mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
14c4dc8bb6
The big one here is we finally have Paul Cercueil's (and others) DMA buffer support for IIO devices enabling high speed zero copy transfer of data to and from sensors supported by IIO (and for example USB). This should aid with upstream support of a range of higher performance ADCs and DACs. Two merges from other trees - spi/spi_devm_optimize used for simplification in ad7944. - dmaengine/topic_dma_vec to enable the DMABUF series. One feature with impact outside IIO. - Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases. New device support ================== adi,ad7173 - Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo differential ADCs. Major driver rework was needed to enabled these. adi,ad7944 - Use devm_spi_optimize_message() to avoid a local devm cleanup callback. This is the example case from the patch set, others will follow. mediatek,mt6359-auxadc - New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs. st,accel - Add support for the LIS2DS12 accelerometer ti,ads1119 - New driver for this 16 bit 2-differential or 4-single ended channel ADC. Features ======== dt-bindings - Introduce new common-mode-channel property to help handle pseudo differential ADCs where we have something that looks like one side of differential input, but which is only suited for use with a slow moving reference. adi,adf4350 - Support use as a clock provider. iio-hmwon - Support reading of labels from IIO devices by their consumers and use this in the hwmon bridge. Cleanup and minor fixes ======================= Treewide - Use regmap_clear_bits() / regmap_set_bits() to simplify open coded equivalents. - Use devm_regulator_get_enable_read_voltage() to replace equivalent opencoded boilerplate. In some cases enabled complete conversion to devm handling and removal of explicit remove() callbacks. - Introduce dev_err_ptr_probe() and other variants and make use of of them in a couple of examples driver cleanups. Will find use in many more drivers soon. adi,ad7192 - Introduce local struct device *dev and use dev_err_probe() to give more readable code. adi,adi-axi-adc/dac - Improved consistency of messages using dev_err_probe() adi,adis - Split the trigger handling into cases that needed paging and those that don't resulting in more readable code. - Use cleanup.h to simplify error paths via scoped cleanup. - Add adis specific lock helpers and make use of them in a number of drivers. adi,ad7192 - Update maintainer (Alisa-Dariana Roman) adi,ad7606 - dt-binding cleanup. avago,apds9306 - Add a maintainer entry (Subhajit Ghosh) linear,ltc2309 - Fix a wrong endian type. st,stm32-dfsdm - Fix a missing port property in the dt-binding. st,sensors - Relax whoami match failure to a warning print rather than probe failure. This enables fallback compatibles to existing parts from those that don't necessarily even exit yet. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmaEXkQRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FojAVBAAnaPB1CCyh61JkMQx815wn87looa+JRi3 v8J/NsM64gYEwG6aNLLxrHAMFECw4GVrL4rHA5bCJFlSYioSKgs0VB7ltOJ/2258 CsnSxgJ+4fN0468oZz63WuvrmxBsLGbPRGdE/6pkLMJiGHC0Bb/v3ngrJ/LUbAt6 j0zAFZ2lb5+iuM8MW5vUE0AcwoQakZEg75N4jD6vHSiLvk6dAduj+R8k6z4OlER9 MaotfjIqYieQ/4SplMcJEd63IxodKjBJacZHFu7uN8d7VWkDhNPyPrJ388GoeXP6 CK1cTQWO7ZD2yCdY5LjXJYCAejgtiCIMtM7ghe0ZU/OuDBOFgmoaHrmi48pceF9o h8KeOsZIa9oF8SSZuKROTQWAwh33F6elf+IoUWYp61hJwft1BQF060rTsGfm7Qq5 bFOPwMn+BJASC3ARtjNAI/posdAyS4Tb7fBBsDZ9bMW1Y02X/jlhDvDby1WNAcSY LEttjsA/naCfquXy4ng+T9sNB+sy2x92FwgEv1Z9MrnMKp5T+mX6XWQ/xhHplGGa VAohB/31EatglJqPS0U9mLr1cmUsBS7ItHG9bDB5mOE9wQA5yAqhEqTbe2P3sWWO OW43UVaS1VTd10XbY3l0Jjpwe3qsMZNt6M+JaCSizUCLQiEc0h06THcB/xgxdbad sTmopNgIR3Y= =+9tp -----END PGP SIGNATURE----- Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: IIO: 2nd set of new device support, features and cleanup for 6.11 The big one here is we finally have Paul Cercueil's (and others) DMA buffer support for IIO devices enabling high speed zero copy transfer of data to and from sensors supported by IIO (and for example USB). This should aid with upstream support of a range of higher performance ADCs and DACs. Two merges from other trees - spi/spi_devm_optimize used for simplification in ad7944. - dmaengine/topic_dma_vec to enable the DMABUF series. One feature with impact outside IIO. - Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases. New device support ================== adi,ad7173 - Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo differential ADCs. Major driver rework was needed to enabled these. adi,ad7944 - Use devm_spi_optimize_message() to avoid a local devm cleanup callback. This is the example case from the patch set, others will follow. mediatek,mt6359-auxadc - New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs. st,accel - Add support for the LIS2DS12 accelerometer ti,ads1119 - New driver for this 16 bit 2-differential or 4-single ended channel ADC. Features ======== dt-bindings - Introduce new common-mode-channel property to help handle pseudo differential ADCs where we have something that looks like one side of differential input, but which is only suited for use with a slow moving reference. adi,adf4350 - Support use as a clock provider. iio-hmwon - Support reading of labels from IIO devices by their consumers and use this in the hwmon bridge. Cleanup and minor fixes ======================= Treewide - Use regmap_clear_bits() / regmap_set_bits() to simplify open coded equivalents. - Use devm_regulator_get_enable_read_voltage() to replace equivalent opencoded boilerplate. In some cases enabled complete conversion to devm handling and removal of explicit remove() callbacks. - Introduce dev_err_ptr_probe() and other variants and make use of of them in a couple of examples driver cleanups. Will find use in many more drivers soon. adi,ad7192 - Introduce local struct device *dev and use dev_err_probe() to give more readable code. adi,adi-axi-adc/dac - Improved consistency of messages using dev_err_probe() adi,adis - Split the trigger handling into cases that needed paging and those that don't resulting in more readable code. - Use cleanup.h to simplify error paths via scoped cleanup. - Add adis specific lock helpers and make use of them in a number of drivers. adi,ad7192 - Update maintainer (Alisa-Dariana Roman) adi,ad7606 - dt-binding cleanup. avago,apds9306 - Add a maintainer entry (Subhajit Ghosh) linear,ltc2309 - Fix a wrong endian type. st,stm32-dfsdm - Fix a missing port property in the dt-binding. st,sensors - Relax whoami match failure to a warning print rather than probe failure. This enables fallback compatibles to existing parts from those that don't necessarily even exit yet. * tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits) iio: adc: ad7173: Fix uninitialized symbol is_current_chan iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC math.h: Add unsigned 8 bits fractional numbers type dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC iio: common: scmi_iio: convert to dev_err_probe() iio: backend: make use of dev_err_cast_probe() iio: temperature: ltc2983: convert to dev_err_probe() dev_printk: add new dev_err_probe() helpers iio: xilinx-ams: Add labels iio: adc: ad7944: use devm_spi_optimize_message() Documentation: iio: Document high-speed DMABUF based API iio: buffer-dmaengine: Support new DMABUF based userspace API iio: buffer-dma: Enable support for DMABUFs iio: core: Add new DMABUF interface infrastructure MAINTAINERS: Update AD7192 driver maintainer iio: adc: ad7192: use devm_regulator_get_enable_read_voltage iio: st_sensors: relax WhoAmI check in st_sensors_verify_id() MAINTAINERS: Add AVAGO APDS9306 dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names dt-bindings: iio: adc: adi,ad7606: add missing datasheet link ... |
||
|---|---|---|
| .. | ||
| adis16201.c | ||
| adis16209.c | ||
| adxl313_core.c | ||
| adxl313_i2c.c | ||
| adxl313_spi.c | ||
| adxl313.h | ||
| adxl345_core.c | ||
| adxl345_i2c.c | ||
| adxl345_spi.c | ||
| adxl345.h | ||
| adxl355_core.c | ||
| adxl355_i2c.c | ||
| adxl355_spi.c | ||
| adxl355.h | ||
| adxl367_i2c.c | ||
| adxl367_spi.c | ||
| adxl367.c | ||
| adxl367.h | ||
| adxl372_i2c.c | ||
| adxl372_spi.c | ||
| adxl372.c | ||
| adxl372.h | ||
| bma180.c | ||
| bma220_spi.c | ||
| bma400_core.c | ||
| bma400_i2c.c | ||
| bma400_spi.c | ||
| bma400.h | ||
| bmc150-accel-core.c | ||
| bmc150-accel-i2c.c | ||
| bmc150-accel-spi.c | ||
| bmc150-accel.h | ||
| bmi088-accel-core.c | ||
| bmi088-accel-i2c.c | ||
| bmi088-accel-spi.c | ||
| bmi088-accel.h | ||
| cros_ec_accel_legacy.c | ||
| da280.c | ||
| da311.c | ||
| dmard06.c | ||
| dmard09.c | ||
| dmard10.c | ||
| fxls8962af-core.c | ||
| fxls8962af-i2c.c | ||
| fxls8962af-spi.c | ||
| fxls8962af.h | ||
| hid-sensor-accel-3d.c | ||
| Kconfig | ||
| kionix-kx022a-i2c.c | ||
| kionix-kx022a-spi.c | ||
| kionix-kx022a.c | ||
| kionix-kx022a.h | ||
| kxcjk-1013.c | ||
| kxsd9-i2c.c | ||
| kxsd9-spi.c | ||
| kxsd9.c | ||
| kxsd9.h | ||
| Makefile | ||
| mc3230.c | ||
| mma7455_core.c | ||
| mma7455_i2c.c | ||
| mma7455_spi.c | ||
| mma7455.h | ||
| mma7660.c | ||
| mma8452.c | ||
| mma9551_core.c | ||
| mma9551_core.h | ||
| mma9551.c | ||
| mma9553.c | ||
| msa311.c | ||
| mxc4005.c | ||
| mxc6255.c | ||
| sca3000.c | ||
| sca3300.c | ||
| ssp_accel_sensor.c | ||
| st_accel_buffer.c | ||
| st_accel_core.c | ||
| st_accel_i2c.c | ||
| st_accel_spi.c | ||
| st_accel.h | ||
| stk8ba50.c | ||
| stk8312.c | ||