linux/fs/xfs/scrub/fscounters.c
Darrick J. Wong 549d3c9a29 xfs: pass xfs_buf lookup flags to xfs_*read_agi
Allow callers to pass buffer lookup flags to xfs_read_agi and
xfs_ialloc_read_agi.  This will be used in the next patch to fix a
deadlock in the online fsck inode scanner.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2024-04-15 14:54:03 -07:00

608 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2019-2023 Oracle. All Rights Reserved.
* Author: Darrick J. Wong <djwong@kernel.org>
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_trans_resv.h"
#include "xfs_log_format.h"
#include "xfs_trans.h"
#include "xfs_mount.h"
#include "xfs_alloc.h"
#include "xfs_ialloc.h"
#include "xfs_health.h"
#include "xfs_btree.h"
#include "xfs_ag.h"
#include "xfs_rtbitmap.h"
#include "xfs_inode.h"
#include "xfs_icache.h"
#include "scrub/scrub.h"
#include "scrub/common.h"
#include "scrub/trace.h"
#include "scrub/fscounters.h"
/*
* FS Summary Counters
* ===================
*
* The basics of filesystem summary counter checking are that we iterate the
* AGs counting the number of free blocks, free space btree blocks, per-AG
* reservations, inodes, delayed allocation reservations, and free inodes.
* Then we compare what we computed against the in-core counters.
*
* However, the reality is that summary counters are a tricky beast to check.
* While we /could/ freeze the filesystem and scramble around the AGs counting
* the free blocks, in practice we prefer not do that for a scan because
* freezing is costly. To get around this, we added a per-cpu counter of the
* delalloc reservations so that we can rotor around the AGs relatively
* quickly, and we allow the counts to be slightly off because we're not taking
* any locks while we do this.
*
* So the first thing we do is warm up the buffer cache in the setup routine by
* walking all the AGs to make sure the incore per-AG structure has been
* initialized. The expected value calculation then iterates the incore per-AG
* structures as quickly as it can. We snapshot the percpu counters before and
* after this operation and use the difference in counter values to guess at
* our tolerance for mismatch between expected and actual counter values.
*/
/*
* Since the expected value computation is lockless but only browses incore
* values, the percpu counters should be fairly close to each other. However,
* we'll allow ourselves to be off by at least this (arbitrary) amount.
*/
#define XCHK_FSCOUNT_MIN_VARIANCE (512)
/*
* Make sure the per-AG structure has been initialized from the on-disk header
* contents and trust that the incore counters match the ondisk counters. (The
* AGF and AGI scrubbers check them, and a normal xfs_scrub run checks the
* summary counters after checking all AG headers). Do this from the setup
* function so that the inner AG aggregation loop runs as quickly as possible.
*
* This function runs during the setup phase /before/ we start checking any
* metadata.
*/
STATIC int
xchk_fscount_warmup(
struct xfs_scrub *sc)
{
struct xfs_mount *mp = sc->mp;
struct xfs_buf *agi_bp = NULL;
struct xfs_buf *agf_bp = NULL;
struct xfs_perag *pag = NULL;
xfs_agnumber_t agno;
int error = 0;
for_each_perag(mp, agno, pag) {
if (xchk_should_terminate(sc, &error))
break;
if (xfs_perag_initialised_agi(pag) &&
xfs_perag_initialised_agf(pag))
continue;
/* Lock both AG headers. */
error = xfs_ialloc_read_agi(pag, sc->tp, 0, &agi_bp);
if (error)
break;
error = xfs_alloc_read_agf(pag, sc->tp, 0, &agf_bp);
if (error)
break;
/*
* These are supposed to be initialized by the header read
* function.
*/
if (!xfs_perag_initialised_agi(pag) ||
!xfs_perag_initialised_agf(pag)) {
error = -EFSCORRUPTED;
break;
}
xfs_buf_relse(agf_bp);
agf_bp = NULL;
xfs_buf_relse(agi_bp);
agi_bp = NULL;
}
if (agf_bp)
xfs_buf_relse(agf_bp);
if (agi_bp)
xfs_buf_relse(agi_bp);
if (pag)
xfs_perag_rele(pag);
return error;
}
static inline int
xchk_fsfreeze(
struct xfs_scrub *sc)
{
int error;
error = freeze_super(sc->mp->m_super, FREEZE_HOLDER_KERNEL);
trace_xchk_fsfreeze(sc, error);
return error;
}
static inline int
xchk_fsthaw(
struct xfs_scrub *sc)
{
int error;
/* This should always succeed, we have a kernel freeze */
error = thaw_super(sc->mp->m_super, FREEZE_HOLDER_KERNEL);
trace_xchk_fsthaw(sc, error);
return error;
}
/*
* We couldn't stabilize the filesystem long enough to sample all the variables
* that comprise the summary counters and compare them to the percpu counters.
* We need to disable all writer threads, which means taking the first two
* freeze levels to put userspace to sleep, and the third freeze level to
* prevent background threads from starting new transactions. Take one level
* more to prevent other callers from unfreezing the filesystem while we run.
*/
STATIC int
xchk_fscounters_freeze(
struct xfs_scrub *sc)
{
struct xchk_fscounters *fsc = sc->buf;
int error = 0;
if (sc->flags & XCHK_HAVE_FREEZE_PROT) {
sc->flags &= ~XCHK_HAVE_FREEZE_PROT;
mnt_drop_write_file(sc->file);
}
/* Try to grab a kernel freeze. */
while ((error = xchk_fsfreeze(sc)) == -EBUSY) {
if (xchk_should_terminate(sc, &error))
return error;
delay(HZ / 10);
}
if (error)
return error;
fsc->frozen = true;
return 0;
}
/* Thaw the filesystem after checking or repairing fscounters. */
STATIC void
xchk_fscounters_cleanup(
void *buf)
{
struct xchk_fscounters *fsc = buf;
struct xfs_scrub *sc = fsc->sc;
int error;
if (!fsc->frozen)
return;
error = xchk_fsthaw(sc);
if (error)
xfs_emerg(sc->mp, "still frozen after scrub, err=%d", error);
else
fsc->frozen = false;
}
int
xchk_setup_fscounters(
struct xfs_scrub *sc)
{
struct xchk_fscounters *fsc;
int error;
/*
* If the AGF doesn't track btreeblks, we have to lock the AGF to count
* btree block usage by walking the actual btrees.
*/
if (!xfs_has_lazysbcount(sc->mp))
xchk_fsgates_enable(sc, XCHK_FSGATES_DRAIN);
sc->buf = kzalloc(sizeof(struct xchk_fscounters), XCHK_GFP_FLAGS);
if (!sc->buf)
return -ENOMEM;
sc->buf_cleanup = xchk_fscounters_cleanup;
fsc = sc->buf;
fsc->sc = sc;
xfs_icount_range(sc->mp, &fsc->icount_min, &fsc->icount_max);
/* We must get the incore counters set up before we can proceed. */
error = xchk_fscount_warmup(sc);
if (error)
return error;
/*
* Pause all writer activity in the filesystem while we're scrubbing to
* reduce the likelihood of background perturbations to the counters
* throwing off our calculations.
*
* If we're repairing, we need to prevent any other thread from
* changing the global fs summary counters while we're repairing them.
* This requires the fs to be frozen, which will disable background
* reclaim and purge all inactive inodes.
*/
if ((sc->flags & XCHK_TRY_HARDER) || xchk_could_repair(sc)) {
error = xchk_fscounters_freeze(sc);
if (error)
return error;
}
return xchk_trans_alloc_empty(sc);
}
/*
* Part 1: Collecting filesystem summary counts. For each AG, we add its
* summary counts (total inodes, free inodes, free data blocks) to an incore
* copy of the overall filesystem summary counts.
*
* To avoid false corruption reports in part 2, any failure in this part must
* set the INCOMPLETE flag even when a negative errno is returned. This care
* must be taken with certain errno values (i.e. EFSBADCRC, EFSCORRUPTED,
* ECANCELED) that are absorbed into a scrub state flag update by
* xchk_*_process_error. Scrub and repair share the same incore data
* structures, so the INCOMPLETE flag is critical to prevent a repair based on
* insufficient information.
*/
/* Count free space btree blocks manually for pre-lazysbcount filesystems. */
static int
xchk_fscount_btreeblks(
struct xfs_scrub *sc,
struct xchk_fscounters *fsc,
xfs_agnumber_t agno)
{
xfs_extlen_t blocks;
int error;
error = xchk_ag_init_existing(sc, agno, &sc->sa);
if (error)
goto out_free;
error = xfs_btree_count_blocks(sc->sa.bno_cur, &blocks);
if (error)
goto out_free;
fsc->fdblocks += blocks - 1;
error = xfs_btree_count_blocks(sc->sa.cnt_cur, &blocks);
if (error)
goto out_free;
fsc->fdblocks += blocks - 1;
out_free:
xchk_ag_free(sc, &sc->sa);
return error;
}
/*
* Calculate what the global in-core counters ought to be from the incore
* per-AG structure. Callers can compare this to the actual in-core counters
* to estimate by how much both in-core and on-disk counters need to be
* adjusted.
*/
STATIC int
xchk_fscount_aggregate_agcounts(
struct xfs_scrub *sc,
struct xchk_fscounters *fsc)
{
struct xfs_mount *mp = sc->mp;
struct xfs_perag *pag;
uint64_t delayed;
xfs_agnumber_t agno;
int tries = 8;
int error = 0;
retry:
fsc->icount = 0;
fsc->ifree = 0;
fsc->fdblocks = 0;
for_each_perag(mp, agno, pag) {
if (xchk_should_terminate(sc, &error))
break;
/* This somehow got unset since the warmup? */
if (!xfs_perag_initialised_agi(pag) ||
!xfs_perag_initialised_agf(pag)) {
error = -EFSCORRUPTED;
break;
}
/* Count all the inodes */
fsc->icount += pag->pagi_count;
fsc->ifree += pag->pagi_freecount;
/* Add up the free/freelist/bnobt/cntbt blocks */
fsc->fdblocks += pag->pagf_freeblks;
fsc->fdblocks += pag->pagf_flcount;
if (xfs_has_lazysbcount(sc->mp)) {
fsc->fdblocks += pag->pagf_btreeblks;
} else {
error = xchk_fscount_btreeblks(sc, fsc, agno);
if (error)
break;
}
/*
* Per-AG reservations are taken out of the incore counters,
* so they must be left out of the free blocks computation.
*/
fsc->fdblocks -= pag->pag_meta_resv.ar_reserved;
fsc->fdblocks -= pag->pag_rmapbt_resv.ar_orig_reserved;
}
if (pag)
xfs_perag_rele(pag);
if (error) {
xchk_set_incomplete(sc);
return error;
}
/*
* The global incore space reservation is taken from the incore
* counters, so leave that out of the computation.
*/
fsc->fdblocks -= mp->m_resblks_avail;
/*
* Delayed allocation reservations are taken out of the incore counters
* but not recorded on disk, so leave them and their indlen blocks out
* of the computation.
*/
delayed = percpu_counter_sum(&mp->m_delalloc_blks);
fsc->fdblocks -= delayed;
trace_xchk_fscounters_calc(mp, fsc->icount, fsc->ifree, fsc->fdblocks,
delayed);
/* Bail out if the values we compute are totally nonsense. */
if (fsc->icount < fsc->icount_min || fsc->icount > fsc->icount_max ||
fsc->fdblocks > mp->m_sb.sb_dblocks ||
fsc->ifree > fsc->icount_max)
return -EFSCORRUPTED;
/*
* If ifree > icount then we probably had some perturbation in the
* counters while we were calculating things. We'll try a few times
* to maintain ifree <= icount before giving up.
*/
if (fsc->ifree > fsc->icount) {
if (tries--)
goto retry;
return -EDEADLOCK;
}
return 0;
}
#ifdef CONFIG_XFS_RT
STATIC int
xchk_fscount_add_frextent(
struct xfs_mount *mp,
struct xfs_trans *tp,
const struct xfs_rtalloc_rec *rec,
void *priv)
{
struct xchk_fscounters *fsc = priv;
int error = 0;
fsc->frextents += rec->ar_extcount;
xchk_should_terminate(fsc->sc, &error);
return error;
}
/* Calculate the number of free realtime extents from the realtime bitmap. */
STATIC int
xchk_fscount_count_frextents(
struct xfs_scrub *sc,
struct xchk_fscounters *fsc)
{
struct xfs_mount *mp = sc->mp;
int error;
fsc->frextents = 0;
if (!xfs_has_realtime(mp))
return 0;
xfs_ilock(sc->mp->m_rbmip, XFS_ILOCK_SHARED | XFS_ILOCK_RTBITMAP);
error = xfs_rtalloc_query_all(sc->mp, sc->tp,
xchk_fscount_add_frextent, fsc);
if (error) {
xchk_set_incomplete(sc);
goto out_unlock;
}
out_unlock:
xfs_iunlock(sc->mp->m_rbmip, XFS_ILOCK_SHARED | XFS_ILOCK_RTBITMAP);
return error;
}
#else
STATIC int
xchk_fscount_count_frextents(
struct xfs_scrub *sc,
struct xchk_fscounters *fsc)
{
fsc->frextents = 0;
return 0;
}
#endif /* CONFIG_XFS_RT */
/*
* Part 2: Comparing filesystem summary counters. All we have to do here is
* sum the percpu counters and compare them to what we've observed.
*/
/*
* Is the @counter reasonably close to the @expected value?
*
* We neither locked nor froze anything in the filesystem while aggregating the
* per-AG data to compute the @expected value, which means that the counter
* could have changed. We know the @old_value of the summation of the counter
* before the aggregation, and we re-sum the counter now. If the expected
* value falls between the two summations, we're ok.
*
* Otherwise, we /might/ have a problem. If the change in the summations is
* more than we want to tolerate, the filesystem is probably busy and we should
* just send back INCOMPLETE and see if userspace will try again.
*
* If we're repairing then we require an exact match.
*/
static inline bool
xchk_fscount_within_range(
struct xfs_scrub *sc,
const int64_t old_value,
struct percpu_counter *counter,
uint64_t expected)
{
int64_t min_value, max_value;
int64_t curr_value = percpu_counter_sum(counter);
trace_xchk_fscounters_within_range(sc->mp, expected, curr_value,
old_value);
/* Negative values are always wrong. */
if (curr_value < 0)
return false;
/* Exact matches are always ok. */
if (curr_value == expected)
return true;
/* We require exact matches when repair is running. */
if (sc->sm->sm_flags & XFS_SCRUB_IFLAG_REPAIR)
return false;
min_value = min(old_value, curr_value);
max_value = max(old_value, curr_value);
/* Within the before-and-after range is ok. */
if (expected >= min_value && expected <= max_value)
return true;
/* Everything else is bad. */
return false;
}
/* Check the superblock counters. */
int
xchk_fscounters(
struct xfs_scrub *sc)
{
struct xfs_mount *mp = sc->mp;
struct xchk_fscounters *fsc = sc->buf;
int64_t icount, ifree, fdblocks, frextents;
bool try_again = false;
int error;
/* Snapshot the percpu counters. */
icount = percpu_counter_sum(&mp->m_icount);
ifree = percpu_counter_sum(&mp->m_ifree);
fdblocks = percpu_counter_sum(&mp->m_fdblocks);
frextents = percpu_counter_sum(&mp->m_frextents);
/* No negative values, please! */
if (icount < 0 || ifree < 0)
xchk_set_corrupt(sc);
/*
* If the filesystem is not frozen, the counter summation calls above
* can race with xfs_mod_freecounter, which subtracts a requested space
* reservation from the counter and undoes the subtraction if that made
* the counter go negative. Therefore, it's possible to see negative
* values here, and we should only flag that as a corruption if we
* froze the fs. This is much more likely to happen with frextents
* since there are no reserved pools.
*/
if (fdblocks < 0 || frextents < 0) {
if (!fsc->frozen)
return -EDEADLOCK;
xchk_set_corrupt(sc);
return 0;
}
/* See if icount is obviously wrong. */
if (icount < fsc->icount_min || icount > fsc->icount_max)
xchk_set_corrupt(sc);
/* See if fdblocks is obviously wrong. */
if (fdblocks > mp->m_sb.sb_dblocks)
xchk_set_corrupt(sc);
/* See if frextents is obviously wrong. */
if (frextents > mp->m_sb.sb_rextents)
xchk_set_corrupt(sc);
/*
* If ifree exceeds icount by more than the minimum variance then
* something's probably wrong with the counters.
*/
if (ifree > icount && ifree - icount > XCHK_FSCOUNT_MIN_VARIANCE)
xchk_set_corrupt(sc);
/* Walk the incore AG headers to calculate the expected counters. */
error = xchk_fscount_aggregate_agcounts(sc, fsc);
if (!xchk_process_error(sc, 0, XFS_SB_BLOCK(mp), &error))
return error;
/* Count the free extents counter for rt volumes. */
error = xchk_fscount_count_frextents(sc, fsc);
if (!xchk_process_error(sc, 0, XFS_SB_BLOCK(mp), &error))
return error;
if (sc->sm->sm_flags & XFS_SCRUB_OFLAG_INCOMPLETE)
return 0;
/*
* Compare the in-core counters with whatever we counted. If the fs is
* frozen, we treat the discrepancy as a corruption because the freeze
* should have stabilized the counter values. Otherwise, we need
* userspace to call us back having granted us freeze permission.
*/
if (!xchk_fscount_within_range(sc, icount, &mp->m_icount,
fsc->icount)) {
if (fsc->frozen)
xchk_set_corrupt(sc);
else
try_again = true;
}
if (!xchk_fscount_within_range(sc, ifree, &mp->m_ifree, fsc->ifree)) {
if (fsc->frozen)
xchk_set_corrupt(sc);
else
try_again = true;
}
if (!xchk_fscount_within_range(sc, fdblocks, &mp->m_fdblocks,
fsc->fdblocks)) {
if (fsc->frozen)
xchk_set_corrupt(sc);
else
try_again = true;
}
if (!xchk_fscount_within_range(sc, frextents, &mp->m_frextents,
fsc->frextents)) {
if (fsc->frozen)
xchk_set_corrupt(sc);
else
try_again = true;
}
if (try_again)
return -EDEADLOCK;
return 0;
}