mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 09:44:18 +08:00
aa1996e201
When PIPEMIX=1, change the operation from 2x8 EP to 1x8 EP + 1x8 RC. Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
306 lines
7.4 KiB
C
306 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2016-2018 Broadcom
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
/* we have up to 8 PAXB based RC. The 9th one is always PAXC */
|
|
#define SR_NR_PCIE_PHYS 9
|
|
#define SR_PAXC_PHY_IDX (SR_NR_PCIE_PHYS - 1)
|
|
|
|
#define PCIE_PIPEMUX_CFG_OFFSET 0x10c
|
|
#define PCIE_PIPEMUX_SELECT_STRAP 0xf
|
|
|
|
#define CDRU_STRAP_DATA_LSW_OFFSET 0x5c
|
|
#define PCIE_PIPEMUX_SHIFT 19
|
|
#define PCIE_PIPEMUX_MASK 0xf
|
|
|
|
#define MHB_MEM_PW_PAXC_OFFSET 0x1c0
|
|
#define MHB_PWR_ARR_POWERON 0x8
|
|
#define MHB_PWR_ARR_POWEROK 0x4
|
|
#define MHB_PWR_POWERON 0x2
|
|
#define MHB_PWR_POWEROK 0x1
|
|
#define MHB_PWR_STATUS_MASK (MHB_PWR_ARR_POWERON | \
|
|
MHB_PWR_ARR_POWEROK | \
|
|
MHB_PWR_POWERON | \
|
|
MHB_PWR_POWEROK)
|
|
|
|
struct sr_pcie_phy_core;
|
|
|
|
/**
|
|
* struct sr_pcie_phy - Stingray PCIe PHY
|
|
*
|
|
* @core: pointer to the Stingray PCIe PHY core control
|
|
* @index: PHY index
|
|
* @phy: pointer to the kernel PHY device
|
|
*/
|
|
struct sr_pcie_phy {
|
|
struct sr_pcie_phy_core *core;
|
|
unsigned int index;
|
|
struct phy *phy;
|
|
};
|
|
|
|
/**
|
|
* struct sr_pcie_phy_core - Stingray PCIe PHY core control
|
|
*
|
|
* @dev: pointer to device
|
|
* @base: base register of PCIe SS
|
|
* @cdru: regmap to the CDRU device
|
|
* @mhb: regmap to the MHB device
|
|
* @pipemux: pipemuex strap
|
|
* @phys: array of PCIe PHYs
|
|
*/
|
|
struct sr_pcie_phy_core {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct regmap *cdru;
|
|
struct regmap *mhb;
|
|
u32 pipemux;
|
|
struct sr_pcie_phy phys[SR_NR_PCIE_PHYS];
|
|
};
|
|
|
|
/*
|
|
* PCIe PIPEMUX lookup table
|
|
*
|
|
* Each array index represents a PIPEMUX strap setting
|
|
* The array element represents a bitmap where a set bit means the PCIe
|
|
* core and associated serdes has been enabled as RC and is available for use
|
|
*/
|
|
static const u8 pipemux_table[] = {
|
|
/* PIPEMUX = 0, EP 1x16 */
|
|
0x00,
|
|
/* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
|
|
0x80,
|
|
/* PIPEMUX = 2, EP 4x4 */
|
|
0x00,
|
|
/* PIPEMUX = 3, RC 2x8, cores 0, 7 */
|
|
0x81,
|
|
/* PIPEMUX = 4, RC 4x4, cores 0, 1, 6, 7 */
|
|
0xc3,
|
|
/* PIPEMUX = 5, RC 8x2, all 8 cores */
|
|
0xff,
|
|
/* PIPEMUX = 6, RC 3x4 + 2x2, cores 0, 2, 3, 6, 7 */
|
|
0xcd,
|
|
/* PIPEMUX = 7, RC 1x4 + 6x2, cores 0, 2, 3, 4, 5, 6, 7 */
|
|
0xfd,
|
|
/* PIPEMUX = 8, EP 1x8 + RC 4x2, cores 4, 5, 6, 7 */
|
|
0xf0,
|
|
/* PIPEMUX = 9, EP 1x8 + RC 2x4, cores 6, 7 */
|
|
0xc0,
|
|
/* PIPEMUX = 10, EP 2x4 + RC 2x4, cores 1, 6 */
|
|
0x42,
|
|
/* PIPEMUX = 11, EP 2x4 + RC 4x2, cores 2, 3, 4, 5 */
|
|
0x3c,
|
|
/* PIPEMUX = 12, EP 1x4 + RC 6x2, cores 2, 3, 4, 5, 6, 7 */
|
|
0xfc,
|
|
/* PIPEMUX = 13, RC 2x4 + RC 1x4 + 2x2, cores 2, 3, 6 */
|
|
0x4c,
|
|
};
|
|
|
|
/*
|
|
* Return true if the strap setting is valid
|
|
*/
|
|
static bool pipemux_strap_is_valid(u32 pipemux)
|
|
{
|
|
return !!(pipemux < ARRAY_SIZE(pipemux_table));
|
|
}
|
|
|
|
/*
|
|
* Read the PCIe PIPEMUX from strap
|
|
*/
|
|
static u32 pipemux_strap_read(struct sr_pcie_phy_core *core)
|
|
{
|
|
u32 pipemux;
|
|
|
|
/*
|
|
* Read PIPEMUX configuration register to determine the pipemux setting
|
|
*
|
|
* In the case when the value indicates using HW strap, fall back to
|
|
* use HW strap
|
|
*/
|
|
pipemux = readl(core->base + PCIE_PIPEMUX_CFG_OFFSET);
|
|
pipemux &= PCIE_PIPEMUX_MASK;
|
|
if (pipemux == PCIE_PIPEMUX_SELECT_STRAP) {
|
|
regmap_read(core->cdru, CDRU_STRAP_DATA_LSW_OFFSET, &pipemux);
|
|
pipemux >>= PCIE_PIPEMUX_SHIFT;
|
|
pipemux &= PCIE_PIPEMUX_MASK;
|
|
}
|
|
|
|
return pipemux;
|
|
}
|
|
|
|
/*
|
|
* Given a PIPEMUX strap and PCIe core index, this function returns true if the
|
|
* PCIe core needs to be enabled
|
|
*/
|
|
static bool pcie_core_is_for_rc(struct sr_pcie_phy *phy)
|
|
{
|
|
struct sr_pcie_phy_core *core = phy->core;
|
|
unsigned int core_idx = phy->index;
|
|
|
|
return !!((pipemux_table[core->pipemux] >> core_idx) & 0x1);
|
|
}
|
|
|
|
static int sr_pcie_phy_init(struct phy *p)
|
|
{
|
|
struct sr_pcie_phy *phy = phy_get_drvdata(p);
|
|
|
|
/*
|
|
* Check whether this PHY is for root complex or not. If yes, return
|
|
* zero so the host driver can proceed to enumeration. If not, return
|
|
* an error and that will force the host driver to bail out
|
|
*/
|
|
if (pcie_core_is_for_rc(phy))
|
|
return 0;
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int sr_paxc_phy_init(struct phy *p)
|
|
{
|
|
struct sr_pcie_phy *phy = phy_get_drvdata(p);
|
|
struct sr_pcie_phy_core *core = phy->core;
|
|
unsigned int core_idx = phy->index;
|
|
u32 val;
|
|
|
|
if (core_idx != SR_PAXC_PHY_IDX)
|
|
return -EINVAL;
|
|
|
|
regmap_read(core->mhb, MHB_MEM_PW_PAXC_OFFSET, &val);
|
|
if ((val & MHB_PWR_STATUS_MASK) != MHB_PWR_STATUS_MASK) {
|
|
dev_err(core->dev, "PAXC is not powered up\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops sr_pcie_phy_ops = {
|
|
.init = sr_pcie_phy_init,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct phy_ops sr_paxc_phy_ops = {
|
|
.init = sr_paxc_phy_init,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *sr_pcie_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct sr_pcie_phy_core *core;
|
|
int phy_idx;
|
|
|
|
core = dev_get_drvdata(dev);
|
|
if (!core)
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
phy_idx = args->args[0];
|
|
|
|
if (WARN_ON(phy_idx >= SR_NR_PCIE_PHYS))
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
return core->phys[phy_idx].phy;
|
|
}
|
|
|
|
static int sr_pcie_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *node = dev->of_node;
|
|
struct sr_pcie_phy_core *core;
|
|
struct resource *res;
|
|
struct phy_provider *provider;
|
|
unsigned int phy_idx = 0;
|
|
|
|
core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
|
|
if (!core)
|
|
return -ENOMEM;
|
|
|
|
core->dev = dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
core->base = devm_ioremap_resource(core->dev, res);
|
|
if (IS_ERR(core->base))
|
|
return PTR_ERR(core->base);
|
|
|
|
core->cdru = syscon_regmap_lookup_by_phandle(node, "brcm,sr-cdru");
|
|
if (IS_ERR(core->cdru)) {
|
|
dev_err(core->dev, "unable to find CDRU device\n");
|
|
return PTR_ERR(core->cdru);
|
|
}
|
|
|
|
core->mhb = syscon_regmap_lookup_by_phandle(node, "brcm,sr-mhb");
|
|
if (IS_ERR(core->mhb)) {
|
|
dev_err(core->dev, "unable to find MHB device\n");
|
|
return PTR_ERR(core->mhb);
|
|
}
|
|
|
|
/* read the PCIe PIPEMUX strap setting */
|
|
core->pipemux = pipemux_strap_read(core);
|
|
if (!pipemux_strap_is_valid(core->pipemux)) {
|
|
dev_err(core->dev, "invalid PCIe PIPEMUX strap %u\n",
|
|
core->pipemux);
|
|
return -EIO;
|
|
}
|
|
|
|
for (phy_idx = 0; phy_idx < SR_NR_PCIE_PHYS; phy_idx++) {
|
|
struct sr_pcie_phy *p = &core->phys[phy_idx];
|
|
const struct phy_ops *ops;
|
|
|
|
if (phy_idx == SR_PAXC_PHY_IDX)
|
|
ops = &sr_paxc_phy_ops;
|
|
else
|
|
ops = &sr_pcie_phy_ops;
|
|
|
|
p->phy = devm_phy_create(dev, NULL, ops);
|
|
if (IS_ERR(p->phy)) {
|
|
dev_err(dev, "failed to create PCIe PHY\n");
|
|
return PTR_ERR(p->phy);
|
|
}
|
|
|
|
p->core = core;
|
|
p->index = phy_idx;
|
|
phy_set_drvdata(p->phy, p);
|
|
}
|
|
|
|
dev_set_drvdata(dev, core);
|
|
|
|
provider = devm_of_phy_provider_register(dev, sr_pcie_phy_xlate);
|
|
if (IS_ERR(provider)) {
|
|
dev_err(dev, "failed to register PHY provider\n");
|
|
return PTR_ERR(provider);
|
|
}
|
|
|
|
dev_info(dev, "Stingray PCIe PHY driver initialized\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sr_pcie_phy_match_table[] = {
|
|
{ .compatible = "brcm,sr-pcie-phy" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sr_pcie_phy_match_table);
|
|
|
|
static struct platform_driver sr_pcie_phy_driver = {
|
|
.driver = {
|
|
.name = "sr-pcie-phy",
|
|
.of_match_table = sr_pcie_phy_match_table,
|
|
},
|
|
.probe = sr_pcie_phy_probe,
|
|
};
|
|
module_platform_driver(sr_pcie_phy_driver);
|
|
|
|
MODULE_AUTHOR("Ray Jui <ray.jui@broadcom.com>");
|
|
MODULE_DESCRIPTION("Broadcom Stingray PCIe PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|