linux/arch/arm/mach-omap2/Kconfig
Felipe Balbi 54011103fb ARM: OMAP2+: AM43xx: select ARM TWD timer
Make sure to tell the kernel that AM437x devices have ARM TWD timer.

Signed-off-by: Felipe Balbi <balbi@ti.com>
[grygorii.strashko@ti.com: drop ARM Global timer selection, because
 it's incompatible with PM (cpuidle/cpufreq). So, it's unsafe to enable
 it unconditionally]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-12-17 10:54:13 -08:00

244 lines
5.0 KiB
Plaintext

menu "TI OMAP/AM/DM/DRA Family"
depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM if CPU_IDLE
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP4
bool "TI OMAP4"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_720789
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PL310_ERRATA_588369 if CACHE_L2X0
select PL310_ERRATA_727915 if CACHE_L2X0
select PM_OPP if PM
select PM if CPU_IDLE
select ARM_ERRATA_754322
select ARM_ERRATA_775420
config SOC_OMAP5
bool "TI OMAP5"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
select ZONE_DMA if ARM_LPAE
config SOC_AM33XX
bool "TI AM33XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_GIC
select MACH_OMAP_GENERIC
select MIGHT_HAVE_CACHE_L2X0
select HAVE_ARM_SCU
select GENERIC_CLOCKEVENTS_BROADCAST
select HAVE_ARM_TWD
config SOC_DRA7XX
bool "TI DRA7XX"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
select ARM_ERRATA_798181 if SMP
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
select ZONE_DMA if ARM_LPAE
config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select MACH_OMAP_GENERIC
select MEMORY
select MFD_SYSCON
select OMAP_DM_TIMER
select OMAP_GPMC
select PINCTRL
select SOC_BUS
select OMAP_IRQCHIP
select CLKSRC_TI_32K
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
config OMAP_INTERCONNECT_BARRIER
bool
select ARM_HEAVY_MB
if ARCH_OMAP2PLUS
menu "TI OMAP2/3/4 Specific Features"
config ARCH_OMAP2PLUS_TYPICAL
bool "Typical OMAP configuration"
default y
select AEABI
select HIGHMEM
select I2C
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if CPU_V7
select PM
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
select VFP
help
Compile a kernel suitable for booting most boards
config SOC_HAS_OMAP2_SDRC
bool "OMAP2 SDRAM Controller support"
config SOC_HAS_REALTIME_COUNTER
bool "Real time free running counter"
depends on SOC_OMAP5 || SOC_DRA7XX
default y
comment "OMAP Core Type"
depends on ARCH_OMAP2
config SOC_OMAP2420
bool "OMAP2420 support"
depends on ARCH_OMAP2
default y
select OMAP_DM_TIMER
select SOC_HAS_OMAP2_SDRC
config SOC_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP2
default y
select SOC_HAS_OMAP2_SDRC
config SOC_OMAP3430
bool "OMAP3430 support"
depends on ARCH_OMAP3
default y
select SOC_HAS_OMAP2_SDRC
config SOC_TI81XX
bool "TI81XX support"
depends on ARCH_OMAP3
default y
config OMAP_PACKAGE_CBC
bool
config OMAP_PACKAGE_CBB
bool
config OMAP_PACKAGE_CUS
bool
config OMAP_PACKAGE_CBP
bool
comment "OMAP Legacy Platform Data Board Type"
depends on ARCH_OMAP2PLUS
config MACH_OMAP_GENERIC
bool
config MACH_OMAP2_TUSB6010
bool
depends on ARCH_OMAP2 && SOC_OMAP2420
default y if MACH_NOKIA_N8X0
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
config MACH_OMAP3517EVM
bool "OMAP3517/ AM3517 EVM board"
depends on ARCH_OMAP3
default y
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
config MACH_NOKIA_N810
bool
config MACH_NOKIA_N810_WIMAX
bool
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on SOC_OMAP2420
default y
select MACH_NOKIA_N810
select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RX51
bool "Nokia N900 (RX-51) phone"
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
config OMAP3_SDRC_AC_TIMING
bool "Enable SDRC AC timing register changes"
depends on ARCH_OMAP3
default n
help
If you know that none of your system initiators will attempt to
access SDRAM during CORE DVFS, select Y here. This should boost
SDRAM performance at lower CORE OPPs. There are relatively few
users who will wish to say yes at this point - almost everyone will
wish to say no. Selecting yes without understanding what is
going on could result in system crashes;
endmenu
endif
endmenu