned int cpu = smp_processor_id();
struct perf_event_attr *wd_attr;
struct perf_event *evt;
wd_attr = &wd_hw_attr;
wd_attr->sample_period = hw_nmi_get_sample_period(watchdog_thresh);
/* Try to register using hardware perf events */
evt = perf_event_create_kernel_counter(wd_attr, cpu, NULL,
watchdog_overflow_callback, NULL);
if (IS_ERR(evt)) {
pr_debug("Perf event create on CPU %d failed with %ld\n", cpu,
PTR_ERR(evt));
return PTR_ERR(evt);
}
this_cpu_write(watchdog_ev, evt);
return 0;
}
/**
* hardlockup_detector_perf_enable - Enable the local event
*/
void hardlockup_detector_perf_enable(void)
{
if (hardlockup_detector_event_create())
return;
/* use original value for check */
if (!atomic_fetch_inc(&watchdog_cpus))
pr_info("Enabled. Permanently consumes one hw-PMU counter.\n");
watchdog_init_timestamp();
perf_event_enable(this_cpu_read(watchdog_ev));
}
/**
* hardlockup_detector_perf_disable - Disable the local event
*/
void hardlockup_detector_perf_disable(void)
{
struct perf_event *event = this_cpu_read(watchdog_ev);
if (event) {
perf_event_disable(event);
this_cpu_write(watchdog_ev, NULL);
this_cpu_write(dead_event, event);
cpumask_set_cpu(smp_processor_id(), &dead_events_mask);
atomic_dec(&watchdog_cpus);
}
}
/**
* hardlockup_detector_perf_cleanup - Cleanup disabled events and destroy them
*
* Called from lockup_detector_cleanup(). Serialized by the caller.
*/
void hardlockup_detector_perf_cleanup(void)
{
int cpu;
for_each_cpu(cpu, &dead_events_mask) {
struct perf_event *event = per_cpu(dead_event, cpu);
/*
* Required because for_each_cpu() reports unconditionally
* CPU0 as set on UP kernels. Sigh.
*/
if (event)
perf_event_release_kernel(event);
per_cpu(dead_event, cpu) = NULL;
}
cpumask_clear(&dead_events_mask);
}
/**
* hardlockup_detector_perf_stop - Globally stop watchdog events
*
* Special interface for x86 to handle the perf HT bug.
*/
void __init hardlockup_detector_perf_stop(void)
{
int cpu;
lockdep_assert_cpus_held();
for_each_online_cpu(cpu) {
struct perf_event *event = per_cpu(watchdog_ev, cpu);
if (event)
perf_event_disable(event);
}
}
/**
* hardlockup_detector_perf_restart - Globally restart watchdog events
*
* Special interface for x86 to handle the perf HT bug.
*/
void __init hardlockup_detector_perf_restart(void)
{
int cpu;
lockdep_assert_cpus_held();
if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED))
return;
for_each_online_cpu(cpu) {
struct perf_event *event = per_cpu(watchdog_ev, cpu);
if (event)
perf_event_enable(event);
}
}
/**
* hardlockup_detector_perf_init - Probe whether NMI event is available at all
*/
int __init hardlockup_detector_perf_init(void)
{
int ret = hardlockup_detector_event_create();
if (ret) {
pr_info("Perf NMI watchdog permanently disabled\n");
} else {
perf_event_release_kernel(this_cpu_read(watchdog_ev));
this_cpu_write(watchdog_ev, NULL);
}
return ret;
}