mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2025-01-01 19:34:35 +08:00
57fbcce37b
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
8728 lines
247 KiB
C
8728 lines
247 KiB
C
/*
|
|
* RTL8XXXU mac80211 USB driver
|
|
*
|
|
* Copyright (c) 2014 - 2015 Jes Sorensen <Jes.Sorensen@redhat.com>
|
|
*
|
|
* Portions, notably calibration code:
|
|
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
|
|
*
|
|
* This driver was written as a replacement for the vendor provided
|
|
* rtl8723au driver. As the Realtek 8xxx chips are very similar in
|
|
* their programming interface, I have started adding support for
|
|
* additional 8xxx chips like the 8192cu, 8188cus, etc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/list.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/wireless.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <net/mac80211.h>
|
|
#include "rtl8xxxu.h"
|
|
#include "rtl8xxxu_regs.h"
|
|
|
|
#define DRIVER_NAME "rtl8xxxu"
|
|
|
|
static int rtl8xxxu_debug = RTL8XXXU_DEBUG_EFUSE;
|
|
static bool rtl8xxxu_ht40_2g;
|
|
|
|
MODULE_AUTHOR("Jes Sorensen <Jes.Sorensen@redhat.com>");
|
|
MODULE_DESCRIPTION("RTL8XXXu USB mac80211 Wireless LAN Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8723aufw_A.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8723aufw_B_NoBT.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8192eu_nic.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8723bu_nic.bin");
|
|
MODULE_FIRMWARE("rtlwifi/rtl8723bu_bt.bin");
|
|
|
|
module_param_named(debug, rtl8xxxu_debug, int, 0600);
|
|
MODULE_PARM_DESC(debug, "Set debug mask");
|
|
module_param_named(ht40_2g, rtl8xxxu_ht40_2g, bool, 0600);
|
|
MODULE_PARM_DESC(ht40_2g, "Enable HT40 support on the 2.4GHz band");
|
|
|
|
#define USB_VENDOR_ID_REALTEK 0x0bda
|
|
/* Minimum IEEE80211_MAX_FRAME_LEN */
|
|
#define RTL_RX_BUFFER_SIZE IEEE80211_MAX_FRAME_LEN
|
|
#define RTL8XXXU_RX_URBS 32
|
|
#define RTL8XXXU_RX_URB_PENDING_WATER 8
|
|
#define RTL8XXXU_TX_URBS 64
|
|
#define RTL8XXXU_TX_URB_LOW_WATER 25
|
|
#define RTL8XXXU_TX_URB_HIGH_WATER 32
|
|
|
|
static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_rx_urb *rx_urb);
|
|
|
|
static struct ieee80211_rate rtl8xxxu_rates[] = {
|
|
{ .bitrate = 10, .hw_value = DESC_RATE_1M, .flags = 0 },
|
|
{ .bitrate = 20, .hw_value = DESC_RATE_2M, .flags = 0 },
|
|
{ .bitrate = 55, .hw_value = DESC_RATE_5_5M, .flags = 0 },
|
|
{ .bitrate = 110, .hw_value = DESC_RATE_11M, .flags = 0 },
|
|
{ .bitrate = 60, .hw_value = DESC_RATE_6M, .flags = 0 },
|
|
{ .bitrate = 90, .hw_value = DESC_RATE_9M, .flags = 0 },
|
|
{ .bitrate = 120, .hw_value = DESC_RATE_12M, .flags = 0 },
|
|
{ .bitrate = 180, .hw_value = DESC_RATE_18M, .flags = 0 },
|
|
{ .bitrate = 240, .hw_value = DESC_RATE_24M, .flags = 0 },
|
|
{ .bitrate = 360, .hw_value = DESC_RATE_36M, .flags = 0 },
|
|
{ .bitrate = 480, .hw_value = DESC_RATE_48M, .flags = 0 },
|
|
{ .bitrate = 540, .hw_value = DESC_RATE_54M, .flags = 0 },
|
|
};
|
|
|
|
static struct ieee80211_channel rtl8xxxu_channels_2g[] = {
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2412,
|
|
.hw_value = 1, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2417,
|
|
.hw_value = 2, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2422,
|
|
.hw_value = 3, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2427,
|
|
.hw_value = 4, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2432,
|
|
.hw_value = 5, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2437,
|
|
.hw_value = 6, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2442,
|
|
.hw_value = 7, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2447,
|
|
.hw_value = 8, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2452,
|
|
.hw_value = 9, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2457,
|
|
.hw_value = 10, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2462,
|
|
.hw_value = 11, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2467,
|
|
.hw_value = 12, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2472,
|
|
.hw_value = 13, .max_power = 30 },
|
|
{ .band = NL80211_BAND_2GHZ, .center_freq = 2484,
|
|
.hw_value = 14, .max_power = 30 }
|
|
};
|
|
|
|
static struct ieee80211_supported_band rtl8xxxu_supported_band = {
|
|
.channels = rtl8xxxu_channels_2g,
|
|
.n_channels = ARRAY_SIZE(rtl8xxxu_channels_2g),
|
|
.bitrates = rtl8xxxu_rates,
|
|
.n_bitrates = ARRAY_SIZE(rtl8xxxu_rates),
|
|
};
|
|
|
|
static struct rtl8xxxu_reg8val rtl8723a_mac_init_table[] = {
|
|
{0x420, 0x80}, {0x423, 0x00}, {0x430, 0x00}, {0x431, 0x00},
|
|
{0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
|
|
{0x436, 0x06}, {0x437, 0x07}, {0x438, 0x00}, {0x439, 0x00},
|
|
{0x43a, 0x00}, {0x43b, 0x01}, {0x43c, 0x04}, {0x43d, 0x05},
|
|
{0x43e, 0x06}, {0x43f, 0x07}, {0x440, 0x5d}, {0x441, 0x01},
|
|
{0x442, 0x00}, {0x444, 0x15}, {0x445, 0xf0}, {0x446, 0x0f},
|
|
{0x447, 0x00}, {0x458, 0x41}, {0x459, 0xa8}, {0x45a, 0x72},
|
|
{0x45b, 0xb9}, {0x460, 0x66}, {0x461, 0x66}, {0x462, 0x08},
|
|
{0x463, 0x03}, {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff},
|
|
{0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
|
|
{0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
|
|
{0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
|
|
{0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
|
|
{0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
|
|
{0x515, 0x10}, {0x516, 0x0a}, {0x517, 0x10}, {0x51a, 0x16},
|
|
{0x524, 0x0f}, {0x525, 0x4f}, {0x546, 0x40}, {0x547, 0x00},
|
|
{0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55a, 0x02},
|
|
{0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a},
|
|
{0x652, 0x20}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e},
|
|
{0x63f, 0x0e}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
|
|
{0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
|
|
{0x70a, 0x65}, {0x70b, 0x87}, {0xffff, 0xff},
|
|
};
|
|
|
|
static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = {
|
|
{0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0},
|
|
{0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10},
|
|
{0x430, 0x00}, {0x431, 0x00},
|
|
{0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05},
|
|
{0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05},
|
|
{0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01},
|
|
{0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00},
|
|
{0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f},
|
|
{0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00},
|
|
{0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f},
|
|
{0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66},
|
|
{0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff},
|
|
{0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2},
|
|
{0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3},
|
|
{0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4},
|
|
{0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4},
|
|
{0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a},
|
|
{0x516, 0x0a}, {0x525, 0x4f},
|
|
{0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50},
|
|
{0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a},
|
|
{0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff},
|
|
{0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff},
|
|
{0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e},
|
|
{0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00},
|
|
{0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43},
|
|
{0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43},
|
|
{0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04},
|
|
{0xffff, 0xff},
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8723a_phy_1t_init_table[] = {
|
|
{0x800, 0x80040000}, {0x804, 0x00000003},
|
|
{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
|
|
{0x810, 0x10001331}, {0x814, 0x020c3d10},
|
|
{0x818, 0x02200385}, {0x81c, 0x00000000},
|
|
{0x820, 0x01000100}, {0x824, 0x00390004},
|
|
{0x828, 0x00000000}, {0x82c, 0x00000000},
|
|
{0x830, 0x00000000}, {0x834, 0x00000000},
|
|
{0x838, 0x00000000}, {0x83c, 0x00000000},
|
|
{0x840, 0x00010000}, {0x844, 0x00000000},
|
|
{0x848, 0x00000000}, {0x84c, 0x00000000},
|
|
{0x850, 0x00000000}, {0x854, 0x00000000},
|
|
{0x858, 0x569a569a}, {0x85c, 0x001b25a4},
|
|
{0x860, 0x66f60110}, {0x864, 0x061f0130},
|
|
{0x868, 0x00000000}, {0x86c, 0x32323200},
|
|
{0x870, 0x07000760}, {0x874, 0x22004000},
|
|
{0x878, 0x00000808}, {0x87c, 0x00000000},
|
|
{0x880, 0xc0083070}, {0x884, 0x000004d5},
|
|
{0x888, 0x00000000}, {0x88c, 0xccc000c0},
|
|
{0x890, 0x00000800}, {0x894, 0xfffffffe},
|
|
{0x898, 0x40302010}, {0x89c, 0x00706050},
|
|
{0x900, 0x00000000}, {0x904, 0x00000023},
|
|
{0x908, 0x00000000}, {0x90c, 0x81121111},
|
|
{0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
|
|
{0xa08, 0x8c838300}, {0xa0c, 0x2e68120f},
|
|
{0xa10, 0x9500bb78}, {0xa14, 0x11144028},
|
|
{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
|
|
{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
|
|
{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
|
|
{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
|
|
{0xa78, 0x00000900},
|
|
{0xc00, 0x48071d40}, {0xc04, 0x03a05611},
|
|
{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
|
|
{0xc10, 0x08800000}, {0xc14, 0x40000100},
|
|
{0xc18, 0x08800000}, {0xc1c, 0x40000100},
|
|
{0xc20, 0x00000000}, {0xc24, 0x00000000},
|
|
{0xc28, 0x00000000}, {0xc2c, 0x00000000},
|
|
{0xc30, 0x69e9ac44}, {0xc34, 0x469652af},
|
|
{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
|
|
{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
|
|
{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
|
|
{0xc50, 0x69543420}, {0xc54, 0x43bc0094},
|
|
{0xc58, 0x69543420}, {0xc5c, 0x433c0094},
|
|
{0xc60, 0x00000000}, {0xc64, 0x7112848b},
|
|
{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
|
|
{0xc70, 0x2c7f000d}, {0xc74, 0x018610db},
|
|
{0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
|
|
{0xc80, 0x40000100}, {0xc84, 0x20f60000},
|
|
{0xc88, 0x40000100}, {0xc8c, 0x20200000},
|
|
{0xc90, 0x00121820}, {0xc94, 0x00000000},
|
|
{0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
|
|
{0xca0, 0x00000000}, {0xca4, 0x00000080},
|
|
{0xca8, 0x00000000}, {0xcac, 0x00000000},
|
|
{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
|
|
{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
|
|
{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
|
|
{0xcc8, 0x00000000}, {0xccc, 0x00000000},
|
|
{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
|
|
{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
|
|
{0xce0, 0x00222222}, {0xce4, 0x00000000},
|
|
{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
|
|
{0xd00, 0x00080740}, {0xd04, 0x00020401},
|
|
{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
|
|
{0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
|
|
{0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975},
|
|
{0xd30, 0x00000000}, {0xd34, 0x80608000},
|
|
{0xd38, 0x00000000}, {0xd3c, 0x00027293},
|
|
{0xd40, 0x00000000}, {0xd44, 0x00000000},
|
|
{0xd48, 0x00000000}, {0xd4c, 0x00000000},
|
|
{0xd50, 0x6437140a}, {0xd54, 0x00000000},
|
|
{0xd58, 0x00000000}, {0xd5c, 0x30032064},
|
|
{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
|
|
{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
|
|
{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
|
|
{0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a},
|
|
{0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a},
|
|
{0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a},
|
|
{0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a},
|
|
{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
|
|
{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
|
|
{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
|
|
{0xe44, 0x01004800}, {0xe48, 0xfb000000},
|
|
{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
|
|
{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
|
|
{0xe5c, 0x28160d05}, {0xe60, 0x00000008},
|
|
{0xe68, 0x001b25a4}, {0xe6c, 0x631b25a0},
|
|
{0xe70, 0x631b25a0}, {0xe74, 0x081b25a0},
|
|
{0xe78, 0x081b25a0}, {0xe7c, 0x081b25a0},
|
|
{0xe80, 0x081b25a0}, {0xe84, 0x631b25a0},
|
|
{0xe88, 0x081b25a0}, {0xe8c, 0x631b25a0},
|
|
{0xed0, 0x631b25a0}, {0xed4, 0x631b25a0},
|
|
{0xed8, 0x631b25a0}, {0xedc, 0x001b25a0},
|
|
{0xee0, 0x001b25a0}, {0xeec, 0x6b1b25a0},
|
|
{0xf14, 0x00000003}, {0xf4c, 0x00000000},
|
|
{0xf00, 0x00000300},
|
|
{0xffff, 0xffffffff},
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = {
|
|
{0x800, 0x80040000}, {0x804, 0x00000003},
|
|
{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
|
|
{0x810, 0x10001331}, {0x814, 0x020c3d10},
|
|
{0x818, 0x02200385}, {0x81c, 0x00000000},
|
|
{0x820, 0x01000100}, {0x824, 0x00190204},
|
|
{0x828, 0x00000000}, {0x82c, 0x00000000},
|
|
{0x830, 0x00000000}, {0x834, 0x00000000},
|
|
{0x838, 0x00000000}, {0x83c, 0x00000000},
|
|
{0x840, 0x00010000}, {0x844, 0x00000000},
|
|
{0x848, 0x00000000}, {0x84c, 0x00000000},
|
|
{0x850, 0x00000000}, {0x854, 0x00000000},
|
|
{0x858, 0x569a11a9}, {0x85c, 0x01000014},
|
|
{0x860, 0x66f60110}, {0x864, 0x061f0649},
|
|
{0x868, 0x00000000}, {0x86c, 0x27272700},
|
|
{0x870, 0x07000760}, {0x874, 0x25004000},
|
|
{0x878, 0x00000808}, {0x87c, 0x00000000},
|
|
{0x880, 0xb0000c1c}, {0x884, 0x00000001},
|
|
{0x888, 0x00000000}, {0x88c, 0xccc000c0},
|
|
{0x890, 0x00000800}, {0x894, 0xfffffffe},
|
|
{0x898, 0x40302010}, {0x89c, 0x00706050},
|
|
{0x900, 0x00000000}, {0x904, 0x00000023},
|
|
{0x908, 0x00000000}, {0x90c, 0x81121111},
|
|
{0x910, 0x00000002}, {0x914, 0x00000201},
|
|
{0xa00, 0x00d047c8}, {0xa04, 0x80ff800c},
|
|
{0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f},
|
|
{0xa10, 0x9500bb78}, {0xa14, 0x1114d028},
|
|
{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
|
|
{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
|
|
{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
|
|
{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
|
|
{0xa78, 0x00000900}, {0xa7c, 0x225b0606},
|
|
{0xa80, 0x21806490}, {0xb2c, 0x00000000},
|
|
{0xc00, 0x48071d40}, {0xc04, 0x03a05611},
|
|
{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
|
|
{0xc10, 0x08800000}, {0xc14, 0x40000100},
|
|
{0xc18, 0x08800000}, {0xc1c, 0x40000100},
|
|
{0xc20, 0x00000000}, {0xc24, 0x00000000},
|
|
{0xc28, 0x00000000}, {0xc2c, 0x00000000},
|
|
{0xc30, 0x69e9ac44}, {0xc34, 0x469652af},
|
|
{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
|
|
{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
|
|
{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
|
|
{0xc50, 0x69553420}, {0xc54, 0x43bc0094},
|
|
{0xc58, 0x00013149}, {0xc5c, 0x00250492},
|
|
{0xc60, 0x00000000}, {0xc64, 0x7112848b},
|
|
{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
|
|
{0xc70, 0x2c7f000d}, {0xc74, 0x020610db},
|
|
{0xc78, 0x0000001f}, {0xc7c, 0x00b91612},
|
|
{0xc80, 0x390000e4}, {0xc84, 0x20f60000},
|
|
{0xc88, 0x40000100}, {0xc8c, 0x20200000},
|
|
{0xc90, 0x00020e1a}, {0xc94, 0x00000000},
|
|
{0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f},
|
|
{0xca0, 0x00000000}, {0xca4, 0x000300a0},
|
|
{0xca8, 0x00000000}, {0xcac, 0x00000000},
|
|
{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
|
|
{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
|
|
{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
|
|
{0xcc8, 0x00000000}, {0xccc, 0x00000000},
|
|
{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
|
|
{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
|
|
{0xce0, 0x00222222}, {0xce4, 0x00000000},
|
|
{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
|
|
{0xd00, 0x00000740}, {0xd04, 0x40020401},
|
|
{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
|
|
{0xd10, 0xa0633333}, {0xd14, 0x3333bc53},
|
|
{0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975},
|
|
{0xd30, 0x00000000}, {0xd34, 0x80608000},
|
|
{0xd38, 0x00000000}, {0xd3c, 0x00127353},
|
|
{0xd40, 0x00000000}, {0xd44, 0x00000000},
|
|
{0xd48, 0x00000000}, {0xd4c, 0x00000000},
|
|
{0xd50, 0x6437140a}, {0xd54, 0x00000000},
|
|
{0xd58, 0x00000282}, {0xd5c, 0x30032064},
|
|
{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
|
|
{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
|
|
{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
|
|
{0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d},
|
|
{0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d},
|
|
{0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d},
|
|
{0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d},
|
|
{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
|
|
{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
|
|
{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
|
|
{0xe44, 0x01004800}, {0xe48, 0xfb000000},
|
|
{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
|
|
{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
|
|
{0xe5c, 0x28160d05}, {0xe60, 0x00000008},
|
|
{0xe68, 0x001b2556}, {0xe6c, 0x00c00096},
|
|
{0xe70, 0x00c00096}, {0xe74, 0x01000056},
|
|
{0xe78, 0x01000014}, {0xe7c, 0x01000056},
|
|
{0xe80, 0x01000014}, {0xe84, 0x00c00096},
|
|
{0xe88, 0x01000056}, {0xe8c, 0x00c00096},
|
|
{0xed0, 0x00c00096}, {0xed4, 0x00c00096},
|
|
{0xed8, 0x00c00096}, {0xedc, 0x000000d6},
|
|
{0xee0, 0x000000d6}, {0xeec, 0x01c00016},
|
|
{0xf14, 0x00000003}, {0xf4c, 0x00000000},
|
|
{0xf00, 0x00000300},
|
|
{0x820, 0x01000100}, {0x800, 0x83040000},
|
|
{0xffff, 0xffffffff},
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8192cu_phy_2t_init_table[] = {
|
|
{0x024, 0x0011800f}, {0x028, 0x00ffdb83},
|
|
{0x800, 0x80040002}, {0x804, 0x00000003},
|
|
{0x808, 0x0000fc00}, {0x80c, 0x0000000a},
|
|
{0x810, 0x10000330}, {0x814, 0x020c3d10},
|
|
{0x818, 0x02200385}, {0x81c, 0x00000000},
|
|
{0x820, 0x01000100}, {0x824, 0x00390004},
|
|
{0x828, 0x01000100}, {0x82c, 0x00390004},
|
|
{0x830, 0x27272727}, {0x834, 0x27272727},
|
|
{0x838, 0x27272727}, {0x83c, 0x27272727},
|
|
{0x840, 0x00010000}, {0x844, 0x00010000},
|
|
{0x848, 0x27272727}, {0x84c, 0x27272727},
|
|
{0x850, 0x00000000}, {0x854, 0x00000000},
|
|
{0x858, 0x569a569a}, {0x85c, 0x0c1b25a4},
|
|
{0x860, 0x66e60230}, {0x864, 0x061f0130},
|
|
{0x868, 0x27272727}, {0x86c, 0x2b2b2b27},
|
|
{0x870, 0x07000700}, {0x874, 0x22184000},
|
|
{0x878, 0x08080808}, {0x87c, 0x00000000},
|
|
{0x880, 0xc0083070}, {0x884, 0x000004d5},
|
|
{0x888, 0x00000000}, {0x88c, 0xcc0000c0},
|
|
{0x890, 0x00000800}, {0x894, 0xfffffffe},
|
|
{0x898, 0x40302010}, {0x89c, 0x00706050},
|
|
{0x900, 0x00000000}, {0x904, 0x00000023},
|
|
{0x908, 0x00000000}, {0x90c, 0x81121313},
|
|
{0xa00, 0x00d047c8}, {0xa04, 0x80ff000c},
|
|
{0xa08, 0x8c838300}, {0xa0c, 0x2e68120f},
|
|
{0xa10, 0x9500bb78}, {0xa14, 0x11144028},
|
|
{0xa18, 0x00881117}, {0xa1c, 0x89140f00},
|
|
{0xa20, 0x1a1b0000}, {0xa24, 0x090e1317},
|
|
{0xa28, 0x00000204}, {0xa2c, 0x00d30000},
|
|
{0xa70, 0x101fbf00}, {0xa74, 0x00000007},
|
|
{0xc00, 0x48071d40}, {0xc04, 0x03a05633},
|
|
{0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c},
|
|
{0xc10, 0x08800000}, {0xc14, 0x40000100},
|
|
{0xc18, 0x08800000}, {0xc1c, 0x40000100},
|
|
{0xc20, 0x00000000}, {0xc24, 0x00000000},
|
|
{0xc28, 0x00000000}, {0xc2c, 0x00000000},
|
|
{0xc30, 0x69e9ac44}, {0xc34, 0x469652cf},
|
|
{0xc38, 0x49795994}, {0xc3c, 0x0a97971c},
|
|
{0xc40, 0x1f7c403f}, {0xc44, 0x000100b7},
|
|
{0xc48, 0xec020107}, {0xc4c, 0x007f037f},
|
|
{0xc50, 0x69543420}, {0xc54, 0x43bc0094},
|
|
{0xc58, 0x69543420}, {0xc5c, 0x433c0094},
|
|
{0xc60, 0x00000000}, {0xc64, 0x5116848b},
|
|
{0xc68, 0x47c00bff}, {0xc6c, 0x00000036},
|
|
{0xc70, 0x2c7f000d}, {0xc74, 0x2186115b},
|
|
{0xc78, 0x0000001f}, {0xc7c, 0x00b99612},
|
|
{0xc80, 0x40000100}, {0xc84, 0x20f60000},
|
|
{0xc88, 0x40000100}, {0xc8c, 0xa0e40000},
|
|
{0xc90, 0x00121820}, {0xc94, 0x00000000},
|
|
{0xc98, 0x00121820}, {0xc9c, 0x00007f7f},
|
|
{0xca0, 0x00000000}, {0xca4, 0x00000080},
|
|
{0xca8, 0x00000000}, {0xcac, 0x00000000},
|
|
{0xcb0, 0x00000000}, {0xcb4, 0x00000000},
|
|
{0xcb8, 0x00000000}, {0xcbc, 0x28000000},
|
|
{0xcc0, 0x00000000}, {0xcc4, 0x00000000},
|
|
{0xcc8, 0x00000000}, {0xccc, 0x00000000},
|
|
{0xcd0, 0x00000000}, {0xcd4, 0x00000000},
|
|
{0xcd8, 0x64b22427}, {0xcdc, 0x00766932},
|
|
{0xce0, 0x00222222}, {0xce4, 0x00000000},
|
|
{0xce8, 0x37644302}, {0xcec, 0x2f97d40c},
|
|
{0xd00, 0x00080740}, {0xd04, 0x00020403},
|
|
{0xd08, 0x0000907f}, {0xd0c, 0x20010201},
|
|
{0xd10, 0xa0633333}, {0xd14, 0x3333bc43},
|
|
{0xd18, 0x7a8f5b6b}, {0xd2c, 0xcc979975},
|
|
{0xd30, 0x00000000}, {0xd34, 0x80608000},
|
|
{0xd38, 0x00000000}, {0xd3c, 0x00027293},
|
|
{0xd40, 0x00000000}, {0xd44, 0x00000000},
|
|
{0xd48, 0x00000000}, {0xd4c, 0x00000000},
|
|
{0xd50, 0x6437140a}, {0xd54, 0x00000000},
|
|
{0xd58, 0x00000000}, {0xd5c, 0x30032064},
|
|
{0xd60, 0x4653de68}, {0xd64, 0x04518a3c},
|
|
{0xd68, 0x00002101}, {0xd6c, 0x2a201c16},
|
|
{0xd70, 0x1812362e}, {0xd74, 0x322c2220},
|
|
{0xd78, 0x000e3c24}, {0xe00, 0x2a2a2a2a},
|
|
{0xe04, 0x2a2a2a2a}, {0xe08, 0x03902a2a},
|
|
{0xe10, 0x2a2a2a2a}, {0xe14, 0x2a2a2a2a},
|
|
{0xe18, 0x2a2a2a2a}, {0xe1c, 0x2a2a2a2a},
|
|
{0xe28, 0x00000000}, {0xe30, 0x1000dc1f},
|
|
{0xe34, 0x10008c1f}, {0xe38, 0x02140102},
|
|
{0xe3c, 0x681604c2}, {0xe40, 0x01007c00},
|
|
{0xe44, 0x01004800}, {0xe48, 0xfb000000},
|
|
{0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f},
|
|
{0xe54, 0x10008c1f}, {0xe58, 0x02140102},
|
|
{0xe5c, 0x28160d05}, {0xe60, 0x00000010},
|
|
{0xe68, 0x001b25a4}, {0xe6c, 0x63db25a4},
|
|
{0xe70, 0x63db25a4}, {0xe74, 0x0c1b25a4},
|
|
{0xe78, 0x0c1b25a4}, {0xe7c, 0x0c1b25a4},
|
|
{0xe80, 0x0c1b25a4}, {0xe84, 0x63db25a4},
|
|
{0xe88, 0x0c1b25a4}, {0xe8c, 0x63db25a4},
|
|
{0xed0, 0x63db25a4}, {0xed4, 0x63db25a4},
|
|
{0xed8, 0x63db25a4}, {0xedc, 0x001b25a4},
|
|
{0xee0, 0x001b25a4}, {0xeec, 0x6fdb25a4},
|
|
{0xf14, 0x00000003}, {0xf4c, 0x00000000},
|
|
{0xf00, 0x00000300},
|
|
{0xffff, 0xffffffff},
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8188ru_phy_1t_highpa_table[] = {
|
|
{0x024, 0x0011800f}, {0x028, 0x00ffdb83},
|
|
{0x040, 0x000c0004}, {0x800, 0x80040000},
|
|
{0x804, 0x00000001}, {0x808, 0x0000fc00},
|
|
{0x80c, 0x0000000a}, {0x810, 0x10005388},
|
|
{0x814, 0x020c3d10}, {0x818, 0x02200385},
|
|
{0x81c, 0x00000000}, {0x820, 0x01000100},
|
|
{0x824, 0x00390204}, {0x828, 0x00000000},
|
|
{0x82c, 0x00000000}, {0x830, 0x00000000},
|
|
{0x834, 0x00000000}, {0x838, 0x00000000},
|
|
{0x83c, 0x00000000}, {0x840, 0x00010000},
|
|
{0x844, 0x00000000}, {0x848, 0x00000000},
|
|
{0x84c, 0x00000000}, {0x850, 0x00000000},
|
|
{0x854, 0x00000000}, {0x858, 0x569a569a},
|
|
{0x85c, 0x001b25a4}, {0x860, 0x66e60230},
|
|
{0x864, 0x061f0130}, {0x868, 0x00000000},
|
|
{0x86c, 0x20202000}, {0x870, 0x03000300},
|
|
{0x874, 0x22004000}, {0x878, 0x00000808},
|
|
{0x87c, 0x00ffc3f1}, {0x880, 0xc0083070},
|
|
{0x884, 0x000004d5}, {0x888, 0x00000000},
|
|
{0x88c, 0xccc000c0}, {0x890, 0x00000800},
|
|
{0x894, 0xfffffffe}, {0x898, 0x40302010},
|
|
{0x89c, 0x00706050}, {0x900, 0x00000000},
|
|
{0x904, 0x00000023}, {0x908, 0x00000000},
|
|
{0x90c, 0x81121111}, {0xa00, 0x00d047c8},
|
|
{0xa04, 0x80ff000c}, {0xa08, 0x8c838300},
|
|
{0xa0c, 0x2e68120f}, {0xa10, 0x9500bb78},
|
|
{0xa14, 0x11144028}, {0xa18, 0x00881117},
|
|
{0xa1c, 0x89140f00}, {0xa20, 0x15160000},
|
|
{0xa24, 0x070b0f12}, {0xa28, 0x00000104},
|
|
{0xa2c, 0x00d30000}, {0xa70, 0x101fbf00},
|
|
{0xa74, 0x00000007}, {0xc00, 0x48071d40},
|
|
{0xc04, 0x03a05611}, {0xc08, 0x000000e4},
|
|
{0xc0c, 0x6c6c6c6c}, {0xc10, 0x08800000},
|
|
{0xc14, 0x40000100}, {0xc18, 0x08800000},
|
|
{0xc1c, 0x40000100}, {0xc20, 0x00000000},
|
|
{0xc24, 0x00000000}, {0xc28, 0x00000000},
|
|
{0xc2c, 0x00000000}, {0xc30, 0x69e9ac44},
|
|
{0xc34, 0x469652cf}, {0xc38, 0x49795994},
|
|
{0xc3c, 0x0a97971c}, {0xc40, 0x1f7c403f},
|
|
{0xc44, 0x000100b7}, {0xc48, 0xec020107},
|
|
{0xc4c, 0x007f037f}, {0xc50, 0x6954342e},
|
|
{0xc54, 0x43bc0094}, {0xc58, 0x6954342f},
|
|
{0xc5c, 0x433c0094}, {0xc60, 0x00000000},
|
|
{0xc64, 0x5116848b}, {0xc68, 0x47c00bff},
|
|
{0xc6c, 0x00000036}, {0xc70, 0x2c46000d},
|
|
{0xc74, 0x018610db}, {0xc78, 0x0000001f},
|
|
{0xc7c, 0x00b91612}, {0xc80, 0x24000090},
|
|
{0xc84, 0x20f60000}, {0xc88, 0x24000090},
|
|
{0xc8c, 0x20200000}, {0xc90, 0x00121820},
|
|
{0xc94, 0x00000000}, {0xc98, 0x00121820},
|
|
{0xc9c, 0x00007f7f}, {0xca0, 0x00000000},
|
|
{0xca4, 0x00000080}, {0xca8, 0x00000000},
|
|
{0xcac, 0x00000000}, {0xcb0, 0x00000000},
|
|
{0xcb4, 0x00000000}, {0xcb8, 0x00000000},
|
|
{0xcbc, 0x28000000}, {0xcc0, 0x00000000},
|
|
{0xcc4, 0x00000000}, {0xcc8, 0x00000000},
|
|
{0xccc, 0x00000000}, {0xcd0, 0x00000000},
|
|
{0xcd4, 0x00000000}, {0xcd8, 0x64b22427},
|
|
{0xcdc, 0x00766932}, {0xce0, 0x00222222},
|
|
{0xce4, 0x00000000}, {0xce8, 0x37644302},
|
|
{0xcec, 0x2f97d40c}, {0xd00, 0x00080740},
|
|
{0xd04, 0x00020401}, {0xd08, 0x0000907f},
|
|
{0xd0c, 0x20010201}, {0xd10, 0xa0633333},
|
|
{0xd14, 0x3333bc43}, {0xd18, 0x7a8f5b6b},
|
|
{0xd2c, 0xcc979975}, {0xd30, 0x00000000},
|
|
{0xd34, 0x80608000}, {0xd38, 0x00000000},
|
|
{0xd3c, 0x00027293}, {0xd40, 0x00000000},
|
|
{0xd44, 0x00000000}, {0xd48, 0x00000000},
|
|
{0xd4c, 0x00000000}, {0xd50, 0x6437140a},
|
|
{0xd54, 0x00000000}, {0xd58, 0x00000000},
|
|
{0xd5c, 0x30032064}, {0xd60, 0x4653de68},
|
|
{0xd64, 0x04518a3c}, {0xd68, 0x00002101},
|
|
{0xd6c, 0x2a201c16}, {0xd70, 0x1812362e},
|
|
{0xd74, 0x322c2220}, {0xd78, 0x000e3c24},
|
|
{0xe00, 0x24242424}, {0xe04, 0x24242424},
|
|
{0xe08, 0x03902024}, {0xe10, 0x24242424},
|
|
{0xe14, 0x24242424}, {0xe18, 0x24242424},
|
|
{0xe1c, 0x24242424}, {0xe28, 0x00000000},
|
|
{0xe30, 0x1000dc1f}, {0xe34, 0x10008c1f},
|
|
{0xe38, 0x02140102}, {0xe3c, 0x681604c2},
|
|
{0xe40, 0x01007c00}, {0xe44, 0x01004800},
|
|
{0xe48, 0xfb000000}, {0xe4c, 0x000028d1},
|
|
{0xe50, 0x1000dc1f}, {0xe54, 0x10008c1f},
|
|
{0xe58, 0x02140102}, {0xe5c, 0x28160d05},
|
|
{0xe60, 0x00000008}, {0xe68, 0x001b25a4},
|
|
{0xe6c, 0x631b25a0}, {0xe70, 0x631b25a0},
|
|
{0xe74, 0x081b25a0}, {0xe78, 0x081b25a0},
|
|
{0xe7c, 0x081b25a0}, {0xe80, 0x081b25a0},
|
|
{0xe84, 0x631b25a0}, {0xe88, 0x081b25a0},
|
|
{0xe8c, 0x631b25a0}, {0xed0, 0x631b25a0},
|
|
{0xed4, 0x631b25a0}, {0xed8, 0x631b25a0},
|
|
{0xedc, 0x001b25a0}, {0xee0, 0x001b25a0},
|
|
{0xeec, 0x6b1b25a0}, {0xee8, 0x31555448},
|
|
{0xf14, 0x00000003}, {0xf4c, 0x00000000},
|
|
{0xf00, 0x00000300},
|
|
{0xffff, 0xffffffff},
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8xxx_agc_standard_table[] = {
|
|
{0xc78, 0x7b000001}, {0xc78, 0x7b010001},
|
|
{0xc78, 0x7b020001}, {0xc78, 0x7b030001},
|
|
{0xc78, 0x7b040001}, {0xc78, 0x7b050001},
|
|
{0xc78, 0x7a060001}, {0xc78, 0x79070001},
|
|
{0xc78, 0x78080001}, {0xc78, 0x77090001},
|
|
{0xc78, 0x760a0001}, {0xc78, 0x750b0001},
|
|
{0xc78, 0x740c0001}, {0xc78, 0x730d0001},
|
|
{0xc78, 0x720e0001}, {0xc78, 0x710f0001},
|
|
{0xc78, 0x70100001}, {0xc78, 0x6f110001},
|
|
{0xc78, 0x6e120001}, {0xc78, 0x6d130001},
|
|
{0xc78, 0x6c140001}, {0xc78, 0x6b150001},
|
|
{0xc78, 0x6a160001}, {0xc78, 0x69170001},
|
|
{0xc78, 0x68180001}, {0xc78, 0x67190001},
|
|
{0xc78, 0x661a0001}, {0xc78, 0x651b0001},
|
|
{0xc78, 0x641c0001}, {0xc78, 0x631d0001},
|
|
{0xc78, 0x621e0001}, {0xc78, 0x611f0001},
|
|
{0xc78, 0x60200001}, {0xc78, 0x49210001},
|
|
{0xc78, 0x48220001}, {0xc78, 0x47230001},
|
|
{0xc78, 0x46240001}, {0xc78, 0x45250001},
|
|
{0xc78, 0x44260001}, {0xc78, 0x43270001},
|
|
{0xc78, 0x42280001}, {0xc78, 0x41290001},
|
|
{0xc78, 0x402a0001}, {0xc78, 0x262b0001},
|
|
{0xc78, 0x252c0001}, {0xc78, 0x242d0001},
|
|
{0xc78, 0x232e0001}, {0xc78, 0x222f0001},
|
|
{0xc78, 0x21300001}, {0xc78, 0x20310001},
|
|
{0xc78, 0x06320001}, {0xc78, 0x05330001},
|
|
{0xc78, 0x04340001}, {0xc78, 0x03350001},
|
|
{0xc78, 0x02360001}, {0xc78, 0x01370001},
|
|
{0xc78, 0x00380001}, {0xc78, 0x00390001},
|
|
{0xc78, 0x003a0001}, {0xc78, 0x003b0001},
|
|
{0xc78, 0x003c0001}, {0xc78, 0x003d0001},
|
|
{0xc78, 0x003e0001}, {0xc78, 0x003f0001},
|
|
{0xc78, 0x7b400001}, {0xc78, 0x7b410001},
|
|
{0xc78, 0x7b420001}, {0xc78, 0x7b430001},
|
|
{0xc78, 0x7b440001}, {0xc78, 0x7b450001},
|
|
{0xc78, 0x7a460001}, {0xc78, 0x79470001},
|
|
{0xc78, 0x78480001}, {0xc78, 0x77490001},
|
|
{0xc78, 0x764a0001}, {0xc78, 0x754b0001},
|
|
{0xc78, 0x744c0001}, {0xc78, 0x734d0001},
|
|
{0xc78, 0x724e0001}, {0xc78, 0x714f0001},
|
|
{0xc78, 0x70500001}, {0xc78, 0x6f510001},
|
|
{0xc78, 0x6e520001}, {0xc78, 0x6d530001},
|
|
{0xc78, 0x6c540001}, {0xc78, 0x6b550001},
|
|
{0xc78, 0x6a560001}, {0xc78, 0x69570001},
|
|
{0xc78, 0x68580001}, {0xc78, 0x67590001},
|
|
{0xc78, 0x665a0001}, {0xc78, 0x655b0001},
|
|
{0xc78, 0x645c0001}, {0xc78, 0x635d0001},
|
|
{0xc78, 0x625e0001}, {0xc78, 0x615f0001},
|
|
{0xc78, 0x60600001}, {0xc78, 0x49610001},
|
|
{0xc78, 0x48620001}, {0xc78, 0x47630001},
|
|
{0xc78, 0x46640001}, {0xc78, 0x45650001},
|
|
{0xc78, 0x44660001}, {0xc78, 0x43670001},
|
|
{0xc78, 0x42680001}, {0xc78, 0x41690001},
|
|
{0xc78, 0x406a0001}, {0xc78, 0x266b0001},
|
|
{0xc78, 0x256c0001}, {0xc78, 0x246d0001},
|
|
{0xc78, 0x236e0001}, {0xc78, 0x226f0001},
|
|
{0xc78, 0x21700001}, {0xc78, 0x20710001},
|
|
{0xc78, 0x06720001}, {0xc78, 0x05730001},
|
|
{0xc78, 0x04740001}, {0xc78, 0x03750001},
|
|
{0xc78, 0x02760001}, {0xc78, 0x01770001},
|
|
{0xc78, 0x00780001}, {0xc78, 0x00790001},
|
|
{0xc78, 0x007a0001}, {0xc78, 0x007b0001},
|
|
{0xc78, 0x007c0001}, {0xc78, 0x007d0001},
|
|
{0xc78, 0x007e0001}, {0xc78, 0x007f0001},
|
|
{0xc78, 0x3800001e}, {0xc78, 0x3801001e},
|
|
{0xc78, 0x3802001e}, {0xc78, 0x3803001e},
|
|
{0xc78, 0x3804001e}, {0xc78, 0x3805001e},
|
|
{0xc78, 0x3806001e}, {0xc78, 0x3807001e},
|
|
{0xc78, 0x3808001e}, {0xc78, 0x3c09001e},
|
|
{0xc78, 0x3e0a001e}, {0xc78, 0x400b001e},
|
|
{0xc78, 0x440c001e}, {0xc78, 0x480d001e},
|
|
{0xc78, 0x4c0e001e}, {0xc78, 0x500f001e},
|
|
{0xc78, 0x5210001e}, {0xc78, 0x5611001e},
|
|
{0xc78, 0x5a12001e}, {0xc78, 0x5e13001e},
|
|
{0xc78, 0x6014001e}, {0xc78, 0x6015001e},
|
|
{0xc78, 0x6016001e}, {0xc78, 0x6217001e},
|
|
{0xc78, 0x6218001e}, {0xc78, 0x6219001e},
|
|
{0xc78, 0x621a001e}, {0xc78, 0x621b001e},
|
|
{0xc78, 0x621c001e}, {0xc78, 0x621d001e},
|
|
{0xc78, 0x621e001e}, {0xc78, 0x621f001e},
|
|
{0xffff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8xxx_agc_highpa_table[] = {
|
|
{0xc78, 0x7b000001}, {0xc78, 0x7b010001},
|
|
{0xc78, 0x7b020001}, {0xc78, 0x7b030001},
|
|
{0xc78, 0x7b040001}, {0xc78, 0x7b050001},
|
|
{0xc78, 0x7b060001}, {0xc78, 0x7b070001},
|
|
{0xc78, 0x7b080001}, {0xc78, 0x7a090001},
|
|
{0xc78, 0x790a0001}, {0xc78, 0x780b0001},
|
|
{0xc78, 0x770c0001}, {0xc78, 0x760d0001},
|
|
{0xc78, 0x750e0001}, {0xc78, 0x740f0001},
|
|
{0xc78, 0x73100001}, {0xc78, 0x72110001},
|
|
{0xc78, 0x71120001}, {0xc78, 0x70130001},
|
|
{0xc78, 0x6f140001}, {0xc78, 0x6e150001},
|
|
{0xc78, 0x6d160001}, {0xc78, 0x6c170001},
|
|
{0xc78, 0x6b180001}, {0xc78, 0x6a190001},
|
|
{0xc78, 0x691a0001}, {0xc78, 0x681b0001},
|
|
{0xc78, 0x671c0001}, {0xc78, 0x661d0001},
|
|
{0xc78, 0x651e0001}, {0xc78, 0x641f0001},
|
|
{0xc78, 0x63200001}, {0xc78, 0x62210001},
|
|
{0xc78, 0x61220001}, {0xc78, 0x60230001},
|
|
{0xc78, 0x46240001}, {0xc78, 0x45250001},
|
|
{0xc78, 0x44260001}, {0xc78, 0x43270001},
|
|
{0xc78, 0x42280001}, {0xc78, 0x41290001},
|
|
{0xc78, 0x402a0001}, {0xc78, 0x262b0001},
|
|
{0xc78, 0x252c0001}, {0xc78, 0x242d0001},
|
|
{0xc78, 0x232e0001}, {0xc78, 0x222f0001},
|
|
{0xc78, 0x21300001}, {0xc78, 0x20310001},
|
|
{0xc78, 0x06320001}, {0xc78, 0x05330001},
|
|
{0xc78, 0x04340001}, {0xc78, 0x03350001},
|
|
{0xc78, 0x02360001}, {0xc78, 0x01370001},
|
|
{0xc78, 0x00380001}, {0xc78, 0x00390001},
|
|
{0xc78, 0x003a0001}, {0xc78, 0x003b0001},
|
|
{0xc78, 0x003c0001}, {0xc78, 0x003d0001},
|
|
{0xc78, 0x003e0001}, {0xc78, 0x003f0001},
|
|
{0xc78, 0x7b400001}, {0xc78, 0x7b410001},
|
|
{0xc78, 0x7b420001}, {0xc78, 0x7b430001},
|
|
{0xc78, 0x7b440001}, {0xc78, 0x7b450001},
|
|
{0xc78, 0x7b460001}, {0xc78, 0x7b470001},
|
|
{0xc78, 0x7b480001}, {0xc78, 0x7a490001},
|
|
{0xc78, 0x794a0001}, {0xc78, 0x784b0001},
|
|
{0xc78, 0x774c0001}, {0xc78, 0x764d0001},
|
|
{0xc78, 0x754e0001}, {0xc78, 0x744f0001},
|
|
{0xc78, 0x73500001}, {0xc78, 0x72510001},
|
|
{0xc78, 0x71520001}, {0xc78, 0x70530001},
|
|
{0xc78, 0x6f540001}, {0xc78, 0x6e550001},
|
|
{0xc78, 0x6d560001}, {0xc78, 0x6c570001},
|
|
{0xc78, 0x6b580001}, {0xc78, 0x6a590001},
|
|
{0xc78, 0x695a0001}, {0xc78, 0x685b0001},
|
|
{0xc78, 0x675c0001}, {0xc78, 0x665d0001},
|
|
{0xc78, 0x655e0001}, {0xc78, 0x645f0001},
|
|
{0xc78, 0x63600001}, {0xc78, 0x62610001},
|
|
{0xc78, 0x61620001}, {0xc78, 0x60630001},
|
|
{0xc78, 0x46640001}, {0xc78, 0x45650001},
|
|
{0xc78, 0x44660001}, {0xc78, 0x43670001},
|
|
{0xc78, 0x42680001}, {0xc78, 0x41690001},
|
|
{0xc78, 0x406a0001}, {0xc78, 0x266b0001},
|
|
{0xc78, 0x256c0001}, {0xc78, 0x246d0001},
|
|
{0xc78, 0x236e0001}, {0xc78, 0x226f0001},
|
|
{0xc78, 0x21700001}, {0xc78, 0x20710001},
|
|
{0xc78, 0x06720001}, {0xc78, 0x05730001},
|
|
{0xc78, 0x04740001}, {0xc78, 0x03750001},
|
|
{0xc78, 0x02760001}, {0xc78, 0x01770001},
|
|
{0xc78, 0x00780001}, {0xc78, 0x00790001},
|
|
{0xc78, 0x007a0001}, {0xc78, 0x007b0001},
|
|
{0xc78, 0x007c0001}, {0xc78, 0x007d0001},
|
|
{0xc78, 0x007e0001}, {0xc78, 0x007f0001},
|
|
{0xc78, 0x3800001e}, {0xc78, 0x3801001e},
|
|
{0xc78, 0x3802001e}, {0xc78, 0x3803001e},
|
|
{0xc78, 0x3804001e}, {0xc78, 0x3805001e},
|
|
{0xc78, 0x3806001e}, {0xc78, 0x3807001e},
|
|
{0xc78, 0x3808001e}, {0xc78, 0x3c09001e},
|
|
{0xc78, 0x3e0a001e}, {0xc78, 0x400b001e},
|
|
{0xc78, 0x440c001e}, {0xc78, 0x480d001e},
|
|
{0xc78, 0x4c0e001e}, {0xc78, 0x500f001e},
|
|
{0xc78, 0x5210001e}, {0xc78, 0x5611001e},
|
|
{0xc78, 0x5a12001e}, {0xc78, 0x5e13001e},
|
|
{0xc78, 0x6014001e}, {0xc78, 0x6015001e},
|
|
{0xc78, 0x6016001e}, {0xc78, 0x6217001e},
|
|
{0xc78, 0x6218001e}, {0xc78, 0x6219001e},
|
|
{0xc78, 0x621a001e}, {0xc78, 0x621b001e},
|
|
{0xc78, 0x621c001e}, {0xc78, 0x621d001e},
|
|
{0xc78, 0x621e001e}, {0xc78, 0x621f001e},
|
|
{0xffff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = {
|
|
{0xc78, 0xfd000001}, {0xc78, 0xfc010001},
|
|
{0xc78, 0xfb020001}, {0xc78, 0xfa030001},
|
|
{0xc78, 0xf9040001}, {0xc78, 0xf8050001},
|
|
{0xc78, 0xf7060001}, {0xc78, 0xf6070001},
|
|
{0xc78, 0xf5080001}, {0xc78, 0xf4090001},
|
|
{0xc78, 0xf30a0001}, {0xc78, 0xf20b0001},
|
|
{0xc78, 0xf10c0001}, {0xc78, 0xf00d0001},
|
|
{0xc78, 0xef0e0001}, {0xc78, 0xee0f0001},
|
|
{0xc78, 0xed100001}, {0xc78, 0xec110001},
|
|
{0xc78, 0xeb120001}, {0xc78, 0xea130001},
|
|
{0xc78, 0xe9140001}, {0xc78, 0xe8150001},
|
|
{0xc78, 0xe7160001}, {0xc78, 0xe6170001},
|
|
{0xc78, 0xe5180001}, {0xc78, 0xe4190001},
|
|
{0xc78, 0xe31a0001}, {0xc78, 0xa51b0001},
|
|
{0xc78, 0xa41c0001}, {0xc78, 0xa31d0001},
|
|
{0xc78, 0x671e0001}, {0xc78, 0x661f0001},
|
|
{0xc78, 0x65200001}, {0xc78, 0x64210001},
|
|
{0xc78, 0x63220001}, {0xc78, 0x4a230001},
|
|
{0xc78, 0x49240001}, {0xc78, 0x48250001},
|
|
{0xc78, 0x47260001}, {0xc78, 0x46270001},
|
|
{0xc78, 0x45280001}, {0xc78, 0x44290001},
|
|
{0xc78, 0x432a0001}, {0xc78, 0x422b0001},
|
|
{0xc78, 0x292c0001}, {0xc78, 0x282d0001},
|
|
{0xc78, 0x272e0001}, {0xc78, 0x262f0001},
|
|
{0xc78, 0x0a300001}, {0xc78, 0x09310001},
|
|
{0xc78, 0x08320001}, {0xc78, 0x07330001},
|
|
{0xc78, 0x06340001}, {0xc78, 0x05350001},
|
|
{0xc78, 0x04360001}, {0xc78, 0x03370001},
|
|
{0xc78, 0x02380001}, {0xc78, 0x01390001},
|
|
{0xc78, 0x013a0001}, {0xc78, 0x013b0001},
|
|
{0xc78, 0x013c0001}, {0xc78, 0x013d0001},
|
|
{0xc78, 0x013e0001}, {0xc78, 0x013f0001},
|
|
{0xc78, 0xfc400001}, {0xc78, 0xfb410001},
|
|
{0xc78, 0xfa420001}, {0xc78, 0xf9430001},
|
|
{0xc78, 0xf8440001}, {0xc78, 0xf7450001},
|
|
{0xc78, 0xf6460001}, {0xc78, 0xf5470001},
|
|
{0xc78, 0xf4480001}, {0xc78, 0xf3490001},
|
|
{0xc78, 0xf24a0001}, {0xc78, 0xf14b0001},
|
|
{0xc78, 0xf04c0001}, {0xc78, 0xef4d0001},
|
|
{0xc78, 0xee4e0001}, {0xc78, 0xed4f0001},
|
|
{0xc78, 0xec500001}, {0xc78, 0xeb510001},
|
|
{0xc78, 0xea520001}, {0xc78, 0xe9530001},
|
|
{0xc78, 0xe8540001}, {0xc78, 0xe7550001},
|
|
{0xc78, 0xe6560001}, {0xc78, 0xe5570001},
|
|
{0xc78, 0xe4580001}, {0xc78, 0xe3590001},
|
|
{0xc78, 0xa65a0001}, {0xc78, 0xa55b0001},
|
|
{0xc78, 0xa45c0001}, {0xc78, 0xa35d0001},
|
|
{0xc78, 0x675e0001}, {0xc78, 0x665f0001},
|
|
{0xc78, 0x65600001}, {0xc78, 0x64610001},
|
|
{0xc78, 0x63620001}, {0xc78, 0x62630001},
|
|
{0xc78, 0x61640001}, {0xc78, 0x48650001},
|
|
{0xc78, 0x47660001}, {0xc78, 0x46670001},
|
|
{0xc78, 0x45680001}, {0xc78, 0x44690001},
|
|
{0xc78, 0x436a0001}, {0xc78, 0x426b0001},
|
|
{0xc78, 0x286c0001}, {0xc78, 0x276d0001},
|
|
{0xc78, 0x266e0001}, {0xc78, 0x256f0001},
|
|
{0xc78, 0x24700001}, {0xc78, 0x09710001},
|
|
{0xc78, 0x08720001}, {0xc78, 0x07730001},
|
|
{0xc78, 0x06740001}, {0xc78, 0x05750001},
|
|
{0xc78, 0x04760001}, {0xc78, 0x03770001},
|
|
{0xc78, 0x02780001}, {0xc78, 0x01790001},
|
|
{0xc78, 0x017a0001}, {0xc78, 0x017b0001},
|
|
{0xc78, 0x017c0001}, {0xc78, 0x017d0001},
|
|
{0xc78, 0x017e0001}, {0xc78, 0x017f0001},
|
|
{0xc50, 0x69553422},
|
|
{0xc50, 0x69553420},
|
|
{0x824, 0x00390204},
|
|
{0xffff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregval rtl8723au_radioa_1t_init_table[] = {
|
|
{0x00, 0x00030159}, {0x01, 0x00031284},
|
|
{0x02, 0x00098000}, {0x03, 0x00039c63},
|
|
{0x04, 0x000210e7}, {0x09, 0x0002044f},
|
|
{0x0a, 0x0001a3f1}, {0x0b, 0x00014787},
|
|
{0x0c, 0x000896fe}, {0x0d, 0x0000e02c},
|
|
{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
|
|
{0x19, 0x00000000}, {0x1a, 0x00030355},
|
|
{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
|
|
{0x1d, 0x000a1250}, {0x1e, 0x0000024f},
|
|
{0x1f, 0x00000000}, {0x20, 0x0000b614},
|
|
{0x21, 0x0006c000}, {0x22, 0x00000000},
|
|
{0x23, 0x00001558}, {0x24, 0x00000060},
|
|
{0x25, 0x00000483}, {0x26, 0x0004f000},
|
|
{0x27, 0x000ec7d9}, {0x28, 0x00057730},
|
|
{0x29, 0x00004783}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00021334}, {0x2a, 0x00000000},
|
|
{0x2b, 0x00000054}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000c}, {0x2a, 0x00000002},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000003},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000004},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000005},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000006},
|
|
{0x2b, 0x00000709}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000007},
|
|
{0x2b, 0x00000709}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000008},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000009},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
|
|
{0x2b, 0x0000050b}, {0x2b, 0x00066666},
|
|
{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
|
|
{0x10, 0x0004000f}, {0x11, 0x000e31fc},
|
|
{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
|
|
{0x10, 0x0002000f}, {0x11, 0x000203f9},
|
|
{0x10, 0x0003000f}, {0x11, 0x000ff500},
|
|
{0x10, 0x00000000}, {0x11, 0x00000000},
|
|
{0x10, 0x0008000f}, {0x11, 0x0003f100},
|
|
{0x10, 0x0009000f}, {0x11, 0x00023100},
|
|
{0x12, 0x00032000}, {0x12, 0x00071000},
|
|
{0x12, 0x000b0000}, {0x12, 0x000fc000},
|
|
{0x13, 0x000287b3}, {0x13, 0x000244b7},
|
|
{0x13, 0x000204ab}, {0x13, 0x0001c49f},
|
|
{0x13, 0x00018493}, {0x13, 0x0001429b},
|
|
{0x13, 0x00010299}, {0x13, 0x0000c29c},
|
|
{0x13, 0x000081a0}, {0x13, 0x000040ac},
|
|
{0x13, 0x00000020}, {0x14, 0x0001944c},
|
|
{0x14, 0x00059444}, {0x14, 0x0009944c},
|
|
{0x14, 0x000d9444}, {0x15, 0x0000f474},
|
|
{0x15, 0x0004f477}, {0x15, 0x0008f455},
|
|
{0x15, 0x000cf455}, {0x16, 0x00000339},
|
|
{0x16, 0x00040339}, {0x16, 0x00080339},
|
|
{0x16, 0x000c0366}, {0x00, 0x00010159},
|
|
{0x18, 0x0000f401}, {0xfe, 0x00000000},
|
|
{0xfe, 0x00000000}, {0x1f, 0x00000003},
|
|
{0xfe, 0x00000000}, {0xfe, 0x00000000},
|
|
{0x1e, 0x00000247}, {0x1f, 0x00000000},
|
|
{0x00, 0x00030159},
|
|
{0xff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = {
|
|
{0x00, 0x00010000}, {0xb0, 0x000dffe0},
|
|
{0xfe, 0x00000000}, {0xfe, 0x00000000},
|
|
{0xfe, 0x00000000}, {0xb1, 0x00000018},
|
|
{0xfe, 0x00000000}, {0xfe, 0x00000000},
|
|
{0xfe, 0x00000000}, {0xb2, 0x00084c00},
|
|
{0xb5, 0x0000d2cc}, {0xb6, 0x000925aa},
|
|
{0xb7, 0x00000010}, {0xb8, 0x0000907f},
|
|
{0x5c, 0x00000002}, {0x7c, 0x00000002},
|
|
{0x7e, 0x00000005}, {0x8b, 0x0006fc00},
|
|
{0xb0, 0x000ff9f0}, {0x1c, 0x000739d2},
|
|
{0x1e, 0x00000000}, {0xdf, 0x00000780},
|
|
{0x50, 0x00067435},
|
|
/*
|
|
* The 8723bu vendor driver indicates that bit 8 should be set in
|
|
* 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However
|
|
* they never actually check the package type - and just default
|
|
* to not setting it.
|
|
*/
|
|
{0x51, 0x0006b04e},
|
|
{0x52, 0x000007d2}, {0x53, 0x00000000},
|
|
{0x54, 0x00050400}, {0x55, 0x0004026e},
|
|
{0xdd, 0x0000004c}, {0x70, 0x00067435},
|
|
/*
|
|
* 0x71 has same package type condition as for register 0x51
|
|
*/
|
|
{0x71, 0x0006b04e},
|
|
{0x72, 0x000007d2}, {0x73, 0x00000000},
|
|
{0x74, 0x00050400}, {0x75, 0x0004026e},
|
|
{0xef, 0x00000100}, {0x34, 0x0000add7},
|
|
{0x35, 0x00005c00}, {0x34, 0x00009dd4},
|
|
{0x35, 0x00005000}, {0x34, 0x00008dd1},
|
|
{0x35, 0x00004400}, {0x34, 0x00007dce},
|
|
{0x35, 0x00003800}, {0x34, 0x00006cd1},
|
|
{0x35, 0x00004400}, {0x34, 0x00005cce},
|
|
{0x35, 0x00003800}, {0x34, 0x000048ce},
|
|
{0x35, 0x00004400}, {0x34, 0x000034ce},
|
|
{0x35, 0x00003800}, {0x34, 0x00002451},
|
|
{0x35, 0x00004400}, {0x34, 0x0000144e},
|
|
{0x35, 0x00003800}, {0x34, 0x00000051},
|
|
{0x35, 0x00004400}, {0xef, 0x00000000},
|
|
{0xef, 0x00000100}, {0xed, 0x00000010},
|
|
{0x44, 0x0000add7}, {0x44, 0x00009dd4},
|
|
{0x44, 0x00008dd1}, {0x44, 0x00007dce},
|
|
{0x44, 0x00006cc1}, {0x44, 0x00005cce},
|
|
{0x44, 0x000044d1}, {0x44, 0x000034ce},
|
|
{0x44, 0x00002451}, {0x44, 0x0000144e},
|
|
{0x44, 0x00000051}, {0xef, 0x00000000},
|
|
{0xed, 0x00000000}, {0x7f, 0x00020080},
|
|
{0xef, 0x00002000}, {0x3b, 0x000380ef},
|
|
{0x3b, 0x000302fe}, {0x3b, 0x00028ce6},
|
|
{0x3b, 0x000200bc}, {0x3b, 0x000188a5},
|
|
{0x3b, 0x00010fbc}, {0x3b, 0x00008f71},
|
|
{0x3b, 0x00000900}, {0xef, 0x00000000},
|
|
{0xed, 0x00000001}, {0x40, 0x000380ef},
|
|
{0x40, 0x000302fe}, {0x40, 0x00028ce6},
|
|
{0x40, 0x000200bc}, {0x40, 0x000188a5},
|
|
{0x40, 0x00010fbc}, {0x40, 0x00008f71},
|
|
{0x40, 0x00000900}, {0xed, 0x00000000},
|
|
{0x82, 0x00080000}, {0x83, 0x00008000},
|
|
{0x84, 0x00048d80}, {0x85, 0x00068000},
|
|
{0xa2, 0x00080000}, {0xa3, 0x00008000},
|
|
{0xa4, 0x00048d80}, {0xa5, 0x00068000},
|
|
{0xed, 0x00000002}, {0xef, 0x00000002},
|
|
{0x56, 0x00000032}, {0x76, 0x00000032},
|
|
{0x01, 0x00000780},
|
|
{0xff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregval rtl8192cu_radioa_2t_init_table[] = {
|
|
{0x00, 0x00030159}, {0x01, 0x00031284},
|
|
{0x02, 0x00098000}, {0x03, 0x00018c63},
|
|
{0x04, 0x000210e7}, {0x09, 0x0002044f},
|
|
{0x0a, 0x0001adb1}, {0x0b, 0x00054867},
|
|
{0x0c, 0x0008992e}, {0x0d, 0x0000e52c},
|
|
{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
|
|
{0x19, 0x00000000}, {0x1a, 0x00010255},
|
|
{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
|
|
{0x1d, 0x000a1250}, {0x1e, 0x0004445f},
|
|
{0x1f, 0x00080001}, {0x20, 0x0000b614},
|
|
{0x21, 0x0006c000}, {0x22, 0x00000000},
|
|
{0x23, 0x00001558}, {0x24, 0x00000060},
|
|
{0x25, 0x00000483}, {0x26, 0x0004f000},
|
|
{0x27, 0x000ec7d9}, {0x28, 0x000577c0},
|
|
{0x29, 0x00004783}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00021334}, {0x2a, 0x00000000},
|
|
{0x2b, 0x00000054}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000c}, {0x2a, 0x00000002},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000003},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000004},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000005},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000006},
|
|
{0x2b, 0x00000709}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000007},
|
|
{0x2b, 0x00000709}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000008},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000009},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
|
|
{0x2b, 0x0000050b}, {0x2b, 0x00066666},
|
|
{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
|
|
{0x10, 0x0004000f}, {0x11, 0x000e31fc},
|
|
{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
|
|
{0x10, 0x0002000f}, {0x11, 0x000203f9},
|
|
{0x10, 0x0003000f}, {0x11, 0x000ff500},
|
|
{0x10, 0x00000000}, {0x11, 0x00000000},
|
|
{0x10, 0x0008000f}, {0x11, 0x0003f100},
|
|
{0x10, 0x0009000f}, {0x11, 0x00023100},
|
|
{0x12, 0x00032000}, {0x12, 0x00071000},
|
|
{0x12, 0x000b0000}, {0x12, 0x000fc000},
|
|
{0x13, 0x000287b3}, {0x13, 0x000244b7},
|
|
{0x13, 0x000204ab}, {0x13, 0x0001c49f},
|
|
{0x13, 0x00018493}, {0x13, 0x0001429b},
|
|
{0x13, 0x00010299}, {0x13, 0x0000c29c},
|
|
{0x13, 0x000081a0}, {0x13, 0x000040ac},
|
|
{0x13, 0x00000020}, {0x14, 0x0001944c},
|
|
{0x14, 0x00059444}, {0x14, 0x0009944c},
|
|
{0x14, 0x000d9444}, {0x15, 0x0000f424},
|
|
{0x15, 0x0004f424}, {0x15, 0x0008f424},
|
|
{0x15, 0x000cf424}, {0x16, 0x000e0330},
|
|
{0x16, 0x000a0330}, {0x16, 0x00060330},
|
|
{0x16, 0x00020330}, {0x00, 0x00010159},
|
|
{0x18, 0x0000f401}, {0xfe, 0x00000000},
|
|
{0xfe, 0x00000000}, {0x1f, 0x00080003},
|
|
{0xfe, 0x00000000}, {0xfe, 0x00000000},
|
|
{0x1e, 0x00044457}, {0x1f, 0x00080000},
|
|
{0x00, 0x00030159},
|
|
{0xff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregval rtl8192cu_radiob_2t_init_table[] = {
|
|
{0x00, 0x00030159}, {0x01, 0x00031284},
|
|
{0x02, 0x00098000}, {0x03, 0x00018c63},
|
|
{0x04, 0x000210e7}, {0x09, 0x0002044f},
|
|
{0x0a, 0x0001adb1}, {0x0b, 0x00054867},
|
|
{0x0c, 0x0008992e}, {0x0d, 0x0000e52c},
|
|
{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
|
|
{0x12, 0x00032000}, {0x12, 0x00071000},
|
|
{0x12, 0x000b0000}, {0x12, 0x000fc000},
|
|
{0x13, 0x000287af}, {0x13, 0x000244b7},
|
|
{0x13, 0x000204ab}, {0x13, 0x0001c49f},
|
|
{0x13, 0x00018493}, {0x13, 0x00014297},
|
|
{0x13, 0x00010295}, {0x13, 0x0000c298},
|
|
{0x13, 0x0000819c}, {0x13, 0x000040a8},
|
|
{0x13, 0x0000001c}, {0x14, 0x0001944c},
|
|
{0x14, 0x00059444}, {0x14, 0x0009944c},
|
|
{0x14, 0x000d9444}, {0x15, 0x0000f424},
|
|
{0x15, 0x0004f424}, {0x15, 0x0008f424},
|
|
{0x15, 0x000cf424}, {0x16, 0x000e0330},
|
|
{0x16, 0x000a0330}, {0x16, 0x00060330},
|
|
{0x16, 0x00020330},
|
|
{0xff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregval rtl8192cu_radioa_1t_init_table[] = {
|
|
{0x00, 0x00030159}, {0x01, 0x00031284},
|
|
{0x02, 0x00098000}, {0x03, 0x00018c63},
|
|
{0x04, 0x000210e7}, {0x09, 0x0002044f},
|
|
{0x0a, 0x0001adb1}, {0x0b, 0x00054867},
|
|
{0x0c, 0x0008992e}, {0x0d, 0x0000e52c},
|
|
{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
|
|
{0x19, 0x00000000}, {0x1a, 0x00010255},
|
|
{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
|
|
{0x1d, 0x000a1250}, {0x1e, 0x0004445f},
|
|
{0x1f, 0x00080001}, {0x20, 0x0000b614},
|
|
{0x21, 0x0006c000}, {0x22, 0x00000000},
|
|
{0x23, 0x00001558}, {0x24, 0x00000060},
|
|
{0x25, 0x00000483}, {0x26, 0x0004f000},
|
|
{0x27, 0x000ec7d9}, {0x28, 0x000577c0},
|
|
{0x29, 0x00004783}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00021334}, {0x2a, 0x00000000},
|
|
{0x2b, 0x00000054}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000c}, {0x2a, 0x00000002},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000003},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000004},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000005},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000006},
|
|
{0x2b, 0x00000709}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000007},
|
|
{0x2b, 0x00000709}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000008},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000009},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
|
|
{0x2b, 0x0000050b}, {0x2b, 0x00066666},
|
|
{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
|
|
{0x10, 0x0004000f}, {0x11, 0x000e31fc},
|
|
{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
|
|
{0x10, 0x0002000f}, {0x11, 0x000203f9},
|
|
{0x10, 0x0003000f}, {0x11, 0x000ff500},
|
|
{0x10, 0x00000000}, {0x11, 0x00000000},
|
|
{0x10, 0x0008000f}, {0x11, 0x0003f100},
|
|
{0x10, 0x0009000f}, {0x11, 0x00023100},
|
|
{0x12, 0x00032000}, {0x12, 0x00071000},
|
|
{0x12, 0x000b0000}, {0x12, 0x000fc000},
|
|
{0x13, 0x000287b3}, {0x13, 0x000244b7},
|
|
{0x13, 0x000204ab}, {0x13, 0x0001c49f},
|
|
{0x13, 0x00018493}, {0x13, 0x0001429b},
|
|
{0x13, 0x00010299}, {0x13, 0x0000c29c},
|
|
{0x13, 0x000081a0}, {0x13, 0x000040ac},
|
|
{0x13, 0x00000020}, {0x14, 0x0001944c},
|
|
{0x14, 0x00059444}, {0x14, 0x0009944c},
|
|
{0x14, 0x000d9444}, {0x15, 0x0000f405},
|
|
{0x15, 0x0004f405}, {0x15, 0x0008f405},
|
|
{0x15, 0x000cf405}, {0x16, 0x000e0330},
|
|
{0x16, 0x000a0330}, {0x16, 0x00060330},
|
|
{0x16, 0x00020330}, {0x00, 0x00010159},
|
|
{0x18, 0x0000f401}, {0xfe, 0x00000000},
|
|
{0xfe, 0x00000000}, {0x1f, 0x00080003},
|
|
{0xfe, 0x00000000}, {0xfe, 0x00000000},
|
|
{0x1e, 0x00044457}, {0x1f, 0x00080000},
|
|
{0x00, 0x00030159},
|
|
{0xff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregval rtl8188ru_radioa_1t_highpa_table[] = {
|
|
{0x00, 0x00030159}, {0x01, 0x00031284},
|
|
{0x02, 0x00098000}, {0x03, 0x00018c63},
|
|
{0x04, 0x000210e7}, {0x09, 0x0002044f},
|
|
{0x0a, 0x0001adb0}, {0x0b, 0x00054867},
|
|
{0x0c, 0x0008992e}, {0x0d, 0x0000e529},
|
|
{0x0e, 0x00039ce7}, {0x0f, 0x00000451},
|
|
{0x19, 0x00000000}, {0x1a, 0x00000255},
|
|
{0x1b, 0x00060a00}, {0x1c, 0x000fc378},
|
|
{0x1d, 0x000a1250}, {0x1e, 0x0004445f},
|
|
{0x1f, 0x00080001}, {0x20, 0x0000b614},
|
|
{0x21, 0x0006c000}, {0x22, 0x0000083c},
|
|
{0x23, 0x00001558}, {0x24, 0x00000060},
|
|
{0x25, 0x00000483}, {0x26, 0x0004f000},
|
|
{0x27, 0x000ec7d9}, {0x28, 0x000977c0},
|
|
{0x29, 0x00004783}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00021334}, {0x2a, 0x00000000},
|
|
{0x2b, 0x00000054}, {0x2a, 0x00000001},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000c}, {0x2a, 0x00000002},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000003},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000004},
|
|
{0x2b, 0x00000808}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000005},
|
|
{0x2b, 0x00000808}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000006},
|
|
{0x2b, 0x00000709}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000007},
|
|
{0x2b, 0x00000709}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000008},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0004b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x00000009},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00053333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000a},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0005b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000b},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00063333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000c},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x0006b333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000d},
|
|
{0x2b, 0x0000060a}, {0x2b, 0x00073333},
|
|
{0x2c, 0x0000000d}, {0x2a, 0x0000000e},
|
|
{0x2b, 0x0000050b}, {0x2b, 0x00066666},
|
|
{0x2c, 0x0000001a}, {0x2a, 0x000e0000},
|
|
{0x10, 0x0004000f}, {0x11, 0x000e31fc},
|
|
{0x10, 0x0006000f}, {0x11, 0x000ff9f8},
|
|
{0x10, 0x0002000f}, {0x11, 0x000203f9},
|
|
{0x10, 0x0003000f}, {0x11, 0x000ff500},
|
|
{0x10, 0x00000000}, {0x11, 0x00000000},
|
|
{0x10, 0x0008000f}, {0x11, 0x0003f100},
|
|
{0x10, 0x0009000f}, {0x11, 0x00023100},
|
|
{0x12, 0x000d8000}, {0x12, 0x00090000},
|
|
{0x12, 0x00051000}, {0x12, 0x00012000},
|
|
{0x13, 0x00028fb4}, {0x13, 0x00024fa8},
|
|
{0x13, 0x000207a4}, {0x13, 0x0001c3b0},
|
|
{0x13, 0x000183a4}, {0x13, 0x00014398},
|
|
{0x13, 0x000101a4}, {0x13, 0x0000c198},
|
|
{0x13, 0x000080a4}, {0x13, 0x00004098},
|
|
{0x13, 0x00000000}, {0x14, 0x0001944c},
|
|
{0x14, 0x00059444}, {0x14, 0x0009944c},
|
|
{0x14, 0x000d9444}, {0x15, 0x0000f405},
|
|
{0x15, 0x0004f405}, {0x15, 0x0008f405},
|
|
{0x15, 0x000cf405}, {0x16, 0x000e0330},
|
|
{0x16, 0x000a0330}, {0x16, 0x00060330},
|
|
{0x16, 0x00020330}, {0x00, 0x00010159},
|
|
{0x18, 0x0000f401}, {0xfe, 0x00000000},
|
|
{0xfe, 0x00000000}, {0x1f, 0x00080003},
|
|
{0xfe, 0x00000000}, {0xfe, 0x00000000},
|
|
{0x1e, 0x00044457}, {0x1f, 0x00080000},
|
|
{0x00, 0x00030159},
|
|
{0xff, 0xffffffff}
|
|
};
|
|
|
|
static struct rtl8xxxu_rfregs rtl8xxxu_rfregs[] = {
|
|
{ /* RF_A */
|
|
.hssiparm1 = REG_FPGA0_XA_HSSI_PARM1,
|
|
.hssiparm2 = REG_FPGA0_XA_HSSI_PARM2,
|
|
.lssiparm = REG_FPGA0_XA_LSSI_PARM,
|
|
.hspiread = REG_HSPI_XA_READBACK,
|
|
.lssiread = REG_FPGA0_XA_LSSI_READBACK,
|
|
.rf_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL,
|
|
},
|
|
{ /* RF_B */
|
|
.hssiparm1 = REG_FPGA0_XB_HSSI_PARM1,
|
|
.hssiparm2 = REG_FPGA0_XB_HSSI_PARM2,
|
|
.lssiparm = REG_FPGA0_XB_LSSI_PARM,
|
|
.hspiread = REG_HSPI_XB_READBACK,
|
|
.lssiread = REG_FPGA0_XB_LSSI_READBACK,
|
|
.rf_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL,
|
|
},
|
|
};
|
|
|
|
static const u32 rtl8723au_iqk_phy_iq_bb_reg[RTL8XXXU_BB_REGS] = {
|
|
REG_OFDM0_XA_RX_IQ_IMBALANCE,
|
|
REG_OFDM0_XB_RX_IQ_IMBALANCE,
|
|
REG_OFDM0_ENERGY_CCA_THRES,
|
|
REG_OFDM0_AGCR_SSI_TABLE,
|
|
REG_OFDM0_XA_TX_IQ_IMBALANCE,
|
|
REG_OFDM0_XB_TX_IQ_IMBALANCE,
|
|
REG_OFDM0_XC_TX_AFE,
|
|
REG_OFDM0_XD_TX_AFE,
|
|
REG_OFDM0_RX_IQ_EXT_ANTA
|
|
};
|
|
|
|
static u8 rtl8xxxu_read8(struct rtl8xxxu_priv *priv, u16 addr)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int len;
|
|
u8 data;
|
|
|
|
mutex_lock(&priv->usb_buf_mutex);
|
|
len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
|
|
addr, 0, &priv->usb_buf.val8, sizeof(u8),
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
data = priv->usb_buf.val8;
|
|
mutex_unlock(&priv->usb_buf_mutex);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
|
|
dev_info(&udev->dev, "%s(%04x) = 0x%02x, len %i\n",
|
|
__func__, addr, data, len);
|
|
return data;
|
|
}
|
|
|
|
static u16 rtl8xxxu_read16(struct rtl8xxxu_priv *priv, u16 addr)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int len;
|
|
u16 data;
|
|
|
|
mutex_lock(&priv->usb_buf_mutex);
|
|
len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
|
|
addr, 0, &priv->usb_buf.val16, sizeof(u16),
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
data = le16_to_cpu(priv->usb_buf.val16);
|
|
mutex_unlock(&priv->usb_buf_mutex);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
|
|
dev_info(&udev->dev, "%s(%04x) = 0x%04x, len %i\n",
|
|
__func__, addr, data, len);
|
|
return data;
|
|
}
|
|
|
|
static u32 rtl8xxxu_read32(struct rtl8xxxu_priv *priv, u16 addr)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int len;
|
|
u32 data;
|
|
|
|
mutex_lock(&priv->usb_buf_mutex);
|
|
len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_READ,
|
|
addr, 0, &priv->usb_buf.val32, sizeof(u32),
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
data = le32_to_cpu(priv->usb_buf.val32);
|
|
mutex_unlock(&priv->usb_buf_mutex);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_READ)
|
|
dev_info(&udev->dev, "%s(%04x) = 0x%08x, len %i\n",
|
|
__func__, addr, data, len);
|
|
return data;
|
|
}
|
|
|
|
static int rtl8xxxu_write8(struct rtl8xxxu_priv *priv, u16 addr, u8 val)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int ret;
|
|
|
|
mutex_lock(&priv->usb_buf_mutex);
|
|
priv->usb_buf.val8 = val;
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
|
|
addr, 0, &priv->usb_buf.val8, sizeof(u8),
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
|
|
mutex_unlock(&priv->usb_buf_mutex);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
|
|
dev_info(&udev->dev, "%s(%04x) = 0x%02x\n",
|
|
__func__, addr, val);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_write16(struct rtl8xxxu_priv *priv, u16 addr, u16 val)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int ret;
|
|
|
|
mutex_lock(&priv->usb_buf_mutex);
|
|
priv->usb_buf.val16 = cpu_to_le16(val);
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
|
|
addr, 0, &priv->usb_buf.val16, sizeof(u16),
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
mutex_unlock(&priv->usb_buf_mutex);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
|
|
dev_info(&udev->dev, "%s(%04x) = 0x%04x\n",
|
|
__func__, addr, val);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_write32(struct rtl8xxxu_priv *priv, u16 addr, u32 val)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int ret;
|
|
|
|
mutex_lock(&priv->usb_buf_mutex);
|
|
priv->usb_buf.val32 = cpu_to_le32(val);
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
|
|
addr, 0, &priv->usb_buf.val32, sizeof(u32),
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
mutex_unlock(&priv->usb_buf_mutex);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_REG_WRITE)
|
|
dev_info(&udev->dev, "%s(%04x) = 0x%08x\n",
|
|
__func__, addr, val);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
rtl8xxxu_writeN(struct rtl8xxxu_priv *priv, u16 addr, u8 *buf, u16 len)
|
|
{
|
|
struct usb_device *udev = priv->udev;
|
|
int blocksize = priv->fops->writeN_block_size;
|
|
int ret, i, count, remainder;
|
|
|
|
count = len / blocksize;
|
|
remainder = len % blocksize;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
|
|
addr, 0, buf, blocksize,
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
if (ret != blocksize)
|
|
goto write_error;
|
|
|
|
addr += blocksize;
|
|
buf += blocksize;
|
|
}
|
|
|
|
if (remainder) {
|
|
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
REALTEK_USB_CMD_REQ, REALTEK_USB_WRITE,
|
|
addr, 0, buf, remainder,
|
|
RTW_USB_CONTROL_MSG_TIMEOUT);
|
|
if (ret != remainder)
|
|
goto write_error;
|
|
}
|
|
|
|
return len;
|
|
|
|
write_error:
|
|
dev_info(&udev->dev,
|
|
"%s: Failed to write block at addr: %04x size: %04x\n",
|
|
__func__, addr, blocksize);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
static u32 rtl8xxxu_read_rfreg(struct rtl8xxxu_priv *priv,
|
|
enum rtl8xxxu_rfpath path, u8 reg)
|
|
{
|
|
u32 hssia, val32, retval;
|
|
|
|
hssia = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM2);
|
|
if (path != RF_A)
|
|
val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm2);
|
|
else
|
|
val32 = hssia;
|
|
|
|
val32 &= ~FPGA0_HSSI_PARM2_ADDR_MASK;
|
|
val32 |= (reg << FPGA0_HSSI_PARM2_ADDR_SHIFT);
|
|
val32 |= FPGA0_HSSI_PARM2_EDGE_READ;
|
|
hssia &= ~FPGA0_HSSI_PARM2_EDGE_READ;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia);
|
|
|
|
udelay(10);
|
|
|
|
rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].hssiparm2, val32);
|
|
udelay(100);
|
|
|
|
hssia |= FPGA0_HSSI_PARM2_EDGE_READ;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM2, hssia);
|
|
udelay(10);
|
|
|
|
val32 = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hssiparm1);
|
|
if (val32 & FPGA0_HSSI_PARM1_PI)
|
|
retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].hspiread);
|
|
else
|
|
retval = rtl8xxxu_read32(priv, rtl8xxxu_rfregs[path].lssiread);
|
|
|
|
retval &= 0xfffff;
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_READ)
|
|
dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",
|
|
__func__, reg, retval);
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* The RTL8723BU driver indicates that registers 0xb2 and 0xb6 can
|
|
* have write issues in high temperature conditions. We may have to
|
|
* retry writing them.
|
|
*/
|
|
static int rtl8xxxu_write_rfreg(struct rtl8xxxu_priv *priv,
|
|
enum rtl8xxxu_rfpath path, u8 reg, u32 data)
|
|
{
|
|
int ret, retval;
|
|
u32 dataaddr;
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_RFREG_WRITE)
|
|
dev_info(&priv->udev->dev, "%s(%02x) = 0x%06x\n",
|
|
__func__, reg, data);
|
|
|
|
data &= FPGA0_LSSI_PARM_DATA_MASK;
|
|
dataaddr = (reg << FPGA0_LSSI_PARM_ADDR_SHIFT) | data;
|
|
|
|
/* Use XB for path B */
|
|
ret = rtl8xxxu_write32(priv, rtl8xxxu_rfregs[path].lssiparm, dataaddr);
|
|
if (ret != sizeof(dataaddr))
|
|
retval = -EIO;
|
|
else
|
|
retval = 0;
|
|
|
|
udelay(1);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int rtl8723a_h2c_cmd(struct rtl8xxxu_priv *priv,
|
|
struct h2c_cmd *h2c, int len)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
int mbox_nr, retry, retval = 0;
|
|
int mbox_reg, mbox_ext_reg;
|
|
u8 val8;
|
|
|
|
mutex_lock(&priv->h2c_mutex);
|
|
|
|
mbox_nr = priv->next_mbox;
|
|
mbox_reg = REG_HMBOX_0 + (mbox_nr * 4);
|
|
mbox_ext_reg = priv->fops->mbox_ext_reg +
|
|
(mbox_nr * priv->fops->mbox_ext_width);
|
|
|
|
/*
|
|
* MBOX ready?
|
|
*/
|
|
retry = 100;
|
|
do {
|
|
val8 = rtl8xxxu_read8(priv, REG_HMTFR);
|
|
if (!(val8 & BIT(mbox_nr)))
|
|
break;
|
|
} while (retry--);
|
|
|
|
if (!retry) {
|
|
dev_info(dev, "%s: Mailbox busy\n", __func__);
|
|
retval = -EBUSY;
|
|
goto error;
|
|
}
|
|
|
|
/*
|
|
* Need to swap as it's being swapped again by rtl8xxxu_write16/32()
|
|
*/
|
|
if (len > sizeof(u32)) {
|
|
if (priv->fops->mbox_ext_width == 4) {
|
|
rtl8xxxu_write32(priv, mbox_ext_reg,
|
|
le32_to_cpu(h2c->raw_wide.ext));
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
|
|
dev_info(dev, "H2C_EXT %08x\n",
|
|
le32_to_cpu(h2c->raw_wide.ext));
|
|
} else {
|
|
rtl8xxxu_write16(priv, mbox_ext_reg,
|
|
le16_to_cpu(h2c->raw.ext));
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
|
|
dev_info(dev, "H2C_EXT %04x\n",
|
|
le16_to_cpu(h2c->raw.ext));
|
|
}
|
|
}
|
|
rtl8xxxu_write32(priv, mbox_reg, le32_to_cpu(h2c->raw.data));
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_H2C)
|
|
dev_info(dev, "H2C %08x\n", le32_to_cpu(h2c->raw.data));
|
|
|
|
priv->next_mbox = (mbox_nr + 1) % H2C_MAX_MBOX;
|
|
|
|
error:
|
|
mutex_unlock(&priv->h2c_mutex);
|
|
return retval;
|
|
}
|
|
|
|
static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
int reqnum = 0;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER;
|
|
h2c.bt_mp_oper.operreq = 0 | (reqnum << 4);
|
|
h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE;
|
|
h2c.bt_mp_oper.data = data;
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
|
|
|
|
reqnum++;
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER;
|
|
h2c.bt_mp_oper.operreq = 0 | (reqnum << 4);
|
|
h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE;
|
|
h2c.bt_mp_oper.addr = reg;
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper));
|
|
}
|
|
|
|
static void rtl8723a_enable_rf(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u32 val32;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
|
|
val8 |= BIT(0) | BIT(3);
|
|
rtl8xxxu_write8(priv, REG_SPS0_CTRL, val8);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM);
|
|
val32 &= ~(BIT(4) | BIT(5));
|
|
val32 |= BIT(3);
|
|
if (priv->rf_paths == 2) {
|
|
val32 &= ~(BIT(20) | BIT(21));
|
|
val32 |= BIT(19);
|
|
}
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
|
|
val32 &= ~OFDM_RF_PATH_TX_MASK;
|
|
if (priv->tx_paths == 2)
|
|
val32 |= OFDM_RF_PATH_TX_A | OFDM_RF_PATH_TX_B;
|
|
else if (priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C)
|
|
val32 |= OFDM_RF_PATH_TX_B;
|
|
else
|
|
val32 |= OFDM_RF_PATH_TX_A;
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 &= ~FPGA_RF_MODE_JAPAN;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
if (priv->rf_paths == 2)
|
|
rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x63db25a0);
|
|
else
|
|
rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x631b25a0);
|
|
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x32d95);
|
|
if (priv->rf_paths == 2)
|
|
rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x32d95);
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
|
|
}
|
|
|
|
static void rtl8723a_disable_rf(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 sps0;
|
|
u32 val32;
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
|
|
|
|
sps0 = rtl8xxxu_read8(priv, REG_SPS0_CTRL);
|
|
|
|
/* RF RX code for preamble power saving */
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_PARM);
|
|
val32 &= ~(BIT(3) | BIT(4) | BIT(5));
|
|
if (priv->rf_paths == 2)
|
|
val32 &= ~(BIT(19) | BIT(20) | BIT(21));
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_PARM, val32);
|
|
|
|
/* Disable TX for four paths */
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
|
|
val32 &= ~OFDM_RF_PATH_TX_MASK;
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
|
|
|
|
/* Enable power saving */
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 |= FPGA_RF_MODE_JAPAN;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
/* AFE control register to power down bits [30:22] */
|
|
if (priv->rf_paths == 2)
|
|
rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x00db25a0);
|
|
else
|
|
rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, 0x001b25a0);
|
|
|
|
/* Power down RF module */
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0);
|
|
if (priv->rf_paths == 2)
|
|
rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0);
|
|
|
|
sps0 &= ~(BIT(0) | BIT(3));
|
|
rtl8xxxu_write8(priv, REG_SPS0_CTRL, sps0);
|
|
}
|
|
|
|
|
|
static void rtl8723a_stop_tx_beacon(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL + 2);
|
|
val8 &= ~BIT(6);
|
|
rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL + 2, val8);
|
|
|
|
rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 1, 0x64);
|
|
val8 = rtl8xxxu_read8(priv, REG_TBTT_PROHIBIT + 2);
|
|
val8 &= ~BIT(0);
|
|
rtl8xxxu_write8(priv, REG_TBTT_PROHIBIT + 2, val8);
|
|
}
|
|
|
|
|
|
/*
|
|
* The rtl8723a has 3 channel groups for it's efuse settings. It only
|
|
* supports the 2.4GHz band, so channels 1 - 14:
|
|
* group 0: channels 1 - 3
|
|
* group 1: channels 4 - 9
|
|
* group 2: channels 10 - 14
|
|
*
|
|
* Note: We index from 0 in the code
|
|
*/
|
|
static int rtl8723a_channel_to_group(int channel)
|
|
{
|
|
int group;
|
|
|
|
if (channel < 4)
|
|
group = 0;
|
|
else if (channel < 10)
|
|
group = 1;
|
|
else
|
|
group = 2;
|
|
|
|
return group;
|
|
}
|
|
|
|
static int rtl8723b_channel_to_group(int channel)
|
|
{
|
|
int group;
|
|
|
|
if (channel < 3)
|
|
group = 0;
|
|
else if (channel < 6)
|
|
group = 1;
|
|
else if (channel < 9)
|
|
group = 2;
|
|
else if (channel < 12)
|
|
group = 3;
|
|
else
|
|
group = 4;
|
|
|
|
return group;
|
|
}
|
|
|
|
static void rtl8723au_config_channel(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
u32 val32, rsr;
|
|
u8 val8, opmode;
|
|
bool ht = true;
|
|
int sec_ch_above, channel;
|
|
int i;
|
|
|
|
opmode = rtl8xxxu_read8(priv, REG_BW_OPMODE);
|
|
rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
|
|
channel = hw->conf.chandef.chan->hw_value;
|
|
|
|
switch (hw->conf.chandef.width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
ht = false;
|
|
case NL80211_CHAN_WIDTH_20:
|
|
opmode |= BW_OPMODE_20MHZ;
|
|
rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 &= ~FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
|
|
val32 &= ~FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2);
|
|
val32 |= FPGA0_ANALOG2_20MHZ;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32);
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
if (hw->conf.chandef.center_freq1 >
|
|
hw->conf.chandef.chan->center_freq) {
|
|
sec_ch_above = 1;
|
|
channel += 2;
|
|
} else {
|
|
sec_ch_above = 0;
|
|
channel -= 2;
|
|
}
|
|
|
|
opmode &= ~BW_OPMODE_20MHZ;
|
|
rtl8xxxu_write8(priv, REG_BW_OPMODE, opmode);
|
|
rsr &= ~RSR_RSC_BANDWIDTH_40M;
|
|
if (sec_ch_above)
|
|
rsr |= RSR_RSC_UPPER_SUB_CHANNEL;
|
|
else
|
|
rsr |= RSR_RSC_LOWER_SUB_CHANNEL;
|
|
rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, rsr);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 |= FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
|
|
val32 |= FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
|
|
|
|
/*
|
|
* Set Control channel to upper or lower. These settings
|
|
* are required only for 40MHz
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
|
|
val32 &= ~CCK0_SIDEBAND;
|
|
if (!sec_ch_above)
|
|
val32 |= CCK0_SIDEBAND;
|
|
rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
|
|
val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
|
|
if (sec_ch_above)
|
|
val32 |= OFDM_LSTF_PRIME_CH_LOW;
|
|
else
|
|
val32 |= OFDM_LSTF_PRIME_CH_HIGH;
|
|
rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_ANALOG2);
|
|
val32 &= ~FPGA0_ANALOG2_20MHZ;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_ANALOG2, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
|
|
val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
|
|
if (sec_ch_above)
|
|
val32 |= FPGA0_PS_UPPER_CHANNEL;
|
|
else
|
|
val32 |= FPGA0_PS_LOWER_CHANNEL;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
for (i = RF_A; i < priv->rf_paths; i++) {
|
|
val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
|
|
val32 &= ~MODE_AG_CHANNEL_MASK;
|
|
val32 |= channel;
|
|
rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
|
|
}
|
|
|
|
if (ht)
|
|
val8 = 0x0e;
|
|
else
|
|
val8 = 0x0a;
|
|
|
|
rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
|
|
rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
|
|
|
|
rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
|
|
rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
|
|
|
|
for (i = RF_A; i < priv->rf_paths; i++) {
|
|
val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
|
|
if (hw->conf.chandef.width == NL80211_CHAN_WIDTH_40)
|
|
val32 &= ~MODE_AG_CHANNEL_20MHZ;
|
|
else
|
|
val32 |= MODE_AG_CHANNEL_20MHZ;
|
|
rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
|
|
}
|
|
}
|
|
|
|
static void rtl8723bu_config_channel(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
u32 val32, rsr;
|
|
u8 val8, subchannel;
|
|
u16 rf_mode_bw;
|
|
bool ht = true;
|
|
int sec_ch_above, channel;
|
|
int i;
|
|
|
|
rf_mode_bw = rtl8xxxu_read16(priv, REG_WMAC_TRXPTCL_CTL);
|
|
rf_mode_bw &= ~WMAC_TRXPTCL_CTL_BW_MASK;
|
|
rsr = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
|
|
channel = hw->conf.chandef.chan->hw_value;
|
|
|
|
/* Hack */
|
|
subchannel = 0;
|
|
|
|
switch (hw->conf.chandef.width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
ht = false;
|
|
case NL80211_CHAN_WIDTH_20:
|
|
rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_20;
|
|
subchannel = 0;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 &= ~FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
|
|
val32 &= ~FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT);
|
|
val32 &= ~(BIT(30) | BIT(31));
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TX_PSDO_NOISE_WEIGHT, val32);
|
|
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_40;
|
|
|
|
if (hw->conf.chandef.center_freq1 >
|
|
hw->conf.chandef.chan->center_freq) {
|
|
sec_ch_above = 1;
|
|
channel += 2;
|
|
} else {
|
|
sec_ch_above = 0;
|
|
channel -= 2;
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 |= FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA1_RF_MODE);
|
|
val32 |= FPGA_RF_MODE;
|
|
rtl8xxxu_write32(priv, REG_FPGA1_RF_MODE, val32);
|
|
|
|
/*
|
|
* Set Control channel to upper or lower. These settings
|
|
* are required only for 40MHz
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_CCK0_SYSTEM);
|
|
val32 &= ~CCK0_SIDEBAND;
|
|
if (!sec_ch_above)
|
|
val32 |= CCK0_SIDEBAND;
|
|
rtl8xxxu_write32(priv, REG_CCK0_SYSTEM, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
|
|
val32 &= ~OFDM_LSTF_PRIME_CH_MASK; /* 0xc00 */
|
|
if (sec_ch_above)
|
|
val32 |= OFDM_LSTF_PRIME_CH_LOW;
|
|
else
|
|
val32 |= OFDM_LSTF_PRIME_CH_HIGH;
|
|
rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_POWER_SAVE);
|
|
val32 &= ~(FPGA0_PS_LOWER_CHANNEL | FPGA0_PS_UPPER_CHANNEL);
|
|
if (sec_ch_above)
|
|
val32 |= FPGA0_PS_UPPER_CHANNEL;
|
|
else
|
|
val32 |= FPGA0_PS_LOWER_CHANNEL;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_POWER_SAVE, val32);
|
|
break;
|
|
case NL80211_CHAN_WIDTH_80:
|
|
rf_mode_bw |= WMAC_TRXPTCL_CTL_BW_80;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
for (i = RF_A; i < priv->rf_paths; i++) {
|
|
val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
|
|
val32 &= ~MODE_AG_CHANNEL_MASK;
|
|
val32 |= channel;
|
|
rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
|
|
}
|
|
|
|
rtl8xxxu_write16(priv, REG_WMAC_TRXPTCL_CTL, rf_mode_bw);
|
|
rtl8xxxu_write8(priv, REG_DATA_SUBCHANNEL, subchannel);
|
|
|
|
if (ht)
|
|
val8 = 0x0e;
|
|
else
|
|
val8 = 0x0a;
|
|
|
|
rtl8xxxu_write8(priv, REG_SIFS_CCK + 1, val8);
|
|
rtl8xxxu_write8(priv, REG_SIFS_OFDM + 1, val8);
|
|
|
|
rtl8xxxu_write16(priv, REG_R2T_SIFS, 0x0808);
|
|
rtl8xxxu_write16(priv, REG_T2T_SIFS, 0x0a0a);
|
|
|
|
for (i = RF_A; i < priv->rf_paths; i++) {
|
|
val32 = rtl8xxxu_read_rfreg(priv, i, RF6052_REG_MODE_AG);
|
|
val32 &= ~MODE_AG_BW_MASK;
|
|
switch(hw->conf.chandef.width) {
|
|
case NL80211_CHAN_WIDTH_80:
|
|
val32 |= MODE_AG_BW_80MHZ_8723B;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
val32 |= MODE_AG_BW_40MHZ_8723B;
|
|
break;
|
|
default:
|
|
val32 |= MODE_AG_BW_20MHZ_8723B;
|
|
break;
|
|
}
|
|
rtl8xxxu_write_rfreg(priv, i, RF6052_REG_MODE_AG, val32);
|
|
}
|
|
}
|
|
|
|
static void
|
|
rtl8723a_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
|
|
{
|
|
u8 cck[RTL8723A_MAX_RF_PATHS], ofdm[RTL8723A_MAX_RF_PATHS];
|
|
u8 ofdmbase[RTL8723A_MAX_RF_PATHS], mcsbase[RTL8723A_MAX_RF_PATHS];
|
|
u32 val32, ofdm_a, ofdm_b, mcs_a, mcs_b;
|
|
u8 val8;
|
|
int group, i;
|
|
|
|
group = rtl8723a_channel_to_group(channel);
|
|
|
|
cck[0] = priv->cck_tx_power_index_A[group];
|
|
cck[1] = priv->cck_tx_power_index_B[group];
|
|
|
|
ofdm[0] = priv->ht40_1s_tx_power_index_A[group];
|
|
ofdm[1] = priv->ht40_1s_tx_power_index_B[group];
|
|
|
|
ofdmbase[0] = ofdm[0] + priv->ofdm_tx_power_index_diff[group].a;
|
|
ofdmbase[1] = ofdm[1] + priv->ofdm_tx_power_index_diff[group].b;
|
|
|
|
mcsbase[0] = ofdm[0];
|
|
mcsbase[1] = ofdm[1];
|
|
if (!ht40) {
|
|
mcsbase[0] += priv->ht20_tx_power_index_diff[group].a;
|
|
mcsbase[1] += priv->ht20_tx_power_index_diff[group].b;
|
|
}
|
|
|
|
if (priv->tx_paths > 1) {
|
|
if (ofdm[0] > priv->ht40_2s_tx_power_index_diff[group].a)
|
|
ofdm[0] -= priv->ht40_2s_tx_power_index_diff[group].a;
|
|
if (ofdm[1] > priv->ht40_2s_tx_power_index_diff[group].b)
|
|
ofdm[1] -= priv->ht40_2s_tx_power_index_diff[group].b;
|
|
}
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL)
|
|
dev_info(&priv->udev->dev,
|
|
"%s: Setting TX power CCK A: %02x, "
|
|
"CCK B: %02x, OFDM A: %02x, OFDM B: %02x\n",
|
|
__func__, cck[0], cck[1], ofdm[0], ofdm[1]);
|
|
|
|
for (i = 0; i < RTL8723A_MAX_RF_PATHS; i++) {
|
|
if (cck[i] > RF6052_MAX_TX_PWR)
|
|
cck[i] = RF6052_MAX_TX_PWR;
|
|
if (ofdm[i] > RF6052_MAX_TX_PWR)
|
|
ofdm[i] = RF6052_MAX_TX_PWR;
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
|
|
val32 &= 0xffff00ff;
|
|
val32 |= (cck[0] << 8);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
|
|
val32 &= 0xff;
|
|
val32 |= ((cck[0] << 8) | (cck[0] << 16) | (cck[0] << 24));
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
|
|
val32 &= 0xffffff00;
|
|
val32 |= cck[1];
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK1_55_MCS32);
|
|
val32 &= 0xff;
|
|
val32 |= ((cck[1] << 8) | (cck[1] << 16) | (cck[1] << 24));
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK1_55_MCS32, val32);
|
|
|
|
ofdm_a = ofdmbase[0] | ofdmbase[0] << 8 |
|
|
ofdmbase[0] << 16 | ofdmbase[0] << 24;
|
|
ofdm_b = ofdmbase[1] | ofdmbase[1] << 8 |
|
|
ofdmbase[1] << 16 | ofdmbase[1] << 24;
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm_a);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE18_06, ofdm_b);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm_a);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_RATE54_24, ofdm_b);
|
|
|
|
mcs_a = mcsbase[0] | mcsbase[0] << 8 |
|
|
mcsbase[0] << 16 | mcsbase[0] << 24;
|
|
mcs_b = mcsbase[1] | mcsbase[1] << 8 |
|
|
mcsbase[1] << 16 | mcsbase[1] << 24;
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs_a);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS03_MCS00, mcs_b);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs_a);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS07_MCS04, mcs_b);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS11_MCS08, mcs_a);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS11_MCS08, mcs_b);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS15_MCS12, mcs_a);
|
|
for (i = 0; i < 3; i++) {
|
|
if (i != 2)
|
|
val8 = (mcsbase[0] > 8) ? (mcsbase[0] - 8) : 0;
|
|
else
|
|
val8 = (mcsbase[0] > 6) ? (mcsbase[0] - 6) : 0;
|
|
rtl8xxxu_write8(priv, REG_OFDM0_XC_TX_IQ_IMBALANCE + i, val8);
|
|
}
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_MCS15_MCS12, mcs_b);
|
|
for (i = 0; i < 3; i++) {
|
|
if (i != 2)
|
|
val8 = (mcsbase[1] > 8) ? (mcsbase[1] - 8) : 0;
|
|
else
|
|
val8 = (mcsbase[1] > 6) ? (mcsbase[1] - 6) : 0;
|
|
rtl8xxxu_write8(priv, REG_OFDM0_XD_TX_IQ_IMBALANCE + i, val8);
|
|
}
|
|
}
|
|
|
|
static void
|
|
rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40)
|
|
{
|
|
u32 val32, ofdm, mcs;
|
|
u8 cck, ofdmbase, mcsbase;
|
|
int group, tx_idx;
|
|
|
|
tx_idx = 0;
|
|
group = rtl8723b_channel_to_group(channel);
|
|
|
|
cck = priv->cck_tx_power_index_B[group];
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32);
|
|
val32 &= 0xffff00ff;
|
|
val32 |= (cck << 8);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11);
|
|
val32 &= 0xff;
|
|
val32 |= ((cck << 8) | (cck << 16) | (cck << 24));
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32);
|
|
|
|
ofdmbase = priv->ht40_1s_tx_power_index_B[group];
|
|
ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b;
|
|
ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24;
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm);
|
|
|
|
mcsbase = priv->ht40_1s_tx_power_index_B[group];
|
|
if (ht40)
|
|
mcsbase += priv->ht40_tx_power_diff[tx_idx++].b;
|
|
else
|
|
mcsbase += priv->ht20_tx_power_diff[tx_idx++].b;
|
|
mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24;
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs);
|
|
rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs);
|
|
}
|
|
|
|
static void rtl8xxxu_set_linktype(struct rtl8xxxu_priv *priv,
|
|
enum nl80211_iftype linktype)
|
|
{
|
|
u8 val8;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_MSR);
|
|
val8 &= ~MSR_LINKTYPE_MASK;
|
|
|
|
switch (linktype) {
|
|
case NL80211_IFTYPE_UNSPECIFIED:
|
|
val8 |= MSR_LINKTYPE_NONE;
|
|
break;
|
|
case NL80211_IFTYPE_ADHOC:
|
|
val8 |= MSR_LINKTYPE_ADHOC;
|
|
break;
|
|
case NL80211_IFTYPE_STATION:
|
|
val8 |= MSR_LINKTYPE_STATION;
|
|
break;
|
|
case NL80211_IFTYPE_AP:
|
|
val8 |= MSR_LINKTYPE_AP;
|
|
break;
|
|
default:
|
|
goto out;
|
|
}
|
|
|
|
rtl8xxxu_write8(priv, REG_MSR, val8);
|
|
out:
|
|
return;
|
|
}
|
|
|
|
static void
|
|
rtl8xxxu_set_retry(struct rtl8xxxu_priv *priv, u16 short_retry, u16 long_retry)
|
|
{
|
|
u16 val16;
|
|
|
|
val16 = ((short_retry << RETRY_LIMIT_SHORT_SHIFT) &
|
|
RETRY_LIMIT_SHORT_MASK) |
|
|
((long_retry << RETRY_LIMIT_LONG_SHIFT) &
|
|
RETRY_LIMIT_LONG_MASK);
|
|
|
|
rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16);
|
|
}
|
|
|
|
static void
|
|
rtl8xxxu_set_spec_sifs(struct rtl8xxxu_priv *priv, u16 cck, u16 ofdm)
|
|
{
|
|
u16 val16;
|
|
|
|
val16 = ((cck << SPEC_SIFS_CCK_SHIFT) & SPEC_SIFS_CCK_MASK) |
|
|
((ofdm << SPEC_SIFS_OFDM_SHIFT) & SPEC_SIFS_OFDM_MASK);
|
|
|
|
rtl8xxxu_write16(priv, REG_SPEC_SIFS, val16);
|
|
}
|
|
|
|
static void rtl8xxxu_print_chipinfo(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
char *cut;
|
|
|
|
switch (priv->chip_cut) {
|
|
case 0:
|
|
cut = "A";
|
|
break;
|
|
case 1:
|
|
cut = "B";
|
|
break;
|
|
case 2:
|
|
cut = "C";
|
|
break;
|
|
case 3:
|
|
cut = "D";
|
|
break;
|
|
case 4:
|
|
cut = "E";
|
|
break;
|
|
default:
|
|
cut = "unknown";
|
|
}
|
|
|
|
dev_info(dev,
|
|
"RTL%s rev %s (%s) %iT%iR, TX queues %i, WiFi=%i, BT=%i, GPS=%i, HI PA=%i\n",
|
|
priv->chip_name, cut, priv->chip_vendor, priv->tx_paths,
|
|
priv->rx_paths, priv->ep_tx_count, priv->has_wifi,
|
|
priv->has_bluetooth, priv->has_gps, priv->hi_pa);
|
|
|
|
dev_info(dev, "RTL%s MAC: %pM\n", priv->chip_name, priv->mac_addr);
|
|
}
|
|
|
|
static int rtl8xxxu_identify_chip(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
u32 val32, bonding;
|
|
u16 val16;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_SYS_CFG);
|
|
priv->chip_cut = (val32 & SYS_CFG_CHIP_VERSION_MASK) >>
|
|
SYS_CFG_CHIP_VERSION_SHIFT;
|
|
if (val32 & SYS_CFG_TRP_VAUX_EN) {
|
|
dev_info(dev, "Unsupported test chip\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
if (val32 & SYS_CFG_BT_FUNC) {
|
|
if (priv->chip_cut >= 3) {
|
|
sprintf(priv->chip_name, "8723BU");
|
|
priv->rtl_chip = RTL8723B;
|
|
} else {
|
|
sprintf(priv->chip_name, "8723AU");
|
|
priv->usb_interrupts = 1;
|
|
priv->rtl_chip = RTL8723A;
|
|
}
|
|
|
|
priv->rf_paths = 1;
|
|
priv->rx_paths = 1;
|
|
priv->tx_paths = 1;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_MULTI_FUNC_CTRL);
|
|
if (val32 & MULTI_WIFI_FUNC_EN)
|
|
priv->has_wifi = 1;
|
|
if (val32 & MULTI_BT_FUNC_EN)
|
|
priv->has_bluetooth = 1;
|
|
if (val32 & MULTI_GPS_FUNC_EN)
|
|
priv->has_gps = 1;
|
|
priv->is_multi_func = 1;
|
|
} else if (val32 & SYS_CFG_TYPE_ID) {
|
|
bonding = rtl8xxxu_read32(priv, REG_HPON_FSM);
|
|
bonding &= HPON_FSM_BONDING_MASK;
|
|
if (priv->fops->has_s0s1) {
|
|
if (bonding == HPON_FSM_BONDING_1T2R) {
|
|
sprintf(priv->chip_name, "8191EU");
|
|
priv->rf_paths = 2;
|
|
priv->rx_paths = 2;
|
|
priv->tx_paths = 1;
|
|
priv->rtl_chip = RTL8191E;
|
|
} else {
|
|
sprintf(priv->chip_name, "8192EU");
|
|
priv->rf_paths = 2;
|
|
priv->rx_paths = 2;
|
|
priv->tx_paths = 2;
|
|
priv->rtl_chip = RTL8192E;
|
|
}
|
|
} else if (bonding == HPON_FSM_BONDING_1T2R) {
|
|
sprintf(priv->chip_name, "8191CU");
|
|
priv->rf_paths = 2;
|
|
priv->rx_paths = 2;
|
|
priv->tx_paths = 1;
|
|
priv->usb_interrupts = 1;
|
|
priv->rtl_chip = RTL8191C;
|
|
} else {
|
|
sprintf(priv->chip_name, "8192CU");
|
|
priv->rf_paths = 2;
|
|
priv->rx_paths = 2;
|
|
priv->tx_paths = 2;
|
|
priv->usb_interrupts = 1;
|
|
priv->rtl_chip = RTL8192C;
|
|
}
|
|
priv->has_wifi = 1;
|
|
} else {
|
|
sprintf(priv->chip_name, "8188CU");
|
|
priv->rf_paths = 1;
|
|
priv->rx_paths = 1;
|
|
priv->tx_paths = 1;
|
|
priv->rtl_chip = RTL8188C;
|
|
priv->usb_interrupts = 1;
|
|
priv->has_wifi = 1;
|
|
}
|
|
|
|
switch (priv->rtl_chip) {
|
|
case RTL8188E:
|
|
case RTL8192E:
|
|
case RTL8723B:
|
|
switch (val32 & SYS_CFG_VENDOR_EXT_MASK) {
|
|
case SYS_CFG_VENDOR_ID_TSMC:
|
|
sprintf(priv->chip_vendor, "TSMC");
|
|
break;
|
|
case SYS_CFG_VENDOR_ID_SMIC:
|
|
sprintf(priv->chip_vendor, "SMIC");
|
|
priv->vendor_smic = 1;
|
|
break;
|
|
case SYS_CFG_VENDOR_ID_UMC:
|
|
sprintf(priv->chip_vendor, "UMC");
|
|
priv->vendor_umc = 1;
|
|
break;
|
|
default:
|
|
sprintf(priv->chip_vendor, "unknown");
|
|
}
|
|
break;
|
|
default:
|
|
if (val32 & SYS_CFG_VENDOR_ID) {
|
|
sprintf(priv->chip_vendor, "UMC");
|
|
priv->vendor_umc = 1;
|
|
} else {
|
|
sprintf(priv->chip_vendor, "TSMC");
|
|
}
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_GPIO_OUTSTS);
|
|
priv->rom_rev = (val32 & GPIO_RF_RL_ID) >> 28;
|
|
|
|
val16 = rtl8xxxu_read16(priv, REG_NORMAL_SIE_EP_TX);
|
|
if (val16 & NORMAL_SIE_EP_TX_HIGH_MASK) {
|
|
priv->ep_tx_high_queue = 1;
|
|
priv->ep_tx_count++;
|
|
}
|
|
|
|
if (val16 & NORMAL_SIE_EP_TX_NORMAL_MASK) {
|
|
priv->ep_tx_normal_queue = 1;
|
|
priv->ep_tx_count++;
|
|
}
|
|
|
|
if (val16 & NORMAL_SIE_EP_TX_LOW_MASK) {
|
|
priv->ep_tx_low_queue = 1;
|
|
priv->ep_tx_count++;
|
|
}
|
|
|
|
/*
|
|
* Fallback for devices that do not provide REG_NORMAL_SIE_EP_TX
|
|
*/
|
|
if (!priv->ep_tx_count) {
|
|
switch (priv->nr_out_eps) {
|
|
case 4:
|
|
case 3:
|
|
priv->ep_tx_low_queue = 1;
|
|
priv->ep_tx_count++;
|
|
case 2:
|
|
priv->ep_tx_normal_queue = 1;
|
|
priv->ep_tx_count++;
|
|
case 1:
|
|
priv->ep_tx_high_queue = 1;
|
|
priv->ep_tx_count++;
|
|
break;
|
|
default:
|
|
dev_info(dev, "Unsupported USB TX end-points\n");
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8723au_parse_efuse(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8723au_efuse *efuse = &priv->efuse_wifi.efuse8723;
|
|
|
|
if (efuse->rtl_id != cpu_to_le16(0x8129))
|
|
return -EINVAL;
|
|
|
|
ether_addr_copy(priv->mac_addr, efuse->mac_addr);
|
|
|
|
memcpy(priv->cck_tx_power_index_A,
|
|
efuse->cck_tx_power_index_A,
|
|
sizeof(efuse->cck_tx_power_index_A));
|
|
memcpy(priv->cck_tx_power_index_B,
|
|
efuse->cck_tx_power_index_B,
|
|
sizeof(efuse->cck_tx_power_index_B));
|
|
|
|
memcpy(priv->ht40_1s_tx_power_index_A,
|
|
efuse->ht40_1s_tx_power_index_A,
|
|
sizeof(efuse->ht40_1s_tx_power_index_A));
|
|
memcpy(priv->ht40_1s_tx_power_index_B,
|
|
efuse->ht40_1s_tx_power_index_B,
|
|
sizeof(efuse->ht40_1s_tx_power_index_B));
|
|
|
|
memcpy(priv->ht20_tx_power_index_diff,
|
|
efuse->ht20_tx_power_index_diff,
|
|
sizeof(efuse->ht20_tx_power_index_diff));
|
|
memcpy(priv->ofdm_tx_power_index_diff,
|
|
efuse->ofdm_tx_power_index_diff,
|
|
sizeof(efuse->ofdm_tx_power_index_diff));
|
|
|
|
memcpy(priv->ht40_max_power_offset,
|
|
efuse->ht40_max_power_offset,
|
|
sizeof(efuse->ht40_max_power_offset));
|
|
memcpy(priv->ht20_max_power_offset,
|
|
efuse->ht20_max_power_offset,
|
|
sizeof(efuse->ht20_max_power_offset));
|
|
|
|
if (priv->efuse_wifi.efuse8723.version >= 0x01) {
|
|
priv->has_xtalk = 1;
|
|
priv->xtalk = priv->efuse_wifi.efuse8723.xtal_k & 0x3f;
|
|
}
|
|
dev_info(&priv->udev->dev, "Vendor: %.7s\n",
|
|
efuse->vendor_name);
|
|
dev_info(&priv->udev->dev, "Product: %.41s\n",
|
|
efuse->device_name);
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu;
|
|
int i;
|
|
|
|
if (efuse->rtl_id != cpu_to_le16(0x8129))
|
|
return -EINVAL;
|
|
|
|
ether_addr_copy(priv->mac_addr, efuse->mac_addr);
|
|
|
|
memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base,
|
|
sizeof(efuse->tx_power_index_A.cck_base));
|
|
memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base,
|
|
sizeof(efuse->tx_power_index_B.cck_base));
|
|
|
|
memcpy(priv->ht40_1s_tx_power_index_A,
|
|
efuse->tx_power_index_A.ht40_base,
|
|
sizeof(efuse->tx_power_index_A.ht40_base));
|
|
memcpy(priv->ht40_1s_tx_power_index_B,
|
|
efuse->tx_power_index_B.ht40_base,
|
|
sizeof(efuse->tx_power_index_B.ht40_base));
|
|
|
|
priv->ofdm_tx_power_diff[0].a =
|
|
efuse->tx_power_index_A.ht20_ofdm_1s_diff.a;
|
|
priv->ofdm_tx_power_diff[0].b =
|
|
efuse->tx_power_index_B.ht20_ofdm_1s_diff.a;
|
|
|
|
priv->ht20_tx_power_diff[0].a =
|
|
efuse->tx_power_index_A.ht20_ofdm_1s_diff.b;
|
|
priv->ht20_tx_power_diff[0].b =
|
|
efuse->tx_power_index_B.ht20_ofdm_1s_diff.b;
|
|
|
|
priv->ht40_tx_power_diff[0].a = 0;
|
|
priv->ht40_tx_power_diff[0].b = 0;
|
|
|
|
for (i = 1; i < RTL8723B_TX_COUNT; i++) {
|
|
priv->ofdm_tx_power_diff[i].a =
|
|
efuse->tx_power_index_A.pwr_diff[i - 1].ofdm;
|
|
priv->ofdm_tx_power_diff[i].b =
|
|
efuse->tx_power_index_B.pwr_diff[i - 1].ofdm;
|
|
|
|
priv->ht20_tx_power_diff[i].a =
|
|
efuse->tx_power_index_A.pwr_diff[i - 1].ht20;
|
|
priv->ht20_tx_power_diff[i].b =
|
|
efuse->tx_power_index_B.pwr_diff[i - 1].ht20;
|
|
|
|
priv->ht40_tx_power_diff[i].a =
|
|
efuse->tx_power_index_A.pwr_diff[i - 1].ht40;
|
|
priv->ht40_tx_power_diff[i].b =
|
|
efuse->tx_power_index_B.pwr_diff[i - 1].ht40;
|
|
}
|
|
|
|
priv->has_xtalk = 1;
|
|
priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f;
|
|
|
|
dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
|
|
dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
|
|
int i;
|
|
unsigned char *raw = priv->efuse_wifi.raw;
|
|
|
|
dev_info(&priv->udev->dev,
|
|
"%s: dumping efuse (0x%02zx bytes):\n",
|
|
__func__, sizeof(struct rtl8723bu_efuse));
|
|
for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) {
|
|
dev_info(&priv->udev->dev, "%02x: "
|
|
"%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
|
|
raw[i], raw[i + 1], raw[i + 2],
|
|
raw[i + 3], raw[i + 4], raw[i + 5],
|
|
raw[i + 6], raw[i + 7]);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_RTL8XXXU_UNTESTED
|
|
|
|
static int rtl8192cu_parse_efuse(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8192cu_efuse *efuse = &priv->efuse_wifi.efuse8192;
|
|
int i;
|
|
|
|
if (efuse->rtl_id != cpu_to_le16(0x8129))
|
|
return -EINVAL;
|
|
|
|
ether_addr_copy(priv->mac_addr, efuse->mac_addr);
|
|
|
|
memcpy(priv->cck_tx_power_index_A,
|
|
efuse->cck_tx_power_index_A,
|
|
sizeof(efuse->cck_tx_power_index_A));
|
|
memcpy(priv->cck_tx_power_index_B,
|
|
efuse->cck_tx_power_index_B,
|
|
sizeof(efuse->cck_tx_power_index_B));
|
|
|
|
memcpy(priv->ht40_1s_tx_power_index_A,
|
|
efuse->ht40_1s_tx_power_index_A,
|
|
sizeof(efuse->ht40_1s_tx_power_index_A));
|
|
memcpy(priv->ht40_1s_tx_power_index_B,
|
|
efuse->ht40_1s_tx_power_index_B,
|
|
sizeof(efuse->ht40_1s_tx_power_index_B));
|
|
memcpy(priv->ht40_2s_tx_power_index_diff,
|
|
efuse->ht40_2s_tx_power_index_diff,
|
|
sizeof(efuse->ht40_2s_tx_power_index_diff));
|
|
|
|
memcpy(priv->ht20_tx_power_index_diff,
|
|
efuse->ht20_tx_power_index_diff,
|
|
sizeof(efuse->ht20_tx_power_index_diff));
|
|
memcpy(priv->ofdm_tx_power_index_diff,
|
|
efuse->ofdm_tx_power_index_diff,
|
|
sizeof(efuse->ofdm_tx_power_index_diff));
|
|
|
|
memcpy(priv->ht40_max_power_offset,
|
|
efuse->ht40_max_power_offset,
|
|
sizeof(efuse->ht40_max_power_offset));
|
|
memcpy(priv->ht20_max_power_offset,
|
|
efuse->ht20_max_power_offset,
|
|
sizeof(efuse->ht20_max_power_offset));
|
|
|
|
dev_info(&priv->udev->dev, "Vendor: %.7s\n",
|
|
efuse->vendor_name);
|
|
dev_info(&priv->udev->dev, "Product: %.20s\n",
|
|
efuse->device_name);
|
|
|
|
if (efuse->rf_regulatory & 0x20) {
|
|
sprintf(priv->chip_name, "8188RU");
|
|
priv->hi_pa = 1;
|
|
}
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
|
|
unsigned char *raw = priv->efuse_wifi.raw;
|
|
|
|
dev_info(&priv->udev->dev,
|
|
"%s: dumping efuse (0x%02zx bytes):\n",
|
|
__func__, sizeof(struct rtl8192cu_efuse));
|
|
for (i = 0; i < sizeof(struct rtl8192cu_efuse); i += 8) {
|
|
dev_info(&priv->udev->dev, "%02x: "
|
|
"%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
|
|
raw[i], raw[i + 1], raw[i + 2],
|
|
raw[i + 3], raw[i + 4], raw[i + 5],
|
|
raw[i + 6], raw[i + 7]);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int rtl8192eu_parse_efuse(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8192eu_efuse *efuse = &priv->efuse_wifi.efuse8192eu;
|
|
int i;
|
|
|
|
if (efuse->rtl_id != cpu_to_le16(0x8129))
|
|
return -EINVAL;
|
|
|
|
ether_addr_copy(priv->mac_addr, efuse->mac_addr);
|
|
|
|
priv->has_xtalk = 1;
|
|
priv->xtalk = priv->efuse_wifi.efuse8192eu.xtal_k & 0x3f;
|
|
|
|
dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name);
|
|
dev_info(&priv->udev->dev, "Product: %.11s\n", efuse->device_name);
|
|
dev_info(&priv->udev->dev, "Serial: %.11s\n", efuse->serial);
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) {
|
|
unsigned char *raw = priv->efuse_wifi.raw;
|
|
|
|
dev_info(&priv->udev->dev,
|
|
"%s: dumping efuse (0x%02zx bytes):\n",
|
|
__func__, sizeof(struct rtl8192eu_efuse));
|
|
for (i = 0; i < sizeof(struct rtl8192eu_efuse); i += 8) {
|
|
dev_info(&priv->udev->dev, "%02x: "
|
|
"%02x %02x %02x %02x %02x %02x %02x %02x\n", i,
|
|
raw[i], raw[i + 1], raw[i + 2],
|
|
raw[i + 3], raw[i + 4], raw[i + 5],
|
|
raw[i + 6], raw[i + 7]);
|
|
}
|
|
}
|
|
/*
|
|
* Temporarily disable 8192eu support
|
|
*/
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
rtl8xxxu_read_efuse8(struct rtl8xxxu_priv *priv, u16 offset, u8 *data)
|
|
{
|
|
int i;
|
|
u8 val8;
|
|
u32 val32;
|
|
|
|
/* Write Address */
|
|
rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 1, offset & 0xff);
|
|
val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 2);
|
|
val8 &= 0xfc;
|
|
val8 |= (offset >> 8) & 0x03;
|
|
rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 2, val8);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_EFUSE_CTRL + 3);
|
|
rtl8xxxu_write8(priv, REG_EFUSE_CTRL + 3, val8 & 0x7f);
|
|
|
|
/* Poll for data read */
|
|
val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
|
|
for (i = 0; i < RTL8XXXU_MAX_REG_POLL; i++) {
|
|
val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
|
|
if (val32 & BIT(31))
|
|
break;
|
|
}
|
|
|
|
if (i == RTL8XXXU_MAX_REG_POLL)
|
|
return -EIO;
|
|
|
|
udelay(50);
|
|
val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
|
|
|
|
*data = val32 & 0xff;
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_read_efuse(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
int i, ret = 0;
|
|
u8 val8, word_mask, header, extheader;
|
|
u16 val16, efuse_addr, offset;
|
|
u32 val32;
|
|
|
|
val16 = rtl8xxxu_read16(priv, REG_9346CR);
|
|
if (val16 & EEPROM_ENABLE)
|
|
priv->has_eeprom = 1;
|
|
if (val16 & EEPROM_BOOT)
|
|
priv->boot_eeprom = 1;
|
|
|
|
if (priv->is_multi_func) {
|
|
val32 = rtl8xxxu_read32(priv, REG_EFUSE_TEST);
|
|
val32 = (val32 & ~EFUSE_SELECT_MASK) | EFUSE_WIFI_SELECT;
|
|
rtl8xxxu_write32(priv, REG_EFUSE_TEST, val32);
|
|
}
|
|
|
|
dev_dbg(dev, "Booting from %s\n",
|
|
priv->boot_eeprom ? "EEPROM" : "EFUSE");
|
|
|
|
rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_ENABLE);
|
|
|
|
/* 1.2V Power: From VDDON with Power Cut(0x0000[15]), default valid */
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL);
|
|
if (!(val16 & SYS_ISO_PWC_EV12V)) {
|
|
val16 |= SYS_ISO_PWC_EV12V;
|
|
rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16);
|
|
}
|
|
/* Reset: 0x0000[28], default valid */
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
if (!(val16 & SYS_FUNC_ELDR)) {
|
|
val16 |= SYS_FUNC_ELDR;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
}
|
|
|
|
/*
|
|
* Clock: Gated(0x0008[5]) 8M(0x0008[1]) clock from ANA, default valid
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_CLKR);
|
|
if (!(val16 & SYS_CLK_LOADER_ENABLE) || !(val16 & SYS_CLK_ANA8M)) {
|
|
val16 |= (SYS_CLK_LOADER_ENABLE | SYS_CLK_ANA8M);
|
|
rtl8xxxu_write16(priv, REG_SYS_CLKR, val16);
|
|
}
|
|
|
|
/* Default value is 0xff */
|
|
memset(priv->efuse_wifi.raw, 0xff, EFUSE_MAP_LEN);
|
|
|
|
efuse_addr = 0;
|
|
while (efuse_addr < EFUSE_REAL_CONTENT_LEN_8723A) {
|
|
u16 map_addr;
|
|
|
|
ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &header);
|
|
if (ret || header == 0xff)
|
|
goto exit;
|
|
|
|
if ((header & 0x1f) == 0x0f) { /* extended header */
|
|
offset = (header & 0xe0) >> 5;
|
|
|
|
ret = rtl8xxxu_read_efuse8(priv, efuse_addr++,
|
|
&extheader);
|
|
if (ret)
|
|
goto exit;
|
|
/* All words disabled */
|
|
if ((extheader & 0x0f) == 0x0f)
|
|
continue;
|
|
|
|
offset |= ((extheader & 0xf0) >> 1);
|
|
word_mask = extheader & 0x0f;
|
|
} else {
|
|
offset = (header >> 4) & 0x0f;
|
|
word_mask = header & 0x0f;
|
|
}
|
|
|
|
/* Get word enable value from PG header */
|
|
|
|
/* We have 8 bits to indicate validity */
|
|
map_addr = offset * 8;
|
|
if (map_addr >= EFUSE_MAP_LEN) {
|
|
dev_warn(dev, "%s: Illegal map_addr (%04x), "
|
|
"efuse corrupt!\n",
|
|
__func__, map_addr);
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
|
|
/* Check word enable condition in the section */
|
|
if (word_mask & BIT(i)) {
|
|
map_addr += 2;
|
|
continue;
|
|
}
|
|
|
|
ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8);
|
|
if (ret)
|
|
goto exit;
|
|
priv->efuse_wifi.raw[map_addr++] = val8;
|
|
|
|
ret = rtl8xxxu_read_efuse8(priv, efuse_addr++, &val8);
|
|
if (ret)
|
|
goto exit;
|
|
priv->efuse_wifi.raw[map_addr++] = val8;
|
|
}
|
|
}
|
|
|
|
exit:
|
|
rtl8xxxu_write8(priv, REG_EFUSE_ACCESS, EFUSE_ACCESS_DISABLE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_reset_8051(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 sys_func;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
val8 &= ~BIT(0);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
|
|
sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
sys_func &= ~SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
|
|
sys_func |= SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
|
|
}
|
|
|
|
static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 sys_func;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
|
|
val8 &= ~BIT(1);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
val8 &= ~BIT(0);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
|
|
sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
sys_func &= ~SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
|
|
val8 &= ~BIT(1);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
|
|
sys_func |= SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func);
|
|
}
|
|
|
|
static int rtl8xxxu_start_firmware(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
int ret = 0, i;
|
|
u32 val32;
|
|
|
|
/* Poll checksum report */
|
|
for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
|
|
val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
|
|
if (val32 & MCU_FW_DL_CSUM_REPORT)
|
|
break;
|
|
}
|
|
|
|
if (i == RTL8XXXU_FIRMWARE_POLL_MAX) {
|
|
dev_warn(dev, "Firmware checksum poll timed out\n");
|
|
ret = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
|
|
val32 |= MCU_FW_DL_READY;
|
|
val32 &= ~MCU_WINT_INIT_READY;
|
|
rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32);
|
|
|
|
/*
|
|
* Reset the 8051 in order for the firmware to start running,
|
|
* otherwise it won't come up on the 8192eu
|
|
*/
|
|
priv->fops->reset_8051(priv);
|
|
|
|
/* Wait for firmware to become ready */
|
|
for (i = 0; i < RTL8XXXU_FIRMWARE_POLL_MAX; i++) {
|
|
val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
|
|
if (val32 & MCU_WINT_INIT_READY)
|
|
break;
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
if (i == RTL8XXXU_FIRMWARE_POLL_MAX) {
|
|
dev_warn(dev, "Firmware failed to start\n");
|
|
ret = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Init H2C command
|
|
*/
|
|
if (priv->rtl_chip == RTL8723B)
|
|
rtl8xxxu_write8(priv, REG_HMTFR, 0x0f);
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_download_firmware(struct rtl8xxxu_priv *priv)
|
|
{
|
|
int pages, remainder, i, ret;
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
u8 *fwptr;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC + 1);
|
|
val8 |= 4;
|
|
rtl8xxxu_write8(priv, REG_SYS_FUNC + 1, val8);
|
|
|
|
/* 8051 enable */
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 |= SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
|
|
if (val8 & MCU_FW_RAM_SEL) {
|
|
pr_info("do the RAM reset\n");
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
|
|
priv->fops->reset_8051(priv);
|
|
}
|
|
|
|
/* MCU firmware download enable */
|
|
val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
|
|
val8 |= MCU_FW_DL_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8);
|
|
|
|
/* 8051 reset */
|
|
val32 = rtl8xxxu_read32(priv, REG_MCU_FW_DL);
|
|
val32 &= ~BIT(19);
|
|
rtl8xxxu_write32(priv, REG_MCU_FW_DL, val32);
|
|
|
|
/* Reset firmware download checksum */
|
|
val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL);
|
|
val8 |= MCU_FW_DL_CSUM_REPORT;
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL, val8);
|
|
|
|
pages = priv->fw_size / RTL_FW_PAGE_SIZE;
|
|
remainder = priv->fw_size % RTL_FW_PAGE_SIZE;
|
|
|
|
fwptr = priv->fw_data->data;
|
|
|
|
for (i = 0; i < pages; i++) {
|
|
val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8;
|
|
val8 |= i;
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8);
|
|
|
|
ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS,
|
|
fwptr, RTL_FW_PAGE_SIZE);
|
|
if (ret != RTL_FW_PAGE_SIZE) {
|
|
ret = -EAGAIN;
|
|
goto fw_abort;
|
|
}
|
|
|
|
fwptr += RTL_FW_PAGE_SIZE;
|
|
}
|
|
|
|
if (remainder) {
|
|
val8 = rtl8xxxu_read8(priv, REG_MCU_FW_DL + 2) & 0xF8;
|
|
val8 |= i;
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL + 2, val8);
|
|
ret = rtl8xxxu_writeN(priv, REG_FW_START_ADDRESS,
|
|
fwptr, remainder);
|
|
if (ret != remainder) {
|
|
ret = -EAGAIN;
|
|
goto fw_abort;
|
|
}
|
|
}
|
|
|
|
ret = 0;
|
|
fw_abort:
|
|
/* MCU firmware download disable */
|
|
val16 = rtl8xxxu_read16(priv, REG_MCU_FW_DL);
|
|
val16 &= ~MCU_FW_DL_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_MCU_FW_DL, val16);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_load_firmware(struct rtl8xxxu_priv *priv, char *fw_name)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
const struct firmware *fw;
|
|
int ret = 0;
|
|
u16 signature;
|
|
|
|
dev_info(dev, "%s: Loading firmware %s\n", DRIVER_NAME, fw_name);
|
|
if (request_firmware(&fw, fw_name, &priv->udev->dev)) {
|
|
dev_warn(dev, "request_firmware(%s) failed\n", fw_name);
|
|
ret = -EAGAIN;
|
|
goto exit;
|
|
}
|
|
if (!fw) {
|
|
dev_warn(dev, "Firmware data not available\n");
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
priv->fw_data = kmemdup(fw->data, fw->size, GFP_KERNEL);
|
|
if (!priv->fw_data) {
|
|
ret = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
priv->fw_size = fw->size - sizeof(struct rtl8xxxu_firmware_header);
|
|
|
|
signature = le16_to_cpu(priv->fw_data->signature);
|
|
switch (signature & 0xfff0) {
|
|
case 0x92e0:
|
|
case 0x92c0:
|
|
case 0x88c0:
|
|
case 0x5300:
|
|
case 0x2300:
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
dev_warn(dev, "%s: Invalid firmware signature: 0x%04x\n",
|
|
__func__, signature);
|
|
}
|
|
|
|
dev_info(dev, "Firmware revision %i.%i (signature 0x%04x)\n",
|
|
le16_to_cpu(priv->fw_data->major_version),
|
|
priv->fw_data->minor_version, signature);
|
|
|
|
exit:
|
|
release_firmware(fw);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8723au_load_firmware(struct rtl8xxxu_priv *priv)
|
|
{
|
|
char *fw_name;
|
|
int ret;
|
|
|
|
switch (priv->chip_cut) {
|
|
case 0:
|
|
fw_name = "rtlwifi/rtl8723aufw_A.bin";
|
|
break;
|
|
case 1:
|
|
if (priv->enable_bluetooth)
|
|
fw_name = "rtlwifi/rtl8723aufw_B.bin";
|
|
else
|
|
fw_name = "rtlwifi/rtl8723aufw_B_NoBT.bin";
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = rtl8xxxu_load_firmware(priv, fw_name);
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv)
|
|
{
|
|
char *fw_name;
|
|
int ret;
|
|
|
|
if (priv->enable_bluetooth)
|
|
fw_name = "rtlwifi/rtl8723bu_bt.bin";
|
|
else
|
|
fw_name = "rtlwifi/rtl8723bu_nic.bin";
|
|
|
|
ret = rtl8xxxu_load_firmware(priv, fw_name);
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_RTL8XXXU_UNTESTED
|
|
|
|
static int rtl8192cu_load_firmware(struct rtl8xxxu_priv *priv)
|
|
{
|
|
char *fw_name;
|
|
int ret;
|
|
|
|
if (!priv->vendor_umc)
|
|
fw_name = "rtlwifi/rtl8192cufw_TMSC.bin";
|
|
else if (priv->chip_cut || priv->rtl_chip == RTL8192C)
|
|
fw_name = "rtlwifi/rtl8192cufw_B.bin";
|
|
else
|
|
fw_name = "rtlwifi/rtl8192cufw_A.bin";
|
|
|
|
ret = rtl8xxxu_load_firmware(priv, fw_name);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int rtl8192eu_load_firmware(struct rtl8xxxu_priv *priv)
|
|
{
|
|
char *fw_name;
|
|
int ret;
|
|
|
|
fw_name = "rtlwifi/rtl8192eu_nic.bin";
|
|
|
|
ret = rtl8xxxu_load_firmware(priv, fw_name);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_firmware_self_reset(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u16 val16;
|
|
int i = 100;
|
|
|
|
/* Inform 8051 to perform reset */
|
|
rtl8xxxu_write8(priv, REG_HMTFR + 3, 0x20);
|
|
|
|
for (i = 100; i > 0; i--) {
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
|
|
if (!(val16 & SYS_FUNC_CPU_ENABLE)) {
|
|
dev_dbg(&priv->udev->dev,
|
|
"%s: Firmware self reset success!\n", __func__);
|
|
break;
|
|
}
|
|
udelay(50);
|
|
}
|
|
|
|
if (!i) {
|
|
/* Force firmware reset */
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 &= ~SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
}
|
|
}
|
|
|
|
static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 val32;
|
|
|
|
val32 = rtl8xxxu_read32(priv, 0x64);
|
|
val32 &= ~(BIT(20) | BIT(24));
|
|
rtl8xxxu_write32(priv, 0x64, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
|
|
val32 &= ~BIT(4);
|
|
rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG);
|
|
val32 |= BIT(3);
|
|
rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
|
|
val32 |= BIT(24);
|
|
rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
|
|
val32 &= ~BIT(23);
|
|
rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
|
|
val32 |= (BIT(0) | BIT(1));
|
|
rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC);
|
|
val32 &= 0xffffff00;
|
|
val32 |= 0x77;
|
|
rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
|
|
val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
|
|
rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
|
|
}
|
|
|
|
static int
|
|
rtl8xxxu_init_mac(struct rtl8xxxu_priv *priv, struct rtl8xxxu_reg8val *array)
|
|
{
|
|
int i, ret;
|
|
u16 reg;
|
|
u8 val;
|
|
|
|
for (i = 0; ; i++) {
|
|
reg = array[i].reg;
|
|
val = array[i].val;
|
|
|
|
if (reg == 0xffff && val == 0xff)
|
|
break;
|
|
|
|
ret = rtl8xxxu_write8(priv, reg, val);
|
|
if (ret != 1) {
|
|
dev_warn(&priv->udev->dev,
|
|
"Failed to initialize MAC\n");
|
|
return -EAGAIN;
|
|
}
|
|
}
|
|
|
|
if (priv->rtl_chip != RTL8723B)
|
|
rtl8xxxu_write8(priv, REG_MAX_AGGR_NUM, 0x0a);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_reg32val *array)
|
|
{
|
|
int i, ret;
|
|
u16 reg;
|
|
u32 val;
|
|
|
|
for (i = 0; ; i++) {
|
|
reg = array[i].reg;
|
|
val = array[i].val;
|
|
|
|
if (reg == 0xffff && val == 0xffffffff)
|
|
break;
|
|
|
|
ret = rtl8xxxu_write32(priv, reg, val);
|
|
if (ret != sizeof(val)) {
|
|
dev_warn(&priv->udev->dev,
|
|
"Failed to initialize PHY\n");
|
|
return -EAGAIN;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Most of this is black magic retrieved from the old rtl8723au driver
|
|
*/
|
|
static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8, ldoa15, ldov12d, lpldo, ldohci12;
|
|
u16 val16;
|
|
u32 val32;
|
|
|
|
/*
|
|
* Todo: The vendor driver maintains a table of PHY register
|
|
* addresses, which is initialized here. Do we need this?
|
|
*/
|
|
|
|
if (priv->rtl_chip == RTL8723B) {
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB |
|
|
SYS_FUNC_DIO_RF;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
|
|
} else {
|
|
val8 = rtl8xxxu_read8(priv, REG_AFE_PLL_CTRL);
|
|
udelay(2);
|
|
val8 |= AFE_PLL_320_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL, val8);
|
|
udelay(2);
|
|
|
|
rtl8xxxu_write8(priv, REG_AFE_PLL_CTRL + 1, 0xff);
|
|
udelay(2);
|
|
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
}
|
|
|
|
if (priv->rtl_chip != RTL8723B) {
|
|
/* AFE_XTAL_RF_GATE (bit 14) if addressing as 32 bit register */
|
|
val32 = rtl8xxxu_read32(priv, REG_AFE_XTAL_CTRL);
|
|
val32 &= ~AFE_XTAL_RF_GATE;
|
|
if (priv->has_bluetooth)
|
|
val32 &= ~AFE_XTAL_BT_GATE;
|
|
rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, val32);
|
|
}
|
|
|
|
/* 6. 0x1f[7:0] = 0x07 */
|
|
val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB;
|
|
rtl8xxxu_write8(priv, REG_RF_CTRL, val8);
|
|
|
|
if (priv->hi_pa)
|
|
rtl8xxxu_init_phy_regs(priv, rtl8188ru_phy_1t_highpa_table);
|
|
else if (priv->tx_paths == 2)
|
|
rtl8xxxu_init_phy_regs(priv, rtl8192cu_phy_2t_init_table);
|
|
else if (priv->rtl_chip == RTL8723B) {
|
|
/*
|
|
* Why?
|
|
*/
|
|
rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3);
|
|
rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80);
|
|
rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table);
|
|
} else
|
|
rtl8xxxu_init_phy_regs(priv, rtl8723a_phy_1t_init_table);
|
|
|
|
|
|
if (priv->rtl_chip == RTL8188C && priv->hi_pa &&
|
|
priv->vendor_umc && priv->chip_cut == 1)
|
|
rtl8xxxu_write8(priv, REG_OFDM0_AGC_PARM1 + 2, 0x50);
|
|
|
|
if (priv->tx_paths == 1 && priv->rx_paths == 2) {
|
|
/*
|
|
* For 1T2R boards, patch the registers.
|
|
*
|
|
* It looks like 8191/2 1T2R boards use path B for TX
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_TX_INFO);
|
|
val32 &= ~(BIT(0) | BIT(1));
|
|
val32 |= BIT(1);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA1_TX_INFO);
|
|
val32 &= ~0x300033;
|
|
val32 |= 0x200022;
|
|
rtl8xxxu_write32(priv, REG_FPGA1_TX_INFO, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
|
|
val32 &= 0xff000000;
|
|
val32 |= 0x45000000;
|
|
rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_TRX_PATH_ENABLE);
|
|
val32 &= ~(OFDM_RF_PATH_RX_MASK | OFDM_RF_PATH_TX_MASK);
|
|
val32 |= (OFDM_RF_PATH_RX_A | OFDM_RF_PATH_RX_B |
|
|
OFDM_RF_PATH_TX_B);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGC_PARM1);
|
|
val32 &= ~(BIT(4) | BIT(5));
|
|
val32 |= BIT(4);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_AGC_PARM1, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_CCK_RFON);
|
|
val32 &= ~(BIT(27) | BIT(26));
|
|
val32 |= BIT(27);
|
|
rtl8xxxu_write32(priv, REG_TX_CCK_RFON, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_CCK_BBON);
|
|
val32 &= ~(BIT(27) | BIT(26));
|
|
val32 |= BIT(27);
|
|
rtl8xxxu_write32(priv, REG_TX_CCK_BBON, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_RFON);
|
|
val32 &= ~(BIT(27) | BIT(26));
|
|
val32 |= BIT(27);
|
|
rtl8xxxu_write32(priv, REG_TX_OFDM_RFON, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_OFDM_BBON);
|
|
val32 &= ~(BIT(27) | BIT(26));
|
|
val32 |= BIT(27);
|
|
rtl8xxxu_write32(priv, REG_TX_OFDM_BBON, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_TO_TX);
|
|
val32 &= ~(BIT(27) | BIT(26));
|
|
val32 |= BIT(27);
|
|
rtl8xxxu_write32(priv, REG_TX_TO_TX, val32);
|
|
}
|
|
|
|
if (priv->rtl_chip == RTL8723B)
|
|
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table);
|
|
else if (priv->hi_pa)
|
|
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table);
|
|
else
|
|
rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table);
|
|
|
|
if (priv->has_xtalk) {
|
|
val32 = rtl8xxxu_read32(priv, REG_MAC_PHY_CTRL);
|
|
|
|
val8 = priv->xtalk;
|
|
val32 &= 0xff000fff;
|
|
val32 |= ((val8 | (val8 << 6)) << 12);
|
|
|
|
rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32);
|
|
}
|
|
|
|
if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) {
|
|
ldoa15 = LDOA15_ENABLE | LDOA15_OBUF;
|
|
ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT);
|
|
ldohci12 = 0x57;
|
|
lpldo = 1;
|
|
val32 = (lpldo << 24) | (ldohci12 << 16) |
|
|
(ldov12d << 8) | ldoa15;
|
|
|
|
rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_init_rf_regs(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_rfregval *array,
|
|
enum rtl8xxxu_rfpath path)
|
|
{
|
|
int i, ret;
|
|
u8 reg;
|
|
u32 val;
|
|
|
|
for (i = 0; ; i++) {
|
|
reg = array[i].reg;
|
|
val = array[i].val;
|
|
|
|
if (reg == 0xff && val == 0xffffffff)
|
|
break;
|
|
|
|
switch (reg) {
|
|
case 0xfe:
|
|
msleep(50);
|
|
continue;
|
|
case 0xfd:
|
|
mdelay(5);
|
|
continue;
|
|
case 0xfc:
|
|
mdelay(1);
|
|
continue;
|
|
case 0xfb:
|
|
udelay(50);
|
|
continue;
|
|
case 0xfa:
|
|
udelay(5);
|
|
continue;
|
|
case 0xf9:
|
|
udelay(1);
|
|
continue;
|
|
}
|
|
|
|
ret = rtl8xxxu_write_rfreg(priv, path, reg, val);
|
|
if (ret) {
|
|
dev_warn(&priv->udev->dev,
|
|
"Failed to initialize RF\n");
|
|
return -EAGAIN;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_init_phy_rf(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_rfregval *table,
|
|
enum rtl8xxxu_rfpath path)
|
|
{
|
|
u32 val32;
|
|
u16 val16, rfsi_rfenv;
|
|
u16 reg_sw_ctrl, reg_int_oe, reg_hssi_parm2;
|
|
|
|
switch (path) {
|
|
case RF_A:
|
|
reg_sw_ctrl = REG_FPGA0_XA_RF_SW_CTRL;
|
|
reg_int_oe = REG_FPGA0_XA_RF_INT_OE;
|
|
reg_hssi_parm2 = REG_FPGA0_XA_HSSI_PARM2;
|
|
break;
|
|
case RF_B:
|
|
reg_sw_ctrl = REG_FPGA0_XB_RF_SW_CTRL;
|
|
reg_int_oe = REG_FPGA0_XB_RF_INT_OE;
|
|
reg_hssi_parm2 = REG_FPGA0_XB_HSSI_PARM2;
|
|
break;
|
|
default:
|
|
dev_err(&priv->udev->dev, "%s:Unsupported RF path %c\n",
|
|
__func__, path + 'A');
|
|
return -EINVAL;
|
|
}
|
|
/* For path B, use XB */
|
|
rfsi_rfenv = rtl8xxxu_read16(priv, reg_sw_ctrl);
|
|
rfsi_rfenv &= FPGA0_RF_RFENV;
|
|
|
|
/*
|
|
* These two we might be able to optimize into one
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, reg_int_oe);
|
|
val32 |= BIT(20); /* 0x10 << 16 */
|
|
rtl8xxxu_write32(priv, reg_int_oe, val32);
|
|
udelay(1);
|
|
|
|
val32 = rtl8xxxu_read32(priv, reg_int_oe);
|
|
val32 |= BIT(4);
|
|
rtl8xxxu_write32(priv, reg_int_oe, val32);
|
|
udelay(1);
|
|
|
|
/*
|
|
* These two we might be able to optimize into one
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, reg_hssi_parm2);
|
|
val32 &= ~FPGA0_HSSI_3WIRE_ADDR_LEN;
|
|
rtl8xxxu_write32(priv, reg_hssi_parm2, val32);
|
|
udelay(1);
|
|
|
|
val32 = rtl8xxxu_read32(priv, reg_hssi_parm2);
|
|
val32 &= ~FPGA0_HSSI_3WIRE_DATA_LEN;
|
|
rtl8xxxu_write32(priv, reg_hssi_parm2, val32);
|
|
udelay(1);
|
|
|
|
rtl8xxxu_init_rf_regs(priv, table, path);
|
|
|
|
/* For path B, use XB */
|
|
val16 = rtl8xxxu_read16(priv, reg_sw_ctrl);
|
|
val16 &= ~FPGA0_RF_RFENV;
|
|
val16 |= rfsi_rfenv;
|
|
rtl8xxxu_write16(priv, reg_sw_ctrl, val16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_llt_write(struct rtl8xxxu_priv *priv, u8 address, u8 data)
|
|
{
|
|
int ret = -EBUSY;
|
|
int count = 0;
|
|
u32 value;
|
|
|
|
value = LLT_OP_WRITE | address << 8 | data;
|
|
|
|
rtl8xxxu_write32(priv, REG_LLT_INIT, value);
|
|
|
|
do {
|
|
value = rtl8xxxu_read32(priv, REG_LLT_INIT);
|
|
if ((value & LLT_OP_MASK) == LLT_OP_INACTIVE) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
} while (count++ < 20);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_init_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < last_tx_page; i++) {
|
|
ret = rtl8xxxu_llt_write(priv, i, i + 1);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
ret = rtl8xxxu_llt_write(priv, last_tx_page, 0xff);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Mark remaining pages as a ring buffer */
|
|
for (i = last_tx_page + 1; i < 0xff; i++) {
|
|
ret = rtl8xxxu_llt_write(priv, i, (i + 1));
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
/* Let last entry point to the start entry of ring buffer */
|
|
ret = rtl8xxxu_llt_write(priv, 0xff, last_tx_page + 1);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_auto_llt_table(struct rtl8xxxu_priv *priv, u8 last_tx_page)
|
|
{
|
|
u32 val32;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT);
|
|
val32 |= AUTO_LLT_INIT_LLT;
|
|
rtl8xxxu_write32(priv, REG_AUTO_LLT, val32);
|
|
|
|
for (i = 500; i; i--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_AUTO_LLT);
|
|
if (!(val32 & AUTO_LLT_INIT_LLT))
|
|
break;
|
|
usleep_range(2, 4);
|
|
}
|
|
|
|
if (!i) {
|
|
ret = -EBUSY;
|
|
dev_warn(&priv->udev->dev, "LLT table init failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_init_queue_priority(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u16 val16, hi, lo;
|
|
u16 hiq, mgq, bkq, beq, viq, voq;
|
|
int hip, mgp, bkp, bep, vip, vop;
|
|
int ret = 0;
|
|
|
|
switch (priv->ep_tx_count) {
|
|
case 1:
|
|
if (priv->ep_tx_high_queue) {
|
|
hi = TRXDMA_QUEUE_HIGH;
|
|
} else if (priv->ep_tx_low_queue) {
|
|
hi = TRXDMA_QUEUE_LOW;
|
|
} else if (priv->ep_tx_normal_queue) {
|
|
hi = TRXDMA_QUEUE_NORMAL;
|
|
} else {
|
|
hi = 0;
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
hiq = hi;
|
|
mgq = hi;
|
|
bkq = hi;
|
|
beq = hi;
|
|
viq = hi;
|
|
voq = hi;
|
|
|
|
hip = 0;
|
|
mgp = 0;
|
|
bkp = 0;
|
|
bep = 0;
|
|
vip = 0;
|
|
vop = 0;
|
|
break;
|
|
case 2:
|
|
if (priv->ep_tx_high_queue && priv->ep_tx_low_queue) {
|
|
hi = TRXDMA_QUEUE_HIGH;
|
|
lo = TRXDMA_QUEUE_LOW;
|
|
} else if (priv->ep_tx_normal_queue && priv->ep_tx_low_queue) {
|
|
hi = TRXDMA_QUEUE_NORMAL;
|
|
lo = TRXDMA_QUEUE_LOW;
|
|
} else if (priv->ep_tx_high_queue && priv->ep_tx_normal_queue) {
|
|
hi = TRXDMA_QUEUE_HIGH;
|
|
lo = TRXDMA_QUEUE_NORMAL;
|
|
} else {
|
|
ret = -EINVAL;
|
|
hi = 0;
|
|
lo = 0;
|
|
}
|
|
|
|
hiq = hi;
|
|
mgq = hi;
|
|
bkq = lo;
|
|
beq = lo;
|
|
viq = hi;
|
|
voq = hi;
|
|
|
|
hip = 0;
|
|
mgp = 0;
|
|
bkp = 1;
|
|
bep = 1;
|
|
vip = 0;
|
|
vop = 0;
|
|
break;
|
|
case 3:
|
|
beq = TRXDMA_QUEUE_LOW;
|
|
bkq = TRXDMA_QUEUE_LOW;
|
|
viq = TRXDMA_QUEUE_NORMAL;
|
|
voq = TRXDMA_QUEUE_HIGH;
|
|
mgq = TRXDMA_QUEUE_HIGH;
|
|
hiq = TRXDMA_QUEUE_HIGH;
|
|
|
|
hip = hiq ^ 3;
|
|
mgp = mgq ^ 3;
|
|
bkp = bkq ^ 3;
|
|
bep = beq ^ 3;
|
|
vip = viq ^ 3;
|
|
vop = viq ^ 3;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* None of the vendor drivers are configuring the beacon
|
|
* queue here .... why?
|
|
*/
|
|
if (!ret) {
|
|
val16 = rtl8xxxu_read16(priv, REG_TRXDMA_CTRL);
|
|
val16 &= 0x7;
|
|
val16 |= (voq << TRXDMA_CTRL_VOQ_SHIFT) |
|
|
(viq << TRXDMA_CTRL_VIQ_SHIFT) |
|
|
(beq << TRXDMA_CTRL_BEQ_SHIFT) |
|
|
(bkq << TRXDMA_CTRL_BKQ_SHIFT) |
|
|
(mgq << TRXDMA_CTRL_MGQ_SHIFT) |
|
|
(hiq << TRXDMA_CTRL_HIQ_SHIFT);
|
|
rtl8xxxu_write16(priv, REG_TRXDMA_CTRL, val16);
|
|
|
|
priv->pipe_out[TXDESC_QUEUE_VO] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[vop]);
|
|
priv->pipe_out[TXDESC_QUEUE_VI] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[vip]);
|
|
priv->pipe_out[TXDESC_QUEUE_BE] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[bep]);
|
|
priv->pipe_out[TXDESC_QUEUE_BK] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[bkp]);
|
|
priv->pipe_out[TXDESC_QUEUE_BEACON] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[0]);
|
|
priv->pipe_out[TXDESC_QUEUE_MGNT] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[mgp]);
|
|
priv->pipe_out[TXDESC_QUEUE_HIGH] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[hip]);
|
|
priv->pipe_out[TXDESC_QUEUE_CMD] =
|
|
usb_sndbulkpipe(priv->udev, priv->out_ep[0]);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_fill_iqk_matrix_a(struct rtl8xxxu_priv *priv,
|
|
bool iqk_ok, int result[][8],
|
|
int candidate, bool tx_only)
|
|
{
|
|
u32 oldval, x, tx0_a, reg;
|
|
int y, tx0_c;
|
|
u32 val32;
|
|
|
|
if (!iqk_ok)
|
|
return;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
|
|
oldval = val32 >> 22;
|
|
|
|
x = result[candidate][0];
|
|
if ((x & 0x00000200) != 0)
|
|
x = x | 0xfffffc00;
|
|
tx0_a = (x * oldval) >> 8;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
|
|
val32 &= ~0x3ff;
|
|
val32 |= tx0_a;
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
|
|
val32 &= ~BIT(31);
|
|
if ((x * oldval >> 7) & 0x1)
|
|
val32 |= BIT(31);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
|
|
|
|
y = result[candidate][1];
|
|
if ((y & 0x00000200) != 0)
|
|
y = y | 0xfffffc00;
|
|
tx0_c = (y * oldval) >> 8;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XC_TX_AFE);
|
|
val32 &= ~0xf0000000;
|
|
val32 |= (((tx0_c & 0x3c0) >> 6) << 28);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XC_TX_AFE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE);
|
|
val32 &= ~0x003f0000;
|
|
val32 |= ((tx0_c & 0x3f) << 16);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_TX_IQ_IMBALANCE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
|
|
val32 &= ~BIT(29);
|
|
if ((y * oldval >> 7) & 0x1)
|
|
val32 |= BIT(29);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
|
|
|
|
if (tx_only) {
|
|
dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__);
|
|
return;
|
|
}
|
|
|
|
reg = result[candidate][2];
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE);
|
|
val32 &= ~0x3ff;
|
|
val32 |= (reg & 0x3ff);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32);
|
|
|
|
reg = result[candidate][3] & 0x3F;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE);
|
|
val32 &= ~0xfc00;
|
|
val32 |= ((reg << 10) & 0xfc00);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_RX_IQ_IMBALANCE, val32);
|
|
|
|
reg = (result[candidate][3] >> 6) & 0xF;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_RX_IQ_EXT_ANTA);
|
|
val32 &= ~0xf0000000;
|
|
val32 |= (reg << 28);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_RX_IQ_EXT_ANTA, val32);
|
|
}
|
|
|
|
static void rtl8xxxu_fill_iqk_matrix_b(struct rtl8xxxu_priv *priv,
|
|
bool iqk_ok, int result[][8],
|
|
int candidate, bool tx_only)
|
|
{
|
|
u32 oldval, x, tx1_a, reg;
|
|
int y, tx1_c;
|
|
u32 val32;
|
|
|
|
if (!iqk_ok)
|
|
return;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
|
|
oldval = val32 >> 22;
|
|
|
|
x = result[candidate][4];
|
|
if ((x & 0x00000200) != 0)
|
|
x = x | 0xfffffc00;
|
|
tx1_a = (x * oldval) >> 8;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
|
|
val32 &= ~0x3ff;
|
|
val32 |= tx1_a;
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
|
|
val32 &= ~BIT(27);
|
|
if ((x * oldval >> 7) & 0x1)
|
|
val32 |= BIT(27);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
|
|
|
|
y = result[candidate][5];
|
|
if ((y & 0x00000200) != 0)
|
|
y = y | 0xfffffc00;
|
|
tx1_c = (y * oldval) >> 8;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XD_TX_AFE);
|
|
val32 &= ~0xf0000000;
|
|
val32 |= (((tx1_c & 0x3c0) >> 6) << 28);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XD_TX_AFE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE);
|
|
val32 &= ~0x003f0000;
|
|
val32 |= ((tx1_c & 0x3f) << 16);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XB_TX_IQ_IMBALANCE, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_ENERGY_CCA_THRES);
|
|
val32 &= ~BIT(25);
|
|
if ((y * oldval >> 7) & 0x1)
|
|
val32 |= BIT(25);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_ENERGY_CCA_THRES, val32);
|
|
|
|
if (tx_only) {
|
|
dev_dbg(&priv->udev->dev, "%s: only TX\n", __func__);
|
|
return;
|
|
}
|
|
|
|
reg = result[candidate][6];
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE);
|
|
val32 &= ~0x3ff;
|
|
val32 |= (reg & 0x3ff);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32);
|
|
|
|
reg = result[candidate][7] & 0x3f;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE);
|
|
val32 &= ~0xfc00;
|
|
val32 |= ((reg << 10) & 0xfc00);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XB_RX_IQ_IMBALANCE, val32);
|
|
|
|
reg = (result[candidate][7] >> 6) & 0xf;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_AGCR_SSI_TABLE);
|
|
val32 &= ~0x0000f000;
|
|
val32 |= (reg << 12);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_AGCR_SSI_TABLE, val32);
|
|
}
|
|
|
|
#define MAX_TOLERANCE 5
|
|
|
|
static bool rtl8xxxu_simularity_compare(struct rtl8xxxu_priv *priv,
|
|
int result[][8], int c1, int c2)
|
|
{
|
|
u32 i, j, diff, simubitmap, bound = 0;
|
|
int candidate[2] = {-1, -1}; /* for path A and path B */
|
|
bool retval = true;
|
|
|
|
if (priv->tx_paths > 1)
|
|
bound = 8;
|
|
else
|
|
bound = 4;
|
|
|
|
simubitmap = 0;
|
|
|
|
for (i = 0; i < bound; i++) {
|
|
diff = (result[c1][i] > result[c2][i]) ?
|
|
(result[c1][i] - result[c2][i]) :
|
|
(result[c2][i] - result[c1][i]);
|
|
if (diff > MAX_TOLERANCE) {
|
|
if ((i == 2 || i == 6) && !simubitmap) {
|
|
if (result[c1][i] + result[c1][i + 1] == 0)
|
|
candidate[(i / 4)] = c2;
|
|
else if (result[c2][i] + result[c2][i + 1] == 0)
|
|
candidate[(i / 4)] = c1;
|
|
else
|
|
simubitmap = simubitmap | (1 << i);
|
|
} else {
|
|
simubitmap = simubitmap | (1 << i);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (simubitmap == 0) {
|
|
for (i = 0; i < (bound / 4); i++) {
|
|
if (candidate[i] >= 0) {
|
|
for (j = i * 4; j < (i + 1) * 4 - 2; j++)
|
|
result[3][j] = result[candidate[i]][j];
|
|
retval = false;
|
|
}
|
|
}
|
|
return retval;
|
|
} else if (!(simubitmap & 0x0f)) {
|
|
/* path A OK */
|
|
for (i = 0; i < 4; i++)
|
|
result[3][i] = result[c1][i];
|
|
} else if (!(simubitmap & 0xf0) && priv->tx_paths > 1) {
|
|
/* path B OK */
|
|
for (i = 4; i < 8; i++)
|
|
result[3][i] = result[c1][i];
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static bool rtl8723bu_simularity_compare(struct rtl8xxxu_priv *priv,
|
|
int result[][8], int c1, int c2)
|
|
{
|
|
u32 i, j, diff, simubitmap, bound = 0;
|
|
int candidate[2] = {-1, -1}; /* for path A and path B */
|
|
int tmp1, tmp2;
|
|
bool retval = true;
|
|
|
|
if (priv->tx_paths > 1)
|
|
bound = 8;
|
|
else
|
|
bound = 4;
|
|
|
|
simubitmap = 0;
|
|
|
|
for (i = 0; i < bound; i++) {
|
|
if (i & 1) {
|
|
if ((result[c1][i] & 0x00000200))
|
|
tmp1 = result[c1][i] | 0xfffffc00;
|
|
else
|
|
tmp1 = result[c1][i];
|
|
|
|
if ((result[c2][i]& 0x00000200))
|
|
tmp2 = result[c2][i] | 0xfffffc00;
|
|
else
|
|
tmp2 = result[c2][i];
|
|
} else {
|
|
tmp1 = result[c1][i];
|
|
tmp2 = result[c2][i];
|
|
}
|
|
|
|
diff = (tmp1 > tmp2) ? (tmp1 - tmp2) : (tmp2 - tmp1);
|
|
|
|
if (diff > MAX_TOLERANCE) {
|
|
if ((i == 2 || i == 6) && !simubitmap) {
|
|
if (result[c1][i] + result[c1][i + 1] == 0)
|
|
candidate[(i / 4)] = c2;
|
|
else if (result[c2][i] + result[c2][i + 1] == 0)
|
|
candidate[(i / 4)] = c1;
|
|
else
|
|
simubitmap = simubitmap | (1 << i);
|
|
} else {
|
|
simubitmap = simubitmap | (1 << i);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (simubitmap == 0) {
|
|
for (i = 0; i < (bound / 4); i++) {
|
|
if (candidate[i] >= 0) {
|
|
for (j = i * 4; j < (i + 1) * 4 - 2; j++)
|
|
result[3][j] = result[candidate[i]][j];
|
|
retval = false;
|
|
}
|
|
}
|
|
return retval;
|
|
} else {
|
|
if (!(simubitmap & 0x03)) {
|
|
/* path A TX OK */
|
|
for (i = 0; i < 2; i++)
|
|
result[3][i] = result[c1][i];
|
|
}
|
|
|
|
if (!(simubitmap & 0x0c)) {
|
|
/* path A RX OK */
|
|
for (i = 2; i < 4; i++)
|
|
result[3][i] = result[c1][i];
|
|
}
|
|
|
|
if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
|
|
/* path B RX OK */
|
|
for (i = 4; i < 6; i++)
|
|
result[3][i] = result[c1][i];
|
|
}
|
|
|
|
if (!(simubitmap & 0x30) && priv->tx_paths > 1) {
|
|
/* path B RX OK */
|
|
for (i = 6; i < 8; i++)
|
|
result[3][i] = result[c1][i];
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void
|
|
rtl8xxxu_save_mac_regs(struct rtl8xxxu_priv *priv, const u32 *reg, u32 *backup)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++)
|
|
backup[i] = rtl8xxxu_read8(priv, reg[i]);
|
|
|
|
backup[i] = rtl8xxxu_read32(priv, reg[i]);
|
|
}
|
|
|
|
static void rtl8xxxu_restore_mac_regs(struct rtl8xxxu_priv *priv,
|
|
const u32 *reg, u32 *backup)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < (RTL8XXXU_MAC_REGS - 1); i++)
|
|
rtl8xxxu_write8(priv, reg[i], backup[i]);
|
|
|
|
rtl8xxxu_write32(priv, reg[i], backup[i]);
|
|
}
|
|
|
|
static void rtl8xxxu_save_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
|
|
u32 *backup, int count)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
backup[i] = rtl8xxxu_read32(priv, regs[i]);
|
|
}
|
|
|
|
static void rtl8xxxu_restore_regs(struct rtl8xxxu_priv *priv, const u32 *regs,
|
|
u32 *backup, int count)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++)
|
|
rtl8xxxu_write32(priv, regs[i], backup[i]);
|
|
}
|
|
|
|
|
|
static void rtl8xxxu_path_adda_on(struct rtl8xxxu_priv *priv, const u32 *regs,
|
|
bool path_a_on)
|
|
{
|
|
u32 path_on;
|
|
int i;
|
|
|
|
if (priv->tx_paths == 1) {
|
|
path_on = priv->fops->adda_1t_path_on;
|
|
rtl8xxxu_write32(priv, regs[0], priv->fops->adda_1t_init);
|
|
} else {
|
|
path_on = path_a_on ? priv->fops->adda_2t_path_on_a :
|
|
priv->fops->adda_2t_path_on_b;
|
|
|
|
rtl8xxxu_write32(priv, regs[0], path_on);
|
|
}
|
|
|
|
for (i = 1 ; i < RTL8XXXU_ADDA_REGS ; i++)
|
|
rtl8xxxu_write32(priv, regs[i], path_on);
|
|
}
|
|
|
|
static void rtl8xxxu_mac_calibration(struct rtl8xxxu_priv *priv,
|
|
const u32 *regs, u32 *backup)
|
|
{
|
|
int i = 0;
|
|
|
|
rtl8xxxu_write8(priv, regs[i], 0x3f);
|
|
|
|
for (i = 1 ; i < (RTL8XXXU_MAC_REGS - 1); i++)
|
|
rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(3)));
|
|
|
|
rtl8xxxu_write8(priv, regs[i], (u8)(backup[i] & ~BIT(5)));
|
|
}
|
|
|
|
static int rtl8xxxu_iqk_path_a(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 reg_eac, reg_e94, reg_e9c, reg_ea4, val32;
|
|
int result = 0;
|
|
|
|
/* path-A IQK setting */
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x10008c1f);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x10008c1f);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82140102);
|
|
|
|
val32 = (priv->rf_paths > 1) ? 0x28160202 :
|
|
/*IS_81xxC_VENDOR_UMC_B_CUT(pHalData->VersionID)?0x28160202: */
|
|
0x28160502;
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, val32);
|
|
|
|
/* path-B IQK setting */
|
|
if (priv->rf_paths > 1) {
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x10008c22);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x10008c22);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82140102);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28160202);
|
|
}
|
|
|
|
/* LO calibration setting */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x001028d1);
|
|
|
|
/* One shot, path A LOK & IQK */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
|
|
|
|
mdelay(1);
|
|
|
|
/* Check failed */
|
|
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
|
|
reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
|
|
reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
|
|
reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
|
|
|
|
if (!(reg_eac & BIT(28)) &&
|
|
((reg_e94 & 0x03ff0000) != 0x01420000) &&
|
|
((reg_e9c & 0x03ff0000) != 0x00420000))
|
|
result |= 0x01;
|
|
else /* If TX not OK, ignore RX */
|
|
goto out;
|
|
|
|
/* If TX is OK, check whether RX is OK */
|
|
if (!(reg_eac & BIT(27)) &&
|
|
((reg_ea4 & 0x03ff0000) != 0x01320000) &&
|
|
((reg_eac & 0x03ff0000) != 0x00360000))
|
|
result |= 0x02;
|
|
else
|
|
dev_warn(&priv->udev->dev, "%s: Path A RX IQK failed!\n",
|
|
__func__);
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static int rtl8xxxu_iqk_path_b(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc;
|
|
int result = 0;
|
|
|
|
/* One shot, path B LOK & IQK */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
|
|
|
|
mdelay(1);
|
|
|
|
/* Check failed */
|
|
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
|
|
reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
|
|
reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
|
|
reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
|
|
reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
|
|
|
|
if (!(reg_eac & BIT(31)) &&
|
|
((reg_eb4 & 0x03ff0000) != 0x01420000) &&
|
|
((reg_ebc & 0x03ff0000) != 0x00420000))
|
|
result |= 0x01;
|
|
else
|
|
goto out;
|
|
|
|
if (!(reg_eac & BIT(30)) &&
|
|
(((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
|
|
(((reg_ecc & 0x03ff0000) >> 16) != 0x36))
|
|
result |= 0x02;
|
|
else
|
|
dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
|
|
__func__);
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 reg_eac, reg_e94, reg_e9c, path_sel, val32;
|
|
int result = 0;
|
|
|
|
path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
|
|
|
|
/*
|
|
* Leave IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/*
|
|
* Enable path A PA in TX IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
|
|
val32 |= 0x80000;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87);
|
|
|
|
/*
|
|
* Tx IQK setting
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
|
|
|
|
/* path-A IQK setting */
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
|
|
|
|
/* LO calibration setting */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911);
|
|
|
|
/*
|
|
* Enter IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
val32 |= 0x80800000;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/*
|
|
* The vendor driver indicates the USB module is always using
|
|
* S0S1 path 1 for the 8723bu. This may be different for 8192eu
|
|
*/
|
|
if (priv->rf_paths > 1)
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
|
|
else
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
|
|
|
|
/*
|
|
* Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
|
|
* No trace of this in the 8192eu or 8188eu vendor drivers.
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
|
|
|
|
/* One shot, path A LOK & IQK */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
|
|
|
|
mdelay(1);
|
|
|
|
/* Restore Ant Path */
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
|
|
#ifdef RTL8723BU_BT
|
|
/* GNT_BT = 1 */
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
|
|
#endif
|
|
|
|
/*
|
|
* Leave IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/* Check failed */
|
|
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
|
|
reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
|
|
reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
|
|
|
|
val32 = (reg_e9c >> 16) & 0x3ff;
|
|
if (val32 & 0x200)
|
|
val32 = 0x400 - val32;
|
|
|
|
if (!(reg_eac & BIT(28)) &&
|
|
((reg_e94 & 0x03ff0000) != 0x01420000) &&
|
|
((reg_e9c & 0x03ff0000) != 0x00420000) &&
|
|
((reg_e94 & 0x03ff0000) < 0x01100000) &&
|
|
((reg_e94 & 0x03ff0000) > 0x00f00000) &&
|
|
val32 < 0xf)
|
|
result |= 0x01;
|
|
else /* If TX not OK, ignore RX */
|
|
goto out;
|
|
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32;
|
|
int result = 0;
|
|
|
|
path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
|
|
|
|
/*
|
|
* Leave IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/*
|
|
* Enable path A PA in TX IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
|
|
val32 |= 0x80000;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
|
|
|
|
/*
|
|
* Tx IQK setting
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
|
|
|
|
/* path-A IQK setting */
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
|
|
|
|
/* LO calibration setting */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911);
|
|
|
|
/*
|
|
* Enter IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
val32 |= 0x80800000;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/*
|
|
* The vendor driver indicates the USB module is always using
|
|
* S0S1 path 1 for the 8723bu. This may be different for 8192eu
|
|
*/
|
|
if (priv->rf_paths > 1)
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
|
|
else
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
|
|
|
|
/*
|
|
* Bit 12 seems to be BT_GRANT, and is only found in the 8723bu.
|
|
* No trace of this in the 8192eu or 8188eu vendor drivers.
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
|
|
|
|
/* One shot, path A LOK & IQK */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
|
|
|
|
mdelay(1);
|
|
|
|
/* Restore Ant Path */
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
|
|
#ifdef RTL8723BU_BT
|
|
/* GNT_BT = 1 */
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
|
|
#endif
|
|
|
|
/*
|
|
* Leave IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/* Check failed */
|
|
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
|
|
reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A);
|
|
reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A);
|
|
|
|
val32 = (reg_e9c >> 16) & 0x3ff;
|
|
if (val32 & 0x200)
|
|
val32 = 0x400 - val32;
|
|
|
|
if (!(reg_eac & BIT(28)) &&
|
|
((reg_e94 & 0x03ff0000) != 0x01420000) &&
|
|
((reg_e9c & 0x03ff0000) != 0x00420000) &&
|
|
((reg_e94 & 0x03ff0000) < 0x01100000) &&
|
|
((reg_e94 & 0x03ff0000) > 0x00f00000) &&
|
|
val32 < 0xf)
|
|
result |= 0x01;
|
|
else /* If TX not OK, ignore RX */
|
|
goto out;
|
|
|
|
val32 = 0x80007c00 | (reg_e94 &0x3ff0000) |
|
|
((reg_e9c & 0x3ff0000) >> 16);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK, val32);
|
|
|
|
/*
|
|
* Modify RX IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
|
|
val32 |= 0x80000;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77);
|
|
|
|
/*
|
|
* PA, PAD setting
|
|
*/
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f);
|
|
|
|
/*
|
|
* RX IQK setting
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
|
|
|
|
/* path-A IQK setting */
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c);
|
|
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000);
|
|
|
|
/* LO calibration setting */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1);
|
|
|
|
/*
|
|
* Enter IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
val32 |= 0x80800000;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
if (priv->rf_paths > 1)
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000);
|
|
else
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280);
|
|
|
|
/*
|
|
* Disable BT
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800);
|
|
|
|
/* One shot, path A LOK & IQK */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000);
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000);
|
|
|
|
mdelay(1);
|
|
|
|
/* Restore Ant Path */
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel);
|
|
#ifdef RTL8723BU_BT
|
|
/* GNT_BT = 1 */
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800);
|
|
#endif
|
|
|
|
/*
|
|
* Leave IQK mode
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/* Check failed */
|
|
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
|
|
reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2);
|
|
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780);
|
|
|
|
val32 = (reg_eac >> 16) & 0x3ff;
|
|
if (val32 & 0x200)
|
|
val32 = 0x400 - val32;
|
|
|
|
if (!(reg_eac & BIT(27)) &&
|
|
((reg_ea4 & 0x03ff0000) != 0x01320000) &&
|
|
((reg_eac & 0x03ff0000) != 0x00360000) &&
|
|
((reg_ea4 & 0x03ff0000) < 0x01100000) &&
|
|
((reg_ea4 & 0x03ff0000) > 0x00f00000) &&
|
|
val32 < 0xf)
|
|
result |= 0x02;
|
|
else /* If TX not OK, ignore RX */
|
|
goto out;
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
#ifdef RTL8723BU_PATH_B
|
|
static int rtl8723bu_iqk_path_b(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc, path_sel;
|
|
int result = 0;
|
|
|
|
path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/* One shot, path B LOK & IQK */
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000002);
|
|
rtl8xxxu_write32(priv, REG_IQK_AGC_CONT, 0x00000000);
|
|
|
|
mdelay(1);
|
|
|
|
/* Check failed */
|
|
reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2);
|
|
reg_eb4 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
|
|
reg_ebc = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
|
|
reg_ec4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
|
|
reg_ecc = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
|
|
|
|
if (!(reg_eac & BIT(31)) &&
|
|
((reg_eb4 & 0x03ff0000) != 0x01420000) &&
|
|
((reg_ebc & 0x03ff0000) != 0x00420000))
|
|
result |= 0x01;
|
|
else
|
|
goto out;
|
|
|
|
if (!(reg_eac & BIT(30)) &&
|
|
(((reg_ec4 & 0x03ff0000) >> 16) != 0x132) &&
|
|
(((reg_ecc & 0x03ff0000) >> 16) != 0x36))
|
|
result |= 0x02;
|
|
else
|
|
dev_warn(&priv->udev->dev, "%s: Path B RX IQK failed!\n",
|
|
__func__);
|
|
out:
|
|
return result;
|
|
}
|
|
#endif
|
|
|
|
static void rtl8xxxu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
|
|
int result[][8], int t)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
u32 i, val32;
|
|
int path_a_ok, path_b_ok;
|
|
int retry = 2;
|
|
const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
|
|
REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
|
|
REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
|
|
REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
|
|
REG_TX_OFDM_BBON, REG_TX_TO_RX,
|
|
REG_TX_TO_TX, REG_RX_CCK,
|
|
REG_RX_OFDM, REG_RX_WAIT_RIFS,
|
|
REG_RX_TO_RX, REG_STANDBY,
|
|
REG_SLEEP, REG_PMPD_ANAEN
|
|
};
|
|
const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
|
|
REG_TXPAUSE, REG_BEACON_CTRL,
|
|
REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
|
|
};
|
|
const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
|
|
REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
|
|
REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
|
|
REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
|
|
REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
|
|
};
|
|
|
|
/*
|
|
* Note: IQ calibration must be performed after loading
|
|
* PHY_REG.txt , and radio_a, radio_b.txt
|
|
*/
|
|
|
|
if (t == 0) {
|
|
/* Save ADDA parameters, turn Path A ADDA on */
|
|
rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
|
|
RTL8XXXU_ADDA_REGS);
|
|
rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
|
|
rtl8xxxu_save_regs(priv, iqk_bb_regs,
|
|
priv->bb_backup, RTL8XXXU_BB_REGS);
|
|
}
|
|
|
|
rtl8xxxu_path_adda_on(priv, adda_regs, true);
|
|
|
|
if (t == 0) {
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_HSSI_PARM1);
|
|
if (val32 & FPGA0_HSSI_PARM1_PI)
|
|
priv->pi_enabled = 1;
|
|
}
|
|
|
|
if (!priv->pi_enabled) {
|
|
/* Switch BB to PI mode to do IQ Calibration. */
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, 0x01000100);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, 0x01000100);
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 &= ~FPGA_RF_MODE_CCK;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XAB_RF_SW_CTRL);
|
|
val32 |= (FPGA0_RF_PAPE | (FPGA0_RF_PAPE << FPGA0_RF_BD_CTRL_SHIFT));
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XA_RF_INT_OE);
|
|
val32 &= ~BIT(10);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, val32);
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XB_RF_INT_OE);
|
|
val32 &= ~BIT(10);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XB_RF_INT_OE, val32);
|
|
|
|
if (priv->tx_paths > 1) {
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM, 0x00010000);
|
|
}
|
|
|
|
/* MAC settings */
|
|
rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
|
|
|
|
/* Page B init */
|
|
rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x00080000);
|
|
|
|
if (priv->tx_paths > 1)
|
|
rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x00080000);
|
|
|
|
/* IQ calibration setting */
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
|
|
rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
path_a_ok = rtl8xxxu_iqk_path_a(priv);
|
|
if (path_a_ok == 0x03) {
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_TX_POWER_BEFORE_IQK_A);
|
|
result[t][0] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_TX_POWER_AFTER_IQK_A);
|
|
result[t][1] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_RX_POWER_BEFORE_IQK_A_2);
|
|
result[t][2] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_RX_POWER_AFTER_IQK_A_2);
|
|
result[t][3] = (val32 >> 16) & 0x3ff;
|
|
break;
|
|
} else if (i == (retry - 1) && path_a_ok == 0x01) {
|
|
/* TX IQK OK */
|
|
dev_dbg(dev, "%s: Path A IQK Only Tx Success!!\n",
|
|
__func__);
|
|
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_TX_POWER_BEFORE_IQK_A);
|
|
result[t][0] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_TX_POWER_AFTER_IQK_A);
|
|
result[t][1] = (val32 >> 16) & 0x3ff;
|
|
}
|
|
}
|
|
|
|
if (!path_a_ok)
|
|
dev_dbg(dev, "%s: Path A IQK failed!\n", __func__);
|
|
|
|
if (priv->tx_paths > 1) {
|
|
/*
|
|
* Path A into standby
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x0);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00010000);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0x80800000);
|
|
|
|
/* Turn Path B ADDA on */
|
|
rtl8xxxu_path_adda_on(priv, adda_regs, false);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
path_b_ok = rtl8xxxu_iqk_path_b(priv);
|
|
if (path_b_ok == 0x03) {
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
|
|
result[t][4] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
|
|
result[t][5] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_B_2);
|
|
result[t][6] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_B_2);
|
|
result[t][7] = (val32 >> 16) & 0x3ff;
|
|
break;
|
|
} else if (i == (retry - 1) && path_b_ok == 0x01) {
|
|
/* TX IQK OK */
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
|
|
result[t][4] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
|
|
result[t][5] = (val32 >> 16) & 0x3ff;
|
|
}
|
|
}
|
|
|
|
if (!path_b_ok)
|
|
dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
|
|
}
|
|
|
|
/* Back to BB mode, load original value */
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, 0);
|
|
|
|
if (t) {
|
|
if (!priv->pi_enabled) {
|
|
/*
|
|
* Switch back BB to SI mode after finishing
|
|
* IQ Calibration
|
|
*/
|
|
val32 = 0x01000000;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_HSSI_PARM1, val32);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XB_HSSI_PARM1, val32);
|
|
}
|
|
|
|
/* Reload ADDA power saving parameters */
|
|
rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
|
|
RTL8XXXU_ADDA_REGS);
|
|
|
|
/* Reload MAC parameters */
|
|
rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
|
|
|
|
/* Reload BB parameters */
|
|
rtl8xxxu_restore_regs(priv, iqk_bb_regs,
|
|
priv->bb_backup, RTL8XXXU_BB_REGS);
|
|
|
|
/* Restore RX initial gain */
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_LSSI_PARM, 0x00032ed3);
|
|
|
|
if (priv->tx_paths > 1) {
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XB_LSSI_PARM,
|
|
0x00032ed3);
|
|
}
|
|
|
|
/* Load 0xe30 IQC default value */
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
|
|
}
|
|
}
|
|
|
|
static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv,
|
|
int result[][8], int t)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
u32 i, val32;
|
|
int path_a_ok /*, path_b_ok */;
|
|
int retry = 2;
|
|
const u32 adda_regs[RTL8XXXU_ADDA_REGS] = {
|
|
REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH,
|
|
REG_RX_WAIT_CCA, REG_TX_CCK_RFON,
|
|
REG_TX_CCK_BBON, REG_TX_OFDM_RFON,
|
|
REG_TX_OFDM_BBON, REG_TX_TO_RX,
|
|
REG_TX_TO_TX, REG_RX_CCK,
|
|
REG_RX_OFDM, REG_RX_WAIT_RIFS,
|
|
REG_RX_TO_RX, REG_STANDBY,
|
|
REG_SLEEP, REG_PMPD_ANAEN
|
|
};
|
|
const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = {
|
|
REG_TXPAUSE, REG_BEACON_CTRL,
|
|
REG_BEACON_CTRL_1, REG_GPIO_MUXCFG
|
|
};
|
|
const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = {
|
|
REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR,
|
|
REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B,
|
|
REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE,
|
|
REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE
|
|
};
|
|
u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff;
|
|
u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff;
|
|
|
|
/*
|
|
* Note: IQ calibration must be performed after loading
|
|
* PHY_REG.txt , and radio_a, radio_b.txt
|
|
*/
|
|
|
|
if (t == 0) {
|
|
/* Save ADDA parameters, turn Path A ADDA on */
|
|
rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup,
|
|
RTL8XXXU_ADDA_REGS);
|
|
rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
|
|
rtl8xxxu_save_regs(priv, iqk_bb_regs,
|
|
priv->bb_backup, RTL8XXXU_BB_REGS);
|
|
}
|
|
|
|
rtl8xxxu_path_adda_on(priv, adda_regs, true);
|
|
|
|
/* MAC settings */
|
|
rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING);
|
|
val32 |= 0x0f000000;
|
|
rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32);
|
|
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000);
|
|
|
|
#ifdef RTL8723BU_PATH_B
|
|
/* Set RF mode to standby Path B */
|
|
if (priv->tx_paths > 1)
|
|
rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC, 0x10000);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Page B init */
|
|
rtl8xxxu_write32(priv, REG_CONFIG_ANT_A, 0x0f600000);
|
|
|
|
if (priv->tx_paths > 1)
|
|
rtl8xxxu_write32(priv, REG_CONFIG_ANT_B, 0x0f600000);
|
|
#endif
|
|
|
|
/*
|
|
* RX IQ calibration setting for 8723B D cut large current issue
|
|
* when leaving IPS
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
|
|
val32 |= 0x80000;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
|
|
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7);
|
|
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
|
|
val32 |= 0x20;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
|
|
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
path_a_ok = rtl8723bu_iqk_path_a(priv);
|
|
if (path_a_ok == 0x01) {
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
#if 0 /* Only needed in restore case, we may need this when going to suspend */
|
|
priv->RFCalibrateInfo.TxLOK[RF_A] =
|
|
rtl8xxxu_read_rfreg(priv, RF_A,
|
|
RF6052_REG_TXM_IDAC);
|
|
#endif
|
|
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_TX_POWER_BEFORE_IQK_A);
|
|
result[t][0] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_TX_POWER_AFTER_IQK_A);
|
|
result[t][1] = (val32 >> 16) & 0x3ff;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!path_a_ok)
|
|
dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
path_a_ok = rtl8723bu_rx_iqk_path_a(priv);
|
|
if (path_a_ok == 0x03) {
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_RX_POWER_BEFORE_IQK_A_2);
|
|
result[t][2] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_RX_POWER_AFTER_IQK_A_2);
|
|
result[t][3] = (val32 >> 16) & 0x3ff;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!path_a_ok)
|
|
dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__);
|
|
|
|
if (priv->tx_paths > 1) {
|
|
#if 1
|
|
dev_warn(dev, "%s: Path B not supported\n", __func__);
|
|
#else
|
|
|
|
/*
|
|
* Path A into standby
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
val32 |= 0x80800000;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
/* Turn Path B ADDA on */
|
|
rtl8xxxu_path_adda_on(priv, adda_regs, false);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
path_b_ok = rtl8xxxu_iqk_path_b(priv);
|
|
if (path_b_ok == 0x03) {
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B);
|
|
result[t][4] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B);
|
|
result[t][5] = (val32 >> 16) & 0x3ff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!path_b_ok)
|
|
dev_dbg(dev, "%s: Path B IQK failed!\n", __func__);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
path_b_ok = rtl8723bu_rx_iqk_path_b(priv);
|
|
if (path_a_ok == 0x03) {
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_RX_POWER_BEFORE_IQK_B_2);
|
|
result[t][6] = (val32 >> 16) & 0x3ff;
|
|
val32 = rtl8xxxu_read32(priv,
|
|
REG_RX_POWER_AFTER_IQK_B_2);
|
|
result[t][7] = (val32 >> 16) & 0x3ff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!path_b_ok)
|
|
dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__);
|
|
#endif
|
|
}
|
|
|
|
/* Back to BB mode, load original value */
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 &= 0x000000ff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
|
|
if (t) {
|
|
/* Reload ADDA power saving parameters */
|
|
rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup,
|
|
RTL8XXXU_ADDA_REGS);
|
|
|
|
/* Reload MAC parameters */
|
|
rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup);
|
|
|
|
/* Reload BB parameters */
|
|
rtl8xxxu_restore_regs(priv, iqk_bb_regs,
|
|
priv->bb_backup, RTL8XXXU_BB_REGS);
|
|
|
|
/* Restore RX initial gain */
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1);
|
|
val32 &= 0xffffff00;
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc);
|
|
|
|
if (priv->tx_paths > 1) {
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1);
|
|
val32 &= 0xffffff00;
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
|
|
val32 | 0x50);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1,
|
|
val32 | xb_agc);
|
|
}
|
|
|
|
/* Load 0xe30 IQC default value */
|
|
rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00);
|
|
rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00);
|
|
}
|
|
}
|
|
|
|
static void rtl8xxxu_prepare_calibrate(struct rtl8xxxu_priv *priv, u8 start)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
|
|
if (priv->fops->mbox_ext_width < 4)
|
|
return;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.bt_wlan_calibration.cmd = H2C_8723B_BT_WLAN_CALIBRATION;
|
|
h2c.bt_wlan_calibration.data = start;
|
|
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_wlan_calibration));
|
|
}
|
|
|
|
static void rtl8723au_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
int result[4][8]; /* last is final result */
|
|
int i, candidate;
|
|
bool path_a_ok, path_b_ok;
|
|
u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
|
|
u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
|
|
s32 reg_tmp = 0;
|
|
bool simu;
|
|
|
|
rtl8xxxu_prepare_calibrate(priv, 1);
|
|
|
|
memset(result, 0, sizeof(result));
|
|
candidate = -1;
|
|
|
|
path_a_ok = false;
|
|
path_b_ok = false;
|
|
|
|
rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
rtl8xxxu_phy_iqcalibrate(priv, result, i);
|
|
|
|
if (i == 1) {
|
|
simu = rtl8xxxu_simularity_compare(priv, result, 0, 1);
|
|
if (simu) {
|
|
candidate = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == 2) {
|
|
simu = rtl8xxxu_simularity_compare(priv, result, 0, 2);
|
|
if (simu) {
|
|
candidate = 0;
|
|
break;
|
|
}
|
|
|
|
simu = rtl8xxxu_simularity_compare(priv, result, 1, 2);
|
|
if (simu) {
|
|
candidate = 1;
|
|
} else {
|
|
for (i = 0; i < 8; i++)
|
|
reg_tmp += result[3][i];
|
|
|
|
if (reg_tmp)
|
|
candidate = 3;
|
|
else
|
|
candidate = -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg_e94 = result[i][0];
|
|
reg_e9c = result[i][1];
|
|
reg_ea4 = result[i][2];
|
|
reg_eac = result[i][3];
|
|
reg_eb4 = result[i][4];
|
|
reg_ebc = result[i][5];
|
|
reg_ec4 = result[i][6];
|
|
reg_ecc = result[i][7];
|
|
}
|
|
|
|
if (candidate >= 0) {
|
|
reg_e94 = result[candidate][0];
|
|
priv->rege94 = reg_e94;
|
|
reg_e9c = result[candidate][1];
|
|
priv->rege9c = reg_e9c;
|
|
reg_ea4 = result[candidate][2];
|
|
reg_eac = result[candidate][3];
|
|
reg_eb4 = result[candidate][4];
|
|
priv->regeb4 = reg_eb4;
|
|
reg_ebc = result[candidate][5];
|
|
priv->regebc = reg_ebc;
|
|
reg_ec4 = result[candidate][6];
|
|
reg_ecc = result[candidate][7];
|
|
dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
|
|
dev_dbg(dev,
|
|
"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
|
|
"ecc=%x\n ", __func__, reg_e94, reg_e9c,
|
|
reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
|
|
path_a_ok = true;
|
|
path_b_ok = true;
|
|
} else {
|
|
reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
|
|
reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
|
|
}
|
|
|
|
if (reg_e94 && candidate >= 0)
|
|
rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
|
|
candidate, (reg_ea4 == 0));
|
|
|
|
if (priv->tx_paths > 1 && reg_eb4)
|
|
rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
|
|
candidate, (reg_ec4 == 0));
|
|
|
|
rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg,
|
|
priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
|
|
|
|
rtl8xxxu_prepare_calibrate(priv, 0);
|
|
}
|
|
|
|
static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
int result[4][8]; /* last is final result */
|
|
int i, candidate;
|
|
bool path_a_ok, path_b_ok;
|
|
u32 reg_e94, reg_e9c, reg_ea4, reg_eac;
|
|
u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc;
|
|
u32 val32, bt_control;
|
|
s32 reg_tmp = 0;
|
|
bool simu;
|
|
|
|
rtl8xxxu_prepare_calibrate(priv, 1);
|
|
|
|
memset(result, 0, sizeof(result));
|
|
candidate = -1;
|
|
|
|
path_a_ok = false;
|
|
path_b_ok = false;
|
|
|
|
bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU);
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
rtl8723bu_phy_iqcalibrate(priv, result, i);
|
|
|
|
if (i == 1) {
|
|
simu = rtl8723bu_simularity_compare(priv, result, 0, 1);
|
|
if (simu) {
|
|
candidate = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == 2) {
|
|
simu = rtl8723bu_simularity_compare(priv, result, 0, 2);
|
|
if (simu) {
|
|
candidate = 0;
|
|
break;
|
|
}
|
|
|
|
simu = rtl8723bu_simularity_compare(priv, result, 1, 2);
|
|
if (simu) {
|
|
candidate = 1;
|
|
} else {
|
|
for (i = 0; i < 8; i++)
|
|
reg_tmp += result[3][i];
|
|
|
|
if (reg_tmp)
|
|
candidate = 3;
|
|
else
|
|
candidate = -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
reg_e94 = result[i][0];
|
|
reg_e9c = result[i][1];
|
|
reg_ea4 = result[i][2];
|
|
reg_eac = result[i][3];
|
|
reg_eb4 = result[i][4];
|
|
reg_ebc = result[i][5];
|
|
reg_ec4 = result[i][6];
|
|
reg_ecc = result[i][7];
|
|
}
|
|
|
|
if (candidate >= 0) {
|
|
reg_e94 = result[candidate][0];
|
|
priv->rege94 = reg_e94;
|
|
reg_e9c = result[candidate][1];
|
|
priv->rege9c = reg_e9c;
|
|
reg_ea4 = result[candidate][2];
|
|
reg_eac = result[candidate][3];
|
|
reg_eb4 = result[candidate][4];
|
|
priv->regeb4 = reg_eb4;
|
|
reg_ebc = result[candidate][5];
|
|
priv->regebc = reg_ebc;
|
|
reg_ec4 = result[candidate][6];
|
|
reg_ecc = result[candidate][7];
|
|
dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate);
|
|
dev_dbg(dev,
|
|
"%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x "
|
|
"ecc=%x\n ", __func__, reg_e94, reg_e9c,
|
|
reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc);
|
|
path_a_ok = true;
|
|
path_b_ok = true;
|
|
} else {
|
|
reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100;
|
|
reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0;
|
|
}
|
|
|
|
if (reg_e94 && candidate >= 0)
|
|
rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result,
|
|
candidate, (reg_ea4 == 0));
|
|
|
|
if (priv->tx_paths > 1 && reg_eb4)
|
|
rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result,
|
|
candidate, (reg_ec4 == 0));
|
|
|
|
rtl8xxxu_save_regs(priv, rtl8723au_iqk_phy_iq_bb_reg,
|
|
priv->bb_recovery_backup, RTL8XXXU_BB_REGS);
|
|
|
|
rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control);
|
|
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT);
|
|
val32 |= 0x80000;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177);
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED);
|
|
val32 |= 0x20;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd);
|
|
|
|
if (priv->rf_paths > 1) {
|
|
dev_dbg(dev, "%s: beware 2T not yet supported\n", __func__);
|
|
#ifdef RTL8723BU_PATH_B
|
|
if (RF_Path == 0x0) //S1
|
|
ODM_SetIQCbyRFpath(pDM_Odm, 0);
|
|
else //S0
|
|
ODM_SetIQCbyRFpath(pDM_Odm, 1);
|
|
#endif
|
|
}
|
|
rtl8xxxu_prepare_calibrate(priv, 0);
|
|
}
|
|
|
|
static void rtl8723a_phy_lc_calibrate(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 val32;
|
|
u32 rf_amode, rf_bmode = 0, lstf;
|
|
|
|
/* Check continuous TX and Packet TX */
|
|
lstf = rtl8xxxu_read32(priv, REG_OFDM1_LSTF);
|
|
|
|
if (lstf & OFDM_LSTF_MASK) {
|
|
/* Disable all continuous TX */
|
|
val32 = lstf & ~OFDM_LSTF_MASK;
|
|
rtl8xxxu_write32(priv, REG_OFDM1_LSTF, val32);
|
|
|
|
/* Read original RF mode Path A */
|
|
rf_amode = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_AC);
|
|
|
|
/* Set RF mode to standby Path A */
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC,
|
|
(rf_amode & 0x8ffff) | 0x10000);
|
|
|
|
/* Path-B */
|
|
if (priv->tx_paths > 1) {
|
|
rf_bmode = rtl8xxxu_read_rfreg(priv, RF_B,
|
|
RF6052_REG_AC);
|
|
|
|
rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC,
|
|
(rf_bmode & 0x8ffff) | 0x10000);
|
|
}
|
|
} else {
|
|
/* Deal with Packet TX case */
|
|
/* block all queues */
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
|
|
}
|
|
|
|
/* Start LC calibration */
|
|
if (priv->fops->has_s0s1)
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdfbe0);
|
|
val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_MODE_AG);
|
|
val32 |= 0x08000;
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, val32);
|
|
|
|
msleep(100);
|
|
|
|
if (priv->fops->has_s0s1)
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_S0S1, 0xdffe0);
|
|
|
|
/* Restore original parameters */
|
|
if (lstf & OFDM_LSTF_MASK) {
|
|
/* Path-A */
|
|
rtl8xxxu_write32(priv, REG_OFDM1_LSTF, lstf);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, rf_amode);
|
|
|
|
/* Path-B */
|
|
if (priv->tx_paths > 1)
|
|
rtl8xxxu_write_rfreg(priv, RF_B, RF6052_REG_AC,
|
|
rf_bmode);
|
|
} else /* Deal with Packet TX case */
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0x00);
|
|
}
|
|
|
|
static int rtl8xxxu_set_mac(struct rtl8xxxu_priv *priv)
|
|
{
|
|
int i;
|
|
u16 reg;
|
|
|
|
reg = REG_MACID;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
rtl8xxxu_write8(priv, reg + i, priv->mac_addr[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_set_bssid(struct rtl8xxxu_priv *priv, const u8 *bssid)
|
|
{
|
|
int i;
|
|
u16 reg;
|
|
|
|
dev_dbg(&priv->udev->dev, "%s: (%pM)\n", __func__, bssid);
|
|
|
|
reg = REG_BSSID;
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
rtl8xxxu_write8(priv, reg + i, bssid[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
rtl8xxxu_set_ampdu_factor(struct rtl8xxxu_priv *priv, u8 ampdu_factor)
|
|
{
|
|
u8 vals[4] = { 0x41, 0xa8, 0x72, 0xb9 };
|
|
u8 max_agg = 0xf;
|
|
int i;
|
|
|
|
ampdu_factor = 1 << (ampdu_factor + 2);
|
|
if (ampdu_factor > max_agg)
|
|
ampdu_factor = max_agg;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if ((vals[i] & 0xf0) > (ampdu_factor << 4))
|
|
vals[i] = (vals[i] & 0x0f) | (ampdu_factor << 4);
|
|
|
|
if ((vals[i] & 0x0f) > ampdu_factor)
|
|
vals[i] = (vals[i] & 0xf0) | ampdu_factor;
|
|
|
|
rtl8xxxu_write8(priv, REG_AGGLEN_LMT + i, vals[i]);
|
|
}
|
|
}
|
|
|
|
static void rtl8xxxu_set_ampdu_min_space(struct rtl8xxxu_priv *priv, u8 density)
|
|
{
|
|
u8 val8;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_AMPDU_MIN_SPACE);
|
|
val8 &= 0xf8;
|
|
val8 |= density;
|
|
rtl8xxxu_write8(priv, REG_AMPDU_MIN_SPACE, val8);
|
|
}
|
|
|
|
static int rtl8xxxu_active_to_emu(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
int count, ret;
|
|
|
|
/* Start of rtl8723AU_card_enable_flow */
|
|
/* Act to Cardemu sequence*/
|
|
/* Turn off RF */
|
|
rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
|
|
|
|
/* 0x004E[7] = 0, switch DPDT_SEL_P output from register 0x0065[2] */
|
|
val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
|
|
val8 &= ~LEDCFG2_DPDT_SELECT;
|
|
rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
|
|
|
|
/* 0x0005[1] = 1 turn off MAC by HW state machine*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 |= BIT(1);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
if ((val8 & BIT(1)) == 0)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
|
|
__func__);
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* 0x0000[5] = 1 analog Ips to digital, 1:isolation */
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
|
|
val8 |= SYS_ISO_ANALOG_IPS;
|
|
rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
|
|
|
|
/* 0x0020[0] = 0 disable LDOA12 MACRO block*/
|
|
val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
|
|
val8 &= ~LDOA15_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
int count, ret;
|
|
|
|
/* Turn off RF */
|
|
rtl8xxxu_write8(priv, REG_RF_CTRL, 0);
|
|
|
|
/* Enable rising edge triggering interrupt */
|
|
val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM);
|
|
val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ;
|
|
rtl8xxxu_write16(priv, REG_GPIO_INTM, val16);
|
|
|
|
/* Release WLON reset 0x04[16]= 1*/
|
|
val32 = rtl8xxxu_read32(priv, REG_GPIO_INTM);
|
|
val32 |= APS_FSMCO_WLON_RESET;
|
|
rtl8xxxu_write32(priv, REG_GPIO_INTM, val32);
|
|
|
|
/* 0x0005[1] = 1 turn off MAC by HW state machine*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 |= BIT(1);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
if ((val8 & BIT(1)) == 0)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n",
|
|
__func__);
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* Enable BT control XTAL setting */
|
|
val8 = rtl8xxxu_read8(priv, REG_AFE_MISC);
|
|
val8 &= ~AFE_MISC_WL_XTAL_CTRL;
|
|
rtl8xxxu_write8(priv, REG_AFE_MISC, val8);
|
|
|
|
/* 0x0000[5] = 1 analog Ips to digital, 1:isolation */
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
|
|
val8 |= SYS_ISO_ANALOG_IPS;
|
|
rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
|
|
|
|
/* 0x0020[0] = 0 disable LDOA12 MACRO block*/
|
|
val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
|
|
val8 &= ~LDOA15_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_active_to_lps(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u8 val32;
|
|
int count, ret;
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
|
|
|
|
/*
|
|
* Poll - wait for RX packet to complete
|
|
*/
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, 0x5f8);
|
|
if (!val32)
|
|
break;
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
dev_warn(&priv->udev->dev,
|
|
"%s: RX poll timed out (0x05f8)\n", __func__);
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* Disable CCK and OFDM, clock gated */
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
|
|
val8 &= ~SYS_FUNC_BBRSTB;
|
|
rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
|
|
|
|
udelay(2);
|
|
|
|
/* Reset baseband */
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_FUNC);
|
|
val8 &= ~SYS_FUNC_BB_GLB_RSTN;
|
|
rtl8xxxu_write8(priv, REG_SYS_FUNC, val8);
|
|
|
|
/* Reset MAC TRX */
|
|
val8 = rtl8xxxu_read8(priv, REG_CR);
|
|
val8 = CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_CR, val8);
|
|
|
|
/* Reset MAC TRX */
|
|
val8 = rtl8xxxu_read8(priv, REG_CR + 1);
|
|
val8 &= ~BIT(1); /* CR_SECURITY_ENABLE */
|
|
rtl8xxxu_write8(priv, REG_CR + 1, val8);
|
|
|
|
/* Respond TX OK to scheduler */
|
|
val8 = rtl8xxxu_read8(priv, REG_DUAL_TSF_RST);
|
|
val8 |= DUAL_TSF_TX_OK;
|
|
rtl8xxxu_write8(priv, REG_DUAL_TSF_RST, val8);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8723a_disabled_to_emu(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
|
|
/* Clear suspend enable and power down enable*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~(BIT(3) | BIT(7));
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* 0x48[16] = 0 to disable GPIO9 as EXT WAKEUP*/
|
|
val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
|
|
val8 &= ~BIT(0);
|
|
rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
|
|
|
|
/* 0x04[12:11] = 11 enable WL suspend*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~(BIT(3) | BIT(4));
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
}
|
|
|
|
static void rtl8192e_disabled_to_emu(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
|
|
/* Clear suspend enable and power down enable*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~(BIT(3) | BIT(4));
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
}
|
|
|
|
static int rtl8192e_emu_to_active(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u32 val32;
|
|
int count, ret = 0;
|
|
|
|
/* disable HWPDN 0x04[15]=0*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~BIT(7);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* disable SW LPS 0x04[10]= 0 */
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~BIT(2);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* disable WL suspend*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~(BIT(3) | BIT(4));
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* wait till 0x04[17] = 1 power ready*/
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
if (val32 & BIT(17))
|
|
break;
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* We should be able to optimize the following three entries into one */
|
|
|
|
/* release WLON reset 0x04[16]= 1*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
|
|
|
|
/* set, then poll until 0 */
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
val32 |= APS_FSMCO_MAC_ENABLE;
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8723a_emu_to_active(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u32 val32;
|
|
int count, ret = 0;
|
|
|
|
/* 0x20[0] = 1 enable LDOA12 MACRO block for all interface*/
|
|
val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
|
|
val8 |= LDOA15_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
|
|
|
|
/* 0x67[0] = 0 to disable BT_GPS_SEL pins*/
|
|
val8 = rtl8xxxu_read8(priv, 0x0067);
|
|
val8 &= ~BIT(4);
|
|
rtl8xxxu_write8(priv, 0x0067, val8);
|
|
|
|
mdelay(1);
|
|
|
|
/* 0x00[5] = 0 release analog Ips to digital, 1:isolation */
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
|
|
val8 &= ~SYS_ISO_ANALOG_IPS;
|
|
rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
|
|
|
|
/* disable SW LPS 0x04[10]= 0 */
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~BIT(2);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* wait till 0x04[17] = 1 power ready*/
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
if (val32 & BIT(17))
|
|
break;
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* We should be able to optimize the following three entries into one */
|
|
|
|
/* release WLON reset 0x04[16]= 1*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
|
|
|
|
/* disable HWPDN 0x04[15]= 0*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~BIT(7);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* disable WL suspend*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~(BIT(3) | BIT(4));
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* set, then poll until 0 */
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
val32 |= APS_FSMCO_MAC_ENABLE;
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* 0x4C[23] = 0x4E[7] = 1, switch DPDT_SEL_P output from WL BB */
|
|
/*
|
|
* Note: Vendor driver actually clears this bit, despite the
|
|
* documentation claims it's being set!
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
|
|
val8 |= LEDCFG2_DPDT_SELECT;
|
|
val8 &= ~LEDCFG2_DPDT_SELECT;
|
|
rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u32 val32;
|
|
int count, ret = 0;
|
|
|
|
/* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */
|
|
val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL);
|
|
val8 |= LDOA15_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8);
|
|
|
|
/* 0x67[0] = 0 to disable BT_GPS_SEL pins*/
|
|
val8 = rtl8xxxu_read8(priv, 0x0067);
|
|
val8 &= ~BIT(4);
|
|
rtl8xxxu_write8(priv, 0x0067, val8);
|
|
|
|
mdelay(1);
|
|
|
|
/* 0x00[5] = 0 release analog Ips to digital, 1:isolation */
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
|
|
val8 &= ~SYS_ISO_ANALOG_IPS;
|
|
rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
|
|
|
|
/* Disable SW LPS 0x04[10]= 0 */
|
|
val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO);
|
|
val32 &= ~APS_FSMCO_SW_LPS;
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
/* Wait until 0x04[17] = 1 power ready */
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
if (val32 & BIT(17))
|
|
break;
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* We should be able to optimize the following three entries into one */
|
|
|
|
/* Release WLON reset 0x04[16]= 1*/
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
val32 |= APS_FSMCO_WLON_RESET;
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
/* Disable HWPDN 0x04[15]= 0*/
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
val32 &= ~APS_FSMCO_HW_POWERDOWN;
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
/* Disable WL suspend*/
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE);
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
/* Set, then poll until 0 */
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
val32 |= APS_FSMCO_MAC_ENABLE;
|
|
rtl8xxxu_write32(priv, REG_APS_FSMCO, val32);
|
|
|
|
for (count = RTL8XXXU_MAX_REG_POLL; count; count--) {
|
|
val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO);
|
|
if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
if (!count) {
|
|
ret = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* Enable WL control XTAL setting */
|
|
val8 = rtl8xxxu_read8(priv, REG_AFE_MISC);
|
|
val8 |= AFE_MISC_WL_XTAL_CTRL;
|
|
rtl8xxxu_write8(priv, REG_AFE_MISC, val8);
|
|
|
|
/* Enable falling edge triggering interrupt */
|
|
val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1);
|
|
val8 |= BIT(1);
|
|
rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8);
|
|
|
|
/* Enable GPIO9 interrupt mode */
|
|
val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1);
|
|
val8 |= BIT(1);
|
|
rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8);
|
|
|
|
/* Enable GPIO9 input mode */
|
|
val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2);
|
|
val8 &= ~BIT(1);
|
|
rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8);
|
|
|
|
/* Enable HSISR GPIO[C:0] interrupt */
|
|
val8 = rtl8xxxu_read8(priv, REG_HSIMR);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_HSIMR, val8);
|
|
|
|
/* Enable HSISR GPIO9 interrupt */
|
|
val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2);
|
|
val8 |= BIT(1);
|
|
rtl8xxxu_write8(priv, REG_HSIMR + 2, val8);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL);
|
|
val8 |= MULTI_WIFI_HW_ROF_EN;
|
|
rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8);
|
|
|
|
/* For GPIO9 internal pull high setting BIT(14) */
|
|
val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1);
|
|
val8 |= BIT(6);
|
|
rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_emu_to_disabled(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
|
|
/* 0x0007[7:0] = 0x20 SOP option to disable BG/MB */
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 3, 0x20);
|
|
|
|
/* 0x04[12:11] = 01 enable WL suspend */
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 &= ~BIT(4);
|
|
val8 |= BIT(3);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1);
|
|
val8 |= BIT(7);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8);
|
|
|
|
/* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */
|
|
val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_flush_fifo(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct device *dev = &priv->udev->dev;
|
|
u32 val32;
|
|
int retry, retval;
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM);
|
|
val32 |= RXPKT_NUM_RW_RELEASE_EN;
|
|
rtl8xxxu_write32(priv, REG_RXPKT_NUM, val32);
|
|
|
|
retry = 100;
|
|
retval = -EBUSY;
|
|
|
|
do {
|
|
val32 = rtl8xxxu_read32(priv, REG_RXPKT_NUM);
|
|
if (val32 & RXPKT_NUM_RXDMA_IDLE) {
|
|
retval = 0;
|
|
break;
|
|
}
|
|
} while (retry--);
|
|
|
|
rtl8xxxu_write16(priv, REG_RQPN_NPQ, 0);
|
|
rtl8xxxu_write32(priv, REG_RQPN, 0x80000000);
|
|
mdelay(2);
|
|
|
|
if (!retry)
|
|
dev_warn(dev, "Failed to flush FIFO\n");
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int rtl8723au_power_on(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
int ret;
|
|
|
|
/*
|
|
* RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register
|
|
*/
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0);
|
|
|
|
rtl8723a_disabled_to_emu(priv);
|
|
|
|
ret = rtl8723a_emu_to_active(priv);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/*
|
|
* 0x0004[19] = 1, reset 8051
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 2);
|
|
val8 |= BIT(3);
|
|
rtl8xxxu_write8(priv, REG_APS_FSMCO + 2, val8);
|
|
|
|
/*
|
|
* Enable MAC DMA/WMAC/SCHEDULE/SEC block
|
|
* Set CR bit10 to enable 32k calibration.
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_CR);
|
|
val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
|
|
CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
|
|
CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
|
|
CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
|
|
CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
|
|
rtl8xxxu_write16(priv, REG_CR, val16);
|
|
|
|
/* For EFuse PG */
|
|
val32 = rtl8xxxu_read32(priv, REG_EFUSE_CTRL);
|
|
val32 &= ~(BIT(28) | BIT(29) | BIT(30));
|
|
val32 |= (0x06 << 28);
|
|
rtl8xxxu_write32(priv, REG_EFUSE_CTRL, val32);
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
int ret;
|
|
|
|
rtl8723a_disabled_to_emu(priv);
|
|
|
|
ret = rtl8723b_emu_to_active(priv);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/*
|
|
* Enable MAC DMA/WMAC/SCHEDULE/SEC block
|
|
* Set CR bit10 to enable 32k calibration.
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_CR);
|
|
val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
|
|
CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
|
|
CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
|
|
CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
|
|
CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
|
|
rtl8xxxu_write16(priv, REG_CR, val16);
|
|
|
|
/*
|
|
* BT coexist power on settings. This is identical for 1 and 2
|
|
* antenna parts.
|
|
*/
|
|
rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20);
|
|
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
|
|
rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18);
|
|
rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
|
|
/* Antenna inverse */
|
|
rtl8xxxu_write8(priv, 0xfe08, 0x01);
|
|
|
|
val16 = rtl8xxxu_read16(priv, REG_PWR_DATA);
|
|
val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
|
|
rtl8xxxu_write16(priv, REG_PWR_DATA, val16);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
|
|
val32 |= LEDCFG0_DPDT_SELECT;
|
|
rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
|
|
val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA;
|
|
rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_RTL8XXXU_UNTESTED
|
|
|
|
static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
int i;
|
|
|
|
for (i = 100; i; i--) {
|
|
val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO);
|
|
if (val8 & APS_FSMCO_PFM_ALDN)
|
|
break;
|
|
}
|
|
|
|
if (!i) {
|
|
pr_info("%s: Poll failed\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* RSV_CTRL 0x001C[7:0] = 0x00, unlock ISO/CLK/Power control register
|
|
*/
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0);
|
|
rtl8xxxu_write8(priv, REG_SPS0_CTRL, 0x2b);
|
|
udelay(100);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_LDOV12D_CTRL);
|
|
if (!(val8 & LDOV12D_ENABLE)) {
|
|
pr_info("%s: Enabling LDOV12D (%02x)\n", __func__, val8);
|
|
val8 |= LDOV12D_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_LDOV12D_CTRL, val8);
|
|
|
|
udelay(100);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL);
|
|
val8 &= ~SYS_ISO_MD2PP;
|
|
rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8);
|
|
}
|
|
|
|
/*
|
|
* Auto enable WLAN
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
|
|
val16 |= APS_FSMCO_MAC_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
|
|
|
|
for (i = 1000; i; i--) {
|
|
val16 = rtl8xxxu_read16(priv, REG_APS_FSMCO);
|
|
if (!(val16 & APS_FSMCO_MAC_ENABLE))
|
|
break;
|
|
}
|
|
if (!i) {
|
|
pr_info("%s: FSMCO_MAC_ENABLE poll failed\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Enable radio, GPIO, LED
|
|
*/
|
|
val16 = APS_FSMCO_HW_SUSPEND | APS_FSMCO_ENABLE_POWERDOWN |
|
|
APS_FSMCO_PFM_ALDN;
|
|
rtl8xxxu_write16(priv, REG_APS_FSMCO, val16);
|
|
|
|
/*
|
|
* Release RF digital isolation
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_ISO_CTRL);
|
|
val16 &= ~SYS_ISO_DIOR;
|
|
rtl8xxxu_write16(priv, REG_SYS_ISO_CTRL, val16);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL);
|
|
val8 &= ~APSD_CTRL_OFF;
|
|
rtl8xxxu_write8(priv, REG_APSD_CTRL, val8);
|
|
for (i = 200; i; i--) {
|
|
val8 = rtl8xxxu_read8(priv, REG_APSD_CTRL);
|
|
if (!(val8 & APSD_CTRL_OFF_STATUS))
|
|
break;
|
|
}
|
|
|
|
if (!i) {
|
|
pr_info("%s: APSD_CTRL poll failed\n", __func__);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Enable MAC DMA/WMAC/SCHEDULE/SEC block
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_CR);
|
|
val16 |= CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
|
|
CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | CR_PROTOCOL_ENABLE |
|
|
CR_SCHEDULE_ENABLE | CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_CR, val16);
|
|
|
|
/*
|
|
* Workaround for 8188RU LNA power leakage problem.
|
|
*/
|
|
if (priv->rtl_chip == RTL8188C && priv->hi_pa) {
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM);
|
|
val32 &= ~BIT(1);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int rtl8192eu_power_on(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u16 val16;
|
|
u32 val32;
|
|
int ret;
|
|
|
|
ret = 0;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_SYS_CFG);
|
|
if (val32 & SYS_CFG_SPS_LDO_SEL) {
|
|
rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0xc3);
|
|
} else {
|
|
/*
|
|
* Raise 1.2V voltage
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_8192E_LDOV12_CTRL);
|
|
val32 &= 0xff0fffff;
|
|
val32 |= 0x00500000;
|
|
rtl8xxxu_write32(priv, REG_8192E_LDOV12_CTRL, val32);
|
|
rtl8xxxu_write8(priv, REG_LDO_SW_CTRL, 0x83);
|
|
}
|
|
|
|
rtl8192e_disabled_to_emu(priv);
|
|
|
|
ret = rtl8192e_emu_to_active(priv);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
rtl8xxxu_write16(priv, REG_CR, 0x0000);
|
|
|
|
/*
|
|
* Enable MAC DMA/WMAC/SCHEDULE/SEC block
|
|
* Set CR bit10 to enable 32k calibration.
|
|
*/
|
|
val16 = rtl8xxxu_read16(priv, REG_CR);
|
|
val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE |
|
|
CR_TXDMA_ENABLE | CR_RXDMA_ENABLE |
|
|
CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE |
|
|
CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE |
|
|
CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE);
|
|
rtl8xxxu_write16(priv, REG_CR, val16);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_power_off(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
|
|
/*
|
|
* Workaround for 8188RU LNA power leakage problem.
|
|
*/
|
|
if (priv->rtl_chip == RTL8188C && priv->hi_pa) {
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_XCD_RF_PARM);
|
|
val32 |= BIT(1);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_PARM, val32);
|
|
}
|
|
|
|
rtl8xxxu_flush_fifo(priv);
|
|
|
|
rtl8xxxu_active_to_lps(priv);
|
|
|
|
/* Turn off RF */
|
|
rtl8xxxu_write8(priv, REG_RF_CTRL, 0x00);
|
|
|
|
/* Reset Firmware if running in RAM */
|
|
if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
|
|
rtl8xxxu_firmware_self_reset(priv);
|
|
|
|
/* Reset MCU */
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 &= ~SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
|
|
/* Reset MCU ready status */
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
|
|
|
|
rtl8xxxu_active_to_emu(priv);
|
|
rtl8xxxu_emu_to_disabled(priv);
|
|
|
|
/* Reset MCU IO Wrapper */
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
val8 &= ~BIT(0);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1);
|
|
val8 |= BIT(0);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8);
|
|
|
|
/* RSV_CTRL 0x1C[7:0] = 0x0e lock ISO/CLK/Power control register */
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL, 0x0e);
|
|
}
|
|
|
|
static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u8 val8;
|
|
u16 val16;
|
|
|
|
rtl8xxxu_flush_fifo(priv);
|
|
|
|
/*
|
|
* Disable TX report timer
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
|
|
val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
|
|
|
|
rtl8xxxu_write16(priv, REG_CR, 0x0000);
|
|
|
|
rtl8xxxu_active_to_lps(priv);
|
|
|
|
/* Reset Firmware if running in RAM */
|
|
if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL)
|
|
rtl8xxxu_firmware_self_reset(priv);
|
|
|
|
/* Reset MCU */
|
|
val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC);
|
|
val16 &= ~SYS_FUNC_CPU_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_SYS_FUNC, val16);
|
|
|
|
/* Reset MCU ready status */
|
|
rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00);
|
|
|
|
rtl8723bu_active_to_emu(priv);
|
|
rtl8xxxu_emu_to_disabled(priv);
|
|
}
|
|
|
|
#ifdef NEED_PS_TDMA
|
|
static void rtl8723bu_set_ps_tdma(struct rtl8xxxu_priv *priv,
|
|
u8 arg1, u8 arg2, u8 arg3, u8 arg4, u8 arg5)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.b_type_dma.cmd = H2C_8723B_B_TYPE_TDMA;
|
|
h2c.b_type_dma.data1 = arg1;
|
|
h2c.b_type_dma.data2 = arg2;
|
|
h2c.b_type_dma.data3 = arg3;
|
|
h2c.b_type_dma.data4 = arg4;
|
|
h2c.b_type_dma.data5 = arg5;
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_type_dma));
|
|
}
|
|
#endif
|
|
|
|
static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
u32 val32;
|
|
u8 val8;
|
|
|
|
/*
|
|
* No indication anywhere as to what 0x0790 does. The 2 antenna
|
|
* vendor code preserves bits 6-7 here.
|
|
*/
|
|
rtl8xxxu_write8(priv, 0x0790, 0x05);
|
|
/*
|
|
* 0x0778 seems to be related to enabling the number of antennas
|
|
* In the vendor driver halbtc8723b2ant_InitHwConfig() sets it
|
|
* to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01
|
|
*/
|
|
rtl8xxxu_write8(priv, 0x0778, 0x01);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG);
|
|
val8 |= BIT(5);
|
|
rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8);
|
|
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780);
|
|
|
|
rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */
|
|
|
|
/*
|
|
* Set BT grant to low
|
|
*/
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.bt_grant.cmd = H2C_8723B_BT_GRANT;
|
|
h2c.bt_grant.data = 0;
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant));
|
|
|
|
/*
|
|
* WLAN action by PTA
|
|
*/
|
|
rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04);
|
|
|
|
/*
|
|
* BT select S0/S1 controlled by WiFi
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, 0x0067);
|
|
val8 |= BIT(5);
|
|
rtl8xxxu_write8(priv, 0x0067, val8);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_PWR_DATA);
|
|
val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN;
|
|
rtl8xxxu_write32(priv, REG_PWR_DATA, val32);
|
|
|
|
/*
|
|
* Bits 6/7 are marked in/out ... but for what?
|
|
*/
|
|
rtl8xxxu_write8(priv, 0x0974, 0xff);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER);
|
|
val32 |= (BIT(0) | BIT(1));
|
|
rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32);
|
|
|
|
rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_LEDCFG0);
|
|
val32 &= ~BIT(24);
|
|
val32 |= BIT(23);
|
|
rtl8xxxu_write32(priv, REG_LEDCFG0, val32);
|
|
|
|
/*
|
|
* Fix external switch Main->S1, Aux->S0
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1);
|
|
val8 &= ~BIT(0);
|
|
rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8);
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV;
|
|
h2c.ant_sel_rsv.ant_inverse = 1;
|
|
h2c.ant_sel_rsv.int_switch_type = 0;
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv));
|
|
|
|
/*
|
|
* 0x280, 0x00, 0x200, 0x80 - not clear
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00);
|
|
|
|
/*
|
|
* Software control, antenna at WiFi side
|
|
*/
|
|
#ifdef NEED_PS_TDMA
|
|
rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00);
|
|
#endif
|
|
|
|
rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555);
|
|
rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555);
|
|
rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff);
|
|
rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03);
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.bt_info.cmd = H2C_8723B_BT_INFO;
|
|
h2c.bt_info.data = BIT(0);
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info));
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT;
|
|
h2c.ignore_wlan.data = 0;
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan));
|
|
}
|
|
|
|
static void rtl8723b_disable_rf(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 val32;
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA);
|
|
val32 &= ~(BIT(22) | BIT(23));
|
|
rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32);
|
|
}
|
|
|
|
static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 agg_rx;
|
|
u8 agg_ctrl;
|
|
|
|
/*
|
|
* For now simply disable RX aggregation
|
|
*/
|
|
agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL);
|
|
agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN;
|
|
|
|
agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH);
|
|
agg_rx &= ~RXDMA_USB_AGG_ENABLE;
|
|
agg_rx &= ~0xff0f;
|
|
|
|
rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl);
|
|
rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx);
|
|
}
|
|
|
|
static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv)
|
|
{
|
|
u32 val32;
|
|
|
|
/* Time duration for NHM unit: 4us, 0x2710=40ms */
|
|
rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710);
|
|
rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff);
|
|
rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52);
|
|
rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff);
|
|
/* TH8 */
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK);
|
|
val32 |= 0xff;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32);
|
|
/* Enable CCK */
|
|
val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B);
|
|
val32 |= BIT(8) | BIT(9) | BIT(10);
|
|
rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32);
|
|
/* Max power amongst all RX antennas */
|
|
val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC);
|
|
val32 |= BIT(7);
|
|
rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32);
|
|
}
|
|
|
|
static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct device *dev = &priv->udev->dev;
|
|
struct rtl8xxxu_rfregval *rftable;
|
|
bool macpower;
|
|
int ret;
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
|
|
/* Check if MAC is already powered on */
|
|
val8 = rtl8xxxu_read8(priv, REG_CR);
|
|
|
|
/*
|
|
* Fix 92DU-VC S3 hang with the reason is that secondary mac is not
|
|
* initialized. First MAC returns 0xea, second MAC returns 0x00
|
|
*/
|
|
if (val8 == 0xea)
|
|
macpower = false;
|
|
else
|
|
macpower = true;
|
|
|
|
ret = priv->fops->power_on(priv);
|
|
if (ret < 0) {
|
|
dev_warn(dev, "%s: Failed power on\n", __func__);
|
|
goto exit;
|
|
}
|
|
|
|
dev_dbg(dev, "%s: macpower %i\n", __func__, macpower);
|
|
if (!macpower) {
|
|
ret = priv->fops->llt_init(priv, TX_TOTAL_PAGE_NUM);
|
|
if (ret) {
|
|
dev_warn(dev, "%s: LLT table init failed\n", __func__);
|
|
goto exit;
|
|
}
|
|
|
|
/*
|
|
* Presumably this is for 8188EU as well
|
|
* Enable TX report and TX report timer
|
|
*/
|
|
if (priv->rtl_chip == RTL8723B) {
|
|
val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL);
|
|
val8 |= TX_REPORT_CTRL_TIMER_ENABLE;
|
|
rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8);
|
|
/* Set MAX RPT MACID */
|
|
rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL + 1, 0x02);
|
|
/* TX report Timer. Unit: 32us */
|
|
rtl8xxxu_write16(priv, REG_TX_REPORT_TIME, 0xcdf0);
|
|
|
|
/* tmp ps ? */
|
|
val8 = rtl8xxxu_read8(priv, 0xa3);
|
|
val8 &= 0xf8;
|
|
rtl8xxxu_write8(priv, 0xa3, val8);
|
|
}
|
|
}
|
|
|
|
ret = rtl8xxxu_download_firmware(priv);
|
|
dev_dbg(dev, "%s: download_fiwmare %i\n", __func__, ret);
|
|
if (ret)
|
|
goto exit;
|
|
ret = rtl8xxxu_start_firmware(priv);
|
|
dev_dbg(dev, "%s: start_fiwmare %i\n", __func__, ret);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Solve too many protocol error on USB bus */
|
|
/* Can't do this for 8188/8192 UMC A cut parts */
|
|
if (priv->rtl_chip == RTL8723A ||
|
|
((priv->rtl_chip == RTL8192C || priv->rtl_chip == RTL8191C ||
|
|
priv->rtl_chip == RTL8188C) &&
|
|
(priv->chip_cut || !priv->vendor_umc))) {
|
|
rtl8xxxu_write8(priv, 0xfe40, 0xe6);
|
|
rtl8xxxu_write8(priv, 0xfe41, 0x94);
|
|
rtl8xxxu_write8(priv, 0xfe42, 0x80);
|
|
|
|
rtl8xxxu_write8(priv, 0xfe40, 0xe0);
|
|
rtl8xxxu_write8(priv, 0xfe41, 0x19);
|
|
rtl8xxxu_write8(priv, 0xfe42, 0x80);
|
|
|
|
rtl8xxxu_write8(priv, 0xfe40, 0xe5);
|
|
rtl8xxxu_write8(priv, 0xfe41, 0x91);
|
|
rtl8xxxu_write8(priv, 0xfe42, 0x80);
|
|
|
|
rtl8xxxu_write8(priv, 0xfe40, 0xe2);
|
|
rtl8xxxu_write8(priv, 0xfe41, 0x81);
|
|
rtl8xxxu_write8(priv, 0xfe42, 0x80);
|
|
}
|
|
|
|
if (priv->rtl_chip == RTL8192E) {
|
|
rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
|
|
rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
|
|
}
|
|
|
|
if (priv->fops->phy_init_antenna_selection)
|
|
priv->fops->phy_init_antenna_selection(priv);
|
|
|
|
if (priv->rtl_chip == RTL8723B)
|
|
ret = rtl8xxxu_init_mac(priv, rtl8723b_mac_init_table);
|
|
else
|
|
ret = rtl8xxxu_init_mac(priv, rtl8723a_mac_init_table);
|
|
|
|
dev_dbg(dev, "%s: init_mac %i\n", __func__, ret);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = rtl8xxxu_init_phy_bb(priv);
|
|
dev_dbg(dev, "%s: init_phy_bb %i\n", __func__, ret);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
switch(priv->rtl_chip) {
|
|
case RTL8723A:
|
|
rftable = rtl8723au_radioa_1t_init_table;
|
|
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
|
|
break;
|
|
case RTL8723B:
|
|
rftable = rtl8723bu_radioa_1t_init_table;
|
|
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
|
|
/*
|
|
* PHY LCK
|
|
*/
|
|
rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01);
|
|
msleep(200);
|
|
rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0);
|
|
break;
|
|
case RTL8188C:
|
|
if (priv->hi_pa)
|
|
rftable = rtl8188ru_radioa_1t_highpa_table;
|
|
else
|
|
rftable = rtl8192cu_radioa_1t_init_table;
|
|
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
|
|
break;
|
|
case RTL8191C:
|
|
rftable = rtl8192cu_radioa_1t_init_table;
|
|
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
|
|
break;
|
|
case RTL8192C:
|
|
rftable = rtl8192cu_radioa_2t_init_table;
|
|
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_A);
|
|
if (ret)
|
|
break;
|
|
rftable = rtl8192cu_radiob_2t_init_table;
|
|
ret = rtl8xxxu_init_phy_rf(priv, rftable, RF_B);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/*
|
|
* Chip specific quirks
|
|
*/
|
|
if (priv->rtl_chip == RTL8723A) {
|
|
/* Fix USB interface interference issue */
|
|
rtl8xxxu_write8(priv, 0xfe40, 0xe0);
|
|
rtl8xxxu_write8(priv, 0xfe41, 0x8d);
|
|
rtl8xxxu_write8(priv, 0xfe42, 0x80);
|
|
rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, 0xfd0320);
|
|
|
|
/* Reduce 80M spur */
|
|
rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x0381808d);
|
|
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
|
|
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff82);
|
|
rtl8xxxu_write32(priv, REG_AFE_PLL_CTRL, 0xf0ffff83);
|
|
} else {
|
|
val32 = rtl8xxxu_read32(priv, REG_TXDMA_OFFSET_CHK);
|
|
val32 |= TXDMA_OFFSET_DROP_DATA_EN;
|
|
rtl8xxxu_write32(priv, REG_TXDMA_OFFSET_CHK, val32);
|
|
}
|
|
|
|
if (!macpower) {
|
|
if (priv->ep_tx_normal_queue)
|
|
val8 = TX_PAGE_NUM_NORM_PQ;
|
|
else
|
|
val8 = 0;
|
|
|
|
rtl8xxxu_write8(priv, REG_RQPN_NPQ, val8);
|
|
|
|
val32 = (TX_PAGE_NUM_PUBQ << RQPN_NORM_PQ_SHIFT) | RQPN_LOAD;
|
|
|
|
if (priv->ep_tx_high_queue)
|
|
val32 |= (TX_PAGE_NUM_HI_PQ << RQPN_HI_PQ_SHIFT);
|
|
if (priv->ep_tx_low_queue)
|
|
val32 |= (TX_PAGE_NUM_LO_PQ << RQPN_LO_PQ_SHIFT);
|
|
|
|
rtl8xxxu_write32(priv, REG_RQPN, val32);
|
|
|
|
/*
|
|
* Set TX buffer boundary
|
|
*/
|
|
val8 = TX_TOTAL_PAGE_NUM + 1;
|
|
|
|
if (priv->rtl_chip == RTL8723B)
|
|
val8 -= 1;
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPKTBUF_BCNQ_BDNY, val8);
|
|
rtl8xxxu_write8(priv, REG_TXPKTBUF_MGQ_BDNY, val8);
|
|
rtl8xxxu_write8(priv, REG_TXPKTBUF_WMAC_LBK_BF_HD, val8);
|
|
rtl8xxxu_write8(priv, REG_TRXFF_BNDY, val8);
|
|
rtl8xxxu_write8(priv, REG_TDECTRL + 1, val8);
|
|
}
|
|
|
|
ret = rtl8xxxu_init_queue_priority(priv);
|
|
dev_dbg(dev, "%s: init_queue_priority %i\n", __func__, ret);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* RFSW Control - clear bit 14 ?? */
|
|
if (priv->rtl_chip != RTL8723B)
|
|
rtl8xxxu_write32(priv, REG_FPGA0_TX_INFO, 0x00000003);
|
|
/* 0x07000760 */
|
|
val32 = FPGA0_RF_TRSW | FPGA0_RF_TRSWB | FPGA0_RF_ANTSW |
|
|
FPGA0_RF_ANTSWB | FPGA0_RF_PAPE |
|
|
((FPGA0_RF_ANTSW | FPGA0_RF_ANTSWB | FPGA0_RF_PAPE) <<
|
|
FPGA0_RF_BD_CTRL_SHIFT);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XAB_RF_SW_CTRL, val32);
|
|
/* 0x860[6:5]= 00 - why? - this sets antenna B */
|
|
rtl8xxxu_write32(priv, REG_FPGA0_XA_RF_INT_OE, 0x66F60210);
|
|
|
|
priv->rf_mode_ag[0] = rtl8xxxu_read_rfreg(priv, RF_A,
|
|
RF6052_REG_MODE_AG);
|
|
|
|
/*
|
|
* Set RX page boundary
|
|
*/
|
|
if (priv->rtl_chip == RTL8723B)
|
|
rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x3f7f);
|
|
else
|
|
rtl8xxxu_write16(priv, REG_TRXFF_BNDY + 2, 0x27ff);
|
|
/*
|
|
* Transfer page size is always 128
|
|
*/
|
|
if (priv->rtl_chip == RTL8723B)
|
|
val8 = (PBP_PAGE_SIZE_256 << PBP_PAGE_SIZE_RX_SHIFT) |
|
|
(PBP_PAGE_SIZE_256 << PBP_PAGE_SIZE_TX_SHIFT);
|
|
else
|
|
val8 = (PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_RX_SHIFT) |
|
|
(PBP_PAGE_SIZE_128 << PBP_PAGE_SIZE_TX_SHIFT);
|
|
rtl8xxxu_write8(priv, REG_PBP, val8);
|
|
|
|
/*
|
|
* Unit in 8 bytes, not obvious what it is used for
|
|
*/
|
|
rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4);
|
|
|
|
/*
|
|
* Enable all interrupts - not obvious USB needs to do this
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_HISR, 0xffffffff);
|
|
rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff);
|
|
|
|
rtl8xxxu_set_mac(priv);
|
|
rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION);
|
|
|
|
/*
|
|
* Configure initial WMAC settings
|
|
*/
|
|
val32 = RCR_ACCEPT_PHYS_MATCH | RCR_ACCEPT_MCAST | RCR_ACCEPT_BCAST |
|
|
RCR_ACCEPT_MGMT_FRAME | RCR_HTC_LOC_CTRL |
|
|
RCR_APPEND_PHYSTAT | RCR_APPEND_ICV | RCR_APPEND_MIC;
|
|
rtl8xxxu_write32(priv, REG_RCR, val32);
|
|
|
|
/*
|
|
* Accept all multicast
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_MAR, 0xffffffff);
|
|
rtl8xxxu_write32(priv, REG_MAR + 4, 0xffffffff);
|
|
|
|
/*
|
|
* Init adaptive controls
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
|
|
val32 &= ~RESPONSE_RATE_BITMAP_ALL;
|
|
val32 |= RESPONSE_RATE_RRSR_CCK_ONLY_1M;
|
|
rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
|
|
|
|
/* CCK = 0x0a, OFDM = 0x10 */
|
|
rtl8xxxu_set_spec_sifs(priv, 0x10, 0x10);
|
|
rtl8xxxu_set_retry(priv, 0x30, 0x30);
|
|
rtl8xxxu_set_spec_sifs(priv, 0x0a, 0x10);
|
|
|
|
/*
|
|
* Init EDCA
|
|
*/
|
|
rtl8xxxu_write16(priv, REG_MAC_SPEC_SIFS, 0x100a);
|
|
|
|
/* Set CCK SIFS */
|
|
rtl8xxxu_write16(priv, REG_SIFS_CCK, 0x100a);
|
|
|
|
/* Set OFDM SIFS */
|
|
rtl8xxxu_write16(priv, REG_SIFS_OFDM, 0x100a);
|
|
|
|
/* TXOP */
|
|
rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, 0x005ea42b);
|
|
rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, 0x0000a44f);
|
|
rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, 0x005ea324);
|
|
rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, 0x002fa226);
|
|
|
|
/* Set data auto rate fallback retry count */
|
|
rtl8xxxu_write32(priv, REG_DARFRC, 0x00000000);
|
|
rtl8xxxu_write32(priv, REG_DARFRC + 4, 0x10080404);
|
|
rtl8xxxu_write32(priv, REG_RARFRC, 0x04030201);
|
|
rtl8xxxu_write32(priv, REG_RARFRC + 4, 0x08070605);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_FWHW_TXQ_CTRL);
|
|
val8 |= FWHW_TXQ_CTRL_AMPDU_RETRY;
|
|
rtl8xxxu_write8(priv, REG_FWHW_TXQ_CTRL, val8);
|
|
|
|
/* Set ACK timeout */
|
|
rtl8xxxu_write8(priv, REG_ACKTO, 0x40);
|
|
|
|
/*
|
|
* Initialize beacon parameters
|
|
*/
|
|
val16 = BEACON_DISABLE_TSF_UPDATE | (BEACON_DISABLE_TSF_UPDATE << 8);
|
|
rtl8xxxu_write16(priv, REG_BEACON_CTRL, val16);
|
|
rtl8xxxu_write16(priv, REG_TBTT_PROHIBIT, 0x6404);
|
|
rtl8xxxu_write8(priv, REG_DRIVER_EARLY_INT, DRIVER_EARLY_INT_TIME);
|
|
rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME);
|
|
rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
|
|
|
|
/*
|
|
* Initialize burst parameters
|
|
*/
|
|
if (priv->rtl_chip == RTL8723B) {
|
|
/*
|
|
* For USB high speed set 512B packets
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
|
|
val8 &= ~(BIT(4) | BIT(5));
|
|
val8 |= BIT(4);
|
|
val8 |= BIT(1) | BIT(2) | BIT(3);
|
|
rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8);
|
|
|
|
/*
|
|
* For USB high speed set 512B packets
|
|
*/
|
|
val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B);
|
|
val8 |= BIT(7);
|
|
rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8);
|
|
|
|
rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14);
|
|
rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e);
|
|
rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff);
|
|
rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18);
|
|
rtl8xxxu_write8(priv, REG_PIFS, 0x00);
|
|
rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50);
|
|
rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
|
|
val8 |= BIT(5) | BIT(6);
|
|
rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
|
|
}
|
|
|
|
if (priv->fops->init_aggregation)
|
|
priv->fops->init_aggregation(priv);
|
|
|
|
/*
|
|
* Enable CCK and OFDM block
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
val32 |= (FPGA_RF_MODE_CCK | FPGA_RF_MODE_OFDM);
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
|
|
/*
|
|
* Invalidate all CAM entries - bit 30 is undocumented
|
|
*/
|
|
rtl8xxxu_write32(priv, REG_CAM_CMD, CAM_CMD_POLLING | BIT(30));
|
|
|
|
/*
|
|
* Start out with default power levels for channel 6, 20MHz
|
|
*/
|
|
priv->fops->set_tx_power(priv, 1, false);
|
|
|
|
/* Let the 8051 take control of antenna setting */
|
|
val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
|
|
val8 |= LEDCFG2_DPDT_SELECT;
|
|
rtl8xxxu_write8(priv, REG_LEDCFG2, val8);
|
|
|
|
rtl8xxxu_write8(priv, REG_HWSEQ_CTRL, 0xff);
|
|
|
|
/* Disable BAR - not sure if this has any effect on USB */
|
|
rtl8xxxu_write32(priv, REG_BAR_MODE_CTRL, 0x0201ffff);
|
|
|
|
rtl8xxxu_write16(priv, REG_FAST_EDCA_CTRL, 0);
|
|
|
|
if (priv->fops->init_statistics)
|
|
priv->fops->init_statistics(priv);
|
|
|
|
rtl8723a_phy_lc_calibrate(priv);
|
|
|
|
priv->fops->phy_iq_calibrate(priv);
|
|
|
|
/*
|
|
* This should enable thermal meter
|
|
*/
|
|
if (priv->fops->has_s0s1)
|
|
rtl8xxxu_write_rfreg(priv,
|
|
RF_A, RF6052_REG_T_METER_8723B, 0x37cf8);
|
|
else
|
|
rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_T_METER, 0x60);
|
|
|
|
/* Set NAV_UPPER to 30000us */
|
|
val8 = ((30000 + NAV_UPPER_UNIT - 1) / NAV_UPPER_UNIT);
|
|
rtl8xxxu_write8(priv, REG_NAV_UPPER, val8);
|
|
|
|
if (priv->rtl_chip == RTL8723A) {
|
|
/*
|
|
* 2011/03/09 MH debug only, UMC-B cut pass 2500 S5 test,
|
|
* but we need to find root cause.
|
|
* This is 8723au only.
|
|
*/
|
|
val32 = rtl8xxxu_read32(priv, REG_FPGA0_RF_MODE);
|
|
if ((val32 & 0xff000000) != 0x83000000) {
|
|
val32 |= FPGA_RF_MODE_CCK;
|
|
rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32);
|
|
}
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL);
|
|
val32 |= FWHW_TXQ_CTRL_XMIT_MGMT_ACK;
|
|
/* ack for xmit mgmt frames. */
|
|
rtl8xxxu_write32(priv, REG_FWHW_TXQ_CTRL, val32);
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_disable_device(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
|
|
priv->fops->power_off(priv);
|
|
}
|
|
|
|
static void rtl8xxxu_cam_write(struct rtl8xxxu_priv *priv,
|
|
struct ieee80211_key_conf *key, const u8 *mac)
|
|
{
|
|
u32 cmd, val32, addr, ctrl;
|
|
int j, i, tmp_debug;
|
|
|
|
tmp_debug = rtl8xxxu_debug;
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_KEY)
|
|
rtl8xxxu_debug |= RTL8XXXU_DEBUG_REG_WRITE;
|
|
|
|
/*
|
|
* This is a bit of a hack - the lower bits of the cipher
|
|
* suite selector happens to match the cipher index in the CAM
|
|
*/
|
|
addr = key->keyidx << CAM_CMD_KEY_SHIFT;
|
|
ctrl = (key->cipher & 0x0f) << 2 | key->keyidx | CAM_WRITE_VALID;
|
|
|
|
for (j = 5; j >= 0; j--) {
|
|
switch (j) {
|
|
case 0:
|
|
val32 = ctrl | (mac[0] << 16) | (mac[1] << 24);
|
|
break;
|
|
case 1:
|
|
val32 = mac[2] | (mac[3] << 8) |
|
|
(mac[4] << 16) | (mac[5] << 24);
|
|
break;
|
|
default:
|
|
i = (j - 2) << 2;
|
|
val32 = key->key[i] | (key->key[i + 1] << 8) |
|
|
key->key[i + 2] << 16 | key->key[i + 3] << 24;
|
|
break;
|
|
}
|
|
|
|
rtl8xxxu_write32(priv, REG_CAM_WRITE, val32);
|
|
cmd = CAM_CMD_POLLING | CAM_CMD_WRITE | (addr + j);
|
|
rtl8xxxu_write32(priv, REG_CAM_CMD, cmd);
|
|
udelay(100);
|
|
}
|
|
|
|
rtl8xxxu_debug = tmp_debug;
|
|
}
|
|
|
|
static void rtl8xxxu_sw_scan_start(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif, const u8 *mac)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
u8 val8;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
|
|
val8 |= BEACON_DISABLE_TSF_UPDATE;
|
|
rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
|
|
}
|
|
|
|
static void rtl8xxxu_sw_scan_complete(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
u8 val8;
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
|
|
val8 &= ~BEACON_DISABLE_TSF_UPDATE;
|
|
rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
|
|
}
|
|
|
|
static void rtl8723au_update_rate_mask(struct rtl8xxxu_priv *priv,
|
|
u32 ramask, int sgi)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
|
|
h2c.ramask.cmd = H2C_SET_RATE_MASK;
|
|
h2c.ramask.mask_lo = cpu_to_le16(ramask & 0xffff);
|
|
h2c.ramask.mask_hi = cpu_to_le16(ramask >> 16);
|
|
|
|
h2c.ramask.arg = 0x80;
|
|
if (sgi)
|
|
h2c.ramask.arg |= 0x20;
|
|
|
|
dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n",
|
|
__func__, ramask, h2c.ramask.arg, sizeof(h2c.ramask));
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.ramask));
|
|
}
|
|
|
|
static void rtl8723bu_update_rate_mask(struct rtl8xxxu_priv *priv,
|
|
u32 ramask, int sgi)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
u8 bw = 0;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
|
|
h2c.b_macid_cfg.cmd = H2C_8723B_MACID_CFG_RAID;
|
|
h2c.b_macid_cfg.ramask0 = ramask & 0xff;
|
|
h2c.b_macid_cfg.ramask1 = (ramask >> 8) & 0xff;
|
|
h2c.b_macid_cfg.ramask2 = (ramask >> 16) & 0xff;
|
|
h2c.b_macid_cfg.ramask3 = (ramask >> 24) & 0xff;
|
|
|
|
h2c.ramask.arg = 0x80;
|
|
h2c.b_macid_cfg.data1 = 0;
|
|
if (sgi)
|
|
h2c.b_macid_cfg.data1 |= BIT(7);
|
|
|
|
h2c.b_macid_cfg.data2 = bw;
|
|
|
|
dev_dbg(&priv->udev->dev, "%s: rate mask %08x, arg %02x, size %zi\n",
|
|
__func__, ramask, h2c.ramask.arg, sizeof(h2c.b_macid_cfg));
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.b_macid_cfg));
|
|
}
|
|
|
|
static void rtl8723au_report_connect(struct rtl8xxxu_priv *priv,
|
|
u8 macid, bool connect)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
|
|
h2c.joinbss.cmd = H2C_JOIN_BSS_REPORT;
|
|
|
|
if (connect)
|
|
h2c.joinbss.data = H2C_JOIN_BSS_CONNECT;
|
|
else
|
|
h2c.joinbss.data = H2C_JOIN_BSS_DISCONNECT;
|
|
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.joinbss));
|
|
}
|
|
|
|
static void rtl8723bu_report_connect(struct rtl8xxxu_priv *priv,
|
|
u8 macid, bool connect)
|
|
{
|
|
struct h2c_cmd h2c;
|
|
|
|
memset(&h2c, 0, sizeof(struct h2c_cmd));
|
|
|
|
h2c.media_status_rpt.cmd = H2C_8723B_MEDIA_STATUS_RPT;
|
|
if (connect)
|
|
h2c.media_status_rpt.parm |= BIT(0);
|
|
else
|
|
h2c.media_status_rpt.parm &= ~BIT(0);
|
|
|
|
rtl8723a_h2c_cmd(priv, &h2c, sizeof(h2c.media_status_rpt));
|
|
}
|
|
|
|
static void rtl8xxxu_set_basic_rates(struct rtl8xxxu_priv *priv, u32 rate_cfg)
|
|
{
|
|
u32 val32;
|
|
u8 rate_idx = 0;
|
|
|
|
rate_cfg &= RESPONSE_RATE_BITMAP_ALL;
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
|
|
val32 &= ~RESPONSE_RATE_BITMAP_ALL;
|
|
val32 |= rate_cfg;
|
|
rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
|
|
|
|
dev_dbg(&priv->udev->dev, "%s: rates %08x\n", __func__, rate_cfg);
|
|
|
|
while (rate_cfg) {
|
|
rate_cfg = (rate_cfg >> 1);
|
|
rate_idx++;
|
|
}
|
|
rtl8xxxu_write8(priv, REG_INIRTS_RATE_SEL, rate_idx);
|
|
}
|
|
|
|
static void
|
|
rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
struct ieee80211_bss_conf *bss_conf, u32 changed)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct device *dev = &priv->udev->dev;
|
|
struct ieee80211_sta *sta;
|
|
u32 val32;
|
|
u8 val8;
|
|
|
|
if (changed & BSS_CHANGED_ASSOC) {
|
|
dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc);
|
|
|
|
rtl8xxxu_set_linktype(priv, vif->type);
|
|
|
|
if (bss_conf->assoc) {
|
|
u32 ramask;
|
|
int sgi = 0;
|
|
|
|
rcu_read_lock();
|
|
sta = ieee80211_find_sta(vif, bss_conf->bssid);
|
|
if (!sta) {
|
|
dev_info(dev, "%s: ASSOC no sta found\n",
|
|
__func__);
|
|
rcu_read_unlock();
|
|
goto error;
|
|
}
|
|
|
|
if (sta->ht_cap.ht_supported)
|
|
dev_info(dev, "%s: HT supported\n", __func__);
|
|
if (sta->vht_cap.vht_supported)
|
|
dev_info(dev, "%s: VHT supported\n", __func__);
|
|
|
|
/* TODO: Set bits 28-31 for rate adaptive id */
|
|
ramask = (sta->supp_rates[0] & 0xfff) |
|
|
sta->ht_cap.mcs.rx_mask[0] << 12 |
|
|
sta->ht_cap.mcs.rx_mask[1] << 20;
|
|
if (sta->ht_cap.cap &
|
|
(IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))
|
|
sgi = 1;
|
|
rcu_read_unlock();
|
|
|
|
priv->fops->update_rate_mask(priv, ramask, sgi);
|
|
|
|
rtl8xxxu_write8(priv, REG_BCN_MAX_ERR, 0xff);
|
|
|
|
rtl8723a_stop_tx_beacon(priv);
|
|
|
|
/* joinbss sequence */
|
|
rtl8xxxu_write16(priv, REG_BCN_PSR_RPT,
|
|
0xc000 | bss_conf->aid);
|
|
|
|
priv->fops->report_connect(priv, 0, true);
|
|
} else {
|
|
val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
|
|
val8 |= BEACON_DISABLE_TSF_UPDATE;
|
|
rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
|
|
|
|
priv->fops->report_connect(priv, 0, false);
|
|
}
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
|
|
dev_dbg(dev, "Changed ERP_PREAMBLE: Use short preamble %i\n",
|
|
bss_conf->use_short_preamble);
|
|
val32 = rtl8xxxu_read32(priv, REG_RESPONSE_RATE_SET);
|
|
if (bss_conf->use_short_preamble)
|
|
val32 |= RSR_ACK_SHORT_PREAMBLE;
|
|
else
|
|
val32 &= ~RSR_ACK_SHORT_PREAMBLE;
|
|
rtl8xxxu_write32(priv, REG_RESPONSE_RATE_SET, val32);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_ERP_SLOT) {
|
|
dev_dbg(dev, "Changed ERP_SLOT: short_slot_time %i\n",
|
|
bss_conf->use_short_slot);
|
|
|
|
if (bss_conf->use_short_slot)
|
|
val8 = 9;
|
|
else
|
|
val8 = 20;
|
|
rtl8xxxu_write8(priv, REG_SLOT, val8);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BSSID) {
|
|
dev_dbg(dev, "Changed BSSID!\n");
|
|
rtl8xxxu_set_bssid(priv, bss_conf->bssid);
|
|
}
|
|
|
|
if (changed & BSS_CHANGED_BASIC_RATES) {
|
|
dev_dbg(dev, "Changed BASIC_RATES!\n");
|
|
rtl8xxxu_set_basic_rates(priv, bss_conf->basic_rates);
|
|
}
|
|
error:
|
|
return;
|
|
}
|
|
|
|
static u32 rtl8xxxu_80211_to_rtl_queue(u32 queue)
|
|
{
|
|
u32 rtlqueue;
|
|
|
|
switch (queue) {
|
|
case IEEE80211_AC_VO:
|
|
rtlqueue = TXDESC_QUEUE_VO;
|
|
break;
|
|
case IEEE80211_AC_VI:
|
|
rtlqueue = TXDESC_QUEUE_VI;
|
|
break;
|
|
case IEEE80211_AC_BE:
|
|
rtlqueue = TXDESC_QUEUE_BE;
|
|
break;
|
|
case IEEE80211_AC_BK:
|
|
rtlqueue = TXDESC_QUEUE_BK;
|
|
break;
|
|
default:
|
|
rtlqueue = TXDESC_QUEUE_BE;
|
|
}
|
|
|
|
return rtlqueue;
|
|
}
|
|
|
|
static u32 rtl8xxxu_queue_select(struct ieee80211_hw *hw, struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
u32 queue;
|
|
|
|
if (ieee80211_is_mgmt(hdr->frame_control))
|
|
queue = TXDESC_QUEUE_MGNT;
|
|
else
|
|
queue = rtl8xxxu_80211_to_rtl_queue(skb_get_queue_mapping(skb));
|
|
|
|
return queue;
|
|
}
|
|
|
|
/*
|
|
* Despite newer chips 8723b/8812/8821 having a larger TX descriptor
|
|
* format. The descriptor checksum is still only calculated over the
|
|
* initial 32 bytes of the descriptor!
|
|
*/
|
|
static void rtl8xxxu_calc_tx_desc_csum(struct rtl8xxxu_txdesc32 *tx_desc)
|
|
{
|
|
__le16 *ptr = (__le16 *)tx_desc;
|
|
u16 csum = 0;
|
|
int i;
|
|
|
|
/*
|
|
* Clear csum field before calculation, as the csum field is
|
|
* in the middle of the struct.
|
|
*/
|
|
tx_desc->csum = cpu_to_le16(0);
|
|
|
|
for (i = 0; i < (sizeof(struct rtl8xxxu_txdesc32) / sizeof(u16)); i++)
|
|
csum = csum ^ le16_to_cpu(ptr[i]);
|
|
|
|
tx_desc->csum |= cpu_to_le16(csum);
|
|
}
|
|
|
|
static void rtl8xxxu_free_tx_resources(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8xxxu_tx_urb *tx_urb, *tmp;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->tx_urb_lock, flags);
|
|
list_for_each_entry_safe(tx_urb, tmp, &priv->tx_urb_free_list, list) {
|
|
list_del(&tx_urb->list);
|
|
priv->tx_urb_free_count--;
|
|
usb_free_urb(&tx_urb->urb);
|
|
}
|
|
spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
|
|
}
|
|
|
|
static struct rtl8xxxu_tx_urb *
|
|
rtl8xxxu_alloc_tx_urb(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8xxxu_tx_urb *tx_urb;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->tx_urb_lock, flags);
|
|
tx_urb = list_first_entry_or_null(&priv->tx_urb_free_list,
|
|
struct rtl8xxxu_tx_urb, list);
|
|
if (tx_urb) {
|
|
list_del(&tx_urb->list);
|
|
priv->tx_urb_free_count--;
|
|
if (priv->tx_urb_free_count < RTL8XXXU_TX_URB_LOW_WATER &&
|
|
!priv->tx_stopped) {
|
|
priv->tx_stopped = true;
|
|
ieee80211_stop_queues(priv->hw);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
|
|
|
|
return tx_urb;
|
|
}
|
|
|
|
static void rtl8xxxu_free_tx_urb(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_tx_urb *tx_urb)
|
|
{
|
|
unsigned long flags;
|
|
|
|
INIT_LIST_HEAD(&tx_urb->list);
|
|
|
|
spin_lock_irqsave(&priv->tx_urb_lock, flags);
|
|
|
|
list_add(&tx_urb->list, &priv->tx_urb_free_list);
|
|
priv->tx_urb_free_count++;
|
|
if (priv->tx_urb_free_count > RTL8XXXU_TX_URB_HIGH_WATER &&
|
|
priv->tx_stopped) {
|
|
priv->tx_stopped = false;
|
|
ieee80211_wake_queues(priv->hw);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->tx_urb_lock, flags);
|
|
}
|
|
|
|
static void rtl8xxxu_tx_complete(struct urb *urb)
|
|
{
|
|
struct sk_buff *skb = (struct sk_buff *)urb->context;
|
|
struct ieee80211_tx_info *tx_info;
|
|
struct ieee80211_hw *hw;
|
|
struct rtl8xxxu_priv *priv;
|
|
struct rtl8xxxu_tx_urb *tx_urb =
|
|
container_of(urb, struct rtl8xxxu_tx_urb, urb);
|
|
|
|
tx_info = IEEE80211_SKB_CB(skb);
|
|
hw = tx_info->rate_driver_data[0];
|
|
priv = hw->priv;
|
|
|
|
skb_pull(skb, priv->fops->tx_desc_size);
|
|
|
|
ieee80211_tx_info_clear_status(tx_info);
|
|
tx_info->status.rates[0].idx = -1;
|
|
tx_info->status.rates[0].count = 0;
|
|
|
|
if (!urb->status)
|
|
tx_info->flags |= IEEE80211_TX_STAT_ACK;
|
|
|
|
ieee80211_tx_status_irqsafe(hw, skb);
|
|
|
|
rtl8xxxu_free_tx_urb(priv, tx_urb);
|
|
}
|
|
|
|
static void rtl8xxxu_dump_action(struct device *dev,
|
|
struct ieee80211_hdr *hdr)
|
|
{
|
|
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)hdr;
|
|
u16 cap, timeout;
|
|
|
|
if (!(rtl8xxxu_debug & RTL8XXXU_DEBUG_ACTION))
|
|
return;
|
|
|
|
switch (mgmt->u.action.u.addba_resp.action_code) {
|
|
case WLAN_ACTION_ADDBA_RESP:
|
|
cap = le16_to_cpu(mgmt->u.action.u.addba_resp.capab);
|
|
timeout = le16_to_cpu(mgmt->u.action.u.addba_resp.timeout);
|
|
dev_info(dev, "WLAN_ACTION_ADDBA_RESP: "
|
|
"timeout %i, tid %02x, buf_size %02x, policy %02x, "
|
|
"status %02x\n",
|
|
timeout,
|
|
(cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2,
|
|
(cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6,
|
|
(cap >> 1) & 0x1,
|
|
le16_to_cpu(mgmt->u.action.u.addba_resp.status));
|
|
break;
|
|
case WLAN_ACTION_ADDBA_REQ:
|
|
cap = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
|
|
timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
|
|
dev_info(dev, "WLAN_ACTION_ADDBA_REQ: "
|
|
"timeout %i, tid %02x, buf_size %02x, policy %02x\n",
|
|
timeout,
|
|
(cap & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2,
|
|
(cap & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6,
|
|
(cap >> 1) & 0x1);
|
|
break;
|
|
default:
|
|
dev_info(dev, "action frame %02x\n",
|
|
mgmt->u.action.u.addba_resp.action_code);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void rtl8xxxu_tx(struct ieee80211_hw *hw,
|
|
struct ieee80211_tx_control *control,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
|
|
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
|
|
struct ieee80211_rate *tx_rate = ieee80211_get_tx_rate(hw, tx_info);
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct rtl8xxxu_txdesc32 *tx_desc;
|
|
struct rtl8xxxu_txdesc40 *tx_desc40;
|
|
struct rtl8xxxu_tx_urb *tx_urb;
|
|
struct ieee80211_sta *sta = NULL;
|
|
struct ieee80211_vif *vif = tx_info->control.vif;
|
|
struct device *dev = &priv->udev->dev;
|
|
u32 queue, rate;
|
|
u16 pktlen = skb->len;
|
|
u16 seq_number;
|
|
u16 rate_flag = tx_info->control.rates[0].flags;
|
|
int tx_desc_size = priv->fops->tx_desc_size;
|
|
int ret;
|
|
bool usedesc40, ampdu_enable;
|
|
|
|
if (skb_headroom(skb) < tx_desc_size) {
|
|
dev_warn(dev,
|
|
"%s: Not enough headroom (%i) for tx descriptor\n",
|
|
__func__, skb_headroom(skb));
|
|
goto error;
|
|
}
|
|
|
|
if (unlikely(skb->len > (65535 - tx_desc_size))) {
|
|
dev_warn(dev, "%s: Trying to send over-sized skb (%i)\n",
|
|
__func__, skb->len);
|
|
goto error;
|
|
}
|
|
|
|
tx_urb = rtl8xxxu_alloc_tx_urb(priv);
|
|
if (!tx_urb) {
|
|
dev_warn(dev, "%s: Unable to allocate tx urb\n", __func__);
|
|
goto error;
|
|
}
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_TX)
|
|
dev_info(dev, "%s: TX rate: %d (%d), pkt size %d\n",
|
|
__func__, tx_rate->bitrate, tx_rate->hw_value, pktlen);
|
|
|
|
if (ieee80211_is_action(hdr->frame_control))
|
|
rtl8xxxu_dump_action(dev, hdr);
|
|
|
|
usedesc40 = (tx_desc_size == 40);
|
|
tx_info->rate_driver_data[0] = hw;
|
|
|
|
if (control && control->sta)
|
|
sta = control->sta;
|
|
|
|
tx_desc = (struct rtl8xxxu_txdesc32 *)skb_push(skb, tx_desc_size);
|
|
|
|
memset(tx_desc, 0, tx_desc_size);
|
|
tx_desc->pkt_size = cpu_to_le16(pktlen);
|
|
tx_desc->pkt_offset = tx_desc_size;
|
|
|
|
tx_desc->txdw0 =
|
|
TXDESC_OWN | TXDESC_FIRST_SEGMENT | TXDESC_LAST_SEGMENT;
|
|
if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) ||
|
|
is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
|
|
tx_desc->txdw0 |= TXDESC_BROADMULTICAST;
|
|
|
|
queue = rtl8xxxu_queue_select(hw, skb);
|
|
tx_desc->txdw1 = cpu_to_le32(queue << TXDESC_QUEUE_SHIFT);
|
|
|
|
if (tx_info->control.hw_key) {
|
|
switch (tx_info->control.hw_key->cipher) {
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_RC4);
|
|
break;
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
tx_desc->txdw1 |= cpu_to_le32(TXDESC_SEC_AES);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* (tx_info->flags & IEEE80211_TX_CTL_AMPDU) && */
|
|
ampdu_enable = false;
|
|
if (ieee80211_is_data_qos(hdr->frame_control) && sta) {
|
|
if (sta->ht_cap.ht_supported) {
|
|
u32 ampdu, val32;
|
|
|
|
ampdu = (u32)sta->ht_cap.ampdu_density;
|
|
val32 = ampdu << TXDESC_AMPDU_DENSITY_SHIFT;
|
|
tx_desc->txdw2 |= cpu_to_le32(val32);
|
|
|
|
ampdu_enable = true;
|
|
}
|
|
}
|
|
|
|
if (rate_flag & IEEE80211_TX_RC_MCS)
|
|
rate = tx_info->control.rates[0].idx + DESC_RATE_MCS0;
|
|
else
|
|
rate = tx_rate->hw_value;
|
|
|
|
seq_number = IEEE80211_SEQ_TO_SN(le16_to_cpu(hdr->seq_ctrl));
|
|
if (!usedesc40) {
|
|
tx_desc->txdw5 = cpu_to_le32(rate);
|
|
|
|
if (ieee80211_is_data(hdr->frame_control))
|
|
tx_desc->txdw5 |= cpu_to_le32(0x0001ff00);
|
|
|
|
tx_desc->txdw3 =
|
|
cpu_to_le32((u32)seq_number << TXDESC32_SEQ_SHIFT);
|
|
|
|
if (ampdu_enable)
|
|
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_ENABLE);
|
|
else
|
|
tx_desc->txdw1 |= cpu_to_le32(TXDESC32_AGG_BREAK);
|
|
|
|
if (ieee80211_is_mgmt(hdr->frame_control)) {
|
|
tx_desc->txdw5 = cpu_to_le32(tx_rate->hw_value);
|
|
tx_desc->txdw4 |=
|
|
cpu_to_le32(TXDESC32_USE_DRIVER_RATE);
|
|
tx_desc->txdw5 |=
|
|
cpu_to_le32(6 << TXDESC32_RETRY_LIMIT_SHIFT);
|
|
tx_desc->txdw5 |=
|
|
cpu_to_le32(TXDESC32_RETRY_LIMIT_ENABLE);
|
|
}
|
|
|
|
if (ieee80211_is_data_qos(hdr->frame_control))
|
|
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_QOS);
|
|
|
|
if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
|
|
(sta && vif && vif->bss_conf.use_short_preamble))
|
|
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_SHORT_PREAMBLE);
|
|
|
|
if (rate_flag & IEEE80211_TX_RC_SHORT_GI ||
|
|
(ieee80211_is_data_qos(hdr->frame_control) &&
|
|
sta && sta->ht_cap.cap &
|
|
(IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SGI_20))) {
|
|
tx_desc->txdw5 |= cpu_to_le32(TXDESC32_SHORT_GI);
|
|
}
|
|
|
|
if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
|
|
/*
|
|
* Use RTS rate 24M - does the mac80211 tell
|
|
* us which to use?
|
|
*/
|
|
tx_desc->txdw4 |=
|
|
cpu_to_le32(DESC_RATE_24M <<
|
|
TXDESC32_RTS_RATE_SHIFT);
|
|
tx_desc->txdw4 |=
|
|
cpu_to_le32(TXDESC32_RTS_CTS_ENABLE);
|
|
tx_desc->txdw4 |= cpu_to_le32(TXDESC32_HW_RTS_ENABLE);
|
|
}
|
|
} else {
|
|
tx_desc40 = (struct rtl8xxxu_txdesc40 *)tx_desc;
|
|
|
|
tx_desc40->txdw4 = cpu_to_le32(rate);
|
|
if (ieee80211_is_data(hdr->frame_control)) {
|
|
tx_desc->txdw4 |=
|
|
cpu_to_le32(0x1f <<
|
|
TXDESC40_DATA_RATE_FB_SHIFT);
|
|
}
|
|
|
|
tx_desc40->txdw9 =
|
|
cpu_to_le32((u32)seq_number << TXDESC40_SEQ_SHIFT);
|
|
|
|
if (ampdu_enable)
|
|
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_ENABLE);
|
|
else
|
|
tx_desc40->txdw2 |= cpu_to_le32(TXDESC40_AGG_BREAK);
|
|
|
|
if (ieee80211_is_mgmt(hdr->frame_control)) {
|
|
tx_desc40->txdw4 = cpu_to_le32(tx_rate->hw_value);
|
|
tx_desc40->txdw3 |=
|
|
cpu_to_le32(TXDESC40_USE_DRIVER_RATE);
|
|
tx_desc40->txdw4 |=
|
|
cpu_to_le32(6 << TXDESC40_RETRY_LIMIT_SHIFT);
|
|
tx_desc40->txdw4 |=
|
|
cpu_to_le32(TXDESC40_RETRY_LIMIT_ENABLE);
|
|
}
|
|
|
|
if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE ||
|
|
(sta && vif && vif->bss_conf.use_short_preamble))
|
|
tx_desc40->txdw5 |=
|
|
cpu_to_le32(TXDESC40_SHORT_PREAMBLE);
|
|
|
|
if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
|
|
/*
|
|
* Use RTS rate 24M - does the mac80211 tell
|
|
* us which to use?
|
|
*/
|
|
tx_desc->txdw4 |=
|
|
cpu_to_le32(DESC_RATE_24M <<
|
|
TXDESC40_RTS_RATE_SHIFT);
|
|
tx_desc->txdw3 |= cpu_to_le32(TXDESC40_RTS_CTS_ENABLE);
|
|
tx_desc->txdw3 |= cpu_to_le32(TXDESC40_HW_RTS_ENABLE);
|
|
}
|
|
}
|
|
|
|
rtl8xxxu_calc_tx_desc_csum(tx_desc);
|
|
|
|
usb_fill_bulk_urb(&tx_urb->urb, priv->udev, priv->pipe_out[queue],
|
|
skb->data, skb->len, rtl8xxxu_tx_complete, skb);
|
|
|
|
usb_anchor_urb(&tx_urb->urb, &priv->tx_anchor);
|
|
ret = usb_submit_urb(&tx_urb->urb, GFP_ATOMIC);
|
|
if (ret) {
|
|
usb_unanchor_urb(&tx_urb->urb);
|
|
rtl8xxxu_free_tx_urb(priv, tx_urb);
|
|
goto error;
|
|
}
|
|
return;
|
|
error:
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
static void rtl8xxxu_rx_parse_phystats(struct rtl8xxxu_priv *priv,
|
|
struct ieee80211_rx_status *rx_status,
|
|
struct rtl8723au_phy_stats *phy_stats,
|
|
u32 rxmcs)
|
|
{
|
|
if (phy_stats->sgi_en)
|
|
rx_status->flag |= RX_FLAG_SHORT_GI;
|
|
|
|
if (rxmcs < DESC_RATE_6M) {
|
|
/*
|
|
* Handle PHY stats for CCK rates
|
|
*/
|
|
u8 cck_agc_rpt = phy_stats->cck_agc_rpt_ofdm_cfosho_a;
|
|
|
|
switch (cck_agc_rpt & 0xc0) {
|
|
case 0xc0:
|
|
rx_status->signal = -46 - (cck_agc_rpt & 0x3e);
|
|
break;
|
|
case 0x80:
|
|
rx_status->signal = -26 - (cck_agc_rpt & 0x3e);
|
|
break;
|
|
case 0x40:
|
|
rx_status->signal = -12 - (cck_agc_rpt & 0x3e);
|
|
break;
|
|
case 0x00:
|
|
rx_status->signal = 16 - (cck_agc_rpt & 0x3e);
|
|
break;
|
|
}
|
|
} else {
|
|
rx_status->signal =
|
|
(phy_stats->cck_sig_qual_ofdm_pwdb_all >> 1) - 110;
|
|
}
|
|
}
|
|
|
|
static void rtl8xxxu_free_rx_resources(struct rtl8xxxu_priv *priv)
|
|
{
|
|
struct rtl8xxxu_rx_urb *rx_urb, *tmp;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->rx_urb_lock, flags);
|
|
|
|
list_for_each_entry_safe(rx_urb, tmp,
|
|
&priv->rx_urb_pending_list, list) {
|
|
list_del(&rx_urb->list);
|
|
priv->rx_urb_pending_count--;
|
|
usb_free_urb(&rx_urb->urb);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
|
|
}
|
|
|
|
static void rtl8xxxu_queue_rx_urb(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_rx_urb *rx_urb)
|
|
{
|
|
struct sk_buff *skb;
|
|
unsigned long flags;
|
|
int pending = 0;
|
|
|
|
spin_lock_irqsave(&priv->rx_urb_lock, flags);
|
|
|
|
if (!priv->shutdown) {
|
|
list_add_tail(&rx_urb->list, &priv->rx_urb_pending_list);
|
|
priv->rx_urb_pending_count++;
|
|
pending = priv->rx_urb_pending_count;
|
|
} else {
|
|
skb = (struct sk_buff *)rx_urb->urb.context;
|
|
dev_kfree_skb(skb);
|
|
usb_free_urb(&rx_urb->urb);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
|
|
|
|
if (pending > RTL8XXXU_RX_URB_PENDING_WATER)
|
|
schedule_work(&priv->rx_urb_wq);
|
|
}
|
|
|
|
static void rtl8xxxu_rx_urb_work(struct work_struct *work)
|
|
{
|
|
struct rtl8xxxu_priv *priv;
|
|
struct rtl8xxxu_rx_urb *rx_urb, *tmp;
|
|
struct list_head local;
|
|
struct sk_buff *skb;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
priv = container_of(work, struct rtl8xxxu_priv, rx_urb_wq);
|
|
INIT_LIST_HEAD(&local);
|
|
|
|
spin_lock_irqsave(&priv->rx_urb_lock, flags);
|
|
|
|
list_splice_init(&priv->rx_urb_pending_list, &local);
|
|
priv->rx_urb_pending_count = 0;
|
|
|
|
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
|
|
|
|
list_for_each_entry_safe(rx_urb, tmp, &local, list) {
|
|
list_del_init(&rx_urb->list);
|
|
ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
|
|
/*
|
|
* If out of memory or temporary error, put it back on the
|
|
* queue and try again. Otherwise the device is dead/gone
|
|
* and we should drop it.
|
|
*/
|
|
switch (ret) {
|
|
case 0:
|
|
break;
|
|
case -ENOMEM:
|
|
case -EAGAIN:
|
|
rtl8xxxu_queue_rx_urb(priv, rx_urb);
|
|
break;
|
|
default:
|
|
pr_info("failed to requeue urb %i\n", ret);
|
|
skb = (struct sk_buff *)rx_urb->urb.context;
|
|
dev_kfree_skb(skb);
|
|
usb_free_urb(&rx_urb->urb);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int rtl8723au_parse_rx_desc(struct rtl8xxxu_priv *priv,
|
|
struct sk_buff *skb,
|
|
struct ieee80211_rx_status *rx_status)
|
|
{
|
|
struct rtl8xxxu_rx_desc *rx_desc = (struct rtl8xxxu_rx_desc *)skb->data;
|
|
struct rtl8723au_phy_stats *phy_stats;
|
|
int drvinfo_sz, desc_shift;
|
|
|
|
skb_pull(skb, sizeof(struct rtl8xxxu_rx_desc));
|
|
|
|
phy_stats = (struct rtl8723au_phy_stats *)skb->data;
|
|
|
|
drvinfo_sz = rx_desc->drvinfo_sz * 8;
|
|
desc_shift = rx_desc->shift;
|
|
skb_pull(skb, drvinfo_sz + desc_shift);
|
|
|
|
if (rx_desc->phy_stats)
|
|
rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats,
|
|
rx_desc->rxmcs);
|
|
|
|
rx_status->mactime = le32_to_cpu(rx_desc->tsfl);
|
|
rx_status->flag |= RX_FLAG_MACTIME_START;
|
|
|
|
if (!rx_desc->swdec)
|
|
rx_status->flag |= RX_FLAG_DECRYPTED;
|
|
if (rx_desc->crc32)
|
|
rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
|
|
if (rx_desc->bw)
|
|
rx_status->flag |= RX_FLAG_40MHZ;
|
|
|
|
if (rx_desc->rxht) {
|
|
rx_status->flag |= RX_FLAG_HT;
|
|
rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
|
|
} else {
|
|
rx_status->rate_idx = rx_desc->rxmcs;
|
|
}
|
|
|
|
return RX_TYPE_DATA_PKT;
|
|
}
|
|
|
|
static int rtl8723bu_parse_rx_desc(struct rtl8xxxu_priv *priv,
|
|
struct sk_buff *skb,
|
|
struct ieee80211_rx_status *rx_status)
|
|
{
|
|
struct rtl8723bu_rx_desc *rx_desc =
|
|
(struct rtl8723bu_rx_desc *)skb->data;
|
|
struct rtl8723au_phy_stats *phy_stats;
|
|
int drvinfo_sz, desc_shift;
|
|
|
|
skb_pull(skb, sizeof(struct rtl8723bu_rx_desc));
|
|
|
|
phy_stats = (struct rtl8723au_phy_stats *)skb->data;
|
|
|
|
drvinfo_sz = rx_desc->drvinfo_sz * 8;
|
|
desc_shift = rx_desc->shift;
|
|
skb_pull(skb, drvinfo_sz + desc_shift);
|
|
|
|
if (rx_desc->rpt_sel) {
|
|
struct device *dev = &priv->udev->dev;
|
|
dev_dbg(dev, "%s: C2H packet\n", __func__);
|
|
return RX_TYPE_C2H;
|
|
}
|
|
|
|
if (rx_desc->phy_stats)
|
|
rtl8xxxu_rx_parse_phystats(priv, rx_status, phy_stats,
|
|
rx_desc->rxmcs);
|
|
|
|
rx_status->mactime = le32_to_cpu(rx_desc->tsfl);
|
|
rx_status->flag |= RX_FLAG_MACTIME_START;
|
|
|
|
if (!rx_desc->swdec)
|
|
rx_status->flag |= RX_FLAG_DECRYPTED;
|
|
if (rx_desc->crc32)
|
|
rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
|
|
if (rx_desc->bw)
|
|
rx_status->flag |= RX_FLAG_40MHZ;
|
|
|
|
if (rx_desc->rxmcs >= DESC_RATE_MCS0) {
|
|
rx_status->flag |= RX_FLAG_HT;
|
|
rx_status->rate_idx = rx_desc->rxmcs - DESC_RATE_MCS0;
|
|
} else {
|
|
rx_status->rate_idx = rx_desc->rxmcs;
|
|
}
|
|
|
|
return RX_TYPE_DATA_PKT;
|
|
}
|
|
|
|
static void rtl8723bu_handle_c2h(struct rtl8xxxu_priv *priv,
|
|
struct sk_buff *skb)
|
|
{
|
|
struct rtl8723bu_c2h *c2h = (struct rtl8723bu_c2h *)skb->data;
|
|
struct device *dev = &priv->udev->dev;
|
|
int len;
|
|
|
|
len = skb->len - 2;
|
|
|
|
dev_dbg(dev, "C2H ID %02x seq %02x, len %02x source %02x\n",
|
|
c2h->id, c2h->seq, len, c2h->bt_info.response_source);
|
|
|
|
switch(c2h->id) {
|
|
case C2H_8723B_BT_INFO:
|
|
if (c2h->bt_info.response_source >
|
|
BT_INFO_SRC_8723B_BT_ACTIVE_SEND)
|
|
dev_dbg(dev, "C2H_BT_INFO WiFi only firmware\n");
|
|
else
|
|
dev_dbg(dev, "C2H_BT_INFO BT/WiFi coexist firmware\n");
|
|
|
|
if (c2h->bt_info.bt_has_reset)
|
|
dev_dbg(dev, "BT has been reset\n");
|
|
if (c2h->bt_info.tx_rx_mask)
|
|
dev_dbg(dev, "BT TRx mask\n");
|
|
|
|
break;
|
|
case C2H_8723B_BT_MP_INFO:
|
|
dev_dbg(dev, "C2H_MP_INFO ext ID %02x, status %02x\n",
|
|
c2h->bt_mp_info.ext_id, c2h->bt_mp_info.status);
|
|
break;
|
|
case C2H_8723B_RA_REPORT:
|
|
dev_dbg(dev,
|
|
"C2H RA RPT: rate %02x, unk %i, macid %02x, noise %i\n",
|
|
c2h->ra_report.rate, c2h->ra_report.dummy0_0,
|
|
c2h->ra_report.macid, c2h->ra_report.noisy_state);
|
|
break;
|
|
default:
|
|
dev_info(dev, "Unhandled C2H event %02x seq %02x\n",
|
|
c2h->id, c2h->seq);
|
|
print_hex_dump(KERN_INFO, "C2H content: ", DUMP_PREFIX_NONE,
|
|
16, 1, c2h->raw.payload, len, false);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void rtl8xxxu_rx_complete(struct urb *urb)
|
|
{
|
|
struct rtl8xxxu_rx_urb *rx_urb =
|
|
container_of(urb, struct rtl8xxxu_rx_urb, urb);
|
|
struct ieee80211_hw *hw = rx_urb->hw;
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct sk_buff *skb = (struct sk_buff *)urb->context;
|
|
struct ieee80211_rx_status *rx_status = IEEE80211_SKB_RXCB(skb);
|
|
struct device *dev = &priv->udev->dev;
|
|
__le32 *_rx_desc_le = (__le32 *)skb->data;
|
|
u32 *_rx_desc = (u32 *)skb->data;
|
|
int rx_type, i;
|
|
|
|
for (i = 0; i < (sizeof(struct rtl8xxxu_rx_desc) / sizeof(u32)); i++)
|
|
_rx_desc[i] = le32_to_cpu(_rx_desc_le[i]);
|
|
|
|
skb_put(skb, urb->actual_length);
|
|
|
|
if (urb->status == 0) {
|
|
memset(rx_status, 0, sizeof(struct ieee80211_rx_status));
|
|
|
|
rx_type = priv->fops->parse_rx_desc(priv, skb, rx_status);
|
|
|
|
rx_status->freq = hw->conf.chandef.chan->center_freq;
|
|
rx_status->band = hw->conf.chandef.chan->band;
|
|
|
|
if (rx_type == RX_TYPE_DATA_PKT)
|
|
ieee80211_rx_irqsafe(hw, skb);
|
|
else {
|
|
rtl8723bu_handle_c2h(priv, skb);
|
|
dev_kfree_skb(skb);
|
|
}
|
|
|
|
skb = NULL;
|
|
rx_urb->urb.context = NULL;
|
|
rtl8xxxu_queue_rx_urb(priv, rx_urb);
|
|
} else {
|
|
dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
|
|
goto cleanup;
|
|
}
|
|
return;
|
|
|
|
cleanup:
|
|
usb_free_urb(urb);
|
|
dev_kfree_skb(skb);
|
|
return;
|
|
}
|
|
|
|
static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
|
|
struct rtl8xxxu_rx_urb *rx_urb)
|
|
{
|
|
struct sk_buff *skb;
|
|
int skb_size;
|
|
int ret;
|
|
|
|
skb_size = sizeof(struct rtl8xxxu_rx_desc) + RTL_RX_BUFFER_SIZE;
|
|
skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL);
|
|
if (!skb)
|
|
return -ENOMEM;
|
|
|
|
memset(skb->data, 0, sizeof(struct rtl8xxxu_rx_desc));
|
|
usb_fill_bulk_urb(&rx_urb->urb, priv->udev, priv->pipe_in, skb->data,
|
|
skb_size, rtl8xxxu_rx_complete, skb);
|
|
usb_anchor_urb(&rx_urb->urb, &priv->rx_anchor);
|
|
ret = usb_submit_urb(&rx_urb->urb, GFP_ATOMIC);
|
|
if (ret)
|
|
usb_unanchor_urb(&rx_urb->urb);
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_int_complete(struct urb *urb)
|
|
{
|
|
struct rtl8xxxu_priv *priv = (struct rtl8xxxu_priv *)urb->context;
|
|
struct device *dev = &priv->udev->dev;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s: status %i\n", __func__, urb->status);
|
|
if (urb->status == 0) {
|
|
usb_anchor_urb(urb, &priv->int_anchor);
|
|
ret = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (ret)
|
|
usb_unanchor_urb(urb);
|
|
} else {
|
|
dev_info(dev, "%s: Error %i\n", __func__, urb->status);
|
|
}
|
|
}
|
|
|
|
|
|
static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct urb *urb;
|
|
u32 val32;
|
|
int ret;
|
|
|
|
urb = usb_alloc_urb(0, GFP_KERNEL);
|
|
if (!urb)
|
|
return -ENOMEM;
|
|
|
|
usb_fill_int_urb(urb, priv->udev, priv->pipe_interrupt,
|
|
priv->int_buf, USB_INTR_CONTENT_LENGTH,
|
|
rtl8xxxu_int_complete, priv, 1);
|
|
usb_anchor_urb(urb, &priv->int_anchor);
|
|
ret = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (ret) {
|
|
usb_unanchor_urb(urb);
|
|
goto error;
|
|
}
|
|
|
|
val32 = rtl8xxxu_read32(priv, REG_USB_HIMR);
|
|
val32 |= USB_HIMR_CPWM;
|
|
rtl8xxxu_write32(priv, REG_USB_HIMR, val32);
|
|
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_add_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
int ret;
|
|
u8 val8;
|
|
|
|
switch (vif->type) {
|
|
case NL80211_IFTYPE_STATION:
|
|
rtl8723a_stop_tx_beacon(priv);
|
|
|
|
val8 = rtl8xxxu_read8(priv, REG_BEACON_CTRL);
|
|
val8 |= BEACON_ATIM | BEACON_FUNCTION_ENABLE |
|
|
BEACON_DISABLE_TSF_UPDATE;
|
|
rtl8xxxu_write8(priv, REG_BEACON_CTRL, val8);
|
|
ret = 0;
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
}
|
|
|
|
rtl8xxxu_set_linktype(priv, vif->type);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_remove_interface(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
|
|
dev_dbg(&priv->udev->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static int rtl8xxxu_config(struct ieee80211_hw *hw, u32 changed)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct device *dev = &priv->udev->dev;
|
|
u16 val16;
|
|
int ret = 0, channel;
|
|
bool ht40;
|
|
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_CHANNEL)
|
|
dev_info(dev,
|
|
"%s: channel: %i (changed %08x chandef.width %02x)\n",
|
|
__func__, hw->conf.chandef.chan->hw_value,
|
|
changed, hw->conf.chandef.width);
|
|
|
|
if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
|
|
val16 = ((hw->conf.long_frame_max_tx_count <<
|
|
RETRY_LIMIT_LONG_SHIFT) & RETRY_LIMIT_LONG_MASK) |
|
|
((hw->conf.short_frame_max_tx_count <<
|
|
RETRY_LIMIT_SHORT_SHIFT) & RETRY_LIMIT_SHORT_MASK);
|
|
rtl8xxxu_write16(priv, REG_RETRY_LIMIT, val16);
|
|
}
|
|
|
|
if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
|
|
switch (hw->conf.chandef.width) {
|
|
case NL80211_CHAN_WIDTH_20_NOHT:
|
|
case NL80211_CHAN_WIDTH_20:
|
|
ht40 = false;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
ht40 = true;
|
|
break;
|
|
default:
|
|
ret = -ENOTSUPP;
|
|
goto exit;
|
|
}
|
|
|
|
channel = hw->conf.chandef.chan->hw_value;
|
|
|
|
priv->fops->set_tx_power(priv, channel, ht40);
|
|
|
|
priv->fops->config_channel(hw);
|
|
}
|
|
|
|
exit:
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_conf_tx(struct ieee80211_hw *hw,
|
|
struct ieee80211_vif *vif, u16 queue,
|
|
const struct ieee80211_tx_queue_params *param)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct device *dev = &priv->udev->dev;
|
|
u32 val32;
|
|
u8 aifs, acm_ctrl, acm_bit;
|
|
|
|
aifs = param->aifs;
|
|
|
|
val32 = aifs |
|
|
fls(param->cw_min) << EDCA_PARAM_ECW_MIN_SHIFT |
|
|
fls(param->cw_max) << EDCA_PARAM_ECW_MAX_SHIFT |
|
|
(u32)param->txop << EDCA_PARAM_TXOP_SHIFT;
|
|
|
|
acm_ctrl = rtl8xxxu_read8(priv, REG_ACM_HW_CTRL);
|
|
dev_dbg(dev,
|
|
"%s: IEEE80211 queue %02x val %08x, acm %i, acm_ctrl %02x\n",
|
|
__func__, queue, val32, param->acm, acm_ctrl);
|
|
|
|
switch (queue) {
|
|
case IEEE80211_AC_VO:
|
|
acm_bit = ACM_HW_CTRL_VO;
|
|
rtl8xxxu_write32(priv, REG_EDCA_VO_PARAM, val32);
|
|
break;
|
|
case IEEE80211_AC_VI:
|
|
acm_bit = ACM_HW_CTRL_VI;
|
|
rtl8xxxu_write32(priv, REG_EDCA_VI_PARAM, val32);
|
|
break;
|
|
case IEEE80211_AC_BE:
|
|
acm_bit = ACM_HW_CTRL_BE;
|
|
rtl8xxxu_write32(priv, REG_EDCA_BE_PARAM, val32);
|
|
break;
|
|
case IEEE80211_AC_BK:
|
|
acm_bit = ACM_HW_CTRL_BK;
|
|
rtl8xxxu_write32(priv, REG_EDCA_BK_PARAM, val32);
|
|
break;
|
|
default:
|
|
acm_bit = 0;
|
|
break;
|
|
}
|
|
|
|
if (param->acm)
|
|
acm_ctrl |= acm_bit;
|
|
else
|
|
acm_ctrl &= ~acm_bit;
|
|
rtl8xxxu_write8(priv, REG_ACM_HW_CTRL, acm_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rtl8xxxu_configure_filter(struct ieee80211_hw *hw,
|
|
unsigned int changed_flags,
|
|
unsigned int *total_flags, u64 multicast)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
u32 rcr = rtl8xxxu_read32(priv, REG_RCR);
|
|
|
|
dev_dbg(&priv->udev->dev, "%s: changed_flags %08x, total_flags %08x\n",
|
|
__func__, changed_flags, *total_flags);
|
|
|
|
/*
|
|
* FIF_ALLMULTI ignored as all multicast frames are accepted (REG_MAR)
|
|
*/
|
|
|
|
if (*total_flags & FIF_FCSFAIL)
|
|
rcr |= RCR_ACCEPT_CRC32;
|
|
else
|
|
rcr &= ~RCR_ACCEPT_CRC32;
|
|
|
|
/*
|
|
* FIF_PLCPFAIL not supported?
|
|
*/
|
|
|
|
if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
|
|
rcr &= ~RCR_CHECK_BSSID_BEACON;
|
|
else
|
|
rcr |= RCR_CHECK_BSSID_BEACON;
|
|
|
|
if (*total_flags & FIF_CONTROL)
|
|
rcr |= RCR_ACCEPT_CTRL_FRAME;
|
|
else
|
|
rcr &= ~RCR_ACCEPT_CTRL_FRAME;
|
|
|
|
if (*total_flags & FIF_OTHER_BSS) {
|
|
rcr |= RCR_ACCEPT_AP;
|
|
rcr &= ~RCR_CHECK_BSSID_MATCH;
|
|
} else {
|
|
rcr &= ~RCR_ACCEPT_AP;
|
|
rcr |= RCR_CHECK_BSSID_MATCH;
|
|
}
|
|
|
|
if (*total_flags & FIF_PSPOLL)
|
|
rcr |= RCR_ACCEPT_PM;
|
|
else
|
|
rcr &= ~RCR_ACCEPT_PM;
|
|
|
|
/*
|
|
* FIF_PROBE_REQ ignored as probe requests always seem to be accepted
|
|
*/
|
|
|
|
rtl8xxxu_write32(priv, REG_RCR, rcr);
|
|
|
|
*total_flags &= (FIF_ALLMULTI | FIF_FCSFAIL | FIF_BCN_PRBRESP_PROMISC |
|
|
FIF_CONTROL | FIF_OTHER_BSS | FIF_PSPOLL |
|
|
FIF_PROBE_REQ);
|
|
}
|
|
|
|
static int rtl8xxxu_set_rts_threshold(struct ieee80211_hw *hw, u32 rts)
|
|
{
|
|
if (rts > 2347)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
|
|
struct ieee80211_vif *vif,
|
|
struct ieee80211_sta *sta,
|
|
struct ieee80211_key_conf *key)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct device *dev = &priv->udev->dev;
|
|
u8 mac_addr[ETH_ALEN];
|
|
u8 val8;
|
|
u16 val16;
|
|
u32 val32;
|
|
int retval = -EOPNOTSUPP;
|
|
|
|
dev_dbg(dev, "%s: cmd %02x, cipher %08x, index %i\n",
|
|
__func__, cmd, key->cipher, key->keyidx);
|
|
|
|
if (vif->type != NL80211_IFTYPE_STATION)
|
|
return -EOPNOTSUPP;
|
|
|
|
if (key->keyidx > 3)
|
|
return -EOPNOTSUPP;
|
|
|
|
switch (key->cipher) {
|
|
case WLAN_CIPHER_SUITE_WEP40:
|
|
case WLAN_CIPHER_SUITE_WEP104:
|
|
|
|
break;
|
|
case WLAN_CIPHER_SUITE_CCMP:
|
|
key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX;
|
|
break;
|
|
case WLAN_CIPHER_SUITE_TKIP:
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) {
|
|
dev_dbg(dev, "%s: pairwise key\n", __func__);
|
|
ether_addr_copy(mac_addr, sta->addr);
|
|
} else {
|
|
dev_dbg(dev, "%s: group key\n", __func__);
|
|
eth_broadcast_addr(mac_addr);
|
|
}
|
|
|
|
val16 = rtl8xxxu_read16(priv, REG_CR);
|
|
val16 |= CR_SECURITY_ENABLE;
|
|
rtl8xxxu_write16(priv, REG_CR, val16);
|
|
|
|
val8 = SEC_CFG_TX_SEC_ENABLE | SEC_CFG_TXBC_USE_DEFKEY |
|
|
SEC_CFG_RX_SEC_ENABLE | SEC_CFG_RXBC_USE_DEFKEY;
|
|
val8 |= SEC_CFG_TX_USE_DEFKEY | SEC_CFG_RX_USE_DEFKEY;
|
|
rtl8xxxu_write8(priv, REG_SECURITY_CFG, val8);
|
|
|
|
switch (cmd) {
|
|
case SET_KEY:
|
|
key->hw_key_idx = key->keyidx;
|
|
key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
|
|
rtl8xxxu_cam_write(priv, key, mac_addr);
|
|
retval = 0;
|
|
break;
|
|
case DISABLE_KEY:
|
|
rtl8xxxu_write32(priv, REG_CAM_WRITE, 0x00000000);
|
|
val32 = CAM_CMD_POLLING | CAM_CMD_WRITE |
|
|
key->keyidx << CAM_CMD_KEY_SHIFT;
|
|
rtl8xxxu_write32(priv, REG_CAM_CMD, val32);
|
|
retval = 0;
|
|
break;
|
|
default:
|
|
dev_warn(dev, "%s: Unsupported command %02x\n", __func__, cmd);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
rtl8xxxu_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
|
|
struct ieee80211_ampdu_params *params)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct device *dev = &priv->udev->dev;
|
|
u8 ampdu_factor, ampdu_density;
|
|
struct ieee80211_sta *sta = params->sta;
|
|
enum ieee80211_ampdu_mlme_action action = params->action;
|
|
|
|
switch (action) {
|
|
case IEEE80211_AMPDU_TX_START:
|
|
dev_info(dev, "%s: IEEE80211_AMPDU_TX_START\n", __func__);
|
|
ampdu_factor = sta->ht_cap.ampdu_factor;
|
|
ampdu_density = sta->ht_cap.ampdu_density;
|
|
rtl8xxxu_set_ampdu_factor(priv, ampdu_factor);
|
|
rtl8xxxu_set_ampdu_min_space(priv, ampdu_density);
|
|
dev_dbg(dev,
|
|
"Changed HT: ampdu_factor %02x, ampdu_density %02x\n",
|
|
ampdu_factor, ampdu_density);
|
|
break;
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH:
|
|
dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH\n", __func__);
|
|
rtl8xxxu_set_ampdu_factor(priv, 0);
|
|
rtl8xxxu_set_ampdu_min_space(priv, 0);
|
|
break;
|
|
case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
|
|
dev_info(dev, "%s: IEEE80211_AMPDU_TX_STOP_FLUSH_CONT\n",
|
|
__func__);
|
|
rtl8xxxu_set_ampdu_factor(priv, 0);
|
|
rtl8xxxu_set_ampdu_min_space(priv, 0);
|
|
break;
|
|
case IEEE80211_AMPDU_RX_START:
|
|
dev_info(dev, "%s: IEEE80211_AMPDU_RX_START\n", __func__);
|
|
break;
|
|
case IEEE80211_AMPDU_RX_STOP:
|
|
dev_info(dev, "%s: IEEE80211_AMPDU_RX_STOP\n", __func__);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int rtl8xxxu_start(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
struct rtl8xxxu_rx_urb *rx_urb;
|
|
struct rtl8xxxu_tx_urb *tx_urb;
|
|
unsigned long flags;
|
|
int ret, i;
|
|
|
|
ret = 0;
|
|
|
|
init_usb_anchor(&priv->rx_anchor);
|
|
init_usb_anchor(&priv->tx_anchor);
|
|
init_usb_anchor(&priv->int_anchor);
|
|
|
|
priv->fops->enable_rf(priv);
|
|
if (priv->usb_interrupts) {
|
|
ret = rtl8xxxu_submit_int_urb(hw);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
for (i = 0; i < RTL8XXXU_TX_URBS; i++) {
|
|
tx_urb = kmalloc(sizeof(struct rtl8xxxu_tx_urb), GFP_KERNEL);
|
|
if (!tx_urb) {
|
|
if (!i)
|
|
ret = -ENOMEM;
|
|
|
|
goto error_out;
|
|
}
|
|
usb_init_urb(&tx_urb->urb);
|
|
INIT_LIST_HEAD(&tx_urb->list);
|
|
tx_urb->hw = hw;
|
|
list_add(&tx_urb->list, &priv->tx_urb_free_list);
|
|
priv->tx_urb_free_count++;
|
|
}
|
|
|
|
priv->tx_stopped = false;
|
|
|
|
spin_lock_irqsave(&priv->rx_urb_lock, flags);
|
|
priv->shutdown = false;
|
|
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
|
|
|
|
for (i = 0; i < RTL8XXXU_RX_URBS; i++) {
|
|
rx_urb = kmalloc(sizeof(struct rtl8xxxu_rx_urb), GFP_KERNEL);
|
|
if (!rx_urb) {
|
|
if (!i)
|
|
ret = -ENOMEM;
|
|
|
|
goto error_out;
|
|
}
|
|
usb_init_urb(&rx_urb->urb);
|
|
INIT_LIST_HEAD(&rx_urb->list);
|
|
rx_urb->hw = hw;
|
|
|
|
ret = rtl8xxxu_submit_rx_urb(priv, rx_urb);
|
|
}
|
|
exit:
|
|
/*
|
|
* Accept all data and mgmt frames
|
|
*/
|
|
rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0xffff);
|
|
rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0xffff);
|
|
|
|
rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, 0x6954341e);
|
|
|
|
return ret;
|
|
|
|
error_out:
|
|
rtl8xxxu_free_tx_resources(priv);
|
|
/*
|
|
* Disable all data and mgmt frames
|
|
*/
|
|
rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000);
|
|
rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_stop(struct ieee80211_hw *hw)
|
|
{
|
|
struct rtl8xxxu_priv *priv = hw->priv;
|
|
unsigned long flags;
|
|
|
|
rtl8xxxu_write8(priv, REG_TXPAUSE, 0xff);
|
|
|
|
rtl8xxxu_write16(priv, REG_RXFLTMAP0, 0x0000);
|
|
rtl8xxxu_write16(priv, REG_RXFLTMAP2, 0x0000);
|
|
|
|
spin_lock_irqsave(&priv->rx_urb_lock, flags);
|
|
priv->shutdown = true;
|
|
spin_unlock_irqrestore(&priv->rx_urb_lock, flags);
|
|
|
|
usb_kill_anchored_urbs(&priv->rx_anchor);
|
|
usb_kill_anchored_urbs(&priv->tx_anchor);
|
|
if (priv->usb_interrupts)
|
|
usb_kill_anchored_urbs(&priv->int_anchor);
|
|
|
|
priv->fops->disable_rf(priv);
|
|
|
|
/*
|
|
* Disable interrupts
|
|
*/
|
|
if (priv->usb_interrupts)
|
|
rtl8xxxu_write32(priv, REG_USB_HIMR, 0);
|
|
|
|
rtl8xxxu_free_rx_resources(priv);
|
|
rtl8xxxu_free_tx_resources(priv);
|
|
}
|
|
|
|
static const struct ieee80211_ops rtl8xxxu_ops = {
|
|
.tx = rtl8xxxu_tx,
|
|
.add_interface = rtl8xxxu_add_interface,
|
|
.remove_interface = rtl8xxxu_remove_interface,
|
|
.config = rtl8xxxu_config,
|
|
.conf_tx = rtl8xxxu_conf_tx,
|
|
.bss_info_changed = rtl8xxxu_bss_info_changed,
|
|
.configure_filter = rtl8xxxu_configure_filter,
|
|
.set_rts_threshold = rtl8xxxu_set_rts_threshold,
|
|
.start = rtl8xxxu_start,
|
|
.stop = rtl8xxxu_stop,
|
|
.sw_scan_start = rtl8xxxu_sw_scan_start,
|
|
.sw_scan_complete = rtl8xxxu_sw_scan_complete,
|
|
.set_key = rtl8xxxu_set_key,
|
|
.ampdu_action = rtl8xxxu_ampdu_action,
|
|
};
|
|
|
|
static int rtl8xxxu_parse_usb(struct rtl8xxxu_priv *priv,
|
|
struct usb_interface *interface)
|
|
{
|
|
struct usb_interface_descriptor *interface_desc;
|
|
struct usb_host_interface *host_interface;
|
|
struct usb_endpoint_descriptor *endpoint;
|
|
struct device *dev = &priv->udev->dev;
|
|
int i, j = 0, endpoints;
|
|
u8 dir, xtype, num;
|
|
int ret = 0;
|
|
|
|
host_interface = &interface->altsetting[0];
|
|
interface_desc = &host_interface->desc;
|
|
endpoints = interface_desc->bNumEndpoints;
|
|
|
|
for (i = 0; i < endpoints; i++) {
|
|
endpoint = &host_interface->endpoint[i].desc;
|
|
|
|
dir = endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
|
|
num = usb_endpoint_num(endpoint);
|
|
xtype = usb_endpoint_type(endpoint);
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
|
|
dev_dbg(dev,
|
|
"%s: endpoint: dir %02x, # %02x, type %02x\n",
|
|
__func__, dir, num, xtype);
|
|
if (usb_endpoint_dir_in(endpoint) &&
|
|
usb_endpoint_xfer_bulk(endpoint)) {
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
|
|
dev_dbg(dev, "%s: in endpoint num %i\n",
|
|
__func__, num);
|
|
|
|
if (priv->pipe_in) {
|
|
dev_warn(dev,
|
|
"%s: Too many IN pipes\n", __func__);
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
priv->pipe_in = usb_rcvbulkpipe(priv->udev, num);
|
|
}
|
|
|
|
if (usb_endpoint_dir_in(endpoint) &&
|
|
usb_endpoint_xfer_int(endpoint)) {
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
|
|
dev_dbg(dev, "%s: interrupt endpoint num %i\n",
|
|
__func__, num);
|
|
|
|
if (priv->pipe_interrupt) {
|
|
dev_warn(dev, "%s: Too many INTERRUPT pipes\n",
|
|
__func__);
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
priv->pipe_interrupt = usb_rcvintpipe(priv->udev, num);
|
|
}
|
|
|
|
if (usb_endpoint_dir_out(endpoint) &&
|
|
usb_endpoint_xfer_bulk(endpoint)) {
|
|
if (rtl8xxxu_debug & RTL8XXXU_DEBUG_USB)
|
|
dev_dbg(dev, "%s: out endpoint num %i\n",
|
|
__func__, num);
|
|
if (j >= RTL8XXXU_OUT_ENDPOINTS) {
|
|
dev_warn(dev,
|
|
"%s: Too many OUT pipes\n", __func__);
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
priv->out_ep[j++] = num;
|
|
}
|
|
}
|
|
exit:
|
|
priv->nr_out_eps = j;
|
|
return ret;
|
|
}
|
|
|
|
static int rtl8xxxu_probe(struct usb_interface *interface,
|
|
const struct usb_device_id *id)
|
|
{
|
|
struct rtl8xxxu_priv *priv;
|
|
struct ieee80211_hw *hw;
|
|
struct usb_device *udev;
|
|
struct ieee80211_supported_band *sband;
|
|
int ret = 0;
|
|
int untested = 1;
|
|
|
|
udev = usb_get_dev(interface_to_usbdev(interface));
|
|
|
|
switch (id->idVendor) {
|
|
case USB_VENDOR_ID_REALTEK:
|
|
switch(id->idProduct) {
|
|
case 0x1724:
|
|
case 0x8176:
|
|
case 0x8178:
|
|
case 0x817f:
|
|
untested = 0;
|
|
break;
|
|
}
|
|
break;
|
|
case 0x7392:
|
|
if (id->idProduct == 0x7811)
|
|
untested = 0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (untested) {
|
|
rtl8xxxu_debug |= RTL8XXXU_DEBUG_EFUSE;
|
|
dev_info(&udev->dev,
|
|
"This Realtek USB WiFi dongle (0x%04x:0x%04x) is untested!\n",
|
|
id->idVendor, id->idProduct);
|
|
dev_info(&udev->dev,
|
|
"Please report results to Jes.Sorensen@gmail.com\n");
|
|
}
|
|
|
|
hw = ieee80211_alloc_hw(sizeof(struct rtl8xxxu_priv), &rtl8xxxu_ops);
|
|
if (!hw) {
|
|
ret = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
priv = hw->priv;
|
|
priv->hw = hw;
|
|
priv->udev = udev;
|
|
priv->fops = (struct rtl8xxxu_fileops *)id->driver_info;
|
|
mutex_init(&priv->usb_buf_mutex);
|
|
mutex_init(&priv->h2c_mutex);
|
|
INIT_LIST_HEAD(&priv->tx_urb_free_list);
|
|
spin_lock_init(&priv->tx_urb_lock);
|
|
INIT_LIST_HEAD(&priv->rx_urb_pending_list);
|
|
spin_lock_init(&priv->rx_urb_lock);
|
|
INIT_WORK(&priv->rx_urb_wq, rtl8xxxu_rx_urb_work);
|
|
|
|
usb_set_intfdata(interface, hw);
|
|
|
|
ret = rtl8xxxu_parse_usb(priv, interface);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = rtl8xxxu_identify_chip(priv);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "Fatal - failed to identify chip\n");
|
|
goto exit;
|
|
}
|
|
|
|
ret = rtl8xxxu_read_efuse(priv);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "Fatal - failed to read EFuse\n");
|
|
goto exit;
|
|
}
|
|
|
|
ret = priv->fops->parse_efuse(priv);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "Fatal - failed to parse EFuse\n");
|
|
goto exit;
|
|
}
|
|
|
|
rtl8xxxu_print_chipinfo(priv);
|
|
|
|
ret = priv->fops->load_firmware(priv);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "Fatal - failed to load firmware\n");
|
|
goto exit;
|
|
}
|
|
|
|
ret = rtl8xxxu_init_device(hw);
|
|
|
|
hw->wiphy->max_scan_ssids = 1;
|
|
hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
|
|
hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
|
|
hw->queues = 4;
|
|
|
|
sband = &rtl8xxxu_supported_band;
|
|
sband->ht_cap.ht_supported = true;
|
|
sband->ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
|
|
sband->ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
|
|
sband->ht_cap.cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40;
|
|
memset(&sband->ht_cap.mcs, 0, sizeof(sband->ht_cap.mcs));
|
|
sband->ht_cap.mcs.rx_mask[0] = 0xff;
|
|
sband->ht_cap.mcs.rx_mask[4] = 0x01;
|
|
if (priv->rf_paths > 1) {
|
|
sband->ht_cap.mcs.rx_mask[1] = 0xff;
|
|
sband->ht_cap.cap |= IEEE80211_HT_CAP_SGI_40;
|
|
}
|
|
sband->ht_cap.mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
|
|
/*
|
|
* Some APs will negotiate HT20_40 in a noisy environment leading
|
|
* to miserable performance. Rather than defaulting to this, only
|
|
* enable it if explicitly requested at module load time.
|
|
*/
|
|
if (rtl8xxxu_ht40_2g) {
|
|
dev_info(&udev->dev, "Enabling HT_20_40 on the 2.4GHz band\n");
|
|
sband->ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40;
|
|
}
|
|
hw->wiphy->bands[NL80211_BAND_2GHZ] = sband;
|
|
|
|
hw->wiphy->rts_threshold = 2347;
|
|
|
|
SET_IEEE80211_DEV(priv->hw, &interface->dev);
|
|
SET_IEEE80211_PERM_ADDR(hw, priv->mac_addr);
|
|
|
|
hw->extra_tx_headroom = priv->fops->tx_desc_size;
|
|
ieee80211_hw_set(hw, SIGNAL_DBM);
|
|
/*
|
|
* The firmware handles rate control
|
|
*/
|
|
ieee80211_hw_set(hw, HAS_RATE_CONTROL);
|
|
ieee80211_hw_set(hw, AMPDU_AGGREGATION);
|
|
|
|
ret = ieee80211_register_hw(priv->hw);
|
|
if (ret) {
|
|
dev_err(&udev->dev, "%s: Failed to register: %i\n",
|
|
__func__, ret);
|
|
goto exit;
|
|
}
|
|
|
|
exit:
|
|
if (ret < 0)
|
|
usb_put_dev(udev);
|
|
return ret;
|
|
}
|
|
|
|
static void rtl8xxxu_disconnect(struct usb_interface *interface)
|
|
{
|
|
struct rtl8xxxu_priv *priv;
|
|
struct ieee80211_hw *hw;
|
|
|
|
hw = usb_get_intfdata(interface);
|
|
priv = hw->priv;
|
|
|
|
rtl8xxxu_disable_device(hw);
|
|
usb_set_intfdata(interface, NULL);
|
|
|
|
dev_info(&priv->udev->dev, "disconnecting\n");
|
|
|
|
ieee80211_unregister_hw(hw);
|
|
|
|
kfree(priv->fw_data);
|
|
mutex_destroy(&priv->usb_buf_mutex);
|
|
mutex_destroy(&priv->h2c_mutex);
|
|
|
|
usb_put_dev(priv->udev);
|
|
ieee80211_free_hw(hw);
|
|
}
|
|
|
|
static struct rtl8xxxu_fileops rtl8723au_fops = {
|
|
.parse_efuse = rtl8723au_parse_efuse,
|
|
.load_firmware = rtl8723au_load_firmware,
|
|
.power_on = rtl8723au_power_on,
|
|
.power_off = rtl8xxxu_power_off,
|
|
.reset_8051 = rtl8xxxu_reset_8051,
|
|
.llt_init = rtl8xxxu_init_llt_table,
|
|
.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
|
|
.config_channel = rtl8723au_config_channel,
|
|
.parse_rx_desc = rtl8723au_parse_rx_desc,
|
|
.enable_rf = rtl8723a_enable_rf,
|
|
.disable_rf = rtl8723a_disable_rf,
|
|
.set_tx_power = rtl8723a_set_tx_power,
|
|
.update_rate_mask = rtl8723au_update_rate_mask,
|
|
.report_connect = rtl8723au_report_connect,
|
|
.writeN_block_size = 1024,
|
|
.mbox_ext_reg = REG_HMBOX_EXT_0,
|
|
.mbox_ext_width = 2,
|
|
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
|
|
.adda_1t_init = 0x0b1b25a0,
|
|
.adda_1t_path_on = 0x0bdb25a0,
|
|
.adda_2t_path_on_a = 0x04db25a4,
|
|
.adda_2t_path_on_b = 0x0b1b25a4,
|
|
};
|
|
|
|
static struct rtl8xxxu_fileops rtl8723bu_fops = {
|
|
.parse_efuse = rtl8723bu_parse_efuse,
|
|
.load_firmware = rtl8723bu_load_firmware,
|
|
.power_on = rtl8723bu_power_on,
|
|
.power_off = rtl8723bu_power_off,
|
|
.reset_8051 = rtl8723bu_reset_8051,
|
|
.llt_init = rtl8xxxu_auto_llt_table,
|
|
.phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection,
|
|
.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
|
|
.config_channel = rtl8723bu_config_channel,
|
|
.parse_rx_desc = rtl8723bu_parse_rx_desc,
|
|
.init_aggregation = rtl8723bu_init_aggregation,
|
|
.init_statistics = rtl8723bu_init_statistics,
|
|
.enable_rf = rtl8723b_enable_rf,
|
|
.disable_rf = rtl8723b_disable_rf,
|
|
.set_tx_power = rtl8723b_set_tx_power,
|
|
.update_rate_mask = rtl8723bu_update_rate_mask,
|
|
.report_connect = rtl8723bu_report_connect,
|
|
.writeN_block_size = 1024,
|
|
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
|
|
.mbox_ext_width = 4,
|
|
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
|
|
.has_s0s1 = 1,
|
|
.adda_1t_init = 0x01c00014,
|
|
.adda_1t_path_on = 0x01c00014,
|
|
.adda_2t_path_on_a = 0x01c00014,
|
|
.adda_2t_path_on_b = 0x01c00014,
|
|
};
|
|
|
|
#ifdef CONFIG_RTL8XXXU_UNTESTED
|
|
|
|
static struct rtl8xxxu_fileops rtl8192cu_fops = {
|
|
.parse_efuse = rtl8192cu_parse_efuse,
|
|
.load_firmware = rtl8192cu_load_firmware,
|
|
.power_on = rtl8192cu_power_on,
|
|
.power_off = rtl8xxxu_power_off,
|
|
.reset_8051 = rtl8xxxu_reset_8051,
|
|
.llt_init = rtl8xxxu_init_llt_table,
|
|
.phy_iq_calibrate = rtl8723au_phy_iq_calibrate,
|
|
.config_channel = rtl8723au_config_channel,
|
|
.parse_rx_desc = rtl8723au_parse_rx_desc,
|
|
.enable_rf = rtl8723a_enable_rf,
|
|
.disable_rf = rtl8723a_disable_rf,
|
|
.set_tx_power = rtl8723a_set_tx_power,
|
|
.update_rate_mask = rtl8723au_update_rate_mask,
|
|
.report_connect = rtl8723au_report_connect,
|
|
.writeN_block_size = 128,
|
|
.mbox_ext_reg = REG_HMBOX_EXT_0,
|
|
.mbox_ext_width = 2,
|
|
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
|
|
.adda_1t_init = 0x0b1b25a0,
|
|
.adda_1t_path_on = 0x0bdb25a0,
|
|
.adda_2t_path_on_a = 0x04db25a4,
|
|
.adda_2t_path_on_b = 0x0b1b25a4,
|
|
};
|
|
|
|
#endif
|
|
|
|
static struct rtl8xxxu_fileops rtl8192eu_fops = {
|
|
.parse_efuse = rtl8192eu_parse_efuse,
|
|
.load_firmware = rtl8192eu_load_firmware,
|
|
.power_on = rtl8192eu_power_on,
|
|
.power_off = rtl8xxxu_power_off,
|
|
.reset_8051 = rtl8xxxu_reset_8051,
|
|
.llt_init = rtl8xxxu_auto_llt_table,
|
|
.phy_iq_calibrate = rtl8723bu_phy_iq_calibrate,
|
|
.config_channel = rtl8723bu_config_channel,
|
|
.parse_rx_desc = rtl8723bu_parse_rx_desc,
|
|
.enable_rf = rtl8723b_enable_rf,
|
|
.disable_rf = rtl8723b_disable_rf,
|
|
.set_tx_power = rtl8723b_set_tx_power,
|
|
.update_rate_mask = rtl8723bu_update_rate_mask,
|
|
.report_connect = rtl8723bu_report_connect,
|
|
.writeN_block_size = 128,
|
|
.mbox_ext_reg = REG_HMBOX_EXT0_8723B,
|
|
.mbox_ext_width = 4,
|
|
.tx_desc_size = sizeof(struct rtl8xxxu_txdesc40),
|
|
.has_s0s1 = 1,
|
|
.adda_1t_init = 0x0fc01616,
|
|
.adda_1t_path_on = 0x0fc01616,
|
|
.adda_2t_path_on_a = 0x0fc01616,
|
|
.adda_2t_path_on_b = 0x0fc01616,
|
|
};
|
|
|
|
static struct usb_device_id dev_table[] = {
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8724, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8723au_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1724, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8723au_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0724, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8723au_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818b, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192eu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8723bu_fops},
|
|
#ifdef CONFIG_RTL8XXXU_UNTESTED
|
|
/* Still supported by rtlwifi */
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8178, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817f, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
/* Tested by Larry Finger */
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7811, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
/* Currently untested 8188 series devices */
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8191, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8170, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8177, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817a, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817b, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817d, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x817e, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x818a, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x317f, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x1058, 0x0631, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x094c, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1102, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe033, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8189, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9041, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ba, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x1e1e, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x5088, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0052, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x005c, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0eb0, 0x9071, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x103c, 0x1629, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x13d3, 0x3357, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3308, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330b, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x4902, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2a, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2e, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xed17, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x648b, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0090, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x4856, 0x0091, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0xcdab, 0x8010, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff7, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff9, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffa, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaff8, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffb, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04f2, 0xaffc, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0x1201, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
/* Currently untested 8192 series devices */
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x04bb, 0x0950, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x1004, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2102, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x050d, 0x2103, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0586, 0x341f, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x06f8, 0xe035, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x17ab, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0061, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0070, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0789, 0x016d, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x07aa, 0x0056, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x07b8, 0x8178, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0x9021, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0846, 0xf001, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x2e2e, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0019, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x0e66, 0x0020, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3307, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3309, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x330a, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2019, 0xab2b, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x20f4, 0x624d, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0100, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x4855, 0x0091, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
{USB_DEVICE_AND_INTERFACE_INFO(0x7392, 0x7822, 0xff, 0xff, 0xff),
|
|
.driver_info = (unsigned long)&rtl8192cu_fops},
|
|
#endif
|
|
{ }
|
|
};
|
|
|
|
static struct usb_driver rtl8xxxu_driver = {
|
|
.name = DRIVER_NAME,
|
|
.probe = rtl8xxxu_probe,
|
|
.disconnect = rtl8xxxu_disconnect,
|
|
.id_table = dev_table,
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
static int __init rtl8xxxu_module_init(void)
|
|
{
|
|
int res;
|
|
|
|
res = usb_register(&rtl8xxxu_driver);
|
|
if (res < 0)
|
|
pr_err(DRIVER_NAME ": usb_register() failed (%i)\n", res);
|
|
|
|
return res;
|
|
}
|
|
|
|
static void __exit rtl8xxxu_module_exit(void)
|
|
{
|
|
usb_deregister(&rtl8xxxu_driver);
|
|
}
|
|
|
|
|
|
MODULE_DEVICE_TABLE(usb, dev_table);
|
|
|
|
module_init(rtl8xxxu_module_init);
|
|
module_exit(rtl8xxxu_module_exit);
|