mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 23:14:31 +08:00
3b5f7f10ff
Sometimes we would get the following flow when doing an i2cset: 0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4 I2C_SLAVE_WRITE_RECEIVED 0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204 I2C_SLAVE_WRITE_REQUESTED I2C_SLAVE_WRITE_RECEIVED Documentation/i2c/slave-interface.rst says that I2C_SLAVE_WRITE_REQUESTED, which is mandatory, should be sent while the data did not arrive yet. It means in a write-request I2C_SLAVE_WRITE_REQUESTED should be reported before any I2C_SLAVE_WRITE_RECEIVED. By the way, I2C_SLAVE_STOP didn't be reported in the above case because DW_IC_INTR_STAT was not 0x200. dev->status can be used to record the current state, especially Designware I2C controller has no interrupts to identify a write-request. This patch makes not only I2C_SLAVE_WRITE_REQUESTED been reported first when IC_INTR_RX_FULL is rising and dev->status isn't STATUS_WRITE_IN_PROGRESS but also I2C_SLAVE_STOP been reported when a STOP condition is received. Signed-off-by: Michael Wu <michael.wu@vatics.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org> |
||
|---|---|---|
| .. | ||
| algos | ||
| busses | ||
| muxes | ||
| i2c-boardinfo.c | ||
| i2c-core-acpi.c | ||
| i2c-core-base.c | ||
| i2c-core-of.c | ||
| i2c-core-slave.c | ||
| i2c-core-smbus.c | ||
| i2c-core.h | ||
| i2c-dev.c | ||
| i2c-mux.c | ||
| i2c-slave-eeprom.c | ||
| i2c-slave-testunit.c | ||
| i2c-smbus.c | ||
| i2c-stub.c | ||
| Kconfig | ||
| Makefile | ||