mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 10:05:00 +08:00
3c7c9370fb
The core.s_config op was meant for legacy drivers that needed to work with old pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was incorrectly called from several drivers. Replace those occurences with proper i2c_board_info structs and call v4l2_i2c_new_subdev_board. After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove that function as well. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
662 lines
15 KiB
C
662 lines
15 KiB
C
/*
|
|
* mt9v011 -Micron 1/4-Inch VGA Digital Image Sensor
|
|
*
|
|
* Copyright (c) 2009 Mauro Carvalho Chehab (mchehab@redhat.com)
|
|
* This code is placed under the terms of the GNU General Public License v2
|
|
*/
|
|
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/div64.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-chip-ident.h>
|
|
#include <media/mt9v011.h>
|
|
|
|
MODULE_DESCRIPTION("Micron mt9v011 sensor driver");
|
|
MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int debug;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0-2)");
|
|
|
|
#define R00_MT9V011_CHIP_VERSION 0x00
|
|
#define R01_MT9V011_ROWSTART 0x01
|
|
#define R02_MT9V011_COLSTART 0x02
|
|
#define R03_MT9V011_HEIGHT 0x03
|
|
#define R04_MT9V011_WIDTH 0x04
|
|
#define R05_MT9V011_HBLANK 0x05
|
|
#define R06_MT9V011_VBLANK 0x06
|
|
#define R07_MT9V011_OUT_CTRL 0x07
|
|
#define R09_MT9V011_SHUTTER_WIDTH 0x09
|
|
#define R0A_MT9V011_CLK_SPEED 0x0a
|
|
#define R0B_MT9V011_RESTART 0x0b
|
|
#define R0C_MT9V011_SHUTTER_DELAY 0x0c
|
|
#define R0D_MT9V011_RESET 0x0d
|
|
#define R1E_MT9V011_DIGITAL_ZOOM 0x1e
|
|
#define R20_MT9V011_READ_MODE 0x20
|
|
#define R2B_MT9V011_GREEN_1_GAIN 0x2b
|
|
#define R2C_MT9V011_BLUE_GAIN 0x2c
|
|
#define R2D_MT9V011_RED_GAIN 0x2d
|
|
#define R2E_MT9V011_GREEN_2_GAIN 0x2e
|
|
#define R35_MT9V011_GLOBAL_GAIN 0x35
|
|
#define RF1_MT9V011_CHIP_ENABLE 0xf1
|
|
|
|
#define MT9V011_VERSION 0x8232
|
|
#define MT9V011_REV_B_VERSION 0x8243
|
|
|
|
/* supported controls */
|
|
static struct v4l2_queryctrl mt9v011_qctrl[] = {
|
|
{
|
|
.id = V4L2_CID_GAIN,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Gain",
|
|
.minimum = 0,
|
|
.maximum = (1 << 10) - 1,
|
|
.step = 1,
|
|
.default_value = 0x0020,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_RED_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Red Balance",
|
|
.minimum = -1 << 9,
|
|
.maximum = (1 << 9) - 1,
|
|
.step = 1,
|
|
.default_value = 0,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_BLUE_BALANCE,
|
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
|
.name = "Blue Balance",
|
|
.minimum = -1 << 9,
|
|
.maximum = (1 << 9) - 1,
|
|
.step = 1,
|
|
.default_value = 0,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_HFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Mirror",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
.default_value = 0,
|
|
.flags = 0,
|
|
}, {
|
|
.id = V4L2_CID_VFLIP,
|
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
|
.name = "Vflip",
|
|
.minimum = 0,
|
|
.maximum = 1,
|
|
.step = 1,
|
|
.default_value = 0,
|
|
.flags = 0,
|
|
}, {
|
|
}
|
|
};
|
|
|
|
struct mt9v011 {
|
|
struct v4l2_subdev sd;
|
|
unsigned width, height;
|
|
unsigned xtal;
|
|
unsigned hflip:1;
|
|
unsigned vflip:1;
|
|
|
|
u16 global_gain, red_bal, blue_bal;
|
|
};
|
|
|
|
static inline struct mt9v011 *to_mt9v011(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct mt9v011, sd);
|
|
}
|
|
|
|
static int mt9v011_read(struct v4l2_subdev *sd, unsigned char addr)
|
|
{
|
|
struct i2c_client *c = v4l2_get_subdevdata(sd);
|
|
__be16 buffer;
|
|
int rc, val;
|
|
|
|
rc = i2c_master_send(c, &addr, 1);
|
|
if (rc != 1)
|
|
v4l2_dbg(0, debug, sd,
|
|
"i2c i/o error: rc == %d (should be 1)\n", rc);
|
|
|
|
msleep(10);
|
|
|
|
rc = i2c_master_recv(c, (char *)&buffer, 2);
|
|
if (rc != 2)
|
|
v4l2_dbg(0, debug, sd,
|
|
"i2c i/o error: rc == %d (should be 2)\n", rc);
|
|
|
|
val = be16_to_cpu(buffer);
|
|
|
|
v4l2_dbg(2, debug, sd, "mt9v011: read 0x%02x = 0x%04x\n", addr, val);
|
|
|
|
return val;
|
|
}
|
|
|
|
static void mt9v011_write(struct v4l2_subdev *sd, unsigned char addr,
|
|
u16 value)
|
|
{
|
|
struct i2c_client *c = v4l2_get_subdevdata(sd);
|
|
unsigned char buffer[3];
|
|
int rc;
|
|
|
|
buffer[0] = addr;
|
|
buffer[1] = value >> 8;
|
|
buffer[2] = value & 0xff;
|
|
|
|
v4l2_dbg(2, debug, sd,
|
|
"mt9v011: writing 0x%02x 0x%04x\n", buffer[0], value);
|
|
rc = i2c_master_send(c, buffer, 3);
|
|
if (rc != 3)
|
|
v4l2_dbg(0, debug, sd,
|
|
"i2c i/o error: rc == %d (should be 3)\n", rc);
|
|
}
|
|
|
|
|
|
struct i2c_reg_value {
|
|
unsigned char reg;
|
|
u16 value;
|
|
};
|
|
|
|
/*
|
|
* Values used at the original driver
|
|
* Some values are marked as Reserved at the datasheet
|
|
*/
|
|
static const struct i2c_reg_value mt9v011_init_default[] = {
|
|
{ R0D_MT9V011_RESET, 0x0001 },
|
|
{ R0D_MT9V011_RESET, 0x0000 },
|
|
|
|
{ R0C_MT9V011_SHUTTER_DELAY, 0x0000 },
|
|
{ R09_MT9V011_SHUTTER_WIDTH, 0x1fc },
|
|
|
|
{ R0A_MT9V011_CLK_SPEED, 0x0000 },
|
|
{ R1E_MT9V011_DIGITAL_ZOOM, 0x0000 },
|
|
|
|
{ R07_MT9V011_OUT_CTRL, 0x0002 }, /* chip enable */
|
|
};
|
|
|
|
static void set_balance(struct v4l2_subdev *sd)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
u16 green1_gain, green2_gain, blue_gain, red_gain;
|
|
|
|
green1_gain = core->global_gain;
|
|
green2_gain = core->global_gain;
|
|
|
|
blue_gain = core->global_gain +
|
|
core->global_gain * core->blue_bal / (1 << 9);
|
|
|
|
red_gain = core->global_gain +
|
|
core->global_gain * core->blue_bal / (1 << 9);
|
|
|
|
mt9v011_write(sd, R2B_MT9V011_GREEN_1_GAIN, green1_gain);
|
|
mt9v011_write(sd, R2E_MT9V011_GREEN_2_GAIN, green1_gain);
|
|
mt9v011_write(sd, R2C_MT9V011_BLUE_GAIN, blue_gain);
|
|
mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
|
|
}
|
|
|
|
static void calc_fps(struct v4l2_subdev *sd, u32 *numerator, u32 *denominator)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
unsigned height, width, hblank, vblank, speed;
|
|
unsigned row_time, t_time;
|
|
u64 frames_per_ms;
|
|
unsigned tmp;
|
|
|
|
height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
|
|
width = mt9v011_read(sd, R04_MT9V011_WIDTH);
|
|
hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
|
|
vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
|
|
speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
|
|
|
|
row_time = (width + 113 + hblank) * (speed + 2);
|
|
t_time = row_time * (height + vblank + 1);
|
|
|
|
frames_per_ms = core->xtal * 1000l;
|
|
do_div(frames_per_ms, t_time);
|
|
tmp = frames_per_ms;
|
|
|
|
v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
|
|
tmp / 1000, tmp % 1000, t_time);
|
|
|
|
if (numerator && denominator) {
|
|
*numerator = 1000;
|
|
*denominator = (u32)frames_per_ms;
|
|
}
|
|
}
|
|
|
|
static u16 calc_speed(struct v4l2_subdev *sd, u32 numerator, u32 denominator)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
unsigned height, width, hblank, vblank;
|
|
unsigned row_time, line_time;
|
|
u64 t_time, speed;
|
|
|
|
/* Avoid bogus calculus */
|
|
if (!numerator || !denominator)
|
|
return 0;
|
|
|
|
height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
|
|
width = mt9v011_read(sd, R04_MT9V011_WIDTH);
|
|
hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
|
|
vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
|
|
|
|
row_time = width + 113 + hblank;
|
|
line_time = height + vblank + 1;
|
|
|
|
t_time = core->xtal * ((u64)numerator);
|
|
/* round to the closest value */
|
|
t_time += denominator / 2;
|
|
do_div(t_time, denominator);
|
|
|
|
speed = t_time;
|
|
do_div(speed, row_time * line_time);
|
|
|
|
/* Avoid having a negative value for speed */
|
|
if (speed < 2)
|
|
speed = 0;
|
|
else
|
|
speed -= 2;
|
|
|
|
/* Avoid speed overflow */
|
|
if (speed > 15)
|
|
return 15;
|
|
|
|
return (u16)speed;
|
|
}
|
|
|
|
static void set_res(struct v4l2_subdev *sd)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
unsigned vstart, hstart;
|
|
|
|
/*
|
|
* The mt9v011 doesn't have scaling. So, in order to select the desired
|
|
* resolution, we're cropping at the middle of the sensor.
|
|
* hblank and vblank should be adjusted, in order to warrant that
|
|
* we'll preserve the line timings for 30 fps, no matter what resolution
|
|
* is selected.
|
|
* NOTE: datasheet says that width (and height) should be filled with
|
|
* width-1. However, this doesn't work, since one pixel per line will
|
|
* be missing.
|
|
*/
|
|
|
|
hstart = 14 + (640 - core->width) / 2;
|
|
mt9v011_write(sd, R02_MT9V011_COLSTART, hstart);
|
|
mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
|
|
mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
|
|
|
|
vstart = 8 + (480 - core->height) / 2;
|
|
mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
|
|
mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
|
|
mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
|
|
|
|
calc_fps(sd, NULL, NULL);
|
|
};
|
|
|
|
static void set_read_mode(struct v4l2_subdev *sd)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
unsigned mode = 0x1000;
|
|
|
|
if (core->hflip)
|
|
mode |= 0x4000;
|
|
|
|
if (core->vflip)
|
|
mode |= 0x8000;
|
|
|
|
mt9v011_write(sd, R20_MT9V011_READ_MODE, mode);
|
|
}
|
|
|
|
static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt9v011_init_default); i++)
|
|
mt9v011_write(sd, mt9v011_init_default[i].reg,
|
|
mt9v011_init_default[i].value);
|
|
|
|
set_balance(sd);
|
|
set_res(sd);
|
|
set_read_mode(sd);
|
|
|
|
return 0;
|
|
};
|
|
|
|
static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
|
|
v4l2_dbg(1, debug, sd, "g_ctrl called\n");
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_GAIN:
|
|
ctrl->value = core->global_gain;
|
|
return 0;
|
|
case V4L2_CID_RED_BALANCE:
|
|
ctrl->value = core->red_bal;
|
|
return 0;
|
|
case V4L2_CID_BLUE_BALANCE:
|
|
ctrl->value = core->blue_bal;
|
|
return 0;
|
|
case V4L2_CID_HFLIP:
|
|
ctrl->value = core->hflip ? 1 : 0;
|
|
return 0;
|
|
case V4L2_CID_VFLIP:
|
|
ctrl->value = core->vflip ? 1 : 0;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
|
|
{
|
|
int i;
|
|
|
|
v4l2_dbg(1, debug, sd, "queryctrl called\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
|
|
if (qc->id && qc->id == mt9v011_qctrl[i].id) {
|
|
memcpy(qc, &(mt9v011_qctrl[i]),
|
|
sizeof(*qc));
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
|
|
static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
u8 i, n;
|
|
n = ARRAY_SIZE(mt9v011_qctrl);
|
|
|
|
for (i = 0; i < n; i++) {
|
|
if (ctrl->id != mt9v011_qctrl[i].id)
|
|
continue;
|
|
if (ctrl->value < mt9v011_qctrl[i].minimum ||
|
|
ctrl->value > mt9v011_qctrl[i].maximum)
|
|
return -ERANGE;
|
|
v4l2_dbg(1, debug, sd, "s_ctrl: id=%d, value=%d\n",
|
|
ctrl->id, ctrl->value);
|
|
break;
|
|
}
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_GAIN:
|
|
core->global_gain = ctrl->value;
|
|
break;
|
|
case V4L2_CID_RED_BALANCE:
|
|
core->red_bal = ctrl->value;
|
|
break;
|
|
case V4L2_CID_BLUE_BALANCE:
|
|
core->blue_bal = ctrl->value;
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
core->hflip = ctrl->value;
|
|
set_read_mode(sd);
|
|
return 0;
|
|
case V4L2_CID_VFLIP:
|
|
core->vflip = ctrl->value;
|
|
set_read_mode(sd);
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
set_balance(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
|
|
enum v4l2_mbus_pixelcode *code)
|
|
{
|
|
if (index > 0)
|
|
return -EINVAL;
|
|
|
|
*code = V4L2_MBUS_FMT_SGRBG8_1X8;
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_try_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
if (fmt->code != V4L2_MBUS_FMT_SGRBG8_1X8)
|
|
return -EINVAL;
|
|
|
|
v4l_bound_align_image(&fmt->width, 48, 639, 1,
|
|
&fmt->height, 32, 480, 1, 0);
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
fmt->colorspace = V4L2_COLORSPACE_SRGB;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
|
|
memset(cp, 0, sizeof(struct v4l2_captureparm));
|
|
cp->capability = V4L2_CAP_TIMEPERFRAME;
|
|
calc_fps(sd,
|
|
&cp->timeperframe.numerator,
|
|
&cp->timeperframe.denominator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_s_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
|
|
{
|
|
struct v4l2_captureparm *cp = &parms->parm.capture;
|
|
struct v4l2_fract *tpf = &cp->timeperframe;
|
|
u16 speed;
|
|
|
|
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
|
return -EINVAL;
|
|
if (cp->extendedmode != 0)
|
|
return -EINVAL;
|
|
|
|
speed = calc_speed(sd, tpf->numerator, tpf->denominator);
|
|
|
|
mt9v011_write(sd, R0A_MT9V011_CLK_SPEED, speed);
|
|
v4l2_dbg(1, debug, sd, "Setting speed to %d\n", speed);
|
|
|
|
/* Recalculate and update fps info */
|
|
calc_fps(sd, &tpf->numerator, &tpf->denominator);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
struct mt9v011 *core = to_mt9v011(sd);
|
|
int rc;
|
|
|
|
rc = mt9v011_try_mbus_fmt(sd, fmt);
|
|
if (rc < 0)
|
|
return -EINVAL;
|
|
|
|
core->width = fmt->width;
|
|
core->height = fmt->height;
|
|
|
|
set_res(sd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int mt9v011_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (!v4l2_chip_match_i2c_client(client, ®->match))
|
|
return -EINVAL;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
reg->val = mt9v011_read(sd, reg->reg & 0xff);
|
|
reg->size = 2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_s_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
if (!v4l2_chip_match_i2c_client(client, ®->match))
|
|
return -EINVAL;
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EPERM;
|
|
|
|
mt9v011_write(sd, reg->reg & 0xff, reg->val & 0xffff);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_chip_ident *chip)
|
|
{
|
|
u16 version;
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
|
|
version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
|
|
|
|
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_MT9V011,
|
|
version);
|
|
}
|
|
|
|
static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
|
|
.queryctrl = mt9v011_queryctrl,
|
|
.g_ctrl = mt9v011_g_ctrl,
|
|
.s_ctrl = mt9v011_s_ctrl,
|
|
.reset = mt9v011_reset,
|
|
.g_chip_ident = mt9v011_g_chip_ident,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = mt9v011_g_register,
|
|
.s_register = mt9v011_s_register,
|
|
#endif
|
|
};
|
|
|
|
static const struct v4l2_subdev_video_ops mt9v011_video_ops = {
|
|
.enum_mbus_fmt = mt9v011_enum_mbus_fmt,
|
|
.try_mbus_fmt = mt9v011_try_mbus_fmt,
|
|
.s_mbus_fmt = mt9v011_s_mbus_fmt,
|
|
.g_parm = mt9v011_g_parm,
|
|
.s_parm = mt9v011_s_parm,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops mt9v011_ops = {
|
|
.core = &mt9v011_core_ops,
|
|
.video = &mt9v011_video_ops,
|
|
};
|
|
|
|
|
|
/****************************************************************************
|
|
I2C Client & Driver
|
|
****************************************************************************/
|
|
|
|
static int mt9v011_probe(struct i2c_client *c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
u16 version;
|
|
struct mt9v011 *core;
|
|
struct v4l2_subdev *sd;
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(c->adapter,
|
|
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
|
|
return -EIO;
|
|
|
|
core = kzalloc(sizeof(struct mt9v011), GFP_KERNEL);
|
|
if (!core)
|
|
return -ENOMEM;
|
|
|
|
sd = &core->sd;
|
|
v4l2_i2c_subdev_init(sd, c, &mt9v011_ops);
|
|
|
|
/* Check if the sensor is really a MT9V011 */
|
|
version = mt9v011_read(sd, R00_MT9V011_CHIP_VERSION);
|
|
if ((version != MT9V011_VERSION) &&
|
|
(version != MT9V011_REV_B_VERSION)) {
|
|
v4l2_info(sd, "*** unknown micron chip detected (0x%04x).\n",
|
|
version);
|
|
kfree(core);
|
|
return -EINVAL;
|
|
}
|
|
|
|
core->global_gain = 0x0024;
|
|
core->width = 640;
|
|
core->height = 480;
|
|
core->xtal = 27000000; /* Hz */
|
|
|
|
if (c->dev.platform_data) {
|
|
struct mt9v011_platform_data *pdata = c->dev.platform_data;
|
|
|
|
core->xtal = pdata->xtal;
|
|
v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
|
|
core->xtal / 1000000, (core->xtal / 1000) % 1000);
|
|
}
|
|
|
|
v4l_info(c, "chip found @ 0x%02x (%s - chip version 0x%04x)\n",
|
|
c->addr << 1, c->adapter->name, version);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt9v011_remove(struct i2c_client *c)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(c);
|
|
|
|
v4l2_dbg(1, debug, sd,
|
|
"mt9v011.c: removing mt9v011 adapter on address 0x%x\n",
|
|
c->addr << 1);
|
|
|
|
v4l2_device_unregister_subdev(sd);
|
|
kfree(to_mt9v011(sd));
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static const struct i2c_device_id mt9v011_id[] = {
|
|
{ "mt9v011", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mt9v011_id);
|
|
|
|
static struct i2c_driver mt9v011_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "mt9v011",
|
|
},
|
|
.probe = mt9v011_probe,
|
|
.remove = mt9v011_remove,
|
|
.id_table = mt9v011_id,
|
|
};
|
|
|
|
static __init int init_mt9v011(void)
|
|
{
|
|
return i2c_add_driver(&mt9v011_driver);
|
|
}
|
|
|
|
static __exit void exit_mt9v011(void)
|
|
{
|
|
i2c_del_driver(&mt9v011_driver);
|
|
}
|
|
|
|
module_init(init_mt9v011);
|
|
module_exit(exit_mt9v011);
|