Krzysztof Kozlowski 5f67317bd9 arm64: dts: imx8mm: correct interrupt flags ... GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH In case of level low interrupts, enable also internal pull up. It is required at least on imx8mm-evk, according to schematics. The schematics for Variscite imx8mm-var-som are not available and I was unable to get proper configuration from Variscite. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-By: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>		2020-09-22 17:06:04 +08:00
..
dts	arm64: dts: imx8mm: correct interrupt flags	2020-09-22 17:06:04 +08:00
.gitignore	.gitignore: add SPDX License Identifier	2020-03-25 11:50:48 +01:00
install.sh
Makefile	arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'	2020-01-21 16:28:36 +00:00