korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-12-12 21:44:06 +08:00
Code Issues Packages Projects Releases Wiki Activity
61ca6c7829
linux/drivers/thermal/thermal_core.h
Rafael J. Wysocki f7c1b0e4ae thermal: core: Back off when polling thermal zones on errors 
Commit a8a2617744 ("thermal: core: Call monitor_thermal_zone() if zone
temperature is invalid") introduced a polling mechanism by which the
thermal core attampts to get a valid temperature value for thermal zones
where the .get_temp() callback returns errors to start with (for
example, due to initialization ordering woes).  However, this polling is
carried out periodically ad infinitum and every iteration of it causes
a message to be printed to the kernel log which means a lot of log noise
on systems where there are thermal zones that never get ready for some
reason.  It is also not really useful to continuously poll thermal zones
that never respond.

To address this, modify the thermal core to increase the delay between
consecutive thermal zone temperature checks after every check that fails
until it reaches a certain maximum value.  At that point, the thermal
zone in question will be disabled, but user space will be able to
reenable it if it believes that the failure is transient.

Also change the code to print messages regarding failed temperature
checks to the kernel log only twice, once when the thermal zone's
.get_temp() callback returns an error for the first time and once when
disabling the given thermal zone.  In addition, a dev_crit() message
will be printed at that point if the given thermal zone contains a
critical trip point to notify the system operator about the situation.

Fixes: a8a2617744 ("thermal: core: Call monitor_thermal_zone() if zone temperature is invalid")
Link: https://lore.kernel.org/linux-acpi/CAGnHSE=RyPK++UG0-wAtVKgeJxe0uzFYgLxm+RUOKKoQquW=Ow@mail.gmail.com/
Reported-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2962033.e9J7NaK4W3@rjwysocki.net
2024-07-24 12:40:23 +02:00

296 lines
11 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* thermal_core.h
*
* Copyright (C) 2012 Intel Corp
* Author: Durgadoss R <durgadoss.r@intel.com>
*/
#ifndef __THERMAL_CORE_H__
#define __THERMAL_CORE_H__
#include <linux/device.h>
#include <linux/thermal.h>
#include "thermal_netlink.h"
#include "thermal_debugfs.h"
struct thermal_trip_desc {
struct thermal_trip trip;
struct list_head notify_list_node;
int notify_temp;
int threshold;
};
/**
* struct thermal_governor - structure that holds thermal governor information
* @name: name of the governor
* @bind_to_tz: callback called when binding to a thermal zone. If it
* returns 0, the governor is bound to the thermal zone,
* otherwise it fails.
* @unbind_from_tz: callback called when a governor is unbound from a
* thermal zone.
* @trip_crossed: called for trip points that have just been crossed
* @manage: called on thermal zone temperature updates
* @update_tz: callback called when thermal zone internals have changed, e.g.
* thermal cooling instance was added/removed
* @governor_list: node in thermal_governor_list (in thermal_core.c)
*/
struct thermal_governor {
const char *name;
int (*bind_to_tz)(struct thermal_zone_device *tz);
void (*unbind_from_tz)(struct thermal_zone_device *tz);
void (*trip_crossed)(struct thermal_zone_device *tz,
const struct thermal_trip *trip,
bool crossed_up);
void (*manage)(struct thermal_zone_device *tz);
void (*update_tz)(struct thermal_zone_device *tz,
enum thermal_notify_event reason);
struct list_head governor_list;
};
/**
* struct thermal_zone_device - structure for a thermal zone
* @id: unique id number for each thermal zone
* @type: the thermal zone device type
* @device: &struct device for this thermal zone
* @removal: removal completion
* @resume: resume completion
* @trip_temp_attrs: attributes for trip points for sysfs: trip temperature
* @trip_type_attrs: attributes for trip points for sysfs: trip type
* @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis
* @mode: current mode of this thermal zone
* @devdata: private pointer for device private data
* @num_trips: number of trip points the thermal zone supports
* @passive_delay_jiffies: number of jiffies to wait between polls when
* performing passive cooling.
* @polling_delay_jiffies: number of jiffies to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
* @recheck_delay_jiffies: delay after a failed attempt to determine the zone
* temperature before trying again
* @temperature: current temperature. This is only for core code,
* drivers should use thermal_zone_get_temp() to get the
* current temperature
* @last_temperature: previous temperature read
* @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION
* @passive: 1 if you've crossed a passive trip point, 0 otherwise.
* @prev_low_trip: the low current temperature if you've crossed a passive
trip point.
* @prev_high_trip: the above current temperature if you've crossed a
passive trip point.
* @need_update: if equals 1, thermal_zone_device_update needs to be invoked.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
* @governor: pointer to the governor for this thermal zone
* @governor_data: private pointer for governor data
* @thermal_instances: list of &struct thermal_instance of this thermal zone
* @ida: &struct ida to generate unique id for this zone's cooling
* devices
* @lock: lock to protect thermal_instances list
* @node: node in thermal_tz_list (in thermal_core.c)
* @poll_queue: delayed work for polling
* @notify_event: Last notification event
* @suspended: thermal zone suspend indicator
* @resuming: indicates whether or not thermal zone resume is in progress
* @trips: array of struct thermal_trip objects
*/
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
struct completion removal;
struct completion resume;
struct attribute_group trips_attribute_group;
struct thermal_attr *trip_temp_attrs;
struct thermal_attr *trip_type_attrs;
struct thermal_attr *trip_hyst_attrs;
enum thermal_device_mode mode;
void *devdata;
int num_trips;
unsigned long passive_delay_jiffies;
unsigned long polling_delay_jiffies;
unsigned long recheck_delay_jiffies;
int temperature;
int last_temperature;
int emul_temperature;
int passive;
int prev_low_trip;
int prev_high_trip;
atomic_t need_update;
struct thermal_zone_device_ops ops;
struct thermal_zone_params *tzp;
struct thermal_governor *governor;
void *governor_data;
struct list_head thermal_instances;
struct ida ida;
struct mutex lock;
struct list_head node;
struct delayed_work poll_queue;
enum thermal_notify_event notify_event;
bool suspended;
bool resuming;
#ifdef CONFIG_THERMAL_DEBUGFS
struct thermal_debugfs *debugfs;
#endif
struct thermal_trip_desc trips[] __counted_by(num_trips);
};
/* Initial thermal zone temperature. */
#define THERMAL_TEMP_INIT INT_MIN
/*
* Default and maximum delay after a failed thermal zone temperature check
* before attempting to check it again (in jiffies).
*/
#define THERMAL_RECHECK_DELAY msecs_to_jiffies(250)
#define THERMAL_MAX_RECHECK_DELAY (120 * HZ)
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
#define DEFAULT_THERMAL_GOVERNOR "step_wise"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
#define DEFAULT_THERMAL_GOVERNOR "fair_share"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
#define DEFAULT_THERMAL_GOVERNOR "user_space"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
#define DEFAULT_THERMAL_GOVERNOR "power_allocator"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG)
#define DEFAULT_THERMAL_GOVERNOR "bang_bang"
#endif
/* Initial state of a cooling device during binding */
#define THERMAL_NO_TARGET -1UL
/* Init section thermal table */
extern struct thermal_governor *__governor_thermal_table[];
extern struct thermal_governor *__governor_thermal_table_end[];
#define THERMAL_TABLE_ENTRY(table, name) \
static typeof(name) *__thermal_table_entry_##name \
__used __section("__" #table "_thermal_table") = &name
#define THERMAL_GOVERNOR_DECLARE(name) THERMAL_TABLE_ENTRY(governor, name)
#define for_each_governor_table(__governor) \
for (__governor = __governor_thermal_table; \
__governor < __governor_thermal_table_end; \
__governor++)
int for_each_thermal_zone(int (*cb)(struct thermal_zone_device *, void *),
void *);
int for_each_thermal_cooling_device(int (*cb)(struct thermal_cooling_device *,
void *), void *);
int for_each_thermal_governor(int (*cb)(struct thermal_governor *, void *),
void *thermal_governor);
struct thermal_zone_device *thermal_zone_get_by_id(int id);
struct thermal_attr {
struct device_attribute attr;
char name[THERMAL_NAME_LENGTH];
};
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{
return cdev->ops->get_requested_power && cdev->ops->state2power &&
cdev->ops->power2state;
}
void thermal_cdev_update(struct thermal_cooling_device *);
void __thermal_cdev_update(struct thermal_cooling_device *cdev);
int get_tz_trend(struct thermal_zone_device *tz, const struct thermal_trip *trip);
struct thermal_instance *
get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev,
int trip);
/*
* This structure is used to describe the behavior of
* a certain cooling device on a certain trip point
* in a certain thermal zone
*/
struct thermal_instance {
int id;
char name[THERMAL_NAME_LENGTH];
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
const struct thermal_trip *trip;
bool initialized;
unsigned long upper; /* Highest cooling state for this trip point */
unsigned long lower; /* Lowest cooling state for this trip point */
unsigned long target; /* expected cooling state */
char attr_name[THERMAL_NAME_LENGTH];
struct device_attribute attr;
char weight_attr_name[THERMAL_NAME_LENGTH];
struct device_attribute weight_attr;
struct list_head tz_node; /* node in tz->thermal_instances */
struct list_head cdev_node; /* node in cdev->thermal_instances */
unsigned int weight; /* The weight of the cooling device */
bool upper_no_limit;
};
#define to_thermal_zone(_dev) \
container_of(_dev, struct thermal_zone_device, device)
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
int thermal_register_governor(struct thermal_governor *);
void thermal_unregister_governor(struct thermal_governor *);
int thermal_zone_device_set_policy(struct thermal_zone_device *, char *);
int thermal_build_list_of_policies(char *buf);
void __thermal_zone_device_update(struct thermal_zone_device *tz,
enum thermal_notify_event event);
void thermal_zone_device_critical_reboot(struct thermal_zone_device *tz);
void thermal_governor_update_tz(struct thermal_zone_device *tz,
enum thermal_notify_event reason);
/* Helpers */
#define for_each_trip_desc(__tz, __td) \
for (__td = __tz->trips; __td - __tz->trips < __tz->num_trips; __td++)
#define trip_to_trip_desc(__trip) \
container_of(__trip, struct thermal_trip_desc, trip)
const char *thermal_trip_type_name(enum thermal_trip_type trip_type);
void thermal_zone_set_trips(struct thermal_zone_device *tz);
int thermal_zone_trip_id(const struct thermal_zone_device *tz,
const struct thermal_trip *trip);
void thermal_zone_trip_updated(struct thermal_zone_device *tz,
const struct thermal_trip *trip);
int __thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
void thermal_zone_trip_down(struct thermal_zone_device *tz,
const struct thermal_trip *trip);
/* sysfs I/F */
int thermal_zone_create_device_groups(struct thermal_zone_device *tz);
void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev);
void thermal_cooling_device_stats_reinit(struct thermal_cooling_device *cdev);
/* used only at binding time */
ssize_t trip_point_show(struct device *, struct device_attribute *, char *);
ssize_t weight_show(struct device *, struct device_attribute *, char *);
ssize_t weight_store(struct device *, struct device_attribute *, const char *,
size_t);
#ifdef CONFIG_THERMAL_STATISTICS
void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state);
#else
static inline void
thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
unsigned long new_state) {}
#endif /* CONFIG_THERMAL_STATISTICS */
/* device tree support */
int thermal_zone_device_is_enabled(struct thermal_zone_device *tz);
#endif /* __THERMAL_CORE_H__ */
Reference in New Issue View Git Blame Copy Permalink