mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-30 06:25:03 +08:00
4abdc6ee7c
On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). Port resets are deferred whenever a device on that port is in the parked state. v3: Elias Oltmanns <eo@nebensachen.de> wrote: [...] > >> 1. Make sure that no negative value is being passed to > >> jiffies_to_msecs() in ide_park_show(). > >> 2. Drop the superfluous variable hwif in ide_special_rq(). > >> 3. Skip initialisation of task and tf in ide_special_rq() if we are not > >> handling a (un)park request. > > > > Well, #3 should have been done differently because we donn't want to > > check for REQ_(UN)?PARK_HEADS more often than is necessary. > > While preparing the backport to 2.6.27, it has just occurred to me that > we need to clear the IDE_DFLAG_PARKED flag in ide_disk_pre_reset() > because this flag must not be set after *any* sort of access to the > device. v4: Fix a memory leak due to a missing blk_put_request() in issue_park_cmd(). Additionally, we should plug the queue when enqueueing the unpark request because there is no guarantee that the park timeout has not expired by then. Even though the chance for that to happen is very slim, the request might end up hanging in the queue until the next I/O operation is queued up. While at it, clean up the code a little: - make issue_park_cmd() a function of type void since nobody cares for the return value anyway; - use blk_start_queueing() instead of __blk_run_queue() since we don't have to worry about recursion; - remove a superfluous pointer deference in task_no_data_intr(). Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Jeff Garzik <jeff@garzik.org>, Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
870 lines
21 KiB
C
870 lines
21 KiB
C
/*
|
|
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
|
|
* Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
|
|
*/
|
|
|
|
/*
|
|
* Mostly written by Mark Lord <mlord@pobox.com>
|
|
* and Gadi Oxman <gadio@netvision.net.il>
|
|
* and Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* See linux/MAINTAINERS for address of current maintainer.
|
|
*
|
|
* This is the multiple IDE interface driver, as evolved from hd.c.
|
|
* It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs
|
|
* (usually 14 & 15).
|
|
* There can be up to two drives per interface, as per the ATA-2 spec.
|
|
*
|
|
* ...
|
|
*
|
|
* From hd.c:
|
|
* |
|
|
* | It traverses the request-list, using interrupts to jump between functions.
|
|
* | As nearly all functions can be called within interrupts, we may not sleep.
|
|
* | Special care is recommended. Have Fun!
|
|
* |
|
|
* | modified by Drew Eckhardt to check nr of hd's from the CMOS.
|
|
* |
|
|
* | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug
|
|
* | in the early extended-partition checks and added DM partitions.
|
|
* |
|
|
* | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI).
|
|
* |
|
|
* | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads",
|
|
* | and general streamlining by Mark Lord (mlord@pobox.com).
|
|
*
|
|
* October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by:
|
|
*
|
|
* Mark Lord (mlord@pobox.com) (IDE Perf.Pkg)
|
|
* Delman Lee (delman@ieee.org) ("Mr. atdisk2")
|
|
* Scott Snyder (snyder@fnald0.fnal.gov) (ATAPI IDE cd-rom)
|
|
*
|
|
* This was a rewrite of just about everything from hd.c, though some original
|
|
* code is still sprinkled about. Think of it as a major evolution, with
|
|
* inspiration from lots of linux users, esp. hamish@zot.apana.org.au
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/major.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/genhd.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/ide.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/device.h>
|
|
|
|
|
|
/* default maximum number of failures */
|
|
#define IDE_DEFAULT_MAX_FAILURES 1
|
|
|
|
struct class *ide_port_class;
|
|
|
|
static const u8 ide_hwif_to_major[] = { IDE0_MAJOR, IDE1_MAJOR,
|
|
IDE2_MAJOR, IDE3_MAJOR,
|
|
IDE4_MAJOR, IDE5_MAJOR,
|
|
IDE6_MAJOR, IDE7_MAJOR,
|
|
IDE8_MAJOR, IDE9_MAJOR };
|
|
|
|
DEFINE_MUTEX(ide_cfg_mtx);
|
|
|
|
__cacheline_aligned_in_smp DEFINE_SPINLOCK(ide_lock);
|
|
EXPORT_SYMBOL(ide_lock);
|
|
|
|
static void ide_port_init_devices_data(ide_hwif_t *);
|
|
|
|
/*
|
|
* Do not even *think* about calling this!
|
|
*/
|
|
void ide_init_port_data(ide_hwif_t *hwif, unsigned int index)
|
|
{
|
|
/* bulk initialize hwif & drive info with zeros */
|
|
memset(hwif, 0, sizeof(ide_hwif_t));
|
|
|
|
/* fill in any non-zero initial values */
|
|
hwif->index = index;
|
|
hwif->major = ide_hwif_to_major[index];
|
|
|
|
hwif->name[0] = 'i';
|
|
hwif->name[1] = 'd';
|
|
hwif->name[2] = 'e';
|
|
hwif->name[3] = '0' + index;
|
|
|
|
init_completion(&hwif->gendev_rel_comp);
|
|
|
|
hwif->tp_ops = &default_tp_ops;
|
|
|
|
ide_port_init_devices_data(hwif);
|
|
}
|
|
|
|
static void ide_port_init_devices_data(ide_hwif_t *hwif)
|
|
{
|
|
int unit;
|
|
|
|
for (unit = 0; unit < MAX_DRIVES; ++unit) {
|
|
ide_drive_t *drive = &hwif->drives[unit];
|
|
u8 j = (hwif->index * MAX_DRIVES) + unit;
|
|
|
|
memset(drive, 0, sizeof(*drive));
|
|
|
|
drive->media = ide_disk;
|
|
drive->select = (unit << 4) | ATA_DEVICE_OBS;
|
|
drive->hwif = hwif;
|
|
drive->ready_stat = ATA_DRDY;
|
|
drive->bad_wstat = BAD_W_STAT;
|
|
drive->special.b.recalibrate = 1;
|
|
drive->special.b.set_geometry = 1;
|
|
drive->name[0] = 'h';
|
|
drive->name[1] = 'd';
|
|
drive->name[2] = 'a' + j;
|
|
drive->max_failures = IDE_DEFAULT_MAX_FAILURES;
|
|
|
|
INIT_LIST_HEAD(&drive->list);
|
|
init_completion(&drive->gendev_rel_comp);
|
|
}
|
|
}
|
|
|
|
/* Called with ide_lock held. */
|
|
static void __ide_port_unregister_devices(ide_hwif_t *hwif)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_DRIVES; i++) {
|
|
ide_drive_t *drive = &hwif->drives[i];
|
|
|
|
if (drive->dev_flags & IDE_DFLAG_PRESENT) {
|
|
spin_unlock_irq(&ide_lock);
|
|
device_unregister(&drive->gendev);
|
|
wait_for_completion(&drive->gendev_rel_comp);
|
|
spin_lock_irq(&ide_lock);
|
|
}
|
|
}
|
|
}
|
|
|
|
void ide_port_unregister_devices(ide_hwif_t *hwif)
|
|
{
|
|
mutex_lock(&ide_cfg_mtx);
|
|
spin_lock_irq(&ide_lock);
|
|
__ide_port_unregister_devices(hwif);
|
|
hwif->present = 0;
|
|
ide_port_init_devices_data(hwif);
|
|
spin_unlock_irq(&ide_lock);
|
|
mutex_unlock(&ide_cfg_mtx);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_port_unregister_devices);
|
|
|
|
/**
|
|
* ide_unregister - free an IDE interface
|
|
* @hwif: IDE interface
|
|
*
|
|
* Perform the final unregister of an IDE interface. At the moment
|
|
* we don't refcount interfaces so this will also get split up.
|
|
*
|
|
* Locking:
|
|
* The caller must not hold the IDE locks
|
|
* The drive present/vanishing is not yet properly locked
|
|
* Take care with the callbacks. These have been split to avoid
|
|
* deadlocking the IDE layer. The shutdown callback is called
|
|
* before we take the lock and free resources. It is up to the
|
|
* caller to be sure there is no pending I/O here, and that
|
|
* the interface will not be reopened (present/vanishing locking
|
|
* isn't yet done BTW). After we commit to the final kill we
|
|
* call the cleanup callback with the ide locks held.
|
|
*
|
|
* Unregister restores the hwif structures to the default state.
|
|
* This is raving bonkers.
|
|
*/
|
|
|
|
void ide_unregister(ide_hwif_t *hwif)
|
|
{
|
|
ide_hwif_t *g;
|
|
ide_hwgroup_t *hwgroup;
|
|
int irq_count = 0;
|
|
|
|
BUG_ON(in_interrupt());
|
|
BUG_ON(irqs_disabled());
|
|
|
|
mutex_lock(&ide_cfg_mtx);
|
|
|
|
spin_lock_irq(&ide_lock);
|
|
if (hwif->present) {
|
|
__ide_port_unregister_devices(hwif);
|
|
hwif->present = 0;
|
|
}
|
|
spin_unlock_irq(&ide_lock);
|
|
|
|
ide_proc_unregister_port(hwif);
|
|
|
|
hwgroup = hwif->hwgroup;
|
|
/*
|
|
* free the irq if we were the only hwif using it
|
|
*/
|
|
g = hwgroup->hwif;
|
|
do {
|
|
if (g->irq == hwif->irq)
|
|
++irq_count;
|
|
g = g->next;
|
|
} while (g != hwgroup->hwif);
|
|
if (irq_count == 1)
|
|
free_irq(hwif->irq, hwgroup);
|
|
|
|
ide_remove_port_from_hwgroup(hwif);
|
|
|
|
device_unregister(hwif->portdev);
|
|
device_unregister(&hwif->gendev);
|
|
wait_for_completion(&hwif->gendev_rel_comp);
|
|
|
|
/*
|
|
* Remove us from the kernel's knowledge
|
|
*/
|
|
blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<<PARTN_BITS);
|
|
kfree(hwif->sg_table);
|
|
unregister_blkdev(hwif->major, hwif->name);
|
|
|
|
ide_release_dma_engine(hwif);
|
|
|
|
mutex_unlock(&ide_cfg_mtx);
|
|
}
|
|
|
|
void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
|
|
{
|
|
memcpy(&hwif->io_ports, &hw->io_ports, sizeof(hwif->io_ports));
|
|
hwif->irq = hw->irq;
|
|
hwif->chipset = hw->chipset;
|
|
hwif->dev = hw->dev;
|
|
hwif->gendev.parent = hw->parent ? hw->parent : hw->dev;
|
|
hwif->ack_intr = hw->ack_intr;
|
|
hwif->config_data = hw->config;
|
|
}
|
|
|
|
/*
|
|
* Locks for IDE setting functionality
|
|
*/
|
|
|
|
DEFINE_MUTEX(ide_setting_mtx);
|
|
|
|
ide_devset_get(io_32bit, io_32bit);
|
|
|
|
static int set_io_32bit(ide_drive_t *drive, int arg)
|
|
{
|
|
if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT)
|
|
return -EPERM;
|
|
|
|
if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
|
|
return -EINVAL;
|
|
|
|
drive->io_32bit = arg;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS);
|
|
|
|
static int set_ksettings(ide_drive_t *drive, int arg)
|
|
{
|
|
if (arg < 0 || arg > 1)
|
|
return -EINVAL;
|
|
|
|
if (arg)
|
|
drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS;
|
|
else
|
|
drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA);
|
|
|
|
static int set_using_dma(ide_drive_t *drive, int arg)
|
|
{
|
|
#ifdef CONFIG_BLK_DEV_IDEDMA
|
|
int err = -EPERM;
|
|
|
|
if (arg < 0 || arg > 1)
|
|
return -EINVAL;
|
|
|
|
if (ata_id_has_dma(drive->id) == 0)
|
|
goto out;
|
|
|
|
if (drive->hwif->dma_ops == NULL)
|
|
goto out;
|
|
|
|
err = 0;
|
|
|
|
if (arg) {
|
|
if (ide_set_dma(drive))
|
|
err = -EIO;
|
|
} else
|
|
ide_dma_off(drive);
|
|
|
|
out:
|
|
return err;
|
|
#else
|
|
if (arg < 0 || arg > 1)
|
|
return -EINVAL;
|
|
|
|
return -EPERM;
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
|
|
*/
|
|
static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
|
|
{
|
|
switch (req_pio) {
|
|
case 202:
|
|
case 201:
|
|
case 200:
|
|
case 102:
|
|
case 101:
|
|
case 100:
|
|
return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
|
|
case 9:
|
|
case 8:
|
|
return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
|
|
case 7:
|
|
case 6:
|
|
return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int set_pio_mode(ide_drive_t *drive, int arg)
|
|
{
|
|
ide_hwif_t *hwif = drive->hwif;
|
|
const struct ide_port_ops *port_ops = hwif->port_ops;
|
|
|
|
if (arg < 0 || arg > 255)
|
|
return -EINVAL;
|
|
|
|
if (port_ops == NULL || port_ops->set_pio_mode == NULL ||
|
|
(hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
|
|
return -ENOSYS;
|
|
|
|
if (set_pio_mode_abuse(drive->hwif, arg)) {
|
|
if (arg == 8 || arg == 9) {
|
|
unsigned long flags;
|
|
|
|
/* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
|
|
spin_lock_irqsave(&ide_lock, flags);
|
|
port_ops->set_pio_mode(drive, arg);
|
|
spin_unlock_irqrestore(&ide_lock, flags);
|
|
} else
|
|
port_ops->set_pio_mode(drive, arg);
|
|
} else {
|
|
int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
|
|
|
|
ide_set_pio(drive, arg);
|
|
|
|
if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
|
|
if (keep_dma)
|
|
ide_dma_on(drive);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK);
|
|
|
|
static int set_unmaskirq(ide_drive_t *drive, int arg)
|
|
{
|
|
if (drive->dev_flags & IDE_DFLAG_NO_UNMASK)
|
|
return -EPERM;
|
|
|
|
if (arg < 0 || arg > 1)
|
|
return -EINVAL;
|
|
|
|
if (arg)
|
|
drive->dev_flags |= IDE_DFLAG_UNMASK;
|
|
else
|
|
drive->dev_flags &= ~IDE_DFLAG_UNMASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ide_ext_devset_rw_sync(io_32bit, io_32bit);
|
|
ide_ext_devset_rw_sync(keepsettings, ksettings);
|
|
ide_ext_devset_rw_sync(unmaskirq, unmaskirq);
|
|
ide_ext_devset_rw_sync(using_dma, using_dma);
|
|
__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode);
|
|
|
|
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
|
|
{
|
|
ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct request *rq;
|
|
struct request_pm_state rqpm;
|
|
ide_task_t args;
|
|
int ret;
|
|
|
|
/* call ACPI _GTM only once */
|
|
if ((drive->dn & 1) == 0 || pair == NULL)
|
|
ide_acpi_get_timing(hwif);
|
|
|
|
memset(&rqpm, 0, sizeof(rqpm));
|
|
memset(&args, 0, sizeof(args));
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_PM_SUSPEND;
|
|
rq->special = &args;
|
|
rq->data = &rqpm;
|
|
rqpm.pm_step = IDE_PM_START_SUSPEND;
|
|
if (mesg.event == PM_EVENT_PRETHAW)
|
|
mesg.event = PM_EVENT_FREEZE;
|
|
rqpm.pm_state = mesg.event;
|
|
|
|
ret = blk_execute_rq(drive->queue, NULL, rq, 0);
|
|
blk_put_request(rq);
|
|
|
|
/* call ACPI _PS3 only after both devices are suspended */
|
|
if (ret == 0 && ((drive->dn & 1) || pair == NULL))
|
|
ide_acpi_set_state(hwif, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int generic_ide_resume(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct request *rq;
|
|
struct request_pm_state rqpm;
|
|
ide_task_t args;
|
|
int err;
|
|
|
|
/* call ACPI _PS0 / _STM only once */
|
|
if ((drive->dn & 1) == 0 || pair == NULL) {
|
|
ide_acpi_set_state(hwif, 1);
|
|
ide_acpi_push_timing(hwif);
|
|
}
|
|
|
|
ide_acpi_exec_tfs(drive);
|
|
|
|
memset(&rqpm, 0, sizeof(rqpm));
|
|
memset(&args, 0, sizeof(args));
|
|
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
|
|
rq->cmd_type = REQ_TYPE_PM_RESUME;
|
|
rq->cmd_flags |= REQ_PREEMPT;
|
|
rq->special = &args;
|
|
rq->data = &rqpm;
|
|
rqpm.pm_step = IDE_PM_START_RESUME;
|
|
rqpm.pm_state = PM_EVENT_ON;
|
|
|
|
err = blk_execute_rq(drive->queue, NULL, rq, 1);
|
|
blk_put_request(rq);
|
|
|
|
if (err == 0 && dev->driver) {
|
|
ide_driver_t *drv = to_ide_driver(dev->driver);
|
|
|
|
if (drv->resume)
|
|
drv->resume(drive);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ide_device_get - get an additional reference to a ide_drive_t
|
|
* @drive: device to get a reference to
|
|
*
|
|
* Gets a reference to the ide_drive_t and increments the use count of the
|
|
* underlying LLDD module.
|
|
*/
|
|
int ide_device_get(ide_drive_t *drive)
|
|
{
|
|
struct device *host_dev;
|
|
struct module *module;
|
|
|
|
if (!get_device(&drive->gendev))
|
|
return -ENXIO;
|
|
|
|
host_dev = drive->hwif->host->dev[0];
|
|
module = host_dev ? host_dev->driver->owner : NULL;
|
|
|
|
if (module && !try_module_get(module)) {
|
|
put_device(&drive->gendev);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_device_get);
|
|
|
|
/**
|
|
* ide_device_put - release a reference to a ide_drive_t
|
|
* @drive: device to release a reference on
|
|
*
|
|
* Release a reference to the ide_drive_t and decrements the use count of
|
|
* the underlying LLDD module.
|
|
*/
|
|
void ide_device_put(ide_drive_t *drive)
|
|
{
|
|
#ifdef CONFIG_MODULE_UNLOAD
|
|
struct device *host_dev = drive->hwif->host->dev[0];
|
|
struct module *module = host_dev ? host_dev->driver->owner : NULL;
|
|
|
|
if (module)
|
|
module_put(module);
|
|
#endif
|
|
put_device(&drive->gendev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(ide_device_put);
|
|
|
|
static int ide_bus_match(struct device *dev, struct device_driver *drv)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static char *media_string(ide_drive_t *drive)
|
|
{
|
|
switch (drive->media) {
|
|
case ide_disk:
|
|
return "disk";
|
|
case ide_cdrom:
|
|
return "cdrom";
|
|
case ide_tape:
|
|
return "tape";
|
|
case ide_floppy:
|
|
return "floppy";
|
|
case ide_optical:
|
|
return "optical";
|
|
default:
|
|
return "UNKNOWN";
|
|
}
|
|
}
|
|
|
|
static ssize_t media_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
return sprintf(buf, "%s\n", media_string(drive));
|
|
}
|
|
|
|
static ssize_t drivename_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
return sprintf(buf, "%s\n", drive->name);
|
|
}
|
|
|
|
static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
return sprintf(buf, "ide:m-%s\n", media_string(drive));
|
|
}
|
|
|
|
static ssize_t model_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_PROD]);
|
|
}
|
|
|
|
static ssize_t firmware_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_FW_REV]);
|
|
}
|
|
|
|
static ssize_t serial_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
return sprintf(buf, "%s\n", (char *)&drive->id[ATA_ID_SERNO]);
|
|
}
|
|
|
|
static struct device_attribute ide_dev_attrs[] = {
|
|
__ATTR_RO(media),
|
|
__ATTR_RO(drivename),
|
|
__ATTR_RO(modalias),
|
|
__ATTR_RO(model),
|
|
__ATTR_RO(firmware),
|
|
__ATTR(serial, 0400, serial_show, NULL),
|
|
__ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
|
|
__ATTR_NULL
|
|
};
|
|
|
|
static int ide_uevent(struct device *dev, struct kobj_uevent_env *env)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
|
|
add_uevent_var(env, "MEDIA=%s", media_string(drive));
|
|
add_uevent_var(env, "DRIVENAME=%s", drive->name);
|
|
add_uevent_var(env, "MODALIAS=ide:m-%s", media_string(drive));
|
|
return 0;
|
|
}
|
|
|
|
static int generic_ide_probe(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
ide_driver_t *drv = to_ide_driver(dev->driver);
|
|
|
|
return drv->probe ? drv->probe(drive) : -ENODEV;
|
|
}
|
|
|
|
static int generic_ide_remove(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
ide_driver_t *drv = to_ide_driver(dev->driver);
|
|
|
|
if (drv->remove)
|
|
drv->remove(drive);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void generic_ide_shutdown(struct device *dev)
|
|
{
|
|
ide_drive_t *drive = to_ide_device(dev);
|
|
ide_driver_t *drv = to_ide_driver(dev->driver);
|
|
|
|
if (dev->driver && drv->shutdown)
|
|
drv->shutdown(drive);
|
|
}
|
|
|
|
struct bus_type ide_bus_type = {
|
|
.name = "ide",
|
|
.match = ide_bus_match,
|
|
.uevent = ide_uevent,
|
|
.probe = generic_ide_probe,
|
|
.remove = generic_ide_remove,
|
|
.shutdown = generic_ide_shutdown,
|
|
.dev_attrs = ide_dev_attrs,
|
|
.suspend = generic_ide_suspend,
|
|
.resume = generic_ide_resume,
|
|
};
|
|
|
|
EXPORT_SYMBOL_GPL(ide_bus_type);
|
|
|
|
int ide_vlb_clk;
|
|
EXPORT_SYMBOL_GPL(ide_vlb_clk);
|
|
|
|
module_param_named(vlb_clock, ide_vlb_clk, int, 0);
|
|
MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)");
|
|
|
|
int ide_pci_clk;
|
|
EXPORT_SYMBOL_GPL(ide_pci_clk);
|
|
|
|
module_param_named(pci_clock, ide_pci_clk, int, 0);
|
|
MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)");
|
|
|
|
static int ide_set_dev_param_mask(const char *s, struct kernel_param *kp)
|
|
{
|
|
int a, b, i, j = 1;
|
|
unsigned int *dev_param_mask = (unsigned int *)kp->arg;
|
|
|
|
if (sscanf(s, "%d.%d:%d", &a, &b, &j) != 3 &&
|
|
sscanf(s, "%d.%d", &a, &b) != 2)
|
|
return -EINVAL;
|
|
|
|
i = a * MAX_DRIVES + b;
|
|
|
|
if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
|
|
return -EINVAL;
|
|
|
|
if (j)
|
|
*dev_param_mask |= (1 << i);
|
|
else
|
|
*dev_param_mask &= (1 << i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ide_nodma;
|
|
|
|
module_param_call(nodma, ide_set_dev_param_mask, NULL, &ide_nodma, 0);
|
|
MODULE_PARM_DESC(nodma, "disallow DMA for a device");
|
|
|
|
static unsigned int ide_noflush;
|
|
|
|
module_param_call(noflush, ide_set_dev_param_mask, NULL, &ide_noflush, 0);
|
|
MODULE_PARM_DESC(noflush, "disable flush requests for a device");
|
|
|
|
static unsigned int ide_noprobe;
|
|
|
|
module_param_call(noprobe, ide_set_dev_param_mask, NULL, &ide_noprobe, 0);
|
|
MODULE_PARM_DESC(noprobe, "skip probing for a device");
|
|
|
|
static unsigned int ide_nowerr;
|
|
|
|
module_param_call(nowerr, ide_set_dev_param_mask, NULL, &ide_nowerr, 0);
|
|
MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device");
|
|
|
|
static unsigned int ide_cdroms;
|
|
|
|
module_param_call(cdrom, ide_set_dev_param_mask, NULL, &ide_cdroms, 0);
|
|
MODULE_PARM_DESC(cdrom, "force device as a CD-ROM");
|
|
|
|
struct chs_geom {
|
|
unsigned int cyl;
|
|
u8 head;
|
|
u8 sect;
|
|
};
|
|
|
|
static unsigned int ide_disks;
|
|
static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES];
|
|
|
|
static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
|
|
{
|
|
int a, b, c = 0, h = 0, s = 0, i, j = 1;
|
|
|
|
if (sscanf(str, "%d.%d:%d,%d,%d", &a, &b, &c, &h, &s) != 5 &&
|
|
sscanf(str, "%d.%d:%d", &a, &b, &j) != 3)
|
|
return -EINVAL;
|
|
|
|
i = a * MAX_DRIVES + b;
|
|
|
|
if (i >= MAX_HWIFS * MAX_DRIVES || j < 0 || j > 1)
|
|
return -EINVAL;
|
|
|
|
if (c > INT_MAX || h > 255 || s > 255)
|
|
return -EINVAL;
|
|
|
|
if (j)
|
|
ide_disks |= (1 << i);
|
|
else
|
|
ide_disks &= (1 << i);
|
|
|
|
ide_disks_chs[i].cyl = c;
|
|
ide_disks_chs[i].head = h;
|
|
ide_disks_chs[i].sect = s;
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
|
|
MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");
|
|
|
|
static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
|
|
{
|
|
int i = drive->hwif->index * MAX_DRIVES + unit;
|
|
|
|
if (ide_nodma & (1 << i)) {
|
|
printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
|
|
drive->dev_flags |= IDE_DFLAG_NODMA;
|
|
}
|
|
if (ide_noflush & (1 << i)) {
|
|
printk(KERN_INFO "ide: disabling flush requests for %s\n",
|
|
drive->name);
|
|
drive->dev_flags |= IDE_DFLAG_NOFLUSH;
|
|
}
|
|
if (ide_noprobe & (1 << i)) {
|
|
printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
|
|
drive->dev_flags |= IDE_DFLAG_NOPROBE;
|
|
}
|
|
if (ide_nowerr & (1 << i)) {
|
|
printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
|
|
drive->name);
|
|
drive->bad_wstat = BAD_R_STAT;
|
|
}
|
|
if (ide_cdroms & (1 << i)) {
|
|
printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
|
|
drive->dev_flags |= IDE_DFLAG_PRESENT;
|
|
drive->media = ide_cdrom;
|
|
/* an ATAPI device ignores DRDY */
|
|
drive->ready_stat = 0;
|
|
}
|
|
if (ide_disks & (1 << i)) {
|
|
drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl;
|
|
drive->head = drive->bios_head = ide_disks_chs[i].head;
|
|
drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
|
|
|
|
printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
|
|
drive->name,
|
|
drive->cyl, drive->head, drive->sect);
|
|
|
|
drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
|
|
drive->media = ide_disk;
|
|
drive->ready_stat = ATA_DRDY;
|
|
}
|
|
}
|
|
|
|
static unsigned int ide_ignore_cable;
|
|
|
|
static int ide_set_ignore_cable(const char *s, struct kernel_param *kp)
|
|
{
|
|
int i, j = 1;
|
|
|
|
if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1)
|
|
return -EINVAL;
|
|
|
|
if (i >= MAX_HWIFS || j < 0 || j > 1)
|
|
return -EINVAL;
|
|
|
|
if (j)
|
|
ide_ignore_cable |= (1 << i);
|
|
else
|
|
ide_ignore_cable &= (1 << i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0);
|
|
MODULE_PARM_DESC(ignore_cable, "ignore cable detection");
|
|
|
|
void ide_port_apply_params(ide_hwif_t *hwif)
|
|
{
|
|
int i;
|
|
|
|
if (ide_ignore_cable & (1 << hwif->index)) {
|
|
printk(KERN_INFO "ide: ignoring cable detection for %s\n",
|
|
hwif->name);
|
|
hwif->cbl = ATA_CBL_PATA40_SHORT;
|
|
}
|
|
|
|
for (i = 0; i < MAX_DRIVES; i++)
|
|
ide_dev_apply_params(&hwif->drives[i], i);
|
|
}
|
|
|
|
/*
|
|
* This is gets invoked once during initialization, to set *everything* up
|
|
*/
|
|
static int __init ide_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n");
|
|
|
|
ret = bus_register(&ide_bus_type);
|
|
if (ret < 0) {
|
|
printk(KERN_WARNING "IDE: bus_register error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ide_port_class = class_create(THIS_MODULE, "ide_port");
|
|
if (IS_ERR(ide_port_class)) {
|
|
ret = PTR_ERR(ide_port_class);
|
|
goto out_port_class;
|
|
}
|
|
|
|
proc_ide_create();
|
|
|
|
return 0;
|
|
|
|
out_port_class:
|
|
bus_unregister(&ide_bus_type);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit ide_exit(void)
|
|
{
|
|
proc_ide_destroy();
|
|
|
|
class_destroy(ide_port_class);
|
|
|
|
bus_unregister(&ide_bus_type);
|
|
}
|
|
|
|
module_init(ide_init);
|
|
module_exit(ide_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|