mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-17 07:54:54 +08:00
fe402bd090
Boards with some of the 32-bit SoCs (mostly Meson8 and Meson8m2) use a Ricoh RN5T618 PMU which acts as system power controller. The driver for the system power controller may need to the I2C bus just before shutting down or rebooting the system. At this stage the interrupts may be disabled already. Implement the master_xfer_atomic callback so the driver for the RN5T618 PMU can communicate properly with the PMU when shutting down or rebooting the board. The CTRL register has a status bit which can be polled to determine when processing has completed. According to the public S805 datasheet the value 0 means "idle" and 1 means "running". Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [wsa: converted some whitespace alignment] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
518 lines
12 KiB
C
518 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* I2C bus driver for Amlogic Meson SoCs
|
|
*
|
|
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
|
|
/* Meson I2C register map */
|
|
#define REG_CTRL 0x00
|
|
#define REG_SLAVE_ADDR 0x04
|
|
#define REG_TOK_LIST0 0x08
|
|
#define REG_TOK_LIST1 0x0c
|
|
#define REG_TOK_WDATA0 0x10
|
|
#define REG_TOK_WDATA1 0x14
|
|
#define REG_TOK_RDATA0 0x18
|
|
#define REG_TOK_RDATA1 0x1c
|
|
|
|
/* Control register fields */
|
|
#define REG_CTRL_START BIT(0)
|
|
#define REG_CTRL_ACK_IGNORE BIT(1)
|
|
#define REG_CTRL_STATUS BIT(2)
|
|
#define REG_CTRL_ERROR BIT(3)
|
|
#define REG_CTRL_CLKDIV_SHIFT 12
|
|
#define REG_CTRL_CLKDIV_MASK GENMASK(21, 12)
|
|
#define REG_CTRL_CLKDIVEXT_SHIFT 28
|
|
#define REG_CTRL_CLKDIVEXT_MASK GENMASK(29, 28)
|
|
|
|
#define I2C_TIMEOUT_MS 500
|
|
|
|
enum {
|
|
TOKEN_END = 0,
|
|
TOKEN_START,
|
|
TOKEN_SLAVE_ADDR_WRITE,
|
|
TOKEN_SLAVE_ADDR_READ,
|
|
TOKEN_DATA,
|
|
TOKEN_DATA_LAST,
|
|
TOKEN_STOP,
|
|
};
|
|
|
|
enum {
|
|
STATE_IDLE,
|
|
STATE_READ,
|
|
STATE_WRITE,
|
|
};
|
|
|
|
struct meson_i2c_data {
|
|
unsigned char div_factor;
|
|
};
|
|
|
|
/**
|
|
* struct meson_i2c - Meson I2C device private data
|
|
*
|
|
* @adap: I2C adapter instance
|
|
* @dev: Pointer to device structure
|
|
* @regs: Base address of the device memory mapped registers
|
|
* @clk: Pointer to clock structure
|
|
* @msg: Pointer to the current I2C message
|
|
* @state: Current state in the driver state machine
|
|
* @last: Flag set for the last message in the transfer
|
|
* @count: Number of bytes to be sent/received in current transfer
|
|
* @pos: Current position in the send/receive buffer
|
|
* @error: Flag set when an error is received
|
|
* @lock: To avoid race conditions between irq handler and xfer code
|
|
* @done: Completion used to wait for transfer termination
|
|
* @tokens: Sequence of tokens to be written to the device
|
|
* @num_tokens: Number of tokens
|
|
* @data: Pointer to the controlller's platform data
|
|
*/
|
|
struct meson_i2c {
|
|
struct i2c_adapter adap;
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
|
|
struct i2c_msg *msg;
|
|
int state;
|
|
bool last;
|
|
int count;
|
|
int pos;
|
|
int error;
|
|
|
|
spinlock_t lock;
|
|
struct completion done;
|
|
u32 tokens[2];
|
|
int num_tokens;
|
|
|
|
const struct meson_i2c_data *data;
|
|
};
|
|
|
|
static void meson_i2c_set_mask(struct meson_i2c *i2c, int reg, u32 mask,
|
|
u32 val)
|
|
{
|
|
u32 data;
|
|
|
|
data = readl(i2c->regs + reg);
|
|
data &= ~mask;
|
|
data |= val & mask;
|
|
writel(data, i2c->regs + reg);
|
|
}
|
|
|
|
static void meson_i2c_reset_tokens(struct meson_i2c *i2c)
|
|
{
|
|
i2c->tokens[0] = 0;
|
|
i2c->tokens[1] = 0;
|
|
i2c->num_tokens = 0;
|
|
}
|
|
|
|
static void meson_i2c_add_token(struct meson_i2c *i2c, int token)
|
|
{
|
|
if (i2c->num_tokens < 8)
|
|
i2c->tokens[0] |= (token & 0xf) << (i2c->num_tokens * 4);
|
|
else
|
|
i2c->tokens[1] |= (token & 0xf) << ((i2c->num_tokens % 8) * 4);
|
|
|
|
i2c->num_tokens++;
|
|
}
|
|
|
|
static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
|
|
{
|
|
unsigned long clk_rate = clk_get_rate(i2c->clk);
|
|
unsigned int div;
|
|
|
|
div = DIV_ROUND_UP(clk_rate, freq * i2c->data->div_factor);
|
|
|
|
/* clock divider has 12 bits */
|
|
if (div >= (1 << 12)) {
|
|
dev_err(i2c->dev, "requested bus frequency too low\n");
|
|
div = (1 << 12) - 1;
|
|
}
|
|
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
|
|
(div & GENMASK(9, 0)) << REG_CTRL_CLKDIV_SHIFT);
|
|
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
|
|
(div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT);
|
|
|
|
dev_dbg(i2c->dev, "%s: clk %lu, freq %u, div %u\n", __func__,
|
|
clk_rate, freq, div);
|
|
}
|
|
|
|
static void meson_i2c_get_data(struct meson_i2c *i2c, char *buf, int len)
|
|
{
|
|
u32 rdata0, rdata1;
|
|
int i;
|
|
|
|
rdata0 = readl(i2c->regs + REG_TOK_RDATA0);
|
|
rdata1 = readl(i2c->regs + REG_TOK_RDATA1);
|
|
|
|
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
|
|
rdata0, rdata1, len);
|
|
|
|
for (i = 0; i < min(4, len); i++)
|
|
*buf++ = (rdata0 >> i * 8) & 0xff;
|
|
|
|
for (i = 4; i < min(8, len); i++)
|
|
*buf++ = (rdata1 >> (i - 4) * 8) & 0xff;
|
|
}
|
|
|
|
static void meson_i2c_put_data(struct meson_i2c *i2c, char *buf, int len)
|
|
{
|
|
u32 wdata0 = 0, wdata1 = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < min(4, len); i++)
|
|
wdata0 |= *buf++ << (i * 8);
|
|
|
|
for (i = 4; i < min(8, len); i++)
|
|
wdata1 |= *buf++ << ((i - 4) * 8);
|
|
|
|
writel(wdata0, i2c->regs + REG_TOK_WDATA0);
|
|
writel(wdata1, i2c->regs + REG_TOK_WDATA1);
|
|
|
|
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
|
|
wdata0, wdata1, len);
|
|
}
|
|
|
|
static void meson_i2c_prepare_xfer(struct meson_i2c *i2c)
|
|
{
|
|
bool write = !(i2c->msg->flags & I2C_M_RD);
|
|
int i;
|
|
|
|
i2c->count = min(i2c->msg->len - i2c->pos, 8);
|
|
|
|
for (i = 0; i < i2c->count - 1; i++)
|
|
meson_i2c_add_token(i2c, TOKEN_DATA);
|
|
|
|
if (i2c->count) {
|
|
if (write || i2c->pos + i2c->count < i2c->msg->len)
|
|
meson_i2c_add_token(i2c, TOKEN_DATA);
|
|
else
|
|
meson_i2c_add_token(i2c, TOKEN_DATA_LAST);
|
|
}
|
|
|
|
if (write)
|
|
meson_i2c_put_data(i2c, i2c->msg->buf + i2c->pos, i2c->count);
|
|
|
|
if (i2c->last && i2c->pos + i2c->count >= i2c->msg->len)
|
|
meson_i2c_add_token(i2c, TOKEN_STOP);
|
|
|
|
writel(i2c->tokens[0], i2c->regs + REG_TOK_LIST0);
|
|
writel(i2c->tokens[1], i2c->regs + REG_TOK_LIST1);
|
|
}
|
|
|
|
static void meson_i2c_transfer_complete(struct meson_i2c *i2c, u32 ctrl)
|
|
{
|
|
if (ctrl & REG_CTRL_ERROR) {
|
|
/*
|
|
* The bit is set when the IGNORE_NAK bit is cleared
|
|
* and the device didn't respond. In this case, the
|
|
* I2C controller automatically generates a STOP
|
|
* condition.
|
|
*/
|
|
dev_dbg(i2c->dev, "error bit set\n");
|
|
i2c->error = -ENXIO;
|
|
i2c->state = STATE_IDLE;
|
|
} else {
|
|
if (i2c->state == STATE_READ && i2c->count)
|
|
meson_i2c_get_data(i2c, i2c->msg->buf + i2c->pos,
|
|
i2c->count);
|
|
|
|
i2c->pos += i2c->count;
|
|
|
|
if (i2c->pos >= i2c->msg->len)
|
|
i2c->state = STATE_IDLE;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t meson_i2c_irq(int irqno, void *dev_id)
|
|
{
|
|
struct meson_i2c *i2c = dev_id;
|
|
unsigned int ctrl;
|
|
|
|
spin_lock(&i2c->lock);
|
|
|
|
meson_i2c_reset_tokens(i2c);
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
|
ctrl = readl(i2c->regs + REG_CTRL);
|
|
|
|
dev_dbg(i2c->dev, "irq: state %d, pos %d, count %d, ctrl %08x\n",
|
|
i2c->state, i2c->pos, i2c->count, ctrl);
|
|
|
|
if (i2c->state == STATE_IDLE) {
|
|
spin_unlock(&i2c->lock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
meson_i2c_transfer_complete(i2c, ctrl);
|
|
|
|
if (i2c->state == STATE_IDLE) {
|
|
complete(&i2c->done);
|
|
goto out;
|
|
}
|
|
|
|
/* Restart the processing */
|
|
meson_i2c_prepare_xfer(i2c);
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
|
|
out:
|
|
spin_unlock(&i2c->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
|
|
{
|
|
int token;
|
|
|
|
token = (msg->flags & I2C_M_RD) ? TOKEN_SLAVE_ADDR_READ :
|
|
TOKEN_SLAVE_ADDR_WRITE;
|
|
|
|
writel(msg->addr << 1, i2c->regs + REG_SLAVE_ADDR);
|
|
meson_i2c_add_token(i2c, TOKEN_START);
|
|
meson_i2c_add_token(i2c, token);
|
|
}
|
|
|
|
static int meson_i2c_xfer_msg(struct meson_i2c *i2c, struct i2c_msg *msg,
|
|
int last, bool atomic)
|
|
{
|
|
unsigned long time_left, flags;
|
|
int ret = 0;
|
|
u32 ctrl;
|
|
|
|
i2c->msg = msg;
|
|
i2c->last = last;
|
|
i2c->pos = 0;
|
|
i2c->count = 0;
|
|
i2c->error = 0;
|
|
|
|
meson_i2c_reset_tokens(i2c);
|
|
|
|
flags = (msg->flags & I2C_M_IGNORE_NAK) ? REG_CTRL_ACK_IGNORE : 0;
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_ACK_IGNORE, flags);
|
|
|
|
if (!(msg->flags & I2C_M_NOSTART))
|
|
meson_i2c_do_start(i2c, msg);
|
|
|
|
i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
|
|
meson_i2c_prepare_xfer(i2c);
|
|
|
|
if (!atomic)
|
|
reinit_completion(&i2c->done);
|
|
|
|
/* Start the transfer */
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, REG_CTRL_START);
|
|
|
|
if (atomic) {
|
|
ret = readl_poll_timeout_atomic(i2c->regs + REG_CTRL, ctrl,
|
|
!(ctrl & REG_CTRL_STATUS),
|
|
10, I2C_TIMEOUT_MS * 1000);
|
|
} else {
|
|
time_left = msecs_to_jiffies(I2C_TIMEOUT_MS);
|
|
time_left = wait_for_completion_timeout(&i2c->done, time_left);
|
|
|
|
if (!time_left)
|
|
ret = -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* Protect access to i2c struct and registers from interrupt
|
|
* handlers triggered by a transfer terminated after the
|
|
* timeout period
|
|
*/
|
|
spin_lock_irqsave(&i2c->lock, flags);
|
|
|
|
if (atomic && !ret)
|
|
meson_i2c_transfer_complete(i2c, ctrl);
|
|
|
|
/* Abort any active operation */
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
|
|
|
if (ret)
|
|
i2c->state = STATE_IDLE;
|
|
|
|
if (i2c->error)
|
|
ret = i2c->error;
|
|
|
|
spin_unlock_irqrestore(&i2c->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int meson_i2c_xfer_messages(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num, bool atomic)
|
|
{
|
|
struct meson_i2c *i2c = adap->algo_data;
|
|
int i, ret = 0;
|
|
|
|
clk_enable(i2c->clk);
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = meson_i2c_xfer_msg(i2c, msgs + i, i == num - 1, atomic);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
clk_disable(i2c->clk);
|
|
|
|
return ret ?: i;
|
|
}
|
|
|
|
static int meson_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
return meson_i2c_xfer_messages(adap, msgs, num, false);
|
|
}
|
|
|
|
static int meson_i2c_xfer_atomic(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
return meson_i2c_xfer_messages(adap, msgs, num, true);
|
|
}
|
|
|
|
static u32 meson_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm meson_i2c_algorithm = {
|
|
.master_xfer = meson_i2c_xfer,
|
|
.master_xfer_atomic = meson_i2c_xfer_atomic,
|
|
.functionality = meson_i2c_func,
|
|
};
|
|
|
|
static int meson_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct meson_i2c *i2c;
|
|
struct resource *mem;
|
|
struct i2c_timings timings;
|
|
int irq, ret = 0;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(struct meson_i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
i2c_parse_fw_timings(&pdev->dev, &timings, true);
|
|
|
|
i2c->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
spin_lock_init(&i2c->lock);
|
|
init_completion(&i2c->done);
|
|
|
|
i2c->data = (const struct meson_i2c_data *)
|
|
of_device_get_match_data(&pdev->dev);
|
|
|
|
i2c->clk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(i2c->clk)) {
|
|
dev_err(&pdev->dev, "can't get device clock\n");
|
|
return PTR_ERR(i2c->clk);
|
|
}
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(i2c->regs))
|
|
return PTR_ERR(i2c->regs);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "can't find IRQ\n");
|
|
return irq;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, meson_i2c_irq, 0, NULL, i2c);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "can't request IRQ\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare(i2c->clk);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "can't prepare clock\n");
|
|
return ret;
|
|
}
|
|
|
|
strlcpy(i2c->adap.name, "Meson I2C adapter",
|
|
sizeof(i2c->adap.name));
|
|
i2c->adap.owner = THIS_MODULE;
|
|
i2c->adap.algo = &meson_i2c_algorithm;
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
i2c->adap.dev.of_node = np;
|
|
i2c->adap.algo_data = i2c;
|
|
|
|
/*
|
|
* A transfer is triggered when START bit changes from 0 to 1.
|
|
* Ensure that the bit is set to 0 after probe
|
|
*/
|
|
meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_START, 0);
|
|
|
|
ret = i2c_add_adapter(&i2c->adap);
|
|
if (ret < 0) {
|
|
clk_unprepare(i2c->clk);
|
|
return ret;
|
|
}
|
|
|
|
meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct meson_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
clk_unprepare(i2c->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct meson_i2c_data i2c_meson6_data = {
|
|
.div_factor = 4,
|
|
};
|
|
|
|
static const struct meson_i2c_data i2c_gxbb_data = {
|
|
.div_factor = 4,
|
|
};
|
|
|
|
static const struct meson_i2c_data i2c_axg_data = {
|
|
.div_factor = 3,
|
|
};
|
|
|
|
static const struct of_device_id meson_i2c_match[] = {
|
|
{ .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data },
|
|
{ .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data },
|
|
{ .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data },
|
|
{},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, meson_i2c_match);
|
|
|
|
static struct platform_driver meson_i2c_driver = {
|
|
.probe = meson_i2c_probe,
|
|
.remove = meson_i2c_remove,
|
|
.driver = {
|
|
.name = "meson-i2c",
|
|
.of_match_table = meson_i2c_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(meson_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Amlogic Meson I2C Bus driver");
|
|
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|