korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-30 07:34:12 +08:00
Code Issues Packages Projects Releases Wiki Activity
5ec942463b
linux/arch/arm/mach-omap2/omap_twl.c
Tony Lindgren a613b739b8 mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree 
I noticed a regression where the omap sys_clkreq signal will never
trigger for omap3 when booted with device tree while it triggers
when booted in legacy mode. This means voltage scaling does not
do anything when booted with device tree.

Turns out the reason is we fail to initialize the SmartReflex
enable bit in twl4030 with the following error:

twl: not initialized

And that happens because we are wrongly tinkering with the twl4030
registers in arch/arm/mach-omap2/omap_twl.c before the driver is
initialized. Looking at the the SmartReflex bit enable code in
omap_twl.c, we need to always set it.

So let's fix the issue by always enabling the twl4030 SmartReflex
bit in the drivers/mfd/twl-core.c probe, and drop the related
code in omap_twl.c.

Note that we still have some twl4030 tinkering left in omap_twl.c
for the twl6030 case, but that's a different patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23 15:31:05 +01:00

255 lines
6.9 KiB
C
Raw Blame History

/**
* OMAP and TWL PMIC specific intializations.
*
* Copyright (C) 2010 Texas Instruments Incorporated.
* Thara Gopinath
* Copyright (C) 2009 Texas Instruments Incorporated.
* Nishanth Menon
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/i2c/twl.h>
#include "soc.h"
#include "voltage.h"
#include "pm.h"
#define OMAP3_SRI2C_SLAVE_ADDR 0x12
#define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00
#define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01
#define OMAP3_VP_CONFIG_ERROROFFSET 0x00
#define OMAP3_VP_VSTEPMIN_VSTEPMIN 0x1
#define OMAP3_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP3_VP_VLIMITTO_TIMEOUT_US 200
#define OMAP4_SRI2C_SLAVE_ADDR 0x12
#define OMAP4_VDD_MPU_SR_VOLT_REG 0x55
#define OMAP4_VDD_MPU_SR_CMD_REG 0x56
#define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B
#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C
#define OMAP4_VDD_CORE_SR_VOLT_REG 0x61
#define OMAP4_VDD_CORE_SR_CMD_REG 0x62
#define OMAP4_VP_CONFIG_ERROROFFSET 0x00
#define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01
#define OMAP4_VP_VSTEPMAX_VSTEPMAX 0x04
#define OMAP4_VP_VLIMITTO_TIMEOUT_US 200
static bool is_offset_valid;
static u8 smps_offset;
#define REG_SMPS_OFFSET 0xE0
static unsigned long twl4030_vsel_to_uv(const u8 vsel)
{
return (((vsel * 125) + 6000)) * 100;
}
static u8 twl4030_uv_to_vsel(unsigned long uv)
{
return DIV_ROUND_UP(uv - 600000, 12500);
}
static unsigned long twl6030_vsel_to_uv(const u8 vsel)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
if (!vsel)
return 0;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (vsel == 0x3A)
return 1350000;
if (smps_offset & 0x8)
return ((((vsel - 1) * 1266) + 70900)) * 10;
else
return ((((vsel - 1) * 1266) + 60770)) * 10;
}
static u8 twl6030_uv_to_vsel(unsigned long uv)
{
/*
* In TWL6030 depending on the value of SMPS_OFFSET
* efuse register the voltage range supported in
* standard mode can be either between 0.6V - 1.3V or
* 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
* is programmed to all 0's where as starting from
* TWL6030 ES1.1 the efuse is programmed to 1
*/
if (!is_offset_valid) {
twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
REG_SMPS_OFFSET);
is_offset_valid = true;
}
if (!uv)
return 0x00;
/*
* There is no specific formula for voltage to vsel
* conversion above 1.3V. There are special hardcoded
* values for voltages above 1.3V. Currently we are
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
if (uv > twl6030_vsel_to_uv(0x39)) {
if (uv == 1350000)
return 0x3A;
pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
__func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
}
if (smps_offset & 0x8)
return DIV_ROUND_UP(uv - 709000, 12660) + 1;
else
return DIV_ROUND_UP(uv - 607700, 12660) + 1;
}
static struct omap_voltdm_pmic omap3_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 600000,
.vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG,
.i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap3_core_pmic = {
.slew_rate = 4000,
.step_size = 12500,
.vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 600000,
.vddmax = 1450000,
.vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG,
.i2c_high_speed = true,
.vsel_to_uv = twl4030_vsel_to_uv,
.uv_to_vsel = twl4030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap4_mpu_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap4_iva_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
static struct omap_voltdm_pmic omap4_core_pmic = {
.slew_rate = 4000,
.step_size = 12660,
.vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
.vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
.vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
.vddmin = 0,
.vddmax = 2100000,
.vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US,
.i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR,
.volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG,
.cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG,
.i2c_high_speed = true,
.i2c_pad_load = 3,
.vsel_to_uv = twl6030_vsel_to_uv,
.uv_to_vsel = twl6030_uv_to_vsel,
};
int __init omap4_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap44xx())
return -ENODEV;
voltdm = voltdm_lookup("mpu");
omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic);
voltdm = voltdm_lookup("iva");
omap_voltage_register_pmic(voltdm, &omap4_iva_pmic);
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap4_core_pmic);
return 0;
}
int __init omap3_twl_init(void)
{
struct voltagedomain *voltdm;
if (!cpu_is_omap34xx())
return -ENODEV;
voltdm = voltdm_lookup("mpu_iva");
omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic);
voltdm = voltdm_lookup("core");
omap_voltage_register_pmic(voltdm, &omap3_core_pmic);
return 0;
}
Reference in New Issue View Git Blame Copy Permalink