mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 14:44:10 +08:00
7d844ac3b5
The only usages of these are to assign their address to the ops field in the regulator_desc struct, which is a const pointer. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200829221104.20870-6-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
534 lines
14 KiB
C
534 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Regulator driver for tps65090 power management chip.
|
|
*
|
|
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
|
|
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
#include <linux/mfd/tps65090.h>
|
|
|
|
#define MAX_CTRL_READ_TRIES 5
|
|
#define MAX_FET_ENABLE_TRIES 1000
|
|
|
|
#define CTRL_EN_BIT 0 /* Regulator enable bit, active high */
|
|
#define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */
|
|
#define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */
|
|
#define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */
|
|
|
|
#define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */
|
|
|
|
/**
|
|
* struct tps65090_regulator - Per-regulator data for a tps65090 regulator
|
|
*
|
|
* @dev: Pointer to our device.
|
|
* @desc: The struct regulator_desc for the regulator.
|
|
* @rdev: The struct regulator_dev for the regulator.
|
|
* @overcurrent_wait_valid: True if overcurrent_wait is valid.
|
|
* @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
|
|
*/
|
|
|
|
struct tps65090_regulator {
|
|
struct device *dev;
|
|
struct regulator_desc *desc;
|
|
struct regulator_dev *rdev;
|
|
bool overcurrent_wait_valid;
|
|
int overcurrent_wait;
|
|
};
|
|
|
|
static const struct regulator_ops tps65090_ext_control_ops = {
|
|
};
|
|
|
|
/**
|
|
* tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
|
|
*
|
|
* This will set the overcurrent wait time based on what's in the regulator
|
|
* info.
|
|
*
|
|
* @ri: Overall regulator data
|
|
* @rdev: Regulator device
|
|
*
|
|
* Return: 0 if no error, non-zero if there was an error writing the register.
|
|
*/
|
|
static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
|
|
struct regulator_dev *rdev)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
|
|
ri->overcurrent_wait << CTRL_WT_BIT);
|
|
if (ret) {
|
|
dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
|
|
rdev->desc->enable_reg);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* tps65090_try_enable_fet - Try to enable a FET
|
|
*
|
|
* @rdev: Regulator device
|
|
*
|
|
* Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
|
|
* set, or some other -ve value if another error occurred (e.g. i2c error)
|
|
*/
|
|
static int tps65090_try_enable_fet(struct regulator_dev *rdev)
|
|
{
|
|
unsigned int control;
|
|
int ret, i;
|
|
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask,
|
|
rdev->desc->enable_mask);
|
|
if (ret < 0) {
|
|
dev_err(&rdev->dev, "Error in updating reg %#x\n",
|
|
rdev->desc->enable_reg);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
|
|
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
|
|
&control);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(control & BIT(CTRL_TO_BIT)))
|
|
break;
|
|
|
|
usleep_range(1000, 1500);
|
|
}
|
|
if (!(control & BIT(CTRL_PG_BIT)))
|
|
return -ENOTRECOVERABLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* tps65090_fet_enable - Enable a FET, trying a few times if it fails
|
|
*
|
|
* Some versions of the tps65090 have issues when turning on the FETs.
|
|
* This function goes through several steps to ensure the best chance of the
|
|
* FET going on. Specifically:
|
|
* - We'll make sure that we bump the "overcurrent wait" to the maximum, which
|
|
* increases the chances that we'll turn on properly.
|
|
* - We'll retry turning the FET on multiple times (turning off in between).
|
|
*
|
|
* @rdev: Regulator device
|
|
*
|
|
* Return: 0 if ok, non-zero if it fails.
|
|
*/
|
|
static int tps65090_fet_enable(struct regulator_dev *rdev)
|
|
{
|
|
int ret, tries;
|
|
|
|
/*
|
|
* Try enabling multiple times until we succeed since sometimes the
|
|
* first try times out.
|
|
*/
|
|
tries = 0;
|
|
while (true) {
|
|
ret = tps65090_try_enable_fet(rdev);
|
|
if (!ret)
|
|
break;
|
|
if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
|
|
goto err;
|
|
|
|
/* Try turning the FET off (and then on again) */
|
|
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
|
rdev->desc->enable_mask, 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
tries++;
|
|
}
|
|
|
|
if (tries)
|
|
dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
|
|
rdev->desc->enable_reg, tries);
|
|
|
|
return 0;
|
|
err:
|
|
dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
|
|
WARN_ON(1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct regulator_ops tps65090_reg_control_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops tps65090_fet_control_ops = {
|
|
.enable = tps65090_fet_enable,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static const struct regulator_ops tps65090_ldo_ops = {
|
|
};
|
|
|
|
#define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
|
|
{ \
|
|
.name = "TPS65090_RAILS"#_id, \
|
|
.supply_name = _sname, \
|
|
.id = TPS65090_REGULATOR_##_id, \
|
|
.n_voltages = _nvolt, \
|
|
.ops = &_ops, \
|
|
.fixed_uV = _volt, \
|
|
.enable_reg = _en_reg, \
|
|
.enable_val = _en_bits, \
|
|
.enable_mask = _en_bits, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
}
|
|
|
|
#define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
|
|
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
|
|
|
|
#define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
|
|
tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
|
|
|
|
static struct regulator_desc tps65090_regulator_desc[] = {
|
|
tps65090_REG_FIXEDV(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), 5000000,
|
|
tps65090_reg_control_ops),
|
|
tps65090_REG_FIXEDV(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), 3300000,
|
|
tps65090_reg_control_ops),
|
|
tps65090_REG_SWITCH(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
|
|
tps65090_reg_control_ops),
|
|
|
|
tps65090_REG_SWITCH(FET1, "infet1", 0x0F,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
tps65090_REG_SWITCH(FET2, "infet2", 0x10,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
tps65090_REG_SWITCH(FET3, "infet3", 0x11,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
tps65090_REG_SWITCH(FET4, "infet4", 0x12,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
tps65090_REG_SWITCH(FET5, "infet5", 0x13,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
tps65090_REG_SWITCH(FET6, "infet6", 0x14,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
tps65090_REG_SWITCH(FET7, "infet7", 0x15,
|
|
BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
|
|
tps65090_fet_control_ops),
|
|
|
|
tps65090_REG_FIXEDV(LDO1, "vsys-l1", 0, 0, 5000000,
|
|
tps65090_ldo_ops),
|
|
tps65090_REG_FIXEDV(LDO2, "vsys-l2", 0, 0, 3300000,
|
|
tps65090_ldo_ops),
|
|
};
|
|
|
|
static inline bool is_dcdc(int id)
|
|
{
|
|
switch (id) {
|
|
case TPS65090_REGULATOR_DCDC1:
|
|
case TPS65090_REGULATOR_DCDC2:
|
|
case TPS65090_REGULATOR_DCDC3:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int tps65090_config_ext_control(
|
|
struct tps65090_regulator *ri, bool enable)
|
|
{
|
|
int ret;
|
|
struct device *parent = ri->dev->parent;
|
|
unsigned int reg_en_reg = ri->desc->enable_reg;
|
|
|
|
if (enable)
|
|
ret = tps65090_set_bits(parent, reg_en_reg, 1);
|
|
else
|
|
ret = tps65090_clr_bits(parent, reg_en_reg, 1);
|
|
if (ret < 0)
|
|
dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
|
|
return ret;
|
|
}
|
|
|
|
static int tps65090_regulator_disable_ext_control(
|
|
struct tps65090_regulator *ri,
|
|
struct tps65090_regulator_plat_data *tps_pdata)
|
|
{
|
|
int ret = 0;
|
|
struct device *parent = ri->dev->parent;
|
|
unsigned int reg_en_reg = ri->desc->enable_reg;
|
|
|
|
/*
|
|
* First enable output for internal control if require.
|
|
* And then disable external control.
|
|
*/
|
|
if (tps_pdata->reg_init_data->constraints.always_on ||
|
|
tps_pdata->reg_init_data->constraints.boot_on) {
|
|
ret = tps65090_set_bits(parent, reg_en_reg, 0);
|
|
if (ret < 0) {
|
|
dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg);
|
|
return ret;
|
|
}
|
|
}
|
|
return tps65090_config_ext_control(ri, false);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct of_regulator_match tps65090_matches[] = {
|
|
{ .name = "dcdc1", },
|
|
{ .name = "dcdc2", },
|
|
{ .name = "dcdc3", },
|
|
{ .name = "fet1", },
|
|
{ .name = "fet2", },
|
|
{ .name = "fet3", },
|
|
{ .name = "fet4", },
|
|
{ .name = "fet5", },
|
|
{ .name = "fet6", },
|
|
{ .name = "fet7", },
|
|
{ .name = "ldo1", },
|
|
{ .name = "ldo2", },
|
|
};
|
|
|
|
static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
|
|
struct platform_device *pdev,
|
|
struct of_regulator_match **tps65090_reg_matches)
|
|
{
|
|
struct tps65090_platform_data *tps65090_pdata;
|
|
struct device_node *np = pdev->dev.parent->of_node;
|
|
struct device_node *regulators;
|
|
int idx = 0, ret;
|
|
struct tps65090_regulator_plat_data *reg_pdata;
|
|
|
|
tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
|
|
GFP_KERNEL);
|
|
if (!tps65090_pdata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
reg_pdata = devm_kcalloc(&pdev->dev,
|
|
TPS65090_REGULATOR_MAX, sizeof(*reg_pdata),
|
|
GFP_KERNEL);
|
|
if (!reg_pdata)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
regulators = of_get_child_by_name(np, "regulators");
|
|
if (!regulators) {
|
|
dev_err(&pdev->dev, "regulator node not found\n");
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
|
|
ARRAY_SIZE(tps65090_matches));
|
|
of_node_put(regulators);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Error parsing regulator init data: %d\n", ret);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
*tps65090_reg_matches = tps65090_matches;
|
|
for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
|
|
struct regulator_init_data *ri_data;
|
|
struct tps65090_regulator_plat_data *rpdata;
|
|
struct device_node *np;
|
|
|
|
rpdata = ®_pdata[idx];
|
|
ri_data = tps65090_matches[idx].init_data;
|
|
if (!ri_data)
|
|
continue;
|
|
|
|
np = tps65090_matches[idx].of_node;
|
|
if (!np)
|
|
continue;
|
|
|
|
rpdata->reg_init_data = ri_data;
|
|
rpdata->enable_ext_control = of_property_read_bool(np,
|
|
"ti,enable-ext-control");
|
|
if (rpdata->enable_ext_control) {
|
|
enum gpiod_flags gflags;
|
|
|
|
if (ri_data->constraints.always_on ||
|
|
ri_data->constraints.boot_on)
|
|
gflags = GPIOD_OUT_HIGH;
|
|
else
|
|
gflags = GPIOD_OUT_LOW;
|
|
gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
|
|
|
|
rpdata->gpiod = devm_fwnode_gpiod_get(
|
|
&pdev->dev,
|
|
of_fwnode_handle(np),
|
|
"dcdc-ext-control",
|
|
gflags,
|
|
"tps65090");
|
|
if (PTR_ERR(rpdata->gpiod) == -ENOENT) {
|
|
dev_err(&pdev->dev,
|
|
"could not find DCDC external control GPIO\n");
|
|
rpdata->gpiod = NULL;
|
|
} else if (IS_ERR(rpdata->gpiod))
|
|
return ERR_CAST(rpdata->gpiod);
|
|
}
|
|
|
|
if (of_property_read_u32(np, "ti,overcurrent-wait",
|
|
&rpdata->overcurrent_wait) == 0)
|
|
rpdata->overcurrent_wait_valid = true;
|
|
|
|
tps65090_pdata->reg_pdata[idx] = rpdata;
|
|
}
|
|
return tps65090_pdata;
|
|
}
|
|
#else
|
|
static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
|
|
struct platform_device *pdev,
|
|
struct of_regulator_match **tps65090_reg_matches)
|
|
{
|
|
*tps65090_reg_matches = NULL;
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static int tps65090_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
|
|
struct tps65090_regulator *ri = NULL;
|
|
struct regulator_config config = { };
|
|
struct regulator_dev *rdev;
|
|
struct tps65090_regulator_plat_data *tps_pdata;
|
|
struct tps65090_regulator *pmic;
|
|
struct tps65090_platform_data *tps65090_pdata;
|
|
struct of_regulator_match *tps65090_reg_matches = NULL;
|
|
int num;
|
|
int ret;
|
|
|
|
dev_dbg(&pdev->dev, "Probing regulator\n");
|
|
|
|
tps65090_pdata = dev_get_platdata(pdev->dev.parent);
|
|
if (!tps65090_pdata && tps65090_mfd->dev->of_node)
|
|
tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
|
|
&tps65090_reg_matches);
|
|
if (IS_ERR_OR_NULL(tps65090_pdata)) {
|
|
dev_err(&pdev->dev, "Platform data missing\n");
|
|
return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
|
|
}
|
|
|
|
pmic = devm_kcalloc(&pdev->dev,
|
|
TPS65090_REGULATOR_MAX, sizeof(*pmic),
|
|
GFP_KERNEL);
|
|
if (!pmic)
|
|
return -ENOMEM;
|
|
|
|
for (num = 0; num < TPS65090_REGULATOR_MAX; num++) {
|
|
tps_pdata = tps65090_pdata->reg_pdata[num];
|
|
|
|
ri = &pmic[num];
|
|
ri->dev = &pdev->dev;
|
|
ri->desc = &tps65090_regulator_desc[num];
|
|
if (tps_pdata) {
|
|
ri->overcurrent_wait_valid =
|
|
tps_pdata->overcurrent_wait_valid;
|
|
ri->overcurrent_wait = tps_pdata->overcurrent_wait;
|
|
}
|
|
|
|
/*
|
|
* TPS5090 DCDC support the control from external digital input.
|
|
* Configure it as per platform data.
|
|
*/
|
|
if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
|
|
if (tps_pdata->enable_ext_control) {
|
|
config.ena_gpiod = tps_pdata->gpiod;
|
|
ri->desc->ops = &tps65090_ext_control_ops;
|
|
} else {
|
|
ret = tps65090_regulator_disable_ext_control(
|
|
ri, tps_pdata);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"failed disable ext control\n");
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
config.dev = pdev->dev.parent;
|
|
config.driver_data = ri;
|
|
config.regmap = tps65090_mfd->rmap;
|
|
if (tps_pdata)
|
|
config.init_data = tps_pdata->reg_init_data;
|
|
else
|
|
config.init_data = NULL;
|
|
if (tps65090_reg_matches)
|
|
config.of_node = tps65090_reg_matches[num].of_node;
|
|
else
|
|
config.of_node = NULL;
|
|
|
|
/*
|
|
* Hand the GPIO descriptor management over to the regulator
|
|
* core, remove it from devres management.
|
|
*/
|
|
if (config.ena_gpiod)
|
|
devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
|
|
rdev = devm_regulator_register(&pdev->dev, ri->desc, &config);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
|
ri->desc->name);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
ri->rdev = rdev;
|
|
|
|
if (ri->overcurrent_wait_valid) {
|
|
ret = tps65090_reg_set_overcurrent_wait(ri, rdev);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* Enable external control if it is require */
|
|
if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
|
|
tps_pdata->enable_ext_control) {
|
|
ret = tps65090_config_ext_control(ri, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, pmic);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver tps65090_regulator_driver = {
|
|
.driver = {
|
|
.name = "tps65090-pmic",
|
|
},
|
|
.probe = tps65090_regulator_probe,
|
|
};
|
|
|
|
static int __init tps65090_regulator_init(void)
|
|
{
|
|
return platform_driver_register(&tps65090_regulator_driver);
|
|
}
|
|
subsys_initcall(tps65090_regulator_init);
|
|
|
|
static void __exit tps65090_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&tps65090_regulator_driver);
|
|
}
|
|
module_exit(tps65090_regulator_exit);
|
|
|
|
MODULE_DESCRIPTION("tps65090 regulator driver");
|
|
MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:tps65090-pmic");
|