mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
ad0eaee619
Add missing break statement in order to prevent the code from falling through to the default case. Addresses-Coverity-ID: 115050 ("Missing break in switch") Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
4525 lines
129 KiB
C
4525 lines
129 KiB
C
/*
|
|
* wm8994.c -- WM8994 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2009-12 Wolfson Microelectronics plc
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/gcd.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/jack.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
#include <trace/events/asoc.h>
|
|
|
|
#include <linux/mfd/wm8994/core.h>
|
|
#include <linux/mfd/wm8994/registers.h>
|
|
#include <linux/mfd/wm8994/pdata.h>
|
|
#include <linux/mfd/wm8994/gpio.h>
|
|
|
|
#include "wm8994.h"
|
|
#include "wm_hubs.h"
|
|
|
|
#define WM1811_JACKDET_MODE_NONE 0x0000
|
|
#define WM1811_JACKDET_MODE_JACK 0x0100
|
|
#define WM1811_JACKDET_MODE_MIC 0x0080
|
|
#define WM1811_JACKDET_MODE_AUDIO 0x0180
|
|
|
|
#define WM8994_NUM_DRC 3
|
|
#define WM8994_NUM_EQ 3
|
|
|
|
static struct {
|
|
unsigned int reg;
|
|
unsigned int mask;
|
|
} wm8994_vu_bits[] = {
|
|
{ WM8994_LEFT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
|
|
{ WM8994_RIGHT_LINE_INPUT_1_2_VOLUME, WM8994_IN1_VU },
|
|
{ WM8994_LEFT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
|
|
{ WM8994_RIGHT_LINE_INPUT_3_4_VOLUME, WM8994_IN2_VU },
|
|
{ WM8994_SPEAKER_VOLUME_LEFT, WM8994_SPKOUT_VU },
|
|
{ WM8994_SPEAKER_VOLUME_RIGHT, WM8994_SPKOUT_VU },
|
|
{ WM8994_LEFT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
|
|
{ WM8994_RIGHT_OUTPUT_VOLUME, WM8994_HPOUT1_VU },
|
|
{ WM8994_LEFT_OPGA_VOLUME, WM8994_MIXOUT_VU },
|
|
{ WM8994_RIGHT_OPGA_VOLUME, WM8994_MIXOUT_VU },
|
|
|
|
{ WM8994_AIF1_DAC1_LEFT_VOLUME, WM8994_AIF1DAC1_VU },
|
|
{ WM8994_AIF1_DAC1_RIGHT_VOLUME, WM8994_AIF1DAC1_VU },
|
|
{ WM8994_AIF1_DAC2_LEFT_VOLUME, WM8994_AIF1DAC2_VU },
|
|
{ WM8994_AIF1_DAC2_RIGHT_VOLUME, WM8994_AIF1DAC2_VU },
|
|
{ WM8994_AIF2_DAC_LEFT_VOLUME, WM8994_AIF2DAC_VU },
|
|
{ WM8994_AIF2_DAC_RIGHT_VOLUME, WM8994_AIF2DAC_VU },
|
|
{ WM8994_AIF1_ADC1_LEFT_VOLUME, WM8994_AIF1ADC1_VU },
|
|
{ WM8994_AIF1_ADC1_RIGHT_VOLUME, WM8994_AIF1ADC1_VU },
|
|
{ WM8994_AIF1_ADC2_LEFT_VOLUME, WM8994_AIF1ADC2_VU },
|
|
{ WM8994_AIF1_ADC2_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
|
|
{ WM8994_AIF2_ADC_LEFT_VOLUME, WM8994_AIF2ADC_VU },
|
|
{ WM8994_AIF2_ADC_RIGHT_VOLUME, WM8994_AIF1ADC2_VU },
|
|
{ WM8994_DAC1_LEFT_VOLUME, WM8994_DAC1_VU },
|
|
{ WM8994_DAC1_RIGHT_VOLUME, WM8994_DAC1_VU },
|
|
{ WM8994_DAC2_LEFT_VOLUME, WM8994_DAC2_VU },
|
|
{ WM8994_DAC2_RIGHT_VOLUME, WM8994_DAC2_VU },
|
|
};
|
|
|
|
static int wm8994_drc_base[] = {
|
|
WM8994_AIF1_DRC1_1,
|
|
WM8994_AIF1_DRC2_1,
|
|
WM8994_AIF2_DRC_1,
|
|
};
|
|
|
|
static int wm8994_retune_mobile_base[] = {
|
|
WM8994_AIF1_DAC1_EQ_GAINS_1,
|
|
WM8994_AIF1_DAC2_EQ_GAINS_1,
|
|
WM8994_AIF2_EQ_GAINS_1,
|
|
};
|
|
|
|
static const struct wm8958_micd_rate micdet_rates[] = {
|
|
{ 32768, true, 1, 4 },
|
|
{ 32768, false, 1, 1 },
|
|
{ 44100 * 256, true, 7, 10 },
|
|
{ 44100 * 256, false, 7, 10 },
|
|
};
|
|
|
|
static const struct wm8958_micd_rate jackdet_rates[] = {
|
|
{ 32768, true, 0, 1 },
|
|
{ 32768, false, 0, 1 },
|
|
{ 44100 * 256, true, 10, 10 },
|
|
{ 44100 * 256, false, 7, 8 },
|
|
};
|
|
|
|
static void wm8958_micd_set_rate(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int best, i, sysclk, val;
|
|
bool idle;
|
|
const struct wm8958_micd_rate *rates;
|
|
int num_rates;
|
|
|
|
idle = !wm8994->jack_mic;
|
|
|
|
sysclk = snd_soc_component_read32(component, WM8994_CLOCKING_1);
|
|
if (sysclk & WM8994_SYSCLK_SRC)
|
|
sysclk = wm8994->aifclk[1];
|
|
else
|
|
sysclk = wm8994->aifclk[0];
|
|
|
|
if (control->pdata.micd_rates) {
|
|
rates = control->pdata.micd_rates;
|
|
num_rates = control->pdata.num_micd_rates;
|
|
} else if (wm8994->jackdet) {
|
|
rates = jackdet_rates;
|
|
num_rates = ARRAY_SIZE(jackdet_rates);
|
|
} else {
|
|
rates = micdet_rates;
|
|
num_rates = ARRAY_SIZE(micdet_rates);
|
|
}
|
|
|
|
best = 0;
|
|
for (i = 0; i < num_rates; i++) {
|
|
if (rates[i].idle != idle)
|
|
continue;
|
|
if (abs(rates[i].sysclk - sysclk) <
|
|
abs(rates[best].sysclk - sysclk))
|
|
best = i;
|
|
else if (rates[best].idle != idle)
|
|
best = i;
|
|
}
|
|
|
|
val = rates[best].start << WM8958_MICD_BIAS_STARTTIME_SHIFT
|
|
| rates[best].rate << WM8958_MICD_RATE_SHIFT;
|
|
|
|
dev_dbg(component->dev, "MICD rate %d,%d for %dHz %s\n",
|
|
rates[best].start, rates[best].rate, sysclk,
|
|
idle ? "idle" : "active");
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_1,
|
|
WM8958_MICD_BIAS_STARTTIME_MASK |
|
|
WM8958_MICD_RATE_MASK, val);
|
|
}
|
|
|
|
static int configure_aif_clock(struct snd_soc_component *component, int aif)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int rate;
|
|
int reg1 = 0;
|
|
int offset;
|
|
|
|
if (aif)
|
|
offset = 4;
|
|
else
|
|
offset = 0;
|
|
|
|
switch (wm8994->sysclk[aif]) {
|
|
case WM8994_SYSCLK_MCLK1:
|
|
rate = wm8994->mclk[0];
|
|
break;
|
|
|
|
case WM8994_SYSCLK_MCLK2:
|
|
reg1 |= 0x8;
|
|
rate = wm8994->mclk[1];
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL1:
|
|
reg1 |= 0x10;
|
|
rate = wm8994->fll[0].out;
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL2:
|
|
reg1 |= 0x18;
|
|
rate = wm8994->fll[1].out;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (rate >= 13500000) {
|
|
rate /= 2;
|
|
reg1 |= WM8994_AIF1CLK_DIV;
|
|
|
|
dev_dbg(component->dev, "Dividing AIF%d clock to %dHz\n",
|
|
aif + 1, rate);
|
|
}
|
|
|
|
wm8994->aifclk[aif] = rate;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_CLOCKING_1 + offset,
|
|
WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
|
|
reg1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int configure_clock(struct snd_soc_component *component)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int change, new;
|
|
|
|
/* Bring up the AIF clocks first */
|
|
configure_aif_clock(component, 0);
|
|
configure_aif_clock(component, 1);
|
|
|
|
/* Then switch CLK_SYS over to the higher of them; a change
|
|
* can only happen as a result of a clocking change which can
|
|
* only be made outside of DAPM so we can safely redo the
|
|
* clocking.
|
|
*/
|
|
|
|
/* If they're equal it doesn't matter which is used */
|
|
if (wm8994->aifclk[0] == wm8994->aifclk[1]) {
|
|
wm8958_micd_set_rate(component);
|
|
return 0;
|
|
}
|
|
|
|
if (wm8994->aifclk[0] < wm8994->aifclk[1])
|
|
new = WM8994_SYSCLK_SRC;
|
|
else
|
|
new = 0;
|
|
|
|
change = snd_soc_component_update_bits(component, WM8994_CLOCKING_1,
|
|
WM8994_SYSCLK_SRC, new);
|
|
if (change)
|
|
snd_soc_dapm_sync(dapm);
|
|
|
|
wm8958_micd_set_rate(component);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int check_clk_sys(struct snd_soc_dapm_widget *source,
|
|
struct snd_soc_dapm_widget *sink)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm);
|
|
int reg = snd_soc_component_read32(component, WM8994_CLOCKING_1);
|
|
const char *clk;
|
|
|
|
/* Check what we're currently using for CLK_SYS */
|
|
if (reg & WM8994_SYSCLK_SRC)
|
|
clk = "AIF2CLK";
|
|
else
|
|
clk = "AIF1CLK";
|
|
|
|
return strcmp(source->name, clk) == 0;
|
|
}
|
|
|
|
static const char *sidetone_hpf_text[] = {
|
|
"2.7kHz", "1.35kHz", "675Hz", "370Hz", "180Hz", "90Hz", "45Hz"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(sidetone_hpf,
|
|
WM8994_SIDETONE, 7, sidetone_hpf_text);
|
|
|
|
static const char *adc_hpf_text[] = {
|
|
"HiFi", "Voice 1", "Voice 2", "Voice 3"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1adc1_hpf,
|
|
WM8994_AIF1_ADC1_FILTERS, 13, adc_hpf_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1adc2_hpf,
|
|
WM8994_AIF1_ADC2_FILTERS, 13, adc_hpf_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2adc_hpf,
|
|
WM8994_AIF2_ADC_FILTERS, 13, adc_hpf_text);
|
|
|
|
static const DECLARE_TLV_DB_SCALE(aif_tlv, 0, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
|
|
static const DECLARE_TLV_DB_SCALE(st_tlv, -3600, 300, 0);
|
|
static const DECLARE_TLV_DB_SCALE(wm8994_3d_tlv, -1600, 183, 0);
|
|
static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
|
|
static const DECLARE_TLV_DB_SCALE(ng_tlv, -10200, 600, 0);
|
|
static const DECLARE_TLV_DB_SCALE(mixin_boost_tlv, 0, 900, 0);
|
|
|
|
#define WM8994_DRC_SWITCH(xname, reg, shift) \
|
|
SOC_SINGLE_EXT(xname, reg, shift, 1, 0, \
|
|
snd_soc_get_volsw, wm8994_put_drc_sw)
|
|
|
|
static int wm8994_put_drc_sw(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct soc_mixer_control *mc =
|
|
(struct soc_mixer_control *)kcontrol->private_value;
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
int mask, ret;
|
|
|
|
/* Can't enable both ADC and DAC paths simultaneously */
|
|
if (mc->shift == WM8994_AIF1DAC1_DRC_ENA_SHIFT)
|
|
mask = WM8994_AIF1ADC1L_DRC_ENA_MASK |
|
|
WM8994_AIF1ADC1R_DRC_ENA_MASK;
|
|
else
|
|
mask = WM8994_AIF1DAC1_DRC_ENA_MASK;
|
|
|
|
ret = snd_soc_component_read32(component, mc->reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret & mask)
|
|
return -EINVAL;
|
|
|
|
return snd_soc_put_volsw(kcontrol, ucontrol);
|
|
}
|
|
|
|
static void wm8994_set_drc(struct snd_soc_component *component, int drc)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
int base = wm8994_drc_base[drc];
|
|
int cfg = wm8994->drc_cfg[drc];
|
|
int save, i;
|
|
|
|
/* Save any enables; the configuration should clear them. */
|
|
save = snd_soc_component_read32(component, base);
|
|
save &= WM8994_AIF1DAC1_DRC_ENA | WM8994_AIF1ADC1L_DRC_ENA |
|
|
WM8994_AIF1ADC1R_DRC_ENA;
|
|
|
|
for (i = 0; i < WM8994_DRC_REGS; i++)
|
|
snd_soc_component_update_bits(component, base + i, 0xffff,
|
|
pdata->drc_cfgs[cfg].regs[i]);
|
|
|
|
snd_soc_component_update_bits(component, base, WM8994_AIF1DAC1_DRC_ENA |
|
|
WM8994_AIF1ADC1L_DRC_ENA |
|
|
WM8994_AIF1ADC1R_DRC_ENA, save);
|
|
}
|
|
|
|
/* Icky as hell but saves code duplication */
|
|
static int wm8994_get_drc(const char *name)
|
|
{
|
|
if (strcmp(name, "AIF1DRC1 Mode") == 0)
|
|
return 0;
|
|
if (strcmp(name, "AIF1DRC2 Mode") == 0)
|
|
return 1;
|
|
if (strcmp(name, "AIF2DRC Mode") == 0)
|
|
return 2;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wm8994_put_drc_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
int drc = wm8994_get_drc(kcontrol->id.name);
|
|
int value = ucontrol->value.enumerated.item[0];
|
|
|
|
if (drc < 0)
|
|
return drc;
|
|
|
|
if (value >= pdata->num_drc_cfgs)
|
|
return -EINVAL;
|
|
|
|
wm8994->drc_cfg[drc] = value;
|
|
|
|
wm8994_set_drc(component, drc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_get_drc_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int drc = wm8994_get_drc(kcontrol->id.name);
|
|
|
|
if (drc < 0)
|
|
return drc;
|
|
ucontrol->value.enumerated.item[0] = wm8994->drc_cfg[drc];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wm8994_set_retune_mobile(struct snd_soc_component *component, int block)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
int base = wm8994_retune_mobile_base[block];
|
|
int iface, best, best_val, save, i, cfg;
|
|
|
|
if (!pdata || !wm8994->num_retune_mobile_texts)
|
|
return;
|
|
|
|
switch (block) {
|
|
case 0:
|
|
case 1:
|
|
iface = 0;
|
|
break;
|
|
case 2:
|
|
iface = 1;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
/* Find the version of the currently selected configuration
|
|
* with the nearest sample rate. */
|
|
cfg = wm8994->retune_mobile_cfg[block];
|
|
best = 0;
|
|
best_val = INT_MAX;
|
|
for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
|
|
if (strcmp(pdata->retune_mobile_cfgs[i].name,
|
|
wm8994->retune_mobile_texts[cfg]) == 0 &&
|
|
abs(pdata->retune_mobile_cfgs[i].rate
|
|
- wm8994->dac_rates[iface]) < best_val) {
|
|
best = i;
|
|
best_val = abs(pdata->retune_mobile_cfgs[i].rate
|
|
- wm8994->dac_rates[iface]);
|
|
}
|
|
}
|
|
|
|
dev_dbg(component->dev, "ReTune Mobile %d %s/%dHz for %dHz sample rate\n",
|
|
block,
|
|
pdata->retune_mobile_cfgs[best].name,
|
|
pdata->retune_mobile_cfgs[best].rate,
|
|
wm8994->dac_rates[iface]);
|
|
|
|
/* The EQ will be disabled while reconfiguring it, remember the
|
|
* current configuration.
|
|
*/
|
|
save = snd_soc_component_read32(component, base);
|
|
save &= WM8994_AIF1DAC1_EQ_ENA;
|
|
|
|
for (i = 0; i < WM8994_EQ_REGS; i++)
|
|
snd_soc_component_update_bits(component, base + i, 0xffff,
|
|
pdata->retune_mobile_cfgs[best].regs[i]);
|
|
|
|
snd_soc_component_update_bits(component, base, WM8994_AIF1DAC1_EQ_ENA, save);
|
|
}
|
|
|
|
/* Icky as hell but saves code duplication */
|
|
static int wm8994_get_retune_mobile_block(const char *name)
|
|
{
|
|
if (strcmp(name, "AIF1.1 EQ Mode") == 0)
|
|
return 0;
|
|
if (strcmp(name, "AIF1.2 EQ Mode") == 0)
|
|
return 1;
|
|
if (strcmp(name, "AIF2 EQ Mode") == 0)
|
|
return 2;
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int wm8994_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
int block = wm8994_get_retune_mobile_block(kcontrol->id.name);
|
|
int value = ucontrol->value.enumerated.item[0];
|
|
|
|
if (block < 0)
|
|
return block;
|
|
|
|
if (value >= pdata->num_retune_mobile_cfgs)
|
|
return -EINVAL;
|
|
|
|
wm8994->retune_mobile_cfg[block] = value;
|
|
|
|
wm8994_set_retune_mobile(component, block);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int block = wm8994_get_retune_mobile_block(kcontrol->id.name);
|
|
|
|
if (block < 0)
|
|
return block;
|
|
|
|
ucontrol->value.enumerated.item[0] = wm8994->retune_mobile_cfg[block];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *aif_chan_src_text[] = {
|
|
"Left", "Right"
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1adcl_src,
|
|
WM8994_AIF1_CONTROL_1, 15, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1adcr_src,
|
|
WM8994_AIF1_CONTROL_1, 14, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2adcl_src,
|
|
WM8994_AIF2_CONTROL_1, 15, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2adcr_src,
|
|
WM8994_AIF2_CONTROL_1, 14, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1dacl_src,
|
|
WM8994_AIF1_CONTROL_2, 15, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1dacr_src,
|
|
WM8994_AIF1_CONTROL_2, 14, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2dacl_src,
|
|
WM8994_AIF2_CONTROL_2, 15, aif_chan_src_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2dacr_src,
|
|
WM8994_AIF2_CONTROL_2, 14, aif_chan_src_text);
|
|
|
|
static const char *osr_text[] = {
|
|
"Low Power", "High Performance",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(dac_osr,
|
|
WM8994_OVERSAMPLING, 0, osr_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(adc_osr,
|
|
WM8994_OVERSAMPLING, 1, osr_text);
|
|
|
|
static const struct snd_kcontrol_new wm8994_snd_controls[] = {
|
|
SOC_DOUBLE_R_TLV("AIF1ADC1 Volume", WM8994_AIF1_ADC1_LEFT_VOLUME,
|
|
WM8994_AIF1_ADC1_RIGHT_VOLUME,
|
|
1, 119, 0, digital_tlv),
|
|
SOC_DOUBLE_R_TLV("AIF1ADC2 Volume", WM8994_AIF1_ADC2_LEFT_VOLUME,
|
|
WM8994_AIF1_ADC2_RIGHT_VOLUME,
|
|
1, 119, 0, digital_tlv),
|
|
SOC_DOUBLE_R_TLV("AIF2ADC Volume", WM8994_AIF2_ADC_LEFT_VOLUME,
|
|
WM8994_AIF2_ADC_RIGHT_VOLUME,
|
|
1, 119, 0, digital_tlv),
|
|
|
|
SOC_ENUM("AIF1ADCL Source", aif1adcl_src),
|
|
SOC_ENUM("AIF1ADCR Source", aif1adcr_src),
|
|
SOC_ENUM("AIF2ADCL Source", aif2adcl_src),
|
|
SOC_ENUM("AIF2ADCR Source", aif2adcr_src),
|
|
|
|
SOC_ENUM("AIF1DACL Source", aif1dacl_src),
|
|
SOC_ENUM("AIF1DACR Source", aif1dacr_src),
|
|
SOC_ENUM("AIF2DACL Source", aif2dacl_src),
|
|
SOC_ENUM("AIF2DACR Source", aif2dacr_src),
|
|
|
|
SOC_DOUBLE_R_TLV("AIF1DAC1 Volume", WM8994_AIF1_DAC1_LEFT_VOLUME,
|
|
WM8994_AIF1_DAC1_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
|
|
SOC_DOUBLE_R_TLV("AIF1DAC2 Volume", WM8994_AIF1_DAC2_LEFT_VOLUME,
|
|
WM8994_AIF1_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
|
|
SOC_DOUBLE_R_TLV("AIF2DAC Volume", WM8994_AIF2_DAC_LEFT_VOLUME,
|
|
WM8994_AIF2_DAC_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
|
|
|
|
SOC_SINGLE_TLV("AIF1 Boost Volume", WM8994_AIF1_CONTROL_2, 10, 3, 0, aif_tlv),
|
|
SOC_SINGLE_TLV("AIF2 Boost Volume", WM8994_AIF2_CONTROL_2, 10, 3, 0, aif_tlv),
|
|
|
|
SOC_SINGLE("AIF1DAC1 EQ Switch", WM8994_AIF1_DAC1_EQ_GAINS_1, 0, 1, 0),
|
|
SOC_SINGLE("AIF1DAC2 EQ Switch", WM8994_AIF1_DAC2_EQ_GAINS_1, 0, 1, 0),
|
|
SOC_SINGLE("AIF2 EQ Switch", WM8994_AIF2_EQ_GAINS_1, 0, 1, 0),
|
|
|
|
WM8994_DRC_SWITCH("AIF1DAC1 DRC Switch", WM8994_AIF1_DRC1_1, 2),
|
|
WM8994_DRC_SWITCH("AIF1ADC1L DRC Switch", WM8994_AIF1_DRC1_1, 1),
|
|
WM8994_DRC_SWITCH("AIF1ADC1R DRC Switch", WM8994_AIF1_DRC1_1, 0),
|
|
|
|
WM8994_DRC_SWITCH("AIF1DAC2 DRC Switch", WM8994_AIF1_DRC2_1, 2),
|
|
WM8994_DRC_SWITCH("AIF1ADC2L DRC Switch", WM8994_AIF1_DRC2_1, 1),
|
|
WM8994_DRC_SWITCH("AIF1ADC2R DRC Switch", WM8994_AIF1_DRC2_1, 0),
|
|
|
|
WM8994_DRC_SWITCH("AIF2DAC DRC Switch", WM8994_AIF2_DRC_1, 2),
|
|
WM8994_DRC_SWITCH("AIF2ADCL DRC Switch", WM8994_AIF2_DRC_1, 1),
|
|
WM8994_DRC_SWITCH("AIF2ADCR DRC Switch", WM8994_AIF2_DRC_1, 0),
|
|
|
|
SOC_SINGLE_TLV("DAC1 Right Sidetone Volume", WM8994_DAC1_MIXER_VOLUMES,
|
|
5, 12, 0, st_tlv),
|
|
SOC_SINGLE_TLV("DAC1 Left Sidetone Volume", WM8994_DAC1_MIXER_VOLUMES,
|
|
0, 12, 0, st_tlv),
|
|
SOC_SINGLE_TLV("DAC2 Right Sidetone Volume", WM8994_DAC2_MIXER_VOLUMES,
|
|
5, 12, 0, st_tlv),
|
|
SOC_SINGLE_TLV("DAC2 Left Sidetone Volume", WM8994_DAC2_MIXER_VOLUMES,
|
|
0, 12, 0, st_tlv),
|
|
SOC_ENUM("Sidetone HPF Mux", sidetone_hpf),
|
|
SOC_SINGLE("Sidetone HPF Switch", WM8994_SIDETONE, 6, 1, 0),
|
|
|
|
SOC_ENUM("AIF1ADC1 HPF Mode", aif1adc1_hpf),
|
|
SOC_DOUBLE("AIF1ADC1 HPF Switch", WM8994_AIF1_ADC1_FILTERS, 12, 11, 1, 0),
|
|
|
|
SOC_ENUM("AIF1ADC2 HPF Mode", aif1adc2_hpf),
|
|
SOC_DOUBLE("AIF1ADC2 HPF Switch", WM8994_AIF1_ADC2_FILTERS, 12, 11, 1, 0),
|
|
|
|
SOC_ENUM("AIF2ADC HPF Mode", aif2adc_hpf),
|
|
SOC_DOUBLE("AIF2ADC HPF Switch", WM8994_AIF2_ADC_FILTERS, 12, 11, 1, 0),
|
|
|
|
SOC_ENUM("ADC OSR", adc_osr),
|
|
SOC_ENUM("DAC OSR", dac_osr),
|
|
|
|
SOC_DOUBLE_R_TLV("DAC1 Volume", WM8994_DAC1_LEFT_VOLUME,
|
|
WM8994_DAC1_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
|
|
SOC_DOUBLE_R("DAC1 Switch", WM8994_DAC1_LEFT_VOLUME,
|
|
WM8994_DAC1_RIGHT_VOLUME, 9, 1, 1),
|
|
|
|
SOC_DOUBLE_R_TLV("DAC2 Volume", WM8994_DAC2_LEFT_VOLUME,
|
|
WM8994_DAC2_RIGHT_VOLUME, 1, 96, 0, digital_tlv),
|
|
SOC_DOUBLE_R("DAC2 Switch", WM8994_DAC2_LEFT_VOLUME,
|
|
WM8994_DAC2_RIGHT_VOLUME, 9, 1, 1),
|
|
|
|
SOC_SINGLE_TLV("SPKL DAC2 Volume", WM8994_SPKMIXL_ATTENUATION,
|
|
6, 1, 1, wm_hubs_spkmix_tlv),
|
|
SOC_SINGLE_TLV("SPKL DAC1 Volume", WM8994_SPKMIXL_ATTENUATION,
|
|
2, 1, 1, wm_hubs_spkmix_tlv),
|
|
|
|
SOC_SINGLE_TLV("SPKR DAC2 Volume", WM8994_SPKMIXR_ATTENUATION,
|
|
6, 1, 1, wm_hubs_spkmix_tlv),
|
|
SOC_SINGLE_TLV("SPKR DAC1 Volume", WM8994_SPKMIXR_ATTENUATION,
|
|
2, 1, 1, wm_hubs_spkmix_tlv),
|
|
|
|
SOC_SINGLE_TLV("AIF1DAC1 3D Stereo Volume", WM8994_AIF1_DAC1_FILTERS_2,
|
|
10, 15, 0, wm8994_3d_tlv),
|
|
SOC_SINGLE("AIF1DAC1 3D Stereo Switch", WM8994_AIF1_DAC1_FILTERS_2,
|
|
8, 1, 0),
|
|
SOC_SINGLE_TLV("AIF1DAC2 3D Stereo Volume", WM8994_AIF1_DAC2_FILTERS_2,
|
|
10, 15, 0, wm8994_3d_tlv),
|
|
SOC_SINGLE("AIF1DAC2 3D Stereo Switch", WM8994_AIF1_DAC2_FILTERS_2,
|
|
8, 1, 0),
|
|
SOC_SINGLE_TLV("AIF2DAC 3D Stereo Volume", WM8994_AIF2_DAC_FILTERS_2,
|
|
10, 15, 0, wm8994_3d_tlv),
|
|
SOC_SINGLE("AIF2DAC 3D Stereo Switch", WM8994_AIF2_DAC_FILTERS_2,
|
|
8, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8994_eq_controls[] = {
|
|
SOC_SINGLE_TLV("AIF1DAC1 EQ1 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 11, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC1 EQ2 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 6, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC1 EQ3 Volume", WM8994_AIF1_DAC1_EQ_GAINS_1, 1, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC1 EQ4 Volume", WM8994_AIF1_DAC1_EQ_GAINS_2, 11, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC1 EQ5 Volume", WM8994_AIF1_DAC1_EQ_GAINS_2, 6, 31, 0,
|
|
eq_tlv),
|
|
|
|
SOC_SINGLE_TLV("AIF1DAC2 EQ1 Volume", WM8994_AIF1_DAC2_EQ_GAINS_1, 11, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC2 EQ2 Volume", WM8994_AIF1_DAC2_EQ_GAINS_1, 6, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC2 EQ3 Volume", WM8994_AIF1_DAC2_EQ_GAINS_1, 1, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC2 EQ4 Volume", WM8994_AIF1_DAC2_EQ_GAINS_2, 11, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF1DAC2 EQ5 Volume", WM8994_AIF1_DAC2_EQ_GAINS_2, 6, 31, 0,
|
|
eq_tlv),
|
|
|
|
SOC_SINGLE_TLV("AIF2 EQ1 Volume", WM8994_AIF2_EQ_GAINS_1, 11, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF2 EQ2 Volume", WM8994_AIF2_EQ_GAINS_1, 6, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF2 EQ3 Volume", WM8994_AIF2_EQ_GAINS_1, 1, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF2 EQ4 Volume", WM8994_AIF2_EQ_GAINS_2, 11, 31, 0,
|
|
eq_tlv),
|
|
SOC_SINGLE_TLV("AIF2 EQ5 Volume", WM8994_AIF2_EQ_GAINS_2, 6, 31, 0,
|
|
eq_tlv),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm8994_drc_controls[] = {
|
|
SND_SOC_BYTES_MASK("AIF1.1 DRC", WM8994_AIF1_DRC1_1, 5,
|
|
WM8994_AIF1DAC1_DRC_ENA | WM8994_AIF1ADC1L_DRC_ENA |
|
|
WM8994_AIF1ADC1R_DRC_ENA),
|
|
SND_SOC_BYTES_MASK("AIF1.2 DRC", WM8994_AIF1_DRC2_1, 5,
|
|
WM8994_AIF1DAC2_DRC_ENA | WM8994_AIF1ADC2L_DRC_ENA |
|
|
WM8994_AIF1ADC2R_DRC_ENA),
|
|
SND_SOC_BYTES_MASK("AIF2 DRC", WM8994_AIF2_DRC_1, 5,
|
|
WM8994_AIF2DAC_DRC_ENA | WM8994_AIF2ADCL_DRC_ENA |
|
|
WM8994_AIF2ADCR_DRC_ENA),
|
|
};
|
|
|
|
static const char *wm8958_ng_text[] = {
|
|
"30ms", "125ms", "250ms", "500ms",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(wm8958_aif1dac1_ng_hold,
|
|
WM8958_AIF1_DAC1_NOISE_GATE,
|
|
WM8958_AIF1DAC1_NG_THR_SHIFT,
|
|
wm8958_ng_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(wm8958_aif1dac2_ng_hold,
|
|
WM8958_AIF1_DAC2_NOISE_GATE,
|
|
WM8958_AIF1DAC2_NG_THR_SHIFT,
|
|
wm8958_ng_text);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(wm8958_aif2dac_ng_hold,
|
|
WM8958_AIF2_DAC_NOISE_GATE,
|
|
WM8958_AIF2DAC_NG_THR_SHIFT,
|
|
wm8958_ng_text);
|
|
|
|
static const struct snd_kcontrol_new wm8958_snd_controls[] = {
|
|
SOC_SINGLE_TLV("AIF3 Boost Volume", WM8958_AIF3_CONTROL_2, 10, 3, 0, aif_tlv),
|
|
|
|
SOC_SINGLE("AIF1DAC1 Noise Gate Switch", WM8958_AIF1_DAC1_NOISE_GATE,
|
|
WM8958_AIF1DAC1_NG_ENA_SHIFT, 1, 0),
|
|
SOC_ENUM("AIF1DAC1 Noise Gate Hold Time", wm8958_aif1dac1_ng_hold),
|
|
SOC_SINGLE_TLV("AIF1DAC1 Noise Gate Threshold Volume",
|
|
WM8958_AIF1_DAC1_NOISE_GATE, WM8958_AIF1DAC1_NG_THR_SHIFT,
|
|
7, 1, ng_tlv),
|
|
|
|
SOC_SINGLE("AIF1DAC2 Noise Gate Switch", WM8958_AIF1_DAC2_NOISE_GATE,
|
|
WM8958_AIF1DAC2_NG_ENA_SHIFT, 1, 0),
|
|
SOC_ENUM("AIF1DAC2 Noise Gate Hold Time", wm8958_aif1dac2_ng_hold),
|
|
SOC_SINGLE_TLV("AIF1DAC2 Noise Gate Threshold Volume",
|
|
WM8958_AIF1_DAC2_NOISE_GATE, WM8958_AIF1DAC2_NG_THR_SHIFT,
|
|
7, 1, ng_tlv),
|
|
|
|
SOC_SINGLE("AIF2DAC Noise Gate Switch", WM8958_AIF2_DAC_NOISE_GATE,
|
|
WM8958_AIF2DAC_NG_ENA_SHIFT, 1, 0),
|
|
SOC_ENUM("AIF2DAC Noise Gate Hold Time", wm8958_aif2dac_ng_hold),
|
|
SOC_SINGLE_TLV("AIF2DAC Noise Gate Threshold Volume",
|
|
WM8958_AIF2_DAC_NOISE_GATE, WM8958_AIF2DAC_NG_THR_SHIFT,
|
|
7, 1, ng_tlv),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new wm1811_snd_controls[] = {
|
|
SOC_SINGLE_TLV("MIXINL IN1LP Boost Volume", WM8994_INPUT_MIXER_1, 7, 1, 0,
|
|
mixin_boost_tlv),
|
|
SOC_SINGLE_TLV("MIXINL IN1RP Boost Volume", WM8994_INPUT_MIXER_1, 8, 1, 0,
|
|
mixin_boost_tlv),
|
|
};
|
|
|
|
/* We run all mode setting through a function to enforce audio mode */
|
|
static void wm1811_jackdet_set_mode(struct snd_soc_component *component, u16 mode)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
if (!wm8994->jackdet || !wm8994->micdet[0].jack)
|
|
return;
|
|
|
|
if (wm8994->active_refcount)
|
|
mode = WM1811_JACKDET_MODE_AUDIO;
|
|
|
|
if (mode == wm8994->jackdet_mode)
|
|
return;
|
|
|
|
wm8994->jackdet_mode = mode;
|
|
|
|
/* Always use audio mode to detect while the system is active */
|
|
if (mode != WM1811_JACKDET_MODE_NONE)
|
|
mode = WM1811_JACKDET_MODE_AUDIO;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM1811_JACKDET_MODE_MASK, mode);
|
|
}
|
|
|
|
static void active_reference(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
mutex_lock(&wm8994->accdet_lock);
|
|
|
|
wm8994->active_refcount++;
|
|
|
|
dev_dbg(component->dev, "Active refcount incremented, now %d\n",
|
|
wm8994->active_refcount);
|
|
|
|
/* If we're using jack detection go into audio mode */
|
|
wm1811_jackdet_set_mode(component, WM1811_JACKDET_MODE_AUDIO);
|
|
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
}
|
|
|
|
static void active_dereference(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
u16 mode;
|
|
|
|
mutex_lock(&wm8994->accdet_lock);
|
|
|
|
wm8994->active_refcount--;
|
|
|
|
dev_dbg(component->dev, "Active refcount decremented, now %d\n",
|
|
wm8994->active_refcount);
|
|
|
|
if (wm8994->active_refcount == 0) {
|
|
/* Go into appropriate detection only mode */
|
|
if (wm8994->jack_mic || wm8994->mic_detecting)
|
|
mode = WM1811_JACKDET_MODE_MIC;
|
|
else
|
|
mode = WM1811_JACKDET_MODE_JACK;
|
|
|
|
wm1811_jackdet_set_mode(component, mode);
|
|
}
|
|
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
}
|
|
|
|
static int clk_sys_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
return configure_clock(component);
|
|
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
/*
|
|
* JACKDET won't run until we start the clock and it
|
|
* only reports deltas, make sure we notify the state
|
|
* up the stack on startup. Use a *very* generous
|
|
* timeout for paranoia, there's no urgency and we
|
|
* don't want false reports.
|
|
*/
|
|
if (wm8994->jackdet && !wm8994->clk_has_run) {
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&wm8994->jackdet_bootstrap,
|
|
msecs_to_jiffies(1000));
|
|
wm8994->clk_has_run = true;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
configure_clock(component);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vmid_reference(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
wm8994->vmid_refcount++;
|
|
|
|
dev_dbg(component->dev, "Referencing VMID, refcount is now %d\n",
|
|
wm8994->vmid_refcount);
|
|
|
|
if (wm8994->vmid_refcount == 1) {
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_1,
|
|
WM8994_LINEOUT1_DISCH |
|
|
WM8994_LINEOUT2_DISCH, 0);
|
|
|
|
wm_hubs_vmid_ena(component);
|
|
|
|
switch (wm8994->vmid_mode) {
|
|
default:
|
|
WARN_ON(NULL == "Invalid VMID mode");
|
|
/* fall through */
|
|
case WM8994_VMID_NORMAL:
|
|
/* Startup bias, VMID ramp & buffer */
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_VMID_DISCH |
|
|
WM8994_STARTUP_BIAS_ENA |
|
|
WM8994_VMID_BUF_ENA |
|
|
WM8994_VMID_RAMP_MASK,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_STARTUP_BIAS_ENA |
|
|
WM8994_VMID_BUF_ENA |
|
|
(0x2 << WM8994_VMID_RAMP_SHIFT));
|
|
|
|
/* Main bias enable, VMID=2x40k */
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_BIAS_ENA |
|
|
WM8994_VMID_SEL_MASK,
|
|
WM8994_BIAS_ENA | 0x2);
|
|
|
|
msleep(300);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM8994_VMID_RAMP_MASK |
|
|
WM8994_BIAS_SRC,
|
|
0);
|
|
break;
|
|
|
|
case WM8994_VMID_FORCE:
|
|
/* Startup bias, slow VMID ramp & buffer */
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_VMID_DISCH |
|
|
WM8994_STARTUP_BIAS_ENA |
|
|
WM8994_VMID_BUF_ENA |
|
|
WM8994_VMID_RAMP_MASK,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_STARTUP_BIAS_ENA |
|
|
WM8994_VMID_BUF_ENA |
|
|
(0x2 << WM8994_VMID_RAMP_SHIFT));
|
|
|
|
/* Main bias enable, VMID=2x40k */
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_BIAS_ENA |
|
|
WM8994_VMID_SEL_MASK,
|
|
WM8994_BIAS_ENA | 0x2);
|
|
|
|
msleep(400);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM8994_VMID_RAMP_MASK |
|
|
WM8994_BIAS_SRC,
|
|
0);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void vmid_dereference(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
wm8994->vmid_refcount--;
|
|
|
|
dev_dbg(component->dev, "Dereferencing VMID, refcount is now %d\n",
|
|
wm8994->vmid_refcount);
|
|
|
|
if (wm8994->vmid_refcount == 0) {
|
|
if (wm8994->hubs.lineout1_se)
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_3,
|
|
WM8994_LINEOUT1N_ENA |
|
|
WM8994_LINEOUT1P_ENA,
|
|
WM8994_LINEOUT1N_ENA |
|
|
WM8994_LINEOUT1P_ENA);
|
|
|
|
if (wm8994->hubs.lineout2_se)
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_3,
|
|
WM8994_LINEOUT2N_ENA |
|
|
WM8994_LINEOUT2P_ENA,
|
|
WM8994_LINEOUT2N_ENA |
|
|
WM8994_LINEOUT2P_ENA);
|
|
|
|
/* Start discharging VMID */
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_VMID_DISCH,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_VMID_DISCH);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_VMID_SEL_MASK, 0);
|
|
|
|
msleep(400);
|
|
|
|
/* Active discharge */
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_1,
|
|
WM8994_LINEOUT1_DISCH |
|
|
WM8994_LINEOUT2_DISCH,
|
|
WM8994_LINEOUT1_DISCH |
|
|
WM8994_LINEOUT2_DISCH);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_3,
|
|
WM8994_LINEOUT1N_ENA |
|
|
WM8994_LINEOUT1P_ENA |
|
|
WM8994_LINEOUT2N_ENA |
|
|
WM8994_LINEOUT2P_ENA, 0);
|
|
|
|
/* Switch off startup biases */
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_2,
|
|
WM8994_BIAS_SRC |
|
|
WM8994_STARTUP_BIAS_ENA |
|
|
WM8994_VMID_BUF_ENA |
|
|
WM8994_VMID_RAMP_MASK, 0);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_1,
|
|
WM8994_VMID_SEL_MASK, 0);
|
|
}
|
|
|
|
pm_runtime_put(component->dev);
|
|
}
|
|
|
|
static int vmid_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
vmid_reference(component);
|
|
break;
|
|
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
vmid_dereference(component);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool wm8994_check_class_w_digital(struct snd_soc_component *component)
|
|
{
|
|
int source = 0; /* GCC flow analysis can't track enable */
|
|
int reg, reg_r;
|
|
|
|
/* We also need the same AIF source for L/R and only one path */
|
|
reg = snd_soc_component_read32(component, WM8994_DAC1_LEFT_MIXER_ROUTING);
|
|
switch (reg) {
|
|
case WM8994_AIF2DACL_TO_DAC1L:
|
|
dev_vdbg(component->dev, "Class W source AIF2DAC\n");
|
|
source = 2 << WM8994_CP_DYN_SRC_SEL_SHIFT;
|
|
break;
|
|
case WM8994_AIF1DAC2L_TO_DAC1L:
|
|
dev_vdbg(component->dev, "Class W source AIF1DAC2\n");
|
|
source = 1 << WM8994_CP_DYN_SRC_SEL_SHIFT;
|
|
break;
|
|
case WM8994_AIF1DAC1L_TO_DAC1L:
|
|
dev_vdbg(component->dev, "Class W source AIF1DAC1\n");
|
|
source = 0 << WM8994_CP_DYN_SRC_SEL_SHIFT;
|
|
break;
|
|
default:
|
|
dev_vdbg(component->dev, "DAC mixer setting: %x\n", reg);
|
|
return false;
|
|
}
|
|
|
|
reg_r = snd_soc_component_read32(component, WM8994_DAC1_RIGHT_MIXER_ROUTING);
|
|
if (reg_r != reg) {
|
|
dev_vdbg(component->dev, "Left and right DAC mixers different\n");
|
|
return false;
|
|
}
|
|
|
|
/* Set the source up */
|
|
snd_soc_component_update_bits(component, WM8994_CLASS_W_1,
|
|
WM8994_CP_DYN_SRC_SEL_MASK, source);
|
|
|
|
return true;
|
|
}
|
|
|
|
static int aif1clk_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA;
|
|
int i;
|
|
int dac;
|
|
int adc;
|
|
int val;
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
case WM8958:
|
|
mask |= WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
/* Don't enable timeslot 2 if not in use */
|
|
if (wm8994->channels[0] <= 2)
|
|
mask &= ~(WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA);
|
|
|
|
val = snd_soc_component_read32(component, WM8994_AIF1_CONTROL_1);
|
|
if ((val & WM8994_AIF1ADCL_SRC) &&
|
|
(val & WM8994_AIF1ADCR_SRC))
|
|
adc = WM8994_AIF1ADC1R_ENA | WM8994_AIF1ADC2R_ENA;
|
|
else if (!(val & WM8994_AIF1ADCL_SRC) &&
|
|
!(val & WM8994_AIF1ADCR_SRC))
|
|
adc = WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC2L_ENA;
|
|
else
|
|
adc = WM8994_AIF1ADC1R_ENA | WM8994_AIF1ADC2R_ENA |
|
|
WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC2L_ENA;
|
|
|
|
val = snd_soc_component_read32(component, WM8994_AIF1_CONTROL_2);
|
|
if ((val & WM8994_AIF1DACL_SRC) &&
|
|
(val & WM8994_AIF1DACR_SRC))
|
|
dac = WM8994_AIF1DAC1R_ENA | WM8994_AIF1DAC2R_ENA;
|
|
else if (!(val & WM8994_AIF1DACL_SRC) &&
|
|
!(val & WM8994_AIF1DACR_SRC))
|
|
dac = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC2L_ENA;
|
|
else
|
|
dac = WM8994_AIF1DAC1R_ENA | WM8994_AIF1DAC2R_ENA |
|
|
WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC2L_ENA;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_4,
|
|
mask, adc);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5,
|
|
mask, dac);
|
|
snd_soc_component_update_bits(component, WM8994_CLOCKING_1,
|
|
WM8994_AIF1DSPCLK_ENA |
|
|
WM8994_SYSDSPCLK_ENA,
|
|
WM8994_AIF1DSPCLK_ENA |
|
|
WM8994_SYSDSPCLK_ENA);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_4, mask,
|
|
WM8994_AIF1ADC1R_ENA |
|
|
WM8994_AIF1ADC1L_ENA |
|
|
WM8994_AIF1ADC2R_ENA |
|
|
WM8994_AIF1ADC2L_ENA);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5, mask,
|
|
WM8994_AIF1DAC1R_ENA |
|
|
WM8994_AIF1DAC1L_ENA |
|
|
WM8994_AIF1DAC2R_ENA |
|
|
WM8994_AIF1DAC2L_ENA);
|
|
break;
|
|
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
|
|
snd_soc_component_write(component, wm8994_vu_bits[i].reg,
|
|
snd_soc_component_read32(component,
|
|
wm8994_vu_bits[i].reg));
|
|
break;
|
|
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5,
|
|
mask, 0);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_4,
|
|
mask, 0);
|
|
|
|
val = snd_soc_component_read32(component, WM8994_CLOCKING_1);
|
|
if (val & WM8994_AIF2DSPCLK_ENA)
|
|
val = WM8994_SYSDSPCLK_ENA;
|
|
else
|
|
val = 0;
|
|
snd_soc_component_update_bits(component, WM8994_CLOCKING_1,
|
|
WM8994_SYSDSPCLK_ENA |
|
|
WM8994_AIF1DSPCLK_ENA, val);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aif2clk_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
int i;
|
|
int dac;
|
|
int adc;
|
|
int val;
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
val = snd_soc_component_read32(component, WM8994_AIF2_CONTROL_1);
|
|
if ((val & WM8994_AIF2ADCL_SRC) &&
|
|
(val & WM8994_AIF2ADCR_SRC))
|
|
adc = WM8994_AIF2ADCR_ENA;
|
|
else if (!(val & WM8994_AIF2ADCL_SRC) &&
|
|
!(val & WM8994_AIF2ADCR_SRC))
|
|
adc = WM8994_AIF2ADCL_ENA;
|
|
else
|
|
adc = WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA;
|
|
|
|
|
|
val = snd_soc_component_read32(component, WM8994_AIF2_CONTROL_2);
|
|
if ((val & WM8994_AIF2DACL_SRC) &&
|
|
(val & WM8994_AIF2DACR_SRC))
|
|
dac = WM8994_AIF2DACR_ENA;
|
|
else if (!(val & WM8994_AIF2DACL_SRC) &&
|
|
!(val & WM8994_AIF2DACR_SRC))
|
|
dac = WM8994_AIF2DACL_ENA;
|
|
else
|
|
dac = WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_4,
|
|
WM8994_AIF2ADCL_ENA |
|
|
WM8994_AIF2ADCR_ENA, adc);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5,
|
|
WM8994_AIF2DACL_ENA |
|
|
WM8994_AIF2DACR_ENA, dac);
|
|
snd_soc_component_update_bits(component, WM8994_CLOCKING_1,
|
|
WM8994_AIF2DSPCLK_ENA |
|
|
WM8994_SYSDSPCLK_ENA,
|
|
WM8994_AIF2DSPCLK_ENA |
|
|
WM8994_SYSDSPCLK_ENA);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_4,
|
|
WM8994_AIF2ADCL_ENA |
|
|
WM8994_AIF2ADCR_ENA,
|
|
WM8994_AIF2ADCL_ENA |
|
|
WM8994_AIF2ADCR_ENA);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5,
|
|
WM8994_AIF2DACL_ENA |
|
|
WM8994_AIF2DACR_ENA,
|
|
WM8994_AIF2DACL_ENA |
|
|
WM8994_AIF2DACR_ENA);
|
|
break;
|
|
|
|
case SND_SOC_DAPM_POST_PMU:
|
|
for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
|
|
snd_soc_component_write(component, wm8994_vu_bits[i].reg,
|
|
snd_soc_component_read32(component,
|
|
wm8994_vu_bits[i].reg));
|
|
break;
|
|
|
|
case SND_SOC_DAPM_PRE_PMD:
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5,
|
|
WM8994_AIF2DACL_ENA |
|
|
WM8994_AIF2DACR_ENA, 0);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_4,
|
|
WM8994_AIF2ADCL_ENA |
|
|
WM8994_AIF2ADCR_ENA, 0);
|
|
|
|
val = snd_soc_component_read32(component, WM8994_CLOCKING_1);
|
|
if (val & WM8994_AIF1DSPCLK_ENA)
|
|
val = WM8994_SYSDSPCLK_ENA;
|
|
else
|
|
val = 0;
|
|
snd_soc_component_update_bits(component, WM8994_CLOCKING_1,
|
|
WM8994_SYSDSPCLK_ENA |
|
|
WM8994_AIF2DSPCLK_ENA, val);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aif1clk_late_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
wm8994->aif1clk_enable = 1;
|
|
break;
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
wm8994->aif1clk_disable = 1;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int aif2clk_late_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
wm8994->aif2clk_enable = 1;
|
|
break;
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
wm8994->aif2clk_disable = 1;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int late_enable_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
if (wm8994->aif1clk_enable) {
|
|
aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_CLOCKING_1,
|
|
WM8994_AIF1CLK_ENA_MASK,
|
|
WM8994_AIF1CLK_ENA);
|
|
aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
|
|
wm8994->aif1clk_enable = 0;
|
|
}
|
|
if (wm8994->aif2clk_enable) {
|
|
aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMU);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_CLOCKING_1,
|
|
WM8994_AIF2CLK_ENA_MASK,
|
|
WM8994_AIF2CLK_ENA);
|
|
aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMU);
|
|
wm8994->aif2clk_enable = 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* We may also have postponed startup of DSP, handle that. */
|
|
wm8958_aif_ev(w, kcontrol, event);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int late_disable_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
if (wm8994->aif1clk_disable) {
|
|
aif1clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_CLOCKING_1,
|
|
WM8994_AIF1CLK_ENA_MASK, 0);
|
|
aif1clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
|
|
wm8994->aif1clk_disable = 0;
|
|
}
|
|
if (wm8994->aif2clk_disable) {
|
|
aif2clk_ev(w, kcontrol, SND_SOC_DAPM_PRE_PMD);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_CLOCKING_1,
|
|
WM8994_AIF2CLK_ENA_MASK, 0);
|
|
aif2clk_ev(w, kcontrol, SND_SOC_DAPM_POST_PMD);
|
|
wm8994->aif2clk_disable = 0;
|
|
}
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adc_mux_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
late_enable_ev(w, kcontrol, event);
|
|
return 0;
|
|
}
|
|
|
|
static int micbias_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
late_enable_ev(w, kcontrol, event);
|
|
return 0;
|
|
}
|
|
|
|
static int dac_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
unsigned int mask = 1 << w->shift;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_5,
|
|
mask, mask);
|
|
return 0;
|
|
}
|
|
|
|
static const char *adc_mux_text[] = {
|
|
"ADC",
|
|
"DMIC",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_VIRT_DECL(adc_enum, adc_mux_text);
|
|
|
|
static const struct snd_kcontrol_new adcl_mux =
|
|
SOC_DAPM_ENUM("ADCL Mux", adc_enum);
|
|
|
|
static const struct snd_kcontrol_new adcr_mux =
|
|
SOC_DAPM_ENUM("ADCR Mux", adc_enum);
|
|
|
|
static const struct snd_kcontrol_new left_speaker_mixer[] = {
|
|
SOC_DAPM_SINGLE("DAC2 Switch", WM8994_SPEAKER_MIXER, 9, 1, 0),
|
|
SOC_DAPM_SINGLE("Input Switch", WM8994_SPEAKER_MIXER, 7, 1, 0),
|
|
SOC_DAPM_SINGLE("IN1LP Switch", WM8994_SPEAKER_MIXER, 5, 1, 0),
|
|
SOC_DAPM_SINGLE("Output Switch", WM8994_SPEAKER_MIXER, 3, 1, 0),
|
|
SOC_DAPM_SINGLE("DAC1 Switch", WM8994_SPEAKER_MIXER, 1, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new right_speaker_mixer[] = {
|
|
SOC_DAPM_SINGLE("DAC2 Switch", WM8994_SPEAKER_MIXER, 8, 1, 0),
|
|
SOC_DAPM_SINGLE("Input Switch", WM8994_SPEAKER_MIXER, 6, 1, 0),
|
|
SOC_DAPM_SINGLE("IN1RP Switch", WM8994_SPEAKER_MIXER, 4, 1, 0),
|
|
SOC_DAPM_SINGLE("Output Switch", WM8994_SPEAKER_MIXER, 2, 1, 0),
|
|
SOC_DAPM_SINGLE("DAC1 Switch", WM8994_SPEAKER_MIXER, 0, 1, 0),
|
|
};
|
|
|
|
/* Debugging; dump chip status after DAPM transitions */
|
|
static int post_ev(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kcontrol, int event)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
|
|
dev_dbg(component->dev, "SRC status: %x\n",
|
|
snd_soc_component_read32(component,
|
|
WM8994_RATE_STATUS));
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new aif1adc1l_mix[] = {
|
|
SOC_DAPM_SINGLE("ADC/DMIC Switch", WM8994_AIF1_ADC1_LEFT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC1_LEFT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new aif1adc1r_mix[] = {
|
|
SOC_DAPM_SINGLE("ADC/DMIC Switch", WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC1_RIGHT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new aif1adc2l_mix[] = {
|
|
SOC_DAPM_SINGLE("DMIC Switch", WM8994_AIF1_ADC2_LEFT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC2_LEFT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new aif1adc2r_mix[] = {
|
|
SOC_DAPM_SINGLE("DMIC Switch", WM8994_AIF1_ADC2_RIGHT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF2 Switch", WM8994_AIF1_ADC2_RIGHT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new aif2dac2l_mix[] = {
|
|
SOC_DAPM_SINGLE("Right Sidetone Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
|
|
5, 1, 0),
|
|
SOC_DAPM_SINGLE("Left Sidetone Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
|
|
4, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF2 Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
|
|
2, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF1.2 Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF1.1 Switch", WM8994_DAC2_LEFT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new aif2dac2r_mix[] = {
|
|
SOC_DAPM_SINGLE("Right Sidetone Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
|
|
5, 1, 0),
|
|
SOC_DAPM_SINGLE("Left Sidetone Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
|
|
4, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF2 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
|
|
2, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF1.2 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
SOC_DAPM_SINGLE("AIF1.1 Switch", WM8994_DAC2_RIGHT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
#define WM8994_CLASS_W_SWITCH(xname, reg, shift, max, invert) \
|
|
SOC_SINGLE_EXT(xname, reg, shift, max, invert, \
|
|
snd_soc_dapm_get_volsw, wm8994_put_class_w)
|
|
|
|
static int wm8994_put_class_w(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
|
|
int ret;
|
|
|
|
ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
|
|
|
|
wm_hubs_update_class_w(component);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new dac1l_mix[] = {
|
|
WM8994_CLASS_W_SWITCH("Right Sidetone Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
5, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("Left Sidetone Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
4, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("AIF2 Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
2, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("AIF1.2 Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("AIF1.1 Switch", WM8994_DAC1_LEFT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const struct snd_kcontrol_new dac1r_mix[] = {
|
|
WM8994_CLASS_W_SWITCH("Right Sidetone Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
5, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("Left Sidetone Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
4, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("AIF2 Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
2, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("AIF1.2 Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
1, 1, 0),
|
|
WM8994_CLASS_W_SWITCH("AIF1.1 Switch", WM8994_DAC1_RIGHT_MIXER_ROUTING,
|
|
0, 1, 0),
|
|
};
|
|
|
|
static const char *sidetone_text[] = {
|
|
"ADC/DMIC1", "DMIC2",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(sidetone1_enum,
|
|
WM8994_SIDETONE, 0, sidetone_text);
|
|
|
|
static const struct snd_kcontrol_new sidetone1_mux =
|
|
SOC_DAPM_ENUM("Left Sidetone Mux", sidetone1_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(sidetone2_enum,
|
|
WM8994_SIDETONE, 1, sidetone_text);
|
|
|
|
static const struct snd_kcontrol_new sidetone2_mux =
|
|
SOC_DAPM_ENUM("Right Sidetone Mux", sidetone2_enum);
|
|
|
|
static const char *aif1dac_text[] = {
|
|
"AIF1DACDAT", "AIF3DACDAT",
|
|
};
|
|
|
|
static const char *loopback_text[] = {
|
|
"None", "ADCDAT",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1_loopback_enum,
|
|
WM8994_AIF1_CONTROL_2,
|
|
WM8994_AIF1_LOOPBACK_SHIFT,
|
|
loopback_text);
|
|
|
|
static const struct snd_kcontrol_new aif1_loopback =
|
|
SOC_DAPM_ENUM("AIF1 Loopback", aif1_loopback_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2_loopback_enum,
|
|
WM8994_AIF2_CONTROL_2,
|
|
WM8994_AIF2_LOOPBACK_SHIFT,
|
|
loopback_text);
|
|
|
|
static const struct snd_kcontrol_new aif2_loopback =
|
|
SOC_DAPM_ENUM("AIF2 Loopback", aif2_loopback_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif1dac_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 0, aif1dac_text);
|
|
|
|
static const struct snd_kcontrol_new aif1dac_mux =
|
|
SOC_DAPM_ENUM("AIF1DAC Mux", aif1dac_enum);
|
|
|
|
static const char *aif2dac_text[] = {
|
|
"AIF2DACDAT", "AIF3DACDAT",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2dac_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 1, aif2dac_text);
|
|
|
|
static const struct snd_kcontrol_new aif2dac_mux =
|
|
SOC_DAPM_ENUM("AIF2DAC Mux", aif2dac_enum);
|
|
|
|
static const char *aif2adc_text[] = {
|
|
"AIF2ADCDAT", "AIF3DACDAT",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2adc_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 2, aif2adc_text);
|
|
|
|
static const struct snd_kcontrol_new aif2adc_mux =
|
|
SOC_DAPM_ENUM("AIF2ADC Mux", aif2adc_enum);
|
|
|
|
static const char *aif3adc_text[] = {
|
|
"AIF1ADCDAT", "AIF2ADCDAT", "AIF2DACDAT", "Mono PCM",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(wm8994_aif3adc_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 3, aif3adc_text);
|
|
|
|
static const struct snd_kcontrol_new wm8994_aif3adc_mux =
|
|
SOC_DAPM_ENUM("AIF3ADC Mux", wm8994_aif3adc_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(wm8958_aif3adc_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 3, aif3adc_text);
|
|
|
|
static const struct snd_kcontrol_new wm8958_aif3adc_mux =
|
|
SOC_DAPM_ENUM("AIF3ADC Mux", wm8958_aif3adc_enum);
|
|
|
|
static const char *mono_pcm_out_text[] = {
|
|
"None", "AIF2ADCL", "AIF2ADCR",
|
|
};
|
|
|
|
static SOC_ENUM_SINGLE_DECL(mono_pcm_out_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 9, mono_pcm_out_text);
|
|
|
|
static const struct snd_kcontrol_new mono_pcm_out_mux =
|
|
SOC_DAPM_ENUM("Mono PCM Out Mux", mono_pcm_out_enum);
|
|
|
|
static const char *aif2dac_src_text[] = {
|
|
"AIF2", "AIF3",
|
|
};
|
|
|
|
/* Note that these two control shouldn't be simultaneously switched to AIF3 */
|
|
static SOC_ENUM_SINGLE_DECL(aif2dacl_src_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 7, aif2dac_src_text);
|
|
|
|
static const struct snd_kcontrol_new aif2dacl_src_mux =
|
|
SOC_DAPM_ENUM("AIF2DACL Mux", aif2dacl_src_enum);
|
|
|
|
static SOC_ENUM_SINGLE_DECL(aif2dacr_src_enum,
|
|
WM8994_POWER_MANAGEMENT_6, 8, aif2dac_src_text);
|
|
|
|
static const struct snd_kcontrol_new aif2dacr_src_mux =
|
|
SOC_DAPM_ENUM("AIF2DACR Mux", aif2dacr_src_enum);
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_lateclk_revd_widgets[] = {
|
|
SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_late_ev,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_late_ev,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
|
|
SND_SOC_DAPM_PGA_E("Late DAC1L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_PGA_E("Late DAC1R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_PGA_E("Late DAC2L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_PGA_E("Late DAC2R Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_PGA_E("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
|
|
SND_SOC_DAPM_MIXER_E("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
|
|
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer),
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_MIXER_E("SPKR", WM8994_POWER_MANAGEMENT_3, 9, 0,
|
|
right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer),
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_MUX_E("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpl_mux,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_MUX_E("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpr_mux,
|
|
late_enable_ev, SND_SOC_DAPM_PRE_PMU),
|
|
|
|
SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev)
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = {
|
|
SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0),
|
|
SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0,
|
|
left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
|
|
SND_SOC_DAPM_MIXER("SPKR", WM8994_POWER_MANAGEMENT_3, 9, 0,
|
|
right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
|
|
SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpl_mux),
|
|
SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, &wm_hubs_hpr_mux),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_dac_revd_widgets[] = {
|
|
SND_SOC_DAPM_DAC_E("DAC2L", NULL, SND_SOC_NOPM, 3, 0,
|
|
dac_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_DAC_E("DAC2R", NULL, SND_SOC_NOPM, 2, 0,
|
|
dac_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_DAC_E("DAC1L", NULL, SND_SOC_NOPM, 1, 0,
|
|
dac_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_DAC_E("DAC1R", NULL, SND_SOC_NOPM, 0, 0,
|
|
dac_ev, SND_SOC_DAPM_PRE_PMU),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_dac_widgets[] = {
|
|
SND_SOC_DAPM_DAC("DAC2L", NULL, WM8994_POWER_MANAGEMENT_5, 3, 0),
|
|
SND_SOC_DAPM_DAC("DAC2R", NULL, WM8994_POWER_MANAGEMENT_5, 2, 0),
|
|
SND_SOC_DAPM_DAC("DAC1L", NULL, WM8994_POWER_MANAGEMENT_5, 1, 0),
|
|
SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = {
|
|
SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux,
|
|
adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux,
|
|
adc_mux_ev, SND_SOC_DAPM_PRE_PMU),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = {
|
|
SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux),
|
|
SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = {
|
|
SND_SOC_DAPM_INPUT("DMIC1DAT"),
|
|
SND_SOC_DAPM_INPUT("DMIC2DAT"),
|
|
SND_SOC_DAPM_INPUT("Clock"),
|
|
|
|
SND_SOC_DAPM_SUPPLY_S("MICBIAS Supply", 1, SND_SOC_NOPM, 0, 0, micbias_ev,
|
|
SND_SOC_DAPM_PRE_PMU),
|
|
SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, vmid_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
|
|
|
SND_SOC_DAPM_SUPPLY("CLK_SYS", SND_SOC_NOPM, 0, 0, clk_sys_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
|
|
SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_SUPPLY("DSP1CLK", SND_SOC_NOPM, 3, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("DSP2CLK", SND_SOC_NOPM, 2, 0, NULL, 0),
|
|
SND_SOC_DAPM_SUPPLY("DSPINTCLK", SND_SOC_NOPM, 1, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", NULL,
|
|
0, SND_SOC_NOPM, 9, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", NULL,
|
|
0, SND_SOC_NOPM, 8, 0),
|
|
SND_SOC_DAPM_AIF_IN_E("AIF1DAC1L", NULL, 0,
|
|
SND_SOC_NOPM, 9, 0, wm8958_aif_ev,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_AIF_IN_E("AIF1DAC1R", NULL, 0,
|
|
SND_SOC_NOPM, 8, 0, wm8958_aif_ev,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
|
|
|
|
SND_SOC_DAPM_AIF_OUT("AIF1ADC2L", NULL,
|
|
0, SND_SOC_NOPM, 11, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF1ADC2R", NULL,
|
|
0, SND_SOC_NOPM, 10, 0),
|
|
SND_SOC_DAPM_AIF_IN_E("AIF1DAC2L", NULL, 0,
|
|
SND_SOC_NOPM, 11, 0, wm8958_aif_ev,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
|
|
SND_SOC_DAPM_AIF_IN_E("AIF1DAC2R", NULL, 0,
|
|
SND_SOC_NOPM, 10, 0, wm8958_aif_ev,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
|
|
|
|
SND_SOC_DAPM_MIXER("AIF1ADC1L Mixer", SND_SOC_NOPM, 0, 0,
|
|
aif1adc1l_mix, ARRAY_SIZE(aif1adc1l_mix)),
|
|
SND_SOC_DAPM_MIXER("AIF1ADC1R Mixer", SND_SOC_NOPM, 0, 0,
|
|
aif1adc1r_mix, ARRAY_SIZE(aif1adc1r_mix)),
|
|
|
|
SND_SOC_DAPM_MIXER("AIF1ADC2L Mixer", SND_SOC_NOPM, 0, 0,
|
|
aif1adc2l_mix, ARRAY_SIZE(aif1adc2l_mix)),
|
|
SND_SOC_DAPM_MIXER("AIF1ADC2R Mixer", SND_SOC_NOPM, 0, 0,
|
|
aif1adc2r_mix, ARRAY_SIZE(aif1adc2r_mix)),
|
|
|
|
SND_SOC_DAPM_MIXER("AIF2DAC2L Mixer", SND_SOC_NOPM, 0, 0,
|
|
aif2dac2l_mix, ARRAY_SIZE(aif2dac2l_mix)),
|
|
SND_SOC_DAPM_MIXER("AIF2DAC2R Mixer", SND_SOC_NOPM, 0, 0,
|
|
aif2dac2r_mix, ARRAY_SIZE(aif2dac2r_mix)),
|
|
|
|
SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &sidetone1_mux),
|
|
SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &sidetone2_mux),
|
|
|
|
SND_SOC_DAPM_MIXER("DAC1L Mixer", SND_SOC_NOPM, 0, 0,
|
|
dac1l_mix, ARRAY_SIZE(dac1l_mix)),
|
|
SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0,
|
|
dac1r_mix, ARRAY_SIZE(dac1r_mix)),
|
|
|
|
SND_SOC_DAPM_AIF_OUT("AIF2ADCL", NULL, 0,
|
|
SND_SOC_NOPM, 13, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF2ADCR", NULL, 0,
|
|
SND_SOC_NOPM, 12, 0),
|
|
SND_SOC_DAPM_AIF_IN_E("AIF2DACL", NULL, 0,
|
|
SND_SOC_NOPM, 13, 0, wm8958_aif_ev,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
SND_SOC_DAPM_AIF_IN_E("AIF2DACR", NULL, 0,
|
|
SND_SOC_NOPM, 12, 0, wm8958_aif_ev,
|
|
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
|
|
|
|
SND_SOC_DAPM_AIF_IN("AIF1DACDAT", NULL, 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_IN("AIF2DACDAT", NULL, 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF1ADCDAT", NULL, 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF2ADCDAT", NULL, 0, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("AIF1DAC Mux", SND_SOC_NOPM, 0, 0, &aif1dac_mux),
|
|
SND_SOC_DAPM_MUX("AIF2DAC Mux", SND_SOC_NOPM, 0, 0, &aif2dac_mux),
|
|
SND_SOC_DAPM_MUX("AIF2ADC Mux", SND_SOC_NOPM, 0, 0, &aif2adc_mux),
|
|
|
|
SND_SOC_DAPM_AIF_IN("AIF3DACDAT", NULL, 0, SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_AIF_OUT("AIF3ADCDAT", NULL, 0, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_SUPPLY("TOCLK", WM8994_CLOCKING_1, 4, 0, NULL, 0),
|
|
|
|
SND_SOC_DAPM_ADC("DMIC2L", NULL, WM8994_POWER_MANAGEMENT_4, 5, 0),
|
|
SND_SOC_DAPM_ADC("DMIC2R", NULL, WM8994_POWER_MANAGEMENT_4, 4, 0),
|
|
SND_SOC_DAPM_ADC("DMIC1L", NULL, WM8994_POWER_MANAGEMENT_4, 3, 0),
|
|
SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8994_POWER_MANAGEMENT_4, 2, 0),
|
|
|
|
/* Power is done with the muxes since the ADC power also controls the
|
|
* downsampling chain, the chip will automatically manage the analogue
|
|
* specific portions.
|
|
*/
|
|
SND_SOC_DAPM_ADC("ADCL", NULL, SND_SOC_NOPM, 1, 0),
|
|
SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_MUX("AIF1 Loopback", SND_SOC_NOPM, 0, 0, &aif1_loopback),
|
|
SND_SOC_DAPM_MUX("AIF2 Loopback", SND_SOC_NOPM, 0, 0, &aif2_loopback),
|
|
|
|
SND_SOC_DAPM_POST("Debug log", post_ev),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8994_specific_dapm_widgets[] = {
|
|
SND_SOC_DAPM_MUX("AIF3ADC Mux", SND_SOC_NOPM, 0, 0, &wm8994_aif3adc_mux),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_widget wm8958_dapm_widgets[] = {
|
|
SND_SOC_DAPM_SUPPLY("AIF3", WM8994_POWER_MANAGEMENT_6, 5, 1, NULL, 0),
|
|
SND_SOC_DAPM_MUX("Mono PCM Out Mux", SND_SOC_NOPM, 0, 0, &mono_pcm_out_mux),
|
|
SND_SOC_DAPM_MUX("AIF2DACL Mux", SND_SOC_NOPM, 0, 0, &aif2dacl_src_mux),
|
|
SND_SOC_DAPM_MUX("AIF2DACR Mux", SND_SOC_NOPM, 0, 0, &aif2dacr_src_mux),
|
|
SND_SOC_DAPM_MUX("AIF3ADC Mux", SND_SOC_NOPM, 0, 0, &wm8958_aif3adc_mux),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
{ "CLK_SYS", NULL, "AIF1CLK", check_clk_sys },
|
|
{ "CLK_SYS", NULL, "AIF2CLK", check_clk_sys },
|
|
|
|
{ "DSP1CLK", NULL, "CLK_SYS" },
|
|
{ "DSP2CLK", NULL, "CLK_SYS" },
|
|
{ "DSPINTCLK", NULL, "CLK_SYS" },
|
|
|
|
{ "AIF1ADC1L", NULL, "AIF1CLK" },
|
|
{ "AIF1ADC1L", NULL, "DSP1CLK" },
|
|
{ "AIF1ADC1R", NULL, "AIF1CLK" },
|
|
{ "AIF1ADC1R", NULL, "DSP1CLK" },
|
|
{ "AIF1ADC1R", NULL, "DSPINTCLK" },
|
|
|
|
{ "AIF1DAC1L", NULL, "AIF1CLK" },
|
|
{ "AIF1DAC1L", NULL, "DSP1CLK" },
|
|
{ "AIF1DAC1R", NULL, "AIF1CLK" },
|
|
{ "AIF1DAC1R", NULL, "DSP1CLK" },
|
|
{ "AIF1DAC1R", NULL, "DSPINTCLK" },
|
|
|
|
{ "AIF1ADC2L", NULL, "AIF1CLK" },
|
|
{ "AIF1ADC2L", NULL, "DSP1CLK" },
|
|
{ "AIF1ADC2R", NULL, "AIF1CLK" },
|
|
{ "AIF1ADC2R", NULL, "DSP1CLK" },
|
|
{ "AIF1ADC2R", NULL, "DSPINTCLK" },
|
|
|
|
{ "AIF1DAC2L", NULL, "AIF1CLK" },
|
|
{ "AIF1DAC2L", NULL, "DSP1CLK" },
|
|
{ "AIF1DAC2R", NULL, "AIF1CLK" },
|
|
{ "AIF1DAC2R", NULL, "DSP1CLK" },
|
|
{ "AIF1DAC2R", NULL, "DSPINTCLK" },
|
|
|
|
{ "AIF2ADCL", NULL, "AIF2CLK" },
|
|
{ "AIF2ADCL", NULL, "DSP2CLK" },
|
|
{ "AIF2ADCR", NULL, "AIF2CLK" },
|
|
{ "AIF2ADCR", NULL, "DSP2CLK" },
|
|
{ "AIF2ADCR", NULL, "DSPINTCLK" },
|
|
|
|
{ "AIF2DACL", NULL, "AIF2CLK" },
|
|
{ "AIF2DACL", NULL, "DSP2CLK" },
|
|
{ "AIF2DACR", NULL, "AIF2CLK" },
|
|
{ "AIF2DACR", NULL, "DSP2CLK" },
|
|
{ "AIF2DACR", NULL, "DSPINTCLK" },
|
|
|
|
{ "DMIC1L", NULL, "DMIC1DAT" },
|
|
{ "DMIC1L", NULL, "CLK_SYS" },
|
|
{ "DMIC1R", NULL, "DMIC1DAT" },
|
|
{ "DMIC1R", NULL, "CLK_SYS" },
|
|
{ "DMIC2L", NULL, "DMIC2DAT" },
|
|
{ "DMIC2L", NULL, "CLK_SYS" },
|
|
{ "DMIC2R", NULL, "DMIC2DAT" },
|
|
{ "DMIC2R", NULL, "CLK_SYS" },
|
|
|
|
{ "ADCL", NULL, "AIF1CLK" },
|
|
{ "ADCL", NULL, "DSP1CLK" },
|
|
{ "ADCL", NULL, "DSPINTCLK" },
|
|
|
|
{ "ADCR", NULL, "AIF1CLK" },
|
|
{ "ADCR", NULL, "DSP1CLK" },
|
|
{ "ADCR", NULL, "DSPINTCLK" },
|
|
|
|
{ "ADCL Mux", "ADC", "ADCL" },
|
|
{ "ADCL Mux", "DMIC", "DMIC1L" },
|
|
{ "ADCR Mux", "ADC", "ADCR" },
|
|
{ "ADCR Mux", "DMIC", "DMIC1R" },
|
|
|
|
{ "DAC1L", NULL, "AIF1CLK" },
|
|
{ "DAC1L", NULL, "DSP1CLK" },
|
|
{ "DAC1L", NULL, "DSPINTCLK" },
|
|
|
|
{ "DAC1R", NULL, "AIF1CLK" },
|
|
{ "DAC1R", NULL, "DSP1CLK" },
|
|
{ "DAC1R", NULL, "DSPINTCLK" },
|
|
|
|
{ "DAC2L", NULL, "AIF2CLK" },
|
|
{ "DAC2L", NULL, "DSP2CLK" },
|
|
{ "DAC2L", NULL, "DSPINTCLK" },
|
|
|
|
{ "DAC2R", NULL, "AIF2DACR" },
|
|
{ "DAC2R", NULL, "AIF2CLK" },
|
|
{ "DAC2R", NULL, "DSP2CLK" },
|
|
{ "DAC2R", NULL, "DSPINTCLK" },
|
|
|
|
{ "TOCLK", NULL, "CLK_SYS" },
|
|
|
|
{ "AIF1DACDAT", NULL, "AIF1 Playback" },
|
|
{ "AIF2DACDAT", NULL, "AIF2 Playback" },
|
|
{ "AIF3DACDAT", NULL, "AIF3 Playback" },
|
|
|
|
{ "AIF1 Capture", NULL, "AIF1ADCDAT" },
|
|
{ "AIF2 Capture", NULL, "AIF2ADCDAT" },
|
|
{ "AIF3 Capture", NULL, "AIF3ADCDAT" },
|
|
|
|
/* AIF1 outputs */
|
|
{ "AIF1ADC1L", NULL, "AIF1ADC1L Mixer" },
|
|
{ "AIF1ADC1L Mixer", "ADC/DMIC Switch", "ADCL Mux" },
|
|
{ "AIF1ADC1L Mixer", "AIF2 Switch", "AIF2DACL" },
|
|
|
|
{ "AIF1ADC1R", NULL, "AIF1ADC1R Mixer" },
|
|
{ "AIF1ADC1R Mixer", "ADC/DMIC Switch", "ADCR Mux" },
|
|
{ "AIF1ADC1R Mixer", "AIF2 Switch", "AIF2DACR" },
|
|
|
|
{ "AIF1ADC2L", NULL, "AIF1ADC2L Mixer" },
|
|
{ "AIF1ADC2L Mixer", "DMIC Switch", "DMIC2L" },
|
|
{ "AIF1ADC2L Mixer", "AIF2 Switch", "AIF2DACL" },
|
|
|
|
{ "AIF1ADC2R", NULL, "AIF1ADC2R Mixer" },
|
|
{ "AIF1ADC2R Mixer", "DMIC Switch", "DMIC2R" },
|
|
{ "AIF1ADC2R Mixer", "AIF2 Switch", "AIF2DACR" },
|
|
|
|
/* Pin level routing for AIF3 */
|
|
{ "AIF1DAC1L", NULL, "AIF1DAC Mux" },
|
|
{ "AIF1DAC1R", NULL, "AIF1DAC Mux" },
|
|
{ "AIF1DAC2L", NULL, "AIF1DAC Mux" },
|
|
{ "AIF1DAC2R", NULL, "AIF1DAC Mux" },
|
|
|
|
{ "AIF1DAC Mux", "AIF1DACDAT", "AIF1 Loopback" },
|
|
{ "AIF1DAC Mux", "AIF3DACDAT", "AIF3DACDAT" },
|
|
{ "AIF2DAC Mux", "AIF2DACDAT", "AIF2 Loopback" },
|
|
{ "AIF2DAC Mux", "AIF3DACDAT", "AIF3DACDAT" },
|
|
{ "AIF2ADC Mux", "AIF2ADCDAT", "AIF2ADCL" },
|
|
{ "AIF2ADC Mux", "AIF2ADCDAT", "AIF2ADCR" },
|
|
{ "AIF2ADC Mux", "AIF3DACDAT", "AIF3ADCDAT" },
|
|
|
|
/* DAC1 inputs */
|
|
{ "DAC1L Mixer", "AIF2 Switch", "AIF2DACL" },
|
|
{ "DAC1L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
|
|
{ "DAC1L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
|
|
{ "DAC1L Mixer", "Left Sidetone Switch", "Left Sidetone" },
|
|
{ "DAC1L Mixer", "Right Sidetone Switch", "Right Sidetone" },
|
|
|
|
{ "DAC1R Mixer", "AIF2 Switch", "AIF2DACR" },
|
|
{ "DAC1R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
|
|
{ "DAC1R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
|
|
{ "DAC1R Mixer", "Left Sidetone Switch", "Left Sidetone" },
|
|
{ "DAC1R Mixer", "Right Sidetone Switch", "Right Sidetone" },
|
|
|
|
/* DAC2/AIF2 outputs */
|
|
{ "AIF2ADCL", NULL, "AIF2DAC2L Mixer" },
|
|
{ "AIF2DAC2L Mixer", "AIF2 Switch", "AIF2DACL" },
|
|
{ "AIF2DAC2L Mixer", "AIF1.2 Switch", "AIF1DAC2L" },
|
|
{ "AIF2DAC2L Mixer", "AIF1.1 Switch", "AIF1DAC1L" },
|
|
{ "AIF2DAC2L Mixer", "Left Sidetone Switch", "Left Sidetone" },
|
|
{ "AIF2DAC2L Mixer", "Right Sidetone Switch", "Right Sidetone" },
|
|
|
|
{ "AIF2ADCR", NULL, "AIF2DAC2R Mixer" },
|
|
{ "AIF2DAC2R Mixer", "AIF2 Switch", "AIF2DACR" },
|
|
{ "AIF2DAC2R Mixer", "AIF1.2 Switch", "AIF1DAC2R" },
|
|
{ "AIF2DAC2R Mixer", "AIF1.1 Switch", "AIF1DAC1R" },
|
|
{ "AIF2DAC2R Mixer", "Left Sidetone Switch", "Left Sidetone" },
|
|
{ "AIF2DAC2R Mixer", "Right Sidetone Switch", "Right Sidetone" },
|
|
|
|
{ "AIF1ADCDAT", NULL, "AIF1ADC1L" },
|
|
{ "AIF1ADCDAT", NULL, "AIF1ADC1R" },
|
|
{ "AIF1ADCDAT", NULL, "AIF1ADC2L" },
|
|
{ "AIF1ADCDAT", NULL, "AIF1ADC2R" },
|
|
|
|
{ "AIF2ADCDAT", NULL, "AIF2ADC Mux" },
|
|
|
|
/* AIF3 output */
|
|
{ "AIF3ADC Mux", "AIF1ADCDAT", "AIF1ADC1L" },
|
|
{ "AIF3ADC Mux", "AIF1ADCDAT", "AIF1ADC1R" },
|
|
{ "AIF3ADC Mux", "AIF1ADCDAT", "AIF1ADC2L" },
|
|
{ "AIF3ADC Mux", "AIF1ADCDAT", "AIF1ADC2R" },
|
|
{ "AIF3ADC Mux", "AIF2ADCDAT", "AIF2ADCL" },
|
|
{ "AIF3ADC Mux", "AIF2ADCDAT", "AIF2ADCR" },
|
|
{ "AIF3ADC Mux", "AIF2DACDAT", "AIF2DACL" },
|
|
{ "AIF3ADC Mux", "AIF2DACDAT", "AIF2DACR" },
|
|
|
|
{ "AIF3ADCDAT", NULL, "AIF3ADC Mux" },
|
|
|
|
/* Loopback */
|
|
{ "AIF1 Loopback", "ADCDAT", "AIF1ADCDAT" },
|
|
{ "AIF1 Loopback", "None", "AIF1DACDAT" },
|
|
{ "AIF2 Loopback", "ADCDAT", "AIF2ADCDAT" },
|
|
{ "AIF2 Loopback", "None", "AIF2DACDAT" },
|
|
|
|
/* Sidetone */
|
|
{ "Left Sidetone", "ADC/DMIC1", "ADCL Mux" },
|
|
{ "Left Sidetone", "DMIC2", "DMIC2L" },
|
|
{ "Right Sidetone", "ADC/DMIC1", "ADCR Mux" },
|
|
{ "Right Sidetone", "DMIC2", "DMIC2R" },
|
|
|
|
/* Output stages */
|
|
{ "Left Output Mixer", "DAC Switch", "DAC1L" },
|
|
{ "Right Output Mixer", "DAC Switch", "DAC1R" },
|
|
|
|
{ "SPKL", "DAC1 Switch", "DAC1L" },
|
|
{ "SPKL", "DAC2 Switch", "DAC2L" },
|
|
|
|
{ "SPKR", "DAC1 Switch", "DAC1R" },
|
|
{ "SPKR", "DAC2 Switch", "DAC2R" },
|
|
|
|
{ "Left Headphone Mux", "DAC", "DAC1L" },
|
|
{ "Right Headphone Mux", "DAC", "DAC1R" },
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8994_lateclk_revd_intercon[] = {
|
|
{ "DAC1L", NULL, "Late DAC1L Enable PGA" },
|
|
{ "Late DAC1L Enable PGA", NULL, "DAC1L Mixer" },
|
|
{ "DAC1R", NULL, "Late DAC1R Enable PGA" },
|
|
{ "Late DAC1R Enable PGA", NULL, "DAC1R Mixer" },
|
|
{ "DAC2L", NULL, "Late DAC2L Enable PGA" },
|
|
{ "Late DAC2L Enable PGA", NULL, "AIF2DAC2L Mixer" },
|
|
{ "DAC2R", NULL, "Late DAC2R Enable PGA" },
|
|
{ "Late DAC2R Enable PGA", NULL, "AIF2DAC2R Mixer" }
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8994_lateclk_intercon[] = {
|
|
{ "DAC1L", NULL, "DAC1L Mixer" },
|
|
{ "DAC1R", NULL, "DAC1R Mixer" },
|
|
{ "DAC2L", NULL, "AIF2DAC2L Mixer" },
|
|
{ "DAC2R", NULL, "AIF2DAC2R Mixer" },
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8994_revd_intercon[] = {
|
|
{ "AIF1DACDAT", NULL, "AIF2DACDAT" },
|
|
{ "AIF2DACDAT", NULL, "AIF1DACDAT" },
|
|
{ "AIF1ADCDAT", NULL, "AIF2ADCDAT" },
|
|
{ "AIF2ADCDAT", NULL, "AIF1ADCDAT" },
|
|
{ "MICBIAS1", NULL, "CLK_SYS" },
|
|
{ "MICBIAS1", NULL, "MICBIAS Supply" },
|
|
{ "MICBIAS2", NULL, "CLK_SYS" },
|
|
{ "MICBIAS2", NULL, "MICBIAS Supply" },
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8994_intercon[] = {
|
|
{ "AIF2DACL", NULL, "AIF2DAC Mux" },
|
|
{ "AIF2DACR", NULL, "AIF2DAC Mux" },
|
|
{ "MICBIAS1", NULL, "VMID" },
|
|
{ "MICBIAS2", NULL, "VMID" },
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm8958_intercon[] = {
|
|
{ "AIF2DACL", NULL, "AIF2DACL Mux" },
|
|
{ "AIF2DACR", NULL, "AIF2DACR Mux" },
|
|
|
|
{ "AIF2DACL Mux", "AIF2", "AIF2DAC Mux" },
|
|
{ "AIF2DACL Mux", "AIF3", "AIF3DACDAT" },
|
|
{ "AIF2DACR Mux", "AIF2", "AIF2DAC Mux" },
|
|
{ "AIF2DACR Mux", "AIF3", "AIF3DACDAT" },
|
|
|
|
{ "AIF3DACDAT", NULL, "AIF3" },
|
|
{ "AIF3ADCDAT", NULL, "AIF3" },
|
|
|
|
{ "Mono PCM Out Mux", "AIF2ADCL", "AIF2ADCL" },
|
|
{ "Mono PCM Out Mux", "AIF2ADCR", "AIF2ADCR" },
|
|
|
|
{ "AIF3ADC Mux", "Mono PCM", "Mono PCM Out Mux" },
|
|
};
|
|
|
|
/* The size in bits of the FLL divide multiplied by 10
|
|
* to allow rounding later */
|
|
#define FIXED_FLL_SIZE ((1 << 16) * 10)
|
|
|
|
struct fll_div {
|
|
u16 outdiv;
|
|
u16 n;
|
|
u16 k;
|
|
u16 lambda;
|
|
u16 clk_ref_div;
|
|
u16 fll_fratio;
|
|
};
|
|
|
|
static int wm8994_get_fll_config(struct wm8994 *control, struct fll_div *fll,
|
|
int freq_in, int freq_out)
|
|
{
|
|
u64 Kpart;
|
|
unsigned int K, Ndiv, Nmod, gcd_fll;
|
|
|
|
pr_debug("FLL input=%dHz, output=%dHz\n", freq_in, freq_out);
|
|
|
|
/* Scale the input frequency down to <= 13.5MHz */
|
|
fll->clk_ref_div = 0;
|
|
while (freq_in > 13500000) {
|
|
fll->clk_ref_div++;
|
|
freq_in /= 2;
|
|
|
|
if (fll->clk_ref_div > 3)
|
|
return -EINVAL;
|
|
}
|
|
pr_debug("CLK_REF_DIV=%d, Fref=%dHz\n", fll->clk_ref_div, freq_in);
|
|
|
|
/* Scale the output to give 90MHz<=Fvco<=100MHz */
|
|
fll->outdiv = 3;
|
|
while (freq_out * (fll->outdiv + 1) < 90000000) {
|
|
fll->outdiv++;
|
|
if (fll->outdiv > 63)
|
|
return -EINVAL;
|
|
}
|
|
freq_out *= fll->outdiv + 1;
|
|
pr_debug("OUTDIV=%d, Fvco=%dHz\n", fll->outdiv, freq_out);
|
|
|
|
if (freq_in > 1000000) {
|
|
fll->fll_fratio = 0;
|
|
} else if (freq_in > 256000) {
|
|
fll->fll_fratio = 1;
|
|
freq_in *= 2;
|
|
} else if (freq_in > 128000) {
|
|
fll->fll_fratio = 2;
|
|
freq_in *= 4;
|
|
} else if (freq_in > 64000) {
|
|
fll->fll_fratio = 3;
|
|
freq_in *= 8;
|
|
} else {
|
|
fll->fll_fratio = 4;
|
|
freq_in *= 16;
|
|
}
|
|
pr_debug("FLL_FRATIO=%d, Fref=%dHz\n", fll->fll_fratio, freq_in);
|
|
|
|
/* Now, calculate N.K */
|
|
Ndiv = freq_out / freq_in;
|
|
|
|
fll->n = Ndiv;
|
|
Nmod = freq_out % freq_in;
|
|
pr_debug("Nmod=%d\n", Nmod);
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
/* Calculate fractional part - scale up so we can round. */
|
|
Kpart = FIXED_FLL_SIZE * (long long)Nmod;
|
|
|
|
do_div(Kpart, freq_in);
|
|
|
|
K = Kpart & 0xFFFFFFFF;
|
|
|
|
if ((K % 10) >= 5)
|
|
K += 5;
|
|
|
|
/* Move down to proper range now rounding is done */
|
|
fll->k = K / 10;
|
|
fll->lambda = 0;
|
|
|
|
pr_debug("N=%x K=%x\n", fll->n, fll->k);
|
|
break;
|
|
|
|
default:
|
|
gcd_fll = gcd(freq_out, freq_in);
|
|
|
|
fll->k = (freq_out - (freq_in * fll->n)) / gcd_fll;
|
|
fll->lambda = freq_in / gcd_fll;
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int _wm8994_set_fll(struct snd_soc_component *component, int id, int src,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int reg_offset, ret;
|
|
struct fll_div fll;
|
|
u16 reg, clk1, aif_reg, aif_src;
|
|
unsigned long timeout;
|
|
bool was_enabled;
|
|
|
|
switch (id) {
|
|
case WM8994_FLL1:
|
|
reg_offset = 0;
|
|
id = 0;
|
|
aif_src = 0x10;
|
|
break;
|
|
case WM8994_FLL2:
|
|
reg_offset = 0x20;
|
|
id = 1;
|
|
aif_src = 0x18;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg = snd_soc_component_read32(component, WM8994_FLL1_CONTROL_1 + reg_offset);
|
|
was_enabled = reg & WM8994_FLL1_ENA;
|
|
|
|
switch (src) {
|
|
case 0:
|
|
/* Allow no source specification when stopping */
|
|
if (freq_out)
|
|
return -EINVAL;
|
|
src = wm8994->fll[id].src;
|
|
break;
|
|
case WM8994_FLL_SRC_MCLK1:
|
|
case WM8994_FLL_SRC_MCLK2:
|
|
case WM8994_FLL_SRC_LRCLK:
|
|
case WM8994_FLL_SRC_BCLK:
|
|
break;
|
|
case WM8994_FLL_SRC_INTERNAL:
|
|
freq_in = 12000000;
|
|
freq_out = 12000000;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Are we changing anything? */
|
|
if (wm8994->fll[id].src == src &&
|
|
wm8994->fll[id].in == freq_in && wm8994->fll[id].out == freq_out)
|
|
return 0;
|
|
|
|
/* If we're stopping the FLL redo the old config - no
|
|
* registers will actually be written but we avoid GCC flow
|
|
* analysis bugs spewing warnings.
|
|
*/
|
|
if (freq_out)
|
|
ret = wm8994_get_fll_config(control, &fll, freq_in, freq_out);
|
|
else
|
|
ret = wm8994_get_fll_config(control, &fll, wm8994->fll[id].in,
|
|
wm8994->fll[id].out);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Make sure that we're not providing SYSCLK right now */
|
|
clk1 = snd_soc_component_read32(component, WM8994_CLOCKING_1);
|
|
if (clk1 & WM8994_SYSCLK_SRC)
|
|
aif_reg = WM8994_AIF2_CLOCKING_1;
|
|
else
|
|
aif_reg = WM8994_AIF1_CLOCKING_1;
|
|
reg = snd_soc_component_read32(component, aif_reg);
|
|
|
|
if ((reg & WM8994_AIF1CLK_ENA) &&
|
|
(reg & WM8994_AIF1CLK_SRC_MASK) == aif_src) {
|
|
dev_err(component->dev, "FLL%d is currently providing SYSCLK\n",
|
|
id + 1);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* We always need to disable the FLL while reconfiguring */
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_1 + reg_offset,
|
|
WM8994_FLL1_ENA, 0);
|
|
|
|
if (wm8994->fll_byp && src == WM8994_FLL_SRC_BCLK &&
|
|
freq_in == freq_out && freq_out) {
|
|
dev_dbg(component->dev, "Bypassing FLL%d\n", id + 1);
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_5 + reg_offset,
|
|
WM8958_FLL1_BYP, WM8958_FLL1_BYP);
|
|
goto out;
|
|
}
|
|
|
|
reg = (fll.outdiv << WM8994_FLL1_OUTDIV_SHIFT) |
|
|
(fll.fll_fratio << WM8994_FLL1_FRATIO_SHIFT);
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_2 + reg_offset,
|
|
WM8994_FLL1_OUTDIV_MASK |
|
|
WM8994_FLL1_FRATIO_MASK, reg);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_3 + reg_offset,
|
|
WM8994_FLL1_K_MASK, fll.k);
|
|
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_4 + reg_offset,
|
|
WM8994_FLL1_N_MASK,
|
|
fll.n << WM8994_FLL1_N_SHIFT);
|
|
|
|
if (fll.lambda) {
|
|
snd_soc_component_update_bits(component, WM8958_FLL1_EFS_1 + reg_offset,
|
|
WM8958_FLL1_LAMBDA_MASK,
|
|
fll.lambda);
|
|
snd_soc_component_update_bits(component, WM8958_FLL1_EFS_2 + reg_offset,
|
|
WM8958_FLL1_EFS_ENA, WM8958_FLL1_EFS_ENA);
|
|
} else {
|
|
snd_soc_component_update_bits(component, WM8958_FLL1_EFS_2 + reg_offset,
|
|
WM8958_FLL1_EFS_ENA, 0);
|
|
}
|
|
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_5 + reg_offset,
|
|
WM8994_FLL1_FRC_NCO | WM8958_FLL1_BYP |
|
|
WM8994_FLL1_REFCLK_DIV_MASK |
|
|
WM8994_FLL1_REFCLK_SRC_MASK,
|
|
((src == WM8994_FLL_SRC_INTERNAL)
|
|
<< WM8994_FLL1_FRC_NCO_SHIFT) |
|
|
(fll.clk_ref_div << WM8994_FLL1_REFCLK_DIV_SHIFT) |
|
|
(src - 1));
|
|
|
|
/* Clear any pending completion from a previous failure */
|
|
try_wait_for_completion(&wm8994->fll_locked[id]);
|
|
|
|
/* Enable (with fractional mode if required) */
|
|
if (freq_out) {
|
|
/* Enable VMID if we need it */
|
|
if (!was_enabled) {
|
|
active_reference(component);
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
vmid_reference(component);
|
|
break;
|
|
case WM8958:
|
|
if (control->revision < 1)
|
|
vmid_reference(component);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
reg = WM8994_FLL1_ENA;
|
|
|
|
if (fll.k)
|
|
reg |= WM8994_FLL1_FRAC;
|
|
if (src == WM8994_FLL_SRC_INTERNAL)
|
|
reg |= WM8994_FLL1_OSC_ENA;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_FLL1_CONTROL_1 + reg_offset,
|
|
WM8994_FLL1_ENA | WM8994_FLL1_OSC_ENA |
|
|
WM8994_FLL1_FRAC, reg);
|
|
|
|
if (wm8994->fll_locked_irq) {
|
|
timeout = wait_for_completion_timeout(&wm8994->fll_locked[id],
|
|
msecs_to_jiffies(10));
|
|
if (timeout == 0)
|
|
dev_warn(component->dev,
|
|
"Timed out waiting for FLL lock\n");
|
|
} else {
|
|
msleep(5);
|
|
}
|
|
} else {
|
|
if (was_enabled) {
|
|
switch (control->type) {
|
|
case WM8994:
|
|
vmid_dereference(component);
|
|
break;
|
|
case WM8958:
|
|
if (control->revision < 1)
|
|
vmid_dereference(component);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
active_dereference(component);
|
|
}
|
|
}
|
|
|
|
out:
|
|
wm8994->fll[id].in = freq_in;
|
|
wm8994->fll[id].out = freq_out;
|
|
wm8994->fll[id].src = src;
|
|
|
|
configure_clock(component);
|
|
|
|
/*
|
|
* If SYSCLK will be less than 50kHz adjust AIFnCLK dividers
|
|
* for detection.
|
|
*/
|
|
if (max(wm8994->aifclk[0], wm8994->aifclk[1]) < 50000) {
|
|
dev_dbg(component->dev, "Configuring AIFs for 128fs\n");
|
|
|
|
wm8994->aifdiv[0] = snd_soc_component_read32(component, WM8994_AIF1_RATE)
|
|
& WM8994_AIF1CLK_RATE_MASK;
|
|
wm8994->aifdiv[1] = snd_soc_component_read32(component, WM8994_AIF2_RATE)
|
|
& WM8994_AIF1CLK_RATE_MASK;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_RATE,
|
|
WM8994_AIF1CLK_RATE_MASK, 0x1);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_RATE,
|
|
WM8994_AIF2CLK_RATE_MASK, 0x1);
|
|
} else if (wm8994->aifdiv[0]) {
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_RATE,
|
|
WM8994_AIF1CLK_RATE_MASK,
|
|
wm8994->aifdiv[0]);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_RATE,
|
|
WM8994_AIF2CLK_RATE_MASK,
|
|
wm8994->aifdiv[1]);
|
|
|
|
wm8994->aifdiv[0] = 0;
|
|
wm8994->aifdiv[1] = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t wm8994_fll_locked_irq(int irq, void *data)
|
|
{
|
|
struct completion *completion = data;
|
|
|
|
complete(completion);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
|
|
|
|
static int wm8994_set_fll(struct snd_soc_dai *dai, int id, int src,
|
|
unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
return _wm8994_set_fll(dai->component, id, src, freq_in, freq_out);
|
|
}
|
|
|
|
static int wm8994_set_dai_sysclk(struct snd_soc_dai *dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int i;
|
|
|
|
switch (dai->id) {
|
|
case 1:
|
|
case 2:
|
|
break;
|
|
|
|
default:
|
|
/* AIF3 shares clocking with AIF1/2 */
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (clk_id) {
|
|
case WM8994_SYSCLK_MCLK1:
|
|
wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK1;
|
|
wm8994->mclk[0] = freq;
|
|
dev_dbg(dai->dev, "AIF%d using MCLK1 at %uHz\n",
|
|
dai->id, freq);
|
|
break;
|
|
|
|
case WM8994_SYSCLK_MCLK2:
|
|
/* TODO: Set GPIO AF */
|
|
wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_MCLK2;
|
|
wm8994->mclk[1] = freq;
|
|
dev_dbg(dai->dev, "AIF%d using MCLK2 at %uHz\n",
|
|
dai->id, freq);
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL1:
|
|
wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_FLL1;
|
|
dev_dbg(dai->dev, "AIF%d using FLL1\n", dai->id);
|
|
break;
|
|
|
|
case WM8994_SYSCLK_FLL2:
|
|
wm8994->sysclk[dai->id - 1] = WM8994_SYSCLK_FLL2;
|
|
dev_dbg(dai->dev, "AIF%d using FLL2\n", dai->id);
|
|
break;
|
|
|
|
case WM8994_SYSCLK_OPCLK:
|
|
/* Special case - a division (times 10) is given and
|
|
* no effect on main clocking.
|
|
*/
|
|
if (freq) {
|
|
for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
|
|
if (opclk_divs[i] == freq)
|
|
break;
|
|
if (i == ARRAY_SIZE(opclk_divs))
|
|
return -EINVAL;
|
|
snd_soc_component_update_bits(component, WM8994_CLOCKING_2,
|
|
WM8994_OPCLK_DIV_MASK, i);
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_2,
|
|
WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
|
|
} else {
|
|
snd_soc_component_update_bits(component, WM8994_POWER_MANAGEMENT_2,
|
|
WM8994_OPCLK_ENA, 0);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
configure_clock(component);
|
|
|
|
/*
|
|
* If SYSCLK will be less than 50kHz adjust AIFnCLK dividers
|
|
* for detection.
|
|
*/
|
|
if (max(wm8994->aifclk[0], wm8994->aifclk[1]) < 50000) {
|
|
dev_dbg(component->dev, "Configuring AIFs for 128fs\n");
|
|
|
|
wm8994->aifdiv[0] = snd_soc_component_read32(component, WM8994_AIF1_RATE)
|
|
& WM8994_AIF1CLK_RATE_MASK;
|
|
wm8994->aifdiv[1] = snd_soc_component_read32(component, WM8994_AIF2_RATE)
|
|
& WM8994_AIF1CLK_RATE_MASK;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_RATE,
|
|
WM8994_AIF1CLK_RATE_MASK, 0x1);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_RATE,
|
|
WM8994_AIF2CLK_RATE_MASK, 0x1);
|
|
} else if (wm8994->aifdiv[0]) {
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_RATE,
|
|
WM8994_AIF1CLK_RATE_MASK,
|
|
wm8994->aifdiv[0]);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_RATE,
|
|
WM8994_AIF2CLK_RATE_MASK,
|
|
wm8994->aifdiv[1]);
|
|
|
|
wm8994->aifdiv[0] = 0;
|
|
wm8994->aifdiv[1] = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
|
|
wm_hubs_set_bias_level(component, level);
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
/* MICBIAS into regulating mode */
|
|
switch (control->type) {
|
|
case WM8958:
|
|
case WM1811:
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS1,
|
|
WM8958_MICB1_MODE, 0);
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
|
|
WM8958_MICB2_MODE, 0);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY)
|
|
active_reference(component);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
|
|
switch (control->type) {
|
|
case WM8958:
|
|
if (control->revision == 0) {
|
|
/* Optimise performance for rev A */
|
|
snd_soc_component_update_bits(component,
|
|
WM8958_CHARGE_PUMP_2,
|
|
WM8958_CP_DISCH,
|
|
WM8958_CP_DISCH);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Discharge LINEOUT1 & 2 */
|
|
snd_soc_component_update_bits(component, WM8994_ANTIPOP_1,
|
|
WM8994_LINEOUT1_DISCH |
|
|
WM8994_LINEOUT2_DISCH,
|
|
WM8994_LINEOUT1_DISCH |
|
|
WM8994_LINEOUT2_DISCH);
|
|
}
|
|
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_PREPARE)
|
|
active_dereference(component);
|
|
|
|
/* MICBIAS into bypass mode on newer devices */
|
|
switch (control->type) {
|
|
case WM8958:
|
|
case WM1811:
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS1,
|
|
WM8958_MICB1_MODE,
|
|
WM8958_MICB1_MODE);
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
|
|
WM8958_MICB2_MODE,
|
|
WM8958_MICB2_MODE);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_STANDBY)
|
|
wm8994->cur_fw = NULL;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int wm8994_vmid_mode(struct snd_soc_component *component, enum wm8994_vmid_mode mode)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
|
|
switch (mode) {
|
|
case WM8994_VMID_NORMAL:
|
|
snd_soc_dapm_mutex_lock(dapm);
|
|
|
|
if (wm8994->hubs.lineout1_se) {
|
|
snd_soc_dapm_disable_pin_unlocked(dapm,
|
|
"LINEOUT1N Driver");
|
|
snd_soc_dapm_disable_pin_unlocked(dapm,
|
|
"LINEOUT1P Driver");
|
|
}
|
|
if (wm8994->hubs.lineout2_se) {
|
|
snd_soc_dapm_disable_pin_unlocked(dapm,
|
|
"LINEOUT2N Driver");
|
|
snd_soc_dapm_disable_pin_unlocked(dapm,
|
|
"LINEOUT2P Driver");
|
|
}
|
|
|
|
/* Do the sync with the old mode to allow it to clean up */
|
|
snd_soc_dapm_sync_unlocked(dapm);
|
|
wm8994->vmid_mode = mode;
|
|
|
|
snd_soc_dapm_mutex_unlock(dapm);
|
|
break;
|
|
|
|
case WM8994_VMID_FORCE:
|
|
snd_soc_dapm_mutex_lock(dapm);
|
|
|
|
if (wm8994->hubs.lineout1_se) {
|
|
snd_soc_dapm_force_enable_pin_unlocked(dapm,
|
|
"LINEOUT1N Driver");
|
|
snd_soc_dapm_force_enable_pin_unlocked(dapm,
|
|
"LINEOUT1P Driver");
|
|
}
|
|
if (wm8994->hubs.lineout2_se) {
|
|
snd_soc_dapm_force_enable_pin_unlocked(dapm,
|
|
"LINEOUT2N Driver");
|
|
snd_soc_dapm_force_enable_pin_unlocked(dapm,
|
|
"LINEOUT2P Driver");
|
|
}
|
|
|
|
wm8994->vmid_mode = mode;
|
|
snd_soc_dapm_sync_unlocked(dapm);
|
|
|
|
snd_soc_dapm_mutex_unlock(dapm);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int ms_reg;
|
|
int aif1_reg;
|
|
int dac_reg;
|
|
int adc_reg;
|
|
int ms = 0;
|
|
int aif1 = 0;
|
|
int lrclk = 0;
|
|
|
|
switch (dai->id) {
|
|
case 1:
|
|
ms_reg = WM8994_AIF1_MASTER_SLAVE;
|
|
aif1_reg = WM8994_AIF1_CONTROL_1;
|
|
dac_reg = WM8994_AIF1DAC_LRCLK;
|
|
adc_reg = WM8994_AIF1ADC_LRCLK;
|
|
break;
|
|
case 2:
|
|
ms_reg = WM8994_AIF2_MASTER_SLAVE;
|
|
aif1_reg = WM8994_AIF2_CONTROL_1;
|
|
dac_reg = WM8994_AIF1DAC_LRCLK;
|
|
adc_reg = WM8994_AIF1ADC_LRCLK;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
ms = WM8994_AIF1_MSTR;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
aif1 |= WM8994_AIF1_LRCLK_INV;
|
|
lrclk |= WM8958_AIF1_LRCLK_INV;
|
|
/* fall through */
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
aif1 |= 0x18;
|
|
break;
|
|
case SND_SOC_DAIFMT_I2S:
|
|
aif1 |= 0x10;
|
|
break;
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
break;
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
aif1 |= 0x8;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
/* frame inversion not valid for DSP modes */
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif1 |= WM8994_AIF1_BCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_RIGHT_J:
|
|
case SND_SOC_DAIFMT_LEFT_J:
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
aif1 |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
|
|
lrclk |= WM8958_AIF1_LRCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
aif1 |= WM8994_AIF1_BCLK_INV;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
aif1 |= WM8994_AIF1_LRCLK_INV;
|
|
lrclk |= WM8958_AIF1_LRCLK_INV;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The AIF2 format configuration needs to be mirrored to AIF3
|
|
* on WM8958 if it's in use so just do it all the time. */
|
|
switch (control->type) {
|
|
case WM1811:
|
|
case WM8958:
|
|
if (dai->id == 2)
|
|
snd_soc_component_update_bits(component, WM8958_AIF3_CONTROL_1,
|
|
WM8994_AIF1_LRCLK_INV |
|
|
WM8958_AIF3_FMT_MASK, aif1);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
snd_soc_component_update_bits(component, aif1_reg,
|
|
WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV |
|
|
WM8994_AIF1_FMT_MASK,
|
|
aif1);
|
|
snd_soc_component_update_bits(component, ms_reg, WM8994_AIF1_MSTR,
|
|
ms);
|
|
snd_soc_component_update_bits(component, dac_reg,
|
|
WM8958_AIF1_LRCLK_INV, lrclk);
|
|
snd_soc_component_update_bits(component, adc_reg,
|
|
WM8958_AIF1_LRCLK_INV, lrclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct {
|
|
int val, rate;
|
|
} srs[] = {
|
|
{ 0, 8000 },
|
|
{ 1, 11025 },
|
|
{ 2, 12000 },
|
|
{ 3, 16000 },
|
|
{ 4, 22050 },
|
|
{ 5, 24000 },
|
|
{ 6, 32000 },
|
|
{ 7, 44100 },
|
|
{ 8, 48000 },
|
|
{ 9, 88200 },
|
|
{ 10, 96000 },
|
|
};
|
|
|
|
static int fs_ratios[] = {
|
|
64, 128, 192, 256, 384, 512, 768, 1024, 1408, 1536
|
|
};
|
|
|
|
static int bclk_divs[] = {
|
|
10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
|
|
640, 880, 960, 1280, 1760, 1920
|
|
};
|
|
|
|
static int wm8994_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
int aif1_reg;
|
|
int aif2_reg;
|
|
int bclk_reg;
|
|
int lrclk_reg;
|
|
int rate_reg;
|
|
int aif1 = 0;
|
|
int aif2 = 0;
|
|
int bclk = 0;
|
|
int lrclk = 0;
|
|
int rate_val = 0;
|
|
int id = dai->id - 1;
|
|
|
|
int i, cur_val, best_val, bclk_rate, best;
|
|
|
|
switch (dai->id) {
|
|
case 1:
|
|
aif1_reg = WM8994_AIF1_CONTROL_1;
|
|
aif2_reg = WM8994_AIF1_CONTROL_2;
|
|
bclk_reg = WM8994_AIF1_BCLK;
|
|
rate_reg = WM8994_AIF1_RATE;
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
|
|
wm8994->lrclk_shared[0]) {
|
|
lrclk_reg = WM8994_AIF1DAC_LRCLK;
|
|
} else {
|
|
lrclk_reg = WM8994_AIF1ADC_LRCLK;
|
|
dev_dbg(component->dev, "AIF1 using split LRCLK\n");
|
|
}
|
|
break;
|
|
case 2:
|
|
aif1_reg = WM8994_AIF2_CONTROL_1;
|
|
aif2_reg = WM8994_AIF2_CONTROL_2;
|
|
bclk_reg = WM8994_AIF2_BCLK;
|
|
rate_reg = WM8994_AIF2_RATE;
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK ||
|
|
wm8994->lrclk_shared[1]) {
|
|
lrclk_reg = WM8994_AIF2DAC_LRCLK;
|
|
} else {
|
|
lrclk_reg = WM8994_AIF2ADC_LRCLK;
|
|
dev_dbg(component->dev, "AIF2 using split LRCLK\n");
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
bclk_rate = params_rate(params);
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
bclk_rate *= 16;
|
|
break;
|
|
case 20:
|
|
bclk_rate *= 20;
|
|
aif1 |= 0x20;
|
|
break;
|
|
case 24:
|
|
bclk_rate *= 24;
|
|
aif1 |= 0x40;
|
|
break;
|
|
case 32:
|
|
bclk_rate *= 32;
|
|
aif1 |= 0x60;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
wm8994->channels[id] = params_channels(params);
|
|
if (pdata->max_channels_clocked[id] &&
|
|
wm8994->channels[id] > pdata->max_channels_clocked[id]) {
|
|
dev_dbg(dai->dev, "Constraining channels to %d from %d\n",
|
|
pdata->max_channels_clocked[id], wm8994->channels[id]);
|
|
wm8994->channels[id] = pdata->max_channels_clocked[id];
|
|
}
|
|
|
|
switch (wm8994->channels[id]) {
|
|
case 1:
|
|
case 2:
|
|
bclk_rate *= 2;
|
|
break;
|
|
default:
|
|
bclk_rate *= 4;
|
|
break;
|
|
}
|
|
|
|
/* Try to find an appropriate sample rate; look for an exact match. */
|
|
for (i = 0; i < ARRAY_SIZE(srs); i++)
|
|
if (srs[i].rate == params_rate(params))
|
|
break;
|
|
if (i == ARRAY_SIZE(srs))
|
|
return -EINVAL;
|
|
rate_val |= srs[i].val << WM8994_AIF1_SR_SHIFT;
|
|
|
|
dev_dbg(dai->dev, "Sample rate is %dHz\n", srs[i].rate);
|
|
dev_dbg(dai->dev, "AIF%dCLK is %dHz, target BCLK %dHz\n",
|
|
dai->id, wm8994->aifclk[id], bclk_rate);
|
|
|
|
if (wm8994->channels[id] == 1 &&
|
|
(snd_soc_component_read32(component, aif1_reg) & 0x18) == 0x18)
|
|
aif2 |= WM8994_AIF1_MONO;
|
|
|
|
if (wm8994->aifclk[id] == 0) {
|
|
dev_err(dai->dev, "AIF%dCLK not configured\n", dai->id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* AIFCLK/fs ratio; look for a close match in either direction */
|
|
best = 0;
|
|
best_val = abs((fs_ratios[0] * params_rate(params))
|
|
- wm8994->aifclk[id]);
|
|
for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
|
|
cur_val = abs((fs_ratios[i] * params_rate(params))
|
|
- wm8994->aifclk[id]);
|
|
if (cur_val >= best_val)
|
|
continue;
|
|
best = i;
|
|
best_val = cur_val;
|
|
}
|
|
dev_dbg(dai->dev, "Selected AIF%dCLK/fs = %d\n",
|
|
dai->id, fs_ratios[best]);
|
|
rate_val |= best;
|
|
|
|
/* We may not get quite the right frequency if using
|
|
* approximate clocks so look for the closest match that is
|
|
* higher than the target (we need to ensure that there enough
|
|
* BCLKs to clock out the samples).
|
|
*/
|
|
best = 0;
|
|
for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
|
|
cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
|
|
if (cur_val < 0) /* BCLK table is sorted */
|
|
break;
|
|
best = i;
|
|
}
|
|
bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
|
|
dev_dbg(dai->dev, "Using BCLK_DIV %d for actual BCLK %dHz\n",
|
|
bclk_divs[best], bclk_rate);
|
|
bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
|
|
|
|
lrclk = bclk_rate / params_rate(params);
|
|
if (!lrclk) {
|
|
dev_err(dai->dev, "Unable to generate LRCLK from %dHz BCLK\n",
|
|
bclk_rate);
|
|
return -EINVAL;
|
|
}
|
|
dev_dbg(dai->dev, "Using LRCLK rate %d for actual LRCLK %dHz\n",
|
|
lrclk, bclk_rate / lrclk);
|
|
|
|
snd_soc_component_update_bits(component, aif1_reg, WM8994_AIF1_WL_MASK, aif1);
|
|
snd_soc_component_update_bits(component, aif2_reg, WM8994_AIF1_MONO, aif2);
|
|
snd_soc_component_update_bits(component, bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
|
|
snd_soc_component_update_bits(component, lrclk_reg, WM8994_AIF1DAC_RATE_MASK,
|
|
lrclk);
|
|
snd_soc_component_update_bits(component, rate_reg, WM8994_AIF1_SR_MASK |
|
|
WM8994_AIF1CLK_RATE_MASK, rate_val);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
switch (dai->id) {
|
|
case 1:
|
|
wm8994->dac_rates[0] = params_rate(params);
|
|
wm8994_set_retune_mobile(component, 0);
|
|
wm8994_set_retune_mobile(component, 1);
|
|
break;
|
|
case 2:
|
|
wm8994->dac_rates[1] = params_rate(params);
|
|
wm8994_set_retune_mobile(component, 2);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_aif3_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int aif1_reg;
|
|
int aif1 = 0;
|
|
|
|
switch (dai->id) {
|
|
case 3:
|
|
switch (control->type) {
|
|
case WM1811:
|
|
case WM8958:
|
|
aif1_reg = WM8958_AIF3_CONTROL_1;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
switch (params_width(params)) {
|
|
case 16:
|
|
break;
|
|
case 20:
|
|
aif1 |= 0x20;
|
|
break;
|
|
case 24:
|
|
aif1 |= 0x40;
|
|
break;
|
|
case 32:
|
|
aif1 |= 0x60;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return snd_soc_component_update_bits(component, aif1_reg, WM8994_AIF1_WL_MASK, aif1);
|
|
}
|
|
|
|
static int wm8994_aif_mute(struct snd_soc_dai *codec_dai, int mute)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
int mute_reg;
|
|
int reg;
|
|
|
|
switch (codec_dai->id) {
|
|
case 1:
|
|
mute_reg = WM8994_AIF1_DAC1_FILTERS_1;
|
|
break;
|
|
case 2:
|
|
mute_reg = WM8994_AIF2_DAC_FILTERS_1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mute)
|
|
reg = WM8994_AIF1DAC1_MUTE;
|
|
else
|
|
reg = 0;
|
|
|
|
snd_soc_component_update_bits(component, mute_reg, WM8994_AIF1DAC1_MUTE, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_set_tristate(struct snd_soc_dai *codec_dai, int tristate)
|
|
{
|
|
struct snd_soc_component *component = codec_dai->component;
|
|
int reg, val, mask;
|
|
|
|
switch (codec_dai->id) {
|
|
case 1:
|
|
reg = WM8994_AIF1_MASTER_SLAVE;
|
|
mask = WM8994_AIF1_TRI;
|
|
break;
|
|
case 2:
|
|
reg = WM8994_AIF2_MASTER_SLAVE;
|
|
mask = WM8994_AIF2_TRI;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (tristate)
|
|
val = mask;
|
|
else
|
|
val = 0;
|
|
|
|
return snd_soc_component_update_bits(component, reg, mask, val);
|
|
}
|
|
|
|
static int wm8994_aif2_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
|
|
/* Disable the pulls on the AIF if we're using it to save power. */
|
|
snd_soc_component_update_bits(component, WM8994_GPIO_3,
|
|
WM8994_GPN_PU | WM8994_GPN_PD, 0);
|
|
snd_soc_component_update_bits(component, WM8994_GPIO_4,
|
|
WM8994_GPN_PU | WM8994_GPN_PD, 0);
|
|
snd_soc_component_update_bits(component, WM8994_GPIO_5,
|
|
WM8994_GPN_PU | WM8994_GPN_PD, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define WM8994_RATES SNDRV_PCM_RATE_8000_96000
|
|
|
|
#define WM8994_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops wm8994_aif1_dai_ops = {
|
|
.set_sysclk = wm8994_set_dai_sysclk,
|
|
.set_fmt = wm8994_set_dai_fmt,
|
|
.hw_params = wm8994_hw_params,
|
|
.digital_mute = wm8994_aif_mute,
|
|
.set_pll = wm8994_set_fll,
|
|
.set_tristate = wm8994_set_tristate,
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops wm8994_aif2_dai_ops = {
|
|
.set_sysclk = wm8994_set_dai_sysclk,
|
|
.set_fmt = wm8994_set_dai_fmt,
|
|
.hw_params = wm8994_hw_params,
|
|
.digital_mute = wm8994_aif_mute,
|
|
.set_pll = wm8994_set_fll,
|
|
.set_tristate = wm8994_set_tristate,
|
|
};
|
|
|
|
static const struct snd_soc_dai_ops wm8994_aif3_dai_ops = {
|
|
.hw_params = wm8994_aif3_hw_params,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8994_dai[] = {
|
|
{
|
|
.name = "wm8994-aif1",
|
|
.id = 1,
|
|
.playback = {
|
|
.stream_name = "AIF1 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8994_RATES,
|
|
.formats = WM8994_FORMATS,
|
|
.sig_bits = 24,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AIF1 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8994_RATES,
|
|
.formats = WM8994_FORMATS,
|
|
.sig_bits = 24,
|
|
},
|
|
.ops = &wm8994_aif1_dai_ops,
|
|
},
|
|
{
|
|
.name = "wm8994-aif2",
|
|
.id = 2,
|
|
.playback = {
|
|
.stream_name = "AIF2 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8994_RATES,
|
|
.formats = WM8994_FORMATS,
|
|
.sig_bits = 24,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AIF2 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8994_RATES,
|
|
.formats = WM8994_FORMATS,
|
|
.sig_bits = 24,
|
|
},
|
|
.probe = wm8994_aif2_probe,
|
|
.ops = &wm8994_aif2_dai_ops,
|
|
},
|
|
{
|
|
.name = "wm8994-aif3",
|
|
.id = 3,
|
|
.playback = {
|
|
.stream_name = "AIF3 Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8994_RATES,
|
|
.formats = WM8994_FORMATS,
|
|
.sig_bits = 24,
|
|
},
|
|
.capture = {
|
|
.stream_name = "AIF3 Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM8994_RATES,
|
|
.formats = WM8994_FORMATS,
|
|
.sig_bits = 24,
|
|
},
|
|
.ops = &wm8994_aif3_dai_ops,
|
|
}
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wm8994_component_suspend(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
|
|
memcpy(&wm8994->fll_suspend[i], &wm8994->fll[i],
|
|
sizeof(struct wm8994_fll_config));
|
|
ret = _wm8994_set_fll(component, i + 1, 0, 0, 0);
|
|
if (ret < 0)
|
|
dev_warn(component->dev, "Failed to stop FLL%d: %d\n",
|
|
i + 1, ret);
|
|
}
|
|
|
|
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_component_resume(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8994->fll); i++) {
|
|
if (!wm8994->fll_suspend[i].out)
|
|
continue;
|
|
|
|
ret = _wm8994_set_fll(component, i + 1,
|
|
wm8994->fll_suspend[i].src,
|
|
wm8994->fll_suspend[i].in,
|
|
wm8994->fll_suspend[i].out);
|
|
if (ret < 0)
|
|
dev_warn(component->dev, "Failed to restore FLL%d: %d\n",
|
|
i + 1, ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define wm8994_component_suspend NULL
|
|
#define wm8994_component_resume NULL
|
|
#endif
|
|
|
|
static void wm8994_handle_retune_mobile_pdata(struct wm8994_priv *wm8994)
|
|
{
|
|
struct snd_soc_component *component = wm8994->hubs.component;
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
struct snd_kcontrol_new controls[] = {
|
|
SOC_ENUM_EXT("AIF1.1 EQ Mode",
|
|
wm8994->retune_mobile_enum,
|
|
wm8994_get_retune_mobile_enum,
|
|
wm8994_put_retune_mobile_enum),
|
|
SOC_ENUM_EXT("AIF1.2 EQ Mode",
|
|
wm8994->retune_mobile_enum,
|
|
wm8994_get_retune_mobile_enum,
|
|
wm8994_put_retune_mobile_enum),
|
|
SOC_ENUM_EXT("AIF2 EQ Mode",
|
|
wm8994->retune_mobile_enum,
|
|
wm8994_get_retune_mobile_enum,
|
|
wm8994_put_retune_mobile_enum),
|
|
};
|
|
int ret, i, j;
|
|
const char **t;
|
|
|
|
/* We need an array of texts for the enum API but the number
|
|
* of texts is likely to be less than the number of
|
|
* configurations due to the sample rate dependency of the
|
|
* configurations. */
|
|
wm8994->num_retune_mobile_texts = 0;
|
|
wm8994->retune_mobile_texts = NULL;
|
|
for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
|
|
for (j = 0; j < wm8994->num_retune_mobile_texts; j++) {
|
|
if (strcmp(pdata->retune_mobile_cfgs[i].name,
|
|
wm8994->retune_mobile_texts[j]) == 0)
|
|
break;
|
|
}
|
|
|
|
if (j != wm8994->num_retune_mobile_texts)
|
|
continue;
|
|
|
|
/* Expand the array... */
|
|
t = krealloc(wm8994->retune_mobile_texts,
|
|
sizeof(char *) *
|
|
(wm8994->num_retune_mobile_texts + 1),
|
|
GFP_KERNEL);
|
|
if (t == NULL)
|
|
continue;
|
|
|
|
/* ...store the new entry... */
|
|
t[wm8994->num_retune_mobile_texts] =
|
|
pdata->retune_mobile_cfgs[i].name;
|
|
|
|
/* ...and remember the new version. */
|
|
wm8994->num_retune_mobile_texts++;
|
|
wm8994->retune_mobile_texts = t;
|
|
}
|
|
|
|
dev_dbg(component->dev, "Allocated %d unique ReTune Mobile names\n",
|
|
wm8994->num_retune_mobile_texts);
|
|
|
|
wm8994->retune_mobile_enum.items = wm8994->num_retune_mobile_texts;
|
|
wm8994->retune_mobile_enum.texts = wm8994->retune_mobile_texts;
|
|
|
|
ret = snd_soc_add_component_controls(wm8994->hubs.component, controls,
|
|
ARRAY_SIZE(controls));
|
|
if (ret != 0)
|
|
dev_err(wm8994->hubs.component->dev,
|
|
"Failed to add ReTune Mobile controls: %d\n", ret);
|
|
}
|
|
|
|
static void wm8994_handle_pdata(struct wm8994_priv *wm8994)
|
|
{
|
|
struct snd_soc_component *component = wm8994->hubs.component;
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct wm8994_pdata *pdata = &control->pdata;
|
|
int ret, i;
|
|
|
|
if (!pdata)
|
|
return;
|
|
|
|
wm_hubs_handle_analogue_pdata(component, pdata->lineout1_diff,
|
|
pdata->lineout2_diff,
|
|
pdata->lineout1fb,
|
|
pdata->lineout2fb,
|
|
pdata->jd_scthr,
|
|
pdata->jd_thr,
|
|
pdata->micb1_delay,
|
|
pdata->micb2_delay,
|
|
pdata->micbias1_lvl,
|
|
pdata->micbias2_lvl);
|
|
|
|
dev_dbg(component->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
|
|
|
|
if (pdata->num_drc_cfgs) {
|
|
struct snd_kcontrol_new controls[] = {
|
|
SOC_ENUM_EXT("AIF1DRC1 Mode", wm8994->drc_enum,
|
|
wm8994_get_drc_enum, wm8994_put_drc_enum),
|
|
SOC_ENUM_EXT("AIF1DRC2 Mode", wm8994->drc_enum,
|
|
wm8994_get_drc_enum, wm8994_put_drc_enum),
|
|
SOC_ENUM_EXT("AIF2DRC Mode", wm8994->drc_enum,
|
|
wm8994_get_drc_enum, wm8994_put_drc_enum),
|
|
};
|
|
|
|
/* We need an array of texts for the enum API */
|
|
wm8994->drc_texts = devm_kcalloc(wm8994->hubs.component->dev,
|
|
pdata->num_drc_cfgs, sizeof(char *), GFP_KERNEL);
|
|
if (!wm8994->drc_texts)
|
|
return;
|
|
|
|
for (i = 0; i < pdata->num_drc_cfgs; i++)
|
|
wm8994->drc_texts[i] = pdata->drc_cfgs[i].name;
|
|
|
|
wm8994->drc_enum.items = pdata->num_drc_cfgs;
|
|
wm8994->drc_enum.texts = wm8994->drc_texts;
|
|
|
|
ret = snd_soc_add_component_controls(wm8994->hubs.component, controls,
|
|
ARRAY_SIZE(controls));
|
|
for (i = 0; i < WM8994_NUM_DRC; i++)
|
|
wm8994_set_drc(component, i);
|
|
} else {
|
|
ret = snd_soc_add_component_controls(wm8994->hubs.component,
|
|
wm8994_drc_controls,
|
|
ARRAY_SIZE(wm8994_drc_controls));
|
|
}
|
|
|
|
if (ret != 0)
|
|
dev_err(wm8994->hubs.component->dev,
|
|
"Failed to add DRC mode controls: %d\n", ret);
|
|
|
|
|
|
dev_dbg(component->dev, "%d ReTune Mobile configurations\n",
|
|
pdata->num_retune_mobile_cfgs);
|
|
|
|
if (pdata->num_retune_mobile_cfgs)
|
|
wm8994_handle_retune_mobile_pdata(wm8994);
|
|
else
|
|
snd_soc_add_component_controls(wm8994->hubs.component, wm8994_eq_controls,
|
|
ARRAY_SIZE(wm8994_eq_controls));
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pdata->micbias); i++) {
|
|
if (pdata->micbias[i]) {
|
|
snd_soc_component_write(component, WM8958_MICBIAS1 + i,
|
|
pdata->micbias[i] & 0xffff);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* wm8994_mic_detect - Enable microphone detection via the WM8994 IRQ
|
|
*
|
|
* @component: WM8994 component
|
|
* @jack: jack to report detection events on
|
|
* @micbias: microphone bias to detect on
|
|
*
|
|
* Enable microphone detection via IRQ on the WM8994. If GPIOs are
|
|
* being used to bring out signals to the processor then only platform
|
|
* data configuration is needed for WM8994 and processor GPIOs should
|
|
* be configured using snd_soc_jack_add_gpios() instead.
|
|
*
|
|
* Configuration of detection levels is available via the micbias1_lvl
|
|
* and micbias2_lvl platform data members.
|
|
*/
|
|
int wm8994_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
|
|
int micbias)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994_micdet *micdet;
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int reg, ret;
|
|
|
|
if (control->type != WM8994) {
|
|
dev_warn(component->dev, "Not a WM8994\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (micbias) {
|
|
case 1:
|
|
micdet = &wm8994->micdet[0];
|
|
if (jack)
|
|
ret = snd_soc_dapm_force_enable_pin(dapm, "MICBIAS1");
|
|
else
|
|
ret = snd_soc_dapm_disable_pin(dapm, "MICBIAS1");
|
|
break;
|
|
case 2:
|
|
micdet = &wm8994->micdet[1];
|
|
if (jack)
|
|
ret = snd_soc_dapm_force_enable_pin(dapm, "MICBIAS1");
|
|
else
|
|
ret = snd_soc_dapm_disable_pin(dapm, "MICBIAS1");
|
|
break;
|
|
default:
|
|
dev_warn(component->dev, "Invalid MICBIAS %d\n", micbias);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret != 0)
|
|
dev_warn(component->dev, "Failed to configure MICBIAS%d: %d\n",
|
|
micbias, ret);
|
|
|
|
dev_dbg(component->dev, "Configuring microphone detection on %d %p\n",
|
|
micbias, jack);
|
|
|
|
/* Store the configuration */
|
|
micdet->jack = jack;
|
|
micdet->detecting = true;
|
|
|
|
/* If either of the jacks is set up then enable detection */
|
|
if (wm8994->micdet[0].jack || wm8994->micdet[1].jack)
|
|
reg = WM8994_MICD_ENA;
|
|
else
|
|
reg = 0;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_MICBIAS, WM8994_MICD_ENA, reg);
|
|
|
|
/* enable MICDET and MICSHRT deboune */
|
|
snd_soc_component_update_bits(component, WM8994_IRQ_DEBOUNCE,
|
|
WM8994_MIC1_DET_DB_MASK | WM8994_MIC1_SHRT_DB_MASK |
|
|
WM8994_MIC2_DET_DB_MASK | WM8994_MIC2_SHRT_DB_MASK,
|
|
WM8994_MIC1_DET_DB | WM8994_MIC1_SHRT_DB);
|
|
|
|
snd_soc_dapm_sync(dapm);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8994_mic_detect);
|
|
|
|
static void wm8994_mic_work(struct work_struct *work)
|
|
{
|
|
struct wm8994_priv *priv = container_of(work,
|
|
struct wm8994_priv,
|
|
mic_work.work);
|
|
struct regmap *regmap = priv->wm8994->regmap;
|
|
struct device *dev = priv->wm8994->dev;
|
|
unsigned int reg;
|
|
int ret;
|
|
int report;
|
|
|
|
pm_runtime_get_sync(dev);
|
|
|
|
ret = regmap_read(regmap, WM8994_INTERRUPT_RAW_STATUS_2, ®);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to read microphone status: %d\n",
|
|
ret);
|
|
pm_runtime_put(dev);
|
|
return;
|
|
}
|
|
|
|
dev_dbg(dev, "Microphone status: %x\n", reg);
|
|
|
|
report = 0;
|
|
if (reg & WM8994_MIC1_DET_STS) {
|
|
if (priv->micdet[0].detecting)
|
|
report = SND_JACK_HEADSET;
|
|
}
|
|
if (reg & WM8994_MIC1_SHRT_STS) {
|
|
if (priv->micdet[0].detecting)
|
|
report = SND_JACK_HEADPHONE;
|
|
else
|
|
report |= SND_JACK_BTN_0;
|
|
}
|
|
if (report)
|
|
priv->micdet[0].detecting = false;
|
|
else
|
|
priv->micdet[0].detecting = true;
|
|
|
|
snd_soc_jack_report(priv->micdet[0].jack, report,
|
|
SND_JACK_HEADSET | SND_JACK_BTN_0);
|
|
|
|
report = 0;
|
|
if (reg & WM8994_MIC2_DET_STS) {
|
|
if (priv->micdet[1].detecting)
|
|
report = SND_JACK_HEADSET;
|
|
}
|
|
if (reg & WM8994_MIC2_SHRT_STS) {
|
|
if (priv->micdet[1].detecting)
|
|
report = SND_JACK_HEADPHONE;
|
|
else
|
|
report |= SND_JACK_BTN_0;
|
|
}
|
|
if (report)
|
|
priv->micdet[1].detecting = false;
|
|
else
|
|
priv->micdet[1].detecting = true;
|
|
|
|
snd_soc_jack_report(priv->micdet[1].jack, report,
|
|
SND_JACK_HEADSET | SND_JACK_BTN_0);
|
|
|
|
pm_runtime_put(dev);
|
|
}
|
|
|
|
static irqreturn_t wm8994_mic_irq(int irq, void *data)
|
|
{
|
|
struct wm8994_priv *priv = data;
|
|
struct snd_soc_component *component = priv->hubs.component;
|
|
|
|
#ifndef CONFIG_SND_SOC_WM8994_MODULE
|
|
trace_snd_soc_jack_irq(dev_name(component->dev));
|
|
#endif
|
|
|
|
pm_wakeup_event(component->dev, 300);
|
|
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&priv->mic_work, msecs_to_jiffies(250));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Should be called with accdet_lock held */
|
|
static void wm1811_micd_stop(struct snd_soc_component *component)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
if (!wm8994->jackdet)
|
|
return;
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_1, WM8958_MICD_ENA, 0);
|
|
|
|
wm1811_jackdet_set_mode(component, WM1811_JACKDET_MODE_JACK);
|
|
|
|
if (wm8994->wm8994->pdata.jd_ext_cap)
|
|
snd_soc_dapm_disable_pin(dapm, "MICBIAS2");
|
|
}
|
|
|
|
static void wm8958_button_det(struct snd_soc_component *component, u16 status)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
int report;
|
|
|
|
report = 0;
|
|
if (status & 0x4)
|
|
report |= SND_JACK_BTN_0;
|
|
|
|
if (status & 0x8)
|
|
report |= SND_JACK_BTN_1;
|
|
|
|
if (status & 0x10)
|
|
report |= SND_JACK_BTN_2;
|
|
|
|
if (status & 0x20)
|
|
report |= SND_JACK_BTN_3;
|
|
|
|
if (status & 0x40)
|
|
report |= SND_JACK_BTN_4;
|
|
|
|
if (status & 0x80)
|
|
report |= SND_JACK_BTN_5;
|
|
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, report,
|
|
wm8994->btn_mask);
|
|
}
|
|
|
|
static void wm8958_open_circuit_work(struct work_struct *work)
|
|
{
|
|
struct wm8994_priv *wm8994 = container_of(work,
|
|
struct wm8994_priv,
|
|
open_circuit_work.work);
|
|
struct device *dev = wm8994->wm8994->dev;
|
|
|
|
mutex_lock(&wm8994->accdet_lock);
|
|
|
|
wm1811_micd_stop(wm8994->hubs.component);
|
|
|
|
dev_dbg(dev, "Reporting open circuit\n");
|
|
|
|
wm8994->jack_mic = false;
|
|
wm8994->mic_detecting = true;
|
|
|
|
wm8958_micd_set_rate(wm8994->hubs.component);
|
|
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, 0,
|
|
wm8994->btn_mask |
|
|
SND_JACK_HEADSET);
|
|
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
}
|
|
|
|
static void wm8958_mic_id(void *data, u16 status)
|
|
{
|
|
struct snd_soc_component *component = data;
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
|
|
/* Either nothing present or just starting detection */
|
|
if (!(status & WM8958_MICD_STS)) {
|
|
/* If nothing present then clear our statuses */
|
|
dev_dbg(component->dev, "Detected open circuit\n");
|
|
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&wm8994->open_circuit_work,
|
|
msecs_to_jiffies(2500));
|
|
return;
|
|
}
|
|
|
|
/* If the measurement is showing a high impedence we've got a
|
|
* microphone.
|
|
*/
|
|
if (status & 0x600) {
|
|
dev_dbg(component->dev, "Detected microphone\n");
|
|
|
|
wm8994->mic_detecting = false;
|
|
wm8994->jack_mic = true;
|
|
|
|
wm8958_micd_set_rate(component);
|
|
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, SND_JACK_HEADSET,
|
|
SND_JACK_HEADSET);
|
|
}
|
|
|
|
|
|
if (status & 0xfc) {
|
|
dev_dbg(component->dev, "Detected headphone\n");
|
|
wm8994->mic_detecting = false;
|
|
|
|
wm8958_micd_set_rate(component);
|
|
|
|
/* If we have jackdet that will detect removal */
|
|
wm1811_micd_stop(component);
|
|
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, SND_JACK_HEADPHONE,
|
|
SND_JACK_HEADSET);
|
|
}
|
|
}
|
|
|
|
/* Deferred mic detection to allow for extra settling time */
|
|
static void wm1811_mic_work(struct work_struct *work)
|
|
{
|
|
struct wm8994_priv *wm8994 = container_of(work, struct wm8994_priv,
|
|
mic_work.work);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct snd_soc_component *component = wm8994->hubs.component;
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
/* If required for an external cap force MICBIAS on */
|
|
if (control->pdata.jd_ext_cap) {
|
|
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS2");
|
|
snd_soc_dapm_sync(dapm);
|
|
}
|
|
|
|
mutex_lock(&wm8994->accdet_lock);
|
|
|
|
dev_dbg(component->dev, "Starting mic detection\n");
|
|
|
|
/* Use a user-supplied callback if we have one */
|
|
if (wm8994->micd_cb) {
|
|
wm8994->micd_cb(wm8994->micd_cb_data);
|
|
} else {
|
|
/*
|
|
* Start off measument of microphone impedence to find out
|
|
* what's actually there.
|
|
*/
|
|
wm8994->mic_detecting = true;
|
|
wm1811_jackdet_set_mode(component, WM1811_JACKDET_MODE_MIC);
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_1,
|
|
WM8958_MICD_ENA, WM8958_MICD_ENA);
|
|
}
|
|
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
|
|
pm_runtime_put(component->dev);
|
|
}
|
|
|
|
static irqreturn_t wm1811_jackdet_irq(int irq, void *data)
|
|
{
|
|
struct wm8994_priv *wm8994 = data;
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
struct snd_soc_component *component = wm8994->hubs.component;
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
int reg, delay;
|
|
bool present;
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
cancel_delayed_work_sync(&wm8994->mic_complete_work);
|
|
|
|
mutex_lock(&wm8994->accdet_lock);
|
|
|
|
reg = snd_soc_component_read32(component, WM1811_JACKDET_CTRL);
|
|
if (reg < 0) {
|
|
dev_err(component->dev, "Failed to read jack status: %d\n", reg);
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
pm_runtime_put(component->dev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
dev_dbg(component->dev, "JACKDET %x\n", reg);
|
|
|
|
present = reg & WM1811_JACKDET_LVL;
|
|
|
|
if (present) {
|
|
dev_dbg(component->dev, "Jack detected\n");
|
|
|
|
wm8958_micd_set_rate(component);
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
|
|
WM8958_MICB2_DISCH, 0);
|
|
|
|
/* Disable debounce while inserted */
|
|
snd_soc_component_update_bits(component, WM1811_JACKDET_CTRL,
|
|
WM1811_JACKDET_DB, 0);
|
|
|
|
delay = control->pdata.micdet_delay;
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&wm8994->mic_work,
|
|
msecs_to_jiffies(delay));
|
|
} else {
|
|
dev_dbg(component->dev, "Jack not detected\n");
|
|
|
|
cancel_delayed_work_sync(&wm8994->mic_work);
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
|
|
WM8958_MICB2_DISCH, WM8958_MICB2_DISCH);
|
|
|
|
/* Enable debounce while removed */
|
|
snd_soc_component_update_bits(component, WM1811_JACKDET_CTRL,
|
|
WM1811_JACKDET_DB, WM1811_JACKDET_DB);
|
|
|
|
wm8994->mic_detecting = false;
|
|
wm8994->jack_mic = false;
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_1,
|
|
WM8958_MICD_ENA, 0);
|
|
wm1811_jackdet_set_mode(component, WM1811_JACKDET_MODE_JACK);
|
|
}
|
|
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
|
|
/* Turn off MICBIAS if it was on for an external cap */
|
|
if (control->pdata.jd_ext_cap && !present)
|
|
snd_soc_dapm_disable_pin(dapm, "MICBIAS2");
|
|
|
|
if (present)
|
|
snd_soc_jack_report(wm8994->micdet[0].jack,
|
|
SND_JACK_MECHANICAL, SND_JACK_MECHANICAL);
|
|
else
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, 0,
|
|
SND_JACK_MECHANICAL | SND_JACK_HEADSET |
|
|
wm8994->btn_mask);
|
|
|
|
/* Since we only report deltas force an update, ensures we
|
|
* avoid bootstrapping issues with the core. */
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, 0, 0);
|
|
|
|
pm_runtime_put(component->dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void wm1811_jackdet_bootstrap(struct work_struct *work)
|
|
{
|
|
struct wm8994_priv *wm8994 = container_of(work,
|
|
struct wm8994_priv,
|
|
jackdet_bootstrap.work);
|
|
wm1811_jackdet_irq(0, wm8994);
|
|
}
|
|
|
|
/**
|
|
* wm8958_mic_detect - Enable microphone detection via the WM8958 IRQ
|
|
*
|
|
* @component: WM8958 component
|
|
* @jack: jack to report detection events on
|
|
*
|
|
* Enable microphone detection functionality for the WM8958. By
|
|
* default simple detection which supports the detection of up to 6
|
|
* buttons plus video and microphone functionality is supported.
|
|
*
|
|
* The WM8958 has an advanced jack detection facility which is able to
|
|
* support complex accessory detection, especially when used in
|
|
* conjunction with external circuitry. In order to provide maximum
|
|
* flexiblity a callback is provided which allows a completely custom
|
|
* detection algorithm.
|
|
*/
|
|
int wm8958_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
|
|
wm1811_micdet_cb det_cb, void *det_cb_data,
|
|
wm1811_mic_id_cb id_cb, void *id_cb_data)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
u16 micd_lvl_sel;
|
|
|
|
switch (control->type) {
|
|
case WM1811:
|
|
case WM8958:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (jack) {
|
|
snd_soc_dapm_force_enable_pin(dapm, "CLK_SYS");
|
|
snd_soc_dapm_sync(dapm);
|
|
|
|
wm8994->micdet[0].jack = jack;
|
|
|
|
if (det_cb) {
|
|
wm8994->micd_cb = det_cb;
|
|
wm8994->micd_cb_data = det_cb_data;
|
|
} else {
|
|
wm8994->mic_detecting = true;
|
|
wm8994->jack_mic = false;
|
|
}
|
|
|
|
if (id_cb) {
|
|
wm8994->mic_id_cb = id_cb;
|
|
wm8994->mic_id_cb_data = id_cb_data;
|
|
} else {
|
|
wm8994->mic_id_cb = wm8958_mic_id;
|
|
wm8994->mic_id_cb_data = component;
|
|
}
|
|
|
|
wm8958_micd_set_rate(component);
|
|
|
|
/* Detect microphones and short circuits by default */
|
|
if (control->pdata.micd_lvl_sel)
|
|
micd_lvl_sel = control->pdata.micd_lvl_sel;
|
|
else
|
|
micd_lvl_sel = 0x41;
|
|
|
|
wm8994->btn_mask = SND_JACK_BTN_0 | SND_JACK_BTN_1 |
|
|
SND_JACK_BTN_2 | SND_JACK_BTN_3 |
|
|
SND_JACK_BTN_4 | SND_JACK_BTN_5;
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_2,
|
|
WM8958_MICD_LVL_SEL_MASK, micd_lvl_sel);
|
|
|
|
WARN_ON(snd_soc_component_get_bias_level(component) > SND_SOC_BIAS_STANDBY);
|
|
|
|
/*
|
|
* If we can use jack detection start off with that,
|
|
* otherwise jump straight to microphone detection.
|
|
*/
|
|
if (wm8994->jackdet) {
|
|
/* Disable debounce for the initial detect */
|
|
snd_soc_component_update_bits(component, WM1811_JACKDET_CTRL,
|
|
WM1811_JACKDET_DB, 0);
|
|
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
|
|
WM8958_MICB2_DISCH,
|
|
WM8958_MICB2_DISCH);
|
|
snd_soc_component_update_bits(component, WM8994_LDO_1,
|
|
WM8994_LDO1_DISCH, 0);
|
|
wm1811_jackdet_set_mode(component,
|
|
WM1811_JACKDET_MODE_JACK);
|
|
} else {
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_1,
|
|
WM8958_MICD_ENA, WM8958_MICD_ENA);
|
|
}
|
|
|
|
} else {
|
|
snd_soc_component_update_bits(component, WM8958_MIC_DETECT_1,
|
|
WM8958_MICD_ENA, 0);
|
|
wm1811_jackdet_set_mode(component, WM1811_JACKDET_MODE_NONE);
|
|
snd_soc_dapm_disable_pin(dapm, "CLK_SYS");
|
|
snd_soc_dapm_sync(dapm);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wm8958_mic_detect);
|
|
|
|
static void wm8958_mic_work(struct work_struct *work)
|
|
{
|
|
struct wm8994_priv *wm8994 = container_of(work,
|
|
struct wm8994_priv,
|
|
mic_complete_work.work);
|
|
struct snd_soc_component *component = wm8994->hubs.component;
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
mutex_lock(&wm8994->accdet_lock);
|
|
|
|
wm8994->mic_id_cb(wm8994->mic_id_cb_data, wm8994->mic_status);
|
|
|
|
mutex_unlock(&wm8994->accdet_lock);
|
|
|
|
pm_runtime_put(component->dev);
|
|
}
|
|
|
|
static irqreturn_t wm8958_mic_irq(int irq, void *data)
|
|
{
|
|
struct wm8994_priv *wm8994 = data;
|
|
struct snd_soc_component *component = wm8994->hubs.component;
|
|
int reg, count, ret, id_delay;
|
|
|
|
/*
|
|
* Jack detection may have detected a removal simulataneously
|
|
* with an update of the MICDET status; if so it will have
|
|
* stopped detection and we can ignore this interrupt.
|
|
*/
|
|
if (!(snd_soc_component_read32(component, WM8958_MIC_DETECT_1) & WM8958_MICD_ENA))
|
|
return IRQ_HANDLED;
|
|
|
|
cancel_delayed_work_sync(&wm8994->mic_complete_work);
|
|
cancel_delayed_work_sync(&wm8994->open_circuit_work);
|
|
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
/* We may occasionally read a detection without an impedence
|
|
* range being provided - if that happens loop again.
|
|
*/
|
|
count = 10;
|
|
do {
|
|
reg = snd_soc_component_read32(component, WM8958_MIC_DETECT_3);
|
|
if (reg < 0) {
|
|
dev_err(component->dev,
|
|
"Failed to read mic detect status: %d\n",
|
|
reg);
|
|
pm_runtime_put(component->dev);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (!(reg & WM8958_MICD_VALID)) {
|
|
dev_dbg(component->dev, "Mic detect data not valid\n");
|
|
goto out;
|
|
}
|
|
|
|
if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
|
|
break;
|
|
|
|
msleep(1);
|
|
} while (count--);
|
|
|
|
if (count == 0)
|
|
dev_warn(component->dev, "No impedance range reported for jack\n");
|
|
|
|
#ifndef CONFIG_SND_SOC_WM8994_MODULE
|
|
trace_snd_soc_jack_irq(dev_name(component->dev));
|
|
#endif
|
|
|
|
/* Avoid a transient report when the accessory is being removed */
|
|
if (wm8994->jackdet) {
|
|
ret = snd_soc_component_read32(component, WM1811_JACKDET_CTRL);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "Failed to read jack status: %d\n",
|
|
ret);
|
|
} else if (!(ret & WM1811_JACKDET_LVL)) {
|
|
dev_dbg(component->dev, "Ignoring removed jack\n");
|
|
goto out;
|
|
}
|
|
} else if (!(reg & WM8958_MICD_STS)) {
|
|
snd_soc_jack_report(wm8994->micdet[0].jack, 0,
|
|
SND_JACK_MECHANICAL | SND_JACK_HEADSET |
|
|
wm8994->btn_mask);
|
|
wm8994->mic_detecting = true;
|
|
goto out;
|
|
}
|
|
|
|
wm8994->mic_status = reg;
|
|
id_delay = wm8994->wm8994->pdata.mic_id_delay;
|
|
|
|
if (wm8994->mic_detecting)
|
|
queue_delayed_work(system_power_efficient_wq,
|
|
&wm8994->mic_complete_work,
|
|
msecs_to_jiffies(id_delay));
|
|
else
|
|
wm8958_button_det(component, reg);
|
|
|
|
out:
|
|
pm_runtime_put(component->dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wm8994_fifo_error(int irq, void *data)
|
|
{
|
|
struct snd_soc_component *component = data;
|
|
|
|
dev_err(component->dev, "FIFO error\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wm8994_temp_warn(int irq, void *data)
|
|
{
|
|
struct snd_soc_component *component = data;
|
|
|
|
dev_err(component->dev, "Thermal warning\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wm8994_temp_shut(int irq, void *data)
|
|
{
|
|
struct snd_soc_component *component = data;
|
|
|
|
dev_crit(component->dev, "Thermal shutdown\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int wm8994_component_probe(struct snd_soc_component *component)
|
|
{
|
|
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
|
|
struct wm8994 *control = dev_get_drvdata(component->dev->parent);
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
unsigned int reg;
|
|
int ret, i;
|
|
|
|
snd_soc_component_init_regmap(component, control->regmap);
|
|
|
|
wm8994->hubs.component = component;
|
|
|
|
mutex_init(&wm8994->accdet_lock);
|
|
INIT_DELAYED_WORK(&wm8994->jackdet_bootstrap,
|
|
wm1811_jackdet_bootstrap);
|
|
INIT_DELAYED_WORK(&wm8994->open_circuit_work,
|
|
wm8958_open_circuit_work);
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
INIT_DELAYED_WORK(&wm8994->mic_work, wm8994_mic_work);
|
|
break;
|
|
case WM1811:
|
|
INIT_DELAYED_WORK(&wm8994->mic_work, wm1811_mic_work);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
INIT_DELAYED_WORK(&wm8994->mic_complete_work, wm8958_mic_work);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
|
|
init_completion(&wm8994->fll_locked[i]);
|
|
|
|
wm8994->micdet_irq = control->pdata.micdet_irq;
|
|
|
|
/* By default use idle_bias_off, will override for WM8994 */
|
|
dapm->idle_bias_off = 1;
|
|
|
|
/* Set revision-specific configuration */
|
|
switch (control->type) {
|
|
case WM8994:
|
|
/* Single ended line outputs should have VMID on. */
|
|
if (!control->pdata.lineout1_diff ||
|
|
!control->pdata.lineout2_diff)
|
|
dapm->idle_bias_off = 0;
|
|
|
|
switch (control->revision) {
|
|
case 2:
|
|
case 3:
|
|
wm8994->hubs.dcs_codes_l = -5;
|
|
wm8994->hubs.dcs_codes_r = -5;
|
|
wm8994->hubs.hp_startup_mode = 1;
|
|
wm8994->hubs.dcs_readback_mode = 1;
|
|
wm8994->hubs.series_startup = 1;
|
|
break;
|
|
default:
|
|
wm8994->hubs.dcs_readback_mode = 2;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM8958:
|
|
wm8994->hubs.dcs_readback_mode = 1;
|
|
wm8994->hubs.hp_startup_mode = 1;
|
|
|
|
switch (control->revision) {
|
|
case 0:
|
|
break;
|
|
default:
|
|
wm8994->fll_byp = true;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case WM1811:
|
|
wm8994->hubs.dcs_readback_mode = 2;
|
|
wm8994->hubs.no_series_update = 1;
|
|
wm8994->hubs.hp_startup_mode = 1;
|
|
wm8994->hubs.no_cache_dac_hp_direct = true;
|
|
wm8994->fll_byp = true;
|
|
|
|
wm8994->hubs.dcs_codes_l = -9;
|
|
wm8994->hubs.dcs_codes_r = -7;
|
|
|
|
snd_soc_component_update_bits(component, WM8994_ANALOGUE_HP_1,
|
|
WM1811_HPOUT1_ATTN, WM1811_HPOUT1_ATTN);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_FIFOS_ERR,
|
|
wm8994_fifo_error, "FIFO error", component);
|
|
wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_TEMP_WARN,
|
|
wm8994_temp_warn, "Thermal warning", component);
|
|
wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_TEMP_SHUT,
|
|
wm8994_temp_shut, "Thermal shutdown", component);
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
if (wm8994->micdet_irq)
|
|
ret = request_threaded_irq(wm8994->micdet_irq, NULL,
|
|
wm8994_mic_irq,
|
|
IRQF_TRIGGER_RISING |
|
|
IRQF_ONESHOT,
|
|
"Mic1 detect",
|
|
wm8994);
|
|
else
|
|
ret = wm8994_request_irq(wm8994->wm8994,
|
|
WM8994_IRQ_MIC1_DET,
|
|
wm8994_mic_irq, "Mic 1 detect",
|
|
wm8994);
|
|
|
|
if (ret != 0)
|
|
dev_warn(component->dev,
|
|
"Failed to request Mic1 detect IRQ: %d\n",
|
|
ret);
|
|
|
|
|
|
ret = wm8994_request_irq(wm8994->wm8994,
|
|
WM8994_IRQ_MIC1_SHRT,
|
|
wm8994_mic_irq, "Mic 1 short",
|
|
wm8994);
|
|
if (ret != 0)
|
|
dev_warn(component->dev,
|
|
"Failed to request Mic1 short IRQ: %d\n",
|
|
ret);
|
|
|
|
ret = wm8994_request_irq(wm8994->wm8994,
|
|
WM8994_IRQ_MIC2_DET,
|
|
wm8994_mic_irq, "Mic 2 detect",
|
|
wm8994);
|
|
if (ret != 0)
|
|
dev_warn(component->dev,
|
|
"Failed to request Mic2 detect IRQ: %d\n",
|
|
ret);
|
|
|
|
ret = wm8994_request_irq(wm8994->wm8994,
|
|
WM8994_IRQ_MIC2_SHRT,
|
|
wm8994_mic_irq, "Mic 2 short",
|
|
wm8994);
|
|
if (ret != 0)
|
|
dev_warn(component->dev,
|
|
"Failed to request Mic2 short IRQ: %d\n",
|
|
ret);
|
|
break;
|
|
|
|
case WM8958:
|
|
case WM1811:
|
|
if (wm8994->micdet_irq) {
|
|
ret = request_threaded_irq(wm8994->micdet_irq, NULL,
|
|
wm8958_mic_irq,
|
|
IRQF_TRIGGER_RISING |
|
|
IRQF_ONESHOT,
|
|
"Mic detect",
|
|
wm8994);
|
|
if (ret != 0)
|
|
dev_warn(component->dev,
|
|
"Failed to request Mic detect IRQ: %d\n",
|
|
ret);
|
|
} else {
|
|
wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_MIC1_DET,
|
|
wm8958_mic_irq, "Mic detect",
|
|
wm8994);
|
|
}
|
|
}
|
|
|
|
switch (control->type) {
|
|
case WM1811:
|
|
if (control->cust_id > 1 || control->revision > 1) {
|
|
ret = wm8994_request_irq(wm8994->wm8994,
|
|
WM8994_IRQ_GPIO(6),
|
|
wm1811_jackdet_irq, "JACKDET",
|
|
wm8994);
|
|
if (ret == 0)
|
|
wm8994->jackdet = true;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
wm8994->fll_locked_irq = true;
|
|
for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++) {
|
|
ret = wm8994_request_irq(wm8994->wm8994,
|
|
WM8994_IRQ_FLL1_LOCK + i,
|
|
wm8994_fll_locked_irq, "FLL lock",
|
|
&wm8994->fll_locked[i]);
|
|
if (ret != 0)
|
|
wm8994->fll_locked_irq = false;
|
|
}
|
|
|
|
/* Make sure we can read from the GPIOs if they're inputs */
|
|
pm_runtime_get_sync(component->dev);
|
|
|
|
/* Remember if AIFnLRCLK is configured as a GPIO. This should be
|
|
* configured on init - if a system wants to do this dynamically
|
|
* at runtime we can deal with that then.
|
|
*/
|
|
ret = regmap_read(control->regmap, WM8994_GPIO_1, ®);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "Failed to read GPIO1 state: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
if ((reg & WM8994_GPN_FN_MASK) != WM8994_GP_FN_PIN_SPECIFIC) {
|
|
wm8994->lrclk_shared[0] = 1;
|
|
wm8994_dai[0].symmetric_rates = 1;
|
|
} else {
|
|
wm8994->lrclk_shared[0] = 0;
|
|
}
|
|
|
|
ret = regmap_read(control->regmap, WM8994_GPIO_6, ®);
|
|
if (ret < 0) {
|
|
dev_err(component->dev, "Failed to read GPIO6 state: %d\n", ret);
|
|
goto err_irq;
|
|
}
|
|
if ((reg & WM8994_GPN_FN_MASK) != WM8994_GP_FN_PIN_SPECIFIC) {
|
|
wm8994->lrclk_shared[1] = 1;
|
|
wm8994_dai[1].symmetric_rates = 1;
|
|
} else {
|
|
wm8994->lrclk_shared[1] = 0;
|
|
}
|
|
|
|
pm_runtime_put(component->dev);
|
|
|
|
/* Latch volume update bits */
|
|
for (i = 0; i < ARRAY_SIZE(wm8994_vu_bits); i++)
|
|
snd_soc_component_update_bits(component, wm8994_vu_bits[i].reg,
|
|
wm8994_vu_bits[i].mask,
|
|
wm8994_vu_bits[i].mask);
|
|
|
|
/* Set the low bit of the 3D stereo depth so TLV matches */
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_DAC1_FILTERS_2,
|
|
1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT,
|
|
1 << WM8994_AIF1DAC1_3D_GAIN_SHIFT);
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_DAC2_FILTERS_2,
|
|
1 << WM8994_AIF1DAC2_3D_GAIN_SHIFT,
|
|
1 << WM8994_AIF1DAC2_3D_GAIN_SHIFT);
|
|
snd_soc_component_update_bits(component, WM8994_AIF2_DAC_FILTERS_2,
|
|
1 << WM8994_AIF2DAC_3D_GAIN_SHIFT,
|
|
1 << WM8994_AIF2DAC_3D_GAIN_SHIFT);
|
|
|
|
/* Unconditionally enable AIF1 ADC TDM mode on chips which can
|
|
* use this; it only affects behaviour on idle TDM clock
|
|
* cycles. */
|
|
switch (control->type) {
|
|
case WM8994:
|
|
case WM8958:
|
|
snd_soc_component_update_bits(component, WM8994_AIF1_CONTROL_1,
|
|
WM8994_AIF1ADC_TDM, WM8994_AIF1ADC_TDM);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Put MICBIAS into bypass mode by default on newer devices */
|
|
switch (control->type) {
|
|
case WM8958:
|
|
case WM1811:
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS1,
|
|
WM8958_MICB1_MODE, WM8958_MICB1_MODE);
|
|
snd_soc_component_update_bits(component, WM8958_MICBIAS2,
|
|
WM8958_MICB2_MODE, WM8958_MICB2_MODE);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
wm8994->hubs.check_class_w_digital = wm8994_check_class_w_digital;
|
|
wm_hubs_update_class_w(component);
|
|
|
|
wm8994_handle_pdata(wm8994);
|
|
|
|
wm_hubs_add_analogue_controls(component);
|
|
snd_soc_add_component_controls(component, wm8994_snd_controls,
|
|
ARRAY_SIZE(wm8994_snd_controls));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_dapm_widgets,
|
|
ARRAY_SIZE(wm8994_dapm_widgets));
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
snd_soc_dapm_new_controls(dapm, wm8994_specific_dapm_widgets,
|
|
ARRAY_SIZE(wm8994_specific_dapm_widgets));
|
|
if (control->revision < 4) {
|
|
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets,
|
|
ARRAY_SIZE(wm8994_lateclk_revd_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_adc_revd_widgets,
|
|
ARRAY_SIZE(wm8994_adc_revd_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets,
|
|
ARRAY_SIZE(wm8994_dac_revd_widgets));
|
|
} else {
|
|
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
|
|
ARRAY_SIZE(wm8994_lateclk_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_adc_widgets,
|
|
ARRAY_SIZE(wm8994_adc_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
|
|
ARRAY_SIZE(wm8994_dac_widgets));
|
|
}
|
|
break;
|
|
case WM8958:
|
|
snd_soc_add_component_controls(component, wm8958_snd_controls,
|
|
ARRAY_SIZE(wm8958_snd_controls));
|
|
snd_soc_dapm_new_controls(dapm, wm8958_dapm_widgets,
|
|
ARRAY_SIZE(wm8958_dapm_widgets));
|
|
if (control->revision < 1) {
|
|
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_revd_widgets,
|
|
ARRAY_SIZE(wm8994_lateclk_revd_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_adc_revd_widgets,
|
|
ARRAY_SIZE(wm8994_adc_revd_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_dac_revd_widgets,
|
|
ARRAY_SIZE(wm8994_dac_revd_widgets));
|
|
} else {
|
|
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
|
|
ARRAY_SIZE(wm8994_lateclk_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_adc_widgets,
|
|
ARRAY_SIZE(wm8994_adc_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
|
|
ARRAY_SIZE(wm8994_dac_widgets));
|
|
}
|
|
break;
|
|
|
|
case WM1811:
|
|
snd_soc_add_component_controls(component, wm8958_snd_controls,
|
|
ARRAY_SIZE(wm8958_snd_controls));
|
|
snd_soc_dapm_new_controls(dapm, wm8958_dapm_widgets,
|
|
ARRAY_SIZE(wm8958_dapm_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_lateclk_widgets,
|
|
ARRAY_SIZE(wm8994_lateclk_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_adc_widgets,
|
|
ARRAY_SIZE(wm8994_adc_widgets));
|
|
snd_soc_dapm_new_controls(dapm, wm8994_dac_widgets,
|
|
ARRAY_SIZE(wm8994_dac_widgets));
|
|
break;
|
|
}
|
|
|
|
wm_hubs_add_analogue_routes(component, 0, 0);
|
|
ret = wm8994_request_irq(wm8994->wm8994, WM8994_IRQ_DCS_DONE,
|
|
wm_hubs_dcs_done, "DC servo done",
|
|
&wm8994->hubs);
|
|
if (ret == 0)
|
|
wm8994->hubs.dcs_done_irq = true;
|
|
snd_soc_dapm_add_routes(dapm, intercon, ARRAY_SIZE(intercon));
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
snd_soc_dapm_add_routes(dapm, wm8994_intercon,
|
|
ARRAY_SIZE(wm8994_intercon));
|
|
|
|
if (control->revision < 4) {
|
|
snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon,
|
|
ARRAY_SIZE(wm8994_revd_intercon));
|
|
snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon,
|
|
ARRAY_SIZE(wm8994_lateclk_revd_intercon));
|
|
} else {
|
|
snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon,
|
|
ARRAY_SIZE(wm8994_lateclk_intercon));
|
|
}
|
|
break;
|
|
case WM8958:
|
|
if (control->revision < 1) {
|
|
snd_soc_dapm_add_routes(dapm, wm8994_intercon,
|
|
ARRAY_SIZE(wm8994_intercon));
|
|
snd_soc_dapm_add_routes(dapm, wm8994_revd_intercon,
|
|
ARRAY_SIZE(wm8994_revd_intercon));
|
|
snd_soc_dapm_add_routes(dapm, wm8994_lateclk_revd_intercon,
|
|
ARRAY_SIZE(wm8994_lateclk_revd_intercon));
|
|
} else {
|
|
snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon,
|
|
ARRAY_SIZE(wm8994_lateclk_intercon));
|
|
snd_soc_dapm_add_routes(dapm, wm8958_intercon,
|
|
ARRAY_SIZE(wm8958_intercon));
|
|
}
|
|
|
|
wm8958_dsp2_init(component);
|
|
break;
|
|
case WM1811:
|
|
snd_soc_dapm_add_routes(dapm, wm8994_lateclk_intercon,
|
|
ARRAY_SIZE(wm8994_lateclk_intercon));
|
|
snd_soc_dapm_add_routes(dapm, wm8958_intercon,
|
|
ARRAY_SIZE(wm8958_intercon));
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_irq:
|
|
if (wm8994->jackdet)
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_GPIO(6), wm8994);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_MIC2_SHRT, wm8994);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_MIC2_DET, wm8994);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_MIC1_SHRT, wm8994);
|
|
if (wm8994->micdet_irq)
|
|
free_irq(wm8994->micdet_irq, wm8994);
|
|
for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_FLL1_LOCK + i,
|
|
&wm8994->fll_locked[i]);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_DCS_DONE,
|
|
&wm8994->hubs);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_FIFOS_ERR, component);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_TEMP_SHUT, component);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_TEMP_WARN, component);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void wm8994_component_remove(struct snd_soc_component *component)
|
|
{
|
|
struct wm8994_priv *wm8994 = snd_soc_component_get_drvdata(component);
|
|
struct wm8994 *control = wm8994->wm8994;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(wm8994->fll_locked); i++)
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_FLL1_LOCK + i,
|
|
&wm8994->fll_locked[i]);
|
|
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_DCS_DONE,
|
|
&wm8994->hubs);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_FIFOS_ERR, component);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_TEMP_SHUT, component);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_TEMP_WARN, component);
|
|
|
|
if (wm8994->jackdet)
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_GPIO(6), wm8994);
|
|
|
|
switch (control->type) {
|
|
case WM8994:
|
|
if (wm8994->micdet_irq)
|
|
free_irq(wm8994->micdet_irq, wm8994);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_MIC2_DET,
|
|
wm8994);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_MIC1_SHRT,
|
|
wm8994);
|
|
wm8994_free_irq(wm8994->wm8994, WM8994_IRQ_MIC1_DET,
|
|
wm8994);
|
|
break;
|
|
|
|
case WM1811:
|
|
case WM8958:
|
|
if (wm8994->micdet_irq)
|
|
free_irq(wm8994->micdet_irq, wm8994);
|
|
break;
|
|
}
|
|
release_firmware(wm8994->mbc);
|
|
release_firmware(wm8994->mbc_vss);
|
|
release_firmware(wm8994->enh_eq);
|
|
kfree(wm8994->retune_mobile_texts);
|
|
}
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_wm8994 = {
|
|
.probe = wm8994_component_probe,
|
|
.remove = wm8994_component_remove,
|
|
.suspend = wm8994_component_suspend,
|
|
.resume = wm8994_component_resume,
|
|
.set_bias_level = wm8994_set_bias_level,
|
|
.idle_bias_on = 1,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
.non_legacy_dai_naming = 1,
|
|
};
|
|
|
|
static int wm8994_probe(struct platform_device *pdev)
|
|
{
|
|
struct wm8994_priv *wm8994;
|
|
|
|
wm8994 = devm_kzalloc(&pdev->dev, sizeof(struct wm8994_priv),
|
|
GFP_KERNEL);
|
|
if (wm8994 == NULL)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, wm8994);
|
|
|
|
mutex_init(&wm8994->fw_lock);
|
|
|
|
wm8994->wm8994 = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_idle(&pdev->dev);
|
|
|
|
return devm_snd_soc_register_component(&pdev->dev, &soc_component_dev_wm8994,
|
|
wm8994_dai, ARRAY_SIZE(wm8994_dai));
|
|
}
|
|
|
|
static int wm8994_remove(struct platform_device *pdev)
|
|
{
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int wm8994_suspend(struct device *dev)
|
|
{
|
|
struct wm8994_priv *wm8994 = dev_get_drvdata(dev);
|
|
|
|
/* Drop down to power saving mode when system is suspended */
|
|
if (wm8994->jackdet && !wm8994->active_refcount)
|
|
regmap_update_bits(wm8994->wm8994->regmap, WM8994_ANTIPOP_2,
|
|
WM1811_JACKDET_MODE_MASK,
|
|
wm8994->jackdet_mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8994_resume(struct device *dev)
|
|
{
|
|
struct wm8994_priv *wm8994 = dev_get_drvdata(dev);
|
|
|
|
if (wm8994->jackdet && wm8994->jackdet_mode)
|
|
regmap_update_bits(wm8994->wm8994->regmap, WM8994_ANTIPOP_2,
|
|
WM1811_JACKDET_MODE_MASK,
|
|
WM1811_JACKDET_MODE_AUDIO);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops wm8994_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(wm8994_suspend, wm8994_resume)
|
|
};
|
|
|
|
static struct platform_driver wm8994_codec_driver = {
|
|
.driver = {
|
|
.name = "wm8994-codec",
|
|
.pm = &wm8994_pm_ops,
|
|
},
|
|
.probe = wm8994_probe,
|
|
.remove = wm8994_remove,
|
|
};
|
|
|
|
module_platform_driver(wm8994_codec_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8994 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:wm8994-codec");
|