linux/arch/blackfin/mach-bf561/smp.c
KOSAKI Motohiro 3cb8a39fa6 Blackfin: don't touch cpu_possible_map and cpu_present_map directly
We plan to remove cpu_possible_map and cpu_present_map later and we
have proper init_cpu_possible() and init_cpu_present() APIs.

Therefore this patch rewrites platform_init_cpus and platform_prepare_cpus
by their APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25 08:24:10 -04:00

173 lines
4.2 KiB
C

/*
* Copyright 2007-2009 Analog Devices Inc.
* Philippe Gerum <rpm@xenomai.org>
*
* Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <asm/smp.h>
#include <asm/dma.h>
#include <asm/time.h>
static DEFINE_SPINLOCK(boot_lock);
/*
* platform_init_cpus() - Tell the world about how many cores we
* have. This is called while setting up the architecture support
* (setup_arch()), so don't be too demanding here with respect to
* available kernel services.
*/
void __init platform_init_cpus(void)
{
struct cpumask mask;
cpumask_set_cpu(0, &mask); /* CoreA */
cpumask_set_cpu(1, &mask); /* CoreB */
init_cpu_possible(&mask);
}
void __init platform_prepare_cpus(unsigned int max_cpus)
{
struct cpumask mask;
bfin_relocate_coreb_l1_mem();
/* Both cores ought to be present on a bf561! */
cpumask_set_cpu(0, &mask); /* CoreA */
cpumask_set_cpu(1, &mask); /* CoreB */
init_cpu_present(&mask);
}
int __init setup_profiling_timer(unsigned int multiplier) /* not supported */
{
return -EINVAL;
}
void __cpuinit platform_secondary_init(unsigned int cpu)
{
/* Clone setup for peripheral interrupt sources from CoreA. */
bfin_write_SICB_IMASK0(bfin_read_SIC_IMASK0());
bfin_write_SICB_IMASK1(bfin_read_SIC_IMASK1());
SSYNC();
/* Clone setup for IARs from CoreA. */
bfin_write_SICB_IAR0(bfin_read_SIC_IAR0());
bfin_write_SICB_IAR1(bfin_read_SIC_IAR1());
bfin_write_SICB_IAR2(bfin_read_SIC_IAR2());
bfin_write_SICB_IAR3(bfin_read_SIC_IAR3());
bfin_write_SICB_IAR4(bfin_read_SIC_IAR4());
bfin_write_SICB_IAR5(bfin_read_SIC_IAR5());
bfin_write_SICB_IAR6(bfin_read_SIC_IAR6());
bfin_write_SICB_IAR7(bfin_read_SIC_IAR7());
bfin_write_SICB_IWR0(IWR_DISABLE_ALL);
bfin_write_SICB_IWR1(IWR_DISABLE_ALL);
SSYNC();
/* We are done with local CPU inits, unblock the boot CPU. */
set_cpu_online(cpu, true);
spin_lock(&boot_lock);
spin_unlock(&boot_lock);
}
int __cpuinit platform_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
printk(KERN_INFO "Booting Core B.\n");
spin_lock(&boot_lock);
if ((bfin_read_SYSCR() & COREB_SRAM_INIT) == 0) {
/* CoreB already running, sending ipi to wakeup it */
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0);
} else {
/* Kick CoreB, which should start execution from CORE_SRAM_BASE. */
bfin_write_SYSCR(bfin_read_SYSCR() & ~COREB_SRAM_INIT);
SSYNC();
}
timeout = jiffies + 1 * HZ;
while (time_before(jiffies, timeout)) {
if (cpu_online(cpu))
break;
udelay(100);
barrier();
}
if (cpu_online(cpu)) {
/* release the lock and let coreb run */
spin_unlock(&boot_lock);
return 0;
} else
panic("CPU%u: processor failed to boot\n", cpu);
}
static const char supple0[] = "IRQ_SUPPLE_0";
static const char supple1[] = "IRQ_SUPPLE_1";
void __init platform_request_ipi(int irq, void *handler)
{
int ret;
const char *name = (irq == IRQ_SUPPLE_0) ? supple0 : supple1;
ret = request_irq(irq, handler, IRQF_DISABLED | IRQF_PERCPU, name, handler);
if (ret)
panic("Cannot request %s for IPI service", name);
}
void platform_send_ipi(cpumask_t callmap, int irq)
{
unsigned int cpu;
int offset = (irq == IRQ_SUPPLE_0) ? 6 : 8;
for_each_cpu_mask(cpu, callmap) {
BUG_ON(cpu >= 2);
SSYNC();
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu)));
SSYNC();
}
}
void platform_send_ipi_cpu(unsigned int cpu, int irq)
{
int offset = (irq == IRQ_SUPPLE_0) ? 6 : 8;
BUG_ON(cpu >= 2);
SSYNC();
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu)));
SSYNC();
}
void platform_clear_ipi(unsigned int cpu, int irq)
{
int offset = (irq == IRQ_SUPPLE_0) ? 10 : 12;
BUG_ON(cpu >= 2);
SSYNC();
bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | (1 << (offset + cpu)));
SSYNC();
}
/*
* Setup core B's local core timer.
* In SMP, core timer is used for clock event device.
*/
void __cpuinit bfin_local_timer_setup(void)
{
#if defined(CONFIG_TICKSOURCE_CORETMR)
struct irq_data *data = irq_get_irq_data(IRQ_CORETMR);
struct irq_chip *chip = irq_data_get_irq_chip(data);
bfin_coretmr_init();
bfin_coretmr_clockevent_init();
chip->irq_unmask(data);
#else
/* Power down the core timer, just to play safe. */
bfin_write_TCNTL(0);
#endif
}