mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-17 01:04:19 +08:00
396a1a5832
The powerpc version of pci_resource_to_user() and associated hooks used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some time on machines that don't have a 1:1 mapping of devices (basically on non-PowerMacs) and have PCI devices above 32 bits. This attempts to fix it as well as possible. The rule is supposed to be that pci_resource_to_user() always converts the resources back into a BAR values since that's what the /proc interface was supposed to deal with. However, for X to work on platforms where PCI MMIO is not mapped 1:1, it became a habit of platforms like powerpc to pass "fixed up" values there since X expects to be able to use values from /proc/bus/pci/devices as offsets to mmap of /dev/mem... So we keep that contraption here, causing also /sys/*/resource to expose fully absolute MMIO addresses instead of BAR values, which is ugly, but should still work as long as those are only used to calculate alignment within a page. X is still broken when built 32 bits on machines where PCI MMIO can be above 32-bit space unfortunately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
1295 lines
34 KiB
C
1295 lines
34 KiB
C
/*
|
|
* Common prep/chrp pci routines. -- Cort
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
#include <linux/capability.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/bootmem.h>
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/machdep.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#ifdef DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
unsigned long isa_io_base = 0;
|
|
unsigned long isa_mem_base = 0;
|
|
unsigned long pci_dram_offset = 0;
|
|
int pcibios_assign_bus_offset = 1;
|
|
|
|
void pcibios_make_OF_bus_map(void);
|
|
|
|
static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
|
|
static int probe_resource(struct pci_bus *parent, struct resource *pr,
|
|
struct resource *res, struct resource **conflict);
|
|
static void update_bridge_base(struct pci_bus *bus, int i);
|
|
static void pcibios_fixup_resources(struct pci_dev* dev);
|
|
static void fixup_broken_pcnet32(struct pci_dev* dev);
|
|
static int reparent_resources(struct resource *parent, struct resource *res);
|
|
static void fixup_cpc710_pci64(struct pci_dev* dev);
|
|
|
|
/* By default, we don't re-assign bus numbers.
|
|
*/
|
|
int pci_assign_all_buses;
|
|
|
|
struct pci_controller* hose_head;
|
|
struct pci_controller** hose_tail = &hose_head;
|
|
|
|
static int pci_bus_count;
|
|
|
|
static void
|
|
fixup_broken_pcnet32(struct pci_dev* dev)
|
|
{
|
|
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
|
|
dev->vendor = PCI_VENDOR_ID_AMD;
|
|
pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
|
|
|
|
static void
|
|
fixup_cpc710_pci64(struct pci_dev* dev)
|
|
{
|
|
/* Hide the PCI64 BARs from the kernel as their content doesn't
|
|
* fit well in the resource management
|
|
*/
|
|
dev->resource[0].start = dev->resource[0].end = 0;
|
|
dev->resource[0].flags = 0;
|
|
dev->resource[1].start = dev->resource[1].end = 0;
|
|
dev->resource[1].flags = 0;
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
|
|
|
|
static void
|
|
pcibios_fixup_resources(struct pci_dev *dev)
|
|
{
|
|
struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
|
|
int i;
|
|
unsigned long offset;
|
|
|
|
if (!hose) {
|
|
printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
|
|
return;
|
|
}
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
struct resource *res = dev->resource + i;
|
|
if (!res->flags)
|
|
continue;
|
|
if (res->end == 0xffffffff) {
|
|
DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n",
|
|
pci_name(dev), i,
|
|
(unsigned long long)res->start,
|
|
(unsigned long long)res->end);
|
|
res->end -= res->start;
|
|
res->start = 0;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
continue;
|
|
}
|
|
offset = 0;
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
offset = hose->pci_mem_offset;
|
|
} else if (res->flags & IORESOURCE_IO) {
|
|
offset = (unsigned long) hose->io_base_virt
|
|
- isa_io_base;
|
|
}
|
|
if (offset != 0) {
|
|
res->start += offset;
|
|
res->end += offset;
|
|
#ifdef DEBUG
|
|
printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
|
|
i, res->flags, pci_name(dev),
|
|
res->start - offset, res->start);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/* Call machine specific resource fixup */
|
|
if (ppc_md.pcibios_fixup_resources)
|
|
ppc_md.pcibios_fixup_resources(dev);
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
|
|
|
|
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
|
|
struct resource *res)
|
|
{
|
|
unsigned long offset = 0;
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
if (hose && res->flags & IORESOURCE_IO)
|
|
offset = (unsigned long)hose->io_base_virt - isa_io_base;
|
|
else if (hose && res->flags & IORESOURCE_MEM)
|
|
offset = hose->pci_mem_offset;
|
|
region->start = res->start - offset;
|
|
region->end = res->end - offset;
|
|
}
|
|
EXPORT_SYMBOL(pcibios_resource_to_bus);
|
|
|
|
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
|
|
struct pci_bus_region *region)
|
|
{
|
|
unsigned long offset = 0;
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
if (hose && res->flags & IORESOURCE_IO)
|
|
offset = (unsigned long)hose->io_base_virt - isa_io_base;
|
|
else if (hose && res->flags & IORESOURCE_MEM)
|
|
offset = hose->pci_mem_offset;
|
|
res->start = region->start + offset;
|
|
res->end = region->end + offset;
|
|
}
|
|
EXPORT_SYMBOL(pcibios_bus_to_resource);
|
|
|
|
/*
|
|
* We need to avoid collisions with `mirrored' VGA ports
|
|
* and other strange ISA hardware, so we always want the
|
|
* addresses to be allocated in the 0x000-0x0ff region
|
|
* modulo 0x400.
|
|
*
|
|
* Why? Because some silly external IO cards only decode
|
|
* the low 10 bits of the IO address. The 0x00-0xff region
|
|
* is reserved for motherboard devices that decode all 16
|
|
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
|
|
* but we want to try to avoid allocating at 0x2900-0x2bff
|
|
* which might have be mirrored at 0x0100-0x03ff..
|
|
*/
|
|
void pcibios_align_resource(void *data, struct resource *res,
|
|
resource_size_t size, resource_size_t align)
|
|
{
|
|
struct pci_dev *dev = data;
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
resource_size_t start = res->start;
|
|
|
|
if (size > 0x100) {
|
|
printk(KERN_ERR "PCI: I/O Region %s/%d too large"
|
|
" (%lld bytes)\n", pci_name(dev),
|
|
dev->resource - res, (unsigned long long)size);
|
|
}
|
|
|
|
if (start & 0x300) {
|
|
start = (start + 0x3ff) & ~0x3ff;
|
|
res->start = start;
|
|
}
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(pcibios_align_resource);
|
|
|
|
/*
|
|
* Handle resources of PCI devices. If the world were perfect, we could
|
|
* just allocate all the resource regions and do nothing more. It isn't.
|
|
* On the other hand, we cannot just re-allocate all devices, as it would
|
|
* require us to know lots of host bridge internals. So we attempt to
|
|
* keep as much of the original configuration as possible, but tweak it
|
|
* when it's found to be wrong.
|
|
*
|
|
* Known BIOS problems we have to work around:
|
|
* - I/O or memory regions not configured
|
|
* - regions configured, but not enabled in the command register
|
|
* - bogus I/O addresses above 64K used
|
|
* - expansion ROMs left enabled (this may sound harmless, but given
|
|
* the fact the PCI specs explicitly allow address decoders to be
|
|
* shared between expansion ROMs and other resource regions, it's
|
|
* at least dangerous)
|
|
*
|
|
* Our solution:
|
|
* (1) Allocate resources for all buses behind PCI-to-PCI bridges.
|
|
* This gives us fixed barriers on where we can allocate.
|
|
* (2) Allocate resources for all enabled devices. If there is
|
|
* a collision, just mark the resource as unallocated. Also
|
|
* disable expansion ROMs during this step.
|
|
* (3) Try to allocate resources for disabled devices. If the
|
|
* resources were assigned correctly, everything goes well,
|
|
* if they weren't, they won't disturb allocation of other
|
|
* resources.
|
|
* (4) Assign new addresses to resources which were either
|
|
* not configured at all or misconfigured. If explicitly
|
|
* requested by the user, configure expansion ROM address
|
|
* as well.
|
|
*/
|
|
|
|
static void __init
|
|
pcibios_allocate_bus_resources(struct list_head *bus_list)
|
|
{
|
|
struct pci_bus *bus;
|
|
int i;
|
|
struct resource *res, *pr;
|
|
|
|
/* Depth-First Search on bus tree */
|
|
list_for_each_entry(bus, bus_list, node) {
|
|
for (i = 0; i < 4; ++i) {
|
|
if ((res = bus->resource[i]) == NULL || !res->flags
|
|
|| res->start > res->end)
|
|
continue;
|
|
if (bus->parent == NULL)
|
|
pr = (res->flags & IORESOURCE_IO)?
|
|
&ioport_resource: &iomem_resource;
|
|
else {
|
|
pr = pci_find_parent_resource(bus->self, res);
|
|
if (pr == res) {
|
|
/* this happens when the generic PCI
|
|
* code (wrongly) decides that this
|
|
* bridge is transparent -- paulus
|
|
*/
|
|
continue;
|
|
}
|
|
}
|
|
|
|
DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n",
|
|
(unsigned long long)res->start,
|
|
(unsigned long long)res->end, res->flags, pr);
|
|
if (pr) {
|
|
if (request_resource(pr, res) == 0)
|
|
continue;
|
|
/*
|
|
* Must be a conflict with an existing entry.
|
|
* Move that entry (or entries) under the
|
|
* bridge resource and try again.
|
|
*/
|
|
if (reparent_resources(pr, res) == 0)
|
|
continue;
|
|
}
|
|
printk(KERN_ERR "PCI: Cannot allocate resource region "
|
|
"%d of PCI bridge %d\n", i, bus->number);
|
|
if (pci_relocate_bridge_resource(bus, i))
|
|
bus->resource[i] = NULL;
|
|
}
|
|
pcibios_allocate_bus_resources(&bus->children);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reparent resource children of pr that conflict with res
|
|
* under res, and make res replace those children.
|
|
*/
|
|
static int __init
|
|
reparent_resources(struct resource *parent, struct resource *res)
|
|
{
|
|
struct resource *p, **pp;
|
|
struct resource **firstpp = NULL;
|
|
|
|
for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
|
|
if (p->end < res->start)
|
|
continue;
|
|
if (res->end < p->start)
|
|
break;
|
|
if (p->start < res->start || p->end > res->end)
|
|
return -1; /* not completely contained */
|
|
if (firstpp == NULL)
|
|
firstpp = pp;
|
|
}
|
|
if (firstpp == NULL)
|
|
return -1; /* didn't find any conflicting entries? */
|
|
res->parent = parent;
|
|
res->child = *firstpp;
|
|
res->sibling = *pp;
|
|
*firstpp = res;
|
|
*pp = NULL;
|
|
for (p = res->child; p != NULL; p = p->sibling) {
|
|
p->parent = res;
|
|
DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
|
|
p->name, (unsigned long long)p->start,
|
|
(unsigned long long)p->end, res->name);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* A bridge has been allocated a range which is outside the range
|
|
* of its parent bridge, so it needs to be moved.
|
|
*/
|
|
static int __init
|
|
pci_relocate_bridge_resource(struct pci_bus *bus, int i)
|
|
{
|
|
struct resource *res, *pr, *conflict;
|
|
unsigned long try, size;
|
|
int j;
|
|
struct pci_bus *parent = bus->parent;
|
|
|
|
if (parent == NULL) {
|
|
/* shouldn't ever happen */
|
|
printk(KERN_ERR "PCI: can't move host bridge resource\n");
|
|
return -1;
|
|
}
|
|
res = bus->resource[i];
|
|
if (res == NULL)
|
|
return -1;
|
|
pr = NULL;
|
|
for (j = 0; j < 4; j++) {
|
|
struct resource *r = parent->resource[j];
|
|
if (!r)
|
|
continue;
|
|
if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
|
|
continue;
|
|
if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
|
|
pr = r;
|
|
break;
|
|
}
|
|
if (res->flags & IORESOURCE_PREFETCH)
|
|
pr = r;
|
|
}
|
|
if (pr == NULL)
|
|
return -1;
|
|
size = res->end - res->start;
|
|
if (pr->start > pr->end || size > pr->end - pr->start)
|
|
return -1;
|
|
try = pr->end;
|
|
for (;;) {
|
|
res->start = try - size;
|
|
res->end = try;
|
|
if (probe_resource(bus->parent, pr, res, &conflict) == 0)
|
|
break;
|
|
if (conflict->start <= pr->start + size)
|
|
return -1;
|
|
try = conflict->start - 1;
|
|
}
|
|
if (request_resource(pr, res)) {
|
|
DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n",
|
|
(unsigned long long)res->start,
|
|
(unsigned long long)res->end);
|
|
return -1; /* "can't happen" */
|
|
}
|
|
update_bridge_base(bus, i);
|
|
printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n",
|
|
bus->number, i, (unsigned long long)res->start,
|
|
(unsigned long long)res->end);
|
|
return 0;
|
|
}
|
|
|
|
static int __init
|
|
probe_resource(struct pci_bus *parent, struct resource *pr,
|
|
struct resource *res, struct resource **conflict)
|
|
{
|
|
struct pci_bus *bus;
|
|
struct pci_dev *dev;
|
|
struct resource *r;
|
|
int i;
|
|
|
|
for (r = pr->child; r != NULL; r = r->sibling) {
|
|
if (r->end >= res->start && res->end >= r->start) {
|
|
*conflict = r;
|
|
return 1;
|
|
}
|
|
}
|
|
list_for_each_entry(bus, &parent->children, node) {
|
|
for (i = 0; i < 4; ++i) {
|
|
if ((r = bus->resource[i]) == NULL)
|
|
continue;
|
|
if (!r->flags || r->start > r->end || r == res)
|
|
continue;
|
|
if (pci_find_parent_resource(bus->self, r) != pr)
|
|
continue;
|
|
if (r->end >= res->start && res->end >= r->start) {
|
|
*conflict = r;
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
list_for_each_entry(dev, &parent->devices, bus_list) {
|
|
for (i = 0; i < 6; ++i) {
|
|
r = &dev->resource[i];
|
|
if (!r->flags || (r->flags & IORESOURCE_UNSET))
|
|
continue;
|
|
if (pci_find_parent_resource(dev, r) != pr)
|
|
continue;
|
|
if (r->end >= res->start && res->end >= r->start) {
|
|
*conflict = r;
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void __init
|
|
update_bridge_base(struct pci_bus *bus, int i)
|
|
{
|
|
struct resource *res = bus->resource[i];
|
|
u8 io_base_lo, io_limit_lo;
|
|
u16 mem_base, mem_limit;
|
|
u16 cmd;
|
|
unsigned long start, end, off;
|
|
struct pci_dev *dev = bus->self;
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
if (!hose) {
|
|
printk("update_bridge_base: no hose?\n");
|
|
return;
|
|
}
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND,
|
|
cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
|
|
if (res->flags & IORESOURCE_IO) {
|
|
off = (unsigned long) hose->io_base_virt - isa_io_base;
|
|
start = res->start - off;
|
|
end = res->end - off;
|
|
io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
|
|
io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
|
|
if (end > 0xffff) {
|
|
pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
|
|
start >> 16);
|
|
pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
|
|
end >> 16);
|
|
io_base_lo |= PCI_IO_RANGE_TYPE_32;
|
|
} else
|
|
io_base_lo |= PCI_IO_RANGE_TYPE_16;
|
|
pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
|
|
pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
|
|
|
|
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
|
|
== IORESOURCE_MEM) {
|
|
off = hose->pci_mem_offset;
|
|
mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
|
|
mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
|
|
pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
|
|
pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
|
|
|
|
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
|
|
== (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
|
|
off = hose->pci_mem_offset;
|
|
mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
|
|
mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
|
|
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
|
|
pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
|
|
|
|
} else {
|
|
DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
|
|
pci_name(dev), i, res->flags);
|
|
}
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
|
|
static inline void alloc_resource(struct pci_dev *dev, int idx)
|
|
{
|
|
struct resource *pr, *r = &dev->resource[idx];
|
|
|
|
DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n",
|
|
pci_name(dev), idx, (unsigned long long)r->start,
|
|
(unsigned long long)r->end, r->flags);
|
|
pr = pci_find_parent_resource(dev, r);
|
|
if (!pr || request_resource(pr, r) < 0) {
|
|
printk(KERN_ERR "PCI: Cannot allocate resource region %d"
|
|
" of device %s\n", idx, pci_name(dev));
|
|
if (pr)
|
|
DBG("PCI: parent is %p: %016llx-%016llx (f=%lx)\n",
|
|
pr, (unsigned long long)pr->start,
|
|
(unsigned long long)pr->end, pr->flags);
|
|
/* We'll assign a new address later */
|
|
r->flags |= IORESOURCE_UNSET;
|
|
r->end -= r->start;
|
|
r->start = 0;
|
|
}
|
|
}
|
|
|
|
static void __init
|
|
pcibios_allocate_resources(int pass)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
int idx, disabled;
|
|
u16 command;
|
|
struct resource *r;
|
|
|
|
for_each_pci_dev(dev) {
|
|
pci_read_config_word(dev, PCI_COMMAND, &command);
|
|
for (idx = 0; idx < 6; idx++) {
|
|
r = &dev->resource[idx];
|
|
if (r->parent) /* Already allocated */
|
|
continue;
|
|
if (!r->flags || (r->flags & IORESOURCE_UNSET))
|
|
continue; /* Not assigned at all */
|
|
if (r->flags & IORESOURCE_IO)
|
|
disabled = !(command & PCI_COMMAND_IO);
|
|
else
|
|
disabled = !(command & PCI_COMMAND_MEMORY);
|
|
if (pass == disabled)
|
|
alloc_resource(dev, idx);
|
|
}
|
|
if (pass)
|
|
continue;
|
|
r = &dev->resource[PCI_ROM_RESOURCE];
|
|
if (r->flags & IORESOURCE_ROM_ENABLE) {
|
|
/* Turn the ROM off, leave the resource region, but keep it unregistered. */
|
|
u32 reg;
|
|
DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
|
|
r->flags &= ~IORESOURCE_ROM_ENABLE;
|
|
pci_read_config_dword(dev, dev->rom_base_reg, ®);
|
|
pci_write_config_dword(dev, dev->rom_base_reg,
|
|
reg & ~PCI_ROM_ADDRESS_ENABLE);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __init
|
|
pcibios_assign_resources(void)
|
|
{
|
|
struct pci_dev *dev = NULL;
|
|
int idx;
|
|
struct resource *r;
|
|
|
|
for_each_pci_dev(dev) {
|
|
int class = dev->class >> 8;
|
|
|
|
/* Don't touch classless devices and host bridges */
|
|
if (!class || class == PCI_CLASS_BRIDGE_HOST)
|
|
continue;
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
r = &dev->resource[idx];
|
|
|
|
/*
|
|
* We shall assign a new address to this resource,
|
|
* either because the BIOS (sic) forgot to do so
|
|
* or because we have decided the old address was
|
|
* unusable for some reason.
|
|
*/
|
|
if ((r->flags & IORESOURCE_UNSET) && r->end &&
|
|
(!ppc_md.pcibios_enable_device_hook ||
|
|
!ppc_md.pcibios_enable_device_hook(dev, 1))) {
|
|
r->flags &= ~IORESOURCE_UNSET;
|
|
pci_assign_resource(dev, idx);
|
|
}
|
|
}
|
|
|
|
#if 0 /* don't assign ROMs */
|
|
r = &dev->resource[PCI_ROM_RESOURCE];
|
|
r->end -= r->start;
|
|
r->start = 0;
|
|
if (r->end)
|
|
pci_assign_resource(dev, PCI_ROM_RESOURCE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
|
|
int
|
|
pcibios_enable_resources(struct pci_dev *dev, int mask)
|
|
{
|
|
u16 cmd, old_cmd;
|
|
int idx;
|
|
struct resource *r;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
old_cmd = cmd;
|
|
for (idx=0; idx<6; idx++) {
|
|
/* Only set up the requested stuff */
|
|
if (!(mask & (1<<idx)))
|
|
continue;
|
|
|
|
r = &dev->resource[idx];
|
|
if (r->flags & IORESOURCE_UNSET) {
|
|
printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
if (r->flags & IORESOURCE_IO)
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (r->flags & IORESOURCE_MEM)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
}
|
|
if (dev->resource[PCI_ROM_RESOURCE].start)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
if (cmd != old_cmd) {
|
|
printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int next_controller_index;
|
|
|
|
struct pci_controller * __init
|
|
pcibios_alloc_controller(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
|
|
hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
|
|
memset(hose, 0, sizeof(struct pci_controller));
|
|
|
|
*hose_tail = hose;
|
|
hose_tail = &hose->next;
|
|
|
|
hose->index = next_controller_index++;
|
|
|
|
return hose;
|
|
}
|
|
|
|
void pcibios_make_OF_bus_map(void)
|
|
{
|
|
}
|
|
|
|
/* Add sysfs properties */
|
|
void pcibios_add_platform_entries(struct pci_dev *pdev)
|
|
{
|
|
}
|
|
|
|
|
|
static int __init
|
|
pcibios_init(void)
|
|
{
|
|
struct pci_controller *hose;
|
|
struct pci_bus *bus;
|
|
int next_busno;
|
|
|
|
printk(KERN_INFO "PCI: Probing PCI hardware\n");
|
|
|
|
/* Scan all of the recorded PCI controllers. */
|
|
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
|
|
if (pci_assign_all_buses)
|
|
hose->first_busno = next_busno;
|
|
hose->last_busno = 0xff;
|
|
bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
|
|
hose->last_busno = bus->subordinate;
|
|
if (pci_assign_all_buses || next_busno <= hose->last_busno)
|
|
next_busno = hose->last_busno + pcibios_assign_bus_offset;
|
|
}
|
|
pci_bus_count = next_busno;
|
|
|
|
/* OpenFirmware based machines need a map of OF bus
|
|
* numbers vs. kernel bus numbers since we may have to
|
|
* remap them.
|
|
*/
|
|
if (pci_assign_all_buses && have_of)
|
|
pcibios_make_OF_bus_map();
|
|
|
|
/* Do machine dependent PCI interrupt routing */
|
|
if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
|
|
pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
|
|
|
|
/* Call machine dependent fixup */
|
|
if (ppc_md.pcibios_fixup)
|
|
ppc_md.pcibios_fixup();
|
|
|
|
/* Allocate and assign resources */
|
|
pcibios_allocate_bus_resources(&pci_root_buses);
|
|
pcibios_allocate_resources(0);
|
|
pcibios_allocate_resources(1);
|
|
pcibios_assign_resources();
|
|
|
|
/* Call machine dependent post-init code */
|
|
if (ppc_md.pcibios_after_init)
|
|
ppc_md.pcibios_after_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(pcibios_init);
|
|
|
|
unsigned char __init
|
|
common_swizzle(struct pci_dev *dev, unsigned char *pinp)
|
|
{
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
if (dev->bus->number != hose->first_busno) {
|
|
u8 pin = *pinp;
|
|
do {
|
|
pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
|
|
/* Move up the chain of bridges. */
|
|
dev = dev->bus->self;
|
|
} while (dev->bus->self);
|
|
*pinp = pin;
|
|
|
|
/* The slot is the idsel of the last bridge. */
|
|
}
|
|
return PCI_SLOT(dev->devfn);
|
|
}
|
|
|
|
unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
|
|
unsigned long start, unsigned long size)
|
|
{
|
|
return start;
|
|
}
|
|
|
|
void __init pcibios_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
|
unsigned long io_offset;
|
|
struct resource *res;
|
|
int i;
|
|
|
|
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
|
|
if (bus->parent == NULL) {
|
|
/* This is a host bridge - fill in its resources */
|
|
hose->bus = bus;
|
|
|
|
bus->resource[0] = res = &hose->io_resource;
|
|
if (!res->flags) {
|
|
if (io_offset)
|
|
printk(KERN_ERR "I/O resource not set for host"
|
|
" bridge %d\n", hose->index);
|
|
res->start = 0;
|
|
res->end = IO_SPACE_LIMIT;
|
|
res->flags = IORESOURCE_IO;
|
|
}
|
|
res->start += io_offset;
|
|
res->end += io_offset;
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
res = &hose->mem_resources[i];
|
|
if (!res->flags) {
|
|
if (i > 0)
|
|
continue;
|
|
printk(KERN_ERR "Memory resource not set for "
|
|
"host bridge %d\n", hose->index);
|
|
res->start = hose->pci_mem_offset;
|
|
res->end = ~0U;
|
|
res->flags = IORESOURCE_MEM;
|
|
}
|
|
bus->resource[i+1] = res;
|
|
}
|
|
} else {
|
|
/* This is a subordinate bridge */
|
|
pci_read_bridge_bases(bus);
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
if ((res = bus->resource[i]) == NULL)
|
|
continue;
|
|
if (!res->flags)
|
|
continue;
|
|
if (io_offset && (res->flags & IORESOURCE_IO)) {
|
|
res->start += io_offset;
|
|
res->end += io_offset;
|
|
} else if (hose->pci_mem_offset
|
|
&& (res->flags & IORESOURCE_MEM)) {
|
|
res->start += hose->pci_mem_offset;
|
|
res->end += hose->pci_mem_offset;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (ppc_md.pcibios_fixup_bus)
|
|
ppc_md.pcibios_fixup_bus(bus);
|
|
}
|
|
|
|
char __init *pcibios_setup(char *str)
|
|
{
|
|
return str;
|
|
}
|
|
|
|
/* the next one is stolen from the alpha port... */
|
|
void __init
|
|
pcibios_update_irq(struct pci_dev *dev, int irq)
|
|
{
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
|
|
/* XXX FIXME - update OF device tree node interrupt property */
|
|
}
|
|
|
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
|
{
|
|
u16 cmd, old_cmd;
|
|
int idx;
|
|
struct resource *r;
|
|
|
|
if (ppc_md.pcibios_enable_device_hook)
|
|
if (ppc_md.pcibios_enable_device_hook(dev, 0))
|
|
return -EINVAL;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
old_cmd = cmd;
|
|
for (idx=0; idx<6; idx++) {
|
|
r = &dev->resource[idx];
|
|
if (r->flags & IORESOURCE_UNSET) {
|
|
printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
if (r->flags & IORESOURCE_IO)
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (r->flags & IORESOURCE_MEM)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
}
|
|
if (cmd != old_cmd) {
|
|
printk("PCI: Enabling device %s (%04x -> %04x)\n",
|
|
pci_name(dev), old_cmd, cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
struct pci_controller*
|
|
pci_bus_to_hose(int bus)
|
|
{
|
|
struct pci_controller* hose = hose_head;
|
|
|
|
for (; hose; hose = hose->next)
|
|
if (bus >= hose->first_busno && bus <= hose->last_busno)
|
|
return hose;
|
|
return NULL;
|
|
}
|
|
|
|
void __iomem *
|
|
pci_bus_io_base(unsigned int bus)
|
|
{
|
|
struct pci_controller *hose;
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
if (!hose)
|
|
return NULL;
|
|
return hose->io_base_virt;
|
|
}
|
|
|
|
unsigned long
|
|
pci_bus_io_base_phys(unsigned int bus)
|
|
{
|
|
struct pci_controller *hose;
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
if (!hose)
|
|
return 0;
|
|
return hose->io_base_phys;
|
|
}
|
|
|
|
unsigned long
|
|
pci_bus_mem_base_phys(unsigned int bus)
|
|
{
|
|
struct pci_controller *hose;
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
if (!hose)
|
|
return 0;
|
|
return hose->pci_mem_offset;
|
|
}
|
|
|
|
unsigned long
|
|
pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
|
|
{
|
|
/* Hack alert again ! See comments in chrp_pci.c
|
|
*/
|
|
struct pci_controller* hose =
|
|
(struct pci_controller *)pdev->sysdata;
|
|
if (hose && res->flags & IORESOURCE_MEM)
|
|
return res->start - hose->pci_mem_offset;
|
|
/* We may want to do something with IOs here... */
|
|
return res->start;
|
|
}
|
|
|
|
|
|
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
|
|
resource_size_t *offset,
|
|
enum pci_mmap_state mmap_state)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
|
unsigned long io_offset = 0;
|
|
int i, res_bit;
|
|
|
|
if (hose == 0)
|
|
return NULL; /* should never happen */
|
|
|
|
/* If memory, add on the PCI bridge address offset */
|
|
if (mmap_state == pci_mmap_mem) {
|
|
#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
|
|
*offset += hose->pci_mem_offset;
|
|
#endif
|
|
res_bit = IORESOURCE_MEM;
|
|
} else {
|
|
io_offset = hose->io_base_virt - ___IO_BASE;
|
|
*offset += io_offset;
|
|
res_bit = IORESOURCE_IO;
|
|
}
|
|
|
|
/*
|
|
* Check that the offset requested corresponds to one of the
|
|
* resources of the device.
|
|
*/
|
|
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
|
|
struct resource *rp = &dev->resource[i];
|
|
int flags = rp->flags;
|
|
|
|
/* treat ROM as memory (should be already) */
|
|
if (i == PCI_ROM_RESOURCE)
|
|
flags |= IORESOURCE_MEM;
|
|
|
|
/* Active and same type? */
|
|
if ((flags & res_bit) == 0)
|
|
continue;
|
|
|
|
/* In the range of this resource? */
|
|
if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
|
|
continue;
|
|
|
|
/* found it! construct the final physical address */
|
|
if (mmap_state == pci_mmap_io)
|
|
*offset += hose->io_base_phys - io_offset;
|
|
return rp;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
|
|
* device mapping.
|
|
*/
|
|
static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
|
|
pgprot_t protection,
|
|
enum pci_mmap_state mmap_state,
|
|
int write_combine)
|
|
{
|
|
unsigned long prot = pgprot_val(protection);
|
|
|
|
/* Write combine is always 0 on non-memory space mappings. On
|
|
* memory space, if the user didn't pass 1, we check for a
|
|
* "prefetchable" resource. This is a bit hackish, but we use
|
|
* this to workaround the inability of /sysfs to provide a write
|
|
* combine bit
|
|
*/
|
|
if (mmap_state != pci_mmap_mem)
|
|
write_combine = 0;
|
|
else if (write_combine == 0) {
|
|
if (rp->flags & IORESOURCE_PREFETCH)
|
|
write_combine = 1;
|
|
}
|
|
|
|
/* XXX would be nice to have a way to ask for write-through */
|
|
prot |= _PAGE_NO_CACHE;
|
|
if (write_combine)
|
|
prot &= ~_PAGE_GUARDED;
|
|
else
|
|
prot |= _PAGE_GUARDED;
|
|
|
|
printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
|
|
(unsigned long long)rp->start, prot);
|
|
|
|
return __pgprot(prot);
|
|
}
|
|
|
|
/*
|
|
* This one is used by /dev/mem and fbdev who have no clue about the
|
|
* PCI device, it tries to find the PCI device first and calls the
|
|
* above routine
|
|
*/
|
|
pgprot_t pci_phys_mem_access_prot(struct file *file,
|
|
unsigned long pfn,
|
|
unsigned long size,
|
|
pgprot_t protection)
|
|
{
|
|
struct pci_dev *pdev = NULL;
|
|
struct resource *found = NULL;
|
|
unsigned long prot = pgprot_val(protection);
|
|
unsigned long offset = pfn << PAGE_SHIFT;
|
|
int i;
|
|
|
|
if (page_is_ram(pfn))
|
|
return prot;
|
|
|
|
prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
|
|
|
|
for_each_pci_dev(pdev) {
|
|
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
|
|
struct resource *rp = &pdev->resource[i];
|
|
int flags = rp->flags;
|
|
|
|
/* Active and same type? */
|
|
if ((flags & IORESOURCE_MEM) == 0)
|
|
continue;
|
|
/* In the range of this resource? */
|
|
if (offset < (rp->start & PAGE_MASK) ||
|
|
offset > rp->end)
|
|
continue;
|
|
found = rp;
|
|
break;
|
|
}
|
|
if (found)
|
|
break;
|
|
}
|
|
if (found) {
|
|
if (found->flags & IORESOURCE_PREFETCH)
|
|
prot &= ~_PAGE_GUARDED;
|
|
pci_dev_put(pdev);
|
|
}
|
|
|
|
DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
|
|
|
|
return __pgprot(prot);
|
|
}
|
|
|
|
|
|
/*
|
|
* Perform the actual remap of the pages for a PCI device mapping, as
|
|
* appropriate for this architecture. The region in the process to map
|
|
* is described by vm_start and vm_end members of VMA, the base physical
|
|
* address is found in vm_pgoff.
|
|
* The pci device structure is provided so that architectures may make mapping
|
|
* decisions on a per-device or per-bus basis.
|
|
*
|
|
* Returns a negative error code on failure, zero on success.
|
|
*/
|
|
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
|
|
enum pci_mmap_state mmap_state,
|
|
int write_combine)
|
|
{
|
|
resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
|
|
struct resource *rp;
|
|
int ret;
|
|
|
|
rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
|
|
if (rp == NULL)
|
|
return -EINVAL;
|
|
|
|
vma->vm_pgoff = offset >> PAGE_SHIFT;
|
|
vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
|
|
vma->vm_page_prot,
|
|
mmap_state, write_combine);
|
|
|
|
ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
|
|
vma->vm_end - vma->vm_start, vma->vm_page_prot);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Obsolete functions. Should be removed once the symbios driver
|
|
* is fixed
|
|
*/
|
|
unsigned long
|
|
phys_to_bus(unsigned long pa)
|
|
{
|
|
struct pci_controller *hose;
|
|
int i;
|
|
|
|
for (hose = hose_head; hose; hose = hose->next) {
|
|
for (i = 0; i < 3; ++i) {
|
|
if (pa >= hose->mem_resources[i].start
|
|
&& pa <= hose->mem_resources[i].end) {
|
|
/*
|
|
* XXX the hose->pci_mem_offset really
|
|
* only applies to mem_resources[0].
|
|
* We need a way to store an offset for
|
|
* the others. -- paulus
|
|
*/
|
|
if (i == 0)
|
|
pa -= hose->pci_mem_offset;
|
|
return pa;
|
|
}
|
|
}
|
|
}
|
|
/* hmmm, didn't find it */
|
|
return 0;
|
|
}
|
|
|
|
unsigned long
|
|
pci_phys_to_bus(unsigned long pa, int busnr)
|
|
{
|
|
struct pci_controller* hose = pci_bus_to_hose(busnr);
|
|
if (!hose)
|
|
return pa;
|
|
return pa - hose->pci_mem_offset;
|
|
}
|
|
|
|
unsigned long
|
|
pci_bus_to_phys(unsigned int ba, int busnr)
|
|
{
|
|
struct pci_controller* hose = pci_bus_to_hose(busnr);
|
|
if (!hose)
|
|
return ba;
|
|
return ba + hose->pci_mem_offset;
|
|
}
|
|
|
|
/* Provide information on locations of various I/O regions in physical
|
|
* memory. Do this on a per-card basis so that we choose the right
|
|
* root bridge.
|
|
* Note that the returned IO or memory base is a physical address
|
|
*/
|
|
|
|
long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
|
|
{
|
|
struct pci_controller* hose;
|
|
long result = -EOPNOTSUPP;
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
if (!hose)
|
|
return -ENODEV;
|
|
|
|
switch (which) {
|
|
case IOBASE_BRIDGE_NUMBER:
|
|
return (long)hose->first_busno;
|
|
case IOBASE_MEMORY:
|
|
return (long)hose->pci_mem_offset;
|
|
case IOBASE_IO:
|
|
return (long)hose->io_base_phys;
|
|
case IOBASE_ISA_IO:
|
|
return (long)isa_io_base;
|
|
case IOBASE_ISA_MEM:
|
|
return (long)isa_mem_base;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
void pci_resource_to_user(const struct pci_dev *dev, int bar,
|
|
const struct resource *rsrc,
|
|
resource_size_t *start, resource_size_t *end)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
|
resource_size_t offset = 0;
|
|
|
|
if (hose == NULL)
|
|
return;
|
|
|
|
if (rsrc->flags & IORESOURCE_IO)
|
|
offset = (unsigned long)hose->io_base_virt - _IO_BASE;
|
|
|
|
/* We pass a fully fixed up address to userland for MMIO instead of
|
|
* a BAR value because X is lame and expects to be able to use that
|
|
* to pass to /dev/mem !
|
|
*
|
|
* That means that we'll have potentially 64 bits values where some
|
|
* userland apps only expect 32 (like X itself since it thinks only
|
|
* Sparc has 64 bits MMIO) but if we don't do that, we break it on
|
|
* 32 bits CHRPs :-(
|
|
*
|
|
* Hopefully, the sysfs insterface is immune to that gunk. Once X
|
|
* has been fixed (and the fix spread enough), we can re-enable the
|
|
* 2 lines below and pass down a BAR value to userland. In that case
|
|
* we'll also have to re-enable the matching code in
|
|
* __pci_mmap_make_offset().
|
|
*
|
|
* BenH.
|
|
*/
|
|
#if 0
|
|
else if (rsrc->flags & IORESOURCE_MEM)
|
|
offset = hose->pci_mem_offset;
|
|
#endif
|
|
|
|
*start = rsrc->start - offset;
|
|
*end = rsrc->end - offset;
|
|
}
|
|
|
|
void __init pci_init_resource(struct resource *res, resource_size_t start,
|
|
resource_size_t end, int flags, char *name)
|
|
{
|
|
res->start = start;
|
|
res->end = end;
|
|
res->flags = flags;
|
|
res->name = name;
|
|
res->parent = NULL;
|
|
res->sibling = NULL;
|
|
res->child = NULL;
|
|
}
|
|
|
|
void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
|
|
{
|
|
unsigned long start = pci_resource_start(dev, bar);
|
|
unsigned long len = pci_resource_len(dev, bar);
|
|
unsigned long flags = pci_resource_flags(dev, bar);
|
|
|
|
if (!len)
|
|
return NULL;
|
|
if (max && len > max)
|
|
len = max;
|
|
if (flags & IORESOURCE_IO)
|
|
return ioport_map(start, len);
|
|
if (flags & IORESOURCE_MEM)
|
|
/* Not checking IORESOURCE_CACHEABLE because PPC does
|
|
* not currently distinguish between ioremap and
|
|
* ioremap_nocache.
|
|
*/
|
|
return ioremap(start, len);
|
|
/* What? */
|
|
return NULL;
|
|
}
|
|
|
|
void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
EXPORT_SYMBOL(pci_iomap);
|
|
EXPORT_SYMBOL(pci_iounmap);
|
|
|
|
unsigned long pci_address_to_pio(phys_addr_t address)
|
|
{
|
|
struct pci_controller* hose = hose_head;
|
|
|
|
for (; hose; hose = hose->next) {
|
|
unsigned int size = hose->io_resource.end -
|
|
hose->io_resource.start + 1;
|
|
if (address >= hose->io_base_phys &&
|
|
address < (hose->io_base_phys + size)) {
|
|
unsigned long base =
|
|
(unsigned long)hose->io_base_virt - _IO_BASE;
|
|
return base + (address - hose->io_base_phys);
|
|
}
|
|
}
|
|
return (unsigned int)-1;
|
|
}
|
|
EXPORT_SYMBOL(pci_address_to_pio);
|
|
|
|
/*
|
|
* Null PCI config access functions, for the case when we can't
|
|
* find a hose.
|
|
*/
|
|
#define NULL_PCI_OP(rw, size, type) \
|
|
static int \
|
|
null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
|
|
{ \
|
|
return PCIBIOS_DEVICE_NOT_FOUND; \
|
|
}
|
|
|
|
static int
|
|
null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
int len, u32 *val)
|
|
{
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
static int
|
|
null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
int len, u32 val)
|
|
{
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
static struct pci_ops null_pci_ops =
|
|
{
|
|
null_read_config,
|
|
null_write_config
|
|
};
|
|
|
|
/*
|
|
* These functions are used early on before PCI scanning is done
|
|
* and all of the pci_dev and pci_bus structures have been created.
|
|
*/
|
|
static struct pci_bus *
|
|
fake_pci_bus(struct pci_controller *hose, int busnr)
|
|
{
|
|
static struct pci_bus bus;
|
|
|
|
if (hose == 0) {
|
|
hose = pci_bus_to_hose(busnr);
|
|
if (hose == 0)
|
|
printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
|
|
}
|
|
bus.number = busnr;
|
|
bus.sysdata = hose;
|
|
bus.ops = hose? hose->ops: &null_pci_ops;
|
|
return &bus;
|
|
}
|
|
|
|
#define EARLY_PCI_OP(rw, size, type) \
|
|
int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
|
|
int devfn, int offset, type value) \
|
|
{ \
|
|
return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
|
|
devfn, offset, value); \
|
|
}
|
|
|
|
EARLY_PCI_OP(read, byte, u8 *)
|
|
EARLY_PCI_OP(read, word, u16 *)
|
|
EARLY_PCI_OP(read, dword, u32 *)
|
|
EARLY_PCI_OP(write, byte, u8)
|
|
EARLY_PCI_OP(write, word, u16)
|
|
EARLY_PCI_OP(write, dword, u32)
|