mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-25 05:04:09 +08:00
b0391479ae
When converting milliseconds to microseconds in commit fffa6af948
("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps
were introduced between the various ranges supported by the controller.
Fix this by changing the start of each range to the value immediately
following the end of the previous range. This way a debounce time of,
say 8250 us will translate into 16 ms instead of returning an -EINVAL
error.
Typically the debounce delay is only ever set through device tree and
specified in milliseconds, so we can never really hit this issue because
debounce times are always a multiple of 1000 us.
The only notable exception for this is drivers/mmc/host/mmc-spi.c where
the CD GPIO is requested, which passes a 1 us debounce time. According
to a comment preceeding that code this should actually be 1 ms (i.e.
1000 us).
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
338 lines
9.0 KiB
C
338 lines
9.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* MAXIM MAX77620 GPIO driver
|
|
*
|
|
* Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/max77620.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define GPIO_REG_ADDR(offset) (MAX77620_REG_GPIO0 + offset)
|
|
|
|
struct max77620_gpio {
|
|
struct gpio_chip gpio_chip;
|
|
struct regmap *rmap;
|
|
struct device *dev;
|
|
};
|
|
|
|
static const struct regmap_irq max77620_gpio_irqs[] = {
|
|
[0] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE0,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 0,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[1] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE1,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 1,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[2] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE2,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 2,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[3] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE3,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 3,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[4] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE4,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 4,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[5] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE5,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 5,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[6] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE6,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 6,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
[7] = {
|
|
.reg_offset = 0,
|
|
.mask = MAX77620_IRQ_LVL2_GPIO_EDGE7,
|
|
.type = {
|
|
.type_rising_val = MAX77620_CNFG_GPIO_INT_RISING,
|
|
.type_falling_val = MAX77620_CNFG_GPIO_INT_FALLING,
|
|
.type_reg_mask = MAX77620_CNFG_GPIO_INT_MASK,
|
|
.type_reg_offset = 7,
|
|
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct regmap_irq_chip max77620_gpio_irq_chip = {
|
|
.name = "max77620-gpio",
|
|
.irqs = max77620_gpio_irqs,
|
|
.num_irqs = ARRAY_SIZE(max77620_gpio_irqs),
|
|
.num_regs = 1,
|
|
.num_type_reg = 8,
|
|
.irq_reg_stride = 1,
|
|
.type_reg_stride = 1,
|
|
.status_base = MAX77620_REG_IRQ_LVL2_GPIO,
|
|
.type_base = MAX77620_REG_GPIO0,
|
|
};
|
|
|
|
static int max77620_gpio_dir_input(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct max77620_gpio *mgpio = gpiochip_get_data(gc);
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_DIR_MASK,
|
|
MAX77620_CNFG_GPIO_DIR_INPUT);
|
|
if (ret < 0)
|
|
dev_err(mgpio->dev, "CNFG_GPIOx dir update failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max77620_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct max77620_gpio *mgpio = gpiochip_get_data(gc);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(mgpio->rmap, GPIO_REG_ADDR(offset), &val);
|
|
if (ret < 0) {
|
|
dev_err(mgpio->dev, "CNFG_GPIOx read failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (val & MAX77620_CNFG_GPIO_DIR_MASK)
|
|
return !!(val & MAX77620_CNFG_GPIO_INPUT_VAL_MASK);
|
|
else
|
|
return !!(val & MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK);
|
|
}
|
|
|
|
static int max77620_gpio_dir_output(struct gpio_chip *gc, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct max77620_gpio *mgpio = gpiochip_get_data(gc);
|
|
u8 val;
|
|
int ret;
|
|
|
|
val = (value) ? MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH :
|
|
MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW;
|
|
|
|
ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK, val);
|
|
if (ret < 0) {
|
|
dev_err(mgpio->dev, "CNFG_GPIOx val update failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_DIR_MASK,
|
|
MAX77620_CNFG_GPIO_DIR_OUTPUT);
|
|
if (ret < 0)
|
|
dev_err(mgpio->dev, "CNFG_GPIOx dir update failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max77620_gpio_set_debounce(struct max77620_gpio *mgpio,
|
|
unsigned int offset,
|
|
unsigned int debounce)
|
|
{
|
|
u8 val;
|
|
int ret;
|
|
|
|
switch (debounce) {
|
|
case 0:
|
|
val = MAX77620_CNFG_GPIO_DBNC_None;
|
|
break;
|
|
case 1 ... 8000:
|
|
val = MAX77620_CNFG_GPIO_DBNC_8ms;
|
|
break;
|
|
case 8001 ... 16000:
|
|
val = MAX77620_CNFG_GPIO_DBNC_16ms;
|
|
break;
|
|
case 16001 ... 32000:
|
|
val = MAX77620_CNFG_GPIO_DBNC_32ms;
|
|
break;
|
|
default:
|
|
dev_err(mgpio->dev, "Illegal value %u\n", debounce);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_DBNC_MASK, val);
|
|
if (ret < 0)
|
|
dev_err(mgpio->dev, "CNFG_GPIOx_DBNC update failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void max77620_gpio_set(struct gpio_chip *gc, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct max77620_gpio *mgpio = gpiochip_get_data(gc);
|
|
u8 val;
|
|
int ret;
|
|
|
|
val = (value) ? MAX77620_CNFG_GPIO_OUTPUT_VAL_HIGH :
|
|
MAX77620_CNFG_GPIO_OUTPUT_VAL_LOW;
|
|
|
|
ret = regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_OUTPUT_VAL_MASK, val);
|
|
if (ret < 0)
|
|
dev_err(mgpio->dev, "CNFG_GPIO_OUT update failed: %d\n", ret);
|
|
}
|
|
|
|
static int max77620_gpio_set_config(struct gpio_chip *gc, unsigned int offset,
|
|
unsigned long config)
|
|
{
|
|
struct max77620_gpio *mgpio = gpiochip_get_data(gc);
|
|
|
|
switch (pinconf_to_config_param(config)) {
|
|
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
|
|
return regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_DRV_MASK,
|
|
MAX77620_CNFG_GPIO_DRV_OPENDRAIN);
|
|
case PIN_CONFIG_DRIVE_PUSH_PULL:
|
|
return regmap_update_bits(mgpio->rmap, GPIO_REG_ADDR(offset),
|
|
MAX77620_CNFG_GPIO_DRV_MASK,
|
|
MAX77620_CNFG_GPIO_DRV_PUSHPULL);
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
return max77620_gpio_set_debounce(mgpio, offset,
|
|
pinconf_to_config_argument(config));
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static int max77620_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct max77620_gpio *mgpio = gpiochip_get_data(gc);
|
|
struct max77620_chip *chip = dev_get_drvdata(mgpio->dev->parent);
|
|
|
|
return regmap_irq_get_virq(chip->gpio_irq_data, offset);
|
|
}
|
|
|
|
static int max77620_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct max77620_chip *chip = dev_get_drvdata(pdev->dev.parent);
|
|
struct max77620_gpio *mgpio;
|
|
int gpio_irq;
|
|
int ret;
|
|
|
|
gpio_irq = platform_get_irq(pdev, 0);
|
|
if (gpio_irq <= 0)
|
|
return -ENODEV;
|
|
|
|
mgpio = devm_kzalloc(&pdev->dev, sizeof(*mgpio), GFP_KERNEL);
|
|
if (!mgpio)
|
|
return -ENOMEM;
|
|
|
|
mgpio->rmap = chip->rmap;
|
|
mgpio->dev = &pdev->dev;
|
|
|
|
mgpio->gpio_chip.label = pdev->name;
|
|
mgpio->gpio_chip.parent = &pdev->dev;
|
|
mgpio->gpio_chip.direction_input = max77620_gpio_dir_input;
|
|
mgpio->gpio_chip.get = max77620_gpio_get;
|
|
mgpio->gpio_chip.direction_output = max77620_gpio_dir_output;
|
|
mgpio->gpio_chip.set = max77620_gpio_set;
|
|
mgpio->gpio_chip.set_config = max77620_gpio_set_config;
|
|
mgpio->gpio_chip.to_irq = max77620_gpio_to_irq;
|
|
mgpio->gpio_chip.ngpio = MAX77620_GPIO_NR;
|
|
mgpio->gpio_chip.can_sleep = 1;
|
|
mgpio->gpio_chip.base = -1;
|
|
#ifdef CONFIG_OF_GPIO
|
|
mgpio->gpio_chip.of_node = pdev->dev.parent->of_node;
|
|
#endif
|
|
|
|
platform_set_drvdata(pdev, mgpio);
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &mgpio->gpio_chip, mgpio);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "gpio_init: Failed to add max77620_gpio\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = devm_regmap_add_irq_chip(&pdev->dev, chip->rmap, gpio_irq,
|
|
IRQF_ONESHOT, -1,
|
|
&max77620_gpio_irq_chip,
|
|
&chip->gpio_irq_data);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to add gpio irq_chip %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id max77620_gpio_devtype[] = {
|
|
{ .name = "max77620-gpio", },
|
|
{ .name = "max20024-gpio", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, max77620_gpio_devtype);
|
|
|
|
static struct platform_driver max77620_gpio_driver = {
|
|
.driver.name = "max77620-gpio",
|
|
.probe = max77620_gpio_probe,
|
|
.id_table = max77620_gpio_devtype,
|
|
};
|
|
|
|
module_platform_driver(max77620_gpio_driver);
|
|
|
|
MODULE_DESCRIPTION("GPIO interface for MAX77620 and MAX20024 PMIC");
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
MODULE_AUTHOR("Chaitanya Bandi <bandik@nvidia.com>");
|
|
MODULE_ALIAS("platform:max77620-gpio");
|
|
MODULE_LICENSE("GPL v2");
|