mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
6048a3dd23
This change introduces a driver for the HTC PLD chip found on some smartphones, such as the HTC Wizard and HTC Herald. It works through the I2C bus and acts as a GPIO extender. Specifically: * it can have several sub-devices, each with its own I2C address * Each sub-device provides 8 output and 8 input pins * The chip attaches to one GPIO to signal when any of the input GPIOs change -- at which point all chips must be scanned for changes This driver implements the GPIOs throught the kernel's GPIO and IRQ framework. This allows any GPIO-servicing drivers to operate on htcpld pins, such as the gpio-keys and gpio-leds drivers. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
64 lines
2.0 KiB
Makefile
64 lines
2.0 KiB
Makefile
#
|
|
# Makefile for multifunction miscellaneous devices
|
|
#
|
|
|
|
88pm860x-objs := 88pm860x-core.o 88pm860x-i2c.o
|
|
obj-$(CONFIG_MFD_88PM860X) += 88pm860x.o
|
|
obj-$(CONFIG_MFD_SM501) += sm501.o
|
|
obj-$(CONFIG_MFD_ASIC3) += asic3.o tmio_core.o
|
|
obj-$(CONFIG_MFD_SH_MOBILE_SDHI) += sh_mobile_sdhi.o
|
|
|
|
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
|
|
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
|
|
obj-$(CONFIG_HTC_I2CPLD) += htc-i2cpld.o
|
|
|
|
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
|
|
|
|
obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o tmio_core.o
|
|
obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o tmio_core.o
|
|
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o tmio_core.o
|
|
|
|
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
|
|
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
|
|
obj-$(CONFIG_MFD_WM831X) += wm831x.o
|
|
wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
|
|
wm8350-objs += wm8350-irq.o
|
|
obj-$(CONFIG_MFD_WM8350) += wm8350.o
|
|
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
|
|
|
|
obj-$(CONFIG_TPS65010) += tps65010.o
|
|
obj-$(CONFIG_MENELAUS) += menelaus.o
|
|
|
|
obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o
|
|
obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o
|
|
obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o
|
|
|
|
obj-$(CONFIG_MFD_MC13783) += mc13783-core.o
|
|
|
|
obj-$(CONFIG_MFD_CORE) += mfd-core.o
|
|
|
|
obj-$(CONFIG_EZX_PCAP) += ezx-pcap.o
|
|
|
|
obj-$(CONFIG_MCP) += mcp-core.o
|
|
obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o
|
|
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o
|
|
obj-$(CONFIG_MCP_UCB1200_TS) += ucb1x00-ts.o
|
|
|
|
ifeq ($(CONFIG_SA1100_ASSABET),y)
|
|
obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
|
|
endif
|
|
obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
|
|
|
|
obj-$(CONFIG_PMIC_DA903X) += da903x.o
|
|
max8925-objs := max8925-core.o max8925-i2c.o
|
|
obj-$(CONFIG_MFD_MAX8925) += max8925.o
|
|
|
|
obj-$(CONFIG_MFD_PCF50633) += pcf50633-core.o
|
|
obj-$(CONFIG_PCF50633_ADC) += pcf50633-adc.o
|
|
obj-$(CONFIG_PCF50633_GPIO) += pcf50633-gpio.o
|
|
obj-$(CONFIG_AB3100_CORE) += ab3100-core.o
|
|
obj-$(CONFIG_AB3100_OTP) += ab3100-otp.o
|
|
obj-$(CONFIG_AB4500_CORE) += ab4500-core.o
|
|
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
|
|
obj-$(CONFIG_PMIC_ADP5520) += adp5520.o
|