korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-27 14:14:24 +08:00
Code Issues Packages Projects Releases Wiki Activity
565d121b69
linux/drivers/mfd/ti_am335x_tscadc.c
Luca Ceresoli 9722c3b66e of: remove internal arguments from of_property_for_each_u32() 
The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

  struct property *prop;
  const __be32 *p;
  u32 val;

  of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

  u32 val;

  of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

 - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
 - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
   checks had to be replicated in a different way, making code more verbose
   and somewhat uglier, but I refrained from a full rework to keep as much
   of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara <andre.przywara@arm.com> # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner <richard.leitner@linux.dev> # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown <broonie@kernel.org> # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd <sboyd@kernel.org> # clk
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2024-07-25 06:53:47 -05:00

389 lines
10 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* TI Touch Screen / ADC MFD driver
*
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/regmap.h>
#include <linux/mfd/core.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/mfd/ti_am335x_tscadc.h>
static const struct regmap_config tscadc_regmap_config = {
.name = "ti_tscadc",
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
};
void am335x_tsc_se_set_cache(struct ti_tscadc_dev *tscadc, u32 val)
{
unsigned long flags;
spin_lock_irqsave(&tscadc->reg_lock, flags);
tscadc->reg_se_cache |= val;
if (tscadc->adc_waiting)
wake_up(&tscadc->reg_se_wait);
else if (!tscadc->adc_in_use)
regmap_write(tscadc->regmap, REG_SE, tscadc->reg_se_cache);
spin_unlock_irqrestore(&tscadc->reg_lock, flags);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_set_cache);
static void am335x_tscadc_need_adc(struct ti_tscadc_dev *tscadc)
{
DEFINE_WAIT(wait);
u32 reg;
regmap_read(tscadc->regmap, REG_ADCFSM, &reg);
if (reg & SEQ_STATUS) {
tscadc->adc_waiting = true;
prepare_to_wait(&tscadc->reg_se_wait, &wait,
TASK_UNINTERRUPTIBLE);
spin_unlock_irq(&tscadc->reg_lock);
schedule();
spin_lock_irq(&tscadc->reg_lock);
finish_wait(&tscadc->reg_se_wait, &wait);
/*
* Sequencer should either be idle or
* busy applying the charge step.
*/
regmap_read(tscadc->regmap, REG_ADCFSM, &reg);
WARN_ON((reg & SEQ_STATUS) && !(reg & CHARGE_STEP));
tscadc->adc_waiting = false;
}
tscadc->adc_in_use = true;
}
void am335x_tsc_se_set_once(struct ti_tscadc_dev *tscadc, u32 val)
{
spin_lock_irq(&tscadc->reg_lock);
am335x_tscadc_need_adc(tscadc);
regmap_write(tscadc->regmap, REG_SE, val);
spin_unlock_irq(&tscadc->reg_lock);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_set_once);
void am335x_tsc_se_adc_done(struct ti_tscadc_dev *tscadc)
{
unsigned long flags;
spin_lock_irqsave(&tscadc->reg_lock, flags);
tscadc->adc_in_use = false;
regmap_write(tscadc->regmap, REG_SE, tscadc->reg_se_cache);
spin_unlock_irqrestore(&tscadc->reg_lock, flags);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_adc_done);
void am335x_tsc_se_clr(struct ti_tscadc_dev *tscadc, u32 val)
{
unsigned long flags;
spin_lock_irqsave(&tscadc->reg_lock, flags);
tscadc->reg_se_cache &= ~val;
regmap_write(tscadc->regmap, REG_SE, tscadc->reg_se_cache);
spin_unlock_irqrestore(&tscadc->reg_lock, flags);
}
EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
static void tscadc_idle_config(struct ti_tscadc_dev *tscadc)
{
unsigned int idleconfig;
idleconfig = STEPCONFIG_INM_ADCREFM | STEPCONFIG_INP_ADCREFM;
if (ti_adc_with_touchscreen(tscadc))
idleconfig |= STEPCONFIG_YNN | STEPCONFIG_YPN;
regmap_write(tscadc->regmap, REG_IDLECONFIG, idleconfig);
}
static int ti_tscadc_probe(struct platform_device *pdev)
{
struct ti_tscadc_dev *tscadc;
struct resource *res;
struct clk *clk;
struct device_node *node;
struct mfd_cell *cell;
bool use_tsc = false, use_mag = false;
u32 val;
int err;
int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
int readouts = 0, mag_tracks = 0;
/* Allocate memory for device */
tscadc = devm_kzalloc(&pdev->dev, sizeof(*tscadc), GFP_KERNEL);
if (!tscadc)
return -ENOMEM;
tscadc->dev = &pdev->dev;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "Could not find valid DT data.\n");
return -EINVAL;
}
tscadc->data = of_device_get_match_data(&pdev->dev);
if (ti_adc_with_touchscreen(tscadc)) {
node = of_get_child_by_name(pdev->dev.of_node, "tsc");
of_property_read_u32(node, "ti,wires", &tscmag_wires);
err = of_property_read_u32(node, "ti,coordinate-readouts",
&readouts);
if (err < 0)
of_property_read_u32(node, "ti,coordiante-readouts",
&readouts);
of_node_put(node);
if (tscmag_wires)
use_tsc = true;
} else {
/*
* When adding support for the magnetic stripe reader, here is
* the place to look for the number of tracks used from device
* tree. Let's default to 0 for now.
*/
mag_tracks = 0;
tscmag_wires = mag_tracks * 2;
if (tscmag_wires)
use_mag = true;
}
node = of_get_child_by_name(pdev->dev.of_node, "adc");
of_property_for_each_u32(node, "ti,adc-channels", val) {
adc_channels++;
if (val > 7) {
dev_err(&pdev->dev, " PIN numbers are 0..7 (not %d)\n",
val);
of_node_put(node);
return -EINVAL;
}
}
of_node_put(node);
total_channels = tscmag_wires + adc_channels;
if (total_channels > 8) {
dev_err(&pdev->dev, "Number of i/p channels more than 8\n");
return -EINVAL;
}
if (total_channels == 0) {
dev_err(&pdev->dev, "Need at least one channel.\n");
return -EINVAL;
}
if (use_tsc && (readouts * 2 + 2 + adc_channels > 16)) {
dev_err(&pdev->dev, "Too many step configurations requested\n");
return -EINVAL;
}
err = platform_get_irq(pdev, 0);
if (err < 0)
return err;
else
tscadc->irq = err;
tscadc->tscadc_base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(tscadc->tscadc_base))
return PTR_ERR(tscadc->tscadc_base);
tscadc->tscadc_phys_base = res->start;
tscadc->regmap = devm_regmap_init_mmio(&pdev->dev,
tscadc->tscadc_base,
&tscadc_regmap_config);
if (IS_ERR(tscadc->regmap)) {
dev_err(&pdev->dev, "regmap init failed\n");
return PTR_ERR(tscadc->regmap);
}
spin_lock_init(&tscadc->reg_lock);
init_waitqueue_head(&tscadc->reg_se_wait);
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
/*
* The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
* ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
* am33xx ADCs expect to capture 200ksps.
* am47xx ADCs expect to capture 867ksps.
* We need ADC clocks respectively running at 3MHz and 13MHz.
* These frequencies are valid since TSC_ADC_SS controller design
* assumes the OCP clock is at least 6x faster than the ADC clock.
*/
clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get fck\n");
err = PTR_ERR(clk);
goto err_disable_clk;
}
tscadc->clk_div = (clk_get_rate(clk) / tscadc->data->target_clk_rate) - 1;
regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
/*
* Set the control register bits. tscadc->ctrl stores the configuration
* of the CTRL register but not the subsystem enable bit which must be
* added manually when timely.
*/
tscadc->ctrl = CNTRLREG_STEPID;
if (ti_adc_with_touchscreen(tscadc)) {
tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT;
if (use_tsc) {
tscadc->ctrl |= CNTRLREG_TSC_ENB;
if (tscmag_wires == 5)
tscadc->ctrl |= CNTRLREG_TSC_5WIRE;
else
tscadc->ctrl |= CNTRLREG_TSC_4WIRE;
}
} else {
tscadc->ctrl |= CNTRLREG_MAG_PREAMP_PWRDOWN |
CNTRLREG_MAG_PREAMP_BYPASS;
}
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
tscadc_idle_config(tscadc);
/* Enable the TSC module enable bit */
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
/* TSC or MAG Cell */
if (use_tsc || use_mag) {
cell = &tscadc->cells[cell_idx++];
cell->name = tscadc->data->secondary_feature_name;
cell->of_compatible = tscadc->data->secondary_feature_compatible;
cell->platform_data = &tscadc;
cell->pdata_size = sizeof(tscadc);
}
/* ADC Cell */
if (adc_channels > 0) {
cell = &tscadc->cells[cell_idx++];
cell->name = tscadc->data->adc_feature_name;
cell->of_compatible = tscadc->data->adc_feature_compatible;
cell->platform_data = &tscadc;
cell->pdata_size = sizeof(tscadc);
}
err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
tscadc->cells, cell_idx, NULL, 0, NULL);
if (err < 0)
goto err_disable_clk;
platform_set_drvdata(pdev, tscadc);
return 0;
err_disable_clk:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return err;
}
static void ti_tscadc_remove(struct platform_device *pdev)
{
struct ti_tscadc_dev *tscadc = platform_get_drvdata(pdev);
regmap_write(tscadc->regmap, REG_SE, 0x00);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
mfd_remove_devices(tscadc->dev);
}
static int __maybe_unused ti_tscadc_can_wakeup(struct device *dev, void *data)
{
return device_may_wakeup(dev);
}
static int __maybe_unused tscadc_suspend(struct device *dev)
{
struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
regmap_write(tscadc->regmap, REG_SE, 0x00);
if (device_for_each_child(dev, NULL, ti_tscadc_can_wakeup)) {
u32 ctrl;
regmap_read(tscadc->regmap, REG_CTRL, &ctrl);
ctrl &= ~(CNTRLREG_POWERDOWN);
ctrl |= CNTRLREG_SSENB;
regmap_write(tscadc->regmap, REG_CTRL, ctrl);
}
pm_runtime_put_sync(dev);
return 0;
}
static int __maybe_unused tscadc_resume(struct device *dev)
{
struct ti_tscadc_dev *tscadc = dev_get_drvdata(dev);
pm_runtime_get_sync(dev);
regmap_write(tscadc->regmap, REG_CLKDIV, tscadc->clk_div);
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
tscadc_idle_config(tscadc);
regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl | CNTRLREG_SSENB);
return 0;
}
static SIMPLE_DEV_PM_OPS(tscadc_pm_ops, tscadc_suspend, tscadc_resume);
static const struct ti_tscadc_data tscdata = {
.adc_feature_name = "TI-am335x-adc",
.adc_feature_compatible = "ti,am3359-adc",
.secondary_feature_name = "TI-am335x-tsc",
.secondary_feature_compatible = "ti,am3359-tsc",
.target_clk_rate = TSC_ADC_CLK,
};
static const struct ti_tscadc_data magdata = {
.adc_feature_name = "TI-am43xx-adc",
.adc_feature_compatible = "ti,am4372-adc",
.secondary_feature_name = "TI-am43xx-mag",
.secondary_feature_compatible = "ti,am4372-mag",
.target_clk_rate = MAG_ADC_CLK,
};
static const struct of_device_id ti_tscadc_dt_ids[] = {
{ .compatible = "ti,am3359-tscadc", .data = &tscdata },
{ .compatible = "ti,am4372-magadc", .data = &magdata },
{ }
};
MODULE_DEVICE_TABLE(of, ti_tscadc_dt_ids);
static struct platform_driver ti_tscadc_driver = {
.driver = {
.name = "ti_am3359-tscadc",
.pm = &tscadc_pm_ops,
.of_match_table = ti_tscadc_dt_ids,
},
.probe = ti_tscadc_probe,
.remove_new = ti_tscadc_remove,
};
module_platform_driver(ti_tscadc_driver);
MODULE_DESCRIPTION("TI touchscreen/magnetic stripe reader/ADC MFD controller driver");
MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink