mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 16:14:25 +08:00
37448f7d39
This patch replaces current PowerPC 4xx EMAC driver with new, re-written from the scratch version. This patch is quite big (~234K) because there is virtualy 0% of common code between old and new version. New driver uses NAPI, it solves stability problems under heavy packet load and low memory, corrects chip register access and fixes numerous small bugs I don't even remember now. This patch has been tested on all supported in 2.6 PPC 4xx boards. It's been used in production for almost a year now on custom 4xx hardware. PPC32 specific parts are already upstream. Patch was acked by the current EMAC driver maintainer (Matt Porter). I will be maintaining this new version. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> -- Kconfig | 72 ibm_emac/Makefile | 13 ibm_emac/ibm_emac.h | 418 +++-- ibm_emac/ibm_emac_core.c | 3414 ++++++++++++++++++++++++---------------------- ibm_emac/ibm_emac_core.h | 313 ++-- ibm_emac/ibm_emac_debug.c | 377 ++--- ibm_emac/ibm_emac_debug.h | 63 ibm_emac/ibm_emac_mal.c | 674 +++++---- ibm_emac/ibm_emac_mal.h | 336 +++- ibm_emac/ibm_emac_phy.c | 335 ++-- ibm_emac/ibm_emac_phy.h | 105 - ibm_emac/ibm_emac_rgmii.c | 201 ++ ibm_emac/ibm_emac_rgmii.h | 68 ibm_emac/ibm_emac_tah.c | 111 + ibm_emac/ibm_emac_tah.h | 96 - ibm_emac/ibm_emac_zmii.c | 255 +++ ibm_emac/ibm_emac_zmii.h | 114 - 17 files changed, 4114 insertions(+), 2851 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
256 lines
6.5 KiB
C
256 lines
6.5 KiB
C
/*
|
|
* drivers/net/ibm_emac/ibm_emac_zmii.c
|
|
*
|
|
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
|
|
*
|
|
* Copyright (c) 2004, 2005 Zultys Technologies.
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
*
|
|
* Based on original work by
|
|
* Armin Kuster <akuster@mvista.com>
|
|
* Copyright 2001 MontaVista Softare Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ethtool.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "ibm_emac_core.h"
|
|
#include "ibm_emac_debug.h"
|
|
|
|
/* ZMIIx_FER */
|
|
#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
|
|
#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
|
|
ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
|
|
|
|
#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
|
|
#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
|
|
#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
|
|
|
|
/* ZMIIx_SSR */
|
|
#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
|
|
#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
|
|
#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
|
|
|
|
/* ZMII only supports MII, RMII and SMII
|
|
* we also support autodetection for backward compatibility
|
|
*/
|
|
static inline int zmii_valid_mode(int mode)
|
|
{
|
|
return mode == PHY_MODE_MII ||
|
|
mode == PHY_MODE_RMII ||
|
|
mode == PHY_MODE_SMII ||
|
|
mode == PHY_MODE_NA;
|
|
}
|
|
|
|
static inline const char *zmii_mode_name(int mode)
|
|
{
|
|
switch (mode) {
|
|
case PHY_MODE_MII:
|
|
return "MII";
|
|
case PHY_MODE_RMII:
|
|
return "RMII";
|
|
case PHY_MODE_SMII:
|
|
return "SMII";
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline u32 zmii_mode_mask(int mode, int input)
|
|
{
|
|
switch (mode) {
|
|
case PHY_MODE_MII:
|
|
return ZMII_FER_MII(input);
|
|
case PHY_MODE_RMII:
|
|
return ZMII_FER_RMII(input);
|
|
case PHY_MODE_SMII:
|
|
return ZMII_FER_SMII(input);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int __init zmii_init(struct ocp_device *ocpdev, int input, int *mode)
|
|
{
|
|
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
|
|
struct zmii_regs *p;
|
|
|
|
ZMII_DBG("%d: init(%d, %d)" NL, ocpdev->def->index, input, *mode);
|
|
|
|
if (!dev) {
|
|
dev = kzalloc(sizeof(struct ibm_ocp_zmii), GFP_KERNEL);
|
|
if (!dev) {
|
|
printk(KERN_ERR
|
|
"zmii%d: couldn't allocate device structure!\n",
|
|
ocpdev->def->index);
|
|
return -ENOMEM;
|
|
}
|
|
dev->mode = PHY_MODE_NA;
|
|
|
|
p = (struct zmii_regs *)ioremap(ocpdev->def->paddr,
|
|
sizeof(struct zmii_regs));
|
|
if (!p) {
|
|
printk(KERN_ERR
|
|
"zmii%d: could not ioremap device registers!\n",
|
|
ocpdev->def->index);
|
|
kfree(dev);
|
|
return -ENOMEM;
|
|
}
|
|
dev->base = p;
|
|
ocp_set_drvdata(ocpdev, dev);
|
|
|
|
/* We may need FER value for autodetection later */
|
|
dev->fer_save = in_be32(&p->fer);
|
|
|
|
/* Disable all inputs by default */
|
|
out_be32(&p->fer, 0);
|
|
} else
|
|
p = dev->base;
|
|
|
|
if (!zmii_valid_mode(*mode)) {
|
|
/* Probably an EMAC connected to RGMII,
|
|
* but it still may need ZMII for MDIO
|
|
*/
|
|
goto out;
|
|
}
|
|
|
|
/* Autodetect ZMII mode if not specified.
|
|
* This is only for backward compatibility with the old driver.
|
|
* Please, always specify PHY mode in your board port to avoid
|
|
* any surprises.
|
|
*/
|
|
if (dev->mode == PHY_MODE_NA) {
|
|
if (*mode == PHY_MODE_NA) {
|
|
u32 r = dev->fer_save;
|
|
|
|
ZMII_DBG("%d: autodetecting mode, FER = 0x%08x" NL,
|
|
ocpdev->def->index, r);
|
|
|
|
if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
|
|
dev->mode = PHY_MODE_MII;
|
|
else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
|
|
dev->mode = PHY_MODE_RMII;
|
|
else
|
|
dev->mode = PHY_MODE_SMII;
|
|
} else
|
|
dev->mode = *mode;
|
|
|
|
printk(KERN_NOTICE "zmii%d: bridge in %s mode\n",
|
|
ocpdev->def->index, zmii_mode_name(dev->mode));
|
|
} else {
|
|
/* All inputs must use the same mode */
|
|
if (*mode != PHY_MODE_NA && *mode != dev->mode) {
|
|
printk(KERN_ERR
|
|
"zmii%d: invalid mode %d specified for input %d\n",
|
|
ocpdev->def->index, *mode, input);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Report back correct PHY mode,
|
|
* it may be used during PHY initialization.
|
|
*/
|
|
*mode = dev->mode;
|
|
|
|
/* Enable this input */
|
|
out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
|
|
out:
|
|
++dev->users;
|
|
return 0;
|
|
}
|
|
|
|
int __init zmii_attach(void *emac)
|
|
{
|
|
struct ocp_enet_private *dev = emac;
|
|
struct ocp_func_emac_data *emacdata = dev->def->additions;
|
|
|
|
if (emacdata->zmii_idx >= 0) {
|
|
dev->zmii_input = emacdata->zmii_mux;
|
|
dev->zmii_dev =
|
|
ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
|
|
emacdata->zmii_idx);
|
|
if (!dev->zmii_dev) {
|
|
printk(KERN_ERR "emac%d: unknown zmii%d!\n",
|
|
dev->def->index, emacdata->zmii_idx);
|
|
return -ENODEV;
|
|
}
|
|
if (zmii_init
|
|
(dev->zmii_dev, dev->zmii_input, &emacdata->phy_mode)) {
|
|
printk(KERN_ERR
|
|
"emac%d: zmii%d initialization failed!\n",
|
|
dev->def->index, emacdata->zmii_idx);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void __zmii_enable_mdio(struct ocp_device *ocpdev, int input)
|
|
{
|
|
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
|
|
u32 fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
|
|
|
|
ZMII_DBG2("%d: mdio(%d)" NL, ocpdev->def->index, input);
|
|
|
|
out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
|
|
}
|
|
|
|
void __zmii_set_speed(struct ocp_device *ocpdev, int input, int speed)
|
|
{
|
|
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
|
|
u32 ssr = in_be32(&dev->base->ssr);
|
|
|
|
ZMII_DBG("%d: speed(%d, %d)" NL, ocpdev->def->index, input, speed);
|
|
|
|
if (speed == SPEED_100)
|
|
ssr |= ZMII_SSR_SP(input);
|
|
else
|
|
ssr &= ~ZMII_SSR_SP(input);
|
|
|
|
out_be32(&dev->base->ssr, ssr);
|
|
}
|
|
|
|
void __exit __zmii_fini(struct ocp_device *ocpdev, int input)
|
|
{
|
|
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
|
|
BUG_ON(!dev || dev->users == 0);
|
|
|
|
ZMII_DBG("%d: fini(%d)" NL, ocpdev->def->index, input);
|
|
|
|
/* Disable this input */
|
|
out_be32(&dev->base->fer,
|
|
in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
|
|
|
|
if (!--dev->users) {
|
|
/* Free everything if this is the last user */
|
|
ocp_set_drvdata(ocpdev, NULL);
|
|
iounmap((void *)dev->base);
|
|
kfree(dev);
|
|
}
|
|
}
|
|
|
|
int __zmii_get_regs_len(struct ocp_device *ocpdev)
|
|
{
|
|
return sizeof(struct emac_ethtool_regs_subhdr) +
|
|
sizeof(struct zmii_regs);
|
|
}
|
|
|
|
void *zmii_dump_regs(struct ocp_device *ocpdev, void *buf)
|
|
{
|
|
struct ibm_ocp_zmii *dev = ocp_get_drvdata(ocpdev);
|
|
struct emac_ethtool_regs_subhdr *hdr = buf;
|
|
struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
|
|
|
|
hdr->version = 0;
|
|
hdr->index = ocpdev->def->index;
|
|
memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
|
|
return regs + 1;
|
|
}
|