mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 20:14:25 +08:00
06608bc2d9
For the CRC PMIC we end up with multiple irq-domains with the same fwnode. One for the irqchip which demultiplexes the actual PMIC interrupt into interrupts for the various cells (known as the level 1 interrupts); And 2 more for the irqchips which are part of the crystal_cove_gpio and crystal_cove_charger cells. This leads to the following error being printed when CONFIG_GENERIC_IRQ_DEBUGFS is enabled: debugfs: File '\_SB.I2C7.PMIC' in directory 'domains' already present! Set the bus token of the main IRQ domain to DOMAIN_BUS_WIRED to avoid this error, this also allows irq_find_matching_fwspec() to find the right domain if necessary. Note all 3 domain registering drivers need to set the IRQ domain bus token. This is necessary because the IRQ domain code defaults to creating the debugfs dir with just the fwnode name and then renames it when the bus token is set. So each one starts with the same default name and all 3 must be given a different name to avoid problems when one of the other drivers loads and starts with the same default name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
394 lines
9.5 KiB
C
394 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Intel Crystal Cove GPIO Driver
|
|
*
|
|
* Copyright (C) 2012, 2014 Intel Corporation. All rights reserved.
|
|
*
|
|
* Author: Yang, Bin <bin.yang@intel.com>
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/intel_soc_pmic.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/seq_file.h>
|
|
|
|
#define CRYSTALCOVE_GPIO_NUM 16
|
|
#define CRYSTALCOVE_VGPIO_NUM 95
|
|
|
|
#define UPDATE_IRQ_TYPE BIT(0)
|
|
#define UPDATE_IRQ_MASK BIT(1)
|
|
|
|
#define GPIO0IRQ 0x0b
|
|
#define GPIO1IRQ 0x0c
|
|
#define MGPIO0IRQS0 0x19
|
|
#define MGPIO1IRQS0 0x1a
|
|
#define MGPIO0IRQSX 0x1b
|
|
#define MGPIO1IRQSX 0x1c
|
|
#define GPIO0P0CTLO 0x2b
|
|
#define GPIO0P0CTLI 0x33
|
|
#define GPIO1P0CTLO 0x3b
|
|
#define GPIO1P0CTLI 0x43
|
|
#define GPIOPANELCTL 0x52
|
|
|
|
#define CTLI_INTCNT_DIS (0)
|
|
#define CTLI_INTCNT_NE (1 << 1)
|
|
#define CTLI_INTCNT_PE (2 << 1)
|
|
#define CTLI_INTCNT_BE (3 << 1)
|
|
|
|
#define CTLO_DIR_IN (0)
|
|
#define CTLO_DIR_OUT (1 << 5)
|
|
|
|
#define CTLO_DRV_CMOS (0)
|
|
#define CTLO_DRV_OD (1 << 4)
|
|
|
|
#define CTLO_DRV_REN (1 << 3)
|
|
|
|
#define CTLO_RVAL_2KDW (0)
|
|
#define CTLO_RVAL_2KUP (1 << 1)
|
|
#define CTLO_RVAL_50KDW (2 << 1)
|
|
#define CTLO_RVAL_50KUP (3 << 1)
|
|
|
|
#define CTLO_INPUT_SET (CTLO_DRV_CMOS | CTLO_DRV_REN | CTLO_RVAL_2KUP)
|
|
#define CTLO_OUTPUT_SET (CTLO_DIR_OUT | CTLO_INPUT_SET)
|
|
|
|
enum ctrl_register {
|
|
CTRL_IN,
|
|
CTRL_OUT,
|
|
};
|
|
|
|
/**
|
|
* struct crystalcove_gpio - Crystal Cove GPIO controller
|
|
* @buslock: for bus lock/sync and unlock.
|
|
* @chip: the abstract gpio_chip structure.
|
|
* @regmap: the regmap from the parent device.
|
|
* @update: pending IRQ setting update, to be written to the chip upon unlock.
|
|
* @intcnt_value: the Interrupt Detect value to be written.
|
|
* @set_irq_mask: true if the IRQ mask needs to be set, false to clear.
|
|
*/
|
|
struct crystalcove_gpio {
|
|
struct mutex buslock; /* irq_bus_lock */
|
|
struct gpio_chip chip;
|
|
struct regmap *regmap;
|
|
int update;
|
|
int intcnt_value;
|
|
bool set_irq_mask;
|
|
};
|
|
|
|
static inline int to_reg(int gpio, enum ctrl_register reg_type)
|
|
{
|
|
int reg;
|
|
|
|
if (gpio >= CRYSTALCOVE_GPIO_NUM) {
|
|
/*
|
|
* Virtual GPIO called from ACPI, for now we only support
|
|
* the panel ctl.
|
|
*/
|
|
switch (gpio) {
|
|
case 0x5e:
|
|
return GPIOPANELCTL;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
if (reg_type == CTRL_IN) {
|
|
if (gpio < 8)
|
|
reg = GPIO0P0CTLI;
|
|
else
|
|
reg = GPIO1P0CTLI;
|
|
} else {
|
|
if (gpio < 8)
|
|
reg = GPIO0P0CTLO;
|
|
else
|
|
reg = GPIO1P0CTLO;
|
|
}
|
|
|
|
return reg + gpio % 8;
|
|
}
|
|
|
|
static void crystalcove_update_irq_mask(struct crystalcove_gpio *cg,
|
|
int gpio)
|
|
{
|
|
u8 mirqs0 = gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0;
|
|
int mask = BIT(gpio % 8);
|
|
|
|
if (cg->set_irq_mask)
|
|
regmap_update_bits(cg->regmap, mirqs0, mask, mask);
|
|
else
|
|
regmap_update_bits(cg->regmap, mirqs0, mask, 0);
|
|
}
|
|
|
|
static void crystalcove_update_irq_ctrl(struct crystalcove_gpio *cg, int gpio)
|
|
{
|
|
int reg = to_reg(gpio, CTRL_IN);
|
|
|
|
regmap_update_bits(cg->regmap, reg, CTLI_INTCNT_BE, cg->intcnt_value);
|
|
}
|
|
|
|
static int crystalcove_gpio_dir_in(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct crystalcove_gpio *cg = gpiochip_get_data(chip);
|
|
int reg = to_reg(gpio, CTRL_OUT);
|
|
|
|
if (reg < 0)
|
|
return 0;
|
|
|
|
return regmap_write(cg->regmap, reg, CTLO_INPUT_SET);
|
|
}
|
|
|
|
static int crystalcove_gpio_dir_out(struct gpio_chip *chip, unsigned int gpio,
|
|
int value)
|
|
{
|
|
struct crystalcove_gpio *cg = gpiochip_get_data(chip);
|
|
int reg = to_reg(gpio, CTRL_OUT);
|
|
|
|
if (reg < 0)
|
|
return 0;
|
|
|
|
return regmap_write(cg->regmap, reg, CTLO_OUTPUT_SET | value);
|
|
}
|
|
|
|
static int crystalcove_gpio_get(struct gpio_chip *chip, unsigned int gpio)
|
|
{
|
|
struct crystalcove_gpio *cg = gpiochip_get_data(chip);
|
|
unsigned int val;
|
|
int ret, reg = to_reg(gpio, CTRL_IN);
|
|
|
|
if (reg < 0)
|
|
return 0;
|
|
|
|
ret = regmap_read(cg->regmap, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return val & 0x1;
|
|
}
|
|
|
|
static void crystalcove_gpio_set(struct gpio_chip *chip,
|
|
unsigned int gpio, int value)
|
|
{
|
|
struct crystalcove_gpio *cg = gpiochip_get_data(chip);
|
|
int reg = to_reg(gpio, CTRL_OUT);
|
|
|
|
if (reg < 0)
|
|
return;
|
|
|
|
if (value)
|
|
regmap_update_bits(cg->regmap, reg, 1, 1);
|
|
else
|
|
regmap_update_bits(cg->regmap, reg, 1, 0);
|
|
}
|
|
|
|
static int crystalcove_irq_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct crystalcove_gpio *cg =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
|
|
if (data->hwirq >= CRYSTALCOVE_GPIO_NUM)
|
|
return 0;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_NONE:
|
|
cg->intcnt_value = CTLI_INTCNT_DIS;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
cg->intcnt_value = CTLI_INTCNT_BE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
cg->intcnt_value = CTLI_INTCNT_PE;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
cg->intcnt_value = CTLI_INTCNT_NE;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
cg->update |= UPDATE_IRQ_TYPE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void crystalcove_bus_lock(struct irq_data *data)
|
|
{
|
|
struct crystalcove_gpio *cg =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
|
|
mutex_lock(&cg->buslock);
|
|
}
|
|
|
|
static void crystalcove_bus_sync_unlock(struct irq_data *data)
|
|
{
|
|
struct crystalcove_gpio *cg =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
int gpio = data->hwirq;
|
|
|
|
if (cg->update & UPDATE_IRQ_TYPE)
|
|
crystalcove_update_irq_ctrl(cg, gpio);
|
|
if (cg->update & UPDATE_IRQ_MASK)
|
|
crystalcove_update_irq_mask(cg, gpio);
|
|
cg->update = 0;
|
|
|
|
mutex_unlock(&cg->buslock);
|
|
}
|
|
|
|
static void crystalcove_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct crystalcove_gpio *cg =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
|
|
if (data->hwirq < CRYSTALCOVE_GPIO_NUM) {
|
|
cg->set_irq_mask = false;
|
|
cg->update |= UPDATE_IRQ_MASK;
|
|
}
|
|
}
|
|
|
|
static void crystalcove_irq_mask(struct irq_data *data)
|
|
{
|
|
struct crystalcove_gpio *cg =
|
|
gpiochip_get_data(irq_data_get_irq_chip_data(data));
|
|
|
|
if (data->hwirq < CRYSTALCOVE_GPIO_NUM) {
|
|
cg->set_irq_mask = true;
|
|
cg->update |= UPDATE_IRQ_MASK;
|
|
}
|
|
}
|
|
|
|
static struct irq_chip crystalcove_irqchip = {
|
|
.name = "Crystal Cove",
|
|
.irq_mask = crystalcove_irq_mask,
|
|
.irq_unmask = crystalcove_irq_unmask,
|
|
.irq_set_type = crystalcove_irq_type,
|
|
.irq_bus_lock = crystalcove_bus_lock,
|
|
.irq_bus_sync_unlock = crystalcove_bus_sync_unlock,
|
|
.flags = IRQCHIP_SKIP_SET_WAKE,
|
|
};
|
|
|
|
static irqreturn_t crystalcove_gpio_irq_handler(int irq, void *data)
|
|
{
|
|
struct crystalcove_gpio *cg = data;
|
|
unsigned long pending;
|
|
unsigned int p0, p1;
|
|
int gpio;
|
|
unsigned int virq;
|
|
|
|
if (regmap_read(cg->regmap, GPIO0IRQ, &p0) ||
|
|
regmap_read(cg->regmap, GPIO1IRQ, &p1))
|
|
return IRQ_NONE;
|
|
|
|
regmap_write(cg->regmap, GPIO0IRQ, p0);
|
|
regmap_write(cg->regmap, GPIO1IRQ, p1);
|
|
|
|
pending = p0 | p1 << 8;
|
|
|
|
for_each_set_bit(gpio, &pending, CRYSTALCOVE_GPIO_NUM) {
|
|
virq = irq_find_mapping(cg->chip.irq.domain, gpio);
|
|
handle_nested_irq(virq);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void crystalcove_gpio_dbg_show(struct seq_file *s,
|
|
struct gpio_chip *chip)
|
|
{
|
|
struct crystalcove_gpio *cg = gpiochip_get_data(chip);
|
|
int gpio, offset;
|
|
unsigned int ctlo, ctli, mirqs0, mirqsx, irq;
|
|
|
|
for (gpio = 0; gpio < CRYSTALCOVE_GPIO_NUM; gpio++) {
|
|
regmap_read(cg->regmap, to_reg(gpio, CTRL_OUT), &ctlo);
|
|
regmap_read(cg->regmap, to_reg(gpio, CTRL_IN), &ctli);
|
|
regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQS0 : MGPIO1IRQS0,
|
|
&mirqs0);
|
|
regmap_read(cg->regmap, gpio < 8 ? MGPIO0IRQSX : MGPIO1IRQSX,
|
|
&mirqsx);
|
|
regmap_read(cg->regmap, gpio < 8 ? GPIO0IRQ : GPIO1IRQ,
|
|
&irq);
|
|
|
|
offset = gpio % 8;
|
|
seq_printf(s, " gpio-%-2d %s %s %s %s ctlo=%2x,%s %s %s\n",
|
|
gpio, ctlo & CTLO_DIR_OUT ? "out" : "in ",
|
|
ctli & 0x1 ? "hi" : "lo",
|
|
ctli & CTLI_INTCNT_NE ? "fall" : " ",
|
|
ctli & CTLI_INTCNT_PE ? "rise" : " ",
|
|
ctlo,
|
|
mirqs0 & BIT(offset) ? "s0 mask " : "s0 unmask",
|
|
mirqsx & BIT(offset) ? "sx mask " : "sx unmask",
|
|
irq & BIT(offset) ? "pending" : " ");
|
|
}
|
|
}
|
|
|
|
static int crystalcove_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
int irq = platform_get_irq(pdev, 0);
|
|
struct crystalcove_gpio *cg;
|
|
int retval;
|
|
struct device *dev = pdev->dev.parent;
|
|
struct intel_soc_pmic *pmic = dev_get_drvdata(dev);
|
|
struct gpio_irq_chip *girq;
|
|
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
cg = devm_kzalloc(&pdev->dev, sizeof(*cg), GFP_KERNEL);
|
|
if (!cg)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&cg->buslock);
|
|
cg->chip.label = KBUILD_MODNAME;
|
|
cg->chip.direction_input = crystalcove_gpio_dir_in;
|
|
cg->chip.direction_output = crystalcove_gpio_dir_out;
|
|
cg->chip.get = crystalcove_gpio_get;
|
|
cg->chip.set = crystalcove_gpio_set;
|
|
cg->chip.base = -1;
|
|
cg->chip.ngpio = CRYSTALCOVE_VGPIO_NUM;
|
|
cg->chip.can_sleep = true;
|
|
cg->chip.parent = dev;
|
|
cg->chip.dbg_show = crystalcove_gpio_dbg_show;
|
|
cg->regmap = pmic->regmap;
|
|
|
|
girq = &cg->chip.irq;
|
|
girq->chip = &crystalcove_irqchip;
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_simple_irq;
|
|
girq->threaded = true;
|
|
|
|
retval = devm_request_threaded_irq(&pdev->dev, irq, NULL,
|
|
crystalcove_gpio_irq_handler,
|
|
IRQF_ONESHOT, KBUILD_MODNAME, cg);
|
|
if (retval) {
|
|
dev_warn(&pdev->dev, "request irq failed: %d\n", retval);
|
|
return retval;
|
|
}
|
|
|
|
retval = devm_gpiochip_add_data(&pdev->dev, &cg->chip, cg);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/* Distuingish IRQ domain from others sharing (MFD) the same fwnode */
|
|
irq_domain_update_bus_token(cg->chip.irq.domain, DOMAIN_BUS_WIRED);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver crystalcove_gpio_driver = {
|
|
.probe = crystalcove_gpio_probe,
|
|
.driver = {
|
|
.name = "crystal_cove_gpio",
|
|
},
|
|
};
|
|
module_platform_driver(crystalcove_gpio_driver);
|
|
|
|
MODULE_AUTHOR("Yang, Bin <bin.yang@intel.com>");
|
|
MODULE_DESCRIPTION("Intel Crystal Cove GPIO Driver");
|
|
MODULE_LICENSE("GPL v2");
|