linux/fs/proc/meminfo.c
Andrei Vagin d1be35cb6f proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps
seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a
specified minimal field width.

It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it
works much faster.

== test_smaps.py
  num = 0
  with open("/proc/1/smaps") as f:
          for x in xrange(10000):
                  data = f.read()
                  f.seek(0, 0)
==

== Before patch ==
  $ time python test_smaps.py
  real    0m4.593s
  user    0m0.398s
  sys     0m4.158s

== After patch ==
  $ time python test_smaps.py
  real    0m3.828s
  user    0m0.413s
  sys     0m3.408s

$ perf -g record python test_smaps.py
== Before patch ==
-   79.01%     3.36%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 75.65% show_smap.isra.33
      + 48.85% seq_printf
      + 15.75% __walk_page_range
      + 9.70% show_map_vma.isra.23
        0.61% seq_puts

== After patch ==
-   75.51%     4.62%  python   [kernel.kallsyms]    [k] show_smap.isra.33
   - 70.88% show_smap.isra.33
      + 24.82% seq_put_decimal_ull_w
      + 19.78% __walk_page_range
      + 12.74% seq_printf
      + 11.08% show_map_vma.isra.23
      + 1.68% seq_puts

[akpm@linux-foundation.org: fix drivers/of/unittest.c build]
Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.org
Signed-off-by: Andrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 10:28:33 -07:00

170 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/mman.h>
#include <linux/mmzone.h>
#include <linux/proc_fs.h>
#include <linux/quicklist.h>
#include <linux/seq_file.h>
#include <linux/swap.h>
#include <linux/vmstat.h>
#include <linux/atomic.h>
#include <linux/vmalloc.h>
#ifdef CONFIG_CMA
#include <linux/cma.h>
#endif
#include <asm/page.h>
#include <asm/pgtable.h>
#include "internal.h"
void __attribute__((weak)) arch_report_meminfo(struct seq_file *m)
{
}
static void show_val_kb(struct seq_file *m, const char *s, unsigned long num)
{
seq_put_decimal_ull_width(m, s, num << (PAGE_SHIFT - 10), 8);
seq_write(m, " kB\n", 4);
}
static int meminfo_proc_show(struct seq_file *m, void *v)
{
struct sysinfo i;
unsigned long committed;
long cached;
long available;
unsigned long pages[NR_LRU_LISTS];
int lru;
si_meminfo(&i);
si_swapinfo(&i);
committed = percpu_counter_read_positive(&vm_committed_as);
cached = global_node_page_state(NR_FILE_PAGES) -
total_swapcache_pages() - i.bufferram;
if (cached < 0)
cached = 0;
for (lru = LRU_BASE; lru < NR_LRU_LISTS; lru++)
pages[lru] = global_node_page_state(NR_LRU_BASE + lru);
available = si_mem_available();
show_val_kb(m, "MemTotal: ", i.totalram);
show_val_kb(m, "MemFree: ", i.freeram);
show_val_kb(m, "MemAvailable: ", available);
show_val_kb(m, "Buffers: ", i.bufferram);
show_val_kb(m, "Cached: ", cached);
show_val_kb(m, "SwapCached: ", total_swapcache_pages());
show_val_kb(m, "Active: ", pages[LRU_ACTIVE_ANON] +
pages[LRU_ACTIVE_FILE]);
show_val_kb(m, "Inactive: ", pages[LRU_INACTIVE_ANON] +
pages[LRU_INACTIVE_FILE]);
show_val_kb(m, "Active(anon): ", pages[LRU_ACTIVE_ANON]);
show_val_kb(m, "Inactive(anon): ", pages[LRU_INACTIVE_ANON]);
show_val_kb(m, "Active(file): ", pages[LRU_ACTIVE_FILE]);
show_val_kb(m, "Inactive(file): ", pages[LRU_INACTIVE_FILE]);
show_val_kb(m, "Unevictable: ", pages[LRU_UNEVICTABLE]);
show_val_kb(m, "Mlocked: ", global_zone_page_state(NR_MLOCK));
#ifdef CONFIG_HIGHMEM
show_val_kb(m, "HighTotal: ", i.totalhigh);
show_val_kb(m, "HighFree: ", i.freehigh);
show_val_kb(m, "LowTotal: ", i.totalram - i.totalhigh);
show_val_kb(m, "LowFree: ", i.freeram - i.freehigh);
#endif
#ifndef CONFIG_MMU
show_val_kb(m, "MmapCopy: ",
(unsigned long)atomic_long_read(&mmap_pages_allocated));
#endif
show_val_kb(m, "SwapTotal: ", i.totalswap);
show_val_kb(m, "SwapFree: ", i.freeswap);
show_val_kb(m, "Dirty: ",
global_node_page_state(NR_FILE_DIRTY));
show_val_kb(m, "Writeback: ",
global_node_page_state(NR_WRITEBACK));
show_val_kb(m, "AnonPages: ",
global_node_page_state(NR_ANON_MAPPED));
show_val_kb(m, "Mapped: ",
global_node_page_state(NR_FILE_MAPPED));
show_val_kb(m, "Shmem: ", i.sharedram);
show_val_kb(m, "Slab: ",
global_node_page_state(NR_SLAB_RECLAIMABLE) +
global_node_page_state(NR_SLAB_UNRECLAIMABLE));
show_val_kb(m, "SReclaimable: ",
global_node_page_state(NR_SLAB_RECLAIMABLE));
show_val_kb(m, "SUnreclaim: ",
global_node_page_state(NR_SLAB_UNRECLAIMABLE));
seq_printf(m, "KernelStack: %8lu kB\n",
global_zone_page_state(NR_KERNEL_STACK_KB));
show_val_kb(m, "PageTables: ",
global_zone_page_state(NR_PAGETABLE));
#ifdef CONFIG_QUICKLIST
show_val_kb(m, "Quicklists: ", quicklist_total_size());
#endif
show_val_kb(m, "NFS_Unstable: ",
global_node_page_state(NR_UNSTABLE_NFS));
show_val_kb(m, "Bounce: ",
global_zone_page_state(NR_BOUNCE));
show_val_kb(m, "WritebackTmp: ",
global_node_page_state(NR_WRITEBACK_TEMP));
show_val_kb(m, "CommitLimit: ", vm_commit_limit());
show_val_kb(m, "Committed_AS: ", committed);
seq_printf(m, "VmallocTotal: %8lu kB\n",
(unsigned long)VMALLOC_TOTAL >> 10);
show_val_kb(m, "VmallocUsed: ", 0ul);
show_val_kb(m, "VmallocChunk: ", 0ul);
#ifdef CONFIG_MEMORY_FAILURE
seq_printf(m, "HardwareCorrupted: %5lu kB\n",
atomic_long_read(&num_poisoned_pages) << (PAGE_SHIFT - 10));
#endif
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
show_val_kb(m, "AnonHugePages: ",
global_node_page_state(NR_ANON_THPS) * HPAGE_PMD_NR);
show_val_kb(m, "ShmemHugePages: ",
global_node_page_state(NR_SHMEM_THPS) * HPAGE_PMD_NR);
show_val_kb(m, "ShmemPmdMapped: ",
global_node_page_state(NR_SHMEM_PMDMAPPED) * HPAGE_PMD_NR);
#endif
#ifdef CONFIG_CMA
show_val_kb(m, "CmaTotal: ", totalcma_pages);
show_val_kb(m, "CmaFree: ",
global_zone_page_state(NR_FREE_CMA_PAGES));
#endif
hugetlb_report_meminfo(m);
arch_report_meminfo(m);
return 0;
}
static int meminfo_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, meminfo_proc_show, NULL);
}
static const struct file_operations meminfo_proc_fops = {
.open = meminfo_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init proc_meminfo_init(void)
{
proc_create("meminfo", 0, NULL, &meminfo_proc_fops);
return 0;
}
fs_initcall(proc_meminfo_init);