linux/drivers/scsi/dmx3191d.c
Finn Thain 61e1ce588b scsi: ncr5380: Use correct types for device register accessors
For timeout values adopt unsigned long, which is the type of jiffies etc.

For chip register values and bit masks pass u8, which is the return type
of readb, inb etc.

For device register offsets adopt unsigned int, as it is suitable for
adding to base addresses.

Pass the NCR5380_hostdata pointer to the board-specific routines instead
of the Scsi_Host pointer. The board-specific code is concerned with
hardware and not with SCSI protocol or the mid-layer.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-08 17:29:48 -05:00

172 lines
4.4 KiB
C

/*
dmx3191d.c - driver for the Domex DMX3191D SCSI card.
Copyright (C) 2000 by Massimo Piccioni <dafastidio@libero.it>
Portions Copyright (C) 2004 by Christoph Hellwig <hch@lst.de>
Based on the generic NCR5380 driver by Drew Eckhardt et al.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <scsi/scsi_host.h>
/*
* Definitions for the generic 5380 driver.
*/
#define NCR5380_read(reg) inb(hostdata->base + (reg))
#define NCR5380_write(reg, value) outb(value, hostdata->base + (reg))
#define NCR5380_dma_xfer_len(instance, cmd, phase) (0)
#define NCR5380_dma_recv_setup(instance, dst, len) (0)
#define NCR5380_dma_send_setup(instance, src, len) (0)
#define NCR5380_dma_residual(instance) (0)
#define NCR5380_implementation_fields /* none */
#include "NCR5380.h"
#include "NCR5380.c"
#define DMX3191D_DRIVER_NAME "dmx3191d"
#define DMX3191D_REGION_LEN 8
static struct scsi_host_template dmx3191d_driver_template = {
.module = THIS_MODULE,
.proc_name = DMX3191D_DRIVER_NAME,
.name = "Domex DMX3191D",
.info = NCR5380_info,
.queuecommand = NCR5380_queue_command,
.eh_abort_handler = NCR5380_abort,
.eh_bus_reset_handler = NCR5380_bus_reset,
.can_queue = 32,
.this_id = 7,
.sg_tablesize = SG_ALL,
.cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING,
.cmd_size = NCR5380_CMD_SIZE,
};
static int dmx3191d_probe_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct Scsi_Host *shost;
struct NCR5380_hostdata *hostdata;
unsigned long io;
int error = -ENODEV;
if (pci_enable_device(pdev))
goto out;
io = pci_resource_start(pdev, 0);
if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
io, io + DMX3191D_REGION_LEN);
goto out_disable_device;
}
shost = scsi_host_alloc(&dmx3191d_driver_template,
sizeof(struct NCR5380_hostdata));
if (!shost)
goto out_release_region;
hostdata = shost_priv(shost);
hostdata->base = io;
/* This card does not seem to raise an interrupt on pdev->irq.
* Steam-powered SCSI controllers run without an IRQ anyway.
*/
shost->irq = NO_IRQ;
error = NCR5380_init(shost, 0);
if (error)
goto out_host_put;
NCR5380_maybe_reset_bus(shost);
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
if (error)
goto out_exit;
scsi_scan_host(shost);
return 0;
out_exit:
NCR5380_exit(shost);
out_host_put:
scsi_host_put(shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
pci_disable_device(pdev);
out:
return error;
}
static void dmx3191d_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct NCR5380_hostdata *hostdata = shost_priv(shost);
unsigned long io = hostdata->base;
scsi_remove_host(shost);
NCR5380_exit(shost);
scsi_host_put(shost);
release_region(io, DMX3191D_REGION_LEN);
pci_disable_device(pdev);
}
static struct pci_device_id dmx3191d_pci_tbl[] = {
{PCI_VENDOR_ID_DOMEX, PCI_DEVICE_ID_DOMEX_DMX3191D,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
{ }
};
MODULE_DEVICE_TABLE(pci, dmx3191d_pci_tbl);
static struct pci_driver dmx3191d_pci_driver = {
.name = DMX3191D_DRIVER_NAME,
.id_table = dmx3191d_pci_tbl,
.probe = dmx3191d_probe_one,
.remove = dmx3191d_remove_one,
};
static int __init dmx3191d_init(void)
{
return pci_register_driver(&dmx3191d_pci_driver);
}
static void __exit dmx3191d_exit(void)
{
pci_unregister_driver(&dmx3191d_pci_driver);
}
module_init(dmx3191d_init);
module_exit(dmx3191d_exit);
MODULE_AUTHOR("Massimo Piccioni <dafastidio@libero.it>");
MODULE_DESCRIPTION("Domex DMX3191D SCSI driver");
MODULE_LICENSE("GPL");