linux/arch/x86/kvm
Linus Torvalds 49d5759268 ARM:
- Provide a virtual cache topology to the guest to avoid
   inconsistencies with migration on heterogenous systems. Non secure
   software has no practical need to traverse the caches by set/way in
   the first place.
 
 - Add support for taking stage-2 access faults in parallel. This was an
   accidental omission in the original parallel faults implementation,
   but should provide a marginal improvement to machines w/o FEAT_HAFDBS
   (such as hardware from the fruit company).
 
 - A preamble to adding support for nested virtualization to KVM,
   including vEL2 register state, rudimentary nested exception handling
   and masking unsupported features for nested guests.
 
 - Fixes to the PSCI relay that avoid an unexpected host SVE trap when
   resuming a CPU when running pKVM.
 
 - VGIC maintenance interrupt support for the AIC
 
 - Improvements to the arch timer emulation, primarily aimed at reducing
   the trap overhead of running nested.
 
 - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
   interest of CI systems.
 
 - Avoid VM-wide stop-the-world operations when a vCPU accesses its own
   redistributor.
 
 - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions
   in the host.
 
 - Aesthetic and comment/kerneldoc fixes
 
 - Drop the vestiges of the old Columbia mailing list and add [Oliver]
   as co-maintainer
 
 This also drags in arm64's 'for-next/sme2' branch, because both it and
 the PSCI relay changes touch the EL2 initialization code.
 
 RISC-V:
 
 - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE
 
 - Correctly place the guest in S-mode after redirecting a trap to the guest
 
 - Redirect illegal instruction traps to guest
 
 - SBI PMU support for guest
 
 s390:
 
 - Two patches sorting out confusion between virtual and physical
   addresses, which currently are the same on s390.
 
 - A new ioctl that performs cmpxchg on guest memory
 
 - A few fixes
 
 x86:
 
 - Change tdp_mmu to a read-only parameter
 
 - Separate TDP and shadow MMU page fault paths
 
 - Enable Hyper-V invariant TSC control
 
 - Fix a variety of APICv and AVIC bugs, some of them real-world,
   some of them affecting architecurally legal but unlikely to
   happen in practice
 
 - Mark APIC timer as expired if its in one-shot mode and the count
   underflows while the vCPU task was being migrated
 
 - Advertise support for Intel's new fast REP string features
 
 - Fix a double-shootdown issue in the emergency reboot code
 
 - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM
   similar treatment to VMX
 
 - Update Xen's TSC info CPUID sub-leaves as appropriate
 
 - Add support for Hyper-V's extended hypercalls, where "support" at this
   point is just forwarding the hypercalls to userspace
 
 - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and
   MSR filters
 
 - One-off fixes and cleanups
 
 - Fix and cleanup the range-based TLB flushing code, used when KVM is
   running on Hyper-V
 
 - Add support for filtering PMU events using a mask.  If userspace
   wants to restrict heavily what events the guest can use, it can now
   do so without needing an absurd number of filter entries
 
 - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
   support is disabled
 
 - Add PEBS support for Intel Sapphire Rapids
 
 - Fix a mostly benign overflow bug in SEV's send|receive_update_data()
 
 - Move several SVM-specific flags into vcpu_svm
 
 x86 Intel:
 
 - Handle NMI VM-Exits before leaving the noinstr region
 
 - A few trivial cleanups in the VM-Enter flows
 
 - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support
   EPTP switching (or any other VM function) for L1
 
 - Fix a crash when using eVMCS's enlighted MSR bitmaps
 
 Generic:
 
 - Clean up the hardware enable and initialization flow, which was
   scattered around multiple arch-specific hooks.  Instead, just
   let the arch code call into generic code.  Both x86 and ARM should
   benefit from not having to fight common KVM code's notion of how
   to do initialization.
 
 - Account allocations in generic kvm_arch_alloc_vm()
 
 - Fix a memory leak if coalesced MMIO unregistration fails
 
 selftests:
 
 - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit
   the correct hypercall instruction instead of relying on KVM to patch
   in VMMCALL
 
 - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmP2YA0UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg/Qf+J6nT+TkIa+8Ei+fN1oMTDp4YuIOx
 mXvJ9mRK9sQ+tAUVwvDz3qN/fK5mjsYbRHIDlVc5p2Q3bCrVGDDqXPFfCcLx1u+O
 9U9xjkO4JxD2LS9pc70FYOyzVNeJ8VMGOBbC2b0lkdYZ4KnUc6e/WWFKJs96bK+H
 duo+RIVyaMthnvbTwSv1K3qQb61n6lSJXplywS8KWFK6NZAmBiEFDAWGRYQE9lLs
 VcVcG0iDJNL/BQJ5InKCcvXVGskcCm9erDszPo7w4Bypa4S9AMS42DHUaRZrBJwV
 /WqdH7ckIz7+OSV0W1j+bKTHAFVTCjXYOM7wQykgjawjICzMSnnG9Gpskw==
 =goe1
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "ARM:

   - Provide a virtual cache topology to the guest to avoid
     inconsistencies with migration on heterogenous systems. Non secure
     software has no practical need to traverse the caches by set/way in
     the first place

   - Add support for taking stage-2 access faults in parallel. This was
     an accidental omission in the original parallel faults
     implementation, but should provide a marginal improvement to
     machines w/o FEAT_HAFDBS (such as hardware from the fruit company)

   - A preamble to adding support for nested virtualization to KVM,
     including vEL2 register state, rudimentary nested exception
     handling and masking unsupported features for nested guests

   - Fixes to the PSCI relay that avoid an unexpected host SVE trap when
     resuming a CPU when running pKVM

   - VGIC maintenance interrupt support for the AIC

   - Improvements to the arch timer emulation, primarily aimed at
     reducing the trap overhead of running nested

   - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the
     interest of CI systems

   - Avoid VM-wide stop-the-world operations when a vCPU accesses its
     own redistributor

   - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected
     exceptions in the host

   - Aesthetic and comment/kerneldoc fixes

   - Drop the vestiges of the old Columbia mailing list and add [Oliver]
     as co-maintainer

  RISC-V:

   - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE

   - Correctly place the guest in S-mode after redirecting a trap to the
     guest

   - Redirect illegal instruction traps to guest

   - SBI PMU support for guest

  s390:

   - Sort out confusion between virtual and physical addresses, which
     currently are the same on s390

   - A new ioctl that performs cmpxchg on guest memory

   - A few fixes

  x86:

   - Change tdp_mmu to a read-only parameter

   - Separate TDP and shadow MMU page fault paths

   - Enable Hyper-V invariant TSC control

   - Fix a variety of APICv and AVIC bugs, some of them real-world, some
     of them affecting architecurally legal but unlikely to happen in
     practice

   - Mark APIC timer as expired if its in one-shot mode and the count
     underflows while the vCPU task was being migrated

   - Advertise support for Intel's new fast REP string features

   - Fix a double-shootdown issue in the emergency reboot code

   - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give
     SVM similar treatment to VMX

   - Update Xen's TSC info CPUID sub-leaves as appropriate

   - Add support for Hyper-V's extended hypercalls, where "support" at
     this point is just forwarding the hypercalls to userspace

   - Clean up the kvm->lock vs. kvm->srcu sequences when updating the
     PMU and MSR filters

   - One-off fixes and cleanups

   - Fix and cleanup the range-based TLB flushing code, used when KVM is
     running on Hyper-V

   - Add support for filtering PMU events using a mask. If userspace
     wants to restrict heavily what events the guest can use, it can now
     do so without needing an absurd number of filter entries

   - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU
     support is disabled

   - Add PEBS support for Intel Sapphire Rapids

   - Fix a mostly benign overflow bug in SEV's
     send|receive_update_data()

   - Move several SVM-specific flags into vcpu_svm

  x86 Intel:

   - Handle NMI VM-Exits before leaving the noinstr region

   - A few trivial cleanups in the VM-Enter flows

   - Stop enabling VMFUNC for L1 purely to document that KVM doesn't
     support EPTP switching (or any other VM function) for L1

   - Fix a crash when using eVMCS's enlighted MSR bitmaps

  Generic:

   - Clean up the hardware enable and initialization flow, which was
     scattered around multiple arch-specific hooks. Instead, just let
     the arch code call into generic code. Both x86 and ARM should
     benefit from not having to fight common KVM code's notion of how to
     do initialization

   - Account allocations in generic kvm_arch_alloc_vm()

   - Fix a memory leak if coalesced MMIO unregistration fails

  selftests:

   - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to
     emit the correct hypercall instruction instead of relying on KVM to
     patch in VMMCALL

   - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits)
  KVM: SVM: hyper-v: placate modpost section mismatch error
  KVM: x86/mmu: Make tdp_mmu_allowed static
  KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID
  KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes
  KVM: arm64: nv: Filter out unsupported features from ID regs
  KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2
  KVM: arm64: nv: Allow a sysreg to be hidden from userspace only
  KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor
  KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2
  KVM: arm64: nv: Handle SMCs taken from virtual EL2
  KVM: arm64: nv: Handle trapped ERET from virtual EL2
  KVM: arm64: nv: Inject HVC exceptions to the virtual EL2
  KVM: arm64: nv: Support virtual EL2 exceptions
  KVM: arm64: nv: Handle HCR_EL2.NV system register traps
  KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state
  KVM: arm64: nv: Add EL2 system registers to vcpu context
  KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x
  KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set
  KVM: arm64: nv: Introduce nested virtualization VCPU feature
  KVM: arm64: Use the S2 MMU context to iterate over S2 table
  ...
2023-02-25 11:30:21 -08:00
..
mmu KVM: x86/mmu: Make tdp_mmu_allowed static 2023-02-16 12:29:50 -05:00
svm ARM: 2023-02-25 11:30:21 -08:00
vmx KVM x86 APIC changes for 6.3: 2023-02-21 20:00:44 -05:00
.gitignore KVM: x86: use a separate asm-offsets.c file 2022-11-09 12:10:17 -05:00
cpuid.c ARM: 2023-02-25 11:30:21 -08:00
cpuid.h KVM: x86: Add dedicated helper to get CPUID entry with significant index 2022-07-14 11:38:32 -04:00
debugfs.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
emulate.c ARM: 2023-02-25 11:30:21 -08:00
fpu.h KVM: x86: Move FPU register accessors into fpu.h 2021-06-17 13:09:24 -04:00
hyperv.c KVM x86 PMU changes for 6.3: 2023-02-15 08:23:24 -05:00
hyperv.h KVM: x86: Hyper-V invariant TSC control 2022-12-29 15:33:29 -05:00
i8254.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
i8254.h KVM: x86: PIT: Preserve state of speaker port data bit 2022-06-08 13:06:20 -04:00
i8259.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
ioapic.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
ioapic.h x86/kvm: remove unused ack_notifier callbacks 2021-11-18 07:05:57 -05:00
irq_comm.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
irq.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
irq.h x86/kvm: remove unused ack_notifier callbacks 2021-11-18 07:05:57 -05:00
Kconfig KVM: Opt out of generic hardware enabling on s390 and PPC 2022-12-29 15:48:37 -05:00
kvm_cache_regs.h KVM: x86: Make vmx_get_exit_qual() and vmx_get_intr_info() noinstr-friendly 2023-01-24 10:35:38 -08:00
kvm_emulate.h KVM: x86: Use emulator callbacks instead of duplicating "host flags" 2023-01-31 17:29:09 -08:00
kvm_onhyperv.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
kvm_onhyperv.h KVM: x86: Uninline and export hv_track_root_tdp() 2022-02-10 13:47:19 -05:00
kvm-asm-offsets.c KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assembly 2022-11-09 12:25:53 -05:00
lapic.c KVM: x86: Reinitialize xAPIC ID when userspace forces x2APIC => xAPIC 2023-02-01 15:37:13 -08:00
lapic.h KVM: x86: Split out logic to generate "readable" APIC regs mask to helper 2023-01-24 10:04:35 -08:00
Makefile KVM: x86: Introduce .hv_inject_synthetic_vmexit_post_tlb_flush() nested hook 2022-11-18 12:59:13 -05:00
mmu.h KVM: x86/mmu: Change tdp_mmu to a read-only parameter 2022-12-29 15:33:16 -05:00
mtrr.c KVM: x86: Unify pr_fmt to use module name for all KVM modules 2022-12-29 15:47:35 -05:00
pmu.c KVM x86 PMU changes for 6.3: 2023-02-15 08:23:24 -05:00
pmu.h ARM: 2023-02-25 11:30:21 -08:00
reverse_cpuid.h ARM: 2023-02-25 11:30:21 -08:00
smm.c KVM: x86: Use emulator callbacks instead of duplicating "host flags" 2023-01-31 17:29:09 -08:00
smm.h KVM: x86: smm: preserve interrupt shadow in SMRAM 2022-11-09 12:31:26 -05:00
trace.h KVM: x86/xen: Add CPL to Xen hypercall tracepoint 2022-11-28 13:31:01 -05:00
tss.h
x86.c ARM: 2023-02-25 11:30:21 -08:00
x86.h KVM VMX changes for 6.3: 2023-02-15 12:23:19 -05:00
xen.c KVM: x86/xen: update Xen CPUID Leaf 4 (tsc info) sub-leaves, if present 2023-01-24 10:05:20 -08:00
xen.h KVM: x86/xen: update Xen CPUID Leaf 4 (tsc info) sub-leaves, if present 2023-01-24 10:05:20 -08:00