mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-04 09:34:12 +08:00
51c62982a3
Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:
<mach/pxa25x.h> - for pxa25x based platforms
<mach/pxa27x.h> - for pxa27x based platforms
<mach/pxa300.h> - for pxa300 based platforms
<mach/pxa320.h> - for pxa320 based platforms
<mach/pxa930.h> - for pxa930 based platforms
NOTE:
1. one header one board file, they are not compatible (i.e. they have
conflicting definitions which won't compile if included together).
2. Unless strictly necessary, the following header files are considered
to be SoC files use _only_, and is not recommended to be included in
board code:
<mach/hardware.h>
<mach/pxa-regs.h>
<mach/pxa2xx-regs.h>
<mach/pxa3xx-regs.h>
<mach/mfp.h>
<mach/mfp-pxa2xx.h>
<mach/mfp-pxa25x.h>
<mach/mfp-pxa27x.h>
<mach/mfp-pxa3xx.h>
<mach/mfp-pxa300.h>
<mach/mfp-pxa320.h>
<mach/mfp-pxa930.h>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
504 lines
11 KiB
C
504 lines
11 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/saar.c
|
|
*
|
|
* Support for the Marvell PXA930 Handheld Platform (aka SAAR)
|
|
*
|
|
* Copyright (C) 2007-2008 Marvell International Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/smc91x.h>
|
|
#include <linux/mfd/da903x.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include <mach/pxa930.h>
|
|
#include <mach/i2c.h>
|
|
#include <mach/pxafb.h>
|
|
|
|
#include "devices.h"
|
|
#include "generic.h"
|
|
|
|
#define GPIO_LCD_RESET (16)
|
|
|
|
/* SAAR MFP configurations */
|
|
static mfp_cfg_t saar_mfp_cfg[] __initdata = {
|
|
/* LCD */
|
|
GPIO23_LCD_DD0,
|
|
GPIO24_LCD_DD1,
|
|
GPIO25_LCD_DD2,
|
|
GPIO26_LCD_DD3,
|
|
GPIO27_LCD_DD4,
|
|
GPIO28_LCD_DD5,
|
|
GPIO29_LCD_DD6,
|
|
GPIO44_LCD_DD7,
|
|
GPIO21_LCD_CS,
|
|
GPIO22_LCD_VSYNC,
|
|
GPIO17_LCD_FCLK_RD,
|
|
GPIO18_LCD_LCLK_A0,
|
|
GPIO19_LCD_PCLK_WR,
|
|
GPIO16_GPIO, /* LCD reset */
|
|
|
|
/* Ethernet */
|
|
DF_nCS1_nCS3,
|
|
GPIO97_GPIO,
|
|
};
|
|
|
|
#define SAAR_ETH_PHYS (0x14000000)
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = (SAAR_ETH_PHYS + 0x300),
|
|
.end = (SAAR_ETH_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
|
|
.end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct smc91x_platdata saar_smc91x_info = {
|
|
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
.dev = {
|
|
.platform_data = &saar_smc91x_info,
|
|
},
|
|
};
|
|
|
|
#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
|
|
static uint16_t lcd_power_on[] = {
|
|
/* single frame */
|
|
SMART_CMD_NOOP,
|
|
SMART_CMD(0x00),
|
|
SMART_DELAY(0),
|
|
|
|
SMART_CMD_NOOP,
|
|
SMART_CMD(0x00),
|
|
SMART_DELAY(0),
|
|
|
|
SMART_CMD_NOOP,
|
|
SMART_CMD(0x00),
|
|
SMART_DELAY(0),
|
|
|
|
SMART_CMD_NOOP,
|
|
SMART_CMD(0x00),
|
|
SMART_DELAY(10),
|
|
|
|
/* calibration control */
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0xA4),
|
|
SMART_DAT(0x80),
|
|
SMART_DAT(0x01),
|
|
SMART_DELAY(150),
|
|
|
|
/*Power-On Init sequence*/
|
|
SMART_CMD(0x00), /* output ctrl */
|
|
SMART_CMD(0x01),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* wave ctrl */
|
|
SMART_CMD(0x02),
|
|
SMART_DAT(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x03), /* entry mode */
|
|
SMART_DAT(0xD0),
|
|
SMART_DAT(0x30),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x08), /* display ctrl 2 */
|
|
SMART_DAT(0x08),
|
|
SMART_DAT(0x08),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x09), /* display ctrl 3 */
|
|
SMART_DAT(0x04),
|
|
SMART_DAT(0x2F),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x0A), /* display ctrl 4 */
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x08),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x0D), /* Frame Marker position */
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x08),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x60), /* Driver output control */
|
|
SMART_DAT(0x27),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x61), /* Base image display control */
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x01),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x30), /* Y settings 30h-3Dh */
|
|
SMART_DAT(0x07),
|
|
SMART_DAT(0x07),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x31),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x07),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x32), /* Timing(3), ASW HOLD=0.5CLK */
|
|
SMART_DAT(0x04),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x33), /* Timing(4), CKV ST=0CLK, CKV ED=1CLK */
|
|
SMART_DAT(0x03),
|
|
SMART_DAT(0x03),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x34),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x35),
|
|
SMART_DAT(0x02),
|
|
SMART_DAT(0x05),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x36),
|
|
SMART_DAT(0x1F),
|
|
SMART_DAT(0x1F),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x37),
|
|
SMART_DAT(0x07),
|
|
SMART_DAT(0x07),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x38),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x07),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x39),
|
|
SMART_DAT(0x04),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x3A),
|
|
SMART_DAT(0x03),
|
|
SMART_DAT(0x03),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x3B),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x3C),
|
|
SMART_DAT(0x02),
|
|
SMART_DAT(0x05),
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x3D),
|
|
SMART_DAT(0x1F),
|
|
SMART_DAT(0x1F),
|
|
SMART_CMD(0x00), /* Display control 1 */
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x01),
|
|
SMART_CMD(0x00), /* Power control 5 */
|
|
SMART_CMD(0x17),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x01),
|
|
SMART_CMD(0x00), /* Power control 1 */
|
|
SMART_CMD(0x10),
|
|
SMART_DAT(0x10),
|
|
SMART_DAT(0xB0),
|
|
SMART_CMD(0x00), /* Power control 2 */
|
|
SMART_CMD(0x11),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x30),
|
|
SMART_CMD(0x00), /* Power control 3 */
|
|
SMART_CMD(0x12),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x9E),
|
|
SMART_CMD(0x00), /* Power control 4 */
|
|
SMART_CMD(0x13),
|
|
SMART_DAT(0x17),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* Power control 3 */
|
|
SMART_CMD(0x12),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0xBE),
|
|
SMART_DELAY(100),
|
|
|
|
/* display mode : 240*320 */
|
|
SMART_CMD(0x00), /* RAM address set(H) 0*/
|
|
SMART_CMD(0x20),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* RAM address set(V) 4*/
|
|
SMART_CMD(0x21),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* Start of Window RAM address set(H) 8*/
|
|
SMART_CMD(0x50),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* End of Window RAM address set(H) 12*/
|
|
SMART_CMD(0x51),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0xEF),
|
|
SMART_CMD(0x00), /* Start of Window RAM address set(V) 16*/
|
|
SMART_CMD(0x52),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* End of Window RAM address set(V) 20*/
|
|
SMART_CMD(0x53),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x3F),
|
|
SMART_CMD(0x00), /* Panel interface control 1 */
|
|
SMART_CMD(0x90),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x1A),
|
|
SMART_CMD(0x00), /* Panel interface control 2 */
|
|
SMART_CMD(0x92),
|
|
SMART_DAT(0x04),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* Panel interface control 3 */
|
|
SMART_CMD(0x93),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x05),
|
|
SMART_DELAY(20),
|
|
};
|
|
|
|
static uint16_t lcd_panel_on[] = {
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x21),
|
|
SMART_DELAY(1),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x61),
|
|
SMART_DELAY(100),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x73),
|
|
SMART_DELAY(1),
|
|
};
|
|
|
|
static uint16_t lcd_panel_off[] = {
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x72),
|
|
SMART_DELAY(40),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x01),
|
|
SMART_DELAY(1),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x07),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_DELAY(1),
|
|
};
|
|
|
|
static uint16_t lcd_power_off[] = {
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x10),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x80),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x11),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x60),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x12),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0xAE),
|
|
SMART_DELAY(40),
|
|
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x10),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
};
|
|
|
|
static uint16_t update_framedata[] = {
|
|
/* set display ram: 240*320 */
|
|
SMART_CMD(0x00), /* RAM address set(H) 0*/
|
|
SMART_CMD(0x20),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* RAM address set(V) 4*/
|
|
SMART_CMD(0x21),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* Start of Window RAM address set(H) 8 */
|
|
SMART_CMD(0x50),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* End of Window RAM address set(H) 12 */
|
|
SMART_CMD(0x51),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0xEF),
|
|
SMART_CMD(0x00), /* Start of Window RAM address set(V) 16 */
|
|
SMART_CMD(0x52),
|
|
SMART_DAT(0x00),
|
|
SMART_DAT(0x00),
|
|
SMART_CMD(0x00), /* End of Window RAM address set(V) 20 */
|
|
SMART_CMD(0x53),
|
|
SMART_DAT(0x01),
|
|
SMART_DAT(0x3F),
|
|
|
|
/* wait for vsync cmd before transferring frame data */
|
|
SMART_CMD_WAIT_FOR_VSYNC,
|
|
|
|
/* write ram */
|
|
SMART_CMD(0x00),
|
|
SMART_CMD(0x22),
|
|
|
|
/* write frame data */
|
|
SMART_CMD_WRITE_FRAME,
|
|
};
|
|
|
|
static void ltm022a97a_lcd_power(int on, struct fb_var_screeninfo *var)
|
|
{
|
|
static int pin_requested = 0;
|
|
struct fb_info *info = container_of(var, struct fb_info, var);
|
|
int err;
|
|
|
|
if (!pin_requested) {
|
|
err = gpio_request(GPIO_LCD_RESET, "lcd reset");
|
|
if (err) {
|
|
pr_err("failed to request gpio for LCD reset\n");
|
|
return;
|
|
}
|
|
|
|
gpio_direction_output(GPIO_LCD_RESET, 0);
|
|
pin_requested = 1;
|
|
}
|
|
|
|
if (on) {
|
|
gpio_set_value(GPIO_LCD_RESET, 0); msleep(100);
|
|
gpio_set_value(GPIO_LCD_RESET, 1); msleep(10);
|
|
|
|
pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_on));
|
|
pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_on));
|
|
} else {
|
|
pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_panel_off));
|
|
pxafb_smart_queue(info, ARRAY_AND_SIZE(lcd_power_off));
|
|
}
|
|
|
|
err = pxafb_smart_flush(info);
|
|
if (err)
|
|
pr_err("%s: timed out\n", __func__);
|
|
}
|
|
|
|
static void ltm022a97a_update(struct fb_info *info)
|
|
{
|
|
pxafb_smart_queue(info, ARRAY_AND_SIZE(update_framedata));
|
|
pxafb_smart_flush(info);
|
|
}
|
|
|
|
static struct pxafb_mode_info toshiba_ltm022a97a_modes[] = {
|
|
[0] = {
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.a0csrd_set_hld = 30,
|
|
.a0cswr_set_hld = 30,
|
|
.wr_pulse_width = 30,
|
|
.rd_pulse_width = 30,
|
|
.op_hold_time = 30,
|
|
.cmd_inh_time = 60,
|
|
|
|
/* L_LCLK_A0 and L_LCLK_RD active low */
|
|
.sync = FB_SYNC_HOR_HIGH_ACT |
|
|
FB_SYNC_VERT_HIGH_ACT,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info saar_lcd_info = {
|
|
.modes = toshiba_ltm022a97a_modes,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_SMART_PANEL_8BPP | LCD_PCLK_EDGE_FALL,
|
|
.pxafb_lcd_power = ltm022a97a_lcd_power,
|
|
.smart_update = ltm022a97a_update,
|
|
};
|
|
|
|
static void __init saar_init_lcd(void)
|
|
{
|
|
set_pxa_fb_info(&saar_lcd_info);
|
|
}
|
|
#else
|
|
static inline void saar_init_lcd(void) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
|
|
static struct da903x_subdev_info saar_da9034_subdevs[] = {
|
|
[0] = {
|
|
.name = "da903x-backlight",
|
|
.id = DA9034_ID_WLED,
|
|
},
|
|
};
|
|
|
|
static struct da903x_platform_data saar_da9034_info = {
|
|
.num_subdevs = ARRAY_SIZE(saar_da9034_subdevs),
|
|
.subdevs = saar_da9034_subdevs,
|
|
};
|
|
|
|
static struct i2c_board_info saar_i2c_info[] = {
|
|
[0] = {
|
|
.type = "da9034",
|
|
.addr = 0x34,
|
|
.platform_data = &saar_da9034_info,
|
|
.irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
|
|
},
|
|
};
|
|
|
|
static void __init saar_init_i2c(void)
|
|
{
|
|
pxa_set_i2c_info(NULL);
|
|
i2c_register_board_info(0, ARRAY_AND_SIZE(saar_i2c_info));
|
|
}
|
|
#else
|
|
static inline void saar_init_i2c(void) {}
|
|
#endif
|
|
static void __init saar_init(void)
|
|
{
|
|
/* initialize MFP configurations */
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
|
|
|
|
platform_device_register(&smc91x_device);
|
|
|
|
saar_init_i2c();
|
|
saar_init_lcd();
|
|
}
|
|
|
|
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
|
|
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
|
|
.phys_io = 0x40000000,
|
|
.boot_params = 0xa0000100,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa3xx_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = saar_init,
|
|
MACHINE_END
|