mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-24 12:44:11 +08:00
57e104864b
This patch add a new quirk to add a s/w timer to notify the driver to terminate current transfer and report a data timeout to the core, if DTO interrupt does NOT come within the given time. dw_mmc call mmc_request_done func to finish transfer depends on DTO interrupt. If DTO interrupt does not come in sending data state, the current transfer will be blocked. We got the reply from synopsys: There are two counters but both use the same value of [31:8] bits. Data timeout counter doesn't wait for stop clock and you should get DRTO even when the clock is not stopped. Host Starvation timeout counter is triggered with stop clock condition. This means that host should get DRTO and DTO interrupt. But this case really exists, when driver reads tuning data from card on RK3288-pink2 board. I measured waveforms by oscilloscope and found that card clock was always on and data lines were always holded high level in sending data state. There are two possibility that data over interrupt doesn't come in reading data state on RK3X SoCs: - get command done interrupt, but doesn't get any data-related interrupt. - get data error interrupt, but doesn't get data over interrupt. Signed-off-by: Addy Ke <addy.ke@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
161 lines
4.1 KiB
C
161 lines
4.1 KiB
C
/*
|
|
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/dw_mmc.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include "dw_mmc.h"
|
|
#include "dw_mmc-pltfm.h"
|
|
|
|
#define RK3288_CLKGEN_DIV 2
|
|
|
|
static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
|
|
{
|
|
*cmdr |= SDMMC_CMD_USE_HOLD_REG;
|
|
}
|
|
|
|
static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
|
|
{
|
|
host->bus_hz /= RK3288_CLKGEN_DIV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
int ret;
|
|
unsigned int cclkin;
|
|
u32 bus_hz;
|
|
|
|
if (ios->clock == 0)
|
|
return;
|
|
|
|
/*
|
|
* cclkin: source clock of mmc controller
|
|
* bus_hz: card interface clock generated by CLKGEN
|
|
* bus_hz = cclkin / RK3288_CLKGEN_DIV
|
|
* ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
|
|
*
|
|
* Note: div can only be 0 or 1
|
|
* if DDR50 8bit mode(only emmc work in 8bit mode),
|
|
* div must be set 1
|
|
*/
|
|
if (ios->bus_width == MMC_BUS_WIDTH_8 &&
|
|
ios->timing == MMC_TIMING_MMC_DDR52)
|
|
cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
|
|
else
|
|
cclkin = ios->clock * RK3288_CLKGEN_DIV;
|
|
|
|
ret = clk_set_rate(host->ciu_clk, cclkin);
|
|
if (ret)
|
|
dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
|
|
|
|
bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
|
|
if (bus_hz != host->bus_hz) {
|
|
host->bus_hz = bus_hz;
|
|
/* force dw_mci_setup_bus() */
|
|
host->current_speed = 0;
|
|
}
|
|
}
|
|
|
|
static int dw_mci_rockchip_init(struct dw_mci *host)
|
|
{
|
|
/* It is slot 8 on Rockchip SoCs */
|
|
host->sdio_id0 = 8;
|
|
|
|
/* It needs this quirk on all Rockchip SoCs */
|
|
host->pdata->quirks |= DW_MCI_QUIRK_BROKEN_DTO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Common capabilities of RK3288 SoC */
|
|
static unsigned long dw_mci_rk3288_dwmmc_caps[4] = {
|
|
MMC_CAP_RUNTIME_RESUME, /* emmc */
|
|
MMC_CAP_RUNTIME_RESUME, /* sdmmc */
|
|
MMC_CAP_RUNTIME_RESUME, /* sdio0 */
|
|
MMC_CAP_RUNTIME_RESUME, /* sdio1 */
|
|
};
|
|
static const struct dw_mci_drv_data rk2928_drv_data = {
|
|
.prepare_command = dw_mci_rockchip_prepare_command,
|
|
.init = dw_mci_rockchip_init,
|
|
};
|
|
|
|
static const struct dw_mci_drv_data rk3288_drv_data = {
|
|
.caps = dw_mci_rk3288_dwmmc_caps,
|
|
.prepare_command = dw_mci_rockchip_prepare_command,
|
|
.set_ios = dw_mci_rk3288_set_ios,
|
|
.setup_clock = dw_mci_rk3288_setup_clock,
|
|
.init = dw_mci_rockchip_init,
|
|
};
|
|
|
|
static const struct of_device_id dw_mci_rockchip_match[] = {
|
|
{ .compatible = "rockchip,rk2928-dw-mshc",
|
|
.data = &rk2928_drv_data },
|
|
{ .compatible = "rockchip,rk3288-dw-mshc",
|
|
.data = &rk3288_drv_data },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
|
|
|
|
static int dw_mci_rockchip_probe(struct platform_device *pdev)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data;
|
|
const struct of_device_id *match;
|
|
|
|
if (!pdev->dev.of_node)
|
|
return -ENODEV;
|
|
|
|
match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
|
|
drv_data = match->data;
|
|
|
|
return dw_mci_pltfm_register(pdev, drv_data);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int dw_mci_rockchip_suspend(struct device *dev)
|
|
{
|
|
struct dw_mci *host = dev_get_drvdata(dev);
|
|
|
|
return dw_mci_suspend(host);
|
|
}
|
|
|
|
static int dw_mci_rockchip_resume(struct device *dev)
|
|
{
|
|
struct dw_mci *host = dev_get_drvdata(dev);
|
|
|
|
return dw_mci_resume(host);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops,
|
|
dw_mci_rockchip_suspend,
|
|
dw_mci_rockchip_resume);
|
|
|
|
static struct platform_driver dw_mci_rockchip_pltfm_driver = {
|
|
.probe = dw_mci_rockchip_probe,
|
|
.remove = dw_mci_pltfm_remove,
|
|
.driver = {
|
|
.name = "dwmmc_rockchip",
|
|
.of_match_table = dw_mci_rockchip_match,
|
|
.pm = &dw_mci_rockchip_pmops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_mci_rockchip_pltfm_driver);
|
|
|
|
MODULE_AUTHOR("Addy Ke <addy.ke@rock-chips.com>");
|
|
MODULE_DESCRIPTION("Rockchip Specific DW-MSHC Driver Extension");
|
|
MODULE_ALIAS("platform:dwmmc_rockchip");
|
|
MODULE_LICENSE("GPL v2");
|