Waqar Hameed 5e1cd3e97e iio: Add event enums for running period and count ... There are devices (such as Murata IRS-D200 PIR proximity sensor) that check the data signal with a running period. I.e. for a specified time, they count the number of conditions that have occurred, and then signal if that is more than a specified amount. `IIO_EV_INFO_PERIOD` resets when the condition no longer is true and is therefore not suitable for these devices. Add a new `iio_event_info` `IIO_EV_INFO_RUNNING_PERIOD` that can be used as a running period. Also add a new `IIO_EV_INFO_RUNNING_COUNT` that can be used to specify the number of conditions that must occur during this running period. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/ee4a801ae9b9c4716c7bd23d8f79f232351df8bd.1689753076.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2023-07-23 13:16:18 +01:00
..
accel	iio: accel: adxl355: Simplify probe()	2023-07-22 17:24:51 +01:00
adc	iio: adc: meson: init voltage control bits	2023-07-22 17:58:23 +01:00
addac	iio: addac: ad74413: don't set DIN_SINK for functions other than digital input	2023-06-04 12:25:01 +01:00
afe	iio: afe: rescale: export symbols used during testing	2022-07-16 19:01:14 +01:00
amplifiers	iio: amplifiers: ad8366: add support for HMC792A Attenuator	2023-07-23 12:22:56 +01:00
buffer	iio: Don't silently expect attribute types	2022-11-23 19:44:04 +00:00
cdc	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
chemical	iio: chemical: scd4x: Add pressure compensation	2023-07-20 19:21:30 +01:00
common	iio: make invensense timestamp module generic	2023-07-20 19:21:28 +01:00
dac	1st set of IIO new device support, features and cleanup for the 6.5 cycle.	2023-06-15 13:01:55 +02:00
dummy	Bitmap patches for 5.19-rc1	2022-06-04 14:04:27 -07:00
filter	iio: filter: admv8818: close potential out-of-bounds read in __admv8818_read_[h|l]pf_freq()	2022-11-23 19:43:57 +00:00
frequency	iio: frequency: admv1013: Benefit from devm_clk_get_enabled() to simplify	2023-03-18 16:35:26 +00:00
gyro	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
health	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
humidity	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
imu	iio: imu: inv_mpu6050: read the full fifo when processing data	2023-07-20 19:21:30 +01:00
light	iio: light: vcnl4000: Add calibration bias for 4040/4200	2023-07-20 19:21:29 +01:00
magnetometer	1st set of IIO new device support, features and cleanup for the 6.5 cycle.	2023-06-15 13:01:55 +02:00
multiplexer	iio: multiplexer: Switch to use dev_err_probe() helper	2022-11-23 19:43:57 +00:00
orientation
position
potentiometer	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
potentiostat	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
pressure	iio: pressure: Honeywell mprls0025pa pressure sensor	2023-05-21 18:54:58 +01:00
proximity	iio: Switch i2c drivers back to use .probe()	2023-05-21 18:54:53 +01:00
resolver	iio: resolver: ad2s90: Fix alignment for DMA safety	2022-06-14 11:53:19 +01:00
temperature	iio: temperature: tmp006: Add OF device matching support	2023-05-28 20:22:03 +01:00
test	iio: test: Mark file local structure arrays static.	2022-08-15 22:30:01 +01:00
trigger	iio: Rename iio_trigger_poll_chained and add kernel-doc	2023-03-11 12:18:29 +00:00
iio_core_trigger.h
iio_core.h	iio: Mark iio_device_type as const	2021-11-17 17:51:35 +00:00
industrialio-buffer.c	iio: buffer: fix coding style warnings	2023-05-13 17:56:06 +01:00
industrialio-configfs.c
industrialio-core.c	iio: core: Improve indentation in a few places	2023-07-23 10:24:16 +01:00
industrialio-event.c	iio: Add event enums for running period and count	2023-07-23 13:16:18 +01:00
industrialio-gts-helper.c	iio: gts-helpers: fix integration time units	2023-05-13 17:54:57 +01:00
industrialio-sw-device.c	iio: Don't use bare "unsigned"	2022-07-01 11:19:08 +01:00
industrialio-sw-trigger.c	iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails	2022-11-12 17:53:35 +00:00
industrialio-trigger.c	iio: Make return value check for set_trigger_state() consistent	2023-07-20 19:21:30 +01:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix coding style warnings	2022-08-15 22:30:00 +01:00
Kconfig	iio: light: Add gain-time-scale helpers	2023-04-10 12:26:34 +01:00
Makefile	iio: light: Add gain-time-scale helpers	2023-04-10 12:26:34 +01:00
TODO	iio: core: move 'mlock' to 'struct iio_dev_opaque'	2022-11-23 19:44:00 +00:00