mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-18 17:54:13 +08:00
e84665c9cb
The initial version of the DSA driver only supported a single switch chip per network interface, while DSA-capable switch chips can be interconnected to form a tree of switch chips. This patch adds support for multiple switch chips on a network interface. An example topology for a 16-port device with an embedded CPU is as follows: +-----+ +--------+ +--------+ | |eth0 10| switch |9 10| switch | | CPU +----------+ +-------+ | | | | chip 0 | | chip 1 | +-----+ +---++---+ +---++---+ || || || || ||1000baseT ||1000baseT ||ports 1-8 ||ports 9-16 This requires a couple of interdependent changes in the DSA layer: - The dsa platform driver data needs to be extended: there is still only one netdevice per DSA driver instance (eth0 in the example above), but each of the switch chips in the tree needs its own mii_bus device pointer, MII management bus address, and port name array. (include/net/dsa.h) The existing in-tree dsa users need some small changes to deal with this. (arch/arm) - The DSA and Ethertype DSA tagging modules need to be extended to use the DSA device ID field on receive and demultiplex the packet accordingly, and fill in the DSA device ID field on transmit according to which switch chip the packet is heading to. (net/dsa/tag_{dsa,edsa}.c) - The concept of "CPU port", which is the switch chip port that the CPU is connected to (port 10 on switch chip 0 in the example), needs to be extended with the concept of "upstream port", which is the port on the switch chip that will bring us one hop closer to the CPU (port 10 for both switch chips in the example above). - The dsa platform data needs to specify which ports on which switch chips are links to other switch chips, so that we can enable DSA tagging mode on them. (For inter-switch links, we always use non-EtherType DSA tagging, since it has lower overhead. The CPU link uses dsa or edsa tagging depending on what the 'root' switch chip supports.) This is done by specifying "dsa" for the given port in the port array. - The dsa platform data needs to be extended with information on via which port to reach any given switch chip from any given switch chip. This info is specified via the per-switch chip data struct ->rtable[] array, which gives the nexthop ports for each of the other switches in the tree. For the example topology above, the dsa platform data would look something like this: static struct dsa_chip_data sw[2] = { { .mii_bus = &foo, .sw_addr = 1, .port_names[0] = "p1", .port_names[1] = "p2", .port_names[2] = "p3", .port_names[3] = "p4", .port_names[4] = "p5", .port_names[5] = "p6", .port_names[6] = "p7", .port_names[7] = "p8", .port_names[9] = "dsa", .port_names[10] = "cpu", .rtable = (s8 []){ -1, 9, }, }, { .mii_bus = &foo, .sw_addr = 2, .port_names[0] = "p9", .port_names[1] = "p10", .port_names[2] = "p11", .port_names[3] = "p12", .port_names[4] = "p13", .port_names[5] = "p14", .port_names[6] = "p15", .port_names[7] = "p16", .port_names[10] = "dsa", .rtable = (s8 []){ 10, -1, }, }, }, static struct dsa_platform_data pd = { .netdev = &foo, .nr_switches = 2, .sw = sw, }; Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
182 lines
4.0 KiB
C
182 lines
4.0 KiB
C
/*
|
|
* net/dsa/dsa_priv.h - Hardware switch handling
|
|
* Copyright (c) 2008-2009 Marvell Semiconductor
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef __DSA_PRIV_H
|
|
#define __DSA_PRIV_H
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/workqueue.h>
|
|
#include <net/dsa.h>
|
|
|
|
struct dsa_switch {
|
|
/*
|
|
* Parent switch tree, and switch index.
|
|
*/
|
|
struct dsa_switch_tree *dst;
|
|
int index;
|
|
|
|
/*
|
|
* Configuration data for this switch.
|
|
*/
|
|
struct dsa_chip_data *pd;
|
|
|
|
/*
|
|
* The used switch driver.
|
|
*/
|
|
struct dsa_switch_driver *drv;
|
|
|
|
/*
|
|
* Reference to mii bus to use.
|
|
*/
|
|
struct mii_bus *master_mii_bus;
|
|
|
|
/*
|
|
* Slave mii_bus and devices for the individual ports.
|
|
*/
|
|
u32 dsa_port_mask;
|
|
u32 phys_port_mask;
|
|
struct mii_bus *slave_mii_bus;
|
|
struct net_device *ports[DSA_MAX_PORTS];
|
|
};
|
|
|
|
struct dsa_switch_tree {
|
|
/*
|
|
* Configuration data for the platform device that owns
|
|
* this dsa switch tree instance.
|
|
*/
|
|
struct dsa_platform_data *pd;
|
|
|
|
/*
|
|
* Reference to network device to use, and which tagging
|
|
* protocol to use.
|
|
*/
|
|
struct net_device *master_netdev;
|
|
__be16 tag_protocol;
|
|
|
|
/*
|
|
* The switch and port to which the CPU is attached.
|
|
*/
|
|
s8 cpu_switch;
|
|
s8 cpu_port;
|
|
|
|
/*
|
|
* Link state polling.
|
|
*/
|
|
int link_poll_needed;
|
|
struct work_struct link_poll_work;
|
|
struct timer_list link_poll_timer;
|
|
|
|
/*
|
|
* Data for the individual switch chips.
|
|
*/
|
|
struct dsa_switch *ds[DSA_MAX_SWITCHES];
|
|
};
|
|
|
|
static inline bool dsa_is_cpu_port(struct dsa_switch *ds, int p)
|
|
{
|
|
return !!(ds->index == ds->dst->cpu_switch && p == ds->dst->cpu_port);
|
|
}
|
|
|
|
static inline u8 dsa_upstream_port(struct dsa_switch *ds)
|
|
{
|
|
struct dsa_switch_tree *dst = ds->dst;
|
|
|
|
/*
|
|
* If this is the root switch (i.e. the switch that connects
|
|
* to the CPU), return the cpu port number on this switch.
|
|
* Else return the (DSA) port number that connects to the
|
|
* switch that is one hop closer to the cpu.
|
|
*/
|
|
if (dst->cpu_switch == ds->index)
|
|
return dst->cpu_port;
|
|
else
|
|
return ds->pd->rtable[dst->cpu_switch];
|
|
}
|
|
|
|
struct dsa_slave_priv {
|
|
/*
|
|
* The linux network interface corresponding to this
|
|
* switch port.
|
|
*/
|
|
struct net_device *dev;
|
|
|
|
/*
|
|
* Which switch this port is a part of, and the port index
|
|
* for this port.
|
|
*/
|
|
struct dsa_switch *parent;
|
|
u8 port;
|
|
|
|
/*
|
|
* The phylib phy_device pointer for the PHY connected
|
|
* to this port.
|
|
*/
|
|
struct phy_device *phy;
|
|
};
|
|
|
|
struct dsa_switch_driver {
|
|
struct list_head list;
|
|
|
|
__be16 tag_protocol;
|
|
int priv_size;
|
|
|
|
/*
|
|
* Probing and setup.
|
|
*/
|
|
char *(*probe)(struct mii_bus *bus, int sw_addr);
|
|
int (*setup)(struct dsa_switch *ds);
|
|
int (*set_addr)(struct dsa_switch *ds, u8 *addr);
|
|
|
|
/*
|
|
* Access to the switch's PHY registers.
|
|
*/
|
|
int (*phy_read)(struct dsa_switch *ds, int port, int regnum);
|
|
int (*phy_write)(struct dsa_switch *ds, int port,
|
|
int regnum, u16 val);
|
|
|
|
/*
|
|
* Link state polling and IRQ handling.
|
|
*/
|
|
void (*poll_link)(struct dsa_switch *ds);
|
|
|
|
/*
|
|
* ethtool hardware statistics.
|
|
*/
|
|
void (*get_strings)(struct dsa_switch *ds, int port, uint8_t *data);
|
|
void (*get_ethtool_stats)(struct dsa_switch *ds,
|
|
int port, uint64_t *data);
|
|
int (*get_sset_count)(struct dsa_switch *ds);
|
|
};
|
|
|
|
/* dsa.c */
|
|
extern char dsa_driver_version[];
|
|
void register_switch_driver(struct dsa_switch_driver *type);
|
|
void unregister_switch_driver(struct dsa_switch_driver *type);
|
|
|
|
/* slave.c */
|
|
void dsa_slave_mii_bus_init(struct dsa_switch *ds);
|
|
struct net_device *dsa_slave_create(struct dsa_switch *ds,
|
|
struct device *parent,
|
|
int port, char *name);
|
|
|
|
/* tag_dsa.c */
|
|
int dsa_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
|
|
/* tag_edsa.c */
|
|
int edsa_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
|
|
/* tag_trailer.c */
|
|
int trailer_xmit(struct sk_buff *skb, struct net_device *dev);
|
|
|
|
|
|
#endif
|